PYD-OUTDOOR Ενδοδαπέδια θέρμανση εξωτερικού χώρου.Το σύστημα θέρμανσης PYD-OUTDOOR είναι η λύση για χρήση σε εξωτερικούς χώρους για να παρέχουν την απαιτούμενη ενέργεια θέρμανσης.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
PYD®-OUTDOORtable for installation, instructions for installation
3
table of material requirements for laying
laying distance in cm 15 20
meters of pipe/m2 6,3 4,7
meters of clip rail /m2 13 10
Instructions for installation
1) Installation of the distance struts and reinforcement steel mesh
2) Installation of PYD® system pipe
3) Connection to the heating circuit distributor
4) Pressure test to controlthe leak tightness of the system
PYD® system pipes are installed on a reinforcement steel mesh onsite. PYD® system pipes are affi xed to the grid of steel rods every 50 cm by means
of cable ties. Doing so, the sizes of the heating circuits as specifi ed in the design are to be attended. Flow and return of every heating circuit are pushed
through the laying angle pipes, cut fi ttingly, and connected to the PYD® heating circuit distributor by means of the PYD® adaptors.
When the heating circuits have been installed, a pressure test to control the leak tightness of the system is performed. The testing pressure should be 6
bar and maintained until the addition of plaster or concrete has been completed.
All parts of the system that are liable to frost have to mandatorily be fi lled with a frost protection solution. Yet, the frost protection solution should be
added after the pressure test has been conducted
Duration of assembly:
In order to install the system in an area of 400 m², 2 fi tters and 1 helper will need approximately one day, in case the subground has
been prepared appropriately. This time specifi cation includes rolling out the PYD® system pipe, affi xing the pipe by means of PYD® cable
ties, and the connection of the pipe to the PYD® heating circuit distributor.
Setting up the PYD® heating circuit distributor and distribution box is estimated to take about 30 minutes.
PYD®-OUTDOOR keeps areas free of snow and ice. Driveways, exits, access roads, ramps, loading zones, parking lots, outdoor circulation
and movement areas, e.g. in front of hospitals, clinics, retirement homes, pedestrian areas, underground parking, and multi- story
garages, just to mention some possible applications, involve an increased risk of accidents by involuntary glissades or the like in the
cold winter months. The reduction of cost and the positive effect on the environment due to the reduction of personnel needed for
maintenance and omission of the use of road salt are to be taken into account, as well.
In tempering outdoor areas, the performance has to be calculated and adjusted individually, according to the desired or planned fl oor
system. Please don’t hesitate to contact us to obtain technical solutions