Rockwell Automation maintains current product environmental
information on its website at
Auxiliary Power Supply (20-750-APS) InstallationA connector
cable is provided with Auxiliary Power Supply option module for use
in PowerFlex 753 Drives and in PowerFlex 755 Frame 1 drives. The
cable is used to connect the module to the backplane when installed
on the upper control pod brackets.
IMPORTANT: Do not use the Auxiliary Power Supply option module
with Frame 8 and larger drives. See the PowerFlex 750-Series AC
Drives Installation Instructions, publication 750-IN001, for
information on the connection of an external power supply to a
Frame 8 and larger drive.
Option Module Installation Next to a PROFIBUS Option Module
11-Series and 22-Series I/O Module InstallationDetail A
PROFIBUS Option Module
20-750-2262C-2R (24V DC)
20-750-2263C-1R2T (24V DC)
20-750-2262D-2R (120V DC)
ATTENTION: When used in an Integrated Motion on EtherNet/IP
network application for firmware revisions 12 and later, both the
11-series and 22-series I/O modules must be installed only in port
7. You cannot use the ATEX card with the 11-series I/O module in
port 7 when used in an Integrated Motion on EtherNet/IP
application.
20-750-1132C-2R (24V DC)
20-750-1133C-1R2T (24V DC)
20-750-1132D-2R (120V DC)
Do not allow the lower T15 Torx™ mounting screw (Detail A) on a
new module to make contact with the metal cable connector of an
installed PowerFlex 20-750-PBUS PROFIBUS option module. Electrical
contact of the two metal parts can cause faulty operation. Perform
these steps to help prevent contact. If a PowerFlex 20-750-PBUS
PROFIBUS option module is not in that port, disregard these
steps.
1. Remove the lower T15 Torx mounting screw (Detail A) from the
new module being installed.
To remove the captive T15 Torx screw, the module must be removed
to back the screw out of the mounting clip.
2. Replace the larger T15 Torx screw with the smaller spare T8
Torx mounting screw that was shipped with the PowerFlex 20-750-PBUS
PROFIBUS option module.
Allen-Bradley, PowerFlex, Rockwell Automation, and Rockwell
Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of
their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok
Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
*PN-509668*PN-509668
Publication 750-IN002I-MU-P - August 2018Supersedes Publication
750-IN002H-MU-P - September 2016 Copyright © 2018 Rockwell
Automation, Inc. All rights reserved. Printed in the U.S.A.
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.pagehttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/750-in001_-en-p.pdf
PowerFlex 750-Series Option Modules Installation
InstructionsCompatible PortsAuxiliary Power Supply (20-750-APS)
InstallationOption Module Installation Next to a PROFIBUS Option
Module11-Series and 22-Series I/O Module InstallationUsing Option
Modules 20-750-S1 / 20-750-S4 with Option Modules 20-750-DENC-1 /
20-750-UFB-1Option Module Installation
Introduction_Category Types
This tab summarizes Rockwell Automation Global Sales and
Marketing preferred printing standards. It also provides guidance
on whether a publication should be released as JIT (print on
demand) or if it requires an RFQ for offset printing.Find your
publication type in the first section below. Use the assigned
Printing Category information to determine the standard print
specifications for that document type. The Printing Categories are
defined below the Publication Type section. Note there may be
slightly different print specifications for the categories,
depending on the region (EMEA or Americas).For more information on
Global Sales and Marketing Printing Standards, see publication
RA-CO004 in DocMan.
Publication Type and Print Category
Publication TypeOff Set Print Category Spec. (See table
below)JIT Spec. (See table below)DescriptionOrder Min **Order Max
**Life Cycle Usage / Release Option
ADNA - PuttmanNAAdvertisement Reprint ColourNANAPresale /
Internal
APA3D2Application Solution or Customer Success Story5100Presale
/ External
ARNANAArticle/Editorial/BylineNANAPresale / Internal
(press releases should not be checked into DocMan or
printed)
ATB3, B4D5Application techniques5100Presale / External
BRA2 Primary, A1NABrochures5100Presale / External
CAC2 Primary, C1NACatalogue150Presale / External
CGNANACatalogue Guide150Presale / External
CLNANACollection550Presale / External
COA5, A6, A9D5Company Confidential InformationNANANA /
Confidential
CPE-onlyE-only, D5Competitive Information550NA /
Confidential
DCE-onlyE-onlyDiscount SchedulesNANAPresale / Internal
DIA1, A3NADirect Mail5100Presale / Internal
DMNANAProduct Demo550Presale / Internal
DSB3D5Dimensions Sheet15Post / External
DUB3D5Document Update15Post / External
GRB2D6Getting Results15Post / External
INB3 Primary, B2D5, D6Installation instructions15Post /
External
LMNANALaunch Materials550Presale / Internal
PCB3D5Packaging Contents
PLE-only primary, B3E-onlyPrice List550Presale / Internal
PMB2D6Programming Manual15Post / External
PPA3D1Profile (Single Product or Service). NOTE: Application
Solutions are to be assigned the AP pub type.5100Presale /
External
QRB2 primary, B3, B5D5, D6Quick Reference15Post / External
QSB2 primary, B3, B5D5, D6Quick Start15Post / External
RMB2D5, D6Reference Manual15Post / External
RNB3D5Release Notes15Post / External
SGB1 Primary, B4D5, D6Selection Guide Colour550Presale /
External
SGB2D5, D6Selection Guide B/W550Presale / External
SPA1, A2, A3, A4NASales Promotion NOTE: Service profiles are to
be assigned the PP pub type.5100Presale / Internal
SRB2, B3D5, D6Specification Rating Sheet5100Presale /
External
TDB2 Primary B3, B4, B5D5, D6Technical Data550Presale /
External
TGB2, B3D6Troubleshooting Guide15Post / External
UMB2 Primary, B4D6User Manual B/W15Post / External
WDB3D5Wiring Diagrams / Dwgs15Post / Internal
WPB3 Primary, B5D5White Paper550Presale / External
** Minimum order quantities on all JIT items are based on the
publication length. **
Publication lengthMinimum Order Quantity
77 or more pages1 (no shrink wrap required)
33 to 76 pages25
3 to 32 pages50
1 or 2 pages100
Pre-sale / MarketingAll paper in this category is White
Brightness, 90% or better. Opacity 90% or better
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US
Paper Requirements
A14 color170 gsm 2pp100# gloss cover, 100# gloss text
A24 color170 gsm , folded, 4pp100# gloss cover, 80# gloss
text
A34 colorCover 170 gsm with Body 120 gsm, > 4pp80# gloss
cover, 80# gloss text
A42 color170gsm Silk – 120gsm Silk80# gloss cover, 80# gloss
text
A52 color170gsm Silk – 120gsm Silk80# gloss cover, 80# matt
sheet text
A61 color170gsm Silk – 120gsm Silk80# gloss cover, 80# matt
sheet text
A74 color cover2 color textSelection GuideCategory being
deleted10 Point Cover C2S50# matte sheet text
A84 color coverCategory being deleted50# matte sheet text, self
cover
2 color text
Selection Guide
A92 color100gsm bond50# matte sheet text, self cover
Selection Guide
Gray shading indicates Obsolete Print Catagories
Post Sale / Technical Communication
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US
Paper Requirements
B14 color cover270gsm Gloss 100gsm bond10 Point Cover C2S
2 color text50# matte sheet text
B21 color160gsm Colortech & 100gsm Bond90# Cover50# matte
sheet text
B31 color100gsm bond50# matte sheet text, self cover
B42 color160gsm Colortech & 100gsm Bond90# Cover50# matte
sheet text
B52 color100gsm bond50# matte sheet text, self cover
Catalogs
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US
Paper Requirements
C14 color cover270gsm Gloss 90gsm silk10 Point Cover C2S
4 color text45# Coated Sheet
C24 color cover270gsm Gloss 80gsm silk10 Point Cover C2S
2 color text32#-33# Coated Sheet
JIT / PODAll paper in this category is White Brightness, 82% or
better. Opacity 88% or better
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US
Paper Requirements
D14 color170gsm white silk80# gloss cover, coated 2 sides
D24 color120gsm white silk80# gloss text, coated 2 sides, self
cover
D34 colorCover 170gsm with Body 120gsm80# gloss cover, 80# gloss
text coated 2 sides
D41 color160gsm tab90# index
D51 color80gsm bond20# bond, self cover
D61 colorCover 160gsm tab with Body 80gsm bond90# index, 20#
bond
D72 color160gsm tab90# index
D82 color80gsm bond20# bond, self cover
D92 colorCover 160gsm tab with Body 80gsm bond90# index, 20#
bond
D10Combination: 4 color cover, with 2 color bodyCover 160gsm
with Body 80gsm90# index, 20# bond
Gray shading indicates Obsolete Print Catagories
Just In Time (JIT) or Off Set (OS)?
Use these guidelines to determine if your publication should be
JIT (just in time/print on demand) or if it would be more
economical to print OS (offset/on a press). OS print jobs require
an RFQ (Request For Quote) in US. If your job fits into the
“Either” category, an RFQ is recommended, but not required. In the
US, RA Strategic Sourcing will discourage or reject RFQs for jobs
that fall within the JIT category. Guidelines differ for black
& white and color printing, so be sure to check the correct
tables.
Black & White Printing
Color Printing
Color Printing
Print Spec Sheet
JIT Printing SpecificationsRA-QR005J-EN-P - 6/14/2013
Printing SpecificationYOUR DATA HEREInstructionsNO
(required) Publication Number:750-IN002I-MU-PSample:
2030-SP001B-EN-P11” x 17”LOOSE -Loose LeafYESPre-sale /
MarketingTOP
Use Legacy Number:NOYES or NO8.5” x 11”PERFECT - Perfect
BoundA1LEFT
Legacy Number if applicable:Sample Legacy Number:
0160-5.338.375” x 10.875SADDLE - Saddle StitchA2RIGHTCORNER
Publication Title:PowerFlex 750-Series Option Modules
Installation InstructionsSample: ElectroGuard Selling Brief80
character limit - must match DocMan Title8.25” x 11” (RA product
profile std)PLASTCOIL - Plastic Coil (Coil Bound)A4BOTTOMSIDE
Used in Manufacturing:YESYES or NO - If Yes, must have Part No.
listed below8.25” x 10.875”STAPLED1 -1 positionA3
Part Number:PN-509668If SAP Part Number, be sure to enter PN-
before the number7.385” x 9” (RSI Std)STAPLED1B - bottom 1
positionA5
(required) CategoryD5Select Print Category A,B,C or D from
category list, on "Introduction_Category Types" tab6” x 4”STAPLED2
- 2 positionsA6
Paper Stock Color:White is assumed. For color options contact
your vendor5.5” x 8.5” (half-size)THERMAL - Thermal bound (Tape
bound)A7
Ink Color:One color assumes BLACK / 4 color assume CMYK /
Indicate PMS number here4.75” x 7.75”THERMALO - Thermal Bound (Tape
bound - offline)A8
(required) Page Count ofPublication:2Total page count including
cover. Enter PAGE count, not SHEET count4.75” x 7” (slightly
smaller half-size)A9
(required) Finished Trim Size Width:8.5” x 11”This is sheet
size, before folding4.25" x 5.50"Post Sale / Technical
Communication
Fold:Half or V or Single FoldReview key below. Leave blank if
folded for saddle stitching4” x 6”B1
Finished Fold Size:8.5" x 5.5"This is size after folding is
completed3” x 5”B2
Binding/Stitching:Review key below9” x 12” (Folder)B3None
Stitching Location:Blank, Corner or SideA4 (8 ¼” x 11 ¾”) (210 x
297 mm)B4Half or V or Single Fold
Drill Hole (Yes/No):NOAll drilled publications use the 5-hole
standard, 5/16 inch-size hole and a minimum of ¼ inch from the
inner page border.A5 (5.83” x 8.26”) (148 x 210 mm)B5C or
Tri-Fold
Number of Tabs Needed:5 tab in stock at RR Donnelley36” x 24”
PosterCatalogsDbleParll
Number of Pages per Pad:Average sheets of paper. 25, 50 75,100
Max24” x 36” PosterC1Sample
Glue Location on Pad:Glue location on pads18” x 24”
PosterC2Short (must specify dimensions between folds in
Comments)
(required) Business Group:Marketing CommercialAs entered in
DocManJIT/PODZ or Accordian Fold
(required) Cost Center:19134 - Power CIf your Business Unit is
Marketing Commercial, add the appropriate division name after 19134
using the chart on the right. All other Business Units: Enter only
the number as in DocMan, no description. Example - 1902119134 -
Commerc 19134 - OEM 19134 - Compone 19134 - Power C19134 - Global
19134 - Process 19134 - IA 19134 - Service 19134 - IMC 19134 -
Safety 19134 - Industr 19134 - Softwar19134 - Mkt Dig 19134 - US
MarkeD1Microfold or French Fold - designate no. of folds in
Comments - intended for single sheet only to be put in box for
manufacturing
Comments:D2Double Gate
FoldsHalf, V, Single C or Tri
Dble Parll
Z or Accordian Microfold or French
Double Gate
Short FoldSaddle-Stitch Items All page quantities must be
divisible by 4.Note: Stitching is implied for Saddle-Stitch -no
need to specify in Stitching Location.80 pgs max. on 20# (text and
cover)76 pgs max. on 20# (text) and 24# (cover)72 pgs max. on 24#
(text and cover)
Perfect Bound Items940 pgs max. w/cover (90# index unless
indicated otherwise)70 pgs. min. for spine without words200 pgs
min. for spine with words
Plastcoil Bound Items530 pgs max. of 20# (if adding cover deduct
equivalent number of pages to equal cover thickness) (90# index
unless indicated otherwise)
Tape Bound Items250 pgs max. on 20# no cover240 pgs max. w/cover
(90# index unless indicated otherwise)D3
D4
D5
D6
D7
D8
D9
MBD000B020A.bin
MBD000B020C.bin
MBD000B020B.bin
MBD000B0206.bin
MBD000B0208.bin
MBD000B0209.bin
MBD000B0207.bin
MBD000B0204.bin
MBD000B0205.bin
MBD000B0203.bin
/ColorImageDict > /JPEG2000ColorACSImageDict >
/JPEG2000ColorImageDict > /AntiAliasGrayImages false
/CropGrayImages true /GrayImageMinResolution 300
/GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true
/GrayImageDownsampleType /Average /GrayImageResolution 300
/GrayImageDepth -1 /GrayImageMinDownsampleDepth 2
/GrayImageDownsampleThreshold 2.00000 /EncodeGrayImages true
/GrayImageFilter /DCTEncode /AutoFilterGrayImages false
/GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict >
/GrayImageDict > /JPEG2000GrayACSImageDict >
/JPEG2000GrayImageDict > /AntiAliasMonoImages false
/CropMonoImages true /MonoImageMinResolution 1200
/MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true
/MonoImageDownsampleType /Average /MonoImageResolution 1200
/MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000
/EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode
/MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None
] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false
/PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000
0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true
/PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ]
/PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier ()
/PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped
/False
/CreateJDFFile false /Description > /Namespace [ (Adobe)
(Common) (1.0) ] /OtherNamespaces [ > /FormElements false
/GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks
false /IncludeInteractive false /IncludeLayers false
/IncludeProfiles true /MultimediaHandling /UseObjectSettings
/Namespace [ (Adobe) (CreativeSuite) (2.0) ]
/PDFXOutputIntentProfileSelector /NA /PreserveEditing true
/UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling
/LeaveUntagged /UseDocumentBleed false >> ]>>
setdistillerparams> setpagedevice