Publication 520-IN008B-EN-P - September 2013 Installation Instructions PowerFlex 520-Series IP30/NEMA 1/UL Type 1 Kit Installation Catalog Numbers: 25-JBAA, 25-JBAB, 25-JBAC, 25-JBAD, 25-JBAE Retainer clip included with all IP30/NEMA 1/ UL Type 1 Kits Frame A – 25-JBAA Frame E – 25-JBAE Frame C – 25-JBAC Frame D – 25-JBAD Frame B – 25-JBAB 1 2 3 L1 L2 L3 O I DC+ DC– 0V 0V Wait three minutes after shutdown for capacitors to discharge to safe voltage levels. Connect the Retainer Clip to the Control Module Front Cover 4 Install the Conduit Box For Frame A For Frame B...D a b c d e a b c d e f f g
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Installation Instructions
PowerFlex 520-Series IP30/NEMA 1/UL Type 1 Kit InstallationCatalog Numbers: 25-JBAA, 25-JBAB, 25-JBAC, 25-JBAD, 25-JBAE
Retainer clip included with all IP30/NEMA 1/UL Type 1 Kits
Frame A – 25-JBAA Frame E – 25-JBAEFrame C – 25-JBAC Frame D – 25-JBADFrame B – 25-JBAB
1 2 3
L1 L2 L3
O
I
DC+ DC–
0V
0V
Wait three minutes after shutdown for capacitors to discharge to safe voltage levels.
Connect the Retainer Clip to the Control Module Front Cover
4 Install the Conduit BoxFor Frame A For Frame B...D
a
b
c
d
e
a
b
c
de
f
f g
Publication 520-IN008B-EN-P - September 2013
PowerFlex 520-Series IP30/NEMA 1/UL Type 1 Kit
5
Screw Size and Torque
Frame Conduit Box Conduit Box Front BracketScrews Screw Torque Screws Screw Torque
A 2 x M3 0.39...0.588 Nm (3.47...5.2 lb-in) 1 x M3 0.39...0.588 Nm (3.47...5.20 lb-in)B 2 x M3 0.39...0.588 Nm (3.47...5.2 lb-in) 1 x M3 0.39...0.588 Nm (3.47...5.20 lb-in)C 2 x M3 0.39...0.588 Nm (3.47...5.2 lb-in) 1 x M3 0.39...0.588 Nm (3.47... 5.20 lb-in)D 2 x M3 0.39...0.588 Nm (3.47...5.2 lb-in) 1 x M3 0.39...0.588 Nm (3.47... 5.20 lb-in)E 2 x M4 1.176...1.372 Nm (10.41...12.15 lb-in) 1 x M3 0.39...0.588 Nm (3.47...5.2 lb-in)
4 Install the Conduit Box (continued)For Frame E
a
c
d
ef
Attach the IP30/NEMA 1/UL Type 1 Cover
b
51.1 (2.01)21.0 (0.82)
135.
4 (5
.33)
111.
9 (4
.41)
88.2
(3.4
7)64
.7 (2
.55)
ø21.5 (ø0.85)
66.1 (2.60)63.1 (2.48)
33.5 (1.32)23.9 (0.94)
128.
5 (5
.06)
108.
5 (4
.27)
88.3
(3.4
8)67
.3 (2
.65)
ø21.5 (ø0.85)
ø27.5 (ø1.08)
123.
3 (4
.85)
82.2
(3.2
4)
80.5 (3.17)66.5 (2.62)
34.5 (1.36)26.5 (1.04)
ø21.5 (ø0.85)
ø27.5 (ø1.08)
109.
8 (4
.32)
153.
3 (6
.04)
96.0 (3.78)
44.0 (1.73)30.0 (1.18)
70.0 (2.76)
ø21.5 (ø0.85)
ø33.5 (ø1.32)
127.5 (5.02)82.5 (3.25) 62.5 (2.46)
42.5 (1.67)
212.
0 (8
.35)
181.
0 (7
.13)
164.
0 (6
.46)
ø21.5 (ø0.85)ø43.7 (ø1.72)
c
92.7
(3.6
5)
d e
b
a
Frame a b c d eA 172 (6.77) 234 (9.21) 110.8 (4.36) 67.0 (2.64) 6.0 (0.24)B 172 (6.77) 233 (9.17) 103.4 (4.07) 38.0 (1.50) 6.1 (0.24)C 184 (7.24) 270 (10.63) 102.7 (4.04) 35.0 (1.38) 6.0 (0.24)D 212 (8.35) 310 (12.20) 105.6 (4.16) 35.0 (1.38) 6.0 (0.24)E 279 (10.98) 365 (14.37) 117.8 (4.64) 50.0 (1.97) 7.6 (0.3)Note: Frames D and E cannot be mounted on DIN-rails.
Frame B – 25-JBAB
Frame A – 25-JBAA
Frame C – 25-JBAC
Frame D – 25-JBAD Frame E – 25-JBAE
Dimensions All dimensions are in mm (in.)
ab
Publication 520-IN008B-EN-P - September 2013Supersedes Publication 520-IN008A-EN-P - December 2012 Copyright © 2013 Rockwell Automation, Inc. All rights reserved.
Allen-Bradley, Rockwell Software, Rockwell Automation, PowerFlex, and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, E-mail: [email protected]: http://www.ab.com/support/abdrives
Related Documents
