Publication 520-IN013B-EN-P - July 2019 Installation Instructions PowerFlex 527 Incremental Encoder Input Catalog Number: 25-ENC-2 1 L1 L2 L3 O I 2 DC+ DC– 0V 0V Encoder cover Incremental Encoder Input Wait three minutes after shutdown for capacitors to discharge to safe voltage levels. Voltage DIP switch HTL/TTL DIP switches 3 4 Align Tabs of Encoder with the slots on the Control Module Press Down Firmly to Lock Incremental Encoder onto the Control Module G 3 H E 5014018501 2019-06
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
IMPORTANT Do not remove the encoder from the bottom as it might damage the encoder and the locking mechanism on the control module.
(1) When using 12V Encoder power, 24V I/O power, maximum output current at I/O Terminal 11 is 50 mA.(2) If Encoder requires 24V power, it must be supplied by an external power source.
Allen-Bradley, PowerFlex, Rockwell Automation, Rockwell Software, and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, E-mail: [email protected]: https://www.rockwellautomation.com/global/support/overview.page Rockwell Automation maintains current product environmental information on its website athttps://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page