OME KACE Integration Whitepaper

7/31/2019 OME KACE Integration Whitepaper

1/18

7/22/12

OpenManage Essentials Hardware

Monitoring and KACE K1000 Service

Desk Integration

This Dell Technical White Paper provides step-by-step instructions toconfigure OpenManage Essentials and KACE Service desk for systemmonitoring and fault resolution.

Rajaneesh Shresta, Sean Kim

Dell Enterprise Product Group

This white paper is for informational purposes only, and may contain typographical errors andtechnicalinaccuracies. The content is provided as is, without express or implied warranties of any kind.


2/18

7/22/12

Executive summary

Customers already using KACE K1000 appliance to manage their client (Workstations,

Desktops, laptops etc.) environment can leverage OpenManage Essentials (OME), a free

Dell application to manage their server environment. By integrating KACE and OME,

customers can leverage their existing investment in KACE to extend KACE service desk for

server fault management without any additional investment.

As part of OME and KACE K1000 Service Desk integration, Users will need to:

Configure E-mail Alert action in OME that gets triggered when an Alert is received(Based on the filters set such as Alert Severity, Alert Category, Device/Device

group etc.) Configure Service Desk in KACE K1000 appliance to parse the Email received from

OME and create a trouble ticket.

Validate the configuration by sending a Test Email from OME.

Contents

Introduction 3

Why OME Hardware Monitoring and KACE Service Desk Integration ? 3

Interaction between OME and KACE 4

Configuration 4

Create an E-mail Alert Action in OME 5

Configure KACE K1000 Service Desk 14

Sample Workflow of Alert received in OME and KACE Service Desk Ticket created.. 16

Conclusion or Summary 18

ii OpenManage Essentials Monitoring and KACE K1000 Service Desk Integration


3/18

7/22/12

Introduction

In any I/T environment, to have data accessibility 24/7 and reduce disruptions

to the data center, it is essential to proactively monitor system health, identify

faults and automatically notify I/T administrators for immediate resolution of

these faults. Dell OpenManage Essentials (OME) allows I/T organizations to

actively monitor Dell servers and non-Dell Servers1and other devices via

industry standard SNMP and IPMI protocols. By configuring devices to send SNMP

traps/alerts and IPMI Platform Event Traps(PET) to an OME management

station, OME acts as a centralized monitoring application. Once an alert is

received by OME, users can apply filters to determine if it requires

administrative intervention.

Many I/T organizations have implemented a centralized mechanism for tracking

and handling these server faults such as hard drive failure, loss of network

connection etc. These server faults are typically managed through a Service

Desk or a Help Desk. KACE 1000 Service Desk can receive alerts information

from OME, open a trouble ticket and assign it to an IT administrator for

remediation. Information contained within the alert is assigned into the

appropriate fields within the email that will generate the ticket so that the

necessary reference information is available to the assigned administrator. In

this fashion, complete control can be maintained for those faults that require

intervention and remediation.

1Supported only if the corresponding MIB is imported into OME.

Why OME Hardware Monitoring and KACE Service

Desk Integration ?

Ever increasing demands in computing infrastructure is presenting new

challenges to I/T administrators. Efficient, high-quality support and proactively

monitoring computing infrastructure is critical for the achievement of I/T

organizations worldwide. When a server, storage or a network device has a

problem, I/T administrators want to be notified immediately and more

importantly want their problem solved.

Imagine a situation when a problem occurs in a datacenter while the I/T admin

is out for lunch or on holiday or it is just after 9 p.m. No matter how severe the

problem is, I/T administrator should be notified so that they can take

immediate action and reduce the risk of significant disruption to I/T services.

3 OpenManage Essentials Monitoring and KACE K1000 Service Desk Integration


4/18

7/22/12

In this whitepaper, we will address some of these challenges with Dell new

systems management solution. Dell OpenManage Essentials combined with Dell

| KACE K1000 Appliance, provides a simple and comprehensive approach to

proactively monitor your datacenter and track the resolution of a component

failure and record what we have learned.

Interaction between OME and KACE

The following diagram illustrates how these two products interact to provide a

monitoring and service desk solution.

Figure 1.Interaction between OME Monitoring solution and KACE K1000 applianceService Desk

Configuration

This section provides step-by-step instructions to configure OME console and

KACE appliance for system monitoring and fault resolution.

Create an E-mail Alert Action in OME Configure KACE K1000 Service Desk



5/18

7/22/12

Create an E-mail Alert Action in OME

Follow the numbered steps to create an E-mail alert action in OME.

Step 1: Launch the OME console and select Manage -> Alerts

1a: In the left pane, select Alert Actions->

Email 1b: Right click on Email and select New Email Alert Action OR right

click onone of the sample pre-canned alert action and select Edit.

Figure 2.Launching E-mail Alert Action wizard



6/18

7/22/12

Step 2: In Name and Description, provide e-mail alert action name and description.Check Enabled checkbox and Click Next.

Figure 3.Name and Description in E-mail Alert Action wizard



7/18

7/22/12

Step 3: In E-mail Configuration screen,

3a: provide the recipients of this e-mail and sender in To: and From:addressfields.NOTE 1: Make sure the To e-mail address in OME matches Email Address in

KACE Service Desk Configuration (as OME will be sending an e-mail to KBOX).

Refer to Figure 10.NOTE 2: Verify that the e-mail address in From field in OME (user sending the

ticket into the KBOX service queue) matches exactly the e-mail address defined

for that user in the KACE appliance.

NOTE 3: Separate each recipient or distribution list with a semi-colon.

3b: Provide aSubject.

3c: In the Message field, create a map of KACE service desk and OMEpre-defined alert substitution parameters. For each of the supported parameters

the Email alert action fetches alert data and assigns it to the correspondingparameters on the KACE Service Desk trouble ticket. Refer to KACE K1000

Service Desk Administrator Guide for more information on Customizing Service

Desk Tickets.

Ex: @machine=$n

@custom_1=$st

@create_date=$d $t

@priority=$sev

@category=$cn

NOTE 1: Parameters prefixed with @ are defined in the KACE Service Desk.

NOTE 2: Parameters prefixed with @ must be defined first in the messagesection of the Alert Email Action wizard and each parameter has to be in a new

line.

NOTE 3: Parameters prefixed with $ are defined in OME and are substituted

with actual value when E-mail alert action is triggered.

3d: Click Email Settings and provide SMTP server name or IP Address.

NOTE 4: Make sure KBOX and OME is using the same SMTP server

name/address.

3e: Validate the configuration using the Test Action button. This should send a

sample e-mail to the all the recipients. Click Next.



8/18

7/22/12

Figure 4.E-mail Configuration in E-mail Alert Action wizardNote: Address in the To: field will be the E-mail address of the service queue in KBOX

where the service desk tickets will be logged.



9/18

7/22/12

Step 4: In Severity Association, assign the alert severity to which you want to

associate this e-mail alert and then click Next.

Figure 5.Select Severity Association in E-mail Alert Action wizard



10/18

7/22/12

Step 5: In Categories and Sources Association, assign the alert categories source to

which you want to associate this e-mail alert and then click Next.

Figure 6.Select Alert Categories in E-mail Alert Action wizard



11/18

7/22/12

Step 6: In Device Association, assign the device or device groups to which you want toassociate this e-mail alert and then click Next.

Figure 7.Select Devices in E-mail Alert Action wizardNOTE: By default the E-mail Alert action created is active at all times.



12/18

7/22/12

Step 7: In Date Time Association, enter the date or time range on when this Emailalert action is active and then click Next.

Figure 8.Date Time Association in E-mail Alert Action wizard



13/18

7/22/12

Step 8: In Summary, review inputs and click Finish.

Figure 9.Review configuration in E-mail Alert Action wizard



14/18

7/22/12

Configure KACE K1000 Service Desk

Follow the numbered steps to configure Service Desk in KACE K1000 appliance.

Step 1: In the KACE K1000 appliance, select Service Desktab and chose the service

queue.

1a: Select Configuration-> Queues and select theQueue.

1b: Enter the EmailAddress.

NOTE 1: Make sure the Email Address in KBOX matches To: email address in OME

Email Alert Action.

Figure 10.KACE K1000 Service Desk Configuration



15/18

7/22/12

Step 2: From the Ticket Layout section of the Service Desk Customization page you can

customize the way tickets are displayed in the Tickets tab for each queue.

Examples: You can create different ticket views and set read/write access for users,

ticket owners, and administrators. Refer to KACE K1000 Service Desk Administrator

Guide for more information on Customizing Service Desk Tickets.

To customize Service Desk ticket related parameters.

2a: Select Service Desk -> Configuration -> Queues -> ->Customize Fields andLayout link.

2b: Select the Name you like to customize and set the label andpermissionsfrom the dropdownlist.Example:

Name: CUSTOM_2

Label: Service Tag

Required: Not Required

Permissions: User Create

2c: You can also define the Name type, assign default value to a Name etc.

under Custom Fieldssection.Example:

Name: CUSTOM_2

Type: Text

Default: Unknown

Figure 11.Define custom fields/parameters in KACE K1000 Service DeskConfiguration



16/18

7/22/12

Step 3: You can configure new Alert Category in KBOX to match alert categories

supported by OME. Alert category identifies the type of device/component/application

that generated the alert.

Example: Temperature related alerts will be under Environmental alert category.

To add new alert category: 3a: To configure Alert Category, select Service Desk ->

Configuration ->Queues -> -> Ticket Defaults: [Customize TheseValues] link.

3b: To add a new alert category, select + icon on the top right underCategoryValuessection.

3c: Provide the Name, Label and set Default Owner, User Settableproperties.Example:Name: Environmental

Label: Environmental

Default Owner: OMEAdmin

User Settable: True

Sample Workflow of Alert received in OME and KACE

Service Desk Ticket created.

OME receives a critical alert from a monitored server and triggers E-mail alert action

which in turn collects alert data and sends an e-mail to KACE service desk.

Figure 12.OME Dashboard showing Alerts received



17/18

7/22/12

The E-mail received is parsed by KACE Service Desk. It then creates a Service Desk

ticket under OME service queue based on the criteria set.

Figure 13.List of Service Desk Tickets in K1000 appliance

Click on the Service Desk Ticket to view the details.

Figure 14.Service Desk Ticket in K1000 appliance



18/18

7/22/12

Conclusion or Summary

Users can have both OME and KACE K1000 appliance running on the same physical

machine. This can be achieved by having multiple virtual machines (VM) on the same

physical machine, where one of the VM will have OME installed and the other VM for

K1000 virtual appliance. By adding OME, a simple free solution to your environment,you can get hardware monitoring in your KACE environment.

Learn more

Visit www.dell.com/ome or www.delltechcenter.com/ome for more information on

Dell OpenManage Essentials.

About the author

Rajaneesh Shresta works for Dell Systems Management Consoles Group as one of theLead Engineers. Author has over12+ years of industry experience in developingsoftware and solutions. He has an M.S. in Software Systems from Birla Institute of

Science & Technology, India.

Sean Kim is a Test Associate Engineer working in Enterprise Platform & Software

Validation with over 10 years of experience with network and desktop support. He is a

Microsoft Certified Professional with an associates degree in microelectronic

engineering.

2011 Dell Inc. All rights reserved. Dell and its affiliates cannot be responsible for errors or omissions intypography or photography. Dell and the Dell logo are trademarks of Dell Inc. Microsoft, Windows, and the

Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries. Intel and Xeon are registered trademarks of Intel Corporation in the U.S. and other

countries. Other trademarks and trade names may be used in this document to refer to either the entities

claiming the marks and names or their products. Dell disclaims proprietary interest in the marks and names

of others.

November 2011 | Rev 1.0


OME KACE Integration Whitepaper

Documents