WL 150 & WL 200 Wafer Handler for Microscopy The WL Series Wafer Handler is a safe, semiautomatic wafer loader designed for use with virtually all major microscopes, optics and inspection devices. It is a portable, economically priced tool which serves as a direct replacement for Irvine Optical Ultrastation systems. The WL Wafer Handler comes in two configurations to handle 3" - 6" wafers (WL 150) or 4" - 8" (WL 200) wafer sizes. The series is designed for easy operation, seamless integration, and consistent, reliable handling for labs and automated workstations. SPECIFICATIONS Throughput 750 WPH (Load + Unload) Reliability >2,500 hours (MTBF) 150 hours (MTBA) 50,000 wafers (MWBD) Wafer Size WL150 system (4"- 6") / WL200 system (4"-8") Power 120 or 240VAC / 50/60 Hz, single phase 500 watts / 4.6 amps Vacuum Minimum 23 in/hg Footprint WL150: 77 cm x 51.25 cm x per customer scope WL 200: 79.5 cm x 61.5 cm x per customer scope Weight 21 lbs (9.25 kg) FEATURES Loads 3", 4", 5" and 6" wafers (model WL 150) or 4”, 5", 6"and 8" wafers (model WL 200) High throughput > 750 WPH Uses "smart" stepper motors for drive axis Stall and fault detection Linear stages provide smooth, repeatable motion Spring loaded counterbalance supports load to protect Z-axis mechanism User-defined inspection positions Vacuum touch end effector with sensing Multiple programs Intuitive touch screen interface System provided with HMI (Human Machine Interface) and numeric keypad Remote pendant controller included HMI housed in mountable enclosure with standard VESA interface www.mcbaininstruments.com 9601 Variel Ave., Chatsworth, CA 91311 818-998-2702 800-675-4356 [email protected]