MOTI JOHNSON.docx

MOTI JOHNSON**** *. ******* ***CHICAGO, IL, USACell (773)***-****[email protected]

PROFESSIONAL SUMMARYQuality Engineer (degreed) with fifteen (15+) years experience in Manufacturing, Machining, Hydraulics and Molding industry with emphasis in Automotive, Heavy Vehicles, Military, Industrial and Commercial Equipment, Plastics and Rubber Molding , Metal Casting and Stamping, Assemblies. Responsibilities have encompassed coordinating process and quality improvement programs, client interfacing, coordinated corrective and preventive activities, and product trials and product development activities. Have a thorough knowledge of in ISO 9001:2008/ TS 16949:2009, ASTM/AINSI specs, APQP/PPAP management (FMEA, CTRL PLAN CAP STUDIES, PROCESS DOCUMENTATION) defect management, supplier development, SPC systems (ASI DataMyte) optical/CMM, multi-Sensor Gauging (OGP System), IMDS and military procedures, internal / external audits and supplier development with emphasis on real time systems management.

PROFESSIONAL EXPERIENCE2009 To-dateAND Staffing [ Contract ]Contract services to the manufacturing industry. • Preparing PPAP Kits• Conducting Internal Audits• Preparation of ISO 9001-2008:TS16949:2009 Documentation

2003 to 2009EJ BASLER CORPORATION, Schiller Park, ILManufacturers of Machined parts and Assemblies for Eaton, Ford, John Deere, Navistar, Catepillar, Parker Hannifin, Sauer Danfoss, Kohler and the Military.Sr. Quality Engineer• Coordinating Process and Quality improvement programs in Manufacturing, Inspection, Gauging and Tooling• Coordinated Start-up programs for new products • Started the Pow Wow Programs • Preparation of PPAP documentation• Performing Feasibility/Capability Studies• SPC/Minitab coordinator coordinated programming and setting up of SPC Stations on the Prod. Floor [ real time gauging ]• Developed and coordinated a real time CAR management system• Programmed the OGP Flash 300 Optical/CMM system

• Was the MDS coordinator for EJ Basler• Managed Supplier development programs• Performing Internal and External audits • Conducting supplier audits to improve in-coming PPM levels• Evaluating supplier performance for QIP• Supplier PPAP evaluation • Coordinated APQP and Poke-Yoke activities• Administer and coordinated Corrective and Preventive Actions• Coordination and Implementation of ISO9001:2008 activities • Performance evaluation of production equipment• Release of approved inspection procedures and inspection methodology to manufacturing• Documentation control of Customer Product Specification and releases• Coordinated performance evaluation of processes for quality improvement projects• Customer and Supplier liaison and conducted Internal and external audits• Have attended Green Belt Training

2002 to 2003SOLAR CORPORATION, Libertyville, IL Tier 1 suppliers of automotive products to General Motors, Chrysler and FordAutomotive Quality Engineer• Manufactured automotive interior garnishes and molded thermoplastic products• Coordinated all process and quality improvement programs• Coordinated APQP and PPAP activities• Administer and coordinated corrective and preventive activities• Performed run-at-rate audits at suppliers for new releases • Carried out performance evaluation for new equipment and processes before release to manufacturing• Coordinated new and existing quality programs• Conducted Poke-Yoke activities with Manufacturing• Was involved with ISO/QS 9000 activities• Was involved in supplier development activities• Customer and Vendor Liaison• Supervise the Quality team of supervisors and inspectors

1998 to 2002 CHICAGO-ALLIS MANUFACTURING CORP, Chicago, IL Tier 1 supplier of water pump mechanical seals and assemblies, seal packings, molded rubber and plastic productsManufacturing Engineer • Suppliers to General Motors, General Electric, Navistar, Caterpillar and Cummins• Providing technical support to manufacturing• In charge of product development and improvement activities towards production processes,

molding and tooling• Coordinated Product start-up for new releases • Implemented ISO/QS 9000 procedures at Chicago Allis• Managed all PPAP activities for new products• Performed feasibility and capability studies• Coordinated tool cost activities, tool life and tool management programs• Spearheaded APQP and internal Audit programs• Maintenance of CAD [ Autocad ] data and SOPs• Customer and vendor Liaison• Supplier development programs for new suppliers • Equipment and Instrument Calibration• Carried out performance evaluation of suppliers and instituted corrective and preventive actions programs

1991 to 1998 ROBERT BOSCH SR, Manufacturing Engineering Operations, Malaysia Tier 1 suppliers to Mercedes Benz, BMW , Ford, Volvo. Manufacturers of automotive products Automotive Quality Engineer

• K-2, K-4 Division• Actuator motors, Lamps and Wiring Harness, SMT/PCB Assy• Responsible for product trials and product development activities• Spearheaded ISO 9000 implementation for the Malaysian facility• Responsible for conducting internal and external audits• Oversaw product quality assurance and inspection planning• Developed Supplier process Audits• Managed PPAP programs till release of product lines• Customer and Vendor liaison• Involved in Test equipment evaluation, Installation and upgrades• Developed Supplier vendor programs which helped product development and improvement activities in production process and toolingSpecial Projects:• Coordinated the design and installation of a complete robotic assembly line for the assembly of Power window Electronic Brush holders• Coordinated the design and installation of the assembly line for vent actuator motors

EDUCATIONUNIVERSITY OF MADRAS, IndiaBachelor Degree in Science / Majored in Physics

INSTITUTE OF ENGINEERS, India

AMIE MECH-Manufacturing Engineering

INSTITUTE OF MANAGEMENT, IndiaMasters in Business Administration

INSTITUTE OF MANAGEMENT, IndiaDiploma in Computer Science and Programming

G.RASALIN JULIUS,

119/24, Earikkarai Street,

East Tambaram, E-mail: [email protected]. Chennai-59. Mobile: 91-9840928687

RESUME HEADLINE

Bachelor degree in Mechanical Engineering with 4 years experience in Aluminum foundry, Press shop & CNC Machine shop as a Senior Engineer – Quality Assurance.

CAREER OBJECTIVE:

To be associated with an organization that provides an opportunity to apply knowledge and skills in order to abreast with latest trends and technologies and to be part of the team that works towards the growth of the organization

.

INSTRUMENTS HANDLED:

Coordinate measuring machine (CMM), Height Master Spectrometer, Microscope, Profile Projector Micro-Computer Universal Testing Machine Sand Testing Machine like Universal transfer strength machine Electric permeability Meter, Sand Siever, Gas Deterinator and L.O.I Rockwell Hardness tester, Brinell Hardness tester, Portable Hardness tester Roughness tester, Digital Inside, Outside and Thickness calipers All types of Vernier Calipers ,Micro meters and Dial Calipers

Experiences:

DAERIM ENTERPRISE AUTOMOTIVE INDIA PVT LTD,

1. M/S, Daerim Enterprise Automotive India Private Ltd, Making aluminum cylinder head casting from LPDC machine, machining and Tier 1 Supplier for Hyundai

Motors India. and General Motor, An ISO/TS 16949: 2002 and ISO 14001 :2004 Organization.

Designation : Sr.Engineer-Quality Assurance (In House & Supplier)

Tenure : Since March 2008.-Till Date

CMP-IR INDIA PRIVATE LIMITED,

M/s CMP-IR India pvt ltd., is engaged with manufacturing and exporter of Sheet Metal Pressed Components and Tubular components used for automotive applications

Designation : Engineer-Quality

Tenure : July 2005 – Feb 2008(2Yr &7 Months)

Customer : Industrial Del Recembio (SPAIN) & Caucho Metal Products (SPAIN)

JOB DESCRIPTION:

Monitoring and enhancing the product Quality. Maintaining Quality and System Record. Sample submission as per customer requirements & submission of relevant

documents.

Evaluating the new vendors. Upgrading the existing vendors by Auditing. Internal auditor for ISO/T.S 16949 & ISO14000. Preparing Inspection plans Ensure the checking adds for critical characteristics. Implement of SPC on the shop floor Active cross functional team member. Man Management skill at Quality department. Executing Calibration Plan for Instruments and gauges (MMD). Introducing of Poke Yoke in fixture. 5S implementation in standard room and company. Ensure availability of resource in Quality Department.

Quality/Quality Systems:

Preparing ISAR and PPAP Documents Individually. Knowledge in Quality System procedure Conducting internal system audits. Preparing the APQP, SPC& MSA etc... Monitoring all the variable parameter using control charts.

Vendor Development:

Identification of suitable vendor Vendor Audit and Evolution. Vendor Development Activities. Prepared monthly Vendors rating. Conducting Vendor development meetings.

ACHIEVEMENTS:

Reduce the in-house rejection from 3.5% to below 2%. Introduced many special gauges and fixture which reduced inspection time

successfully implemented cost savings scheme.

ACADEMIC PROFILE :

v B.E. in Mechanical Engg. – The Rajaas Engineering College, Tirunelveli, Anna University

First Class (69%) (2002 – 2005).

v Dip. in Automobile Engg. – K.N.S.K Polytechnic, Nagercoil. First Class with Honors (79%)

(1999 – 2002).

ADDITIONAL QUALIFICATIONS:

AUTO CAD MS Office CNC Programming in Milling & Lathe.

PROFESSIONAL TRAINING UNDERGONE:

ISO/TS 16949 & ISO 14000 - Fouryes TQM Consultants ISO/TS 16949 & ISO 1400 training and certified - Fouryes TQM Consultants

as internal auditor

Problem Solving & Decision Making - NIQR APQP & PPAP - Maxwell 7 QC Tool - ABK – Aots Dosokai

PERSONAL DETAILS:

Father’s Name : Mr.R.Gnanadhas

Date of birth : 09/07/1981

Gender : Male

Marital status : Single

Language known : English, Tamil & Malayalam

Permanent address : D 48, Bazaar Street,

Thittuvilai, Boothapandy post,

Kanyakumari Dist,

Tamilnadu – 629 852.

1. : 04652 – 395813 / 694760.

Passport No : F9121136

When you call, don't forget to mention that you found this ad on OLX.in

Quality Engineer

CURRICULAM VITAE

K.Shyam,S/O T.R.Krishnan, 41A,Sri Lakshmi Kripa,Kaliannan St,K.K.Pudur,Coimbatore-641038. Mobile : 09500885332 mailto :ramshyam247 AT gmail.com

OBJECTIVE To work in a organization that provides opportunities and challenges that drives my passion.PERSONAL DETAILS Sex : MaleMartial Status : SingleDate of Birth : 28-03-1988Father’s Name : T.R.Krishnan

Religion : HinduNationality : IndianLanguages Known : English, Tamil

Soft Skills- Willing to contribute positively to the organization. - Teaming up with colleagues.

WORK EXPERIENCE Employer : VALVITALIA INDIA PVT.LTDPosition title : Engineer – Quality AssuranceIndustry type : ManufacturingDepartment : Quality AssuranceDuration : 11th May 2009 - till Date

THE CURRENT JOB- Review of customer order specification and preparation of Quality assurance plan to customer.- In Process Inspection of Butterfly valve and Control valve components.- Final Inspection of Butterfly valves, Control valve parts and preparation of Final Documentation.- Coordinating with customers/Third party agencies regarding technical clarifications during witness inspection and assisting for document completion.- Handling Customer Complaints and taking Corrective Actions.- Control of Quality documents and Traceability maintenance of Quality records. - Verifying and acceptance of Material test certificates and reports from suppliers with respect to international standards like ASTM, EN etc.,- Handling project orders.

PROFILE- Good knowledge in ASTM, EN Standards.- Knowledge about valve specifications and strong in product documentation.- Knowledge in Assembly & testing of Butterfly valves and Control valves.- Good Knowledge in quality assurance activities

CAREER ACHIEVEMENTS- Reduced Customer complaints.- Reduced final inspection & documentation lead time.- Improved the Control of Quality documents and Traceability maintenance of Quality records.

IN-HOUSE TRAININGS - In house training on application, selection, sizing, product features, assembly, testing, calibration of different Butterfly valves and Control valves.

EDUCATIONAL BACKROUND

Course Institute Board/Univ Year of Passing Percentage10th Standard Sri Ragavendra Higher Secondary school State board 2003 94.412th Standard Sri Ragavendra Higher Secondary school State Board 2005 92.6B.E -Mechanical EngineeringSri Ramakrishna Engineering College Anna University 2009 73

INDUSTRIAL TRAINING - Visited ACC cement factory- Visited PILLOOR water treatment plant

Quality Engineer ResumeDesired Industry: Automotive/Mechanic SpiderID: 43382Desired Job Location: Opelika, Alabama Date Posted: 9/20/2010Type of Position: Full-Time Permanent Availability Date: 9/20/2010

Desired Wage: 65,000.00

U.S. Work Authorization: Yes

Job Level: Experienced with over 2 years experience Willing to Travel: Yes, 25-50%Highest Degree Attained: Other Willing to Relocate: Undecided

Objective:Proven, dedicated OEM Quality Engineer with 10+ years experience. Successful implementation of ISO TS 16949, ISO 14001and ISO 17025 Quality Management Systems in record times. Statistical Process Controls (SPC). Restructured poorly performing Supplier/Receiving systems gaining the Hyundai 5 Star approval. Reduced Non-conforming product from reaching the production floor and reduced incoming inspection times by 50% after the first 3 month. Introduced Six Sigma Root Cause Analysis methods. AIDT Certified Supervisor.� Certified Lead Auditor for ISO TS 16949 � Project Management� Advanced Product Quality Planning (APQP)� Lean Manufacturing/ Process Improvement � New Product Launches� Control Plans� International Automotive Oversight Board Core Tools (IAOB)� Production Parts Approval Process (PPAP)� Failure Mode and Effects Analysis (FMEA) leader� Managed North American Free Trade Agreement (NAFTA) Rules of Origin� Experienced Supply Auditor� Multi Country Operations Leadership/Global Supplier Sourcing� Bilingual (German/English).� Problem Solving in the Lean Supply Chain � IMDS (International Material Data System) Manager

� International Material Data System (IMDS)

Experience:Matrix Wire Inc. 2009 to 2010Quality Manager

Manage Quality Staff of 7 Quality Inspectors. Reduces major customer PPM from 25000 to 361 in 3 month. Introduced Non Conforming Material System. Communicate on all quality issues with suppliers and customers. Manage all Quality associated issues at Matrix Wire and report �Key Process Indicators to management.

Self Employed 2008 to 2009Quality Management System and IMDS Consultant

Benteler, Opelika, Alabama, OEM 2008 to 2008Quality Systems Engineer

Implementation of ISO TS 16949 and ISO 14001. Creation of a Corporate benchmarking Quality Management System beyond ISO TS 16949 with strong emphasis on Lean Manufacturing and incorporating elements of Toyota principles. Implemented Non-conforming Material Procedure/Traceability. Established Corrective Action Procedure with accent on reducing recurrence.

Samlip Alabama Inc., Alexander City, Alabama, OEM 2007 to 2008Quality Systems Engineer

Maintained Quality Management Systems ISO TS 16949 and 5 Star. Implemented ISO 14001 and 17025 (successful certifications by registrar). Customer Liaison (Chrysler and Hyundai).FMEA Leader. International Material Data System (IMDS). Supplier Quality Supervisor. Developed incoming inspection protocol.

ATS Light Alloy Wheels Alabama Inc., Auburn, Alabama, OEM 2004 to 2007Quality Engineer

Established and implemented ISO TS 16949 and ISO 14001 in 2004. Directed Internal and Customer Audits. FMEA Team Leader. Created APQP program. Project Manager Chrysler wheel programs. Prepared Control Plans. Corrective Action/Root Cause Analysis team leader. Participation in 6S and Lean manufacturing events. Document Control. Established Continual Improvement process. Engineering Standard Control. NAFTA Rules of Origin.

Capitol Specialty Plastics, Auburn, Alabama 1999 to 2004Quality Engineer

Analyzed materials used in the production of manufactured pharmaceutical products using a Gas Chromatograph/Mass Spectrometer and various test equipment. Qualified desiccant material performance to industry standards. Evaluated statistical data. Auditor ISO 9001.

BancTec � Dallas, Texas 1990 to 1999

Computer Field Engineer

Maintained and repaired computer and network systems for contract companies such as Dell, AST, Compaq, IBM, Sony, HP and MetLife. A+ Certified. Serviced and repaired Optical Document Reader System for Banks, AT&T Credit Card Division and AFLAC. Participated in the conversion of older data management system to newer technologies for the FDIC.

Columbus Equipment Company 1985 to 1990Retail Application Program Designer

Education:Education

German Educational System Equivalent to Associates Degree in Business Administration 1998 A+ Certification the equivalent to BS Degree in Computer Science

Affiliations:Member of AQS

Invitation by the Secretariat of ISO/TC 176/SC 2 to evaluate the 2008 revisions of ISO 9001 and ISO TS 16949

Reference:Available upon request.

Candidate Contact Information: JobSpider.com has chosen not to make contact information available on this page.Click "Contact Candidate" to send this candidate a response.

Dennis Johnston

Address:                 250 North State St Big Rapids, MI 49307Phone:                      (231) 796-6848Email:                       [email protected] job:          Automotive Technician at Chrysler

Objective

Pursuing a position in the automotive industry in which I can utilize and build upon my current knowledge of modern automotive manufacturing and engineering.

Strengths

1. Strong logical and analytical skills2. Detail-oriented and striven for perfection3. Outstanding written and verbal skills4. Capability to work in a group environment5. Understanding of essential automotive terms6. Ability to work in a fast-paced environment7. Strong background in mathematics and physics8. Experienced in use of CAD systems9. Extensive background in information technology10. Broad understanding of current automotive terms and systems

Experience

Automotive Quality Engineer, 2008 – PresentGeneral Motors Fairfax Assembly Plant, Kansas City, KS

Responsibilities:

Resolved issues regarding the customer voice navigation unit. Developed timely solutions that minimized overall cost and time to implement. Designed projects never seen before in the automotive industry. Designed projects to improve products already in the automotive industry. Directed a large group of employees engaged in the specialized tasks. Coordinated the supplier quality of products received. Wrote PRR’s and initiated Controller Shipping for suppliers that have progressed

beyond the PRR system. Communicated lessons learned to SMT’s and Validation Teams. Devised tests which answer questions from clients and other engineers on the

development of the product.

Automotive Engineer in Product Innovation, 2006 – 2008Ford Motor Company, Dearborn, Michigan

Responsibilities:

Used my innovation to bring forth different kinds of test procedures. Managed products using problem solving in order to introduce new products to the

market.

Devised and organized tests to answer client and consumer questions involved in the development of the vehicles.

Build individual projects with a larger team, and then worked independently on my specific duty.

Managed all the details of projects, including projected costs. Monitored any related systems or engineering issues associated with the final

project. Attended team meetings regularly to report my progress and any problems I have

found with the project. Supervised the technical staff of engineers and designers.

Automotive Assistant, 2004 – 2006Firestone, Big Rapids, Michigan

Responsibilities:

Performed simple maintenance tasks such as battery checks and replacement of air filters and spark plugs

Assisted lead mechanics in jobs by providing tools and following orders Performed test drives to assess automotive issues Kept shelves properly stocked and work area clean and safe Made sure all tools and diagnostic equipment functioned properly Performed car detailing….. Sustained inventory and maintained records of shop paperwork Answered calls and responded to customer questions and concerns Handled customer transactions when needed

Ruben Clark 172 Luke Lane

Lawton, OK 73501 (111)-618-1432

[email protected]

Job Objective: To be able to work and grow professionally as Automotive Quality Engineer in a stable organization and utilize my experience and expertise in Electric motors, submersible pumps, and HVAC. My advance experience in MCAD techniques and Product Quality Planning will be very helpful in executing my duties effectively.

Skills:

• Experienced in MCAD techniques. • Expert in DFMEA and PFMEA

• Electric motors, submersible pumps, HVAC • Molded rubber & extrusions • Acquainted in Advanced Product Quality Planning • Ability to test mechanical hardware • Skilled in 3D CAD systems6. Expert in MS Office applications

Professional Experience:

Sr. Automotive Quality Engineer, January 2009 – PresentWorld Car, Sun Valley, ID

Responsibilities: • Developed dampers and suspension systems. • Designed new automotive products using MCAD techniques. • Monitored products and plans through Design Verification Plan & Report (DVP&R). • Designed automotive interior trim parts. • Conceptualized new development in electromechanical timing devices.

Jr. Automotive Quality Engineer, March 2006 – December 2008Auto World, Sun Valley, ID

Responsibilities: Trained other engineers in Strategic Systems Development, and Common Sense Quality & Manufacturing. Scrutinized materials used for automotive products to ensure superior quality outcome. Supervised the manufacturing of upholstery including cutting, sewing & assembly. Applied mechanical & electromechanical timing devices performing quality checks. Created designs for engine controls in automotive industry.

Education:

M.S. in Quality Engineering, 2006 University of Florida, Gainesville, FL

B.S. in Automotive Engineering, 2002 University of Florida, Gainesville, FL

Certifications and Affiliations:

• Certificate in Car Mechanic • Association of Automotive Test Engineers

1. Quality assurance engineer resume - Posted by Swati Das

Nagraj [email protected]

OBJECTIVEDesire to be a part of vibrant and leading organization and create footprints as a Quality assurance Engineer, to assist the organizations in all aspects by utilizing all my skills, knowledge, abilities and experience with a balance of hands-on, management and leadership responsibilities

PROFILE SUMMARY -More than three years of experience as a Customer Quality Assurance Engineer in Automotive Electronics industry as a solution oriented and seasoned professional with proven expertise in Planning & Execution of New Projects & Series projects QZ Testing's-Hands-on experience in Performing Reliability Testing's like Endurance, Salt spray and Vibration & Validation of new projects, while setting up individual & team goals also possess capability of managing & retaining of resources, under the management limits and instructions-Delivered quality controls and enhancements to proactively address problems and improved product quality, manufacturing flow, customer satisfaction and bottom-line results-Successfully designed and implemented Universal Break out Box for ECU families and was a part of the team, which successfully relocated ECU manufacturing line from Germany to India and successfully ramp-up plant at RBAI-Possess excellent communications skills and team oriented with proven leadership capabilitieswith proven ability to integrate out of the box thinking & problem solving analysis to improve processes, systems, and methodologies-Exceptional engineering and analytical skills with the ability with a combination of leadership and direction, with motivation, drive, and the capacity to work under vehicle conditions of Lab cars (Gasoline & Diesel) to test the ECUs (Engine Control Units)

SKILLS-Test and Validation -Customer complaint analysis-Believes in Practical involvement of project phases-Excellent communicator with Internal and External Customers-Preparing and Guiding team in preparation Metrics-Excellent analytical and problem solving skills -Ability to work independently as well as a team member-Capable to learn and apply new technologies-Ability to interface effectively with all levels of organization and external customers-Team building and leader ship

-Demonstrate strong Interpersonal and presentation skills-Strong problem solving skills

TECHNICAL SKILLS -LABCAR -CCS Tester -INCA -CAN Analyzer -CAD -CFI -ASCET

KEY RESPONSIBILITIES -Played a major role for setting-up and establishing acomplete analysis Process and Test Lab (start from Scratch) Plant in India, after the training at Germany-GM Analysis (Guarantee Management) for all 0km/Field Failure ECU both Gasoline and Diesel ECUs-Trained, mentored and build a team of 6 members-Successfully resolved failure analysis process and investigation onsite by Interacting with OEMs -Efficiently analyzed BE Products like (Immobilizer, BCM and Remote Key)-Productively planned and performed the Reliability Testing like Endurance, Salt spray, Vibration and Thermal Cycling-Active participation during PHA (Part Handling Analysis at Customer lines, Bajaj & Mahindra etc)-Root cause analysis lead time reduction from 14 days to 07 days-Implemented CFI station (Carpu Flash Interface) - to reduce the lead time for Analysis-Joined as a Team Leader Trainee then Team Leader then Asst. Engineer and Engineer Quality

PROFESSIONAL EXPERIENCE XXXXX ELECTRONICS (I) PVT LTD 2008 - Till DateCustomer Quality Assurance EngineerXXXX is a Germany based OEM components manufacturing and industrial technology provider company for Automobiles.

RESPONSIBILITIES-Responsible for analysis of customer complaints and 8D preparation-Liable for QZ reliability testing and validation -Coordinator for PPAP sample development verification-Warranty Analysis– Customer Complaint Analysis 0 km & Field Return Failures-Expertise in Root Cause Analysis of internal production line failures, 0-KM failures, and Field failures-Liable for 8D Report preparation and interacting with Customers for Corrective and

preventive actions-Write and establish guidelines and standards for CCS Tester, Carpu Flash Interface, Temperature ovens, Lab car Testing Equipments both Diesel and Gasoline systems -Coordinate and Interact with Development & Design team to reduce the Failures due to EOS (Electrical Overstress)-Trained new employees according to standard operating procedures within the test engineering groups-Part Handling Analysis during ECU fitment at Customers Line during new Vehicle Assembly-Debugging of Automotive cards like ECU, Immobilizer and Antenna-Followed procedures for Quality & Reliability testing Processes; including Vibration, Salt spray, Endurance, Thermal shock and Failure Analysis of ASICS-Communicating with vendors for Fixtures, Jigs and Tester Supporting Equipments-corresponding with OEM for any Failures at both 0 km and Field Failures-Worked on Lab cars to test the ECUs (Engine Control Units) at vehicle conditions-Simulations at Customer/Dealer places to understand the exact failure conditions and vehicle failure History-IQIS (Integrated Quality Information System) tracking for new complaints from Customer at different locations across the Globe-Support during Production Part Approval Process for Validation and Testing-Responsible for customer complaint analysis and interacting with Customer to explain the failure analysis details-Liable for Root cause analysis of return parts from customer 0Km/Field-Coordinate and investigate with Customers for repeated failures along with Development Design teams -Coordinate with Project specific software team and Project specific hardware team for analysis-Good knowledge and experience of working with INCA,ASCET, CAN Analyzer software for Failure analysis-Tested the ECU in Drive mode-Interacted with different supplier for failure analysis report for components-Conducted simulation trials along with Design team to reproduce the failure for confirmation on the root cause-Performing Reliability Testing's like Endurance, Saltspray, Vibration, and Validation of New Projects-Responsible for establishment of QZ Lab (Reliability Testing and Validation process Equipments)-Suggested cost savings by implementing Universal Leakage test fixture-Supported Production part Approval Process(PPAP) for new Launch Projects and maintain software validation process-Provided training to the New Associates in Failure analysis Process, Reliability Test Planning, and Execution

ACHIEVEMENTS-Received Best Employee Awards for implemented innovative ideas consistently -One of the most frequently awarded employee in suggestion scheme

QUALIFICATIONS -Bachelor of Engineering from XXXXX of Science & Technology -Diploma in Electronics & Communication Engineering from XXXX

TRAININGS & CERTIFICATIONS -Trained in Customer complaint Analysis Process in Germany for 5 months, 2008-Trained in all the Warranty Analysis Process -Trained in all the Reliability & Quality Testing Process -Trained in “Understanding the CCS Hardware andTest list Generation” from SzP, Germany-Trained in Gasoline System (GS) & Diesel System (DS) vehicle system overview

PERSONAL DETAILS-Date of Birth:-Language Known:-Permanent Address:

2. Quality assurance engineer resume - Posted by Anupriya Niranjan

Srikanth XXXXMobile: 78******Email: srikanth******@gmail.com

CAREER SUMMARY- Around X years of diverse experience in the field of information technology with the emphasis on Quality Assurance, A Methodologies, Business Requirements Analysis ,User Acceptance Testing(UAT),Frontend(UI) Testing, Back End Testing(Database) and Content Management Systems Approach(CMS). - Extensive Experience in Testing Client/Server and Web Based applications (Web Testing),CC/IVR(CTI),Siebel(CRM).Proficient in White Box(Code and Design Reviews), Black Box Testing(Manual , Automation with HP/Mercury Tools(WinRunner,QTP), Backend(DataBase) testing).Proficient in domains like Financial, Banking(Credit Cards),Insurance,Medicaid,Healthcare and shipping. A motivated self-starter with exceptional Analytical, Problem Solving, Communication and Interpersonal skills. Currently working as Senior QA Engineer.

TECHNICAL SKILLS- Operating Systems: Windows95/98/NT/2000/XP, UNIX, Shell Script, MS word, MS Excel, MS Access (MS.Office).- Automated Testing tools: HP/Mercury (Q.T.P 8.2, WinRunner 8.0, and Load Runner 6.0) Javalin stress Tester, QTP, and JUNIT.- Management tools: Test Director 8.0, QualityCenter 8.0, TeamTrack. StarTeam, RationalClearQuest 7.0,DOORS.

- Languages&Protocols: SOAP, TSL Scripts, TCL, Perl, C, C++, Java (OOPS), V.B.Script, XML, WSDL.- Web Servers: Java Web Server 2.0, weblogic, Websphere, IIS/Servlet, ApacheTomcat5.0.- Version Controls: Visual Source Safe, Rational Clear Case 6.0- Database: Oracle7.x/8.0/8i/9i (SQL, PL/SQL), SQL server, SQL Plus AquaDataStudio 4.7/6.0,TOAD.

PERSONAL QUALITIES- Good managerial skills.- Positive attitude towards work.- Flexible with working in any environment.

KEY RESPONSIBILITIES HANDLED- Extensive experience in Business Analysis of the Functional Requirements of the application, development of functional specifications, project planning and Scrum Methodology.- Involved in Code and Design Reviews and did Unit and Integration testing as part of White Box testing. Involved effectively in the Software development life cycle (SDLC) right from development through Various Testing phases. Involved in the preparation of TRM (Test Responsibility Matrix) which is defined as mapping between Development stages and Test factors as part of Business Analysis (BA).- Involved in the development of RTM (Requirements Traceability Matrix) for completeness and correctness.- As Part of Content Management System, got the latest Business Requirement Docs from DOORS from the developers.- As Part of Content Management System, worked to avoid duplicity of work and improvement for Communication between fellow QA Engineers- As Part of Content Management System, got the latest Business Requirement Docs from Central Database from the developers.- Filing of Defects in to Star Team as per the Guidelines followed as part of the Content Management Systems to avoid redundancy and better and speed movement.- Review Requirements and Use cases in DOORS.- Experience of Change Management, Incident Management, Problem Management etc.- Involved in various Testing phases like Test Policy, Test Methodologes, and Test Strategies etc.- Execute and wrote test documentation for Test Plan, Test Design and Test Strategy, Test Cases.- Wrote Test Cases based on Boundary value Analysis (BVA), Equivalence Class Partition (ECP).- Designed Planned Created and Executed Test Cases and made Test Case Selection Review.- Regression, Smoke, Sanity Testing.- Experience in different Testing methodologies like Functional testing, Regression testing, Unit, Integration testing, Exploratory Testing, GUI testing, System Testing,Interface,User Acceptance testing(UAT),Installation, Compatibility and Load testing.- Excellent Analytical & Problem Solving Skills, Written and verbal communication skills.- Involved in the Requirements Meetings, Review Meetings continuously with developers

and users and modifying the Test Cases accordingly to test the new features developed in the application as per the user requirements as part of User Acceptance Testing(UAT).- Analyzing the Low Level Design (LLD’s) and High Level Design (HLD’s) documents as part of UAT.- Web Testing like Sitemap Testing, Static Text Testing Using Automation Tools as well as manually using I.E, NetScape Navigator.- After completion of Final Regression cycles, concentrated on User Accepting testing (UAT) to correct feedback in two types of approaches such as Alpha Testing and Beta Testing.- Involved in the meetings continuously with users and modifying the test cases accordingly to test the new features developed in the application as per the user requirements as part of UAT.- Involved in the preparation of Documents like Test Plan, Test Strategy, TestMethodology, Test Harness and Bug Reporting.- Extensively checked tags in the log files and the flow of the FIX (Financial Information Exchange) messages.- Effectively tested Siebel (CRM) Applications, as part of Call Center Application.- Experience in centralized database testing from which the data is flown to the CC/IVR (Siebel system CRM), CTI (Computer Telephony Integration).- Prepared a UI (Frontend), Functional, Final Regression Testing Plan and tested.- Developed UI (Frontend) test cases as part of Regression Testing including Microsoft 6 rules like Color, Font, Size, Shape etc.- Developed Scripts in Win runner (TSL), Q.T.P for doing Retesting purposes using Data Driven Testing using excel Sheets.- Used various concepts like Check points, Synchronization Point, Batch testing Concepts in Winrunner, Q.T.P.- Used the concept of Compiled Module in WinRunner and Re-Usable functions in Q.T.P Framework.- Used TestDirector, Clear Quest, and Quality Center very effectively for reporting the defects and updating the status of Defects and for estimation of the Test status.- scripts(Procedures,Functions,Views,Aliases) for effective Data validation and Data Integration purposes during Backend Testing DDL,DML,TCL,DQL like SQL concepts.- Used Join Concepts (Outer join, Equi Join etc) in SQL for joining and retrieving data from two tables.

KEY PROJECT UNDERTAKEN1. Project: XXXXDuration: Nov 20XX to CurrentDesignation: Sr.QA Engineer and UAT Tester.

Description:XXXX – Professional Certification Testing Organization system – is a suite of applications that enable XXXX to develop, administers and delivers certification exams on behalf of the securities industry. In addition to serving the securities industry, FINRA also facilitates certification testing for several non-securities industry organizations. Through the use of PROCTOR, XXXX is able to provide full administration of exams including authoring/content management, enrollment control, appointment scheduling, exam

distribution and delivery, result processing, and reporting.The Authoring application, within XXXX provides users the ability to manage exam content also known as a Program. In addition, it provides users the ability to view the statistics collected from administered exams and use the data to evaluate and revise each exam. The Authoring application uses a number of panels and graphic icons, buttons, and options to allow users to easily navigate within the various aspects of a Program.Various Components of Proctor Application1)Proctor 2)Authoring 3)Program 4)Outline 5)Items 6)Specifications 7)Presentation Items and Surveys 8)Preparing an Import File 9)Reports 10)Item Statistics 11)PROCTOR Verification ChecksEnvironment: Manual Testing, HP/Mercury Q.T.P 8.2,WinRunner 8.0,LoadRunner 8.0, Scrum Methodology, C++, VbScript, VB 6.0, Crystal Reports 6.0, DOORS 8.0, SQL,TOAD, Solaris UNIX, AquaDataStudio 4.7/6.0, Oracle 9i/10g, Java, J2EE, Ajax, WebServices, VB, BEA Weblogic 7.x/8.1.6, Web Services,XML,WSDL(Webservices Development Language),SOAP Eclipse SDK 3.3, IE 6.0, Firefox 2.0, StarTeam 2005, QualityCenter 9.2,BPT. Ms-Office, Ms-Project, Scrum&Agile.

2. Project: XXXXX Duration: Apr 20XX to Oct 20XX Designation: Sr.QA Engineer & UAT Tester. Description:The XXXX project is a State of Washington ProviderOne Project.It deals with Medicaid Management, Claims processing and Insurance services provided by Washington State to the people. There are providers who submit the bills to state for costs incurred for a client and get paid by the state. CAMS are the centralized database from which the data is flown to the CC/IVR (Siebel system CRM) depending on the query fired to ECAMS through a Web Service Requests. The CC/IVR is the Call Center application used by the Customer Service Representative when a caller calls through the IVR (Interactive Voice Response) to get the details of a claim viewed and thus to notify the caller about the status of claims.Managed day to day call center environment consisting of 1000 registered clients.Responsible for all modifications to existing voice or data communications conversion from hardware dialer system. Worked with IVR platform to reconfigure the voice response system to improve customer satisfaction. The project contains different modules like:1)Clients 2)Providers 3)Claims Inquiry 4)Alerts 5)Service Requests 6)Status 7)Provider One(ECAMS) Environment: Manual Testing, HP/Mercury QTP, WinRunner, Quality Center 9.0, Scrum Methodology,HTML,Java,JavaScripts,Webservices,XML,WSDL,SOAP,.Net,VB Script, Perl, FTP, MS Office, Windows NT/2000,SQL,PL/SQL,DOORS.

ACHIEVEMENT:- Stayed under budget for many quarters.

EMPLOYES1 Company Name: XXXX IT solution and services Pvt.Ltd.

Duration: Since OCT 20XX Designation: Sr.QA Engineer & UAT Tester

2 XXXXDuration: From June 20XX to September 20XXDesignation: QA Engineer & UAT Tester

ACADEMIA-B.Tech(Computer Science Engineering) from University 1 with aggregate of 76% in 20XX.

PERSONAL DETAILSDate of Birth: 11th January 19XXLanguages Known: English, Hindi, and Tamil & Malayalam

3. Quality assurance engineer resume - Posted by Rahul Bhardwaj

VIKAS MALIK

Mobile No-098XXXXXXXXEmail : [email protected]

OBJECTIVE:

To commit myself for the responsibility given in the company or organization and fulfill it with my skills Of creativity and enthusiasm of working, where my endeavor will be appreciated with equal reciprocation.

SYNOPSIS OF SKILLS:

-Confident personage.-Leadership quality.-Honest and reliable.-Can communicate with any person at any level.-Good grasping power of any new and challenging sector.

ACADEMIC QULIFICATION:

-10th from XXXXXX SCHOOL EDUCATION BORD in 2002.-10+2 from XXXXXX SCHOOL EDUCATION BORD in 2004.

PROFFESIONAL QUALIFICATION:

-Three year diploma in Mechanical from XXXXXX Polytechnic, XXXX.-Packages known’s-MS-Word 97/2000, MS Excel 97/2000, MS Power Point 97/2000.-AutoCAD-Had undergone a special practical training on CNC machines and their tooling which also included Tool Room on machine training. All the machinery processes are done by me practically for a period of 6 months.-Sound knowledge of Jigs and fixtures Development.-Special training on Advanced Welding processes.

EMPLOYMENT HISTORY:

1. I worked with XXXXX Engineers Ltd.as a Development Engg. -It also has many industries under its umbrella to which I am providing services. -It also has three other units in Ludhiana.

I joined the company as mention follow:

-Period: April 1,2007 to 30 th April, 2009-Designation: Engineer. -Vendor Development Reporting to: HOD Of development.

COMPANY PROFILE:

-An ISO 9001-2000 TS company and a very renowned suppliers of XXXXX CORP Deals with the manufacturing of auto components and sheet metal accessories exclusively for XXXXX CORP and their related concerns, along with XXXX and XXXXX engg.-An ISO/TS 16949; 2002 company and manufacturer of machined & sheet metal components for, HERO MOTO CORP, TVS, KE, MAL, ITL, TALBROS, SONALIKA, HONDA, EXPORT.-Manufacturer & supplier of automotive component, machining and tractor part.

2. Worked with XXXXXXX Industries Limited as Precision Engineer.

I joined the company as mention follow:

-Period: August 10th ,2009 to 31 th March, 2011-Designation: Precision Engineer. -Reporting to: GM of Quality Assurance.

3. Currently working with XXXXX Industries Limited as Quality Assurance Manager and MR from 1st April,2011 to till date.

JOB RESPONSIBILITIES:

-Development & Procurement of parts in various technology i.e. Sheet Metal, Casting, Forged components, Machining parts etc.-Procurement and purchase Automobile parts, Tractor linkage parts with regular follow up and supplier visiting-Costing of new product of sheet metal, forging, machining and casting products-Providing Technical support to suppliers.-Vendor Development with specific knowledge of costing /Negotiation background in Automotive proprietary parts-Part development as per APQP process & Project timelines.-Vendor analysis & rationalization for capacity assessment, time frame agreement & technology tie ups.-Variance analysis at each stage of development in terms of Quality, Cost & Delivery & corrective action. -Effective co-ordination with the Design team to ensure first time right & end delivery of product-Technical analysis of raw materials like: structure, grains, chemical composition, mechanical properties and H/T process of material-Cost Reduction of existing components by VALUE ENGINEERING and VALUEA NALYSIS-Cost saving in new as well as existing components.-Alternate Sourcing for smooth supply chain and better quality-Price Increase/decrease settlement with supplier based on raw material fluctuation-Costing of new product of sheet metal, forging, machining and casting products

ON-JOB TRAINING:

-Undergone training on implementation of 5S.-Under gone training on FMEA.-Under gone training on ERP.-Under gone training on Lean Manufacturing Techniques

ACHIEVEMENTS:

-Introduced and implement gauges to reduce rejection, inspection time and manual errors of inspections.-Improve the effectiveness of inspection by the use of gauges.

PERSONAL INFORMATION:

-Date of Birth : -Marital Status : -Strength : Self confident, willing to accept challenges.

SQA (Ingeniero en calidad) Ramo Automotriz - El Marques, Querétero

Nombre del puesto:   SQA (Ingeniero en calidad) Ramo AutomotrizEmpresa:   confidencialPaises:   MéxicoProvincia:   Queretaro de ArteagaCiudad/Localidad/Barrio:    El Marques, QueréteroÁrea del puesto:   Sistemas, IT, MIS, Teleco.Número de Oferta:   1987391Cantidad de Postulaciones Recibidas:   14

Anuncios GoogleTest InstrumentsLarge Selection of Stocked Instruments at Great Prices.www.dwyer-inst.com/testinstruments

Ingeniero Industrial Mecánica o carrera a fin

Tener curriculum experiencia automotriz.

Experiencia En Atención Al Cliente.

Solución De Problemas.

Disponibilidad De Viajar A La Hora Que Sea.

Office(Excel, Word, Outlook, Power Point).

Manejo de QS-STAT/MINITAB.

Manejo del Sistema BPS.

Conocimiento y aplicación de AMEF.

Inglés avanzado (Capaz de sostener una conversación de negocios)

Experiencia mínima de 2 años en el ramo automotriz

Conocimiento sobre Lean Manufacturing.

Conocimiento y aplicación de Herramientas de Estadística

Conocimiento y aplicación de MSA

Conocimiento de requerimientos específicos de cliente

Negociación y Comunicación efectiva

Conocimiento del producto y proceso

Normas de Sistema de Calidad ISO 14001/ISOTS16949

Conocimiento y aplicación de PPAP

Conocimiento sobre APQP/ Plan de control.

Técnicas para la solución de problemas (G8D/PMP), SHAININ

Conocimiento de GD&T.