Metcal SSC Tip Cartridges forOKi MFR-H6-SSC Hand-piece
.40"
.21"5.3mm
10mm
.30"
.13"
7.6mm
3.3mm
.65"
.12"
3.0mm16.5mm
CHISEL SOLDERING TIP CARTRIDGES
The new MFR-H6-SSC Hand-piece is compatible with the MetcalSSC
Tip Cartridge range and the OKi MFR-1100 Single Output andMFR-2200
Dual Output Soldering and Rework Systems.
7 = 700 Series for most standard applications. 6 = 600 series
and 5 = 500 series also availablefor temperature sensitive
applications. To order these series, replace 7 with either 6 or
5.
.63".07"
1.78mm
16mm
.65"
.07"
1.78mm
16.5mm
.40".07"
9.9mm
1.78mm
.40"
1.5mm
10mm.06"
.43"
1.0mm
.04" 11mm SSC-742ALong Reach Chisel 60º1.78mm
(.07̎)SSC-736AChisel 30º2.5mm (.10̎)
SSC-746ALong Reach Chisel3.0mm (.12̎)
SSC-713AChisel 90º3.3mm (.13̎)
SSC-717AExtra Large Chisel5.3mm (.21̎)
SSC-725AChisel 30º1.0mm (.04̎)
SSC-771AConical Chisel1.0mm (.04̎)
SSC-738AChisel 30º1.5mm (.06̎)SSC-737AChisel 30º1.78mm
(.07̎)
SSC-772AConical Chisel1.78mm (.07̎)
SSC-770ALong Chisel1.78mm (.07̎)
.39"
.10"
9.9mm
2.5mm
.39".07" 9.9mm
1.78mm
.36".04"
1.0mm
9.1mm
.45"
.02"
0.51mm
11.4mm
.07"
14.2mm
60°
1.78mm.56"
.75".016"
0.4mm
19mm
.70".05" 17.8mm
1.27mm
.64"
45º
.02"
.18"
16.25mm
0.5mm
4.5mm
15mm
.055"
.590"1.4mm
.04".60"
1.0mm
15.2mm
.70".016" 17.8mm
2.3mm
.64"
45º
.02"
.18"
16.25mm
0.5mm
4.5mm.24"6.1mm
.52"13.2mm
.01".25mm
30°
.60"15.24mm
.02"
.51mm
60°
.45"11.43mm
.035".89mm
30°
0.65"16.51mm
.03"
.76mm
60°
.65"16.51mm
.045"1.14mm
SSC-747ABevel 60º1.78mm (.07̎)
SSC-767ADrag Soldering Tip(Mini-Hoof), 1.27mm
SSC-739ADrag Soldering Tip(Hoof), 2.3mmSSC-761ADrag Soldering
Tip(Knife), 4,5 mm
SSC-773ADrag Soldering Tip, 4.5mm .Increased Tinned Area
6.1mm
OTHER SOLDERING TIP CARTRIDGES for longer reach touch up
applications
SSC-790AConical Sharp0.25mm (.01̎)
SSC-7172ADrag Soldering0.51mm (.02̎)
SSC-7175AMicro Drag Soldering0.89mm (.035̎)
SSC-7171A*0.76mm (.03̎)
SSC-7174ALong Reach MicroDrag Soldering1.14mm (.045̎)
MICRO FINE REWORK TIP CARTRIDGES
www.okinternational.com
7 = 700 Series for most standard applications. 6 = 600 series
and 5 = 500 series also available for temperature sensitive
applications. To order these series,replace 7 with either 6 or
5.
7 = 700 Series for most standard applications. 6 = 600 series
and 5 = 500 series also available for temperature sensitive
applications. To order these series, replace 7 witheither 6 or
5.
The new MFR-H6-SSCHand-piece is compatiblewith both OKi
MFR-2200and MFR-1100 SeriesSoldering and ReworkSystems.
.45"
0.51mm
.02" 11.4mm
.73"
.02".51mm
18.5mm
SSC-722AConical Sharp0.51mm (.02̎)
SSC-754AConical Sharp, Bent 30º0.51mm (.02̎)
SSC-726AConical Sharp, Bent 30º0.51mm (.02̎)
SSC-701AConical Sharp1.0mm (.04̎)
SSC-774AConical Sharp1.4mm (.055̎)
SSC-745AConical Sharp0.4mm (.016̎)
*Use to remove 0201 and 0402 components from a "topside"angle.
This design incrases microscope viewing whenreworking/removing
micro chip capacitors/components.
tfrankenbergerHervorheben
tfrankenbergerHervorheben