Marine Consulting & Inspectionmarqua.se/wp-content/uploads/2016/04/Marqua... · Document: IMCA M 189 Rev. 2 IMCA-MISW Marine Inspection for Small Workboats Document: IMCA M 149 Issue

Marine Consulting& Inspection

When Quality Comes First!

April 2016

BusinessIdea

To assist and provide customers with highquality services, demanded by the industry.

To carry out services with focus on safetyand quality.

To assist customers with planning,execution and completion of projects.

To assist customers with long termsolutions and implementation.

To assist customers whenever andwherever support is needed.

To offer customers world wide service24/7, 365 days a year.

Services

We are flexible and focused on your demands, andable to assist anywhere in the world, wherever theassistance is needed.

Examples of services we offer:

• IMCA-CMID Audits for Small Workboats• IMCA-CMID Audits for SOLAS Vessels• Marine Warranty Surveying• HSE Representative within Offshore Industry• Vessel Suitability Surveys• External loading master (Oil/Chemical)• Pre- Purchase & Pre- Hire Inspections• Pre-OVID Inspections• Internal Audits• Cargo inspections and cargo claims• Incident investigations and Root Cause

analysis (RCA)• Project partner during new building , ship

conversion or just a routine yard stay.

IMCAInspections

From September 2015 we have had thepossibility to offer IMCA CMID vesselinspections carried out by an AccreditedVessel Inspector (AVI).

This is also applicable for the IMCA MISWvessel inspection for small workboats.

The inspections are based on the followingIMCA documents:

IMCA-CMIDVessel Inspection General vessels and DPvessels

Document: IMCA M 189 Rev. 2

IMCA-MISWMarine Inspection for Small Workboats

Document: IMCA M 149 Issue 9

Experience

We have experience from the followingsectors of the maritime industry:

• Oil tankers• Chemical tankers• Seismic Streamer Vessels• Seismic Node Vessels• Platform Supply Vessels (PSV)• Well Stimulation• ROV Trenching• Subsea Construction on deep water• Vessel conversions• Small Work Boats• HSE Advisor in Offshore Industry

Clients

QualityPolicy

PurposeMarqua AB shall deliver services that meet customerrequirements and expectations with the ambition to establishlong-term relationships.

StrategyIn order to establish Marqua AB as a highly reputed providerof services amongst employees, customers and other stake-holders, the company shall:

• Through continuous communication with customers ensurethat their need is understood and adjust the contents andextent of our support thereafter;

• Provide customers with professional advice and assistance;• Deliver services in accordance with national and

international rules, regulations and industry standards;• Ensure that employees possess the skills required for their

assignment and realise that every achievement is importantfor the total quality;

• Ensure that employees continuously develop their skillswithin the company’s business areas;

• Deliver services in an efficient and timely manner;• Establish measureable quality goals and follow-up

continuously and revise if needed;• By continuous improvement adjust our operations in order

to increase customer’s satisfaction.

EnviroPolicy

Marqua AB believes that businesses are responsible forachieving good environmental practice and operating in asustainable manner.

We are therefore committed to reducing our environmentalimpact and continually improving our environmentalperformance as an integral and fundamental part of ourbusiness strategy and operating methods.

Our policy is to:

• Wholly support and comply with or exceed therequirements of current environmental legislation and codesof practice;

• Minimise our waste and then reuse or recycle as much of itas possible;

• Minimise energy usage in our vehicles and processes inorder to conserve supplies, and minimise our consumptionof natural resources;

• Operate and maintain company vehicles with due regard toenvironmental issues as far as reasonably practical;

• As far as possible purchase products and services that dothe least damage to the environment;

• Assess the environmental impact of any new processes orproducts we intend to introduce in advance.

H&SPolicy

Marqua AB’s primary Health and Safety objectives are:

• Integration of Health & Safety aspects in all Marqua AB’sbusiness decisions;

• Prevention of occupational incidents;• Safeguards against all operational risks;• Compliance with relevant international/national/local

Health & Safety regulations, legislations, guidelines andindustry best practices.

Marqua AB shall achieve the above defined Health & Safetyobjectives by:

• Proactively managing operational risks connected to thebusiness area;

• Emphasizing that working safely is a condition ofemployment;

• Accepting individual responsibility and accountability forHealth & Safety fulfilment;

• Actively participate in any customer’s Health & Safetyprogram during the complete duration of a project, such asSafety Observation Program;

• Regularly reviewing all mandatory rules, regulations,industry codes and guidelines that are relevant to thebusiness area;

• Maintaining high standards for safety awareness andpersonal discipline;

• Ensuring that minimum PPE is used at all times, and adhereto any customer specific requirements during the completeduration of a project. Minimum PPE includes hard hat,safety shoes, safety glasses, reflective workwear and gloves(work dependent).

About

Founder:

Johan RindmyrManaging DirectorPhone: +46 70 444 60 00E-mail: [email protected]

Company:

Marqua ABHasselö593 91 VästervikSwedenPhone: +46 70 444 60 00E-mail: [email protected]