Surface Oriented Diving System Modular
IMCA compliant
IMCA compliant surface oriented diving system built to IMCA D
018 and audited to IMCA D 023 guidelines
Kreuz Subsea is a contractor member of International Maritime
Contractors Association (IMCA) and operates in accordance with IMCA
guidelines and codes of practice for offshore diving
operations.
Kreuz Subsea has the in-house competency to maintain the systems
and proven track record of performing projects with modular diving
systems. Capability profile extends to 100 subsea construction
projects, 20 clients, 40 different vessels and 10 countries.
IMCA COMPLIANT SURFACE ORIENTED DIVING SYSTEM
20 ft dive control 1 unit 6000 x 2440 x 2440 mm and deck
decompression 10 mt chamber
20 ft dive store/ 1 unit 6000 x 2440 x 2440 mm workshop
container 10 mt
LARS with hydraulic 2 units 4600 x 2400 x 2400 mm power pack 4.5
mt each
LP compressor 1 unit 2000 x 1200 mm
HP compressor 1 unit 1400 x 1200 mm
Hydraulic power pack, 1 unit 1200 x 1000 mm umbilical, tools
Electrical distribution 1 unit board
Interconnecting hoses 1 lot and TESCOM regulators to hook up gas
quads
Kirby Morgan diving 1 lot helmets and band masks
AUXILIARY SUPPORT EQUIPMENT (OPTIONAL)
Diesel generator 1 unit 3650 x 1300 x 1740 mm (440 V, 220 kVA)
3.7 mt
Air compressor: 1 unit 3800 x 1950 x 1750 mm Industrial (390
CFM) 2.5 mt
Medical O2 quads 4 units 1500 x 1500 x 2000 mm
(16 bottles) 2 mt each
Diving air quad 1 unit 12100 x 1900 x 2000 mm (64 bottles) 7
mt
Underwater broco 1 unit 1500 x 1500 mm cutting umbilical
Volume tank for 1 unit 1000 x 1000 mm compressor
Dive ladder 1 unit 8000 x 1200 mm
IMCA Compliant Surface Oriented Diving Specification | Kreuz
Subsea Pte Ltd© Kreuz Subsea Pte. Ltd. The information contained
herein is provided for general information and illustrative
purposes only and is not intended or to be construed as a warranty,
an offer, or any representation of contractual or other legal
responsibility. Kreuz Subsea Pte Ltd reserves the right to change
information without notice.