-
EINBAU- UND MONTAGEANLEITUNGKESSEL-Badablauf „DER
ULTRAFLACHE“Auslauf seitlich DN 40 / DN 50 / DN 70
Mit KESSEL-typischen Vorteilen
• Niedrigste Einbauhöhe• Drehbares und um 50 mm stufenlos
höhenverstellbares Aufsatzstück• Optimale Rohrreinigung durch
Herausnehmen
des Geruchverschlusses• Einfacher Einbau• kombinierbar mit
KESSEL-Designrosten und
Lock & Lift System 125 (Verriegelung)
Abb. zeigt Art.-Nr. 45 700.63
Änderungsstand: 04/2010-HGSachnummer: 362-915A
Dehnfuge zwischen Endbelag undAufsatzstück legen.
-
Produktbeschreibung
� Aufsatzstück drehbar, stufenlos höhen-verstellbar um 50 mm.
Auf Bodenniveauanpassbar, minimale Einbauhöhe durchAbsägen
� Herausnehmbarer Geruchverschluss� Grundkörper� Ausbaufähig und
kombinierbar mit
Ergänzungsbauteilen (siehe Rückseite)
�
�
Art.-Nr. 45 740
Art.-Nr. 45 700�
GrundkörperDN 50
GrundkörperDN 70
GrundkörperDN 40
Art.-Nr. 45 770
Art.-Nr. 45 700.71
Art.-Nr. 45 701
GrundkörperDN 50
mit seitl. ZulaufDN 40
-
EinbauvorschlagEinbauvorschlag
� KESSEL-Grundkörper„Der Ultraflache“
� Geruchverschluss� Aufsatzstück� Rost mit Schlitz-Design�
Rollring
Abb. zeigt Art.-Nr. 45770 + 48201
� KESSEL-Grundkörper„Der Ultraflache“
� Multistop� Aufsatzstück� Standard-Schlitzrost� Rollring
� KESSEL-Grundkörper„Der Ultraflache“
� Geruchverschluss� Aufsatzstück� Standard Schlitzrost
Abb. zeigt Art.-Nr. 45740.20
Abb. zeigt Art.-Nr. 45700.71
� � �
-
Einbau- und Montagetips
Bei Inbetriebnahme ist darauf zu achten, daß der Geruchverschluß
vollständig mit Wassergefüllt ist. Bitte kontrollieren Sie den
Wasserstand in regelmäßigen Abständen, um eineGeruchsbelästigung zu
vermeiden! Sollte ein regelmäßiger Wassernachfluß nicht
möglichsein, dann kann alternativ die wasserlose Geruchssperre
KESSEL-Multistop (Art.-Nr. 48500)nachgerüstet werden. Achtung: bei
Nachrüstung muss der Zentrierzapfen am Grundkörperentfernt
werden!Achtung! Betriftt Ultraflach DN 40: die mitgelieferte
Lippendichtung beim Aufsatzstück findetkeine Anwendung.
Nach Abnehmen des Rostes und Herausnehmen des Geruchverschlusses
ist eine optimaleRohrreinigung möglich.Bei Wiedereinbau den
Geruchverschluß vollständig mit Wasser füllen.
Aufsatzstück drehbar,stufenlos höhenverstellbar
Flexibler Niveauausgleichzwischen Aufsatzstückund
Grundkörper
Minimale Einbauhöhedurch Absägendes Aufsatzstückes
Reinigung
-
Gewährleistung1. Ist eine Lieferung oder Leistung mangelhaft, so
hat KESSEL nach Ihrer Wahl den Mangel
durch Nachbesserung zu beseitigen oder eine mangelfreie Sache zu
liefern. Schlägt dieNachbesserung zweimal fehl oder ist sie
wirtschaftlich nicht vertretbar, so hat derKäufer/Auftraggeber das
Recht, vom Vertrag zurückzutreten oder seine Zahlungspflicht
ent-sprechend zu mindern. Die Feststellung von offensichtlichen
Mängeln muss unverzüglich,bei nicht erkennbaren oder verdeckten
Mängeln unverzüglich nach ihrer Erkennbarkeitschriftlich mitgeteilt
werden. Für Nachbesserungen und Nachlieferungen haftet KESSEL
ingleichem Umfang wie für den ursprünglichen Vertragsgegenstand.
Für Neulieferungenbeginnt die Gewährleistungsfrist neu zu laufen,
jedoch nur im Umfang der Neulieferung.Es wird nur für neu
hergestellte Sachen eine Gewährleistung übernommen.Die
Gewährleistungsfrist beträgt 24 Monate ab Auslieferung an unseren
Vertragspartner.§§ 377.378 HGB finden weiterhin Anwendung.
Über die gesetzliche Regelung hinaus erhöht die KESSEL AG die
Gewährleistungsfrist fürLeichtflüssigkeitsabscheider,
Fettabscheider, Schächte, Kleinkläranlagen und
Regen-wasserzisternen auf 20 Jahre bezüglich Behälter. Dies bezieht
sich auf die Dichtheit,Gebrauchstauglichkeit und statische
Sicherheit.
Voraussetzung hierfür ist eine fachmännische Montage sowie ein
bestimmungsgemäßerBetrieb entsprechend den aktuell gültigen Einbau-
und Bedienungsanleitungen und den gül-tigen Normen.
2. KESSEL stellt ausdrücklich klar, dass Verschleiß kein Mangel
ist. Gleiches gilt für Fehler, dieaufgrund mangelhafter Wartung
auftreten.Stand 10.11.2009
-
Systemzubehör
� Grundkörper aus ABS (siehe 2. Seite)DN 40 45740DN 50 45700DN
70 45770DN 50 mit seitl. Zulauf 45701
� LINEARIS Super60*750 mm 48908850 mm 48909950 mm 48910
1150 mm 48912� LINEARIS System 125*
(lieferbar Ende 2009)750 mm 46908850 mm 46909950 mm 46910
1150 mm 46912� Verlängerungsstück aus ABS*
ohne seitlichem Zulauf 48987mit seitlichem Zulauf DN 50
48989
� Multistop 48500
Geruchs- und Ungeziefersperre (bei 45740 er-höht sich die
minimale Aufbauhöhe auf 77 mm)
� Variofix-Dünnbettaufsatz* 48963mit Schlitzrost 150 x 150
mm
� Pressdichtungsflansch 48402aus Edelstahl*
Aufsatzstück 48201mit Schlitz-Design-Rost, 120 x 120 mm
Aufsatzstück 48202mit Oval-Design-Rost, 120 x 120 mm
� Aufsatzstück aus ABS 48193mit Schlitzrost, 150 x 150 mm aus
ABS
� Aufsatzstück aus ABS 48950mit Schlitzrost, 150 x 150 mm aus
Edelstahl,verschraubt
Klebeflansch mit Gegenflansch 48410passend für Artikel 45700,
45770, 45701
* nicht für Artikel 45740 / 45740.20 geeignet!
Darstellung des kompletten Baukastensystems.
�
�
� ��
�
� �
-
INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE
KESSEL-bathroom drain “ULTRAFLAT“side outlet DN 40 / DN 50 / DN
70
With typical KESSEL advantages
• Low installation height• Attachment piece can be turned and
conti-
nuously height-adjusted by up to 50 mm• Optimum pipe cleaning by
removal of
odour trap• Simple installation• Can be combined with KESSEL
design
covers and Lock & Lift system 125Picture shows Art.#. 45
700.63
Edition: 04/2010-HGNumber: 362-915A
Place expansion joint between end cover andattachment
piece..
-
Product description
� Attachment piece can be turned and conti-nuously
height-adjusted by up to 50 mm.Can be adapted to floor level,
minimuminstallation height through sawing to size
� Removable odour trap� Drain body� Can be extended and combined
with supple-
mentary components (see reverse)
�
�
Art.# 45 740
Art.# 45 700�
Drain bodyDN 50
Drain bodyDN 70
Drain bodyDN 40
Art.# 45 770
Art.# 45 700.71
Art.# 45 701
Drain bodyDN 50
with side inletDN 40
-
EinbauvorschlagInstallation suggestions
� KESSEL-Drain body„Ultraflat”
� Odour trap� Attachment piece� Cover with slot-design�
Supporting ring
Picture shows Art.# 45770 + 48201
� KESSEL-Drain body„Ultraflat”
� Multistop� Attachment piece� Cover with slot-design�
Supporting ring
� KESSEL-Drain body„Ultraflat”
� Odour trap� Attachment piece� Cover with slot-design
Picture shows Art.# 45740.20
Picture shows Art.# 45700.71
� � �
Elastic joint
Gradient
1.5 cm tiles glued in place
Cement floor
Concrete ceiling
PE sheet
Tile adhesive
Concrete ceiling
Concrete ceiling
Cement floor
Cement floor
1.5 cm tiles glued in place
1.5 cm tiles glued in place
Tile adhesive
Tile adhesive
Gradient
GradientGradient
GradientGradient
Elastic joint
Elastic joint
PE sheet
PE sheet
-
Assembly tips
During initial operation, make sure that the odour trap is
completely filled with water. Pleasecheck the water level at
regular intervals to avoid odour pollution! If regular water
replenish-ment should not be possible, the water-less odour stop
KESSEL Multistop (art. no. 48500) canbe retrofitted instead.
Caution: when retrofitting is carried out, the centring pin on the
drainbody must be removed!Caution!Concerns Ultraflat DN 40: the lip
seal delivered with the attachment piece is not used.
Optimal pipe cleaning is possible by taking the cover off and
removing the odour trap by tilting.When the odour trap is replaced,
it must be completely filled with water.
Attachment piece can beturned and
continuouslyheight-adjusted
Flexible level adjustmentbetween attachment pieceand drain
body
Minimum installation heightby sawing the attachmentpiece as
required
Cleaning
-
Guarantee1. In the case that a KESSEL product is defective,
KESSEL has the option of repairing or repla-
cing the product. If the product remains defective after the
second attempt to repair or repla-ce the product or it is
economically unfeasible to repair or replace the product, the
customerhas the right to cancel the order / contract or reduce
payment accordingly. KESSEL must benotified immediately in writing
of defects in a product. In the case that the defect is not
visi-ble or difficult to detect, KESSEL must be notified
immediately in writing of the defect assoon as it is discovered. If
the product is repaired or replaced, the newly repaired or
repla-ced product shall receive a new warranty identical to that
which the original (defective) pro-duct was granted. The term
defective product refers only to the product or part needingrepair
or replacement and not necessarily to the entire product or unit.
KESSEL products arewarranted for a period of 24 month. This
warranty period begins on the day the product isshipped form KESSEL
to its customer. The warranty only applies to newly
manufacturedproducts. Additional information can be found in
section 377 and 378 of the HGB.In addition to the standard
warranty, KESSEL offers an additional 20 year warranty on
thepolymer bodies of class I / II fuel separators, grease
separators, inspection chambers, waste-water treatment systems and
rainwater storage tanks. This additional warranty applies tothe
watertightness, usability and structural soundness of the product.A
requirement of this additional warranty is that the product is
properly installed and opera-ted in accordance with the valid
installation and user's manual as well as the correspondingnorms /
regulations.
2. Wear and tear on a product will not be considered a defect.
Problems with products resul-ting from improper installation,
handling or maintenance will also be considered a defect.
-
System accessories
� Drain body made of ABS (see page 2)DN 40 45740DN 50 45700DN 70
45770DN 50 with side inlet 45701
� LINEARIS Super60*750 mm 48908850 mm 48909950 mm 48910
1150 mm 48912� LINEARIS System 125*
750 mm 46908850 mm 46909950 mm 46910
1150 mm 46912� Verlängerungsstück aus ABS*
ohne seitlichem Zulauf 48987mit seitlichem Zulauf DN 50
48989
� Multistop 48500odour and rodent stop (with 45740 the mini-
mum installation height is increased to 77 mm)� Variofix-shallow
bed attachment* 48963
with slotted cover 150 x 150 mm� Pressure sealing flange
48402
made of stainless steel* Attachment piece 48201
with slotted design cover, 120 x 120 mm
Attachment piece 48202
with oval design cover, 120 x 120 mm� Attachment piece ABS
48193
with slotted cover, 150 x 150 mm aus ABS� Attachment piece ABS
48950
with slotted cover, 150 x 150 mmstainless steel, screwed in
place
Adhesive flange with counterflange 48410suitable for articles
45700, 45770, 45701
* not suitable for articles 45740/45740.20!
Darstellung des kompletten Baukastensystems.
�
�
� ��
�
� �