2011 fluid sensors and diagnostic systems bus, identification and control systems position sensors and object recognition 7844 x Made in Germany 7844 x Made in Germany
Nov 02, 2014
2011
fluid sensors and diagnostic
systems
bus, identification
and control systems
position sensors
and objectrecognition
7844 xMade in Germany7844 xMade in Germany
visit our website:
www.ifm.com
Over 70 locations worldwide – at a glance at wwww.ifm.com
ifm electronic gmbhFriedrichstraße 145128 EssenTel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200E-Mail: [email protected]
We
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
12/
10
Cer
t n
o. I
MO
-CO
C-0
2782
7
ifm – the company 6 - 7
General information 8 - 9
Standards and approvals / list of articles 10 - 18
Sensors for special applications 20 - 20
Inductive sensors 23 - 52
Capacitive sensors 55 - 63
Magnetic sensors 65 - 66
Cylinder sensors 69 - 72
Valve sensors 75 - 76
Photoelectric sensors 78 - 120
Object recognition 123 - 124
Encoders 127 - 130
Evaluation systems 133 - 136
Evaluation systems for safety and EX 138 - 146
Level sensors 149 - 155
Flow sensors 157 - 166
Pressure sensors 169 - 184
Temperature sensors 187 - 191
Diagnostic systems 193 - 195
Bus system AS-interface 197 - 201
Control systems for mobile vehicles 203 - 207
Power supplies 209 - 211
Connection technology 213 - 218
ifm – worldwide addresses 220 - 221
The company in your vicinity.
State-of-the-art communication.
With the right address – www.ifm.com – only a mouse click separates you from theworld of automation technology. See the power of our products in interactiverepresentations. Gain an impression with 3-dimension-al views of our units. Down-load CAD drawings for direct integration in your applications. Or order online inifm’s e-shop - fast, convenient and reliable.
We are there for you.
Close contact with our customers is part of our success. Therefore we haveconsistently developed our sales network right from the start. Today ifm electronic isrepresented in more than 70 countries – close to you! With application advice andservice at the heart of our operation. For the introduction of new products andtechnologies we support you with workshops and seminars in our training centres orin your plant.
Security by success.
Since its foundation in 1969 ifm electronic has constantly grown, now having morethan 3300 employees worldwide, and achieved a turnover of more than EUR 340million in 2009. This success gives you the security of having a reliable partner for theimplementation of your automation projects. Comprehensive service and a warrantyof up to 5 years on standard units are just two examples of this reliability.
sale
s de
velo
pmen
t in
mill
ion
EU
R
2000 2010199019801970
100
0
200
300
400
500Turnoverdevelopmentsince 1970.
ifm – the company
6
branch officetrade partner
ifm – the company
7
A sign of innovation.
Not only components.
ifm stands for a large range of different sensors and systems for automation. Ourrange of of more than 7,800 articles guarantees flexibility and compatibility. So thereis always a reliable solution for your automation projects – from the individual sensorwith practical accessories to the complete system.
Availability guaranteed.
Your deadlines matter to us. That is why we are constantly optimising our productionprocesses in order to be able to quickly and flexibly produce large quantities at aconstantly high quality – and to continue to shorten delivery times. Your order isdispatched via our centralised logistics centre reliably and on time.
Quality as part of our philosophy.
The quality standard of our products is an integral part of our company philosophy.And we guarantee it! So we provide you, the users, with a maximum degree ofsecurity: By means of our own production technology, ifm film technology, as well asby means of extensive quality assurance measures such as 100 % final testing.By quality we understand, for example, ecologically conscious production – Made inGermany!
The developmentof innovativeproducts is oneof our corecompetences.Under the name ofi-step we havecome up with anew product gene-ration whichimplements sophi-sticated technolo-gies in industriallycompatible andeasy to handleproducts. Fromhigh-quality stan-dard solutions toproducts speciallytailored to therequirements ofthe individualindustries – frommobile machinesto the foodindustry.
www.ifm.comInformation around the clock andaround the globe in 22 languages on the internet.
• Information
- product innovations- company news- exhibition info- locations- jobs
• Documentation
- data sheets- operating instructions- manuals- approvals- CAD data
• Communication*
- request for documents- recall service- live advice- newsletter
• Selection
- interactive product selection aids- configuration tools- data sheet direct
• Animation
- virtual product animations- flash movies (video sequences)
• Application
- applications- product recommendations- calculation aids
• Transaction*
- e-shop processing- e-procurement catalogues- B2B services
*Some offered information is available country-specific
General information
Product selectors and further information can be found at: www.ifm.com
8
General information
Product selectors and further information can be found at: www.ifm.com
9
Convenient order processingvia the e-shop** on the internet.
Secured authentication
Customer-related priceindication
Real time availability check
Personal product favourites
Online parcel tracking
Individual order history
Convenient quick input form
Simple order processing
Management of shippingaddresses
Confirmations by e-mail
** Already available in many countries.
3A 3A Sanitary Standards, Inc. (3-A SSI) is an independent, not-for-profit corporationdedicated to advancing hygienic equipment design for the food, beverage, and phar-maceutical industries.
AS-i Actuator-Sensor Interface. Bus system for the first binary field level.
ATEX Atmosphère Explosible. ATEX comprises the directives of the European Union in thefield of explosion protection. On the one hand there is the 94/9/EC ATEX productdirective and on the other hand the 1999/92/EC ATEX operation directive.
CCC CCC (China Compulsory Certification) is a compulsory Chinese certification for cer-tain products put on the market in China. Which products are concerned is specifiedin a catalogue created by the Chinese authorities.
cCSAus Testing a product by CSA according to the safety standards applicable in Canada andthe USA.
CE Conformité Européenne. By affixing the CE marking to a product, the manufacturerdeclares that it meets EU safety, health and environmental requirements.
cRUus Testing components by UL according to the safety standards applicable in Canadaand the USA. Components can be used when the „condition of acceptability“ iscomplied with for the final product.
CSA Canadian Standards Association. A non-governmental Canadian organisation thatsets standards and tests and certifies products for their reliability. By now it is activeworldwide.
cULus Testing components by UL according to the safety standards applicable in Canadaand the USA.
DIBt (WHG) Deutsches Institut für Bautechnik (Federal Water Act). The Federal Water Act (WHG)is the essential part of the German law relating to water . It contains provisions forthe protection and use of surface water and ground water and also regulationsabout the expansion of waters, water planning and flood protection.
e1 Approval by the Kraftfahrt-Bundesamt (German Federal Motor Transport Authority).The e1 type approval by the German Federal Motor Transport Authority certifies thatthe units comply with the automotive standards. Units with this marking are allowedto be mounted on vehicles without expiry of their operating permit.
EHEDG European Hygienic Engineering & Design Group. US-American supervisory authorityfor food and drugs. This authority grants approvals for products and materials usedin the food and pharmaceutical industries.
FDA Food and Drug Administration. US-American supervisory authority for food anddrugs. This authority grants approvals for products and materials used in the foodand pharmaceutical industries.
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
10
FM Factory Mutual Research. A US-based insurance company that specializes in loss pre-vention services in the property insurance market sector. They provide material rese-arch, material testing and certifications in the field of fire and explosion protection.
PROFIBUS Process Field Bus. Fieldbus system for important data quantities. It is available in seve-ral versions such as Profibus FMS, DP or PA. Profibus DP can be used over longerdistances, e.g. as fieldbus for AS-i.
TÜV Technischer Überwachungs Verein (technical inspection association). The GermanTÜV is a private-sector body carrying out technical safety tests that are stipulated bygovernment laws or instructions.
UL Underwriters Laboratories. An organisation founded in the USA for testing and certi-fying products and their safety.
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
11
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
12
Orderno.
Approvals Cataloguepage
AC1147 CE 198
AC1218 CE, CRUUS 198, 210
AC2057 CE 199
AC2218 CE, CUL 198
AC2225 CE 198
AC2250 CE, CRUUS 198
AC2251 CE, CRUUS 198
AC2257 CE, CRUUS 198
AC2264 CE, CRUUS 198
AC2417 CE, CUL 198
AC2904 CE, CUL 199
AC4000 CE 200
AC4002 CE 200
AC5000 CUL 199
AC5003 CUL 199
AC5005 200
AC5010 CUL 199
CR0020 CE, E1 204
CR0505 CE, E1 204
CR1051 CE, E1 204
CR3004 CE 205
DA0001 CE 135
DD0001 CE 134
DD2003 CE, CUL 134
DD2105 CE, CUL 134
DI5001 CE 135
DL2003 CE, CUL 135
DN2012 CE, CUL 210
DN2013 CE, CUL 210
DN2032 CE, CUL 210
DN2033 CE, CUL 210
DW2003 CE, CUL 134
E10013 215
E10058 216
E10136 214
E10191 215
E10193 179, 189, 43
E11248 CRUUS 215
E11504 CRUUS 216
E11505 CRUUS 216
E11508 CRUUS 214
E11509 CRUUS 214
E11796 71
E11799 71
E11801 71
E11820 70
E20005 92
E20722 103, 114
E21085 114, 92
E30000 152, 180
Orderno.
Approvals Cataloguepage
E30006 152, 180
E30007 152, 180
E30013 EHEDG 180
E30052 FDA 152, 180
E30056 EHEDG 153, 190
E33001 152, 180
E33002 180
E40096 162, 190
E40099 162, 190
E40101 162, 189
E40104 162, 189
E40124 162, 189
E40151 162
E40153 162
E60066 129
E60120 129
E70231 199
EC1453 206
EC2013 206
EC2046 206
EC2061 CE 204
EC2080 124, 194
ENC10A 217
EVC001 CRUUS 214
EVC002 CRUUS 214
EVC003 CRUUS 215
EVC004 CRUUS 214
EVC005 CRUUS 214
EVC006 CRUUS 214
EVC007 CRUUS 215
EVC008 CRUUS 215
EVC009 CRUUS 215
EVC074 CRUUS 215
EVC150 CRUUS 214
EVC151 CRUUS 214
EVT001 CRUUS 216
EVT002 CRUUS 216
EVT004 CRUUS 216
EVT005 CRUUS 216
EVT067 CRUUS 216
G1501S CE, CUL 120, 142, 42
I7R201 CE, CUL, (CCC) 31
I7R202 CE, CUL, (CCC) 32
I7R203 CE, CUL, (CCC) 31
I7R204 CE, CUL, (CCC) 32
I7R205 CE, CUL, (CCC) 31
I7R206 CE, CUL, (CCC) 32
I7R207 CE, CUL, (CCC) 32
I7R208 CE, CUL, (CCC) 32
I7R209 CE, CUL, (CCC) 32
Standards and approvals /list of articles
(CCC) = CCC approval is not required
13
Orderno.
Approvals Cataloguepage
I7R210 CE, CUL, (CCC) 32
I7R211 CE, CUL, (CCC) 32
I7R212 CE, CUL, (CCC) 32
I7R213 CE, CUL, (CCC) 32
I7R214 CE, CUL, (CCC) 32
I7R215 CE, CUL, (CCC) 32
I7R216 CE, CUL, (CCC) 32
I7R217 CE, CUL 32
IA0004 CCC, CE 33
IA0027 CCC, CE 33
IA0032 CCC, CE, CUL 33
IA5062 CE, CUL, (CCC) 28
IA5082 CE, (CCC) 28
IA5122 CCC, CE, CUL 28
IB0004 CCC, CE 34
IB0016 CCC, CE, CUL 34
IB0017 CE, CCC 34
IB0026 CCC, CE 34
IB0027 CE, CCC 34
IB5063 CE, CUL, (CCC) 29
IB5096 CE, (CCC) 29
IB5124 CCC, CE, CUL 29
IC0003 CCC, CE, CUL 35
IC5005 CE, CUL, (CCC) 31
ID0013 CCC, CE, CUL 35
ID0014 CE, CCC 35
ID5005 CE, CUL, (CCC) 31
ID5026 CE, (CCC) 31
IE5202 CE, (CCC) 25
IE5222 CE, (CCC) 25
IE5258 CE, CUL, (CCC) 25
IE5287 CE, CUL, (CCC) 25
IE5312 CE, (CCC) 25
IE5338 CE, CUL, (CCC) 25
IE5343 CE, CUL, (CCC) 25
IE5345 CE, CUL, (CCC) 25
IE5351 CE, CUL, (CCC) 25
IE5381 CE, (CCC) 37
IER200 CE, CUL, (CCC) 39
IER201 CE, CUL, (CCC) 39
IER203 CE, (CCC) 40
IER204 CE, (CCC) 40
IER205 CE, (CCC) 41
IER206 CE, (CCC) 40
IF0001 CCC, CE 33
IF0003 CE, CCC 33
IF0005 CCC, CE 33
IF0007 CCC, CE 33
IF5249 CE, (CCC) 26
IF5297 CE, (CCC) 25
Orderno.
Approvals Cataloguepage
IF5313 CE, CCC 25
IF5329 CE, (CCC) 26
IF5597 CE, CCC 26
IF5598 CCC, CE, CUL 26
IF5646 CCC, CE 26
IF5647 CCC, CE, CUL 26
IF5750 CE, CUL, (CCC) 42
IF5796 CE, (CCC) 37
IFC202 CE, CUL, (CCC) 37
IFC204 CE, CUL, (CCC) 37
IFC205 CE, CUL, (CCC) 37
IFC206 CE, CUL, (CCC) 37, 38
IFC207 CE, CUL, (CCC) 37
IFC229 CE, CUL, (CCC) 37
IFR200 CE, CUL, (CCC) 39
IFR202 CE, CUL, (CCC) 39
IFR203 CE, CUL, (CCC) 40
IFR204 CE, CUL, (CCC) 41
IFR205 CE, CUL, (CCC) 41
IFR206 CE, CUL, (CCC) 40
IFS204 CE, CUL, (CCC) 24
IFS208 CE, CUL, (CCC) 24
IFT200 CE, CUL, (CCC) 35
IFT204 CE, CUL, (CCC) 35
IFT205 CE, CUL, (CCC) 35
IFT208 CE, CUL, (CCC) 36
IFW200 CE, CUL, (CCC) 41
IG0005 CE, CUL, CCC 33
IG0006 CE, CUL, CCC 33
IG0011 CCC, CE, CUL 33
IG0012 CCC, CE 33
IG5221 CE, (CCC) 26
IG5285 CE, (CCC) 26
IG5397 CE, (CCC) 26
IG5398 CE, (CCC) 26
IG5401 CE, (CCC) 26
IG5533 CCC, CE 26
IG5594 CCC, CE 26
IG5595 CCC, CE, CUL 27
IG5596 CCC, CE 27
IG5597 CCC, CE 27
IG5719 CCC, CE 27
IG5846 CE, (CCC) 37
IGC202 CE, CUL, (CCC) 38
IGC204 CE, CUL, (CCC) 38
IGC210 CE, CUL, (CCC) 38
IGR200 CE, CUL, (CCC) 39
IGR202 CE, CUL, (CCC) 39
IGR203 CE, CUL, (CCC) 40
IGR204 CE, CUL, (CCC) 41
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
14
Orderno.
Approvals Cataloguepage
IGR205 CE, CUL, (CCC) 41
IGR206 CE, CUL, (CCC) 40
IGS204 CE, CUL, (CCC) 24
IGS205 CE, CUL, (CCC) 24
IGS209 CE, CUL, (CCC) 24
IGT200 CE, CUL, (CCC) 36
IGT203 CE, CUL, (CCC) 36
IGT204 CE, CUL, (CCC) 36
IGT205 CE, CUL, (CCC) 36
IGT206 CE, CUL, (CCC) 36
IGW200 CE, CUL, (CCC) 41
II0005 CE, CCC 33
II0006 CE, CCC 34
II0011 CE, CUL, CCC 34
II0012 CE, CUL, CCC 34
II5256 CE, (CCC) 27
II5284 CE, (CCC) 27
II5300 CE, (CCC) 27
II5369 CE, (CCC) 27
II5436 CE 27
II5489 CE, CCC 27
II5491 CCC, CE 28
II5492 CE, CCC 28
II5493 CE, CCC 27
IIC200 CE, CUL, (CCC) 38
IIC221 CE, CUL, (CCC) 199, 39
IIR200 CE, CUL, (CCC) 39
IIR202 CE, CUL, (CCC) 40
IIR203 CE, CUL, (CCC) 40
IIR204 CE, CUL, (CCC) 41
IIR205 CE, CUL, (CCC) 41
IIR206 CE, CUL, (CCC) 40
IIS206 CE, CUL, (CCC) 24
IIT205 CE, CUL, (CCC) 36
IIT209 CE, CUL, (CCC) 36
IIW200 CE, CUL, (CCC) 42
IM0010 CCC, CE, CUL 35
IM0011 CCC, CE, CUL 34
IM5019 CE, CUL, (CCC) 30
IM5020 CE, CUL, (CCC) 30
IM5037 CCC, CE 31
IM5038 CCC, CE 31
IM5046 CE, (CCC) 30
IM5115 CE, CUL, (CCC) 30
IM5116 CE, CUL, (CCC) 30
IM5117 CE, CUL, (CCC) 30
IM5118 CE 199, 30
IM5123 CE, CUL, (CCC) 30
IM5132 CE, CUL, (CCC) 30, 42
IN0073 CCC, CE 34
Orderno.
Approvals Cataloguepage
IN0077 CCC, CE 34
IN0081 CCC, CE 34
IN5121 CE, (CCC) 29
IN5129 CE, (CCC) 29
IN5208 CCC, CE, CUL 29
IN5212 CE, CUL, (CCC) 29
IN5224 CE, (CCC) 76
IS5001 CE, CUL, (CCC) 29
IS5035 CE, CUL, (CCC) 29
IT5001 CE, (CCC) 28
IT5040 CE, CUL, (CCC) 28
IV5003 CE 31
IV5004 CE 31
IW5051 CE, (CCC) 30
IW5053 CE, (CCC) 30
IY5029 CE, (CCC) 24
IY5036 CE, CUL, (CCC) 24
JAC201 CE, (CCC) 112
KB0025 CCC, CE, CUL 57
KB0029 CCC, CE, CUL 57
KB5004 CE, CUL, (CCC) 57
KD0009 CCC, CE 58
KD5018 CE, (CCC) 57
KD5022 CE, (CCC) 57
KF5001 CE, CUL 56
KG5040 CCC, CE 56
KG5043 CE, (CCC) 56
KG5047 CCC, CE 56
KG5069 CE, CUL 58
KI0016 CCC, CE, CUL 57
KI0020 CCC, CE, CUL 57
KI0024 CCC, CE, CUL 57
KI0042 CE 59
KI5002 CE, CUL, (CCC) 56
KI5023 CCC, CE, CUL 56
KI5030 CCSAUS, CE, FM, IEC 59
KI5083 CE, CUL 58
KI5084 CE, CUL 56
KI5085 CE, CUL 56
KI5086 CE, CUL 56
KI5087 CE, CUL 56
KN5121 CE, (CCC) 58
KQ6001 CE, CUL 58
KX5001 CCSAUS, CE, FM 59
LK1222 CE 150
LK1223 CE 150
LK1224 CE 150
LK3122 CE, CUL 150
LK3123 CE, CUL 150
LK3124 CE, CUL 150
Standards and approvals /list of articles
(CCC) = CCC approval is not required
15
Orderno.
Approvals Cataloguepage
LK8122 CE, CUL 150
LK8123 CE, CUL 150
LK8124 CE, CUL 150
LR3000 CE, CUL 151
LR7000 CE, CUL 151
LR8000 CE, CUL 151
MFS201 CE, CUL, (CCC) 66
MGS200 CE, CUL, (CCC) 66
MGS201 CE, CUL, (CCC) 66
MK5100 CE, CUL, (CCC) 70
MK5101 CE, CUL, (CCC) 70
MK5103 CE, CUL, (CCC) 70
MK5104 CE, CUL, (CCC) 70
MK5139 CE, CUL, (CCC) 70
MK5140 CE, CUL, (CCC) 70
N0530A CE 146, 43, 59
NG5003 CCSAUS, CE, FM 42
NI5002 CCSAUS, CE, FM, IEC 43
NM500A CCSAUS, CE, FM 43
O1D100 CE, CUL, (CCC) 108
O1D103 CE, CUL, (CCC) 108
O1D105 CE, CUL, (CCC) 108
O1D106 CE, CUL, (CCC) 108
O2D222 CE, CUL 124
O3D200 CE 124
O5C500 CE, CUL 112
O5E200 CE, CUL, (CCC) 90
O5E500 CE, CUL, (CCC) 91
O5E501 CE, CUL, (CCC) 91
O5E502 CE, CUL 91
O5E51A CE, (CCC) 92
O5E700 CE, CUL, (CCC) 102
O5G500 CE, CUL, (CCC) 112
O5H200 CE, CUL, (CCC) 90
O5H201 CE, CUL, (CCC) 91
O5H500 CE, CUL, (CCC) 92
O5H501 CE, CUL, (CCC) 92
O5H503 CE, CUL, (CCC) 92
O5H504 CE, CUL 92
O5H700 CE, CUL, (CCC) 103
O5K500 CE, CUL, (CCC) 112
O5P200 CE, CUL, (CCC) 90
O5P201 CE, CUL, (CCC) 90
O5P500 CE, CUL, (CCC) 91
O5P501 CE, CUL, (CCC) 91
O5P502 CE, (CCC) 91
O5P700 CE, CUL, (CCC) 103
O5S200 CE, CUL, (CCC) 90
O5S500 CE, CUL, (CCC) 91
O5S501 CE, CUL, (CCC) 91
Orderno.
Approvals Cataloguepage
O5S700 CE, CUL, (CCC) 102
OF5016 CE, CUL, (CCC) 82
OF5027 CE, CUL, (CCC) 82
OG0043 CCC, CE 83
OG5124 CE, CUL, (CCC) 85
OGE100 CE, CUL, (CCC) 82
OGE101 CE, CUL, (CCC) 82
OGE102 CE, CUL, (CCC) 82
OGE103 CE, CUL, (CCC) 82
OGE200 CE, CUL, (CCC) 82
OGE201 CE, CUL, (CCC) 82
OGE280 CE, CUL, (CCC) 87
OGE281 CE, CUL, (CCC) 87
OGE282 CE, CUL, (CCC) 87
OGE300 CE, CUL, (CCC) 86
OGE301 CE, CUL, (CCC) 86
OGE302 CE, CUL, (CCC) 85
OGE303 CE, CUL, (CCC) 86
OGE500 CE, CUL, (CCC) 84
OGE502 CE, CUL, (CCC) 84
OGE700 CE, CUL, (CCC) 102
OGE701 CE, (CCC) 102
OGH200 CE, CUL, (CCC) 84
OGH280 CE, CUL, (CCC) 88
OGH281 CE, CUL, (CCC) 88
OGH282 CE, CUL, (CCC) 88
OGH283 CE, CUL, (CCC) 88
OGH300 CE, CUL, (CCC) 87
OGH301 CE, CUL, (CCC) 87
OGH302 CE, CUL, (CCC) 87
OGH303 CE, CUL, (CCC) 87
OGH304 CE, CUL, (CCC) 87
OGH305 CE, CUL, (CCC) 87
OGH306 CE, CUL, (CCC) 86
OGH307 CE, CUL, (CCC) 86
OGH308 CE, CUL, (CCC) 86
OGH309 CE, CUL, (CCC) 86
OGH310 CE, CUL, (CCC) 86
OGH311 CE, CUL, (CCC) 87
OGH500 CE, CUL, (CCC) 85
OGH501 CE, CUL, (CCC) 85
OGH502 CE, CUL, (CCC) 85
OGH504 CE, CUL, (CCC) 85
OGH580 CE, CUL, (CCC) 88
OGH581 CE, CUL, (CCC) 88
OGH700 CE, CUL, (CCC) 102
OGP100 CE, CUL, (CCC) 83
OGP101 CE, CUL, (CCC) 83
OGP102 CE, CUL, (CCC) 83
OGP103 CE, CUL, (CCC) 83
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
16
Orderno.
Approvals Cataloguepage
OGP200 CE, CUL, (CCC) 83
OGP201 CE, (CCC) 83
OGP280 CE, CUL, (CCC) 88
OGP281 CE, CUL, (CCC) 88
OGP282 CE, CUL, (CCC) 88
OGP283 CE, CUL, (CCC) 88
OGP300 CE, CUL, (CCC) 86
OGP301 CE, CUL, (CCC) 86
OGP302 CE, CUL, (CCC) 86
OGP303 CE, CUL, (CCC) 86
OGP500 CE, CUL, (CCC) 84
OGP502 CE, CUL, (CCC) 84
OGP503 CE, CUL, (CCC) 84
OGP700 CE, CUL, (CCC) 102
OGP701 CE, CUL, (CCC) 102
OGS100 CE, CUL, (CCC) 82
OGS200 CE, CUL, (CCC) 82
OGS280 CE, CUL, (CCC) 87
OGS300 CE, CUL, (CCC) 86
OGS301 CE, CUL, (CCC) 85
OGS500 CE, CUL, (CCC) 84
OGS501 CE, CUL, (CCC) 84
OGS700 CE, CUL, (CCC) 102
OGS701 CE, CUL, (CCC) 102
OGT100 CE, CUL, (CCC) 83
OGT101 CE, CUL, (CCC) 83
OGT102 CE, CUL, (CCC) 83
OGT103 CE, CUL, (CCC) 83
OGT200 CE, CUL, (CCC) 83
OGT500 CE, CUL, (CCC) 85
OJ5008 CE, CUL, (CCC) 90
OJ5010 CE, CUL, (CCC) 90
OJ5028 CE, CUL, (CCC) 89
OJ5031 CE, CUL, (CCC) 89
OJ5033 CE, CUL, (CCC) 89
OJ5122 CE, CUL, (CCC) 90
OJ5126 CE, CUL, (CCC) 89
OJ5130 CE, CUL, (CCC) 89
OJ5131 CE, CUL, (CCC) 89
OJE200 CE, CUL, (CCC) 89
OJH200 CE, CUL, (CCC) 89
OJP200 CE, CUL, (CCC) 89
OJR200 CE, CUL, (CCC) 89
OJS200 CE, CUL, (CCC) 88
OPU200 CE, (CCC) 113
OPU201 CE, CUL, (CCC) 113
OPU202 CE, CUL, (CCC) 113
OPU203 CE, CUL, (CCC) 113
OPU204 CE, CUL, (CCC) 113
OPU205 CE, CUL, (CCC) 113
Orderno.
Approvals Cataloguepage
OPU207 CE, (CCC) 113
OPU208 CE, CUL, (CCC) 113
OPU209 CE, CUL, (CCC) 113
OPU210 CE, CUL, (CCC) 113
OPU211 CE, CUL, (CCC) 113
PA3020 CE, CUL 175, 204
PA3021 CE, CUL 175, 204
PA3022 CE, CUL 175, 204
PA3023 CE, CUL 175, 204
PA3024 CE, CUL 175, 204
PA3026 CE, CUL 175
PA3027 CE, CUL 175
PA3029 CE, CUL 176
PA9021 CE 176, 205
PA9024 CE, CUL 176, 205
PF2054 CE, CUL, EHEDG, FDA 179
PG2789 CE, EHEDG, FDA 152, 179
PG2793 CE, CUL, EHEDG, FDA 178
PG2794 CE, CUL, EHEDG, FDA 178
PG2795 CE, CUL, EHEDG, FDA 178
PG2796 CE, CUL, EHEDG, FDA 152, 178
PG2797 CE, CUL, EHEDG, FDA 152, 178
PG2798 CE, CUL, EHEDG, FDA 152, 178
PG2799 CE, CUL, EHEDG, FDA 152, 179
PI1093 CE, CUL, EHEDG, FDA 177
PI1094 CE, CUL, EHEDG, FDA 177
PI1095 CE, CUL, EHEDG, FDA 177
PI1096 CE, CUL, EHEDG, FDA 177
PI1097 CE, CUL, EHEDG, FDA 152, 177
PI1098 CE, CUL, EHEDG, FDA 152, 177
PI1099 CE, CUL, EHEDG, FDA 152, 177
PI1693 CE, CUL, EHEDG, FDA 177
PI1694 CE, CUL, EHEDG, FDA 177
PI1696 CE, CUL, EHEDG, FDA 177
PI1697 CE, CUL, EHEDG, FDA 177
PI1698 CE, CUL, EHEDG, FDA 178
PI2094 CE, CUL, EHEDG, FDA 178
PI2096 CE, CUL, EHEDG, FDA 178
PI2097 CE, CUL, EHEDG, FDA 151, 178
PI2098 CE, CUL, EHEDG, FDA 151, 178
PK6220 CE, CUL 173
PK6222 CE, CUL 173
PK6224 CE, CUL 173
PK6520 CE, CUL 173
PK6521 CE, CUL 173
PK6522 CE, CUL 173
PK6523 CE, CUL 173
PK6524 CE, CUL 173
PK6730 CE, CUL 173
PK6731 CE, CUL 173
Standards and approvals /list of articles
(CCC) = CCC approval is not required
17
Orderno.
Approvals Cataloguepage
PK6732 CE, CUL 173
PK6734 CE, CUL 173
PM2058 CE, CUL, EHEDG, FDA 179
PM2657 CE, CUL, EHEDG, FDA 179
PM2658 CE, CUL, EHEDG, FDA 179
PN2009 CE, CUL 170
PN2020 CE, CUL 170
PN2021 CE, CUL 170
PN2022 CE, CUL 170
PN2023 CE, CUL 170
PN2024 CE, CUL 170
PN2026 CE, CUL 170
PN2027 CE, CUL 170
PN2028 CE, CUL 170
PN3001 CE, CUL 170
PN3003 CE, CUL 170
PN3004 CE, CUL 170
PN3060 CE 170
PN5000 CE, CUL 171
PN5001 CE, CUL 171
PN5002 CE, CUL 171
PN5003 CE, CUL 171
PN5004 CE, CUL 171
PN5006 CE, CUL 171
PN5007 CE, CUL 171
PN5200 CE, CUL 171
PN5201 CE, CUL 171
PN5202 CE, CUL 171
PN5203 CE, CUL 171
PN5204 CE, CUL 171
PN5206 CE, CUL 171
PN5207 CE, CUL 171
PN7000 CE, CUL 172
PN7001 CE, CUL 172
PN7002 CE, CUL 172
PN7003 CE, CUL 172
PN7004 CE, CUL 172
PN7006 CE, CUL 172
PN7007 CE, CUL 172
PN7009 CE, CUL 172
PN7060 CE 171
PN7200 CE, CUL 172
PN7201 CE, CUL 172
PN7202 CE, CUL 172
PN7203 CE, CUL 172
PN7204 CE, CUL 172
PN7206 CE, CUL 172
PN7207 CE, CUL 172
PN7209 CE, CUL 172
PNI024 CE 176
Orderno.
Approvals Cataloguepage
PQ7809 CE, CUL 177
PQ7834 CE, CUL 177
PS3208 CE 151, 176
PS3407 CE 151, 176
PS3417 CE 151, 176
PS7570 CE 176
PT3540 CE, CUL 173
PT3541 CE, CUL 174
PT3542 CE, CUL 174
PT3543 CE, CUL 174
PT3544 CE, CUL 174
PT3550 CE, CUL 174, 205
PT3551 CE, CUL 174, 205
PT3552 CE, CUL 174, 205
PT3553 CE, CUL 174, 205
PT3554 CE, CUL 175, 205
PT9540 CE, CUL 174
PT9541 CE, CUL 174
PT9542 CE, CUL 174
PT9543 CE, CUL 174
PT9544 CE, CUL 174
PT9550 CE, CUL 175, 205
PT9551 CE, CUL 175, 205
PT9552 CE, CUL 175, 205
PT9553 CE, CUL 175, 205
PT9554 CE, CUL 175, 205
RB6007 CE, C_NRTL_US 128
RB6013 CE, CRUUS 128
RB6015 CE, C_NRTL_US 128
RV1016 CE, C_NRTL_US 128
RV1024 CE, C_NRTL_US 128
RV1025 CE, C_NRTL_US 128
RV1033 CE, C_NRTL_US 128
RV1036 CE, C_NRTL_US 128
RV1051 CE, C_NRTL_US 128
RV6001 CE, C_NRTL_US 128
RV6003 CE, C_NRTL_US 128
RV6009 CE, C_NRTL_US 128
RV6010 CE, C_NRTL_US 128
RV6013 CE, C_NRTL_US 128
RV6016 CE, C_NRTL_US 129
RV6018 CE, C_NRTL_US 129
RV6024 CE, C_NRTL_US 129
RV6025 CE, C_NRTL_US 129
RV6028 CE, C_NRTL_US 129
RV6033 CE, C_NRTL_US 129
RV6034 CE, C_NRTL_US 129
RV6036 CE, C_NRTL_US 129
RV6040 CE, C_NRTL_US 129
RV6100 CE, C_NRTL_US 129
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
18
Orderno.
Approvals Cataloguepage
SBY334 CE, CUL 159
SBY346 CE, CUL 159
SBY357 CE, CUL 159
SD2000 CE, CUL 161
SD5000 CE, CUL 160
SD6000 CE, CUL 161
SD6100 CE, CUL 161
SD8000 CE, CUL 161
SD9000 CE, CUL 161
SF5200 CUL 159
SF5300 CUL 159
SF5350 CUL 159
SI5000 CE, CUL 158
SI5004 CE, CUL 158
SI5006 CE, CUL 158
SI5007 CE, CUL 159
SI5010 CE, CUL 158
SL0101 CE 160
SL5101 CE 160
SM6000 CE, CUL 158
SM7000 CE, CUL 158
SM8000 CE, CUL 158
SN0150 CE, CUL 160
SQ0500 CE, CUL 161
SR0150 CE, CUL 160
SU7000 CE, CUL 161
SU8000 CE, CUL 162
SU9000 CE, CUL 162
TA3130 CE, CUL 188
TA3131 CE, CUL 188
TA3430 CE, CUL, EHEDG 189
TA3431 CE, CUL, EHEDG 189
TK6130 CE, CUL 188
TK7130 CE, CUL 188
TR2432 CE, CUL 188
TT0061 CUL 189
TT2250 CUL 188
VKV021 CE, CUL 194
VKV022 CE, CUL 194
VSA001 CE, CUL 194
VSE002 CE, CUL 194
Standards and approvals /list of articles
(CCC) = CCC approval is not required
19
Sensors for special applications
Product selectors and further information can be found at: www.ifm.com
20
AS-Interface
AS-interface (actuator sensor interface)is a worldwide manufacturer-indepen-dent standard for the connection ofactuators and sensors of the first fieldlevel. Data and power supply are jointlytransmitted via a two-wire cable. Wiringcomplexity, documentation and set-uptimes are reduced.
AS-i sensors Page
AS-i sensors 199
ATEX
ATEX (Atmosphère explosible) is a briefdescription of the uniform EU directives94/9/EC (for manufactures of units forhazardous areas) and 1999/92/EC (foroperators of plants for hazardous areas)governing the safety requirements forexplosion-hazardous areas. Since 30June 2003, units for hazardous areashave to be approved to 94/9/EU regula-tions. For further information aboutinternational directives see the „Appro-vals“ chapter.
Sensors for hazardous areas (ATEX) Page
Inductive sensors 42 - 43
Capacitive sensors 59
Photoelectric sensors 92
e1 type approval
The e1 type approval by the GermanFederal Motor Transport Authority certi-fies that the units comply with the auto-motive standards.
Sensors with e1 approval Page
Pressure sensors 204 - 205
IO-Link
IO-Link is a field-bus independent andopen point-to-point communicationinterface. It is a low-cost possibility totransmit parameter, diagnosis and pro-cess data from a sensor or an actuatorvia an I/O module.
Sensors with IO-Link Page
Temperature sensors 188
Sensors for special applications
Product selectors and further information can be found at: www.ifm.com
21
Sensors for almost all application areas.
Wide choice of housing styles andoperating voltages.
High-quality housing materials.
Cylindrical housings: Ø 3…34 mm, rectan-gular housings: 5 x 5 x 24 to 105 x 80 x 40.
Extensive range of fixing accessoriesand connection technology.
Inductive sensors
In all automated processes sensors are absolutely necessary to provide the PLC withinformation. They supply the necessary signals on positions, limits or serve as pulsepick-ups for counting tasks or for monitoring rotational speed. Inductive andcapacitive sensors are nowadays indispensable for industrial usage. As compared tomechanical switches they offer ideal conditions: non-contact operation free fromany wear and tear, high switching frequencies and accuracy. In addition, they areinsensitive to vibration, dust and moisture. Inductive sensors detect all metalswithout contact.
Operating principle of inductive sensors
Inductive sensors take advantage of the physical effect of the change in the qualityfactor in a resonant circuit caused by eddy current losses in conductive materials.This is how it works: An LC tuned circuit generates a high frequency electromag-netic field. This field is radiated from the active face of the sensor. If a conductivematerial enters this field, eddy currents will be formed in accordance with the lawof inductance which draw energy from the oscillator. This reduces the oscillationamplitude. The change is converted into a switching signal. The operating principlepermits detection of all metals irrespective of whether they are moving or not.
Application sensors
Every application has its own requirements as regards the sensors to be used.Temperature shocks, mechanical influences or aggressive cleaning agents are just afew of the possible environmental influences to which sensors are subjected. ifmelectronic therefore offers inductive sensors which have been developed for specialapplications. This includes for example the use of selected housing materials suchas stainless steel, LCP, PEEK, PBT or Duroplast. An innovative, consistent sealingconcept from the sensor to the connector ensures ideal protection against ingressof moisture and aggressive media.
Typical application:Positioning sensing inautomation technol-ogy; inductive sensorsoperate reliably andwithout wear.
High frequencyelectromagnetic field:The inductive sensor
detects all metals.
Inductive sensors
22Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Sensors with increased sensing range for industrial applications 24
Sensors for industrial applications, threaded housings 24 - 28
Sensors with smooth sleeve for industrial applications 28 - 29
Sensors for industrial applications, rectangular housings 29 - 31
Ring sensors for industrial applications 31 - 32
Sensors for industrial applications, AC and AC/DC 33 - 35
Sensors for hygienic and wet areas with increased sensing range 35 - 36
Sensors for hygienic and wet areas 37
Sensors for oils and coolants with increased sensing range 37 - 38
Sensors for oils and coolants with ceramic sensing face 38
Sensors for oils and coolants, AS-i system 39
Full metal sensors with non-stick coating against weld spatter 39 - 41
Electromagnetic field immune sensors with correction factor K = 1 41 - 42
Electromagnetic field immune sensors 42
Safety relays with relay outputs for fail-safe sensors 42
Sensors with ATEX approval 1D / 2G 42 - 43
Sensors with ATEX approval 1D / 1G / 2G 43
Switching amplifiers with ATEX approval 43
Accessories for sensors with smooth sleeve 43
Wiring diagrams 43 - 45
Scale drawings / drawing no. – CAD download: www.ifm.com 45 - 52
Inductive sensors
23
Sensors with increased sensing range for industrial applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M12 / L = 45 4 f brass 10...36 IP67 700 100 50 IFS204
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 26 · Connector groups 2, 3, 4, 5
M12 / L = 70 4 f brass 10...30 IP67 500 100 51 IFS208
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M18 / L = 46 8 f brass 10...36 IP67 400 100 53 IGS204
M18 / L = 51 12 nf brass 10...36 IP67 300 100 54 IGS205
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 26 · Connector groups 2, 3, 4, 5
M18 / L = 70 12 nf brass 10...30 IP67 300 100 IGS209
M30 / L = 70 15 f brass 10...36 IP67 100 100 67 IIS206
f = flush / nf = non flush
Sensors for industrial applications, threaded housings
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M5 / L = 30 0.8 f stainless steel 10...36 IP65 2000 100 1 IY5029
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2
M5 / L = 45 0.8 f stainless steel 10...36 IP65 2000 100 2 IY5036
Inductive sensors
24Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 24
M8 / L = 50 1 f brass 5...36 IP67 2000 200 3 IE5222
M8 / L = 50 2 nf PBT (Pocan) 5...36 IP67 2000 200 3 IE5202
Cable 2 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25
M8 / L = 37 3 f brass 10...30 IP67 1000 100 4 IE5343
M8 / L = 37 5 nf brass 10...30 IP67 700 100 5 IE5345
Cable with connector 0.3 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 26 · Connector groups 2, 3, 4, 5
M8 / L = 37 3 f brass 10...30 IP67 1000 100 4 IE5351
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group —
M8 / L = 50 2 f brass 10...36 IP67 1000 250 6 IE5287
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 3 · Connector group —
M8 / L = 50 1 f brass 10...36 IP65 > 2000 250 7 IE5258
M8 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 26
M8 / L = 40 3 f brass 10...30 IP67 1000 100 8 IE5338
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M8 / L = 62 2 f brass 10...36 IP67 1000 250 9 IE5312
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M12 / L = 71 2 f brass 10...55 IP67 800 250 10 IF5297
M12 / L = 71 2 f PBT 10...55 IP67 800 250 10 IF5313
Inductive sensors
25You can find wiring diagrams from page 43
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M12 / L = 35 4 nf brass 10...36 IP67 1500 150 11 IF5249
M12 / L = 71 4 nf brass 10...36 IP67 1500 250 12 IF5329
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 24
M12 / L = 71 4 nf brass 10...55 IP67 1500 400 12 IF5646
M12 / L = 71 4 nf PBT 10...55 IP67 1500 400 10 IF5597
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 2, 4
M12 / L = 83 2 f brass 10...55 IP67 1100 300 13 IF5598
M12 / L = 83 4 nf brass 10...55 IP67 1500 300 14 IF5647
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M18 / L = 38 5 f brass 18...36 IP67 500 150 15 IG5221
M18 / L = 80 5 f brass 10...36 IP67 500 250 16 IG5397
M18 / L = 38 8 nf brass 18...36 IP67 200 150 17 IG5285
M18 / L = 80 8 nf brass 10...36 IP67 300 250 18 IG5398
M18 / L = 80 8 nf PBT 10...36 IP67 300 250 16 IG5401
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 24
M18 / L = 80 5 f brass 10...55 IP67 700 400 16 IG5594
M18 / L = 80 8 nf PBT 10...55 IP67 300 400 16 IG5533
Inductive sensors
26Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 24
M18 / L = 80 8 nf brass 10...55 IP67 300 400 18 IG5596
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 2, 4
M18 / L = 70 5 f brass 10...55 IP67 700 400 19 IG5595
M18 / L = 76 8 nf brass 10...55 IP67 300 400 20 IG5597
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 28
M18 / L = 110 8 nf PBT 10...55 IP65 300 400 21 IG5719
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M30 / L = 81 10 f brass 10...36 IP67 250 250 22 II5256
M30 / L = 81 10 f PBT 10...36 IP67 250 250 22 II5369
M30 / L = 81 15 nf brass 10...36 IP67 250 250 23 II5284
M30 / L = 81 15 nf PBT 10...36 IP67 250 250 22 II5300
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 24
M30 / L = 45 10 f brass 10...55 IP67 450 400 24 II5493
M30 / L = 81 10 f brass 10...55 IP67 450 400 22 II5489
M30 / L = 81 15 nf PBT 10...55 IP67 200 400 22 II5436
Inductive sensors
27You can find wiring diagrams from page 43
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 24
M30 / L = 81 15 nf brass 10...55 IP67 200 400 23 II5491
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 2, 4
M30 / L = 78 15 nf brass 10...55 IP67 200 400 25 II5492
f = flush / nf = non flush
Sensors with smooth sleeve for industrial applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
Ø 6.5 / L = 35 1 f brass 10...36 IP67 900 200 26 IT5001
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group —
Ø 6.5 / L = 30 2 f high-grade st. steel 10...30 IP67 1500 100 27 IT5040
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
Ø 20 / L = 77 10 nf PBT 10...36 IP67 300 250 28 IA5082
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 4
Ø 20 / L = 92 10 nf PBT 10...36 IP65 300 250 29 IA5062
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 28
Ø 20 / L = 92 10 nf PBT 10...55 IP65 300 300 29 IA5122
Inductive sensors
28Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
Ø 34 / L = 82 20 nf PBT 10...36 IP67 60 250 30 IB5096
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 28
Ø 34 / L = 98 20 nf PBT 10...55 IP65 300 300 31 IB5124
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 4
Ø 34 / L = 98 20 nf PBT 10...36 IP65 350 250 31 IB5063
f = flush / nf = non flush
Sensors for industrial applications, rectangular housings
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
28 x 10 x 16 2 f PBT 10...36 IP67 800 200 32 IS5001
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group —
28 x 10 x 16 2 f PBT 10...36 IP67 800 200 33 IS5035
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
40 x 12 x 26 2 f PBT 10...36 IP67 1400 250 34 IN5121
40 x 12 x 26 4 nf PBT 10...36 IP67 1300 250 34 IN5129
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 24
40 x 12 x 26 4 nf PBT 10...55 IP67 1200 400 34 IN5208
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group —
40 x 12 x 26 4 nf PBT 10...36 IP65 1300 250 35 IN5212
Inductive sensors
29You can find wiring diagrams from page 43
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
60 x 36 x 10 5 f PBT 10...36 IP67 400 250 36 IW5051
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
60 x 36 x 10 8 nf PBT 10...36 IP67 300 250 36 IW5053
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 100 200 37 IM5115
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 80 200 37 IM5116
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 60 200 37 IM5117
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 6 · Connector groups 2, 4
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 100 200 37 IM5123
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 6 · Connector groups 2, 4, 5
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 37 IM5132
M12 connector · 2-wire · AS-i · Wiring diagram no. 7 · Connector groups 2, 4
40 x 40 x 54 15 f PBT 26.5...31.6 IP67 100 – 37 IM5118
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 4
40 x 40 x 120 15 f PPE 10...36 IP65 350 250 38 IM5020
40 x 40 x 120 20 nf PPE 10...36 IP65 350 250 38 IM5019
40 x 40 x 120 30 nf PPE 10...36 IP65 100 250 38 IM5046
Inductive sensors
30Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 28
40 x 40 x 120 15 f PPE 10...55 IP65 > 350 400 38 IM5037
40 x 40 x 120 20 nf PPE 10...55 IP65 > 300 400 38 IM5038
Terminals · Output function · 4-wire · DC PNP · Wiring diagram no. 8
40 x 40 x 118 15 f PBT 10...60 IP67 150 200 39 IV5003
40 x 40 x 118 20 f PBT 10...60 IP67 150 200 40 IV5004
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 29
90 x 60 x 40 40 nf PPE 10...36 IP65 15 250 41 IC5005
105 x 80 x 40 60 nf PPE 10...36 IP65 100 250 42 ID5005
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
120 x 80 x 30 50 nf PPE 10...36 IP67 100 250 43 ID5026
f = flush / nf = non flush
Ring sensors for industrial applications
Type Insidediameter
[mm]
Operatingprinciple
Minimumdiameter ofthe steel ball
[Ø mm]
Part speedmax.
[m/s]
Pulsestretching
[ms]
Response time /break time
[ms]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 9 · Connector groups 2, 3, 4, 5
10.1 static 1.5 35 10...150 0.5 / 10 44 I7R201
10.1 dynamic 0.6 35 0.1...150 0.2 / 0.2 44 I7R203
15.1 static 2 35 10...150 0.5 / 10 45 I7R205
Inductive sensors
31You can find wiring diagrams from page 43
Type Insidediameter
[mm]
Operatingprinciple
Minimumdiameter ofthe steel ball
[Ø mm]
Part speedmax.
[m/s]
Pulsestretching
[ms]
Response time /break time
[ms]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 9 · Connector groups 2, 3, 4, 5
15.1 dynamic 0.8 35 0.1...150 0.2 / 0.2 45 I7R207
20.1 static 2.5 35 10...150 0.5 / 10 46 I7R209
20.1 dynamic 1.0 35 0.1...150 0.2 / 0.2 46 I7R211
25.1 static 3.0 35 10...150 0.5 / 10 47 I7R213
25.1 dynamic 1.2 35 0.1...150 0.2 / 0.2 47 I7R215
M12 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 10 · Connector groups 2, 3, 4, 5
10.1 static 1.5 35 10...150 0.5 / 10 44 I7R202
M12 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 10 · Connector groups 2, 4
10.1 dynamic 0.6 35 0.1...150 0.2 / 0.2 44 I7R204
15.1 static 2 35 10...150 0.5 / 10 45 I7R206
15.1 dynamic 0.8 35 0.1...150 0.2 / 0.2 45 I7R208
20.1 static 2.5 35 10...150 0.5 / 10 46 I7R210
20.1 dynamic 1.0 35 0.1...150 0.2 / 0.2 46 I7R212
25.1 static 3.0 35 10...150 0.5 / 10 47 I7R214
25.1 dynamic 1.2 35 0.1...150 0.2 / 0.2 47 I7R216
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 9 · Connector groups 2, 3, 4, 5
51 static 6 35 10...150 0.5 / 10 48 I7R217
Inductive sensors
32Product selectors and further information can be found at: www.ifm.com
Sensors for industrial applications, AC and AC/DC
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · AC · Wiring diagram no. 11
M12 / L = 71 2 f PBT 20...250 IP67 25 250 10 IF0001*
M12 / L = 71 2 f brass 20...250 IP67 25 250 10 IF0005*
M12 / L = 71 4 nf PBT 20...250 IP67 25 250 10 IF0003*
M12 / L = 71 4 nf brass 20...250 IP67 25 250 12 IF0007*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 12
M18 / L = 80 5 f PBT 20...250 IP67 25 / 50 350 / 100 16 IG0005*
M18 / L = 80 5 f brass 20...250 IP67 25 / 50 350 / 100 16 IG0011*
M18 / L = 80 8 nf PBT 20...250 IP67 25 / 50 350 / 100 16 IG0006*
M18 / L = 80 8 nf brass 20...250 IP67 25 / 50 350 / 100 18 IG0012*
Ø 20 / L = 77 10 nf PBT 20...250 IP67 25 / 70 350 / 100 28 IA0004*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 13
Ø 20 / L = 77 10 nf PBT 20...250 IP67 25 / 70 350 / 100 28 IA0027*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 14
Ø 20 / L = 92 10 nf PBT 20...250 IP65 25 / 70 350 / 100 29 IA0032*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 12
M30 / L = 81 10 f PBT 20...250 IP67 25 / 50 350 / 100 22 II0005*
Inductive sensors
33You can find wiring diagrams from page 43
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 12
M30 / L = 81 10 f brass 20...250 IP67 25 / 50 350 / 100 22 II0011*
M30 / L = 81 15 nf PBT 20...250 IP67 25 / 50 350 / 100 22 II0006*
M30 / L = 81 15 nf brass 20...250 IP67 25 / 50 350 / 100 23 II0012*
Ø 34 / L = 82 20 nf PBT 20...250 IP67 25 / 50 350 / 100 30 IB0004*
Ø 34 / L = 82 30 nf PBT 20...250 IP67 25 / 50 350 / 100 30 IB0026*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 13
Ø 34 / L = 82 20 nf PBT 20...250 IP67 25 / 50 350 / 100 30 IB0017*
Ø 34 / L = 82 30 nf PBT 20...250 IP67 25 / 50 350 / 100 30 IB0027*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 14
Ø 34 / L = 98 20 nf PBT 20...250 IP65 25 / 50 350 / 100 31 IB0016*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 12
40 x 12 x 26 2 f PBT 20...250 IP67 25 / 50 350 / 100 34 IN0073*
40 x 12 x 26 4 nf PBT 20...250 IP67 25 / 50 350 / 100 34 IN0081*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 13
40 x 12 x 26 2 f PBT 20...250 IP67 25 / 50 350 / 100 34 IN0077*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 14
40 x 40 x 120 15 f PPE 20...250 IP65 20 / 55 350 / 100 38 IM0011*
Inductive sensors
34Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 14
40 x 40 x 120 20 nf PPE 20...250 IP65 20 / 55 350 / 100 38 IM0010*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 30
90 x 60 x 40 40 nf PPE 20...250 IP65 10 350 / 100 41 IC0003*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 12
120 x 80 x 30 50 nf modified PPE 20...250 IP65 25 / 35 350 / 100 43 ID0014*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 30
105 x 80 x 40 60 nf modified PPE 20...250 IP65 4 350 / 100 42 ID0013*
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Sensors for hygienic and wet areas with increased sensing range
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group 12
M12 / L = 50 7 nf high-grade st. steel 10...36 IP68 / IP69K 800 100 49 IFT200
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 15 · Connector group 12
M12 / L = 45 4 f high-grade st. steel 10...36 IP68 / IP69K 800 100 50 IFT204
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 26 · Connector group 12
M12 / L = 70 4 f high-grade st. steel 10...36 IP68 / IP69K 500 100 51 IFT205
Inductive sensors
35You can find wiring diagrams from page 43
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M12 / L = 61 7 nf high-grade st. steel 10...36 IP68 / IP69K 800 100 52 IFT208
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group 12
M18 / L = 46 8 f high-grade st. steel 10...36 IP68 / IP69K 600 100 53 IGT203
M18 / L = 51 12 nf high-grade st. steel 10...36 IP68 / IP69K 300 100 54 IGT200
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 15 · Connector group 12
M18 / L = 46 8 f high-grade st. steel 10...36 IP68 / IP69K 600 100 53 IGT204
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 26 · Connector group 12
M18 / L = 70 8 f high-grade st. steel 10...30 IP68 / IP69K 400 100 55 IGT205
Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M18 / L = 57 8 f high-grade st. steel 10...36 IP68 / IP69K 600 100 56 IGT206
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group 12
M30 / L = 50 14 f high-grade st. steel 10...36 IP68 / IP69K 50 100 57 IIT205
Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M30 / L = 59 14 f high-grade st. steel 10...36 IP68 / IP69K 100 100 58 IIT209
f = flush / nf = non flush
Inductive sensors
36Product selectors and further information can be found at: www.ifm.com
Sensors for hygienic and wet areas
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group 12
M12 / L = 44 4 nf high-grade st. steel 10...36 IP67 1400 150 59 IF5796
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 6 · Connector group 12
M18 / L = 45 10 nf high-grade st. steel 10...36 IP67 300 250 60 IG5846
f = flush / nf = non flush
Sensors for oils and coolants with increased sensing range
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M8 / L = 50 2 f high-grade st. steel 10...36 IP67 1000 200 61 IE5381
M12 / L = 45 4 f brass 10...36 IP68 700 100 50 IFC204
M12 / L = 45 4 f brass 10...36 IP68 700 100 50 IFC206
M12 / L = 60 4 f brass 10...36 IP68 700 200 62 IFC229
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 15 · Connector groups 2, 3, 4, 5
M12 / L = 45 4 f brass 10...36 IP68 700 100 50 IFC207
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 31 · Connector groups 2, 4
M12 / L = 45 4 f brass 10...30 IP68 700 100 50 IFC202
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M12 / L = 50 7 nf brass 10...36 IP68 700 100 63 IFC205
Inductive sensors
37You can find wiring diagrams from page 43
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M18 / L = 46 8 f brass 10...36 IP68 400 100 53 IGC204
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 31 · Connector groups 2, 4
M18 / L = 46 8 f brass 10...30 IP68 300 100 53 IGC202
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 26 · Connector groups 2, 3, 4, 5
M18 / L = 70 8 f brass 10...30 IP68 400 100 64 IGC210
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M30 / L = 50 15 f brass 10...36 IP68 100 100 57 IIC200
f = flush / nf = non flush
Sensors for oils and coolants with ceramic sensing face
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M12 / L = 45 4 f brass 10...36 IP68 700 100 50 IFC206
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 26 · Connector groups 2, 3, 4, 5
M18 / L = 70 8 f brass 10...30 IP68 400 100 64 IGC210
f = flush / nf = non flush
Inductive sensors
38Product selectors and further information can be found at: www.ifm.com
Sensors for oils and coolants, AS-i system
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · 2-wire · AS-i · Wiring diagram no. 7 · Connector groups 2, 4
M30 / L = 60 22 nf high-grade st. steel 26.5...31.6 IP68 100 – 65 IIC221
f = flush / nf = non flush
Full metal sensors with non-stick coating against weld spatter
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2
M8 / L = 60 2 fstainless steel 316L /
1.440410...36 IP67 / IP68 100 100 66 IER200
M12 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 16
M8 / L = 60 2 fstainless steel 316L /
1.440410...36 IP67 / IP68 100 100 66 IER201
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2
M12 / L = 60 4 f high-grade st. steel 10...36 IP67 2 100 62 IFR200
M12 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 16
M12 / L = 60 4 f high-grade st. steel 10...36 IP67 2 100 62 IFR202
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2
M18 / L = 70 6 f high-grade st. steel 10...36 IP67 2 100 19 IGR200
M12 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 16
M18 / L = 70 6 f high-grade st. steel 10...36 IP67 2 100 19 IGR202
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2
M30 / L = 70 12 f high-grade st. steel 10...36 IP67 2 100 67 IIR200
Inductive sensors
39You can find wiring diagrams from page 43
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 16
M30 / L = 70 12 f high-grade st. steel 10...36 IP67 2 100 67 IIR202
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 17
M8 / L = 45 2 f high-grade st. steel 10...36 IP67 150 100 68 IER203
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 18
M8 / L = 45 2 f high-grade st. steel 10...36 IP67 150 100 68 IER206
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 17
M12 / L = 40 4 f high-grade st. steel 10...36 IP67 75 100 69 IFR203
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 19
M12 / L = 40 4 f high-grade st. steel 10...36 IP67 75 100 69 IFR206
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 17
M18 / L = 40 6 f high-grade st. steel 10...36 IP67 50 100 70 IGR203
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 19
M18 / L = 40 6 f high-grade st. steel 10...36 IP67 50 100 70 IGR206
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 17
M30 / L = 40 12 f high-grade st. steel 10...36 IP67 25 100 71 IIR203
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 19
M30 / L = 40 12 f high-grade st. steel 10...36 IP67 25 100 71 IIR206
Cable 3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 20
M8 / L = 45 2 f high-grade st. steel 10...36 IP67 150 100 72 IER204
Inductive sensors
40Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 21
M12 / L = 40 4 f high-grade st. steel 10...36 IP67 75 100 73 IFR204
M18 / L = 40 6 f high-grade st. steel 10...36 IP67 50 100 74 IGR204
M30 / L = 40 12 f high-grade st. steel 10...36 IP67 25 100 75 IIR204
Cable 5 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 20
M8 / L = 45 2 f high-grade st. steel 10...36 IP67 150 100 72 IER205
Cable 5 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 21
M12 / L = 40 4 f high-grade st. steel 10...36 IP67 75 100 73 IFR205
M18 / L = 40 6 f high-grade st. steel 10...36 IP67 50 100 74 IGR205
M30 / L = 40 12 f high-grade st. steel 10...36 IP67 25 100 75 IIR205
f = flush / nf = non flush
Electromagnetic field immune sensors with correction factor K = 1
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2
M12 / L = 65 3 f brass 10...30 IP67 4000 200 76 IFW200
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M18 / L = 65 5 f brass 10...30 IP67 2000 200 77 IGW200
Inductive sensors
41You can find wiring diagrams from page 43
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M30 / L = 65 10 f brass 10...30 IP67 1000 200 78 IIW200
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 6 · Connector groups 2, 4, 5
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 37 IM5132
f = flush / nf = non flush
Electromagnetic field immune sensors
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2
M12 / L = 60 2 f brass 10...36 IP67 1000 250 79 IF5750
f = flush / nf = non flush
Safety relays with relay outputs for fail-safe sensors
Type Description Orderno.
Safety relay · Relay outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safesensors/switches and for use as two-hand control · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC61508) · Type IIIC (EN 574)
G1501S
Sensors with ATEX approval 1D / 2G
Type Dimensions
[mm]
Sensingrange
[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 22
M18 / L = 33 8 nf PBT 8.2 DC 7.5...30 155 50 300 80 NG5003
Inductive sensors
42Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 22
M30 / L = 41 10 f brass 8.2 DC 7.5...30 145 140 450 81 NI5002
f = flush / nf = non flush
Sensors with ATEX approval 1D / 1G / 2G
Type Dimensions
[mm]
Sensingrange
[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
M12 connector · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V /I = 50 mA / P = 120 mW · Wiring diagram no. 23 · Connector group 13
40 x 40 x 66 20 f PPE 8.2 DC 7.5...30 250 450 200 82 NM500A
f = flush / nf = non flush
Switching amplifiers with ATEX approval
Type Description Orderno.
Amplifier · NV1121/24VDC/RL/1D/1G · ATEX approval · Group II, category (1) G D · 1-channel · Relay output · Programmable outputfunction · Short-circuit and wire monitoring
N0530A
Accessories for sensors with smooth sleeve
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PA E10193
Core colours
BN brown
BU blue
BK black
WH white
Wiring diagrams
1
BN
BK
BU
L+
L
2
L+
L
1
4
3
3
L+
L
1
4
3
Inductive sensors
43
Wiring diagrams
4
/L+
L
13
/2 4
5
BN
BK
BU
L+
L
6
4
L
L+1
2
32:4:
7
AS-i+1
3 AS-i
8
L
L+
4
2
1
32:4:
9
L+
L
1
4
3
10
L+
L
1
4
3
11
BN
BU
L1
N
12
BN
BU
L+L1
LN
13
BN
BU
L+L1
LN
14
/1 3
/2 4
L1L+
LN
15
L+
L
1
2
3
16
L+
L
1
4
3
17
L+
L
1
4
18
3
4 L
LL+
L+
19
L+
L
4
3
20
L
BN
BU
L+
21
BN
BU
L+
L
22
+BN
BU
23
L+
L2
1
1
52
1: connection to NAMUR-amplifier, 2: Potential equali-sation plug housing
24
WH
BK
L+
L L
BK
WH
L+
25
L+
L
BN
BK
BU
L+
L
BN
BK
Inductive sensors
44Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
26
L+
L
1
4
L+
L
1
4
3
27
L+
L1
4L+
L
1
4
28
L+
L
/1 3
/2 4
L+
L/1 3
/2 4
29
2
4
3
1
5
L+
L
2
4
3
1
5
L+
L
30
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
DC PNP
L+
L
2
4
3
1
5
DC PNP
L+
L
31
L+
L
4
3PNP
L+
L
1
4
3NPN
Scale drawings / drawing no. – CAD download: www.ifm.com
1
8LED
20
2530
M5
x0,
5
2,7
2
LED 4 x 90° 8
22
45
M5
x0,
5
2,7
M8
x1
36
3
3942
50
LED
M8
x1
413
4
35
LED
M8
x1
413
2
5
27
LED
M8
x1
413
82
6
38,542,5
M8
x1
4
13
M8
x1
LED 4 x 90°
50
Inductive sensors
45
Scale drawings / drawing no. – CAD download: www.ifm.com
7
39
M8
x1
LED 4 x 90°
4
13
M8
x142
50
8
4
13
28,5
40
M8
x1
LED 4 x 90°
M8
x1
32,5
9
M8
x1
4
13
M12
x1
6250
40
LED 4 x 90°
10
9
18 7160
50
M12
x1
LED 174
11
4
3524
M12
x1
4LED
17
9
18
12
9
18 716046
M12
x1
LED 174
4
13
M12
x1
7460
51
M12
x1
LED 174
83
14
83
6047
M12
x1
LED 174
4
M12
x1
74
15
3827
M18
x1
4LED 24
9
18
16
24LED
801869
58
M18
x1
49
17
9
18
M18
x1
4LED 24
3827
8
18
24LED
80186950
M18
x1
4
9
8
19
5957
50
M18
x1
4
M12
x1
70
24LED 4 x 90°
20
24
675542
M18
x1
4LED
8
M12
x1
76
Inductive sensors
46Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
21
79
24
50
M18
x1
4
110
20
30
81LED
22
36
8167
59
5
M30
x1,5
9
18
LED
23
8167
5
1544
36
M30
x1,5
9
18
LED
24
4531
5
M30
x1,5
36LED
9
18
25
15
36
6853
35
5LED
M30
x1,5
M12
x1
78
26
LED
6,5
3527
27
3022,5
LED 4 x 90°
M8
x1 6,5
28
9
18
20
7766
55
LED
29
62
9263
30
LED
20
30
9
18
LED34
8272
60
31
9870LED
34
38
60
32
10,2
27,8
LED
5,6
165,1
22,2
2,75
3,1
3,5
2,83,1
LED
10,4
Inductive sensors
47
Scale drawings / drawing no. – CAD download: www.ifm.com
33
10,227
,8
LED
5,6
M8x1
36,8
16
22,2
2,75
3,1
3,5
2,83,1
10,4
M8x1
LED
34
40
6
12
LED
4
2613
32
3,2 4
5
LED
3,2
18
1610
1
1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2Nm (screw fixing class 8.8) when brass insert in contact with counter-part.
35
4
5
18
M8x1
9
6
LED
1
12
40
3,2 32
4
13
LED26
3,2
1016
1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2Nm (screw fixing class 8.8) when brass insert in contact with counter-part.
36
LED10
4
20
12
4
60
36
16
3,2 28
3,2159
24
4,2
37
40
66
40
54
M12
x130
30 2
2
1
46
46
5,5
5,5
29,5
1: LED yellow, 2: LED green
38
40
10,4
45,6
LED
32
5,3
30
61,5
77
5,1
121101
LED
27
39
40
13
7,35,3
46
30
60
LED58
5,3
40118
LED
Inductive sensors
48Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
40
7,35,3
46
LED
3060
137
LED58
5,3
40118
LED29
40
41
90
30
45
7,545
9,35,5
60
16
LEDpot.
4012
8
16
42
105
80
40
7,565
65
5,59,3 40
12
27
18
LED
pot.
16
43
120
45
8060
10100
69,5
4021
3015
pot.
LED
44
11
1015
42,5
60
5
M12 x1
2635
4,5
10,1
4,5
4
1510
68
20
1: Sensitivity, 2: Output function, 3: Pulse stretching time
45
11
1015
42,5
60
5
M12 x1
2635
4,5
15,1
4,5
4
1510
68
20
1: Sensitivity, 2: Output function, 3: Pulse stretching time
46
11
1015
42,5
60
5
M12 x1
2635
4,5
20,1
4,5
4
1510
68
20
1: Sensitivity, 2: Output function, 3: Pulse stretching time
47
11
1015
42,5
60
5
M12 x1
2635
4,5
25,1
4,5
4
1510
68
20
1: Sensitivity, 2: Output function, 3: Pulse stretching time
Inductive sensors
49
Scale drawings / drawing no. – CAD download: www.ifm.com
48
11070
4,5 51
7080
M12
x1
LED
205
49
32
M12
x1
17
4
5
M12
x1
3950
LED 4 x 90°
50
453432
M12
x1
174
M12
x1
LED 4 x 90°
51
LED 4 x 90°
5970
50
M12
x1
174
M12
x1
52
5
614428
M12
x1
LED 4 x 90° 17
4
5
53
M18
x1
M12
x1
3033
4635
424LED 4 x 90°
54
M18
x1
M12
x1
2538
5140
424
10
LED 4 x 90°
55
M18
x1
M12
x1
5057
7059
424LED 4 x 90°
56
57
39,5
29
33
LED4 x 90°
M18
x1
424
5
57
39
33
M30
x1,5
37
50
M12
x1
LED 4 x 90° 5 36
58
31
M30
x1,5
35
5
42
LED 4 x 90°
59
365
59
17
4
4425
M12
x1
4LED
Inductive sensors
50Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
60
M18
x1
M12
x1
3233
45
LED 4 x 90°
8
424
61
M12
x1
5039
25
LED 4 x 90° 13
4
M8
x1
62
4940
M12
x1
174
M12
x1
LED 4 x 90°
60
63
32
M12
x1
17
4
5
M12
x1
3950
LED 4 x 90°
64
M18
x1
M12
x1
49
56,5
70
59
424LED 4 x 90°
65
49
28
M30
x1,5
5
47
60
M12
x1
LED 4 x 90°
15
36
66
M8
x1
4
13
M12
x1
6049
33
LED 4 x 90°
67
58
50
M30
x1,5
5
57
70
36
M12
x1
LED 4 x 90°
68
M12
x1
14
≤ 49,3
LED
M8
x1
4535
74
13
69M
12x1
14
49
M12
x1
4
LED
11 17
4030
70
M12
x1
14
49
LED
17
M18
x1
4
24
4030
Inductive sensors
51
Scale drawings / drawing no. – CAD download: www.ifm.com
71
M12
x1
14
49
40
536
LED
M30
x1,5
30
28
72
LED
M8
x1
4535
74
13
73
M12
x1
4
LED
11 17
4030
74
LED
17
M18
x1
4
24
4030
75
40
536
LED
M30
x1,5
30
28
76
54
52
M12
x1
4
M12
x1
LED 4 x 90°
65
17
77
M18
x1
4LED 4 x 90° 24
M12
x1
5254
65
45
78
53
49
M30
x1,5
5
52
65
M12
x1
LED 4 x 90° 36
79
4840
M12
x1
174
M12
x1
5160
LED 4 x 90°
80
33M
18x1
4
2
24
81
2 41
5
M30
x1,5
36
82
40
M12
x1
4066
17
34
LED
4661
30 20
5,4
105,
4 6
16
33
Inductive sensors
52Product selectors and further information can be found at: www.ifm.com
Inductive sensors
53
High operational reliability due to increased noise immunity.
Sensing range adjustable by means of a potentiometer or pushbutton.
Plastic or metal housing for different applications.
Variable: connector, connection cable or connection terminals.
Assortment of tank and sight glassmounting acccessories.
Capacitive sensors
Capacitive sensors are used for the non-contact detection of any objects. In contrastto inductive sensors, which only detect metallic objects, capacitive sensors can alsodetect non-metallic materials. Typical applications are in the wood, paper, glass,plastic, food and chemical industries. In a packaging system, capacitive sensorsmonitor that the contents of a cardboard box is complete, for example, or checkthe presence of non-metallic caps. Another application is to monitor the conveyingof sheets of glass on a roller conveyor.
Operating principle
The capacitance between the active electrode of the sensor and the electrical earthpotential is evaluated. An approaching object influences the electrical alternatingfield between these two “capacitor plates” and, consequently, the capacitance. Thisapplies to metallic and non-metallic objects. By means of the potentiometer or thepushbutton the user can set the sensitivity.
Increased noise immunity
When detecting objects, very small changes in capacitance must be evaluated andconverted into switching signals. This makes high requirements for the electronics.The sensors must be designed so that they are insensitive to fluctuations of theparasitic basic capacitances, as these can amount to a multiple of the change incapacitance to be measured. Moreover, the sensors must be insensitive to electro-magnetic interference which typically occurs in the application area.
ifm electronic has developed future-oriented solutions to meet the high sensorrequirements. A patented circuit concept efficiently prevents the mentionedproblems and ensures reliable functioning for all relevant noise parameters.
Not only metal: Capacitive sensorsdetect almost allmaterials, herefor example a login a saw mill.
Capacitive sensors
54Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Sensors for industrial applications, DC 56 - 57
Sensors for industrial applications, AC and AC/DC 57 - 58
Sensors for the detection of conductive media through a wall 58
Sensors for the detection of granulates for the plastics industry, DC 58
Sensors with ATEX approval 59
Switching amplifiers with ATEX approval 59
Accessories mounting components 59
Wiring diagrams 60 - 61
Scale drawings / drawing no. – CAD download: www.ifm.com 61 - 63
Capacitive sensors
55
Sensors for industrial applications, DC
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
M18 / L = 84 8 nf PBT 10...36 IP67 50 250 1 KG5043
Cable 2 m · Output function · DC PNP/NPN · Wiring diagram no. 10
M18 / L = 84 8 nf PBT 10...55 IP67 50 400 1 KG5047
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4
M12 / L = 60 4 f high-grade st. steel 10...36 IP65 50 100 2 KF5001
Terminals · Output function · DC PNP/NPN · Wiring diagram no. 11
M18 / L = 110 8 nf PBT 10...55 IP65 50 400 3 KG5040
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
M30 / L = 81 15 nf PBT 10...36 IP65 40 250 4 KI5002
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M30 / L = 90 8 f high-grade st. steel 10...36 IP65 / IP67 10 100 5 KI5085
M30 / L = 90 15 nf high-grade st. steel 10...36 IP65 / IP67 10 100 6 KI5087
M12 connector · Output function · DC PNP/NPN · Wiring diagram no. 12 · Connector groups 2, 3, 4, 5
M30 / L = 90 8 f high-grade st. steel 10...36 IP65 / IP67 10 100 5 KI5084
M30 / L = 90 15 nf high-grade st. steel 10...36 IP65 / IP67 10 100 6 KI5086
Terminals · Output function · DC PNP · Wiring diagram no. 3
M30 / L = 125 15 nf PBT 10...55 IP65 40 250 7 KI5023
Capacitive sensors
56Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
Ø 34 / L = 81 20 nf PBT 10...36 IP65 40 250 8 KB5004
120 x 80 x 30 60 nf modified PPO 10...36 IP65 10 250 9 KD5022
Terminals · Output function · DC PNP · Wiring diagram no. 13
105 x 80 x 40 60 nf modified PPO 10...36 IP65 10 250 10 KD5018
f = flush / nf = non flush
Sensors for industrial applications, AC and AC/DC
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · AC/DC · Wiring diagram no. 4
M30 / L = 81 15 nf PBT 20...250 IP65 25 / 40 250 4 KI0016*
Cable 2 m · Output function · AC/DC · Wiring diagram no. 5
M30 / L = 81 15 nf PBT 20...250 IP65 25 / 40 250 4 KI0020*
Terminals · Output function · AC/DC · Wiring diagram no. 6
M30 / L = 125 15 nf PBT 20...250 IP65 25 / 40 250 7 KI0024*
Cable 2 m · Output function · AC/DC · Wiring diagram no. 4
Ø 34 / L = 81 20 nf PBT 20...250 IP65 25 / 40 250 8 KB0025*
Cable 2 m · Output function · AC/DC · Wiring diagram no. 5
Ø 34 / L = 81 20 nf PBT 20...250 IP65 25 / 40 250 8 KB0029*
Capacitive sensors
57You can find wiring diagrams from page 60
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Terminals · Output function · AC/DC · Wiring diagram no. 14
105 x 80 x 40 60 nf modified PPO 20...250 IP65 10 250 10 KD0009*
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Sensors for the detection of conductive media through a wall
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · DC PNP · Wiring diagram no. 7
M18 / L = 77 8 nf PP 10...36 IP65 / IP67 10 200 11 KG5069
Cable 2 m · Output function · 1x open collector with automatic load detection (DC PNP or DC NPN) · Wiring diagramno. 15
20 x 14 x 48 12 nf PBT 10...36 IP65 / IP67 10 100 12 KQ6001
f = flush / nf = non flush
Sensors for the detection of granulates for the plastics industry, DC
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 16 · Connector groups 2, 4
M30 / L = 116 nf PPS 10...30 IP67 10 200 13 KN5121
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4, 5
M30 / L = 90 20 nf PBT 10...36 IP65 / IP67 10 200 14 KI5083
f = flush / nf = non flush
Capacitive sensors
58Product selectors and further information can be found at: www.ifm.com
Sensors with ATEX approval
Type Dimensions
[mm]
Sensingrange
[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 8
M30 / L = 81 15 nf PBT 8.2 DC 7.5...15 375 1 40 4 KI5030
Terminals · Output function · AC/DC · Wiring diagram no. 6
M30 / L = 151 15 nf PBT20...250AC/DC
– – – 25 / 50 15 KI0042*
Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 9
M34 / L = 92 15 nf brass 8.2 DC 7.5...15 375 1 40 16 KX5001
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting), Place the fuse outside the hazardous area. . Recommendation: checkthe unit for reliable function after a short circuit.
Switching amplifiers with ATEX approval
Type Ub
[V]
Power / currentconsumption
[VA] / [mA]
f
[Hz]
Ta
[°C]
Output Protection Draw-ingno.
Orderno.
24 / < 23 10 -20...60 relay (1 changeover contact) IP20 17 N0530A
Accessories mounting components
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PA E10193
Capacitive sensors
59You can find wiring diagrams from page 60
Core colours
BN brown
BU blue
BK black
WH white
GN/YE green/yellow
Wiring diagrams
1
BN
BK
BU
L+
L
2
L+
L
1
4
3
3
/L+
L
13
/2 4
4
BN
BU
L+L1
LN
5
BN
BU
L+L1
LN
6
/1 3
/2 4
L1L+
LN
7
BN
BK
BU
L+
L
8
+BN
BU
9
BN
GN/YE
BU+
10
WH
BK
L+
L L
BK
WH
L+
11
L+
L
/1 3
/2 4
L+
L/1 3
/2 4
12
L+
L
1
4
3
L+
L
1
4
3
13
2
4
3
1
5
L+
L
2
4
3
1
5
L+
L
14
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
DC PNP
L+
L
2
4
3
1
5
DC PNP
L+
L
15
L
L+BN
BK
BU L
L+BN
BK
BU
Capacitive sensors
60Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
16
L
L+
4
2
3
1
2
L
L+
4
1
3
2: function check output / programming wire
Scale drawings / drawing no. – CAD download: www.ifm.com
1
24
58
4
84
M18
x1
pot.LED LEDpot.
2
40,2
38,2
M12
x1
M12
x1
59,8
1 2
1: LED 4 x 90°, 2: with pot.
3
80
24
67,250
M18
x1
4
110
20
30
81LED
17
1
1: with pot.
4
36
8159
5
M30
x1,5
9
18pot.LED
5
60
M30
x1,5
7790
LED (4 x 90°) 5
M12
x 1
361
1: Programming buttons
6
60
M30
x1,5
7790
LED (4 x 90°) 5
M12
x 1
361
15
1: Programming buttons
7
36
6454
5
M30
x1,5
95125
37
25
88
LED pot.
8
9
18
34
8160 LED pot.
Capacitive sensors
61
Scale drawings / drawing no. – CAD download: www.ifm.com
9
120
45
8060
10100
69,5
4021
3015
pot.
LED
10
105
80
40
7,565
65
5,59,3 40
12
27
18
LED
pot.
16
11
24
M18
x1
1 2
7756
88
6
1: LED ring, 2: Programming buttons
12
3,2
48
3343,7
2
5,5 3
13,4
14
20
121
1: Programming buttons, 2: sensing face
13
116
5
68 20
36
M30
x1,5
101
109
5
50
36
M30
x1,5
M12
x1
LED
120
100
1
1: Programming button
14
61
M30
x1,5
8090
5
M12
x 1
3621
1: LED ring, 2: Programming buttons
15
36
6454
5
M30
x1,5
95125
37
88
LED POTI
26
151
63
24
16
822040
M34
x1,5
10
541
LEDpot.
Capacitive sensors
62Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
17
11235
,520
120
LED
1
1: Combicon plug with screw terminals (optional)
Capacitive sensors
63
Detection also through non-magnetisable metals.
Small designs with very long sensing ranges up to 100 mm.
Cylinder and rectangular designs for demanding applications.
Wide temperature range for universal use.
Flush or non-flush installation innon-magnetisable metals.
Magnetic sensors
Magnetic sensors are used for the detection of positions without contact or wearand tear in control technology. They are used where inductive sensors reach theirlimits. The advantage: Compared to inductive sensors magnetic sensors have aconsiderably higher sensing range and smaller housings.
Since magnetic fields penetrate all non-magnetisable materials, the sensors candetect magnets through walls made of non-ferrous metal, stainless steel,aluminium, plastic or wood.
In gate systems, for example, the magnet sensor only detects the magnet which isto be detected. Any possible influences by aluminium in the environment do notimpact the sensor.
In the food industry the magnetic sensor is often used in connection with pigs(cleaning devices which pass through the inside of pipes). By means of magneticsensors their exact position can be detected from the outside through the wall ofthe stainless steel pipe.
Operating principle
Magnetic sensors from ifm electronic use state-of-the-art GMR (Giant MagnetoResistive Effect) technology. The measuring cell consists of resistors with severalextremely fine, ferromagnetic and non-magnetic layers. Whereas in a conventionalWheatstone bridge circuit two screened and two unscreened GMR resistors arecombined, a large signal proportional to the magnetic field is produced if a mag-netic field is present. As from a defined threshold value an output signal is switchedvia a comparator.
Installation
Magnetic sensors can be mounted flush with all materials (even metals) withoutreduction in the sensing range. Depending on the orientation of the magnetic fieldthe sensor can be damped from the front or from the side.
The sensor switchesas soon as themagnet has reachedthe switch-on point.The direction ofmovement of themagnet is notimportant.
Magnetic sensors
64Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Sensors for industrial applications 66
Wiring diagrams 66
Scale drawings / drawing no. – CAD download: www.ifm.com 66
Magnetic sensors
65
Sensors for industrial applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
M12 / L = 50 60 stainless steel 10...30 IP67 5000 200 1 MFS201
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 2, 4
M18 / L = 60 70 stainless steel 10...30 IP67 5000 200 2 MGS200
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
M18 / L = 50 70 stainless steel 10...30 IP67 5000 200 3 MGS201
Core colours
BK black
BN brown
BU blue
Wiring diagrams
1
BN
BK
BU
L+
L
2
L+
L
1
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
5029
M12
x1
4LED
17
2
24
4947
40
M18
x1
4
M12
x1
60
LED 4 x 90°
3
24
504340
M18
x1
2LED
4
Magnetic sensors
66Product selectors and further information can be found at: www.ifm.com
Magnetic sensors
67
Self-clamping fixture for easy adjustment and quick mounting.
Convenient: can be easily inserted into the slot from the top.
Suitable for almost all C and T slots.
Unit versions available with connection cable and M8 / M12 cable plug.
Wide selection of adapter accessories.
Cylinder sensors
Cylinder sensors are used for position detection of pistons in pneumatic cylinders.They are directly mounted onto the cylinder. The ring magnet attached to thepiston is sensed through the housing wall of non-magnetisable material(e.g. aluminium, brass or stainless steel). ifm electronic offers a standard solution fordifferent cylinder types and manufacturers.
Operating principle
ifm electronic‘s cylinder sensors use state-of-the-art GMR and AMR technology: AGMR element is made up of extremely thin magnetic layers, each separated by anonmagnetic layer. Without external field they align in an antiparallel manner whichresults in a defined electrical resistance. If these layers are exposed to a magneticfield, the magnetic layers align in a parallel manner. This results in a large change inresistance that is converted into a switching signal by the internal electronics.
An AMR element consists of thin ferromagnetic stripes. Electrical resistance ishighest without external magnetic fields. The effect of a magnetic field reducesresistance. This change is converted into a switching signal by the internalelectronics. Advantage: This method enables exact measurement of even very smallchanges of the magnetic field where space is extremely limited. This results in asmaller hysteresis and a short travel distance. So, the sensors can be used whereverexact positioning is required (e.g. short-stroke cylinder).
Response sensitivity
The response sensitivity applies equally to either magnetic polarity and withoutexternal field influence. The magnetic flux density in most pneumatic cylinders isbetween 5 and 25 millitesla (mT). ifm electronic’s cylinder sensors are factory set sothat they detect these magnetic fields safely.
Travel distance
The travel distance describes the section which is covered by the magnet in thesensing zone. It depends on the strength of the magnet. The short response timesof the sensors allow very high travel speeds.
Position sensing:Cylinder sensorsmonitor the positionof the piston in apneumatic cylinder.
Cylinder sensors
68Product selectors and further information can be found at: www.ifm.com
Selection chart Page
T-slot sensors for industrial applications 70
T-slot sensors for short-stroke cylinders 70
Fixing straps for clean line cylinders 70
Adapters for tie rod and integrated profile 71
Adapters for trapezoidal slot cylinders 71
Wiring diagrams 71
Scale drawings / drawing no. – CAD download: www.ifm.com 71
Cylinder sensors
69
T-slot sensors for industrial applications
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 1 MK5100
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 2
25 x 5 x 6.5 PA (polyamide) 10...30 4000 IP67 100 -25...85 1 MK5103
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 2 MK5101
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 4
25 x 5 x 6.5 PA (polyamide) 10...30 4000 IP67 100 -25...85 2 MK5104
T-slot sensors for short-stroke cylinders
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
25 x 5 x 6.5 PA (polyamide) 10...30 > 6000 IP67 100 -25...85 3 MK5140
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3 · Connector groups 2, 3, 4, 5
25 x 5 x 6.5 PA (polyamide) 10...30 > 6000 IP67 100 -25...85 4 MK5139
Fixing straps for clean line cylinders
Type Description Orderno.
Fixing strap for clean-line cylinders · Piston diameter · Ø 50 mm · Piston diameter 50 mm · for type MKT · Housing materials:adapter: PA / Fixing strap: stainless steel
E11820
Cylinder sensors
70Product selectors and further information can be found at: www.ifm.com
Adapters for tie rod and integrated profile
Type Description Orderno.
Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 9...15 mm · Housingmaterials: aluminium / screw: stainless steel
E11799
Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 14...20 mm · Housingmaterials: aluminium / screw: stainless steel
E11801
Adapters for trapezoidal slot cylinders
Type Description Orderno.
Adapter for trapezoidal slot cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: aluminium alloy / set screw:stainless steel
E11796
Core colours
BK black
BN brown
BU blue
Wiring diagrams
1
BN
BK
BU
L+
L
2
L
BN
BU
L+
3
L+
L
1
4
3
4
L+
L
1
4
Scale drawings / drawing no. – CAD download: www.ifm.com
1
5
2
6,2
5,7
25,3
5,1
6,5
LED
1: Fastening clamp, 2: sensing face
2
L
M8
x1
37
5
2
6,2
5,7
25,3
5,1
6,5
LED
1: Fastening clamp, 2: sensing face
Cylinder sensors
71
Scale drawings / drawing no. – CAD download: www.ifm.com
3
5
12
5,7
25,3
5,1
6,5
LED
2
1: Fastening clamp, 2: sensing face
4
L
M12
x1
55
5
12
5,7
25,3
5,1
6,5
LED
2
1: Fastening clamp, 2: sensing face
Cylinder sensors
72Product selectors and further information can be found at: www.ifm.com
Cylinder sensors
73
Dual inductive feedback sensors forvalves and actuators.
Straightforward fit to standard actuatorsbased on VDI / VDE 3845.
AS-i dual sensor for quick and safe installation due to “plug & play”.
Compact, weatherproof andlow maintenance.
Also available as complete set includingall the accessories for a valve.
Valve sensors
In industrial processes where liquids, air or gases are used valves are needed fordosing and control. There is a wide variety of valve types; butterfly or ball valvesbeing the most common quarter-turn types.
These valves are seldom operated manually. Pneumatic valve actuators are normallyused for mechanical positioning. The valve position must be monitored electronical-ly. On the one hand to provide a feedback to the controller when a certain position(e.g. “open” or “closed”) is reached. On the other hand it is necessary to monitorthe valves centrally.
Mechanical switches are still often used for position feedback on the actuator shaft.For other solutions several inductive sensors are used together with a switch targetfor position detection. Disadvantage: Mounting is mechanically complex. Wherethere are temperature fluctuations condensing humidity leads to corrosion and thusmalfunction.
Operating principle
An innovative design eliminates the disadvantages of these conventional solutions.In 1992 ifm electronic developed a standard which is now used by many leadingactuator manufacturers. A round switch target, known as a “puck”, with two metalscrews offset by 90° is mounted on the actuator shaft. The screws are located at adifferent height. A compact dual inductive sensor (type IND) with two integral sen-sors detects the upper or lower metal screw depending on the valve position andthus the two switch positions.
Advantages
Due to the simple construction the system operates safely with no wear at all. It isvirtually resistant to external influence and meets the protection rating IP 67. Undercertain conditions the unit can even be self-cleaning. Compared to conventionalsolutions the sensor weight is low. The sensors are also resistant to mechanicalstress such as vibration and shock.
Feedback: Monitoringof pneumatic and
manual valves mustbe possible.
Valve sensors
74Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Sensors for industrial applications 76
Wiring diagrams 76
Scale drawings / drawing no. – CAD download: www.ifm.com 76
Valve sensors
75
Sensors for industrial applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP/NPN · Wiring diagram no. 1 · Connector groups 2, 4
40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 1 IN5224
f = flush / nf = non flush
Wiring diagrams
1
L
L+
L+
L
2:1: A1
A2
2 WH
1 BN
4 BK
3 BUL
L+
L+
L
3:4: A1
A2
2 WH
1 BN
4 BK
3 BU
NPNPNP
Scale drawings / drawing no. – CAD download: www.ifm.com
1
40
2613
M12
x1
8,526
4,5
5,5
30
40
9
LED
A1
A2 6,5
LED
Valve sensors
76Product selectors and further information can be found at: www.ifm.com
Valve sensors
77
Photoelectric sensors
78Product selectors and further information can be found at: www.ifm.com
Photoelectric sensors
79
Infrared / red lightsensors
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
80 - 8182 - 93
9394 - 98
Laser sensors
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
101102 - 103
103103 - 104
Distance detection
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
107108108108
For specific systems
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
110 - 111112 - 114
114115 - 116
Safety light curtains / light grids
System description / System overviewProduct selection chartScale drawings / drawing no. – CAD download: www.ifm.com
118 - 119120120
Visible red light for easy adjustment.
Versions for use in hygienic and wet areas.
LED display to check operation,switching status and function.
Quick set-up due to easy teaching.
Extensive range of system componentsfor easy and safe mounting.
Photoelectric sensors
Automation technology can no longer be imagined without photoelectric sensors as“artificial eyes”. They are used where safe and non-contact detection of the exactposition of objects is required. The material of the objects to be detected is of noimportance. Compared to inductive sensors photoelectric sensors have a muchhigher sensing zone.
Through-beam sensors
A through-beam sensor is distinguished by a long range. The system consists of twoseparate components: a transmitter and a receiver. The light only travels one way(from the transmitter to the receiver). Adverse effects in the applications, such asdust in the air, dirt on the lenses, steam or mist do not immediately interfere withthe system (high excess gain).
Retro-reflective sensors
For a retro-reflective sensor the transmitter and receiver are incorporated into onehousing. By means of a reflector the transmitted light is returned to the receiver.
Diffuse reflection sensors
A diffuse reflection sensor is used for the direct detection of objects. Transmitterand receiver are incorporated into one housing. The transmitter emits light whichis reflected by the object to be detected and seen by the receiver. This systemevaluates the reflected light of an object.
Therefore additional components (e.g. reflectors for retro-reflective sensors) are notnecessary to operate a diffuse reflection sensor.
Fixing options
ifm electronic offers a complete component system of easy-to-use mounting setsthat make installation easier for you. The solutions consist of a clamp which isfastened with only one screw, keeps the sensors safely in place and at the sametime guarantees free movement in all axes.
The reflector reflectsthe light beam: For aretro-reflective sensortransmitter and re-ceiver are integratedinto one housing.
Artificial eyes: Photo-electric sensors are
used to detect posi-tions in automation
technology.
Photoelectric sensors
80Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Cylindrical OF housing (M12) BasicLine 82
Cylindrical housing OG (M18) BasicLine 82 - 84
Cylindrical housing OG (M18) PerformanceLine 84 - 85
Cylindrical housing OG (M18) BasicLine with lateral sensing face 85
Cylindrical housing OG (M18) WetLine for hygienic and wet areas 85 - 87
OG housing (M18), rectangular 87 - 88
Rectangular housing OJ BasicLine, lateral sensing face 88 - 89
Rectangular housing OJ PerformanceLine, lateral sensing face 89 - 90
Rectangular housing OJ PerformanceLine, front sensing face 90
Rectangular housing O5 BasicLine 90 - 91
Rectangular housing O5 PerformanceLine 91 - 92
Rectangular housing O5 PerformanceLine with ATEX approval 3D 92
Prismatic reflectors, reflective tape and fixing components 92
Accessories O5 housing 92
Wiring diagrams 93
Scale drawings / drawing no. – CAD download: www.ifm.com 94
Infrared / red lightsensors
81
Cylindrical OF housing (M12) BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...36 DC · metal · IP65 · Connector groups 2, 3, 4
Retro-reflective sensor 0.05...2 m infrared 140 H/D PNP 16 1 OF5016
Diffuse reflection sensor · M12 connector · 10...36 DC · metal · IP65 · Connector groups 2, 3, 4
Diffuse reflection sensor 1...400 mm infrared 185 H/D PNP 16 1 OF5027
Cylindrical housing OG (M18) BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...30 DC · plastics · IP67 · Connector groups 2, 4
Transmitter 8 m red 600 – 1 2 OGS100
Through-beam sensor · M12 connector · 10...30 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Receiver 8 m red – D PNP 2 2 OGE100
Receiver 8 m red – H PNP 3 2 OGE101
Receiver 8 m red – D NPN 4 2 OGE102
Receiver 8 m red – H NPN 4 2 OGE103
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 2, 4
Transmitter 20 m red 800 – 1 3 OGS200
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 2, 3, 4, 5
Receiver 20 m red – D PNP 2 3 OGE200
Receiver 20 m red – H PNP 3 3 OGE201
Photoelectric sensors
82Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...30 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Polarisation filter 0.05...2.5 m red 200 D PNP 2 2 OGP100
Polarisation filter 0.05...2.5 m red 200 H PNP 3 2 OGP101
Polarisation filter 0.05...2.5 m red 200 D NPN 4 2 OGP102
Polarisation filter 0.05...2.5 m red 200 H NPN 4 2 OGP103
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 2, 3, 4, 5
Polarisation filter 0.03...4 m red 160 D PNP 2 3 OGP200
Polarisation filter 0.03...4 m red 160 H PNP 3 3 OGP201
Retro-reflective sensor · Cable 2 m · 20...250 AC/DC (47...63 Hz AC) · plastics · IP67
Polarisation filter 3 m red 262 H AC/DC 5 4 OG0043
Diffuse reflection sensor · M12 connector · 10...30 DC · plastics · IP65 · Connector groups 2, 3, 4, 5
Diffuse reflection sensor 10...400 mm red 25 H PNP 2 5 OGT100
Diffuse reflection sensor 10...400 mm red 25 D PNP 2 5 OGT101
Diffuse reflection sensor 10...400 mm red 25 H NPN 4 5 OGT102
Diffuse reflection sensor 10...400 mm red 25 D NPN 4 5 OGT103
Diffuse reflection sensor · M12 connector · 10...36 DC ¹) · high-grade stainless steel · IP65 · Connector groups 2, 3, 4, 5
Diffuse reflection sensor 2...600 mm red 50 H PNP 2 6 OGT200
Infrared / red lightsensors
83You can find wiring diagrams from page 93
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 · Connector groups 2, 3, 4, 5
Background suppression 15...250 mm red 15 H PNP 2 6 OGH200
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Cylindrical housing OG (M18) PerformanceLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · Cable 2 m · 10...36 DC · high-grade stainless steel · IP67
Transmitter 25 m red 1000 – 6 7 OGS501
Receiver 25 m red – H/D PNP 7 8 OGE502
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 2, 4
Transmitter 25 m red 1000 – 1 9 OGS500
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 2, 3, 4, 5
Receiver 25 m red – H/D PNP 2 10 OGE500
Retro-reflective sensor · Cable 2 m · 10...36 DC · high-grade stainless steel · IP67
Polarisation filter 0.03...5 m red 200 H/D PNP 7 8 OGP502
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 2, 3, 4, 5
Polarisation filter 0.03...5 m red 200 H/D PNP 2 10 OGP500
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 2, 4
Polarisation filter 0.03...5 m red 200 H/D NPN 4 10 OGP503
Photoelectric sensors
84Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · Cable 2 m · 10...36 DC · high-grade stainless steel · IP67
Background suppression 15...300 mm red 25 H/D PNP 7 8 OGH501
Diffuse reflection sensor · M12 connector · 10...36 DC ¹) · high-grade stainless steel · IP67 · Connector groups 2, 3, 4, 5
Diffuse reflection sensor 2...800 mm red 66 H/D PNP 2 10 OGT500
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 2, 3, 4, 5
Background suppression 15...300 mm red 25 H/D PNP 2 10 OGH500
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 2, 4
Background suppression 15...300 mm red 25 H/D NPN 4 10 OGH504
Background suppression 15...300 mm red 25 H/D NPN 4 10 OGH502
Cylindrical housing OG (M18) BasicLine with lateral sensing face
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP68 · Connector groups 2, 3, 4, 5
Background suppression 200 mm red < 28 H PNP 8 11 OG5124
Cylindrical housing OG (M18) WetLine for hygienic and wet areas
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · Cable 6 m · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K
Transmitter 20 m red 800 – 6 12 OGS301
Receiver 20 m red – D PNP 7 12 OGE302
Infrared / red lightsensors
85You can find wiring diagrams from page 93
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · Cable 6 m · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K
Receiver 20 m red – H PNP 7 12 OGE303
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K · Connector group 12
Transmitter 20 m red 800 – 1 3 OGS300
Receiver 20 m red – D PNP 2 3 OGE300
Receiver 20 m red – H PNP 3 3 OGE301
Retro-reflective sensor · Cable 6 m · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K
Polarisation filter 0.03...4 m red 160 D PNP 7 12 OGP302
Polarisation filter 0.03...4 m red 160 H PNP 7 12 OGP303
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K · Connector group 12
Polarisation filter 0.03...4 m red 160 D PNP 2 3 OGP300
Polarisation filter 0.03...4 m red 160 H PNP 3 3 OGP301
Diffuse reflection sensor · Cable 6 m · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K
Background suppression 100 mm red 8 H PNP 7 13 OGH306
Background suppression 100 mm red 8 D PNP 7 13 OGH307
Background suppression 200 mm red 12 H PNP 7 13 OGH308
Background suppression 200 mm red 12 D PNP 7 13 OGH309
Background suppression 300 mm red 15 H PNP 7 13 OGH310
Photoelectric sensors
86Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · Cable 6 m · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K
Background suppression 300 mm red 15 D PNP 7 13 OGH311
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K · Connector group 12
Background suppression 100 mm red 8 H PNP 2 14 OGH300
Background suppression 100 mm red 8 D PNP 2 14 OGH301
Background suppression 200 mm red 12 H PNP 2 14 OGH302
Background suppression 200 mm red 12 D PNP 2 14 OGH303
Background suppression 300 mm red 15 H PNP 2 14 OGH304
Background suppression 300 mm red 15 D PNP 2 14 OGH305
OG housing (M18), rectangular
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP67 · Connector groups 2, 4
Transmitter 20 m red 800 – 1 15 OGS280
Receiver 20 m red – D NPN 9 15 OGE282
Through-beam sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP67 · Connector groups 2, 3, 4, 5
Receiver 20 m red – D PNP 10 15 OGE280
Receiver 20 m red – H PNP 3 15 OGE281
Infrared / red lightsensors
87You can find wiring diagrams from page 93
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 2, 3, 4, 5
Polarisation filter 0.1...4 m red 160 D PNP 10 15 OGP280
Polarisation filter 0.1...4 m red 160 H PNP 3 15 OGP281
Retro-reflective sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 2, 4
Polarisation filter 0.1...4 m red 160 D NPN 9 15 OGP282
Polarisation filter 0.1...4 m red 160 H NPN 11 15 OGP283
Diffuse reflection sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 2, 3, 4, 5
Background suppression 100 mm red 7 H PNP 3 15 OGH280
Background suppression 200 mm red 13 H PNP 3 15 OGH281
Background suppression 15...200 mm red 13 H/D PNP 2 16 OGH580
Diffuse reflection sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 2, 4
Background suppression 100 mm red 7 H NPN 11 15 OGH282
Background suppression 200 mm red 13 H NPN 11 15 OGH283
Background suppression 15...200 mm red 13 H/D NPN 4 16 OGH581
Rectangular housing OJ BasicLine, lateral sensing face
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67
Transmitter 0...10 m red < 1000 – 1 17 OJS200
Photoelectric sensors
88Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67
Receiver 10 m – – D PNP 2 17 OJE200
Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67
Retro-reflective sensor 1.8 m red 64 D PNP 2 17 OJR200
Polarisation filter 1.8 m red 64 D PNP 2 17 OJP200
Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67
Background suppression 100 mm red < 13 H PNP 2 18 OJH200
Rectangular housing OJ PerformanceLine, lateral sensing face
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · Cable 2 m · 10...30 DC · plastics · IP67
Transmitter 10 m red 1000 – 6 19 OJ5033
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector group 1
Receiver 10 m red – H/D PNP 12 20 OJ5031
Transmitter 10 m red 1000 – 1 21 OJ5130
Receiver 10 m – – H/D PNP 12 21 OJ5131
Retro-reflective sensor · Cable 2 m · 10...30 DC · plastics · IP67
Polarisation filter 0...2 m red 64 H/D PNP 13 19 OJ5028
Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector group 1
Polarisation filter 0...2 m red 64 H/D PNP 12 21 OJ5126
Infrared / red lightsensors
89You can find wiring diagrams from page 93
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector group 1
Diffuse reflection sensor 1...600 mm red 60 H/D PNP 12 22 OJ5122
Rectangular housing OJ PerformanceLine, front sensing face
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector group 1
Transmitter 10 m red 1000 – 1 23 OJ5008
Receiver 10 m red – H/D NPN 14 23 OJ5010
Rectangular housing O5 BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 4
Transmitter 20 m red 500 – 1 24 O5S200
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Receiver 20 m red – D PNP 10 24 O5E200
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Polarisation filter 0.1...7 m red 175 D PNP 10 25 O5P200
Polarisation filter 0.1...7 m red 175 H PNP 15 25 O5P201
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP65 · Connector groups 2, 3, 4, 5
Background suppression 50...1400 mm red 50 H PNP 3 26 O5H200
Photoelectric sensors
90Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 4
Background suppression 50...1400 mm red 50 H NPN 11 26 O5H201
Rectangular housing O5 PerformanceLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · Cable 2 m · 10...36 DC · plastics · IP67
Transmitter 25 m red 625 – 6 27 O5S501
Receiver 25 m red – H/D PNP 7 28 O5E501
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 4
Transmitter 25 m red 625 – 1 24 O5S500
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Receiver 25 m red – H/D PNP 2 29 O5E500
Receiver 25 m red – H/D NPN 4 29 O5E502
Retro-reflective sensor · Cable 2 m · 10...36 DC · plastics · IP67
Polarisation filter 0.075...10 m red 250 H/D PNP 7 30 O5P501
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Polarisation filter 0.075...10 m red 250 H/D PNP 2 31 O5P500
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 4
Polarisation filter 0.075...10 m red 250 H/D NPN 4 31 O5P502
Infrared / red lightsensors
91You can find wiring diagrams from page 93
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · Cable 2 m · 10...36 DC · plastics · IP67
Background suppression 50...1800 mm red 50 H/D PNP 7 30 O5H503
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Background suppression 50...1800 mm red 50 H/D PNP 2 31 O5H500
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Background suppression 60...700 mm red 35 H/D PNP 2 31 O5H501
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Background suppression 50...1800 mm red 50 H/D NPN 4 31 O5H504
Rectangular housing O5 PerformanceLine with ATEX approval 3D
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...30 DC· plastics · IP65 · Connector group —
Receiver 25 m red – H/D PNP 2 32 O5E51A
Prismatic reflectors, reflective tape and fixing components
Type Description Orderno.
Prismatic reflector · Ø 80 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20005
Accessories O5 housing
Type Description Orderno.
Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21085
Photoelectric sensors
92Product selectors and further information can be found at: www.ifm.com
Core colours
BN brown
BU blue
BK black
WH white
Wiring diagrams
1
1
3
L+
L
2
L+
L
1
4
3
3
L+
L
1
4
3
4
L+
L
1
4
3
5
L1L+
LN
BN
BU
6
L+
L
BN
BU
7
BN
BK
BU
L+
L
8
L
L+
4
2 n.c.
1
3
9
L+
L
1
4
3
10
L+
L
1
4
3
11
L+
L
1
4
3
12
L+
2
4
1
3 L2: Teach
13
WH
BK
BN
BU
L+
LWH: Teach
14
L+
2
4
1
3 L2: Teach
15
L+
L
1
2
3
16
L
L+
3
2
4
1
L
L+
1
2
4
3
2: function check
Infrared / red lightsensors
93
Scale drawings / drawing no. – CAD download: www.ifm.com
1M
12x1
745554
M12
x1
3 LED 17
4
85
pot.
17
2
M18
x1
M12
x1
3444
LED
4
24
31
27,5
3
M18
x1
M12
x1
4047
6049
LED 4 x 90°
4
24
4
766453
M18
x1
4
5,2
78,5
24
LED
1
1: pushbutton
5
M18
x1
M12
x1
3444
21,4
LED
4
24
31
6,5
1
1: with pot.
6
M18
x1
M12
x1
44
59
7261
LED 4 x 90°
50
1
4
24
1: with pot.
7
M18
x1
35,658
80,460,4
14
24
1: LED 4 x 90°
8
M18
x1
33,859
80,460,6
1
4
242
1: Programming buttons, 2: LED 4 x 90°
9
M18
x1
M12
x1
3459
7261
LED 4 x 90°
4
24
10M
18x1
M12
x1
3459
7261
LED 4 x 90°
1
4
24
1: Programming buttons
11
LED 4 x 90°
13,6
75
M18 x1
M12 x1
646229
419
9,7
27
24
Photoelectric sensors
94Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
12
M18
x1
40
47
68,6
49
LED 4 x 90°
4
24
5
13
4459
80,461
LED 4 x 90°
5
M18
x1
4
24
14
M18
x1
M12
x1
4459
7261
LED 4 x 90°
4
24
15
18
LEDs
38
M18
x1
M12 x1
11,5
35,415,9
24,1
52
243,3
16
3,3
M18
x1
M12 x1
11,5
35,415,9
24,1
52
24
LEDs
1
18
38
1: setting pushbuttons
17
24LED
35
8,5
1,8 5,
3 19
3,5
5
M8x1
36,5
11
8,2
43,5
9
LED
4
11,6
18
9
LED
411
,6
19,5
M8x1
36,5
11
43,5
9,5
24 LED
35
8,5
1,8 5,
3 19
3,5
5
1945
11
LED
8,2
1
9
LED
4
1
24
8,8
3,2
3,1
3,1
LED
35
1
1: pushbutton
Infrared / red lightsensors
95
Scale drawings / drawing no. – CAD download: www.ifm.com
20
45
11
LED
8,2
1
24
3,2
3,1
LED35
M8x1
8,83,1
1
9
LED
4
1
1: pushbutton
21
1
9
LED
4
11,6
M8x1
1
36,5
11
LED
8,2
43,5
1
24LED
35
8,5
1,8 5,
3 19
3,5
5
1: pushbutton
22
9
LED
4
11,6
1
24LED
35
8,5
1,8 5,
3 19
3,5
5
1
M8x1
36,5
11
LED
43,57,
6 16,6
1
1: pushbutton
23
45
11
LED
1
4
LED
4
1
24
8,2
12
35
8,8
3,2
3,1
3,1
LED
M8x1
1
1: pushbutton
24
LED
15,4
18,2
M12 x1
17
5x9
625 1
56
6,446,8
25
70,3
5
LED
61
1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.
25
18,2
M12 x1
1736
,5
LED
15,4
5x9
625 1
56
6,446,8
25
70,3
5
LED
6
1
1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.
Photoelectric sensors
96Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
26
1
38
10
1
LED
24,3
15,4
18,2
M12 x1
19,5
37
5x9
625 2
56
6,446,8
25
70,3
5
1
LED6
2
1: with pot., 2: When a M5 mounting screw is used, the max. tighte-ning torque is 2 Nm.
27
5x9
25
56
6,446,8
25
5
1
LED
6
18,2
17
5
6
LED
15,4
1
1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.
28
5x9
25 2
56
6,446,8
25
5
1
LED
6
2
18,2
17
5
6
1
LED
30,5
24,3
15,4
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
29
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
6
2
18,2
M12 x1
17
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
30
56
6,446,8
255
1
LED
62
5x9
25 2
6
1
LED
30,5
24,3
15,4
18,2
19,5
37
5
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
31
18,2
M12 x1
19,5
37
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
6
2
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
Infrared / red lightsensors
97
Scale drawings / drawing no. – CAD download: www.ifm.com
32
51,8
1LED
3555
62
21,1
30
63 6910
5254
13,5
12
36
25
M12 x133,3
4,223,5
43,5
5,3
20
20
1: Programming buttons
Photoelectric sensors
98Product selectors and further information can be found at: www.ifm.com
Infrared / red lightsensors
99
Detection of minute objects.
Clearly visible red light for easy settingto the object.
Automatic switch point setting bypressing a pushbutton.
Application sensors available for specialapplication areas.
System components available forfine adjustment.
Laser sensors
Laser sensors are used where detection of small objects or precise positioning isrequired. They are available as through-beam sensors, retro-reflective sensors ordiffuse reflection sensors.
Laser light consists of light waves of identical length which have a defined phaserelation (coherence). This results in an important feature of laser systems, that is thealmost parallel light beam. Result: Due to the small angle of divergence long rangesof up to 60 metres can be achieved. The laser spot which is also clearly visible atdaylight simplifies the alignment of the system. Apart from the advantages somepoints have to be taken into account for the selection of the suitable optical system:Compared to standard sensors the laser sensors have a reduced temperature range(-10...60 °C). Life is limited to approx. 50,000 hours. Basically laser systems aremore expensive than normal red light sensors. In view of the small light spot andthe often high ranges the system is more sensitive to vibrations than standardsensors.
Coherent: Lasersensors emit light ofa defined wave lengthand the same phaseposition.
Photoelectric sensors
100Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1 102
Rectangular housing O5 Laser class 1 102 - 103
Prismatic reflector 103
Wiring diagrams 103
Scale drawings / drawing no. – CAD download: www.ifm.com 103
Laser sensors
101
Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 2, 4
Transmitter 2 m red 5 – 1 1 OGS701
Transmitter 60 m red 150 – 1 1 OGS700
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 2, 3, 4, 5
Receiver 2 m red – H/D PNP 2 2 OGE701
Receiver 60 m red – H/D PNP 2 2 OGE700
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 2, 3, 4, 5
Polarisation filter 0.2...2 m red 5 H/D PNP 2 2 OGP701
Polarisation filter 0.2...15 m red 40 H/D PNP 2 2 OGP700
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 2, 3, 4, 5
Background suppression 20...200 mm red 1.2 H/D PNP 2 2 OGH700
Rectangular housing O5 Laser class 1
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 4
Transmitter 60 m red 150 – 1 3 O5S700
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Receiver 60 m red – H/D PNP 2 4 O5E700
Photoelectric sensors
102Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Polarisation filter 15 m red 40 H/D PNP 2 5 O5P700
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 2, 3, 4, 5
Background suppression 20...200 mm red 1.2 H/D PNP 2 6 O5H700
Prismatic reflector
Type Description Orderno.
Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials:plastics
E20722
Wiring diagrams
1
1
3
L+
L
2
L+
L
1
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
M18
x1
M12
x1
3459
7261
LED 4 x 90°
4
24
2
M18
x1
M12
x1
3459
7261
LED 4 x 90°
1
4
24
1: Programming buttons
3
LED
15,4
18,2
M12 x1
26
5x9
625 1
56
6,446,8
25
70,3
5
LED
6
1
Laser sensors
103
Scale drawings / drawing no. – CAD download: www.ifm.com
4
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED6
2
18,2
M12 x1
265
18,2
M12 x1
26
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
6
2
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
6
18,2
M12 x1
19,5
37
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
62
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
Photoelectric sensors
104Product selectors and further information can be found at: www.ifm.com
Laser sensors
105
Non-contact distance detection at a high range.
Analogue and switching outputs.
Small light spot and exact background suppression.
Compact and robust metal housing.
Unbeatable price / performance ratio.
Optical distance detection using PMD technology
For collision avoidance, completeness check, level monitoring or as diffuse reflectionsensor with an extraordinary range: The efector pmd distance sensors can be usedin a wide range of applications. Depending on the type, the laser sensors preciselydetermine distances up to 10 m or up to 75 m when a reflector is used. The robustmetal housing ensures operational reliability even under rough operatingconditions.
Operating principle
The efector pmd laser sensors operate to the time-of-flight principle.
The pmd sensor’s receiver element is a „System-on-Chip“ design. Both sensorelement and electronics for signal evaluation are integrated on a single silicon chipcalled a Photonic Mixer Device (PMD). Advantage: This innovative ifm design offershigh performance in a compact, industrially compatible housing – at a fraction ofthe price of conventional systems.
The determined distance is indicated on the 4-digit display and provided via thescalable analogue output (4…20 mA). The user can program two switching outputswhich switch when a certain distance is reached. Up to 50 measurements persecond are possible (adjustable). The light spot diameter is 6 mm at a 10 m dis-tance. This makes the sensor suitable for applications requiring exact backgroundsuppression. An outstanding feature of efector pmd is the extremely compact sizeof only 42 x 45 x 52 mm.
The efector pmdprovides an analoguesignal that is propor-tional to the object-to-sensor distance.
Collision avoidanceon an overhead con-
veyor: efector pmdmonitors distancesbetween products.
Photoelectric sensors
106Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Rectangular O1 housing for optical distance measurement, laser class 2 108
Wiring diagrams 108
Scale drawings / drawing no. – CAD download: www.ifm.com 108
Distance detection
107
Rectangular O1 housing for optical distance measurement, laser class 2
Type Operating principle Range
[mm]
Samplingrate
[Hz]
Spot Ø atmax.range[mm]
Ub
[V]
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 1 · Connector groups 2, 4, 5
Optical distance sensor 1...75 m 1...33 150 18...30 1 1 O1D106
Optical distance sensor 0.2...10 m 1...33 6 18...30 1 1 O1D105
Optical distance sensor 0.2...10 m 1...50 6 18...30 1 1 O1D100
Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 2 · Connector groups 2, 4, 5
Optical distance sensor 0.2...10 m 1...50 6 18...30 2 1 O1D103
Wiring diagrams
1
L+
L3
4
2
1
Out 1Out 2
4:2:
4
L
L+1
2
3Out 1Out 2
4:2:
2
L
L+
Out 2Out 1
2:4: 3
4
2
1L+
LOut 2Out 1
2:4: 3
2
4
1
Scale drawings / drawing no. – CAD download: www.ifm.com
1
52
1 2
30
45
2520
4,5
6
4559
42
M12x1
30
1: 4-digit alphanumeric display, 2: Programming buttons
Photoelectric sensors
108Product selectors and further information can be found at: www.ifm.com
Distance detection
109
High-quality photoelectric sensors fordifferent applications.
Excellent price / performance ratio.
Easy adjustment via teach buttons or potentiometer.
Wide range of system components for easy and safe mounting.
Detection of transparent objects
Counting bottles and glasses or the reliable monitoring of film for tear can beperformed without problem using specially designed retro-reflective sensors.ifm electronic offers a retro-reflective sensor with a small switching hysteresis, inparticular for the detection of transparent objects. Due to the operating principle,retro-reflective sensors have the advantage that the light beam must pass the objectto be detected twice, weakening the light sufficiently to detect a transparent objectreliably. Precise adjustment is made by means of the teach buttons.
Contrast sensor
The O5 contrast sensor is specially suitable for detecting print marks and particularlyflat objects.
With its RGB transmitter LED the sensor detects even very small differences incontrast. During set-up it automatically selects the optimum transmitter colour fromthe colours red green blue (RGB) to ensure maximum energy difference of thereflected light. In addition, the teach method saves time and money. Pressing theteach buttons twice is enough for the sensor to be ready for operation.
High-resolution colour sensor
The new electronic colour sensor from ifm electronic detects the colour, packaging,label or imprint of objects at a high resolution. With the five selectable tolerancesteps, the colour sensor perfectly differentiates even the finest shades of colourfrom the background or other objects. The unit is set to the colour to be detectedby one push of the button. This saves time and money.
Optical fork and angle sensors
The optical fork and angle sensors are made from distortion-resistant diecast zincand feature a high switching frequency. Applications are in particular part monitor-ing in feeding technology and handling systems. Further application examples arebelt edge and double feed monitoring.
Sensitivity setting using the potentiometer and setting of light-on / dark-on modeusing the rotary switch are simple and time-saving. No complex adjustment isrequired because transmitter and receiver are already aligned towards each other.Due to the fine and precise red light beam which is constant across the entire forkwidth, out-of-balance monitoring of shafts can also be carried out.
Typical application forcontrast sensors:Counting of glassbottles.
The optical fork andangle sensors are
especially used forpart monitoring in
feeding technologyand handling systems.
Photoelectric sensors
110Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Sensors for the detection of transparent objects 112
Contrast sensors 112
Sensors for colour detection 112
Photoelectric sensors 112
Optical fork sensors 113
Prismatic reflector 114
Accessories O5 housing 114
Wiring diagrams 114
Scale drawings / drawing no. – CAD download: www.ifm.com 115
For specific systems
111
Sensors for the detection of transparent objects
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...36 DC ¹) · plastics · IP67 · Connector groups 4, 6
Polarisation filter 0...1.5 m red 40 / 80 H/D PNP/NPN 5 1 O5G500
Contrast sensors
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
M12 connector · 10...36 DC · plastics · IP67 · Connector groups 4, 6
Diffuse contrast sensor 18...22 mm red 1.5 x 5 H/D PNP/NPN 6 2 O5K500
Sensors for colour detection
Type Operating principle Measuringrange
Light spotdiameter
[mm]
Ub
[V]
Currentconsumption
[mA]
Sampling rate /switching frequency
[Hz]
Draw-ingno.
Orderno.
M12 connector · Output function light-on / dark-on programmable · DC PNP/NPN · Wiring diagram no. 1 · Connector groups 4, 6
Colour sensor 15...19 mm 2.5 x 6 10...36 50 2000 2 O5C500
Photoelectric sensors
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector group 12
M12 / L = 63 50 f high-grade st. steel 10...30 IP68 1600 100 3 JAC201
f = flush / nf = non flush
Photoelectric sensors
112Product selectors and further information can be found at: www.ifm.com
Optical fork sensors
Type Fork width(w)
[mm]
Fork depth(d)
[mm]
Smallestdetectableobject Ø
[mm]
Switchingfrequency
[Hz]
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 7
10 17 0.3 10000 H/D PNP/NPN 10...35 4 OPU200
Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 3
20 25 0.4 4000 H/D PNP 10...35 5 OPU201
30 35 0.5 4000 H/D PNP 10...35 6 OPU202
50 55 0.5 4000 H/D PNP 10...35 7 OPU203
80 55 0.5 4000 H/D PNP 10...35 8 OPU204
120 60 0.8 2000 H/D PNP 10...35 9 OPU205
Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 4
20 25 0.4 4000 H/D NPN 10...35 5 OPU207
30 35 0.5 4000 H/D NPN 10...35 6 OPU208
50 55 0.5 4000 H/D NPN 10...35 7 OPU209
80 55 0.5 4000 H/D NPN 10...35 8 OPU210
120 60 0.8 2000 H/D NPN 10...35 9 OPU211
For specific systems
113You can find wiring diagrams from page 114
Prismatic reflector
Type Description Orderno.
Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials:plastics
E20722
Accessories O5 housing
Type Description Orderno.
Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21085
Wiring diagrams
1
L+
L
2
5
1
4
3
Out
N.C.
AT
2: Input AT activation trigger,5: n.c. = not connected
2
L+
L
1
4
3
3
L+
L
1
4
3
4
L+
L
1
4
3
5
L+
L
2
5
1
4
3
n.c.
L+
L
2
5
1
4
3
n.c.
6
L+
L
1
4
3
L+
L
1
4
3
7
L+
L
1
4
3
L+
L
1
4
3
Photoelectric sensors
114Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
1
18,2
M12 x1
19,5
37
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED6
2
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
2
56
6,446,8
25
70,3
5
1
LED
6
2
1
LED
30,5
24,3
15,4
5x9
625 2
18,2
M12 x1
25,9
38
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
3
M12
x1
174
M12
x1
5263
LED 4 x 90°
43
4
6M8x
1
10
4,34,5
4,5
12,5
10
W=
10
4
D = 17
45
25
LED
12
22
10
1: output function switch , 2: potentiometer sensitivity
5
W=
20
4,34,5
4,5
D=25
5
50
M8x
1
10
LED
12,5 10
10
4,5
12 20,5
10
1: potentiometer sensitivity, 2: output function switch
6
12
2030
M8x
1
10
LED
4,34,5
4,5
4,5
12,5
10
1010
W=
30
5
D = 35
60
1: potentiometer sensitivity, 2: output function switch
7
12
2030
10
M8x
1
10
LED
4,34,5
4,5
4,5
12,5
1010
W=
50
5
D = 55
80
1: potentiometer sensitivity, 2: output function switch
8
12
2030
M8x
1
10
LED
4,34,5
4,5
4,5
12,5
10
1010
W=
80
5
D = 55
80
1: potentiometer sensitivity, 2: output function switch
For specific systems
115
Scale drawings / drawing no. – CAD download: www.ifm.com
9
37
5262
12
M8x
1
10
LED
4,3 5 20
2222
1212
W=
120
10
D = 60
90
1: potentiometer sensitivity, 2: output function switch
Photoelectric sensors
116Product selectors and further information can be found at: www.ifm.com
For specific systems
117
Slim design with ranges up to 20 m for all protected areas.
Type 2 and type 4 safety light curtains to IEC 61496.
With SIL 2 & 3 to IEC 61508 and PL d & e to ISO 13849.
Can be installed in L shape without dead band.
Easy connection via the tried and tested M12 connector.
Safety light curtains and light grids
Safety light curtains and safety light grids are used where movements of machineparts represent a risk for people or goods.
The difference of the systems is the different resolution of the beams.
Depending on the risk, the protective function is classified into finger, hand or bodyprotection as well as primary guarding. When the light beam is interrupted, theprotective equipment ensures deactivation of the outputs. The machine is broughtinto the state defined as safe.
Tested safety
The safety light curtains and light grids from ifm electronic have been developedaccording to the current standards EN 61496, ISO 13849-1 and IEC 62061 andcertified by TÜV. They meet the requirements of type 2 with SILcl 2 and PL d as wellas type 4 with SILcl 3 and PL e.
Slim design or long range
The safety light curtains and safety light grids from ifm electronic are distinguishedby the very slim design (28 x 30 mm) and long ranges up to 20 m. Finger, hand andbody protection reliably ensure primary guarding or access prevention. ifm offersnew safety light grids for applications with especially long ranges. The new housingof our OY9 is slightly bigger and offers a range up to 60 m.
These light curtains are designed for protected area heights of 160 mm to 1510mm in intervals of 150 mm. A resolution (detection capacity) of 14, 20, 30, 40, 50or 90 mm can be selected. Light grids are offered with 2, 3 or 4 beams.
Safety light grids are also available as active / passive system.
Safety light curtainscan be used for fingeror hand protection.
Safe protection ofbodies on a robot cell.
Photoelectric sensors
118Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Safety relays for safety light curtains 120
Scale drawings / drawing no. – CAD download: www.ifm.com 120
Safety light curtains / light grids
119
Safety relays for safety light curtains
Type Description Draw-ingno.
Orderno.
Safety relay · Relay outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safesensors/switches and for use as two-hand control · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e ·
SIL 3 (IEC 61508) · Type IIIC (EN 574)1 G1501S
Scale drawings / drawing no. – CAD download: www.ifm.com
1
25
100
LED
35,5
105
1: Combicon connector with screw terminals, 2: mounting on DIN rail
Photoelectric sensors
120Product selectors and further information can be found at: www.ifm.com
Safety light curtains / light grids
121
2D vision sensor for object recognition.
3D sensor for assessment of distance, level or volume.
3D camera for spatial detection of scenes and objects.
Illumination units with high luminous power.
Tough, industrial housings.
2D vision sensor for object recognition
In automation technology visions sensors are an integral part of assembly andmanufacturing tasks as well as quality control and thus increase efficiency. They arecameras with application-specific evaluation, i.e. reliable electronic eyes at a lowcost and a high degree of integration. In a robust, industrially compatible housingthey combine lighting, lens, camera chip, evaluation and process connections forthe integration in the higher-level controller.
The application possibilities of efector dualis range from presence, position andorientation monitoring, via sorting and counting tasks to quality control.
3D sensor for assessment of distance, level or volume
efector pmd 3d is the first industrial 3D sensor that can assess objects in threedimensions at a glance.
Special feature: The time-of-flight measurement and evaluation are integrated onone chip. Each pixel of this chip matrix evaluates its distance to the object. Theimage of the object on the chip matrix and the respective distance valuescorrespond to a 3D image.
This technology enables the detailed assessment of the object’s or scene’s condi-tions by means of volume, distance or level detection in three dimensions. Typicalapplications are completeness checks and level monitoring in the food industry aswell as presence and dimension monitoring in conveying.
3D camera for detection in three dimensions of scenes and objects
The pmd 3d camera detects scenes and objects in their spatial dimensions at aglance. In contrast to laser scanners it does not require moving components and isthus robust and wear-free. The operating principle is the same as for the 3D sensor.
Besides the 3D distance image the camera provides a grey image of the scene. Thecombination of these images offers integrators the possibility to freely programapplication-specific tasks by means of a software development kit. This results inlow-cost application solutions in the areas of packaging, storage and materialshandling, airport logistics, collision avoidance, robotics, monitoring of space andpersons.
Set-up in just a fewsteps: The profes-sional and easy menuguidance allowsconfiguration of theefector dualis to yourapplication in just sixoperating steps.
Object recognition
122Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Sensors for object recognition with PNP output function 124
Sensors for 3D object recognition 124
Connection cables for 2D and 3D sensors 124
Scale drawings / drawing no. – CAD download: www.ifm.com 124
Object recognition
123
Sensors for object recognition with PNP output function
Type Operatingprinciple
Max.field of view size
[mm]
Resolution Detectionrate
[Hz]
Typeof light
Ambienttemperature
[°C]
Draw-ingno.
Orderno.
Type O2D2 · M12 plug, 8 poles M12 socket, 4 poles · metal · DC
CMOS image sensor B/W,VGA resolution 640 x 480
1280 x 960 0.3 10 infrared -10...60 1 O2D222
Sensors for 3D object recognition
Type Operatingprinciple
Resolution
[pixels]
Angle of aperture(horizontal x vertical)
[°]
Lighting Max.sampling
rate[Hz]
Ambienttemperature
[°C]
Draw-ingno.
Orderno.
PMD 3D sensor · Type O3D · M12 connector · metal · DC
PMD 3D sensor 64 x 48 30° x 40° Infrared LED 20 -10...50 2 O3D200
Connection cables for 2D and 3D sensors
Type Description Orderno.
Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080
Scale drawings / drawing no. – CAD download: www.ifm.com
1
M12x1
2
19
M12x1
53,5
4,3
20,5
44
19,7
33
1
45
24,5
42
57
8060
21
9,57
3
1: display, 2: Focus setting, 3: Centre of the lens axes
2
95
60,540
4563
,8
16
75
137
120
123,
5
18
M12x1
M12x1
94
21,5
1: lens, 2: Illumination unit, 3: Display / buttons / LEDs, 4: Focus set-ting
Object recognition
124Product selectors and further information can be found at: www.ifm.com
Object recognition
125
Robust designs.
Industrial standard housings.
Cable entry for axial and radial use.
Designs with integrated bus interface.
Hollow shaft encoder for direct mounting on actuators.
Encoders
In many manufacturing and production processes encoders are indispensable asreliable transducers to ensure precise positioning. They convert rotary movementinto digital signals. Encoders use the wear-free photoelectric detection. A pulse discfirmly attached to the shaft ensures this detection.
Incremental encoders
Incremental encoders generate a precisely defined number of pulses per revolution.They are a measure of the angular or linear distance moved.
The coded disc is divided into separate segments which are alternately transparentor opaque. An LED emits a parallel-orientated light beam which illuminates all seg-ments of the coded disc. Photo elements receive the modulated light and convert itinto two sinusoidal signals. Digitalisation electronics amplify the signals and shapethem into square-wave pulse trains which are generated via the line driver in theoutput. The phase difference between signals A and B, which are phase-shifted by90 degrees, allows evaluation of the direction of rotation.
Absolute encoders
Absolute encoders provide an absolute numerical value for each angular position.This code value is available immediately after power is applied. This “absolute”value makes a reference procedure like the one required for the incrementalencoder unnecessary. Absolute encoders are used wherever angular positions haveto be allocated to a certain value and where the detection of the present position isabsolutely necessary in the case of a power failure.
Singleturn and multiturn
Singleturn encoders divide a mechanical revolution (0 to 360 degrees) into a certainnumber of measuring steps. The measuring values are repeated after one revolu-tion. The maximum resolution is 8192. Multiturn encoders, however, do not onlydetect angular positions but also distinguish between multiple revolutions.
Linear measurementby means of a count-er: Rotary movementis converted intodigital signals.
Hollow shaft encoderfor direct mounting
on the axis.
Encoders
126Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Incremental encoders with solid shaft 128 - 129
Couplings for encoders 129
Scale drawings / drawing no. – CAD download: www.ifm.com 130
Encoders
127
Incremental encoders with solid shaft
Type Resolution Ub
[V]
f
[kHz]
Iload
[mA]
Shaft
[mm]
Ambienttemperature
[°C]
Cableentry
Draw-ingno.
Orderno.
Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min
100 10...30 160 50 6 -30...70 radial / axially 1 RB6007
360 10...30 160 50 6 -40...70 radial / axially 2 RB6013
500 10...30 160 50 6 -30...70 radial / axially 1 RB6015
Cable 2 m · Output function TTL output 20 mA
500 5 300 20 10 -40...100 radial / axially 3 RV1016
1000 5 300 20 10 -40...100 radial / axially 3 RV1024
1024 5 300 20 10 -40...100 radial / axially 3 RV1025
2000 5 300 20 10 -40...100 radial / axially 3 RV1033
2500 5 300 20 10 -40...100 radial / axially 3 RV1036
5000 5 300 20 10 -40...100 radial / axially 3 RV1051
Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min
50 10...30 300 50 10 -40...100 radial / axially 3 RV6001
100 10...30 300 50 10 -40...100 radial / axially 3 RV6003
200 10...30 300 50 10 -40...100 radial / axially 3 RV6009
250 10...30 300 50 10 -40...100 radial / axially 3 RV6010
360 10...30 300 50 10 -40...100 radial / axially 3 RV6013
Encoders
128Product selectors and further information can be found at: www.ifm.com
Type Resolution Ub
[V]
f
[kHz]
Iload
[mA]
Shaft
[mm]
Ambienttemperature
[°C]
Cableentry
Draw-ingno.
Orderno.
Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min
500 10...30 300 50 10 -40...100 radial / axially 3 RV6016
600 10...30 300 50 10 -40...100 radial / axially 3 RV6018
1000 10...30 300 50 10 -40...100 radial / axially 3 RV6024
1024 10...30 300 50 10 -40...100 radial / axially 3 RV6025
1250 10...30 300 50 10 -40...100 radial / axially 3 RV6028
2000 10...30 300 50 10 -40...100 radial / axially 3 RV6033
2048 10...30 300 50 10 -40...100 radial / axially 3 RV6034
2500 10...30 300 50 10 -40...100 radial / axially 3 RV6036
3600 10...30 300 50 10 -40...100 radial / axially 3 RV6040
5000 10...30 300 50 10 -40...100 radial / axially 3 RV6100
Couplings for encoders
Type Description Orderno.
Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 8 mm · Housing materials: aluminium E60120
Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 10 mm · Housing materials: aluminium E60066
Encoders
129You can find wiring diagrams and scale drawings from page 130
Scale drawings / drawing no. – CAD download: www.ifm.com
1
25
12
37,5
6
18 35
215
30°
4,5
1: reference mark, 2: M3 5 mm deep
2
38
618 36
,5
215
30°
4,5
25
12
1: reference mark, 2: M3 5 mm deep
3
10
36 58
f8
1
1,52046,7±0,5
106
48
120°
1 2
1: reference mark, 2: M3 5 mm deep
Encoders
130Product selectors and further information can be found at: www.ifm.com
Encoders
131
Easy adjustment and parameter setting.
Primary voltage 24V dc or110 / 230V ac, wide-range input.
Programmable switching characteristics.
Standstill, overspeed, direction, slip andfrequency conversion, counter.
Switching relays and transistor outputs,scalable analogue output.
Evaluation systems
Although PLC applications in industrial automation are becoming more and moreversatile there are still numerous processes in practice which require decentralisedmonitoring.
For this ifm electronic offers a number of pulse evaluation systems in the productgroup “ecomat 200”. The application area ranges from simple standstill monitoringor blockage protection of a conveyor belt, maximum speed monitoring in windpower stations, slip monitoring of couplings through to direction monitoring, e.g.twin pumps with non-return valves.
Different units for rail mounting and compact designs in M18 and M30 metalhousings are available. They include microprocessor-controlled units for panemounting to display analogue signals, RPM, speeds, processing times, quantitiesand electronic preset counters for the detection of quantities or linearmeasurement.
All units are distinguished by a high reliability and easy handling. Independent ofthe PLC they indicate operating states or signal faults. This helps to reduce down-times and production loss.
ifm electronic offers the following evaluation systems:
– Speed monitors
– Standstill monitors
– Slip / synchronisation monitors
– Direction monitors
– Frequency-to-current converters
– Threshold relays
– Displays with frequency and analogue input
– Counters
– Switching amplifiers
Pulse evaluationsystems are used fordecentralised moni-toring of drives.
Machine cycles mustalso be monitored in
conveying.
Evaluation systems
132Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Universal speed monitors 134
Dual speed monitors with sensor wire monitoring 134
Frequency-to-current converters 134
Standard speed monitors 134
Standstill monitors 135
Speed monitor with integrated sensor 135
2-channel threshold relay for analogue standard signals 135
Wiring diagrams 135
Scale drawings / drawing no. – CAD download: www.ifm.com 136
Evaluation systems
133
Universal speed monitors
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FR-1 · 2 switch points for monitoring overspeed/underspeed and acceptable range
110...240 AC/DC (50...60Hz) / 27 DC (typ. 24 DC)
1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2003
Dual speed monitors with sensor wire monitoring
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FR-2N · 1 switch point each for monitoring overspeed/underspeed and acceptable range
110...240 AC/DC (50...60Hz) / 27 DC (typ. 24 DC)
2 Namur 8.2 V 1...60000 0.1...1000 – 2 4 1 DD2105
Frequency-to-current converters
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FA-1 · Conversion of pulse sequences into analogue standard signals
110...240 AC/DC (50...60Hz) / 27 DC (typ. 24 DC)
1 PNP / NPN / Namur 0...600000 0...10000 2 1 1 1 DW2003
Standard speed monitors
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
D100 · evaluation of pulse sequences with regard to overspeed and underspeed; rotational speed monitoring
230 AC (50...60 Hz) / 24DC
1 PNP 5...5000 – – 1 – 2 DD0001
Evaluation systems
134Product selectors and further information can be found at: www.ifm.com
Standstill monitors
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
A300 · Evaluation of pulse sequences with regard to underspeed or missing pulse
230 AC (50...60 Hz) / 24DC
1 PNP5...25 /
20...100– – 1 – 3 DA0001
Speed monitor with integrated sensor
Type Dimensions
[mm]
Sensingrange
[mm]
Electricaldesign
Ub
[V]
Settingrange
[puls. / min.]
Start-updelay
[s]
Draw-ingno.
Orderno.
Output · Wiring diagram no. 1
M30 / L = 81 10 f DC PNP 10...36 DC 3...300 15 4 DI5001
f = flush / nf = non flush
2-channel threshold relay for analogue standard signals
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
AL-3 · 2-channel analogue threshold relay for analogue standard signals
110...240 AC/DC (50...60Hz) / 27 DC (typ. 24 DC)
2 2 x 0/4...20 mA – – 1 1 1 5 DL2003
Core colours
BK black
BN brown
BU blue
Wiring diagrams
1
BN
BK
BU
L+
L
Evaluation systems
135
Scale drawings / drawing no. – CAD download: www.ifm.com
1
45
78
1 4 652
19 20 21 22 23 24
13 14 15 16 17 18
3
97A1 8A2 10 11 12
120
35,5
1
1: mounting on DIN rail
2
55
75
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
110
35,5
1
1: mounting on DIN rail
3
55
75
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
110
35,5
1
1: mounting on DIN rail
4
36
8167
58
5
M30
x1,5
9
18
2 LED
pot. 61
5
45
78
1 4 652
19 20 21 22 23 24
13 14 15 16 17 18
3
97 8 10 11 12
120
35,5
1
1: mounting on DIN rail
Evaluation systems
136Product selectors and further information can be found at: www.ifm.com
Evaluation systems
137
Evaluation systemsfor safety and EX
138Product selectors and further information can be found at: www.ifm.com
Evaluation systemsfor safety and EX
139
Safety
System description / System overviewProduct selection chartScale drawings / drawing no. – CAD download: www.ifm.com
140 - 141142142
EX
System description / System overviewProduct selection chartScale drawings / drawing no. – CAD download: www.ifm.com
144 - 145146146
Multifunctional with relay outputs or semiconductor outputs.
Connection of electro-sensitive protective equipment.
e-stop and possibility to connect mechanical safety relays.
Two-hand control to EN 574 up to type IIIC, mechanical or electronic.
Certified to IEC 61508, ISO 13849-1, EN 574.
Safety relays for protection of operators and machinery
The EC machinery directive stipulates machinery should not present a risk (EN1050and EN ISO 14121-1). Since there is no zero risk, the aim is to achieve an acceptableresidual risk. If safety is dependent on control systems, these must be designed soas to minimise malfunction.
For this, ifm offers multifunctional safety relays. A major advantage of these units istheir flexibility. They perform monitoring tasks in safety applications in conjunctionwith different electro-sensitive protective equipment (ESPE).
On the safe side.
The relays are certified according to IEC 61508 SIL3, ISO 13849-1 PL e and EN 574up to type IIIC.
They have several multifunctional self-detecting and self-monitoring inputs as wellas short-circuit proof outputs. Concerning the type of output the user can selectbetween relay outputs and semiconductor outputs. Moreover, outputs with switch-off delay are available for specific applications.
It is possible to connect OSSD sensors, mechanical switches (e-stop) or implementtwo-hand applications with electronic or mechanical switches. When used as two-hand control devices, the requirements of type IIIB to EN574 can be met.
The units have a simultaneity monitoring of inputs. The offer the functions“automatic start” or “monitored start” and also allow monitoring of external relaycontacts.
Mechanical as well aselectronic safety sen-sors can be connectedto the safety relays.
Safety relays monitorcomplete series of
safety sensors.
Evaluation systemsfor safety and EX
140Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Safety relays with relay outputs for fail-safe sensors 142
Scale drawings / drawing no. – CAD download: www.ifm.com 142
Safety
141
Safety relays with relay outputs for fail-safe sensors
Type Ub
[V]
Sensorinput /output
Safety-relatedoutput
Signalcontacts
(NC)
Feedbackcontacts
Responsetime
[ms]
Offdelay
[ms]
Draw-ingno.
Orderno.
24 DC (19.2...30DC)
1/2 2 1 1...n < 180 – 1 G1501S
Scale drawings / drawing no. – CAD download: www.ifm.com
1
25
100
LED
35,5
105
1: Combicon connector with screw terminals, 2: mounting on DIN rail
Evaluation systemsfor safety and EX
142Product selectors and further information can be found at: www.ifm.com
Safety
143
One or two-channel NAMUR switching amplifiers to IEC 60947-5-6.
Short-circuit and wire-break monitoring.
Programmable output function.
Relay or transistor outputs.
Easy mounting on DIN rail.
Hazardous gas and dust areas
ATEX stands for “atmosphère explosible“. The 94/9/EC and 1992/92/EC directivesare also commonly called “ATEX directives”.
You can find hazardous areas in many different industries. Examples are the foodand feedstuffs industry, woodworking, disposal and recycling operations and thetypical industries of chemistry, for example gas and oil-processing plants.
It is basically distinguished between “G” (gas, i.e. fog, steams) and “D” (dust).There are three unit categories each for gas and dust (1 - 3) that are analogous tothe gas zones 0 / 1 / 2 or dust zones 20 / 21 / 22. Example: Electrical apparatus ofthe 1G category may be operated in zone 0.
NAMUR switching amplifiers for hazardous areas
The one or two-channel NAMUR switching amplifiers evaluate the sensor signal andcontrol the output. They meet all requirements of the ATEX directives. Switchingamplifiers with relay and transistor output are available. The switching amplifiers aredesigned for the connection of NAMUR sensors to IEC 60947-5-6 and mechanicalswitches. They provide the voltage supply via an electrical separation for theintrinsically safe circuit.
Further features of the switching amplifiers are:
– Programmable effective direction of the output.
– Relay output designed as changeover contact.
– Short-circuit proof transistor outputs.
– The sensor cables are monitored for wire break and short circuit. In case of a�fault, the output is blocked or the relay is de-energised.
Typical hazardous gasareas are found in thechemical industry, forexample in gas andpetroleum processing.
Examples for thehazardous dust areas
are the food andfeedstuffs industries,but also disposal andrecycling operations.
Evaluation systemsfor safety and EX
144Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Switching amplifiers with ATEX approval 146
Scale drawings / drawing no. – CAD download: www.ifm.com 146
EX
145
Switching amplifiers with ATEX approval
Type Ub
[V]
Power / currentconsumption
[VA] / [mA]
f
[Hz]
Ta
[°C]
Output Protection Draw-ingno.
Orderno.
24 / < 23 10 -20...60 relay (1 changeover contact) IP20 1 N0530A
Scale drawings / drawing no. – CAD download: www.ifm.com
1
112
35,5
20
120
LED
1
1: Combicon plug with screw terminals (optional)
Evaluation systemsfor safety and EX
146Product selectors and further information can be found at: www.ifm.com
EX
147
No movings parts means highreliability and long life.
Guided wave radar, capacitive andhydrostatic level sensors.
Outputs for continuous or point levelmeasurement.
Integrated LED display for localindication of the current level.
Suitable for common industrial andprocess fluids.
Level sensors
In industrial applications where fluids or bulk material are used, storage tanks orsilos are used for processing or storing of media. Sensors are used to detect thelevels. Even critical process conditions such as emptying a hydraulic tank or theunintentional overspill of a tank are monitored by level sensors.
Advantages of electronic sensors
Deposits and wear and tear often lead to failures in particular if mechanicalswitches are in contact with the medium. The electronic ifm sensors however cando without any mechanical components. This makes the sensors especially robustand reliable.
Another advantage of electronic sensors is the local indication of the level or theeasy setting of the switching threshold simply by pressing a button.
Measurement technique
For continuous level measurement the level is detected continuously, convertedinto an electrical signal and indicated. Depending on the type the units have freelyprogrammable switching outputs or an analogue output for further processing.
Continuous level sensors from ifm electronic use three different physical measuringprinciples:
For capacitive measurement the probe and the tank form an electrical capacitor.The capacity changes with the level and is converted into a level measurement by amicroprocessor.
For hydrostatic level measurement a measuring cell detects the hydrostatic pressureof the material. Here the pressure change is a measure for the level.
The efector gwr level sensor operates on the principle of guided wave radar.Electromagnetic pulses are transmitted by the sensor head and guided along theprobe. If the microwave pulse hits the medium to be detected, it is reflected andthe time of flight is evaluated by the sensor.
Measurement inthe medium:Probe sensors will bedirectly immersed inthe medium to bemonitored.
For special applica-tions: Capacitiveprobe sensor for
monitoring oils andcoolants.
Level sensors
148Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Electronic level sensors for oils and coolants, approval to the German Federal Water Act (WHG), section 19 150
Electronic level sensors for oils and coolants 150
Variable level sensors, guided wave radar 151
Sensors for hydrostatic level monitoring 151
Sensors for hydrostatic level monitoring in hygienic and wet areas 151 - 152
Accessories for level sensors PA, PG, PI, PN, PS, PY 152
Accessories for level sensors LM 153
Wiring diagrams 153
Scale drawings / drawing no. – CAD download: www.ifm.com 154
Level sensors
149
Electronic level sensors for oils and coolants, approval to the German Federal Water Act(WHG), section 19
Type Probe length
[mm]
Activezone
[mm]
Inactivezone
[mm]
Ub
[V]
Mediumtemperature
water[°C]
Mediumtemperature
oil[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable (OUT1) 1 x normally closed (OUT-OP, overflow output)· DC PNP · Wiring diagram no. 1 · Connector groups 2, 4, 5
264 195 53 / 15 12...30 0...35 0...65 200 1 LK1222
472 390 53 / 30 12...30 0...35 0...65 200 1 LK1223
728 585 102 / 40 12...30 0...35 0...65 200 1 LK1224
Electronic level sensors for oils and coolants
Type Probe length
[mm]
Activezone
[mm]
Inactivezone
[mm]
Ub
[V]
Mediumtemperature
water[°C]
Mediumtemperature
oil[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector (according to EN 61076-2-101) · Output function 1 x analogue 4...20 mA / 0...10 V (OUT2); 1 x normally open / closed programmable (OUT-OP) · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4
264 195 53 / 15 18...300...35 (LK3122 +E43100: 0...65)
0...70 200 2 LK3122
472 390 53 / 30 18...300...35 (LK3123 +E43101: 0...60)
0...70 200 2 LK3123
728 585 102 / 40 18...300...35 (LK3124 +E43102: 0...55)
0...70 200 2 LK3124
M12 connector (according to EN 61076-2-101) · Output function 3 x normally open / closed programmable (OUT1...OUT3); 1 x normally open / closed programmabl (OUT-OP) · DC PNP · Wiring diagram no. 3
264 195 53 / 15 18...300...35 (LK8122 +E43100: 0...65)
0...70 200 2 LK8122
472 390 53 / 30 18...300...35 (LK8123 +E43101: 0...60)
0...70 200 2 LK8123
728 585 102 / 40 18...300...35 (LK8124 +E43102: 0...55)
0...70 200 2 LK8124
Level sensors
150Product selectors and further information can be found at: www.ifm.com
Variable level sensors, guided wave radar
Type Processconnection
Probe length
[mm]
Activezone
[mm]
Inactive zone
[mm]
Ub
[V]
Mediumtemperature
[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector (according to EN 61076-2-101) · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DCPNP · Wiring diagram no. 4 · Connector groups 2, 3, 4
G¾ A 100...1600HIGH: L - 40;LOW: L - 60
HIGH: 30 / 10;LOW: 30 / 30
18...30 0...80 *** 200 3 LR3000
M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 5 · Connector groups 2, 4, 5
G¾ A 100...1600HIGH: L - 40;LOW: L - 60
HIGH: 30 / 10;LOW: 30 / 30
18...30 0...80 *** 200 3 LR7000
M12 connector (according to EN 61076-2-101) · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 6
G¾ A 100...1600HIGH: L - 40;LOW: L - 60
HIGH: 30 / 10;LOW: 30 / 30
18...30 0...80 *** 200 4 LR8000
Sensors for hydrostatic level monitoring
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
Output 4...20 mA analogue · Wiring diagram no. 7
– – 0...0.25 2 2.4 10...30 5 PS3208
– – 0...0.6 4 4.8 10...30 5 PS3407
– – 0...1 5 6 10...30 5 PS3417
Sensors for hydrostatic level monitoring in hygienic and wet areas
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · Wiring diagramno. 8 · Connector groups 2, 3, 4
Aseptoflex Display unit -0.0124...0.25 10 30 18...32 6 PI2098
Aseptoflex Display unit -0.05...1 10 30 18...32 6 PI2097
Level sensors
151You can find wiring diagrams from page 153
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 (20...4) mA analogue (scaleable 1:4) · Wiring diagram no. 9 · Connector groups 2, 3, 4
Aseptoflex Display unit -1...1 10 30 20...32 6 PI1099
Aseptoflex Display unit -0.0124...0.25 10 30 20...32 6 PI1098
Aseptoflex Display unit -0.05...1 10 30 20...32 6 PI1097
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · Wiringdiagram no. 8 · Connector groups 2, 3, 4
Aseptoflex Vario Display unit -0.005...0.1 4 30 18...32 7 PG2789
Aseptoflex Vario Display unit -0.0124...0.25 10 30 18...32 7 PG2798
Aseptoflex Vario Display unit -1...1 10 30 18...32 7 PG2799
Aseptoflex Vario Display unit -0.05...1 10 30 18...32 7 PG2797
Aseptoflex Vario Display unit -0.124...2.5 20 50 18...32 7 PG2796
Accessories for level sensors PA, PG, PI, PN, PS, PY
Type Description Orderno.
Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006
Adapter · G ¼ - G ½ · Housing materials: stainless steel / FPM E30000
Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007
Welding adapter · Ø 50 mm · with Aseptoflex thread · Housing materials: stainless steel 316L / 1.4404 / O-ring: FPM FDA compliant E30052
Aseptoflex adapter · Clamp · 1-1.5“ · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33001
Level sensors
152Product selectors and further information can be found at: www.ifm.com
Accessories for level sensors LM
Type Description Orderno.
Welding adapter · G ½ - Ø 45 mm · collar · Housing materials: stainless steel 316L / 1.4404 E30056
Core colours
BN brown
GY grey
WH white
Wiring diagrams
1
L
L+
3 BU
4 BK
2 WH
1 BN
Out-OPOut 1
2:4:
2
L+
L3 BU
4 BK
2 WH
1 BN
Out-OPOut 2
4:2:
3
Out-OP / Out 4
3
4
2
5
6
Out 1
Out 3
L+1
n.c.7
Out 2
L
4
L+
LOUT1OUT2
4:2:
4
2
1
3
5
2
L
L+
4
1
3Out 1Out 2
4:2:
6
L+
L
n.c.
Out 4
Out 1
Out 2
1
2
4
6
7
3
Out 35
7
BN
GY
WH
L+
L
8
4
1
3
2L+
L
2
1
3
4L+
L
9
4
1
3
2
L+
L
L
P
2
L+
L
1
2
1
1: Normal operation, 2: Programming operation (P = communi-cation via EPS / FDT interface)
Level sensors
153
Scale drawings / drawing no. – CAD download: www.ifm.com
1
I1L
16
50
518
AI2
1 2
3
30,5
64
M12
x1
1: 7-segment LED display, 2: Programming buttons, 3: Housing con-nection with cable lug for cable 1.5 - 2.5 mm²
2
30,5
64
M12
x1
4 3I1L
16
50
57A
I2
32
1
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4:Housing connection (flat-pin connector 6.3 mm following DIN 46244)
3
30
63
M12
x1
G 43
8 6
32
I1
L
50
57A
I2
32
1
7887
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming buttons, 4: sealing
4
30
63
M12
x1
G 43
8 6
32
I1
L
50
57A
I2
32
1
7887
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming buttons, 4: sealing
5
100
27
6
119
34
14,5
2 3
36
1
48
36
47
85M
12x1
4 5
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4:Aseptoflex sealing edge, 5: Aseptoflex thread
Level sensors
154Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
7
24
3
153
16,8
100
2
1
57
60,5
M12
x1
G1
1: Analogue display, 2: 4-digit alphanumeric display, 3: Programmingbutton
Level sensors
155
For liquids and gases.
Special versions for food applications and hazardous areas.
Optional fittings for variable process connection.
Flow monitoring also for aggressive media.
Flow sensors
In almost all fields of process and plant engineering liquids or gases are used forcoolant and lubricant supply of machines and units, ventilation of installations andbuildings and the processing of products. In case of no flow of these mediaconsiderable damage and downtime may result. Thus it is very important to monitorthese media. In modern installations electronic flow monitors are used for thispurpose. They work without wear and tear and without mechanical components.This guarantees reliable monitoring even in case of difficult media over a longperiod.
Operating principle
Electronic flow sensors from ifm electronic operate with different measurementtechniques. They meet all requirements from a simple monitoring function to theexact detection of flow quantities.
Harmonised operating menus ensure that operators who use different flow sensorscan quickly and precisely carry out settings on the sensors. Some flow sensorsfeature an integrated temperature monitor which makes an additional measuringpoint unnecessary. This enables to control processes in the optimum operatingstatus especially with regard to energy savings.
Analogue, binary and pulse outputs offer various possibilities to process themeasured data. Due to the flexible programming by means of pushbuttons theflow sensors can be adapted to different conditions. The sensors are mounted viaadapters.
Monitoring very smallflow rates: Flow moni-tor with flow adapter.
Optimisedconsumption ofcompressed air.
Flow sensors
156Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Magnetic-inductive flow sensors with integrated temperature measurement (sealing material FKM) 158
Compact housings for adapters for flow monitoring 158
Compact designs for adapter with flow and temperature monitoring 159
Mechatronic flow sensors for liquids 159
Flow sensors for connection to control monitors, industrial applications 159
Control monitors for industrial applications 160
Air flow monitors 160
Compressed air meters 160 - 161
Compressed air meter for special gases 161
Inline sensor for small dosing quantities of water and aqueous solutions 161
Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils) 161 - 162
Accessories for flow sensors and control monitors 162
Accessories for volumetric flow sensors 162
Wiring diagrams 163
Scale drawings / drawing no. – CAD download: www.ifm.com 164
Flow sensors
157
Magnetic-inductive flow sensors with integrated temperature measurement (sealing materialFKM)
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA/ 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 2, 4, 5
G½ 0.25...25.00 -10...70 16 < 0.150 19...30 1 SM6000
G¾ 0.5...50.0 -10...70 16 < 0.150 19...30 2 SM7000
G1 0.7...100.0 -10...70 16 < 0.150 19...30 3 SM8000
Compact housings for adapters for flow monitoring
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 2 · Connector groups 2, 3, 4
3...300 / 200...3000 3...100 / 200...800 -25...80 30 1...10 19...36 4 SI5000
1/2“ UNF-Connector · Wiring diagram no. 3 · Connector group 9
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 85...265 5 SI5006*
M12 connector · Wiring diagram no. 4 · Connector groups 2, 3, 4
3...300 / - 3...100 -25...80 / - 300 1...10 19...36 6 SI5004
M12 connector · Wiring diagram no. 5 · Connector groups 2, 3, 4
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...2 / 1...10 19...36 6 SI5010
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Flow sensors
158Product selectors and further information can be found at: www.ifm.com
Compact designs for adapter with flow and temperature monitoring
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 6 · Connector groups 2, 3, 4
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 6 SI5007
Mechatronic flow sensors for liquids
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 7 · Connector groups 2, 3, 4
Rp ¾ 2...50 0...85 25 < 0.01 24 7 SBY334
Rp 1 5...100 0...85 25 < 0.01 24 8 SBY346
Rp 1½ 20...200 0...85 25 < 0.01 24 9 SBY357
Flow sensors for connection to control monitors, industrial applications
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Responsetime
[s]
Max. T0gradient
[K/min]
Pressurerating
[bar]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 8
3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 10 SF5200
Cable 6 m · Wiring diagram no. 9
3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 11 SF5350
3...300 / 200...3000 3...60 / 200...800 0...120 / 0...100 1...10 300 300 11 SF5300
Flow sensors
159You can find wiring diagrams from page 163
Control monitors for industrial applications
Type Ub /Tolerance
[V] / [%]
Currentconsumpt.
[mA]
Powerconsumpt.
[VA]
Power-ondelaytime[s]
Outputwhen flow is
present
Outputwhen
temperature is exceeded
Outputin case of
wire break
Draw-ingno.
Orderno.
Combicon connector · Wiring diagram no. 12
90...240 AC/ -5 /+10
– 4 10...80 relay energised relay energised relay de-energised 12 SN0150*
Combicon connector · Wiring diagram no. 13
24 DC / +10/ -20
90 – 10...80 relay energised relay energised relay de-energised 12 SR0150*
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, 1 =, Flow monitoring, 2 =, Wire break monitoring, 3 =, Temperature monitoring, 4 =,Power-on delay time, 5 =, Selection liquid / gas, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function aftera short circuit.
Air flow monitors
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Responsetime
[s]
Ub / tolerance
[V] / [%]
Draw-ingno.
Orderno.
Cable 2 m · Wiring diagram no. 10
100...1000 100...400 -10...50 3...60 80...250 AC/DC 13 SL0101*
Cable 2 m · Wiring diagram no. 11
100...1000 100...400 -10...50 3...60 24 DC ± 25 % 13 SL5101
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Compressed air meters
Type Processconnection
Setting range
[Nm3/h]
Accuracy withinmeasuring range
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mAscaleable) · Wiring diagram no. 14 · Connector groups 2, 4, 5
G¼ (DN8) 0.14...15.00A): ± (3% MW + 0.3%
MEW) / B): ± (6% MW +0.6% MEW) *
16 < 0.1 19...30 14 SD5000
Flow sensors
160Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Setting range
[Nm3/h]
Accuracy withinmeasuring range
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mAscaleable) · Wiring diagram no. 14 · Connector groups 2, 4, 5
R½ (DN15) 0.7...75.0A): ± (3% MW + 0.3%
MEW) / B): ± (6% MW +0.6% MEW) *
16 < 0.1 19...30 15 SD6000
R1 (DN25) 2.0...225.0A): ± (3% MW + 0.3%
MEW) / B): ± (6% MW +0.6% MEW) *
16 < 0.1 19...30 16 SD8000
R1½ (DN40) 3.5...410.0A): ± (3% MW + 0.3%
MEW) / B): ± (6% MW +0.6% MEW) *
16 < 0.1 19...30 17 SD9000
R2 (DN50) 6...700A): ± (3% MW + 0.3%
MEW) / B): ± (6% MW +0.6% MEW) *
16 < 0.1 19...30 18 SD2000
Compressed air meter for special gases
Type Processconnection
Setting range
[Nm3/h]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mAscaleable) · Wiring diagram no. 14 · Connector groups 2, 4, 5
R½ (DN15)Ar: 0.39 (0.4)...118.2 / CO2:0.24 (0.2)...71.7 / N2: 0.24
(0.2)...73.0 0...60 16 < 0.1 19...30 15 SD6100
Inline sensor for small dosing quantities of water and aqueous solutions
Type Processconnection
Measuring range
[ml/min]
Display range
[ml/min]
Pressurerating[bar]
Mediumtemp.[°C]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 14 · Connector groups 2, 4, 5
G1/8 1...200 0...240 10 0...60 19 SQ0500
Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils)
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA/ 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 2, 4, 5
G¾ 0.1...50.0 -10...80 16 < 0.250 19...30 20 SU7000
Flow sensors
161You can find wiring diagrams from page 163
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA/ 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 2, 4, 5
G1 0.2...100.0 -10...80 16 < 0.250 19...30 21 SU8000
G1¼ 0.4...200.0 -10...80 16 < 0.250 19...30 22 SU9000
Accessories for flow sensors and control monitors
Type Description Orderno.
Adapter · M18 x 1.5 - L18 · for mounting in T-pieces · Insertion depth of the probe of SID, SFD, TN: · 28.5 mm · Housing materials:nut: stainless steel 316Ti / 1.4571 / adapter: stainless steel 316L / 1.4404 / O-ring: FPM 16 x 1.5 gr 70° Shore A
E40104
Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404
E40101
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404
E40099
Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096
Welding adapter · M18 x 1.5 - Ø 24 mm · Insertion depth of the probe of SID, SFD, TN: · 15 mm · Housing materials: stainless steel316L / 1.4404
E40124
Accessories for volumetric flow sensors
Type Description Orderno.
Adapter · G ¾ I - R½ · for flow monitor type SM7 / SU7 · Housing materials: brass · Pack quantity: 2 E40151
Adapter · G 1 - R¾ · for flow monitor type SM8 / SU8 · Housing materials: brass · Pack quantity: 2 E40153
Flow sensors
162Product selectors and further information can be found at: www.ifm.com
Core colours
BN brown
BU blue
BK black
WH white
GY grey
Wiring diagrams
1
4
1
3
2 OUT2/InD
L+
L
BN
BU
OUT1
WH
BK
2
L+
L
1
4
3
3
1
3
4
2
5
n.c.
L1
N
Out
4
L+
L3
2
4
1
n.c.
n.c. = not connected
5
P
L+1
4
3
2
L
P = programming wire (forremote adjustment)
6
L
L+
3
2
4
1
S2 S1
7
3
L+
L
1
4
8
2 WH
1 BN
4 BK
3 BU
5 GY
9
BU
BK
BN
WH
GY
10
BN
WH
BU
BK
L1
N
L+
L
11
BN
WH
BU
BKL+
L
12
ACL
N
12
11
10
9
8
7
6
5
4
2
1
19
18
17
5
4
1
3
2
GY
BK
BN
BU
WH
20
21
22
23
24
1
2
35
4
1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas
13
12
11
10
9
8
7
6
5
4
2
1
19
18
17
5
4
1
3
2
GY
BK
BN
BU
WH
20
21
22
23
24
1
2
35
4
DCL+L
1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas
14
L+
LOut 2Out 1
2:4: 3
4
2
1
L
L+
Out 2Out 1
2:4: 3
4
2
1
Flow sensors
163
Scale drawings / drawing no. – CAD download: www.ifm.com
1
11073
M12 x1
16
G G2
1
21
M12 x1
54
2
G4
3
G4
3
11073
M12 x1
19
M12 x1
54
3
G1
G1
11073
M12 x1
19
M12 x1
54
4
22
1 2
3
113
60 65
14
7,7
45
50
27
63
M12
x1
1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm
5
22
1 2
113
60 65
14
8,2
45
50
27
63
" 20
UN
F 2
A2
1
3
1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm
6
22
1 2
113
60 65
14
8,2
45
50
27
63
M12
x1
3
1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm
7
113...123,576,5
32
97...
105,
5
1313
Rp
43
Rp
43
8
17 17
42
120...12991,5
106.
..112
Rp
1
Rp
1
Flow sensors
164Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
9
56
137...146,5121,5
121.
..127
,5
Rp
12
1
Rp
12
1
20 20
10
M12
x1
8272
22
14
8,2
44
19 1
1: internal thread M18 x 1.5
11
8672
22
14
8,2
44
19 1
1: internal thread M18 x 1.5
12
103,5
35,5
25
100
2
1
LEDs
LEDs
1 2 3 4
5 6 7 8
9 10 11 12
21 22 23 24
17 18 19 20
1: Potentiometer (switch point flow), 2: Potentiometer (switch pointtemperature)
13
140133
113
32
23
2 LED
pot.2 LED
14
182,3
21,3
M12
x1
100111
74,5
G1
4 /
45
1 2
G1
4 /
60 20
31
3
1: 4-digit alphanumeric display, 2: Programming buttons, 3: hole forM5 fixing screw
15
R
210300
16,1
21,3
M12
x1
100111
76,8
45
1 2
1: 4-digit alphanumeric display, 2: Programming buttons
16
475375
27,3
33,7
R 1
M12
x1
100111
88,5
45
1 2
1: 4-digit alphanumeric display, 2: Programming buttons
Flow sensors
165
Scale drawings / drawing no. – CAD download: www.ifm.com
1739
R11
2
275475
42
100111
M12
x1
120
45
1 2
1: 4-digit alphanumeric display, 2: Programming buttons
18
133
45
1 2
54
R2 51
100111
M12
x1
275475
1: 4-digit alphanumeric display, 2: Programming buttons
19
114
4,5
37
10M
12x1
100
125
111117
56
45
G8
1
48
65
1: 4-digit alphanumeric display, 2: Programming buttons, 3: flowconditioner
20
G4
3
G4
3
11096
100
80,5
M12
x1
installation length with pipe adapter E40151 / E40154: 185 mm
21
80,5
M12
x1
G1
13096
100
G1
installation length with pipe adapter E40152 / E40155: 205 mm,installation length with pipe adapter E40153 / E40156: 215 mm
22
80,5
M12
x1
26
48
13096
100
G1
41
G1
41
Flow sensors
166Product selectors and further information can be found at: www.ifm.com
Flow sensors
167
Transmitters or sensors with integrated control monitor.
Units with special design for hygienic applications.
Measuring principles with overload protection and a good long-term stability.
Measuring range from -1…600 bar.
Variable process connection and sealing technology via adapter.
Pressure sensors
ifm offers a wide range of electronic pressure and vacuum sensors to meet therequirements of various industrial applications. The ceramic-capacitive measuringcell, tried and tested a million times, is complemented by a stainless steel measuringcell with thick-film wire strain gauges (series PK, PV, PT) and a piezoresistivemeasuring technique (for pneumatic applications).
All units have robust housings and do not require moving parts such as pistons orsprings. The result: the sensors are extremely shock and vibration resistant andoperate without any wear or maintenance.
The tried and tested ceramic-capacitive measuring principle is corrosion-resistantand long-term stable. In the long run this guarantees continuous accuracy of themeasured values. The sensors are resistant to dynamic pressure peaks andguarantee high overload resistance even in the case of extreme pressure peaksthat occur for example with fast closing valves.
Units with wire strain gauge in thick-film technology on a stainless steel measuringcell are distinguished by their very compact and robust design. They can be usedin almost all industrial areas. The welded stainless steel measuring cell withoutany seals ensures a high degree of safety, in particular for applications with gaspressures of up to 400 bar as well as in air-conditioning and refrigerating technol-ogy where aggressive coolants (freons) are used.
Local display:the clearly readableLED display showsthe current systempressure.
Separate display /programming unit
PP2001.
Pressure sensors
168Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Sensors with switching outputs and analogue outputs and display 170
Sensors with switching outputs and display 171 - 172
PK sensors with mechanical setting and switching outputs 173
PT sensors for industrial applications with analogue outputs 173 - 174
PT sensors for mobile applications with analogue outputs 174 - 175
PA / PPA sensors for industrial applications with analogue outputs / AS-i 175 - 176
Part seat monitoring 176
Sensors for hydrostatic level monitoring 176
PNI sensors with analogue input 176
Sensors for pneumatic applications 177
PI sensors for hygienic and wet areas, 2-wire with analogue output 177 - 178
PI sensors for hygienic and wet areas with switching and analogue output 178
Electronic contact manometers for hygienic and wet areas with switching output and analogue output 178 - 179
PF sensors for hygienic and wet areas with switching and analogue output 179
PL / PM sensors without display for hygienic and wet areas with analogue output 179
Fixing components for pressure sensors 179
Accessories and software 180
Adapters and accessories for adapters 180
Flange adapters 180
Wiring diagrams 180 - 181
Scale drawings / drawing no. – CAD download: www.ifm.com 181 - 184
Pressure sensors
169
Sensors with switching outputs and analogue outputs and display
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 xanalogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 9 · Connector groups 2, 3, 4
G¼ I Display unit 0...400 600 1000 20...30 1 PN2020
G¼ I Display unit 0...250 400 850 20...30 2 PN2021
G¼ I Display unit 0...100 300 650 20...30 2 PN2022
G¼ I Display unit -1...25 100 350 20...30 2 PN2023
G¼ I Display unit -1...10 75 150 20...30 2 PN2024
G¼ I Display unit -0.125...2.5 20 50 20...30 2 PN2026
G¼ I Display unit -0.05...1 10 30 20...30 2 PN2027
G¼ I Display unit -1...1 20 50 20...30 2 PN2009
G¼ I Display unit -0.0125...0.25 10 30 20...30 2 PN2028
M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · Wiring diagram no. 1 · Connectorgroups 2, 3, 4
G¼ I Display unit 0...600 800 1200 18...36 3 PN3060
G¼ I Display unit 0...250 400 850 18...36 4 PN3001
G¼ I Display unit 0...25 150 350 18...36 4 PN3003
G¼ I Display unit -1...10 75 150 18...36 4 PN3004
Pressure sensors
170Product selectors and further information can be found at: www.ifm.com
Sensors with switching outputs and display
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 2, 3, 4
G¼ I Display unit 0...400 600 1000 18...36 3 PN5000
G¼ I Display unit 0...250 400 850 18...36 4 PN5001
G¼ I Display unit 0...100 300 650 18...36 4 PN5002
G¼ I Display unit 0...25 150 350 18...36 4 PN5003
G¼ I Display unit -1...10 75 150 18...36 4 PN5004
G¼ I Display unit 0...2.5 20 50 18...36 4 PN5006
G¼ I Display unit 0...1 10 30 18...36 4 PN5007
¼’’ NPT Display unit 0...400 600 1000 18...36 5 PN5200
¼’’ NPT Display unit 0...250 400 850 18...36 6 PN5201
¼’’ NPT Display unit 0...100 300 650 18...36 6 PN5202
¼’’ NPT Display unit 0...25 150 350 18...36 6 PN5203
¼’’ NPT Display unit -1...10 75 150 18...36 6 PN5204
¼’’ NPT Display unit 0...2.5 20 50 18...36 6 PN5206
¼’’ NPT Display unit 0...1 10 30 18...36 6 PN5207
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 10 · Connector groups 2, 4, 5
G¼ I Display unit 0...600 800 1200 18...36 3 PN7060
Pressure sensors
171You can find wiring diagrams from page 180
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 10 · Connector groups 2, 4, 5
G¼ I Display unit 0...400 600 1000 18...36 3 PN7000
G¼ I Display unit 0...250 400 850 18...36 4 PN7001
G¼ I Display unit 0...100 300 650 18...36 4 PN7002
G¼ I Display unit 0...25 150 350 18...36 4 PN7003
G¼ I Display unit -1...10 75 150 18...36 4 PN7004
G¼ I Display unit 0...2.5 20 50 18...36 4 PN7006
G¼ I Display unit 0...1 10 30 18...36 4 PN7007
G¼ I Display unit -1...1 20 50 18...36 4 PN7009
¼’’ NPT Display unit 0...400 600 1000 18...36 5 PN7200
¼’’ NPT Display unit 0...250 400 850 18...36 6 PN7201
¼’’ NPT Display unit 0...100 300 650 18...36 6 PN7202
¼’’ NPT Display unit 0...25 150 350 18...36 6 PN7203
¼’’ NPT Display unit -1...10 75 150 18...36 6 PN7204
¼’’ NPT Display unit 0...2.5 20 50 18...36 6 PN7206
¼’’ NPT Display unit 0...1 10 30 18...36 6 PN7207
¼’’ NPT Display unit -1...1 20 50 18...36 6 PN7209
Pressure sensors
172Product selectors and further information can be found at: www.ifm.com
PK sensors with mechanical setting and switching outputs
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 3 · Connector groups 2, 4,5
G¼ A / M5 I Operation 0...400 600 1600 9.6...32 7 PK6520
G¼ A / M5 I Operation 0...250 400 1000 9.6...32 7 PK6521
G¼ A / M5 I Operation 0...100 200 1000 9.6...32 7 PK6522
G¼ A / M5 I Operation 0...25 60 500 9.6...32 7 PK6523
G¼ A / M5 I Operation 0...10 25 300 9.6...32 7 PK6524
R¼ A / M5 I Operation 0...400 600 1600 9.6...32 8 PK6730
R¼ A / M5 I Operation 0...250 400 1000 9.6...32 8 PK6731
R¼ A / M5 I Operation 0...100 200 1000 9.6...32 8 PK6732
R¼ A / M5 I Operation 0...10 25 300 9.6...32 8 PK6734
¼’’NPT A / M5 I Operation 0...400 600 1600 9.6...32 9 PK6220
¼’’NPT A / M5 I Operation 0...100 200 1000 9.6...32 9 PK6222
¼’’NPT A / M5 I Operation 0...10 25 300 9.6...32 9 PK6224
PT sensors for industrial applications with analogue outputs
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 4 · Connector groups 2, 4
G¼ A – 0...400 600 1600 8.5...36 10 PT3540
Pressure sensors
173You can find wiring diagrams from page 180
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 4 · Connector groups 2, 4
G¼ A – 0...250 400 1000 8.5...36 10 PT3541
G¼ A – 0...100 200 1000 8.5...36 10 PT3542
G¼ A – 0...25 60 600 8.5...36 10 PT3543
G¼ A – 0...10 25 300 8.5...36 10 PT3544
M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 5 · Connector groups 2, 4
G¼ A – 0...400 600 1600 16...36 10 PT9540
G¼ A – 0...250 400 1000 16...36 10 PT9541
G¼ A – 0...100 200 1000 16...36 10 PT9542
G¼ A – 0...25 60 600 16...36 10 PT9543
G¼ A – 0...10 25 300 16...36 10 PT9544
PT sensors for mobile applications with analogue outputs
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 4
G¼ A – 0...400 600 1600 8.5...36 10 PT3550
G¼ A – 0...250 400 1000 8.5...36 10 PT3551
G¼ A – 0...100 200 1000 8.5...36 10 PT3552
G¼ A – 0...25 60 600 8.5...36 10 PT3553
Pressure sensors
174Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 4
G¼ A – 0...10 25 300 8.5...36 10 PT3554
M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 5
G¼ A – 0...400 600 1600 16...36 10 PT9550
G¼ A – 0...250 400 1000 16...36 10 PT9551
G¼ A – 0...100 200 1000 16...36 10 PT9552
G¼ A – 0...25 60 600 16...36 10 PT9553
G¼ A – 0...10 25 300 16...36 10 PT9554
PA / PPA sensors for industrial applications with analogue outputs / AS-i
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 4 · Connector groups 2, 4
G¼ I – 0...400 600 1000 9.6...32 11 PA3020
G¼ I – 0...250 400 850 9.6...32 11 PA3021
G¼ I – 0...100 300 650 9.6...32 12 PA3022
G¼ I – 0...25 150 350 9.6...32 12 PA3023
G¼ I – 0...10 75 150 9.6...32 12 PA3024
G¼ I – 0...2.5 20 50 9.6...32 12 PA3026
G¼ I – 0...1 10 30 9.6...32 12 PA3027
Pressure sensors
175You can find wiring diagrams from page 180
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 4 · Connector groups 2, 4
G¼ I – -1...0 10 30 9.6...32 12 PA3029
M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 5 · Connector groups 2, 4
G¼ I – 0...250 400 850 16...32 12 PA9021
G¼ I – 0...10 75 150 16...32 12 PA9024
Part seat monitoring
Type Description Orderno.
Control unit for part seat monitoring · Setting by adjustment of the pneumatic bridge · Integrated pressure sensor with 2 switchingoutputs · and 4-digit alphanumerical display for trend display or display of current pressure · Cable
PS7570
Sensors for hydrostatic level monitoring
Type Measuringrange[bar]
Cable length /material
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
Output 4...20 mA analogue · Wiring diagram no. 6
0...0.253 m
PUR cable2 2.4 10...30 13 PS3208
0...0.610 m
PUR cable4 4.8 10...30 13 PS3407
0...112 m
PUR cable5 6 10...30 13 PS3417
PNI sensors with analogue input
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 7
G¼ I Display unit 0...10 50 150 18...30 4 PNI024
Pressure sensors
176Product selectors and further information can be found at: www.ifm.com
Sensors for pneumatic applications
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M8 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP · Wiring diagram no. 8 · Connector group 1
G 1/8 I Display unit -1...1 20 30 18...32 14 PQ7809
G 1/8 I Display unit -1...10 20 30 18...32 14 PQ7834
PI sensors for hygienic and wet areas, 2-wire with analogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 (20...4) mA analogue (scaleable 1:4) · DC · Wiring diagram no. 11 · Connector groups 2, 3, 4
Aseptoflex Display unit -1...25 100 350 20...32 15 PI1093
Aseptoflex Display unit -1...10 50 150 20...32 15 PI1094
Aseptoflex Display unit -1...4 30 100 20...32 15 PI1095
Aseptoflex Display unit -0.124...2.5 20 50 20...32 15 PI1096
Aseptoflex Display unit -0.05...1 10 30 20...32 15 PI1097
Aseptoflex Display unit -0.0124...0.25 10 30 20...32 15 PI1098
Aseptoflex Display unit -1...1 10 30 20...32 15 PI1099
G1 A Display unit -1...25 100 350 20...32 16 PI1693
G1 A Display unit -1...10 50 150 20...32 16 PI1694
G1 A Display unit -0.124...2.5 20 50 20...32 16 PI1696
G1 A Display unit -0.05...1 10 30 20...32 16 PI1697
Pressure sensors
177You can find wiring diagrams from page 180
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 (20...4) mA analogue (scaleable 1:4) · DC · Wiring diagram no. 11 · Connector groups 2, 3, 4
G1 A Display unit -0.0124...0.25 10 30 20...32 16 PI1698
PI sensors for hygienic and wet areas with switching and analogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · DC PNP/NPN ·Wiring diagram no. 12 · Connector groups 2, 3, 4
Aseptoflex Display unit -1...10 50 150 18...32 15 PI2094
Aseptoflex Display unit -0.124...2.5 20 50 18...32 15 PI2096
Aseptoflex Display unit -0.05...1 10 30 18...32 15 PI2097
Aseptoflex Display unit -0.0124...0.25 10 30 18...32 15 PI2098
Electronic contact manometers for hygienic and wet areas with switching output andanalogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DCPNP/NPN · Wiring diagram no. 12 · Connector groups 2, 3, 4
Aseptoflex Vario Display unit -1...25 100 350 18...32 17 PG2793
Aseptoflex Vario Display unit -1...10 50 150 18...32 17 PG2794
Aseptoflex Vario Display unit -1...4 30 100 18...32 17 PG2795
Aseptoflex Vario Display unit -0.124...2.5 20 50 18...32 17 PG2796
Aseptoflex Vario Display unit -0.05...1 10 30 18...32 17 PG2797
Aseptoflex Vario Display unit -0.0124...0.25 10 30 18...32 17 PG2798
Pressure sensors
178Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DCPNP/NPN · Wiring diagram no. 12 · Connector groups 2, 3, 4
Aseptoflex Vario Display unit -1...1 10 30 18...32 17 PG2799
Aseptoflex Vario Display unit -0.005...0.1 4 30 18...32 17 PG2789
PF sensors for hygienic and wet areas with switching and analogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 xanalogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 9 · Connector groups 2, 3, 4
Aseptoflex Switching status -0.5...10 50 150 20...30 18 PF2054
PL / PM sensors without display for hygienic and wet areas with analogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 13 · Connector groups 2, 4
Aseptoflex – -0.0125...0.25 10 30 14...30 19 PM2058
M12 connector · Output function 4...20 mA analogue · 3-wire DC; 2-wire DC · Wiring diagram no. 13 · Connector groups 2, 4
G1 A – -0.05...1 10 30 14...30 20 PM2657
G1 A – -0.0125...0.25 10 30 14...30 20 PM2658
Fixing components for pressure sensors
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PA E10193
Pressure sensors
179You can find wiring diagrams from page 180
Accessories and software
Type Description Orderno.
Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006
Adapters and accessories for adapters
Type Description Orderno.
Adapter · G ¼ - G ½ · Housing materials: stainless steel / FPM E30000
Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007
Flange adapters
Type Description Orderno.
Aseptoflex adapter · Clamp · 1-1.5“ · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33001
Aseptoflex adapter · Clamp · 2“ · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33002
Welding adapter · Ø 50 mm · with Aseptoflex thread · Housing materials: stainless steel 316L / 1.4404 / O-ring: FPM FDA compliant E30052
Welding adapter · G 1 - Ø 50 mm · Housing materials: stainless steel 316L / 1.4404 E30013
Core colours
BN brown
GY grey
WH white
Wiring diagrams
1
L+
L3 BU
4 BK
2 WH
1 BN
2
L+
L
1
4
3
3
4
L
L+1
2
32:4:
4
L+
L
1
2
Pressure sensors
180Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
5
L+
L
1
3
2
6
BN
GY
WH
L+
L
7
L+
L
Uref
Out 1
Out 2
In
In+
1
2
3
5
6
7
4
OU2
OU1
+InP2
10 V
8
2
L
L+
4
1
3Out 1Out 2
4:2:
9
4
L
L+
2
1
3Out 1Out 2
4:2:
4
L
L+
2
1
3Out 1Out 2
4:2:
4
1
3
2L+
LOut 1Out 2
4:2:
2
1
3
4L+
LOut 1Out 2
4:2:
10
Out 1Out 2
4
L
L+
2
1
34:2:
4
L
L+
2
1
3Out 1Out 2
4:2:
11
4
1
3
2
L+
L
L
P
2
L+
L
1
2
1
1: Normal operation, 2: Programming operation (P = communi-cation via EPS / FDT interface)
12
4
1
3
2L+
L
2
1
3
4L+
L
13
L+
L
1
2
L+
L
1
3
2
Scale drawings / drawing no. – CAD download: www.ifm.com
1
30
47,8
59,6
G
M12
x1
16,5
1 4/
94,1
34
27
1,3
21,5
2 3
1
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming button
2
91,5
34
27
1,3
21,5
2 3
1
30
47
57,3
G
M12
x1
14
1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming button
Pressure sensors
181
Scale drawings / drawing no. – CAD download: www.ifm.com
3
30
48
59,6
G
M12
x1
16,5
1 4/
94,1
34
27
1,3
21,5
2 3
1
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming button
4
91,5
34
27
1,3
21,5
2 3
1
30
48
57,3
G
M12
x1
14
1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming button
5
30
48
59,8
M12
x1
12
''NPT1 4/
94
34
27
2 3
1
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming button
6
91,5
34
27
2 3
1
30
48
57,3
M12
x1
12
''NPT1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming button
7
61,6
12
M12 x127
27
71,6
G1 4/
M5
7,5
2
1
1: tightening torque 25 Nm, 2: sealing FPM / DIN 3869-14
860
,613
R 41
M12 x127
27
70,6
M5
7,5
1
1: tightening torque 25 Nm
9
60,6
13
M12 x127
27
70,6
M5
7,5
" NPT411
1: tightening torque 25 Nm
Pressure sensors
182Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
10
22
1
51,2
12
G1 4/
65,1
M12 x122
1: sealing FPM / DIN 3869-14, tightening torque 25 Nm
11
75
M12 x130
30
27
1,3
21,5
14
G 41
1: Pressure relief mechanism, No mechanical force must be exertedon the pressure relief mechanism.
12
75
M12 x130
30
27
1,3
21,5
14
G 41
13
100
27
14
4,2
354,75
3220
4232
30
20,7
11,3
1: main pressure connection G 1/8; tightening torque max. 8 Nm,thread length max: 7.5 mm, 2: for mounting screw M4; max. tighte-ning torque 2.5 Nm, 3: LEDs (display unit / switching status), 4: 4-digit alphanumeric display, 5: Programming button
15
119
34
14,5
2 3
36
1
48
36
47
85M
12x1
4 5
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4:Aseptoflex sealing edge, 5: Aseptoflex thread
16
G1
25,4
119
41
34
2 348
27
1
47
85M
12x1
20°
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button
Pressure sensors
183
Scale drawings / drawing no. – CAD download: www.ifm.com
17
24
3
153
16,8
100
2
1
57
60,5
M12
x1
G1
1: Analogue display, 2: 4-digit alphanumeric display, 3: Programmingbutton
18
85,5
34
15
48
36
1 2
3
46,5
51M
12x1
4
1: 7-segment LED display, 2: Programming button, 3: Aseptoflex sea-ling edge, 4: Aseptoflex thread
19
36
107
34
15
M12 x1
121,
5
48
1 2
1: Aseptoflex sealing edge, 2: Aseptoflex thread
20
41 20°1
117,
3
34M12 x1
131,
5
48
27
G1
25,4
1: tightening torque 20 Nm
Pressure sensors
184Product selectors and further information can be found at: www.ifm.com
Pressure sensors
185
Increased process safety due to self-monitoring.
Integrated or separate control monitors selectable.
Modular concept –tailor-made for every application.
Optional fittings for variable connection.
Robust construction for high resistanceto shock and vibration.
Temperature sensors
The temperature sensors of ifm electronic are based on a PT100 or PT1000 resistor.The measured temperature value corresponds to a change in resistance and is con-verted into an electrical analogue signal. A microprocessor controls the evaluationof the electrical signal. The current system temperature is indicated by LEDs directlyon the control monitor.
The microprocessor and the display make process adjustment much easier. The usercan set the values for the switch points, hysteresis and measuring range by meansof programming buttons even without the system temperature being applied. Thisenables installation and setup of the system within a few minutes. The values aresafely stored in an EEPROM independent of the supply voltage.
Film technology is used for the electronic circuitry. A flexible, temperature-resistantand extremely resistant polyimide film is used as carrier of the SMD components.Together with a special potting method an extreme shock and vibration resistance isachieved.
From sensor to system
A complete temperature measurement system usually consists of severalcomponents. The temperature in a medium is detected by a sensor and is convertedinto an electrical measured signal. The mechanical design and the dimensions ofthe sensors must vary to enable use for different media and measuring points.Depending on the application ifm electronic offers a selection of robust probe sen-sors or types with connection cables. To indicate and process the measured valuethe sensor is connected to a separate control monitor. It indicates the measuredvalue on its integrated display. To complete the modular systems ifm electronicoffers compact temperature sensors with integrated control monitors. If a local tem-perature display is not required, temperature transmitters are frequently used.ifm electronic provides units with excellent response time (TA series) that eitherhave standard output signals or an integrated AS-i interface. In hygienic applicationsthe self-monitoring, calibration-free temperature transmitter TAD is an excellentchoice.
Local display of thecurrent temperature.
Imperative: tempera-ture monitoring in air
conditioning.
Temperature sensors
186Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Compact temperature sensors 188
Control monitors for temperature sensors, IO-Link 188
Pt1000 probe sensors for standard applications 188
Temperature transmitters for standard applications 188
Probe sensors for hygienic and wet areas 189
Temperature transmitters for hygienic and wet areas 189
Accessories for temperature sensors TN / TR 189
Adapters 189 - 190
Hygienic adapters 190
Wiring diagrams 190
Scale drawings / drawing no. – CAD download: www.ifm.com 191
Temperature sensors
187
Compact temperature sensors
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 1 · Connector groups 2, 4,5
-25...140 G¼ A 39 9.6...32 1 / 3 1 TK6130
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 2, 4, 5
-25...140 G¼ A 39 9.6...32 1 / 3 1 TK7130
Control monitors for temperature sensors, IO-Link
Type Measuringrange[°C]
Processconnection
Display
LED
Ub
[V]
Currentconsump.
[mA]
Iload
[mA]
Drawingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DCPNP/NPN · Wiring diagram no. 4 · Connector groups 2, 3, 4
-40...300 G½ A Display unit 18...32 50 250 2 TR2432
Pt1000 probe sensors for standard applications
Type Measuringrange[°C]
Diameter
[mm]
Probe length
[mm]
Sensorelement
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · Wiring diagram no. 3
-40...150 6 260 1 x Pt 1000 1 / 3 3 TT2250
Temperature transmitters for standard applications
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · DC · Connector groups 2, 4
-50...150 G¼ A 60 10...30 1 / 3 4 TA3131
0...140 G¼ A 60 10...30 1 / 3 4 TA3130
Temperature sensors
188Product selectors and further information can be found at: www.ifm.com
Probe sensors for hygienic and wet areas
Type Measuringrange[°C]
Diameter
[mm]
Probe length
[mm]
Sensorelement
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · Connector groups 2, 4
-40...150 10 110 1 x Pt 1000 1 / 3 5 TT0061
Temperature transmitters for hygienic and wet areas
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · DC · Connector groups 2, 4
0...140 G½ A 87.5 10...30 1 / 3 6 TA3430
-10...150 G½ A 87.5 10...30 1 / 3 6 TA3431
Accessories for temperature sensors TN / TR
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PA E10193
Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006
Adapters
Type Description Orderno.
Welding adapter · M18 x 1.5 - Ø 24 mm · Insertion depth of the probe of SID, SFD, TN: · 15 mm · Housing materials: stainless steel316L / 1.4404
E40124
Adapter · M18 x 1.5 - L18 · for mounting in T-pieces · Insertion depth of the probe of SID, SFD, TN: · 28.5 mm · Housing materials:nut: stainless steel 316Ti / 1.4571 / adapter: stainless steel 316L / 1.4404 / O-ring: FPM 16 x 1.5 gr 70° Shore A
E40104
Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404
E40101
Temperature sensors
189You can find wiring diagrams from page 190
Type Description Orderno.
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404
E40099
Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096
Hygienic adapters
Type Description Orderno.
Welding adapter · G ½ - Ø 45 mm · collar · Housing materials: stainless steel 316L / 1.4404 E30056
Wiring diagrams
1
4
L
L+1
2
32:4:
2
2
L
L+
4
1
3Out 1Out 2
4:2:
3
1
2
3
4
4
L+
L
1 BN
2 WH
4 BK
3 BUTR 2432
1
2
3
4
2
B
1
2
3
4
3
1
1
2
3
4
B
B
1: Two-wire sensor, 2: Three-wire sensor, 3: Four-wire sensor, B:link
Temperature sensors
190Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
1
39
M12 x127
27
96,5
25
8,2
G 41
87
2
93
34
16,5
G 21
2 3
1
30
48
60M
12x1
4
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4:connection for temperature sensor
3
18,5
L
5,95
M12
x1
21,5
40
1
6,2 13,8
6
1: plug area
4
4460
8,2
M12x130
27
13,7
117,
7
13,5
G 41
5
8
L
10
M12
x1
21,5
18,5
40
1
1: plug area
6
G 21
43,8 123
8,2
10
M12
x130
27
18,3
13,7
47,5
180,5
LED
87,5
Temperature sensors
191
Online vibration diagnosis – optimumprice / performance ratio.
Decentralised monitoring of plant and equipment integrated into the machine.
Compact field units and modular control cabinet units.
Digital and analogue alarm outputs.
Standard data interface (OPC).
Diagnostic systems
efector octavis is a vibration monitor which not only detects vibration data, but alsocarries out signal analysis and machine diagnosis directly on the machine. Themachine condition is determined and is forwarded to the PLC or to SCADAsoftware. It fulfils the main requirements for modern machine monitoring: compati-bility, modularity and transferable configuration.
Compatible and modular
The compatibility with data structures such as the OPC interface makes it possibleto integrate condition data into a higher-level system. With the requirement formodularity the user can define the extent of condition monitoring to be implemen-ted – this means the complete range of diagnosis is possible right from the “firstunit”. Transferable configuration is attained with application-related parameter sets.A wizard function in the software guides the user through creating, managing andarchiving the monitoring parameters.
Trend memory
All units of the octavis family type VE / VSE feature an internal trend memory whichensures detailed analysis and optimisation of the application even without externaldata recording. The storage intervals are freely selectable. This means that thestorage length of the non volatile ring buffer is adjusted to the requirements.
The suitable system for your application:
– Standard vibration characteristic values / permanent machine protection: VSE, VE, VK, VT
– Internal trend memory / root cause analysis: VSE, VE
– Online diagnosis / early damage detection: VSE (VE partly)
– Network capability of the system: VSE (VE partly*)
– Load meter: VSE
*Profibus DP gateway
Internal trend memory(type VE / VSE) of allmonitored diagnosisfactors can be evalu-ated via PC software.
Easy vibrationmonitoring: Type VK
provides a com-bination of switching
output and trans-mitter function in
conjunction with thetried and tested
easy-turn concept.
Diagnostic systems
192Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK 194
Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE 194
Connection cables VSE 194
Vibration sensors for connection to external diagnostic electronics VSE - type VSA 194
Scale drawings / drawing no. – CAD download: www.ifm.com 194 - 195
Diagnostic systems
193
Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK
Type Description Draw-ingno.
Orderno.
Vibration monitor · Connection via M12 connector · Vibration monitor to DIN ISO 10816 · Measuring range Veff: 0...25mm/s · Switching outputs: normally closed and analogue 4...20 mA · PBT / PC / FPM / stainless steel 316L / 1.4404
1 VKV021
Vibration monitor · Connection via M12 connector · Vibration monitor to DIN ISO 10816 · Measuring range Veff: 0...50mm/s · Switching outputs: normally closed and analogue 4...20 mA · PBT / PC / FPM / stainless steel 316L / 1.4404
1 VKV022
Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE
Type Description Draw-ingno.
Orderno.
Diagnostic electronics for vibration sensors · Ethernet interface · Switching output, Analogue output · Combiconconnection · PA
2 VSE002
Connection cables VSE
Type Description Orderno.
Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080
Vibration sensors for connection to external diagnostic electronics VSE - type VSA
Type Description Draw-ingno.
Orderno.
Vibration sensor · for connection to external diagnostic electronics · Connector · housing: stainless steel 316L / 1.4404 3 VSA001
Scale drawings / drawing no. – CAD download: www.ifm.com
1
63,7
11
M12 x127
27
73,1
M81
1: tightening torque 15 Nm
2
103,4
35,5
25,4
100
1
LEDs
1: Ethernet interface
Diagnostic systems
194Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
3
18,5
M8
x1,2
5
M12
x117
5324
178
1
1: conical angle = 90°
Diagnostic systems
195
Manufacturer-independent standard.
Worldwide acceptance as a wiring system.
Communication from the sensor to the controller.
“Safety at Work” for safety-related applications.
Intelligent system solutions for special tasks.
Bus system AS-interface
AS-interface (AS-i = actuator sensor interface) is a manufacturer-independent stan-dard for the connection of actuators and sensors of the first field level. It is the onlywiring system accepted worldwide. With 15 million slaves installed AS-i has beentried and tested as a low-cost feeder for all common fieldbuses for many years.
The product range includes AS-i components for different areas from packagingand conveying via silo applications, machine tools, robotics and automation to thefood industry and mobile vehicles.
Safe
The sophisticated AS-i technology and the extended diagnostic possibilities providehigh reliability and machine uptime.
“Safety at Work” is the extension of the AS-interface by safety-related components.Safety components up to the highest control category 4 to EN 954-1, SIL 3 to IEC61508 and EN ISO 13849 - 1 / PL e can be connected to AS-i.
Easy
Due to the standardised system, the low wiring complexity and the quick connec-tion technology, AS-i enables simple “Plug & Play”. The reduction of terminals leadsto reduced documentation.
Data and energy are jointly transmitted via a two-wire cable. The reverse polarityprotected insulation displacement technology helps avoid errors. The modularityand the tree structure smoothly fit to the way the plant is put together.
Cost-optimised
It’s the end result that matters: Wiring complexity, documentation and set-up timesare significantly reduced. The decentralisation of the AS-i participants leads tosmaller and less expensive control cabinets. Simple diagnosis and a clear systemdesign result in high machine uptime and avoid downtimes.
With “Safety atWork” AS-i alsosolves safety-related tasks.
Reduced cost:reduced wiring com-
plexity for fasterinstallation and fewer
error sources.
Bus system AS-interface
196Product selectors and further information can be found at: www.ifm.com
Selection chart Page
AS-i repeaters 198
AS-i power supplies 198
I/O modules for control cabinets 198
Field modules IP67 198
Field modules IP69K and accessories 199
Module lower parts 199
Pneumatic and actuator solutions 199
AS-i sensors 199
Combicon connectors 199
Flat cable splitters and accessories 200
Accessories lower parts and addressing units 200
Scale drawings / drawing no. – CAD download: www.ifm.com 200 - 201
Bus system AS-interface
197
AS-i repeaters
Type Description Draw-ingno.
Orderno.
AS-i repeater · Extension of the AS-i network by another 100 m · One additional AS-i power supply necessary · Combiconconnection · PA 6.6
– AC2225
Passive AS-i bus termination · Extension of the cable to a maximum of 200 m without additional repeater · Improvementof the signal quality · Monitoring of the supply voltage by means of LEDs
– AC1147
AS-i power supplies
Type OutputcurrentAS-i [A]
Description Draw-ingno.
Orderno.
8Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivate
the AS-i communication · 240 watts · aluminium / steel sheet galvanised1 AC1218
I/O modules for control cabinets
Type Inputs /outputs
Description Draw-ingno.
Orderno.
4 inputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 with
extended addressing mode · Digital inputs · Combicon connection · PA2 AC2250
4 inputs / 3 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 withextended addressing mode · Digital inputs and outputs · Combicon connection · PA
2 AC2264
4 inputs / 4 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 · Digital
inputs and outputs · Combicon connection · PA2 AC2251
4 inputs / 4 outputs;bidirectional
Active AS-i module · String mounting possible · Addressing socket · External sensor supplyPELV · Version 2.1 · Digital inputs and outputs · Combicon connection · PA
2 AC2257
4 outputs 0...20 mAActive AS-i module · AS-i profile S-7.3 · 4 analogue outputs 0...20 mA · For the
connection of 2-wire actuators or 4-wire actuators with separate 24 V supply · Combiconconnector for actuator connection · PA 6.6
2 AC2218
Field modules IP67
Type Inputs /outputs
Description Draw-ingno.
Orderno.
4 outputsActive CompactLine module · IR addressing possible · Digital outputs · Sockets M12 x 1 ·
PA3 AC2417
Bus system AS-interface
198Product selectors and further information can be found at: www.ifm.com
Field modules IP69K and accessories
Type Inputs /outputs
Description Draw-ingno.
Orderno.
4 inputs / 3 outputsActive ProcessLine module · Version 2.1 with extended addressing mode · Protection
rating IP 69K · high-grade stainless steel · Digital inputs and outputs · Sockets M12 x 1 ·high-grade stainless steel / Makrolon / O-ring: EPDM
4 AC2904
Module lower parts
Type Inputs /outputs
Description Draw-ingno.
Orderno.
FC coupling moduleModule lower part flat cable · AS-i interface to module upper part · Quick mounting
technology for AS-i flat cable · PBT5 AC5000
FC-E coupling module withexternal power supply
FC-E coupling module · AS-i interface to module upper part · Quick mounting technologyfor AS-i flat cable · PBT
5 AC5003
FC coupling moduleModule lower part flat cable · with addressing plug · AS-i interface to module upper part ·
Quick mounting technology for AS-i flat cable · PBT6 AC5010
Pneumatic and actuator solutions
Type Inputs /outputs
Description Draw-ingno.
Orderno.
2 inputs / 1 output NO/NCselectable (monostable)
AS-i AirBox · Connection to the pneumatic system by tube fittings · 1 x 2 or 2 x 1 digitalinputs · 1 pneumatic output (NO/NC selectable) · Sockets M12 x 1 · housing: PBT / Metal
parts: stainless steel / sealing: Viton7 AC2057
AS-i sensors
Type Description Draw-ingno.
Orderno.
Inductive sensor · IIK2022-ASI/M/US · M30 x 1.5 · Sensing range 22 mm · gold-plated contacts · Connector · V4A / activeface: LCP uncoloured
8 IIC221
Inductive sensor · IMC2015-ASI/US · Sensing range 15 mm · Sensing face in 5 positions selectable · Connector · PBT / PPE 9 IM5118
Combicon connectors
Type Description Orderno.
Combicon connector · with screw terminals 4-pole · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity:100
E70231
Bus system AS-interface
199You can find wiring diagrams and scale drawings from page 200
Flat cable splitters and accessories
Type Description Orderno.
FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: PA 6-GF-FR / brass nickel-plated AC5005
Accessories lower parts and addressing units
Type Description Orderno.
AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lowerparts and compact modules
AC4000
AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lowerparts and compact modules
AC4002
Scale drawings / drawing no. – CAD download: www.ifm.com
1
4
10796
91
124
131
Jumper
LED
2
105
35,5
25
114
LEDs
1
1: Addressing socket
3
2327
54,
5
M12x1
1 2
43
4,7
107
118,
2
28,539
7,5
60
4
M12
x1
43,6
80137,3
M12 x1 LED
Bus system AS-interface
200Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
5
80
206
35
66
31
9,65,3
45
7 7
77
6
80
206
35
66
31
9,65,3
45
7 7
77
1
1: Addressing socket
7
M12 x1
45
LED8 mm
4 mm
5
50 52
80
8
49
28
M30
x1,5
5
47
60
M12
x1
LED 4 x 90°
15
36
9
40
66
40
54
M12
x130
30 2
2
1
46
46
5,5
5,5
29,5
1: LED yellow, 2: LED green
Bus system AS-interface
201
Controllers, I/O modules, displaysand sensors for mobile applications.
Compact and extremely robust design.
Extensive range of accessories forinstallation and diagnostics.
CAN interface with CANopen protocol.
e1 type approval of the GermanFederal Office for Motor Traffic.
Control technology for mobile applications
Life today cannot be imagined without electronics in modern motor vehicles andmobile machines. Many necessary and convenient functions could not beimplemented without electronic support. In contrast to electronics in consumergoods and “normal” industrial applications such as packaging machines and con-veyors the requirements for components for mobile applications are much higher.
Electronic requirements
The components need to be carefully selected, mainly because of the extrememechanical stress caused by impacts and shocks and the use at extreme operatingtemperatures. The direct influence of dirt, humidity and water often cannot beexcluded in field applications. Therefore a high protection rating and a specialselection of the materials are required for the devices.
In addition to mechanical and environmental influences, electrical interferenceaffecting the whole system as well as individual devices, have to be taken intoaccount. A wide supply voltage range and well-adapted protective measures ensuresafe operation of the devices even in case of large voltage fluctuations by thebattery / generator system. Strong conducted or radiated interference must notinfluence the function either.
For device networking the CAN bus has become the successful standard in the lastfew years. Whereas for the high volume production of passenger cars special,optimised and well-adapted protocols are used, the CANopen protocol has becomeindispensable in mobile machines. Manufacturer and industry-specific protocols,such as diagnostic engine data according to SAE J 1939, can be coupled to themachine process via gateways.
Extreme shock andvibration: Reliablefunction of the sensi-tive electronics mustbe guaranteed underharsh operatingconditions as well.
Especially whenseveral machine parts
are interconnectedCAN offers decisive
advantages.
Control systemsfor mobile vehicles
202Product selectors and further information can be found at: www.ifm.com
Selection chart Page
16-bit ClassicController for field applications 204
PDM360 with 5.7“ display 204
Inclination sensors for mobile applications 204
Electronic pressure sensors for mobile applications 204 - 205
Converters and PWM modules 205
Connection technology for control systems 206
Accessories for M12 modules and displays 206
Wiring diagrams 206
Scale drawings / drawing no. – CAD download: www.ifm.com 207
Control systemsfor mobile vehicles
203
16-bit ClassicController for field applications
Type Inputs /outputs
Description Draw-ingno.
Orderno.
24ClassicController · Programmable mobile controller type R 360 · 2 nd CAN interface for
gateway function according to SAE J 1939 · Programming according to IEC 61131-3 · 24inputs/outputs · 10...32 V DC
1 CR0505
40ClassicController · Programmable mobile controller type R 360 · 2 nd CAN interface for
gateway function according to SAE J 1939 · Programming according to IEC 61131-3 · 40inputs/outputs · 10...32 V DC
1 CR0020
PDM360 with 5.7“ display
Type Displayresolution
[pixels]
Displaytype
Displayillumination
Description Draw-ingno.
Orderno.
320 x 240 TFT colour LED
Process and dialogue module PDM360 · Progr. graphic displayfor controlling, parameter-setting and operation of mobilemachines and plants · 5.7“ colour display · 6 freely progr.
backlit function keys · Encoder with pushbutton · 10...32 V DC
2 CR1051
Inclination sensors for mobile applications
Type Description Draw-ingno.
Orderno.
Tilt sensor · free from mercury · semi-conductor output · 10...30 V DC 3 EC2061
Electronic pressure sensors for mobile applications
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · Wiring diagram no. 1 · Connector groups 2, 4
G¼ I – 0...400 600 1000 9.6...32 4 PA3020
G¼ I – 0...250 400 850 9.6...32 4 PA3021
G¼ I – 0...100 300 650 9.6...32 5 PA3022
G¼ I – 0...25 150 350 9.6...32 5 PA3023
G¼ I – 0...10 75 150 9.6...32 5 PA3024
Control systemsfor mobile vehicles
204Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 0...10 V analogue · Wiring diagram no. 2 · Connector groups 2, 4
G¼ I – 0...250 400 850 16...32 5 PA9021
G¼ I – 0...10 75 150 16...32 5 PA9024
M12 connector · Output function 4...20 mA analogue · Wiring diagram no. 1
G¼ A – 0...400 600 1600 8.5...36 6 PT3550
G¼ A – 0...250 400 1000 8.5...36 6 PT3551
G¼ A – 0...100 200 1000 8.5...36 6 PT3552
G¼ A – 0...25 60 600 8.5...36 6 PT3553
G¼ A – 0...10 25 300 8.5...36 6 PT3554
M12 connector · Output function 0...10 V analogue · Wiring diagram no. 2
G¼ A – 0...400 600 1600 16...36 6 PT9550
G¼ A – 0...250 400 1000 16...36 6 PT9551
G¼ A – 0...100 200 1000 16...36 6 PT9552
G¼ A – 0...25 60 600 16...36 6 PT9553
G¼ A – 0...10 25 300 16...36 6 PT9554
Converters and PWM modules
Type Description Draw-ingno.
Orderno.
PWM / analogue module 7 CR3004
Control systemsfor mobile vehicles
205You can find wiring diagrams from page 206
Connection technology for control systems
Type Description Orderno.
Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080
Cable with connector · AMP 55-pole · wired · Cable length 2.5 m · Core cross-section 1 mm2 EC2046
Connector AMP 55-pole · wirable · with contacts (AMP Junior Timer) EC2013
Accessories for M12 modules and displays
Type Description Orderno.
Fixing set · e.g. for process and dialogue monitors PDM360, PDM360 compact or PDM360 smart · for control cabinet mounting ·consisting of: · 4 mounting brackets, 4 cylinder screws
EC1453
Wiring diagrams
1
L+
L
1
2
2
L+
L
1
3
2
Control systemsfor mobile vehicles
206Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
1
153
43 LED
225
205,5
2680
1526
45°
2
189
165
6381
7
3
6,2
81
20
2,75
5,25
8,25
12,75
4
75
M12 x130
30
27
1,3
21,5
14
G 41
1: Pressure relief mechanism, No mechanical force must be exertedon the pressure relief mechanism.
5
75
M12 x130
30
27
1,3
21,5
14
G 41
6
22
1
51,2
12
G1 4/
65,1
M12 x122
1: sealing FPM / DIN 3869-14, tightening torque 25 Nm
7
42,5
54
3424,5
3,2
15
Control systemsfor mobile vehicles
207
International approval package andwide-range input for worldwide use.
Partly adjustable output voltage.
Power reserves to cover temporary overload or supply failure.
Output short-circuit, overload, andno-load protected.
State signalled via DC-ok output.
Power supplies
Transformer power supplies provide a low voltage, normally 24 V DC. A transformeraccording to DIN 0551 ensures a safe electrical separation from mains voltage andlow voltage. The output voltage can be regulated (± 5 %) or smoothed by means ofcapacitors. The different designs and output powers allow adaptation to diverseoperating conditions.
Switched-mode power supplies
Primary switched-mode power supplies are a compact and economical solution tosupply sensors and actuators. As opposed to conventional transformer powersupplies with regulated output voltage primary switched-mode power supplies needno heavy transformers so that there are fewer iron and copper losses. They aretherefore distinguished by a very high degree of efficiency of up to 92 %. Due tothe operating principle by means of high frequency transformers switched-modepower supplies are much smaller and lighter than transformer power supplies withidentical power. Nevertheless they guarantee an electrical separation. Furthermore,they offer a wide input voltage range as standard, e.g. 340 to 576 V AC. Thismakes them fit for worldwide use.
ifm switched-mode power supplies have a regulated output voltage of typ. 24 V DCwith a tolerance of ± 2 %. Apart from few exceptions the output voltage can be setbetween 24 V and 28 V to compensate for example for a voltage drop on longcables. Between no load and full load they ensure a stable supply voltage and thusoperational reliability in case of supply voltage fluctuations.
Power reserves
Mains fluctuations up to ± 15 % and mains interference are compensated for. Evenmains voltage dips of a few milliseconds are compensated for, the output voltage iscompletely maintained. An active inrushcurrent limitation reduces the inrush current via a fixed resistor which is bridgedafter start up.
The outputs are protected against short circuits and overload.
Suitable for theapplication: ifmprovides powersupplies in differentpower classes.
Power supplies
208Product selectors and further information can be found at: www.ifm.com
Selection chart Page
Standard switched-mode power supplies, single phase, discontinued types 210
Standard switched-mode power supplies, single phase 210
Standard switched-mode power supplies, three phases 210
AS-i switched-mode power supplies, single phase, SilverLine 210
Scale drawings / drawing no. – CAD download: www.ifm.com 211
Power supplies
209
Standard switched-mode power supplies, single phase, discontinued types
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
5 24 DC (+5% / -1%) 115 / 230 AC > 37 90 1 DN2012
Standard switched-mode power supplies, single phase
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
10 24...28 DC (±2%) 115 / 230 AC > 20 90 2 DN2013
Standard switched-mode power supplies, three phases
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
5 24...28 DC (±2%) 3 x 400...500 AC > 16 89 3 DN2032
10 24...28 DC (±2%) 3 x 400...500 AC > 24 90 4 DN2033
AS-i switched-mode power supplies, single phase, SilverLine
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
8 29.5...31.6 DC 115 / 230 AC > 10 92 5 AC1218
Power supplies
210Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
1
124
64
LED 131
89
4
107
2
89
4
107
124
120
131
LED
3
124
73
LED
131
4 122
103
4
4
121110
90
124
131
3
2
1
6
5
4
1: LED red, 2: reset push button, 3: jumper „overload performance“,4: jumper „single/parallel operation“, 5: with pot., 6: LED green
5
4
10796
91
124
131
Jumper
LED
Power supplies
211
Complete product range: sockets, plugs, jumper cables, splitter boxes.
Various cable materials for different applications.
High-quality materials for maximum reliability.
“ecolink” series with innovative quality features.
Integrated LEDs for easy diagnosis.
Connection technology
With a wide variety of different sensor designs ifm electronic offers a wide range ofhigh quality connectors. The choice of types covers common M8, M12, M18 typesthrough to valve plugs. The “ecolink” connectors (order no. EVxxxx) offer addi-tional quality features.
ecolink - a new dimension in connection technology
Due to the special installation of a mechanical end stop the O-ring is alwayscorrectly compressed and so permanently maintains its sealing function. The con-nector remains securely positioned on the unit even in case of extreme vibrationand impacts. Novel design and a transparent black housing ensure that even inbright lighting conditions the LEDs are more clearly visible than with the cleartransparent versions.
For industrial applications:
High-quality materials suited to the requirements in industrial environments. Largelyresistant to oils, greases and coolants.
For hygienic and wet areas:
PVC housing and cable, gold-plated contacts and high-grade stainless steel nuts arethe optimum choice for long life.
For hazardous areas
Connection technology for ATEX categories 2D, 3D and 3G. With the EC typeexamination certificate for components from DEKRA EXAM the connection tech-nology meets the strictest requirements.
For welding applications
Halogen-free PUR cables prevent burning-in of weld spatter; teflon-coated couplingnuts prevent weld spatter sticking. The cables are also suited for drag chains andtorsional movements.
For sensors in robust applications:
The saw tooth contoured vibration protection secures against strong shocks andvibrations. The high protection rating, wide temperature range and high-qualityhousing materials (high-grade stainless steel, TPU) ensure permanent safe con-nection in harsh environments.
Black, transparenthousing for optimumLED visibility.
Maximum operationalreliability due to the
new vibration protec-tion with end stop.
Connection technology
212Product selectors and further information can be found at: www.ifm.com
Selection chart Page
M8 sockets for industrial applications 214
M12 sockets for industrial applications 214 - 215
M18 sockets for industrial applications 215
1/2“ sockets for industrial applications 215
DIN sockets for industrial applications 216
M12 cable plugs for industrial applications 216
Connectors for hygienic and wet areas 216
Connectors for hazardous areas 217
Wiring diagrams 217
Scale drawings / drawing no. – CAD download: www.ifm.com 217
Connection technology
213
M8 sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 1 · Socket M8, 4-pole, 4-wire · Wiring diagram no. 1
2 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 1 EVC150
5 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 1 EVC151
M12 sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 2 · Socket M12, 4-pole · Wiring diagram no. 2
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 2 E11509
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 3 E11508
Group 3 · Socket M12, 4-pole, LED, PNP · Wiring diagram no. 3
wirable ...0.75 mm2 (Ø 4...6 mm) PA 10...30 DC -40...85 IP67green /yellow
3 E10136
Group 4 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 1
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 4 EVC004
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 4 EVC005
10 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 4 EVC006
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 5 EVC001
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 5 EVC002
Connection technology
214Product selectors and further information can be found at: www.ifm.com
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 4 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 1
10 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 5 EVC003
Group 5 · Socket M12, 5/4-pole, 4-wire, LED, PNP · Wiring diagram no. 4
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow6 EVC007
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow6 EVC008
10 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow6 EVC009
Group 6 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 5
5 m blackPUR cable 5 x 0.34 mm2, Ø 4.9 mm
TPU /brass
30 AC36 DC
-25...90IP67 / IP68 /
IP69K– 4 EVC074
M18 sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 7 · Socket M18, 4-pole · Wiring diagram no. 2
wirable ...0.75 mm2 (Ø 6...8 mm) PA20...250AC/DC
-40...85 IP65 – 7 E10013
1/2“ sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 8 · socket 1/2“, 2-pole + PE, 3-wire · Wiring diagram no. 6
5 m yellowPVC cable
3 x AWG22, Ø 5.2 mmTPU /brass
250 AC300 DC
-25...90 IP67 – 8 E10191
Group 9 · socket 1/2“, 5-pole, 4-wire · Wiring diagram no. 7
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.7 mm
TPU /brass
300 AC -25...90 IP67 – 9 E11248
Connection technology
215You can find wiring diagrams from page 217
DIN sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 10 · socket DIN A (DIN EN 175301-803) · Wiring diagram no. 8
wirable ...1.5 mm2 (Ø 6...8 mm) PA... 250 AC...300 DC
-40...125 IP65 – 10 E10058
M12 cable plugs for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 11 · Plug M12, 4-pole · Wiring diagram no. 9
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 11 E11505
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 12 E11504
Connectors for hygienic and wet areas
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 12 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 1
2 m orangePVC cable 4 x 0.34 mm2, Ø 4.9 mm
PVC /stainless steel316L / 1.4404
250 AC300 DC
-25...100IP67 / IP68 /
IP69K– 13 EVT067
5 m orangePVC cable 4 x 0.34 mm2, Ø 4.9 mm
PVC /stainless steel316L / 1.4404
250 AC300 DC
-25...100IP67 / IP68 /
IP69K– 13 EVT004
10 m orangePVC cable 4 x 0.34 mm2, Ø 4.9 mm
PVC /stainless steel316L / 1.4404
250 AC300 DC
-25...100IP67 / IP68 /
IP69K– 13 EVT005
5 m orangePVC cable 4 x 0.34 mm2, Ø 4.9 mm
PVC /stainless steel316L / 1.4404
250 AC300 DC
-25...100IP67 / IP68 /
IP69K– 14 EVT001
10 m orangePVC cable 4 x 0.34 mm2, Ø 4.9 mm
PVC /stainless steel316L / 1.4404
250 AC300 DC
-25...100IP67 / IP68 /
IP69K– 14 EVT002
Connection technology
216Product selectors and further information can be found at: www.ifm.com
Connectors for hazardous areas
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 13 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 5
2 m bluePUR cable 5 x 0.34 mm2, Ø 4.9 mm
TPU /brass
...30 DC -25...90IP67 / IP68 /
IP69K– 4 ENC10A
Core colours
BK black
BN brown
BU blue
WH white
GY grey
Wiring diagrams
1
1
2
3
4
BN
WH
BU
BK
2
1
2
3
4
3
L+
L
out
out
1
3
4
YE GN
2
4
out
out
L+
L
1
3
4
YE GN
BN
BU
BK
2 WH
YE
5
1
2
3
4
5
BN
WH
BU
BK
GY
6
1
2
3
GN
RD/BK
RD/WH
7
8
1
2
3
9
1
2
3
4
Scale drawings / drawing no. – CAD download: www.ifm.com
1
9
10 31
M8x1
4
3
2
1
2
35
18
20
M12 x1
30
3
1 2
4
3
18
M12 x1
46
3
1 2
4
4
15,5
M12x1 36,5
26,5
14 3
1 2
4
5
Connection technology
217
Scale drawings / drawing no. – CAD download: www.ifm.com
5
15,5
M12x1 45
14
3
1 2
4
5
6
15,5
M12x1 36,5
26,5
143 LED 3
1 2
4
5
7
25
M18 x1
36
21
43
21
3
1 4
2
8
42
10,5
15
G 21
3
1
2
9
27
10,5
15
39
"-20UNF21 32
5 1
4
10
2918
42
M322
282
21
3
11
42
18
15
20
M12 x1
31
43
2 1
12
5220
M12 x1
43
2 1
13
15,5
M12x1 36,5
26,5
14 3
1 2
4
5
14
15,5
45
14
M12 x1
3
1 2
4
5
Connection technology
218Product selectors and further information can be found at: www.ifm.com
Connection technology
219
Argentinaifm electronic s.r.l.Manuela Sáenz 3235º piso, oficina 3C1107BPA – Puerto MaderoBuenos Aires, ArgentinaTel. (011) 5353-3436Fax (011) 5353-3436Interior [email protected]/ar
Australiaifm efector pty ltd.P.O. Box 4084Suite 3, 745 Springvale RoadMulgrave VIC 3170Tel. 1300 365 088Fax 1300 365 [email protected]
Austriaifm electronic gmbhWienerbergstraße 41Gebäude E1120 ViennaTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 [email protected]/at
BangladeshSensotec AutomationRed Crescent Chamber87, Motijheel CommercialAreaDhaka 1000BangladeshTel. +880 171 546 [email protected]
BelarusDEPOSIT INVESTJoint-Stock CompanyBlock 2, 27 Zheleznodorovhnaya street220089 MinskRepublic of BelarusTel. +375-17-270 75 06Fax +375-17-270 75 [email protected]
Belgium andLuxembourgifm electronic n.v./s.a.Zuiderlaan 911731 ZellikTel. +32 2 481 0220Fax +32 2 463 [email protected]/be
BoliviaBAVARIA S.R.L.Álvaro Baptista VargasZona Morocollo, Urb. Santos PariamoC. Mario Diaz de medina (26-A), Nr. 32La Paz - BoliviaTel.: 00-591-2-277 13 78Mobile: 00-591-720-47 [email protected]
Brazilifm electronic Ltda.Rua Eleonora Cintra, 140Jardim Analia Franco03337-000 Sāo Paulo/SPTel. +55-11-2672-1730Fax [email protected]/br
Bulgariaifm electronic eoodul. Slatinska Nr. 92 A, ap. 2/31574 SOFIATel. +359 2 807 59 69Fax +359 2 807 59 [email protected]
Canadaifm efector Canada Inc. 700 Dorval Drive/CorporateCentreOakville; L6K3V3 OntarioTel. +1-800-441-8246 Fax [email protected]
ChileElectronica IndustrialSchädler y Cia. Ltda.Av. Antonio Varas 1871Providencia6641545 SantiagoTel. +56 / 2 / 274 74 30Fax +56 / 2 / 204 93 [email protected]
Chinaifm electronic (Shanghai) Co., LtdBuilding 15, No 912Bi Bo Road, Pu Dong DistrictShanghai 201210, ChinaTel. +86-21-50278559 Fax +86-21-50278669Fax [email protected] www.ifm.com/cnifm electronic (HK) LtdUnit 2106, 21/F, Tower 2, MetroplazaNo. 223 Hing Fong Road, Kwai Chung, N.T., Hong Kong.Tel. +852 3528-0462Fax +852 [email protected]/hkifm electronic (Taiwan) Limited2C, Bao-Cheng Enterprise Tower,No. 6 Mincyuan Second Road,Cianjhen District, Kaohsiung City,Postal Code 806, Taiwan, R.O.C.Tel. +886-7-335-7778Fax [email protected]/tw
ColumbiaSENSOMATIC Y CIA LTDA.CALLE 1 C 25a - 50BOGOTA D.C. COLOMBIATel. +57 313 430 2264Tel. +57 1 407 96 [email protected]
Croatiaifm electronic gmbhWienerbergstr. 41Gebäude EA-1120 WienTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 [email protected]/hr
Czech Republicifm electronic spol.s.r.o.U Křížku 571252 43 PragueTel. +420 / 2 / 67 990 211 Fax +420 / 2 / 67 750 180 [email protected]/cz
Denmarkifm electronic a/sRingager 4A, 1.sal tv.2605 BrøndbyTel. +45 70 20 11 08Fax +45 70 20 11 [email protected]/dk
Dominican RepublicWECH AUTOCONTROLES S. A.Ave. Romulo Betancourt 2158 Edificio WechUrb. RenacimientoSanto DomingoDominican RepublicTel.: + 1 809-531-0550Fax: + 1 [email protected]
EcuadorINSELEC CIA. LTDA.Av. de los AruposE1-202 y Pan. Norte- Km 5 ½QuitoTel. +593 2 28074- 76 - 78Fax +593 2 [email protected]
EgyptEgyptian Establishment forElectromechanical SuppliesMr. Ahmed Gouda27 Al-Salam StreetAl Arezona, Al Haram RoadGiza 12111, CairoTel. +20 / 2 / 586 49 49Fax +20 / 2 / 586 49 49Mobile +20 10 10 61 [email protected]
EstoniaPesmel Estonia LTDSegu 476505 SaueEstoniaTel.: +372 674 73 30 Fax: +372 674 73 [email protected]
Finlandifm electronic oyVaakatie 5 00440 Helsinki Tel. +358 / 9 / 751 777 00 Fax +358 / 9 / 751 777 10 [email protected]/fi
Franceifm electronicSiège :Savoie Technolac BP22673374 Le Bourget du LacAgence commerciale :Immeuble Uranus1-3 rue Jean Richepin93192 NOISY LE GRANDCEDEXTél: 0820 22 30 01Fax: 0820 22 22 [email protected]/fr
Germanyifm electronic gmbhFriedrichstr. 145128 EssenTel. +49 201 24 22 0Fax +49 201 24 22 12 [email protected]/de
Greeceifm electronic monoprosopi E.P.E.27, Andrea Papandreou Street15125 AmaroussiGreeceTel. +30 210 61 800 90Fax +30 210 61 994 [email protected]/gr
HondurasR y D INDUSTRIALBo. Paz Barahona11 Ave. 14 y 15 CalleS.O. #142San Pedro SulaTel. +504 5503703Fax +504 [email protected]
Hungaryifm electronic kft.Szent Imre út 59. I.em.H-9028 GyőrTel. +36-96 / 518-397Fax +36-96 / [email protected]/hu
Indiaifm electronic India Pvt. Ltd.Plot No. P-39/1MIDC Gokul ShirgaonKolhapur – 416234Maharashtra State, IndiaTel. +91 / 231 / 267 27 70Fax +91 / 231 / 267 23 [email protected]/in
IndonesiaPT Indoserako SejahteraJl. P. Jayakarta 121 No. 5910730 Jakarta PusatTel. +62 / 21 6 24 8923Fax +62 / 21 6 24 [email protected]
Irelandifm electronic (Ireland) Ltd.No. 7, The CourtyardKilcarbery Business ParkNew Nangor RoadClondalkinDublin 22Tel. +353 / 1 / 413 60 66Fax +353 / 1 / 457 38 [email protected]/ie
IsraelAstragal Ltd.3, Hashikma Str.Azur 58001P.O. Box 99Azur 58190Tel. +972 / 3 / 5 59 16 60Fax +972 / 3 / 5 59 23 [email protected]
Italyifm electronicCentro Direzionale ColleoniPalazzo Andromeda 2Via Paracelo n° 1820041 Agrate Brianza (Milano)Tel. +39 / 039 68 99 982Fax +39 / 039 68 99 [email protected]/it
Japanefector co. ltd.Chiba Higashi Techno Green Park2-9-20 OkayamadaiTogane-shi, Chiba 283-0826Tel. +81 / 475 50 3003Fax +81 / 475 50 [email protected]/jp
JordanAl Mashreqan Trading SuppliesP.O.Box.85105411185 SwaifiehAmman - Jordan.Tel. +962 6 581 8841Fax +962 6 581 [email protected]
ifm – worldwideaddresses
220Product selectors and further information can be found at: www.ifm.com
Koreaifm electronic Ltd.2F Hyundai Liberty House #201Hannam-Dong 258,Yongsan-Gu,Seoul, KoreaTel. +82 2-790-5610Fax +82 [email protected]/kr
LatviaEC SystemsKatlakalna Str. 4A1073 RigaLatviaTel.: +371 724 1231Fax: +371 724 [email protected]
LebanonMiddle East DevelopmentCo. SAL (MEDEVCO)Medevco Building Jeita Main Road Jeita - Kesrouan LebanonMail address :P.O.Box 67 Jounieh LebanonTel. +961-9-233550 Fax +961-9-233554 [email protected]
LithuaniaElinta UABTerminalo g. 3, Biruliškių k.,Karmėlavos sen.LT-54469 Kauno raj. (Kauno LEZ)LithuaniaTel.: +370 37 351 999Fax: +370 37 452 [email protected]
Malaysiaifm electronic Pte. LtdMalaysian Branch OfficeNo. 2-4-2, Fourth FloorTower 2 @ PFCC, Jalan Puteri 1/2,Bandar Puteri Puchong,47100 Puchong, Selangor.Tel. +60 / 3 / 8063 9522Fax +60 / 3 / 8063 [email protected] electronicAsia Regional OfficeNo. 21, Jalan Kemunting,Taman Kebun The80250 Johor BahruJohor, West MalaysiaTel. +60 / 7 / 332 5022Fax +60 / 7 / 332 [email protected]
Mexicoifm efector S. de R.L. de C.V.Anillo Periférico, 1816-1Col. Hacienda San JerónimoMonterrey, N.L.Mexico 64630Tel. +52-81-8040-3535Fax +52-81-8040-2343www.ifmefector.mx
Netherlandsifm electronic b.v.Deventerweg 1 E3843 GA HarderwijkTel. +31 / 341 438 438Fax +31 / 341 438 [email protected]/nl
New Zealandifm efector pty ltd.Unit B, 20 Cain RoadPenrose, AucklandTel. +64 / 95 79 69 91Fax +64 / 95 79 92 [email protected]/nz
NigeriaAutomated Process Ltd3rd Floor, 32 Lagos AbeokutaExpresswayNear Cement Bus StopDopemu, AgegeLagos State, NigeriaTel. + 234 / 01 / 4729 967Fax + 234 /01 / 4925 [email protected]
NorwaySiv.Ing. J.F.Knudtzen ASBillingstadsletta 971396 BillingstadPostboks 1601378 NesbruTel. +47 / 66 98 33 50Fax +47 / 66 98 09 [email protected]
OmanTechnical Engineering Company LLC.P.O. Box 59 Madinat Al Sultan QaboosPostal Code 115 Sultanate of OmanTel. +968 24503593Fax +968 [email protected]
PakistanAB AutomationShop No.2. Rubab ChamberM.A. Jinnah RoadOff Sarai RoadKarachiTel. +92 / 21 / 2412 278Fax +92 / 21 / 2422 [email protected]
Perudekatec s.a.c.Los Calderos 188Urb. Vulcano, AteLima / PeruTel. +511 / 348 0293Tel. +511 / 348 0458Tel. +511 / 348 2269Fax +511 / 349 [email protected]
PhilippinesGram Industrial, Inc.Unit 402 & 410 CommonGoal TowerFinance cor., Industry St.,Madrigal Business Park AyalaAlabangMuntinlupa City 1770Telephone: 632-8502218/8508496Fax: 632-8077173 / [email protected]
Polandifm electronic Sp.z o.o.ul. Kosciuszki 175PL 40-524 KatowiceTel. +48 / 32 / 60 87 454Fax +48 / 32 / 60 87 [email protected]/pl
Portugalifm electronic –Sucursal em PortugalAvenida da Republica 25034430-208 Vila Nova de GaiaTel. +351 / 22 / 37 17 108Fax +351 / 22 / 37 17 [email protected]/pt
Romaniaifm electronic s.r.l.Str. Cristian Nr. 5550073 SibiuTel.: 0040 269 224550Fax: 0040 269 [email protected]
Russiaifm electronicIbragimova, 31, k.50office 607105318 MoscowTel.: +7 (495) 921-44-14Fax: +7 (495) [email protected]/ru
Saudi ArabiaNoor Al-Shomoe for Electric & MaintenanceKing Khalid Street, Cross 5P.O. Box 2571Al-Khobar 31952Kingdom of Saudi ArabiaTel. +9 663 864 49 58Fax +9 663 894 63 [email protected]
Singaporeifm electronic Pte. Ltd.25, Intern. Business Park#03-104 German Center609 916 SingaporeTel. +65 / 6 / 5 62 86 61Fax +65 / 6 / 5 62 86 [email protected]/sg
Slovakiaifm electronic spol. s.r.o.Rybnicna 40831 06 BratislavaTel. +421 / 2 / 44 87 23 29Fax +421 / 2 / 44 64 60 [email protected]/sk
South Africaifm electronic (pty) LtdShorrok HouseRoute 21 Corporate ParkNellmapius Drive, Irene Ext. 30, Centurion 0157, Pretoria Postnet Suite 279Private bag X8Elardus Park0047Tel. +27 (0) 861 IFM RSA /436 772Fax +27(0)12 450 [email protected]/za
Spainifm electronic s.l.Edificio Prima Muntadas AParc Mas BlauC/Berguedà 108820 El Prat de LlobregatTel. +34 / 93 / 479 30 80Fax +34 / 93 / 479 30 [email protected]/es
Swedenifm electronic abHallavägen 10 512 60 Överlida Office Gothenburg:Drakegatan 641250 GothenburgTel. +46 / 325 / 66 15 00 Tel. +46 / 325 / 66 15 50Fax +46 / 325 / 66 15 [email protected]/se
Switzerlandifm electronic agAltgraben 274624 HärkingenTel. +41 / 62 / 388 80 30Fax +41 / 62 / 388 80 [email protected]/ch
SyriaI.E.C. Industrial Engineering CenterP.O. Box 15 Sehnaya, DamascusSyriaTel. + 963 11 532 13 19Fax. + 963 11 442 12 [email protected]
ThailandSang Chai Meter Co., Ltd.694/16-19 Phaholyothin RoadSamsen Nai, Phayathai Bangkok 10400 Tel. +66 / 2 / 616 8051Fax +66 / 2 / 616 [email protected]
Turkeyifm electronic Elektrikli veElektronik Aletlerİth.İhr.Paz.Tic.Ltd.Şti. Merkez Mah. Nadide Sok. Anıttepe Sitesi No:28 34381 Şişli / İstanbulTel. +90 / 212 / 210 5080Fax +90 / 212 / 221 [email protected]/tr
Ukrainaifm electronicMariny Raskovoj 1102660 KievUkraineTel. +380 44 501 8543Fax +380 44 501 [email protected]/ua
United Arab EmiratesNoor Al-Shomoe Electrical Equipments Est.P.O.Box. 64052Unit no. 36Reef Real EstateJebel Ali Industrial Area no. 3DubaiUnited Arab Emirates.Tel. +971 4 880 3838Fax +971 4 880 3883Mobile +971 [email protected] Arab Emirates –Abu DhabiAl Injazat Technical Trading ServicesP.O. Box 42895Abu DhabiUnited Arab EmiratesTel. +971 2 622 6030Fax +971 2 622 [email protected]
United Kingdomifm electronic Ltd.efector HouseKingsway Business ParkOldfield RoadHamptonMiddlesex TW12 2HDTel. +44 / 20 / 8213 0000Fax +44 / 20 / 8213 [email protected]/uk
USAefector inc.805 Springdale Drive Exton, PA 19341 Tel. +1 / 610 524 2000 Fax +1 / 610 524 [email protected]
VenezuelaPetrobornas, C.A.Calle Pricipal, Centro Comercial Astur, Nivel PB, Local 05, Sector Matanzas, UD-321,Puerto Ordaz - Estado BolivarVenezuela Tel. +58 286-994 3406Tel. +58 286-718 1123 Fax +58 286-994 3406Fax +58 286-994 [email protected]
VietnamThien Viet Electrical Serviceand Trading Co., Ltd.784 Dien Bien Phu Str.Ward 11, Dist. 10Ho-Chi-Minh-City, Viet NamTel. +84 / 8 / 830 9916 Fax +84 / 8 / 830 [email protected]
ifm – worldwideaddresses
221
www.ifm.com