· 2011. 7. 8. · Global Catalogue 2011/2012. The automotive catalogue of ifm electronic gmbh: ... This ifm catalogue should help you to define the optimum products for your tasks.

ww

w.if

m.c

om

fluid sensors and diagnostic

systems

bus, identification

and control systems

position sensors

and objectrecognition

Automation Productsfor the Automotive Industry

Global Catalogue2011/2012

The automotive catalogue of ifm electronic gmbh:

Manual and guidebook for youreveryday job.

Support for project processing.

Assistance for repair and maintenance.

Reference for technical information.

ifm electronic – active as a globally recognised sensor manufacturer in the auto-motive industry for many years - provides you in this automotive catalogue with anoverview of the products on the basis of current product and project specifications ofall renowned car manufacturers worldwide.

This ifm catalogue should help you to define the optimum products for your tasks.Whether just sensors or the appropriate mounting solution – ifm electronic alwaysoffers the right solution.

For the sake of optimum transparency ifm electronic has combined all products fromthe worldwide product range which are suitable for the automotive industry in thisspecially adapted catalogue.

Whether for planning, projects or repair / maintenance: Here you can get a reliableand fast overview and make the right selection.

Trust the decades of experience of the ifm specialists in the automotive area.

We will support you!

visit our website:

www.ifm.com

Over 70 locations worldwide – at a glance at wwww.ifm.com

ifm electronic gmbhFriedrichstraße 145128 EssenTel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200E-Mail: [email protected]

ifm – the company 6 - 7

General information 8 - 12

Standards and approvals / list of articles 14 - 29

Sensors for specific applications 30 - 33

Inductive sensors 34 - 89

Capacitive sensors 90 - 100

Magnetic sensors 102 - 106

Cylinder sensors 108 - 115

Valve sensors 116 - 120

Photoelectric sensors 122 - 185

Object recognition 186 - 194

Encoders 196 - 199

Evaluation systems 200 - 207

Evaluation systems for safety and EX 208 - 216

Level sensors 218 - 228

Flow sensors 230 - 246

Pressure sensors 248 - 268

Temperature sensors 270 - 282

Diagnostic systems 284 - 289

Bus system AS-interface 290 - 302

Identification systems 304 - 315

Power supplies 316 - 321

Connection technology 322 - 339

ifm – worldwide addresses 340 - 341

The company in your vicinity.

State-of-the-art communication.

With the right address – www.ifm.com – only a mouse click separates you from theworld of automation technology. See the power of our products in interactiverepresentations. Gain an impression with 3-dimension-al views of our units. Down-load CAD drawings for direct integration in your applications. Or order online inifm’s e-shop - fast, convenient and reliable.

We are there for you.

Close contact with our customers is part of our success. Therefore we haveconsistently developed our sales network right from the start. Today ifm electronic isrepresented in more than 70 countries – close to you! With application advice andservice at the heart of our operation. For the introduction of new products andtechnologies we support you with workshops and seminars in our training centres orin your plant.

Security by success.

Since its foundation in 1969 ifm electronic has constantly grown, now having morethan 3300 employees worldwide, and achieved a turnover of more than EUR 340million in 2009. This success gives you the security of having a reliable partner for theimplementation of your automation projects. Comprehensive service and a warrantyof up to 5 years on standard units are just two examples of this reliability.

sale

s de

velo

pmen

t in

mill

ion

EU

R

2000 2010199019801970

100

0

200

300

400

500Turnoverdevelopmentsince 1970.

ifm – the company

6

branch officetrade partner

ifm – the company

7

A sign of innovation.

Not only components.

ifm stands for a large range of different sensors and systems for automation. Ourrange of of more than 7,800 articles guarantees flexibility and compatibility. So thereis always a reliable solution for your automation projects – from the individual sensorwith practical accessories to the complete system.

Availability guaranteed.

Your deadlines matter to us. That is why we are constantly optimising our productionprocesses in order to be able to quickly and flexibly produce large quantities at aconstantly high quality – and to continue to shorten delivery times. Your order isdispatched via our centralised logistics centre reliably and on time.

Quality as part of our philosophy.

The quality standard of our products is an integral part of our company philosophy.And we guarantee it! So we provide you, the users, with a maximum degree ofsecurity: By means of our own production technology, ifm film technology, as well asby means of extensive quality assurance measures such as 100 % final testing.By quality we understand, for example, ecologically conscious production – Made inGermany!

The developmentof innovativeproducts is oneof our corecompetences.Under the name ofi-step we havecome up with anew product gene-ration whichimplements sophi-sticated technolo-gies in industriallycompatible andeasy to handleproducts. Fromhigh-quality stan-dard solutions toproducts speciallytailored to therequirements ofthe individualindustries – frommobile machinesto the foodindustry.

General information

Product selectors and further information can be found at: www.ifm.com

8

www.ifm.comInformation around the clock andaround the globe in 22 languages on the internet.

• Information

- product innovations- company news- exhibition info- locations- jobs

• Documentation

- data sheets- operating instructions- manuals- approvals- CAD data

• Communication*

- request for documents- recall service- live advice- newsletter

• Selection

- interactive product selection aids- configuration tools- data sheet direct

• Animation

- virtual product animations- flash movies (video sequences)

• Application

- applications- product recommendations- calculation aids

• Transaction*

- e-shop processing- e-procurement catalogues- B2B services

*Some offered information is available country-specific

General information


9

Convenient order processingvia the e-shop** on the internet.

Secured authentication

Customer-related priceindication

Real time availability check

Personal product favourites

Online parcel tracking

Individual order history

Convenient quick input form

Simple order processing

Management of shippingaddresses

Confirmations by e-mail

** Already available in many countries.

General information


10

Press shop: Detection of coils

In press shops optical sensors are usedmore and more often besides the tried-and-tested inductive sensors for posi-tioning coils and verifying their position.It is in particular the O1D distance sensor that is distinguished by its smallhousing and long range.

Press shop: Position verification

To verify the position of the sheet metalparts in hydraulic presses, both induc-tive sensors and the control unit for partseat monitoring of type PS7570 are perfectly suited. Safety technology fromifm is an optimum choice for the safety-related areas around the presses.

Body-in-white: Welding

For many years, weld-immune, electro-magnetic field immune, and Teflon-coated full metal sensors have estab-lished in the field of body-in-white asreliable problem solvers.

Other innovative products such as opti-cal sensors, ring sensors and leakagesensors complete the ifm product rangefor body-in-white.

Body-in-white: Riveting, gluing, punching, joining

Robust, reliably functioning sensorswith a long life used in punching, rivet-ing and joining processes ensure highquality of the attachment and the indi-vidual body work. They contribute theirshare to implementing minimum gapdimensions in body-in-white.

General information


11

Paint shop: Painting bodies

The spray booths demand a lot of thesensors used. The high protection ratingIP67 / IP69K is required. Processed mate-rials from the ifm range ensure a smoothand reliable painting process.

Paint shop: Body conveying

Inductive sensors in a rectangular housing of type IMC (40 x 40 mm) andtype IDC (80 x 80 mm) do their job reliably and accurately in conveyingsystems. They are supported by thetried-and-tested optical sensors of typesO4 and O5, known for their smalldimensions and high performance.

Assembly: Wheel assembly on anelectronic suspension conveyor

Inductive sensors and photoelectric sen-sors, pressure sensors and level sensorsand many other components of the ifmrange of products support the assemblyprocesses.

Assembly: Wheel assembly

Precision is demanded for the “mar-riage”, i.e. when chassis and body are joined.

Employees have to put together bothparts in relatively short cycle times andthey are again supported by ifm sen-sors.

General information


12

Powertrain: Gearbox assembly

During the mounting of gearboxes andgear parts it is important to assemblethe parts accurately and completely.This application can, for example, besolved by using the O1D distance sensoror the O2D object sensor, with millime-tre accuracy. By means of RFID tech-nology it is known exactly where thegearbox is at any given time.

Powertrain: Power pack monitoring

In power packs of powertrain plantspressure, temperature, level, leakageand flow of media have to be moni-tored and controlled.

Quality, robustness and precise mea-surement results are required. The ifmsensors reliably meet these require-ments.

Building system automation: Bearing monitoring

The early detection of bearing damageat the motor and fan ensures that mea-sures for replacement can be planned indue course and that sudden downtimesare avoided. Today, condition-basedmonitoring has become a familiar concept and is implemented seamlesslythanks to ifm efector octavis.

Building system automation: Air consumption in buildings

Compressed air consumption and leakage are cost factors that are not tobe underestimated. These applicationsare solved by the user-friendly and easy-to-mount compressed air meter efectormetris from ifm. With this innovativesensor considerable cost reductions arepossible.

General information


13

3A 3A Sanitary Standards, Inc. (3-A SSI) is an independent, not-for-profit corporationdedicated to advancing hygienic equipment design for the food, beverage, and phar-maceutical industries.

AS-i Actuator-Sensor Interface. Bus system for the first binary field level.

ATEX Atmosphère Explosible. ATEX comprises the directives of the European Union in thefield of explosion protection. On the one hand there is the 94/9/EC ATEX productdirective and on the other hand the 1999/92/EC ATEX operation directive.

CCC CCC (China Compulsory Certification) is a compulsory Chinese certification for cer-tain products put on the market in China. Which products are concerned is specifiedin a catalogue created by the Chinese authorities.

cCSAus Testing a product by CSA according to the safety standards applicable in Canada andthe USA.

CE Conformité Européenne. By affixing the CE marking to a product, the manufacturerdeclares that it meets EU safety, health and environmental requirements.

cRUus Testing components by UL according to the safety standards applicable in Canadaand the USA. Components can be used when the „condition of acceptability“ iscomplied with for the final product.

CSA Canadian Standards Association. A non-governmental Canadian organisation thatsets standards and tests and certifies products for their reliability. By now it is activeworldwide.

cULus Testing components by UL according to the safety standards applicable in Canadaand the USA.

DIBt (WHG) Deutsches Institut für Bautechnik (Federal Water Act). The Federal Water Act (WHG)is the essential part of the German law relating to water . It contains provisions forthe protection and use of surface water and ground water and also regulationsabout the expansion of waters, water planning and flood protection.

e1 Approval by the Kraftfahrt-Bundesamt (German Federal Motor Transport Authority).The e1 type approval by the German Federal Motor Transport Authority certifies thatthe units comply with the automotive standards. Units with this marking are allowedto be mounted on vehicles without expiry of their operating permit.

EHEDG European Hygienic Engineering & Design Group. US-American supervisory authorityfor food and drugs. This authority grants approvals for products and materials usedin the food and pharmaceutical industries.

FDA Food and Drug Administration. US-American supervisory authority for food anddrugs. This authority grants approvals for products and materials used in the foodand pharmaceutical industries.

Standards and approvals /list of articles


14

FM Factory Mutual Research. A US-based insurance company that specializes in loss pre-vention services in the property insurance market sector. They provide material rese-arch, material testing and certifications in the field of fire and explosion protection.

PROFIBUS Process Field Bus. Fieldbus system for important data quantities. It is available in seve-ral versions such as Profibus FMS, DP or PA. Profibus DP can be used over longerdistances, e.g. as fieldbus for AS-i.

TÜV Technischer Überwachungs Verein (technical inspection association). The GermanTÜV is a private-sector body carrying out technical safety tests that are stipulated bygovernment laws or instructions.

UL Underwriters Laboratories. An organisation founded in the USA for testing and certi-fying products and their safety.



15



16

Orderno.

Approvals Cataloguepage

AC003S CE, CUL 295

AC004S CE, CUL 295

AC010S CE 295

AC031S CE, CUL 295

AC032S CE, CUL 295

AC1154 CE 297

AC1207 CE, CUL 293, 319

AC1212 CE, CUL 293, 319

AC1218 CE, CRUUS 293, 319

AC1223 CE 293, 319

AC1236 CE, CRUUS, CUL 318

AC1244 CE, CRUUS, CUL 319

AC1326 CE, CUL 292

AC1327 CE, CUL 292

AC1331 CE, CUL 292

AC1332 CE, CUL 292

AC1335 CE, CUL 292

AC1337 CE, CUL 292

AC1355 CE, CUL 292

AC1356 CE, CUL 292

AC1365 CE, CUL 292

AC1366 CE, CUL 292

AC1375 CE, CUL 292

AC1376 CE, CUL 292

AC1401 CE, CUL, Profinet 292

AC1402 CE, CUL, Profinet 292

AC2086 CE 294

AC2211 CE 293

AC2212 CE 293

AC2250 CE, CRUUS 293






AC2410 CE, CUL 294

AC2412 CE, CUL 294

AC2457 CE, CUL 294

AC2459 CE, CUL 294

AC3000 297

AC4000 CE 297

AC4002 CE 297

AC5000 CUL 294

AC5003 CUL 294

AC5005 296

AC5010 CUL 294

AC5011 CUL 295

AC5204 CE, CUL 294

AC5208 CE, CUL 294

AC5215 CE, CUL 294

Orderno.


AC5228 CE 295

AC5246 CE 295

AC5251 CE 295

AC5270 CE 295

DA0001 CE 204

DA0116 CE, CUL 204

DD0001 CE 203

DD0008 CE 203

DD0022 CE 203

DD0116 CE, CUL 204

DD0122 CE, CUL 204

DD2001 CE 202

DD2002 CE 202

DD2003 CE, CUL 202

DD2006 CE, CUL 202

DD2103 CE, CUL 202

DI0001 CE 204

DI5003 CE 204

DI6001 CE, CUL 204

DL2003 CE, CUL 205

DN0001 CE 318

DN0012 CE 318

DN0200 CE 318

DN2032 CE, CUL 318

DN2033 CE, CUL 318

DN2035 CE, CUL 318

DN2036 CE, CUL 318

DN2134 CE, CUL 318

DS2001 CE 202

DS2003 CE, CUL 203

DS2005 CE, CUL 203

DTA100 CE, CUL 296, 314

DTA101 CE, CUL 296, 314

DW2003 CE, CUL 203

DW2004 CE 203

DX2002 CE 205

DX2012 CE 205

E10013 326

E10015 71, 96

E10016 70

E10017 262, 277, 70

E10076 205, 72, 96

E10077 205, 72, 96

E10137 326

E10154 71

E10190 327

E10200 327

E10437 330

E10730 298, 314, 73

E10735 105, 71, 96


(CCC) = CCC approval is not required

17

Orderno.


E10736 105, 135

E10737 205, 72, 96

E10741 71

E10742 72

E10743 72

E10752 105

E10753 105

E10802 296

E10803 296

E10806 71

E10807 72

E10808 72

E10848 71

E11030 95

E11033 95

E11034 95

E11036 95

E11047 105, 71

E11048 105, 72

E11049 72

E11114 71

E11115 72

E11218 330

E11231 192, 326

E11232 192, 326

E11252 327

E11311 192, 326

E11416 330

E11417 330

E11418 330

E11419 330

E11504 CRUUS 327

E11506 CRUUS 328

E11507 CRUUS 328

E11508 CRUUS 325

E11509 CRUUS 325

E11511 CRUUS 325

E11521 71

E11531 70

E11533 71

E11534 72

E11550 327

E11552 324

E11553 324

E11569 212

E11572 286

E11592 332

E11595 332

E11664 286

E11741 326

Orderno.


E11742 327

E11796 113

E11797 112

E11799 112

E11801 112

E11807 192, 326

E11816 112

E11818 112

E11872 113

E11890 113

E11898 192, 309

E11912 113

E11913 113

E11950 192, 326

E12153 96

E12163 96

E17320 118

E17327 119

E17328 119

E1D100 150, 158

E20003 134

E20004 134

E20005 135

E20051 166

E20052 166

E20053 166

E20054 166

E20055 166

E20056 166

E20057 166

E20058 166

E20059 165

E20060 165

E20061 165

E20062 165

E20104 167

E20107 167

E20128 165

E20129 165

E20130 165

E20211 167

E20230 166

E20452 135

E20453 135

E20489 166

E20493 165

E20494 166

E20590 135

E20603 162

E20606 162



18

Orderno.


E20612 162

E20633 163

E20639 163

E20645 163

E20679 166

E20680 166

E20711 164

E20714 163

E20715 164

E20716 137

E20718 105, 73, 96

E20719 105, 73, 96

E20720 136, 149

E20722 149, 178

E20723 136, 149

E20724 135

E20737 149

E20738 326

E20740 136, 150

E20744 135, 178

E20748 163

E20750 163

E20752 163

E20753 163

E20755 167

E20758 163

E20789 137

E20793 137

E20794 150

E20796 138

E20864 73

E20865 73

E20866 105, 73, 96

E20867 105, 73, 97

E20874 73, 97

E20877 137

E20901 314

E20907 135

E20914 135

E20938 138, 151

E20939 190, 192

E20940 138, 151

E20941 190, 309

E20948 190, 308

E20950 138

E20951 138, 151

E20952 191

E20956 134

E20964 136

E20966 136

Orderno.


E20968 136

E20969 136

E20974 136, 150

E20975 150

E20976 150

E20988 149

E20989 149

E20990 149

E20992 149

E21007 135

E21012 137

E21015 135

E21056 136

E21081 138, 151

E21083 137

E21084 137

E21085 137, 178

E21087 136, 178

E21101 163

E21102 163

E21122 137

E21133 150, 159

E21165 191, 309

E21168 191, 309

E21171 150, 159

E2D101 150, 159

E2D107 190

E2D108 190

E2D109 190

E2D110 190, 308

E2D111 150, 159

E2D112 190, 308

E2D200 190

E2I200 308

E30000 225, 263

E30003 263

E30006 225, 262

E30007 225, 263

E30016 278

E30017 278

E30018 278

E30024 278

E30046 278

E30078 262, 277

E30080 286

E30094 262, 279

E30098 286

E30101 225, 262

E30104 225, 262

E30112 192, 287



19

Orderno.


E30396 CE 262, 277

E30399 225, 263

E30400 225, 263

E30401 226, 263

E30402 226, 263

E35010 277

E35020 277

E35030 278

E35050 278

E37010 278

E37340 263

E37350 263

E37360 263

E3D103 191

E3D201 191

E40078 239

E40079 239

E40096 239, 279

E40097 239, 279

E40098 239, 279

E40099 239, 278

E40100 239, 278

E40101 239, 278

E40104 239, 278

E40107 279

E40128 239, 278

E40129 239

E40130 240

E40151 240

E40152 240

E40153 240

E40178 240

E40179 240

E40180 240

E40189 240

E40196 241

E40197 241

E40198 241

E40199 240

E40203 240

E40205 240

E40213 240

E40214 240

E40215 241

E40216 241

E40217 241

E43000 224

E43001 223

E43003 223

E43004 224

Orderno.


E43006 223

E43007 223

E43008 223

E43009 224

E43012 223

E43013 224

E43016 224

E43019 223

E43100 224

E43101 224

E43102 224

E43201 224

E43202 224

E43203 224

E43204 225

E43205 225

E43206 224

E43207 225

E43208 225

E43209 225

E43210 225

E43910 224

E60034 199

E60035 199

E60063 198

E60065 198

E60066 198

E60067 198

E60120 198

E60124 198

E7001S 297

E7003S 297

E70067 297

E70096 296

E70188 296

E70213 297

E70230 CRUUS 296

E70354 CUL 294, 296

E7040S 297

E70423 297

E80302 298, 314

E89010 206

EBC012 CUL 331

EBC019 CUL 330

EBC027 CUL 330

EBC031 CUL 330

EBC034 CUL 331

EBC035 CUL 331

EBC036 CUL 331

EC2080 192, 287



20

Orderno.


EVC001 CRUUS 325

EVC002 CRUUS 325

EVC003 CRUUS 325

EVC004 CRUUS 325

EVC005 CRUUS 325

EVC007 CRUUS 325

EVC008 CRUUS 325

EVC009 CRUUS 325

EVC012 CRUUS 329

EVC013 CRUUS 329

EVC016 CRUUS 329

EVC020 CRUUS 329

EVC021 CRUUS 329

EVC022 CRUUS 329

EVC023 CRUUS 329

EVC024 CRUUS 329

EVC059 CRUUS 329

EVC142 CRUUS 324

EVC143 CRUUS 324

EVC147 CRUUS 324

EVC149 CRUUS 324

EVC150 CRUUS 324

EVC151 CRUUS 324

EVC154 CRUUS 324

EVC215 328

EVC238 328

EVC240 328

EVC241 328

EVC242 329

EVC243 329

EVC302 CRUUS 328

EVC313 CRUUS 328

EVW001 CRUUS 331

EVW002 CRUUS 331

EVW003 CRUUS 331

EVW004 CRUUS 331

EVW005 CRUUS 331

EVW006 CRUUS 331

EVW007 CRUUS 332

EVW008 CRUUS 332

EVW009 CRUUS 332

EVW010 CRUUS 332

EVW011 CRUUS 332

EVW012 CRUUS 332

EVW013 CRUUS 332

EVW014 CRUUS 332

EVW015 CRUUS 332

G1501S CE, CUL 184, 212, 68

G1502S CE 184, 212, 68

G1503S CE, CUL 184, 212, 68

Orderno.


G2001S CE, CUL 184, 212

GF711S CE, CUL 67

GG505S CE, CUL 295, 67

GG507S CE, CUL 67

GG711S CE, CUL 67

GG712S CE, CUL 67

GI505S CE, CUL 296, 67

GI506S CE, CUL 67

GI701S CE, CUL 68

GI711S CCC, CE 67

GI712S CCC, CE 68

GM504S CE, CUL 295, 67

GM505S CE, CUL 295, 67

GM701S CE, CUL 68

GM705S CE, CUL 68

I7R201 CE, CUL, (CCC) 49
















I85000 CE, CUL, (CCC) 50

I85001 CE, CUL, (CCC) 50

I85002 CE, CUL, (CCC) 50

I85003 CE, CUL, (CCC) 51

I85004 CE, CUL, (CCC) 51

I85005 CE, CUL, (CCC) 51

I85006 CE, CUL, (CCC) 51

I85007 CE, CUL, (CCC) 51

IA0032 CCC, CE, CUL 52

IA5082 CE, (CCC) 45

IA5122 CCC, CE, CUL 45

IB0004 CCC, CE 52

IB0016 CCC, CE, CUL 52

IB0017 CE, CCC 52

IB0026 CCC, CE 52

IB5063 CE, CUL, (CCC) 45

IB5096 CE, (CCC) 45

IC0003 CCC, CE, CUL 53

IC5005 CE, CUL, (CCC) 48



21

Orderno.


ID0013 CCC, CE, CUL 53

ID0014 CE, CCC 53

ID5005 CE, CUL, (CCC) 49

ID501A CE 70

ID5026 CE, (CCC) 49



ID5058 CE, (CCC) 48


IE5072 CE, (CCC) 39

IE5090 CE, CUL, (CCC) 40

IE5099 CE, (CCC) 40

IE5121 CE, (CCC) 39

IE5202 CE, (CCC) 40




IE5312 CE, (CCC) 41











IE5381 CE, (CCC) 55

IE9203 CCC, CE 61

IE9902 CCC, CE 61

IE9940 CE, (CCC) 61

IEC200 CE, CUL, (CCC) 58

IEC201 CE, CUL, (CCC) 58

IER200 CE, CUL, (CCC) 63

IER203 CE, (CCC) 63

IER204 CE, (CCC) 64

IER205 CE, (CCC) 64

IER206 CE, (CCC) 63

IF0001 CCC, CE 51

IF0003 CE, CCC 51

IF5188 CE, (CCC) 41

IF5249 CE, (CCC) 41

IF5297 CE, (CCC) 41

IF5313 CE, CCC 41

IF5329 CE, (CCC) 41

IF5345 CE, (CCC) 41

IF5597 CE, CCC 42

IF5598 CCC, CE, CUL 42

IF5645 CCC, CE 42

Orderno.


IF5646 CCC, CE 42

IF5647 CCC, CE, CUL 42

IF5750 CE, CUL, (CCC) 66


IF5815 CE, (CCC) 55

IF5853 CE, (CCC) 37



IF6030 CE, (CCC) 43

IF6031 CE, (CCC) 44

IF9222 CCC, CE 61

IF9920 CCC, CE 61

IF9924 CCC, CE 61

IFC200 CE, CUL, (CCC) 56




IFC206 CE, CUL, (CCC) 55, 60


IFC210 CE, CUL, (CCC) 56, 60


IFC234 CE, (CCC) 56

IFC235 CE, (CCC) 56

IFC258 CE, CUL 58

IFC263 CE, CUL 59

IFC264 CE, CUL 59

IFM207 CE, CUL, E1, (CCC) 66

IFM208 CE, CUL, E1, (CCC) 66

IFR200 CE, CUL, (CCC) 63





IFS200 CE, CUL, (CCC) 37











IFT201 CE, CUL, (CCC) 53




IFW200 CE, CUL, (CCC) 64

IFW201 CE, CUL, (CCC) 64



22

Orderno.


IG0005 CE, CUL, CCC 51

IG0006 CE, CUL, CCC 51

IG0011 CCC, CE, CUL 51


IG5221 CE, (CCC) 42

IG5397 CE, (CCC) 42

IG5398 CE, (CCC) 42

IG5399 CE, (CCC) 42

IG5401 CE, (CCC) 42

IG5533 CCC, CE 42

IG5594 CCC, CE 42


IG5597 CCC, CE 43

IG5647 CE, CUL, (CCC) 66


IG5682 CCC, CE 61

IG5718 CCC, CE 43

IG5846 CE, (CCC) 55



IG5953 CE, (CCC) 38

IG5954 CE, (CCC) 38

IG6083 CE, (CCC) 44

IG6084 CE, (CCC) 44

IG9983 CCC, CE 62

IG9984 CCC, CE 61

IGC200 CE, CUL, (CCC) 57





IGC210 CE, CUL, (CCC) 57, 60




IGC222 CE, (CCC) 57

IGC223 CE, (CCC) 57



IGC248 CE, CUL 59

IGC249 CE, CUL 59

IGC250 CE, CUL 59

IGR200 CE, CUL, (CCC) 63





IGS200 CE, CUL, (CCC) 38



Orderno.









IGT200 CE, CUL, (CCC) 54






IGT20A CE 70



IGW200 CE, CUL, (CCC) 65

IGW201 CE, CUL, (CCC) 65

II0005 CE, CCC 52

II0006 CE, CCC 52

II0011 CE, CUL, CCC 52

II0012 CE, CUL, CCC 52

II0366 CCC, CE, CUL 43

II5300 CE, (CCC) 43

II5369 CE, (CCC) 43

II5490 CE, CCC 43

II5492 CE, CCC 43

II5503 CE, CUL, (CCC) 66

II5811 CE, (CCC) 38



II5913 CE, (CCC) 44

II5914 CE, (CCC) 44

IIC200 CE, CUL, (CCC) 58


IIC208 CE, (CCC) 58



IIC224 CE, CUL 59

IIR200 CE, CUL, (CCC) 63





IIS204 CE, CUL, (CCC) 39



IIT205 CE, CUL, (CCC) 54

IIT228 CE, CUL, (CCC) 55

IIW200 CE, CUL, (CCC) 65



23

Orderno.


IIW201 CE, CUL, (CCC) 65

IL5002 CE, CUL, (CCC) 45



IM0010 CCC, CE, CUL 52

IM0011 CCC, CE, CUL 52

IM0049 CCC, CE 53

IM0054 CCC, CE 53

IM5020 CE, CUL, (CCC) 48

IM5037 CCC, CE 48

IM5038 CCC, CE 48




IM5119 CE, CUL, (CCC) 47, 65

IM5120 CE, CUL, (CCC) 47, 65


IM5124 CE, CUL, (CCC) 47, 65

IM5125 CE, CUL, (CCC) 48, 65

IM5126 CE, CUL, (CCC) 48, 65

IM5127 CE, (CCC) 62


IM5129 CE, CUL, (CCC) 47, 65


IM5132 CE, CUL, (CCC) 47, 65

IM5133 CE, CUL, (CCC) 47, 65



IM5137 CE, (CCC) 62

IM5138 CE, (CCC) 62

IN0073 CCC, CE 52

IN0081 CCC, CE 52

IN0108 CE, CUL 118

IN5129 CE, (CCC) 46

IN5212 CE, CUL, (CCC) 46

IN5224 CE, (CCC) 118




IO5016 CE, (CCC) 62

IO5017 CE, (CCC) 62

IO5018 CE, (CCC) 62

IS5001 CE, CUL, (CCC) 46




IT5034 CE, CUL, (CCC) 45

IT5040 CE, CUL, (CCC) 45

IV5003 CE 48

IW5051 CE, (CCC) 46

Orderno.


IW5058 CE, (CCC) 46

IW5064 CE, CUL, (CCC) 46

IY5029 CE, (CCC) 39

IY5036 CE, CUL, (CCC) 39

IY5049 CE, CUL, (CCC) 39

IZ5026 CE, CUL, (CCC) 44




JAC201 CE, (CCC) 176

KB0025 CCC, CE, CUL 94

KB0029 CCC, CE, CUL 94

KB5004 CE, CUL, (CCC) 93

KB5062 CE, (CCC) 93

KD0009 CCC, CE 94

KD0012 CCC, CE 94

KD5018 CE, (CCC) 93

KD5022 CE, (CCC) 93

KF5001 CE, CUL 92

KF5002 CE, CUL 92

KG5040 CCC, CE 92

KG5041 CE 92

KG5043 CE, (CCC) 92

KG5047 CCC, CE 92

KG5057 CE, (CCC) 92

KI0016 CCC, CE, CUL 93



KI0040 CCC, CE 94

KI5001 CE, CUL, (CCC) 92

KI5002 CE, CUL, (CCC) 92


KI5030 CCSAUS, CE, FM, IEC 95

KI5038 CE, (CCC) 92

KI5065 CE 95

KI5085 CE, CUL 93

KI5087 CE, CUL 93

KQ6005 CE, CUL 94

KX5001 CCSAUS, CE, FM 95

LI2141 CE, CUL 222

LI2142 CE, CUL 222

LI2143 CE, CUL 223

LI5141 CE, CUL 223

LI5142 CE, CUL 223

LI5143 CE, CUL 223

LI5144 CE, CUL 223

LK1022 CE, CUL 220

LK1023 CE, CUL 220

LK1024 CE, CUL 220

LK1222 CE 220



24

Orderno.


LK1223 CE 220

LK1224 CE 220

LK3122 CE, CUL 220

LK3123 CE, CUL 220

LK3124 CE, CUL 220

LK8122 CE, CUL 220

LK8123 CE, CUL 220

LK8124 CE, CUL 221

LL8022 CE, CUL 222

LL8023 CE, CUL 222

LL8024 CE, CUL 222

LR3000 CE, CUL 221

LR3300 CE, CUL 221

LR7000 CE, CUL 221

LR7300 CE, CUL 221

LR8000 CE, CUL 221

LR8300 CE, CUL 221

LT8022 CE, CUL 221

LT8023 CE, CUL 221

LT8024 CE, CUL 222

ME5010 CE, CUL, (CCC) 104

MFS200 CE, CUL, (CCC) 104

MFS202 CE, CUL, (CCC) 104

MFS203 CE, CUL 104

MGS200 CE, CUL, (CCC) 104

MGT200 CE, CUL, (CCC) 104

MGT201 CE, (CCC) 104

MK5100 CE, CUL, (CCC) 110
















MR0100 CE, UL 110

MR0101 CE, UL 111

MR0107 CE, UL 111

MS5010 CE, CUL, (CCC) 104

N0031A CE 216, 70, 95

NE5001 CCSAUS, CE, FM 69

NF5002 CCSAUS, CE, FM, IEC 69

Orderno.


NF5004 CCSAUS, CE, FM 69

NG5002 CCSAUS, CE, FM, IEC 69

NG5004 CCSAUS, CE, FM 69

NI5002 CCSAUS, CE, FM, IEC 69

NM501A CCSAUS, CE, FM 69

NN5013 CE 118

O1D100 CE, CUL, (CCC) 158








O2D220 CE, CUL 188

O2D222 CE, CUL 188

O2D224 CE, CUL 188

O2D225 CE, CUL 188

O2D227 CE, CUL 188

O2D229 CE, CUL 188

O2D900 CE, CUL 189

O2D901 CE, CUL 189

O2D902 CE, CUL 189

O2D903 CE, CUL 189

O2D904 CE, CUL 189

O2D905 CE, CUL 189

O2D906 CE 189

O2D907 CE 189

O2D908 CE 189

O2D909 CE, (CCC) 188, 308

O2D910 CE 189

O2D911 CE 189

O2D912 CE 189

O2I100 CE, CUL 308

O2I102 CE, CUL 308

O2I104 CE, CUL 308

O3D200 CE 191

O3D201 CE 191

O4P200 CE, CUL, (CCC) 134


O5E200 CE, CUL, (CCC) 133



O5H200 CE, CUL, (CCC) 133









25

Orderno.



O5S200 CE, CUL, (CCC) 133



O7E200 CE, UL 130

O7E201 CE, UL 130

O7H200 CE, UL 131

O7H202 CE, UL 131

O7H204 CE, UL 131

O7P200 CE, UL 130

O7P201 CE, UL 131

O7S200 CE, UL 130

OBF500 CE, CUL, (CCC) 162

OD5005 CE, (CCC) 176

OD5007 CE, (CCC) 176

OD5011 CE, (CCC) 176

OF5012 CE, CUL, (CCC) 126






OG0034 CCC, CE 127

OG5123 CE, CUL, (CCC) 128







OGE200 CE, CUL, (CCC) 126




OGE701 CE, (CCC) 146

OGH200 CE, CUL, (CCC) 127











OGP200 CE, CUL, (CCC) 126

OGP201 CE, (CCC) 127



Orderno.









OGS200 CE, CUL, (CCC) 126




OGT200 CE, CUL, (CCC) 127

OH5004 CE, (CCC) 130

OH5005 CE, (CCC) 130

OH5006 CE, (CCC) 130

OH5007 CE, (CCC) 130

OH5008 CE, (CCC) 130

OH5011 CE, (CCC) 130

OJ5004 CE, CUL, (CCC) 132


































26

Orderno.














OK5001 CCC, CE, CUL 164

OK5008 CCC, CE, CUL 164

OO5000 CE, CUL, (CCC) 162





OPL200 CE, CUL, (CCC) 177




OPU200 CE, (CCC) 176

OPU201 CE, CUL, (CCC) 177




OPU207 CE, (CCC) 177





OU5001 CCC, CE, CUL 164




OY001S CE, CUL, (CCC) 184









PA3020 CE, CUL 258

PA3021 CE, CUL 258

PA3022 CE, CUL 258

PA3023 CE, CUL 258

Orderno.


PA3024 CE, CUL 258

PA3026 CE, CUL 258

PA3027 CE, CUL 258

PA3029 CE, CUL 258

PA3060 CE 258

PA9020 CE 258

PA9021 CE 258

PA9022 CE, CUL 258

PA9023 CE, CUL 258

PA9024 CE, CUL 258

PA9026 CE, CUL 259

PA9027 CE, CUL 259

PA9028 CE, CUL 259

PA9029 CE, CUL 259

PA9060 CE 258

PE7003 CE, CUL 262

PE7004 CE, CUL 262

PF2609 CE, CUL, EHEDG, FDA 261







PG2793 CE, CUL, EHEDG, FDA 261



PI2995 CE, CUL, FDA 260

PK5520 CE, CUL 253

PK5521 CE, CUL 253

PK5522 CE, CUL 254

PK5523 CE, CUL 254

PK5524 CE, CUL 254

PK6520 CE, CUL 254

PK6521 CE, CUL 254

PK6522 CE, CUL 254

PK6523 CE, CUL 254

PK6524 CE, CUL 254

PK6730 CE, CUL 254

PK6731 CE, CUL 254

PK6732 CE, CUL 255

PK6734 CE, CUL 255

PK7520 CE, CUL 254

PK7521 CE, CUL 254

PK7522 CE, CUL 254

PK7524 CE, CUL 254

PK8730 CE, CUL 255

PK8731 CE, CUL 255

PK8732 CE, CUL 255

PK8734 CE, CUL 255



27

Orderno.


PN009A CE 260

PN2009 CE, CUL 250

PN2020 CE, CUL 250

PN2021 CE, CUL 250

PN2022 CE, CUL 250

PN2023 CE, CUL 250

PN2024 CE, CUL 250

PN2026 CE, CUL 250

PN2027 CE, CUL 250

PN2028 CE, CUL 250

PN2220 CE, CUL 250

PN2221 CE, CUL 250

PN2222 CE, CUL 250

PN2223 CE, CUL 250

PN2224 CE, CUL 250

PN2226 CE, CUL 250

PN2227 CE, CUL 251

PN2228 CE, CUL 251

PN3000 CE, CUL 251

PN3001 CE, CUL 251

PN3002 CE, CUL 251

PN3003 CE, CUL 251

PN3004 CE, CUL 251

PN3006 CE, CUL 251

PN3007 CE, CUL 251

PN3029 CE, CUL 251

PN3060 CE 251

PN5000 CE, CUL 251

PN5001 CE, CUL 251

PN5002 CE, CUL 252

PN5003 CE, CUL 252

PN5004 CE, CUL 252

PN5006 CE, CUL 252

PN5007 CE, CUL 252

PN7000 CE, CUL 252

PN7001 CE, CUL 252

PN7002 CE, CUL 252

PN7003 CE, CUL 252

PN7004 CE, CUL 252

PN7006 CE, CUL 252

PN7007 CE, CUL 252

PN7009 CE, CUL 252

PN7060 CE 252

PN7200 CE, CUL 252

PN7201 CE, CUL 252

PN7202 CE, CUL 253

PN7203 CE, CUL 253

PN7204 CE, CUL 253

PN7206 CE, CUL 253

PN7207 CE, CUL 253

Orderno.


PN7809 CE, CUL 260

PN7834 CE, CUL 260

PNI021 CE 259

PNI022 CE 259

PNI023 CE 260

PNI024 CE 260

PP0520 CE 256

PP0521 CE 256

PP0522 CE, CUL 256

PP0523 CE, CUL 257

PP0524 CE, CUL 257

PP2001 CE, CUL 262

PP7550 CE 256

PP7551 CE 256

PP7552 CE, CUL 256

PP7553 CE, CUL 256

PP7554 CE, CUL 256

PP7556 CE, CUL 256

PQ7809 CE, CUL 260

PQ7834 CE, CUL 260

PS3208 CE 222, 259

PS3407 CE 222, 259

PS7570 CE 259

PT3540 CE, CUL 255

PT3541 CE, CUL 255

PT3542 CE, CUL 255

PT3543 CE, CUL 255

PT3544 CE, CUL 255

PT3550 CE, CUL 257

PT3551 CE, CUL 257

PT3552 CE, CUL 257

PT3553 CE, CUL 257

PT3554 CE, CUL 257

PT9540 CE, CUL 255

PT9541 CE, CUL 256

PT9542 CE, CUL 256

PT9543 CE, CUL 256

PT9544 CE, CUL 256

PT9550 CE, CUL 257

PT9551 CE, CUL 257

PT9552 CE, CUL 257

PT9553 CE, CUL 257

PT9554 CE, CUL 257

PY7000 CE 253

PY7001 CE 253

PY7002 CE 253

PY7003 CE 253

RU1024 CE, C_NRTL_US 198

RV1033 CE, C_NRTL_US 198

RV6016 CE, C_NRTL_US 198



28

Orderno.


SBY323 CE 234

SBY332 CE, CUL 234

SBY333 CE, CUL 234

SBY334 CE, CUL 234

SBY346 CE, CUL 234

SBY357 CE, CUL 234

SD2000 CE, CUL 237

SD5000 CE, CUL 237

SD5100 CE, CUL 238

SD6000 CE, CUL 237

SD6100 CE, CUL 238

SD8000 CE, CUL 237

SD9000 CE, CUL 237

SF121A 236

SF311A TIIS 236

SF320A IEC 236

SF5200 CUL 235

SF5201 CUL 235

SF5300 CUL 235

SF5350 CUL 235

SF5700 CUL 235

SF6200 CUL 235

SI5000 CE, CUL 233

SI5001 CE, CUL 233

SI5002 CE, CUL 233

SI5003 CE, CUL 233

SI5004 CE, CUL 233

SI5007 CE, CUL 234

SI500A CE 234

SI5010 CE, CUL 233

SI5011 CE, CUL 233

SI5100 CE 233

SL5101 CE 237

SM6000 CE, CUL 232

SM6004 CE, CUL 232

SM6050 CE, CUL 232

SM7000 CE, CUL 232

SM7004 CE, CUL 232

SM7050 CE, CUL 232

SM8000 CE, CUL 232

SM8004 CE, CUL 232

SM8050 CE, CUL 232

SN0150 CE, CUL 235

SN0151 CE, CUL 236

SN2301 CE, IEC 237

SQ0500 CE, CUL 238

SR0150 CE, CUL 236

SR2301 CE, IEC 237

SR5900 CE, CUL 236

SU7000 CE, CUL 238

Orderno.


SU7200 CE, CUL 238

SU8000 CE, CUL 238

SU8200 CE, CUL 238

SU9000 CE, CUL 238

SU9004 CE, CUL 239

TA3130 CE, CUL 276

TA3131 CE, CUL 276

TA3171 CE, CUL 276

TA3231 CE, CUL 277

TA3237 CE, CUL 277

TA3333 CE, CUL 276

TA3337 CE, CUL 276

TA3430 CE, CUL, EHEDG 277

TK6130 CE, CUL 272

TK6330 CE, CUL 272

TK7130 CE, CUL 272

TK7330 CE, CUL 272

TK7480 CE, CUL 272

TN2531 CE, CUL 272

TN7531 CE, CUL 272

TP3231 CE, CUL 273

TP3232 CE, CUL 273

TP3233 CE, CUL 273

TP3237 CE, CUL 273

TR2432 CE, CUL 273

TR7432 CE, CUL 273

TR8430 CE, CUL 272

TS0759 275

TS2051 CUL 275, 276

TS2056 275, 276

TS2151 275

TS2229 276

TS2251 275

TS2256 275

TS2659 275

TS2759 275

TS4759 275

TS5051 CUL 275, 276

TS5151 275

TS9281 275

TT1050 CUL 274

TT1081 CUL 274

TT1150 CUL 273

TT1181 CUL 274

TT1250 CUL 273

TT2050 CUL 274

TT2081 CUL 274

TT2181 CUL 274

TT3050 CUL 274

TT3081 CUL 274



29

Orderno.


TT3150 CUL 273

TT3181 CUL 274

TT5050 CUL 274

TT5081 CUL 274

VB1001 CE, CUL 286

VE1001 CE, CUL 286

VE1101 CE, CUL 286

VE1103 CE, CUL 286

VES001 286

VES003 287

VKV021 CE, CUL 287

VSA001 CE, CUL 288

VSA002 CE, CUL 288

VSA003 CE, CUL 288

VSE002 CE, CUL 287

VSE100 CE, CUL 287

Sensors for specificapplications


30



31

Selection chart Page

AS-i sensors 32

Sensors for hazardous areas (ATEX) 32

Sensors with IO-Link 33

Sensors for safety technology 33



32

AS-Interface

AS-interface (actuator sensor interface)is a worldwide manufacturer-indepen-dent standard for the connection ofactuators and sensors of the first fieldlevel. Data and power supply are jointlytransmitted via a two-wire cable. Wiringcomplexity, documentation and set-uptimes are reduced.

AS-i sensors Page

AS-i sensors 296

ATEX

ATEX (Atmosphère explosible) is a briefdescription of the uniform EU directives94/9/EC (for manufactures of units for hazardous areas) and 1999/92/EC(for operators of plants for hazardousareas) governing the safety require-ments for explosion-hazardous areas.Since 30 June 2003, units for hazardousareas have to be approved to 94/9/EU regulations. For further informationabout international directives see the“Approvals” chapter.

Sensors for hazardous areas (ATEX) Page


Capacitive sensors 95

Valve sensors 118

Flow sensors 234 - 234236 - 236

Pressure sensors 260

Diagnostic systems 286



33

IO-Link

IO-Link is a field-bus independent andopen point-to-point communicationinterface. It is a low-cost possibility totransmit parameter, diagnosis and process data from a sensor or an actuator via an I/O module.

Sensors with IO-Link Page

Pressure sensors 256 - 257

Temperature sensors 272 - 273

Safety

The EC Machinery Directive stipulatesmachinery should not present a risk. Ifsafety is dependent on control systems,these must be designed so as to minimise malfunction. The IEC 62061und ISO 13849-1 standards apply. Classification is made either in the Safety Integrity Level (SIL 1-3 in IEC 62061) or in the Performance Level(PL a-e in ISO 13849-1).

Sensors for safety technology Page


Safety light curtains 184

Sensors for almost all application areas.

Wide choice of housing styles andoperating voltages.

High-quality housing materials.

Cylindrical housings: Ø 3…34 mm, rectan-gular housings: 5 x 5 x 24 to 105 x 80 x 40.

Extensive range of fixing accessoriesand connection technology.

Inductive sensors

In all automated processes sensors are absolutely necessary to provide the PLC withinformation. They supply the necessary signals on positions, limits or serve as pulsepick-ups for counting tasks or for monitoring rotational speed. Inductive andcapacitive sensors are nowadays indispensable for industrial usage. As compared tomechanical switches they offer ideal conditions: non-contact operation free fromany wear and tear, high switching frequencies and accuracy. In addition, they areinsensitive to vibration, dust and moisture. Inductive sensors detect all metalswithout contact.

Operating principle of inductive sensors

Inductive sensors take advantage of the physical effect of the change in the qualityfactor in a resonant circuit caused by eddy current losses in conductive materials.This is how it works: An LC tuned circuit generates a high frequency electromag-netic field. This field is radiated from the active face of the sensor. If a conductivematerial enters this field, eddy currents will be formed in accordance with the lawof inductance which draw energy from the oscillator. This reduces the oscillationamplitude. The change is converted into a switching signal. The operating principlepermits detection of all metals irrespective of whether they are moving or not.

Application sensors

Every application has its own requirements as regards the sensors to be used.Temperature shocks, mechanical influences or aggressive cleaning agents are just afew of the possible environmental influences to which sensors are subjected. ifmelectronic therefore offers inductive sensors which have been developed for specialapplications. This includes for example the use of selected housing materials suchas stainless steel, LCP, PEEK, PBT or Duroplast. An innovative, consistent sealingconcept from the sensor to the connector ensures ideal protection against ingressof moisture and aggressive media.

Typical application:Positioning sensing inautomation technol-ogy; inductive sensorsoperate reliably andwithout wear.

High frequencyelectromagnetic field:The inductive sensor

detects all metals.

Inductive sensors

34

Inductive sensors

35


Sensors with increased sensing range for industrial applications 37 - 39

Sensors for industrial applications, threaded housings 39 - 43

Sensors with analogue output 4...20 mA for industrial applications 43 - 44

Sensors with analogue output 0...10 V for industrial applications 44

Sensors with smooth sleeve for industrial applications 44 - 45

Sensors for industrial applications, rectangular housings 45 - 49

Ring sensors for industrial applications 49 - 50

Tube sensors for industrial applications 50 - 51

Sensors for industrial applications, AC and AC/DC 51 - 53

Sensors for hygienic and wet areas with increased sensing range 53 - 54

Full-metal sensors for hygienic and wet areas 55

Sensors for hygienic and wet areas 55

Sensors for oils and coolants with increased sensing range 55 - 58

Full-metal sensors for oils and coolants 58 - 59

Full metal sensors for oils and coolants with correction factor K = 0 59 - 60

Sensors for oils and coolants with correction factor K = 1 60

Sensors for oils and coolants with ceramic sensing face 60

Sensors for oils and coolants, threaded housings 61 - 62

Sensors for oils and coolants, rectangular housings 62

Full-metal sensors with non-stick coating against weld spatter 63 - 64

Electromagnetic field immune sensors with correction factor K = 1 64 - 65

Electromagnetic field immune sensors 66

Sensors for mobile applications 66

Fail-safe inductive sensors for series connection to IEC 62061 SILcl 3 and ISO 13849-1 PL e 67

Inductive sensors for safety-related applications, 2 x OSSD, SIL 2, PL d 67 - 68

Inductive sensors for safety-related applications, 2 x OSSD, SIL 3, PL e 68

Safety relays with relay outputs for fail-safe sensors 68

Safety relays with solid state outputs for fail-safe sensors 68

Sensors with ATEX approval 1D / 2G 69

Sensors with ATEX approval 1D / 1G / 2G 69

Sensors with ATEX approval 2D 70



Switching amplifiers with ATEX approval 70

Accessories for sensors with smooth sleeve 70

Accessories for threaded M8 housings 71




Accessories for rectangular housings 73

System components 73

Wiring diagrams 73 - 76

Scale drawings / drawing no. – CAD download: www.ifm.com 76 - 89

Inductive sensors

36

Sensors with increased sensing range for industrial applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19

M12 / L = 45 4 f brass 10...36 IP67 700 100 1 IFS204

M12 / L = 50 7 nf brass 10...36 IP67 700 100 2 IFS205


M12 / L = 45 4 f brass 10...36 IP67 700 100 1 IFS206

M12 / L = 50 7 nf brass 10...36 IP67 700 100 2 IFS207

M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7, 8, 19

M12 / L = 70 4 f brass 10...30 IP67 500 100 3 IFS208

M12 / L = 70 7 nf brass 10...30 IP67 500 100 4 IFS209

M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 26 · Connector groups 7, 8, 19

M12 / L = 45 4 f brass 10...30 IP67 700 100 1 IFS200

M12 / L = 50 7 nf brass 10...30 IP67 700 100 2 IFS201


M12 / L = 46 4 f brass 10...36 IP67 700 100 5 IFS210

Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8, 19

M12 / L = 40 4 f brass 10...36 IP67 110 100 6 IF5853


M18 / L = 46 8 f brass 10...36 IP67 400 100 7 IGS204

Inductive sensors

37You can find wiring diagrams and scale drawings from page 73

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 51 12 nf brass 10...36 IP67 300 100 8 IGS205

M18 / L = 70 8 f brass 10...36 IP67 400 100 9 IGS212


M18 / L = 46 8 f brass 10...36 IP67 400 100 7 IGS206

M18 / L = 51 12 nf brass 10...36 IP67 300 100 8 IGS207


M18 / L = 70 8 f brass 10...30 IP67 400 100 9 IGS208

M18 / L = 70 12 nf brass 10...30 IP67 300 100 10 IGS209


M18 / L = 46 8 f brass 10...30 IP67 300 100 7 IGS200

M18 / L = 51 12 nf brass 10...30 IP67 250 100 8 IGS201


M18 / L = 70 8 f CuZn 10...36 IP68 400 100 11 IG5953

M18 / L = 72 12 nf brass 10...36 IP67 250 100 12 IG5954

M12 connector · Output function · 2-wire · AC/DC · Wiring diagram no. 4 · Connector group —

M18 / L = 53 8 f brass 20...140 IP67 25 / 100 200 13 IG0402

Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8, 19

M30 / L = 44 12 f brass 10...36 IP67 100 100 14 II5811

Inductive sensors

38Product selectors and further information can be found at: www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M30 / L = 50 15 f brass 10...36 IP67 100 100 15 IIS204


M30 / L = 50 15 f brass 10...36 IP67 100 100 15 IIS208


M30 / L = 70 15 f brass 10...30 IP67 100 100 16 IIS206

f = flush / nf = non flush

Sensors for industrial applications, threaded housings

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5

M5 / L = 30 0.8 f stainless steel 10...36 IP65 2000 100 17 IY5029

M5 / L = 27 1.5 nf stainless steel 10...30 IP67 1800 100 18 IY5049


M5 / L = 45 0.8 f stainless steel 10...36 IP65 2000 100 19 IY5036


M8 / L = 35 1 f brass 10...36 IP67 750 200 20 IE5072

M8 / L = 50 1 f brass 10...36 IP67 750 200 21 IE5121

M8 / L = 20 1.5 f stainless steel 10...30 IP67 4000 200 22 IE5348

M8 / L = 27 2 f high-grade st. steel 10...30 IP67 1500 100 23 IE5368

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M8 / L = 35 2 nf PBT 10...36 IP67 800 200 20 IE5099

Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 28

M8 / L = 50 2 nf PBT (Pocan) 5...36 IP67 2000 200 21 IE5202

Cable 2 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 29

M8 / L = 37 3 f brass 10...30 IP67 1000 100 24 IE5343

Cable with connector 0.3 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 1, 2, 3

M8 / L = 37 3 f brass 10...30 IP67 1000 100 24 IE5344

Cable with connector 0.3 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7, 8, 19

M8 / L = 37 3 f brass 10...30 IP67 1000 100 24 IE5351

M8 / L = 37 5 nf brass 10...30 IP67 700 100 25 IE5352


M8 / L = 50 2 f brass 10...36 IP67 1000 250 26 IE5287

M8 / L = 30 2 f high-grade st. steel 10...30 IP67 / 1500 100 27 IE5366

M8 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 1,2, 3

M8 / L = 40 3 f brass 10...30 IP67 1000 100 28 IE5338

M8 / L = 40 5 nf high-grade st. steel 10...30 IP67 700 100 29 IE5340


M8 / L = 53 1 f brass 10...36 IP67 750 200 30 IE5090

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M8 / L = 62 2 f brass 10...36 IP67 1000 250 31 IE5312

M8 / L = 62 4 nf brass 10...36 IP67 300 200 32 IE5288


M8 / L = 62 2 f brass 10...36 IP67 800 250 33 IE5327


M8 / L = 69 1 f brass 5...36 IP67 2700 200 34 IE5203


M12 / L = 45 2 f brass 10...36 IP67 700 100 1 IFS214

M12 / L = 70 2 f brass 10...36 IP67 700 100 3 IFS216


M12 / L = 35 2 f brass 10...36 IP67 1500 150 35 IF5188

M12 / L = 71 2 f brass 10...55 IP67 800 250 36 IF5297

M12 / L = 71 2 f PBT 10...55 IP67 800 250 36 IF5313

M12 / L = 35 4 nf brass 10...36 IP67 1500 150 37 IF5249

M12 / L = 71 4 nf brass 10...36 IP67 1500 250 38 IF5329

M12 / L = 71 4 nf PBT 10...36 IP67 400 250 36 IF5345

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 71 2 f brass 10...55 IP67 1100 400 36 IF5645

M12 / L = 71 4 nf brass 10...55 IP67 1500 400 38 IF5646

M12 / L = 71 4 nf PBT 10...55 IP67 1500 400 36 IF5597


M12 / L = 83 2 f brass 10...55 IP67 1100 300 39 IF5598

M12 / L = 83 4 nf brass 10...55 IP67 1500 300 40 IF5647


M18 / L = 70 5 f brass 10...36 IP67 400 100 9 IGS216


M18 / L = 38 5 f brass 18...36 IP67 500 150 41 IG5221

M18 / L = 80 5 f brass 10...36 IP67 500 250 42 IG5397

M18 / L = 80 5 f PBT 10...36 IP67 500 250 42 IG5399

M18 / L = 80 8 nf brass 10...36 IP67 300 250 43 IG5398

M18 / L = 80 8 nf PBT 10...36 IP67 300 250 42 IG5401


M18 / L = 80 5 f brass 10...55 IP67 700 400 42 IG5594

M18 / L = 80 8 nf PBT 10...55 IP67 300 400 42 IG5533

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 70 5 f brass 10...55 IP67 700 400 44 IG5595

M18 / L = 76 8 nf brass 10...55 IP67 300 400 45 IG5597

Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 30

M18 / L = 110 5 f PBT 10...55 IP65 800 400 46 IG5718


M30 / L = 81 10 f PBT 10...36 IP67 250 250 47 II5369

M30 / L = 81 15 nf PBT 10...36 IP67 250 250 47 II5300


M30 / L = 78 10 f brass 10...55 IP67 450 400 48 II5490

M30 / L = 78 15 nf brass 10...55 IP67 200 400 49 II5492


M30 / L = 58 15 f brass 20...140 IP67 25 200 50 II0366


Sensors with analogue output 4...20 mA for industrial applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function 4...20 mA analogue · 3-wire · DC analogue · Wiring diagram no. 6 · Connector groups 7, 8

M12 / L = 70 0.4...4 nf brass 15...30 IP67 – – 4 IF6030

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function 4...20 mA analogue · 3-wire · DC analogue · Wiring diagram no. 6 · Connector groups 7, 8

M18 / L = 60 0.8...8 nf brass 15...30 IP67 – – 51 IG6083

M30 / L = 70 1.0...15 nf brass 15...30 IP67 – – 52 II5913


Sensors with analogue output 0...10 V for industrial applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function 0...10 V analogue · 3-wire · DC analogue · Wiring diagram no. 6 · Connector groups 7, 8

M12 / L = 70 0.4...4 nf brass 15...30 IP67 – – 4 IF6031

M18 / L = 60 0.8...8 nf brass 15...30 IP67 – – 51 IG6084

M30 / L = 70 1.0...15 nf brass 15...30 IP67 – – 52 II5914


Sensors with smooth sleeve for industrial applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


Ø 4 / L = 30 0.8 f stainless steel 10...36 IP65 2000 100 53 IZ5026

Ø 4 / L = 27 1.5 nf stainless steel 10...30 IP67 1800 100 54 IZ5047


Ø 4 / L = 45 0.8 f stainless steel 10...36 IP65 2000 100 55 IZ5035

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group —

Ø 4 / L = 41 1.5 nf stainless steel 10...30 IP67 1800 100 56 IZ5046


Ø 6.5 / L = 49 1.5 f brass 10...36 IP65 2000 250 57 IT5034

Ø 6.5 / L = 30 2 f high-grade st. steel 10...30 IP67 1500 100 58 IT5040


Ø 20 / L = 77 10 nf PBT 10...36 IP67 300 250 59 IA5082


Ø 20 / L = 92 10 nf PBT 10...55 IP65 300 300 60 IA5122


Ø 34 / L = 82 20 nf PBT 10...36 IP67 60 250 61 IB5096

Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 7

Ø 34 / L = 98 20 nf PBT 10...36 IP65 350 250 62 IB5063


Sensors for industrial applications, rectangular housings

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


25 x 5 x 5 0.8 f aluminium 10...30 IP65 1000 100 63 IL5022

40 x 8 x 8 2 f brass 10...36 IP65 2000 250 64 IL5002

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


40 x 8 x 8 2 f brass 10...36 IP65 2000 250 65 IL5004


28 x 10 x 16 2 f PBT 10...36 IP67 800 200 66 IS5001


28 x 10 x 16 2 f PBT 5...36 IP67 2000 200 66 IS5026


28 x 10 x 16 2 f PBT 10...36 IP67 800 200 67 IS5035

28 x 10 x 16 4 nf PBT 10...36 IP67 2000 250 67 IS5071


40 x 12 x 26 4 nf PBT 10...36 IP67 1300 250 68 IN5129


40 x 12 x 26 2 f PBT 10...36 IP67 1400 250 69 IN5230

40 x 12 x 26 4 nf PBT 10...36 IP65 1300 250 69 IN5212


60 x 36 x 10 5 f PBT 10...36 IP67 400 250 70 IW5051

60 x 36 x 10 8 nf PBT 10...36 IP67 300 250 71 IW5058


60 x 36 x 10 8 nf PBT 10...36 IP65 300 250 72 IW5064

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8

40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 100 200 73 IM5115



40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 80 200 73 IM5116














Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.








40 x 40 x 120 15 f PPE 10...36 IP65 350 250 75 IM5020


40 x 40 x 120 15 f PPE 10...55 IP65 > 350 400 75 IM5037

40 x 40 x 120 20 nf PPE 10...55 IP65 > 300 400 75 IM5038


40 x 40 x 118 15 f PBT 10...60 IP67 150 200 76 IV5003


90 x 60 x 40 40 nf PPE 10...36 IP65 15 250 77 IC5005


92 x 80 x 40 50 f PPE 10...36 IP67 70 250 78 ID5055


92 x 80 x 40 50 f PPE 10...36 IP67 70 250 78 ID5058

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


105 x 80 x 40 60 nf PPE 10...36 IP65 100 250 79 ID5005

M12 connector · Output function normally open / closed programmable *) · 3-wire · DC PNP · Wiring diagram no. 1 · Connectorgroups 7, 8

105 x 80 x 40 60 nf PPE 10...36 IP67 100 250 80 ID5046


120 x 80 x 30 50 nf PPE 10...36 IP67 100 250 81 ID5026


Ring sensors for industrial applications

Type Insidediameter

[mm]

Operatingprinciple

Minimumdiameter ofthe steel ball

[Ø mm]

Part speedmax.

[m/s]

Pulsestretching

[ms]

Response time /break time

[ms]

Draw-ingno.

Orderno.


10.1 static 1.5 35 10...150 0.5 / 10 82 I7R201

10.1 dynamic 0.6 35 0.1...150 0.2 / 0.2 82 I7R203

15.1 static 2 35 10...150 0.5 / 10 83 I7R205

15.1 dynamic 0.8 35 0.1...150 0.2 / 0.2 83 I7R207

20.1 static 2.5 35 10...150 0.5 / 10 84 I7R209

20.1 dynamic 1.0 35 0.1...150 0.2 / 0.2 84 I7R211

25.1 static 3.0 35 10...150 0.5 / 10 85 I7R213

25.1 dynamic 1.2 35 0.1...150 0.2 / 0.2 85 I7R215

Inductive sensors


Type Insidediameter

[mm]

Operatingprinciple


[Ø mm]

Part speedmax.

[m/s]

Pulsestretching

[ms]


[ms]

Draw-ingno.

Orderno.

M12 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 11 · Connector groups 7, 8

10.1 static 1.5 35 10...150 0.5 / 10 82 I7R202

10.1 dynamic 0.6 35 0.1...150 0.2 / 0.2 82 I7R204

15.1 static 2 35 10...150 0.5 / 10 83 I7R206

15.1 dynamic 0.8 35 0.1...150 0.2 / 0.2 83 I7R208

20.1 static 2.5 35 10...150 0.5 / 10 84 I7R210

20.1 dynamic 1.0 35 0.1...150 0.2 / 0.2 84 I7R212

25.1 static 3.0 35 10...150 0.5 / 10 85 I7R214

25.1 dynamic 1.2 35 0.1...150 0.2 / 0.2 85 I7R216

Tube sensors for industrial applications

Type Sensingrange

[mm]

Operatingprinciple


[Ø mm]

Part speedmax.

[m/s]

Pulsestretching

[ms]


[ms]

Draw-ingno.

Orderno.


≤ 14 static 3.0 35 100 0.5 / 100 86 I85000


≤ 14 static 3.0 35 100 0.5 / 100 86 I85001

Cable with connector 0.09 m · Output function · 3-wire · DC PNP · Wiring diagram no. 10 · Connector groups 7, 8

≤ 14 static 3.0 35 100 0.5 / 100 87 I85002

Inductive sensors


Type Sensingrange

[mm]

Operatingprinciple


[Ø mm]

Part speedmax.

[m/s]

Pulsestretching

[ms]


[ms]

Draw-ingno.

Orderno.

Cable with connector 0.09 m · Output function · 3-wire · DC NPN · Wiring diagram no. 11 · Connector groups 7, 8

≤ 14 static 3.0 35 100 0.5 / 100 87 I85003


≤ 20 dynamic 1.0 35 100 0.2 / 100 86 I85004


≤ 20 dynamic 1.0 35 100 0.2 / 100 86 I85005


≤ 20 dynamic 1.0 35 100 0.2 / 100 87 I85006


≤ 20 dynamic 1.0 35 100 0.2 / 100 87 I85007

Sensors for industrial applications, AC and AC/DC

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

Cable 2 m · Output function · 2-wire · AC · Wiring diagram no. 12

M12 / L = 71 2 f PBT 20...250 IP67 25 250 36 IF0001*

M12 / L = 71 4 nf PBT 20...250 IP67 25 250 36 IF0003*

Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 13

M18 / L = 80 5 f PBT 20...250 IP67 25 / 50 350 / 100 42 IG0005*

M18 / L = 80 5 f brass 20...250 IP67 25 / 50 350 / 100 42 IG0011*

M18 / L = 80 8 nf PBT 20...250 IP67 25 / 50 350 / 100 42 IG0006*

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 14

Ø 20 / L = 92 10 nf PBT 20...250 IP65 25 / 70 350 / 100 60 IA0032*


M30 / L = 81 10 f PBT 20...250 IP67 25 / 50 350 / 100 47 II0005*

M30 / L = 81 10 f brass 20...250 IP67 25 / 50 350 / 100 47 II0011*

M30 / L = 81 15 nf PBT 20...250 IP67 25 / 50 350 / 100 47 II0006*

M30 / L = 81 15 nf brass 20...250 IP67 25 / 50 350 / 100 88 II0012*

Ø 34 / L = 82 20 nf PBT 20...250 IP67 25 / 50 350 / 100 61 IB0004*

Ø 34 / L = 82 30 nf PBT 20...250 IP67 25 / 50 350 / 100 61 IB0026*


Ø 34 / L = 82 20 nf PBT 20...250 IP67 25 / 50 350 / 100 61 IB0017*


Ø 34 / L = 98 20 nf PBT 20...250 IP65 25 / 50 350 / 100 62 IB0016*


40 x 12 x 26 2 f PBT 20...250 IP67 25 / 50 350 / 100 68 IN0073*

40 x 12 x 26 4 nf PBT 20...250 IP67 25 / 50 350 / 100 68 IN0081*


40 x 40 x 120 15 f PPE 20...250 IP65 20 / 55 350 / 100 75 IM0011*

40 x 40 x 120 20 nf PPE 20...250 IP65 20 / 55 350 / 100 75 IM0010*

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

1/2“ connector · Output function · 2-wire · AC/DC · Wiring diagram no. 16 · Connector group 16

40 x 40 x 66 35 nf PPE 20...250 IP67 20 / 50 350 / 100 89 IM0049*


40 x 40 x 66 20 f PPE 20...250 IP67 25 / 140 350 / 100 90 IM0054*


90 x 60 x 40 40 nf PPE 20...250 IP65 10 350 / 100 77 IC0003*


120 x 80 x 30 50 nf modified PPE 20...250 IP65 25 / 35 350 / 100 81 ID0014*


105 x 80 x 40 60 nf modified PPE 20...250 IP65 4 350 / 100 79 ID0013*


* Note for AC and AC/DC units

Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.

Sensors for hygienic and wet areas with increased sensing range

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 45 4 f high-grade st. steel 10...36 IP68 / IP69K 800 100 1 IFT203



M12 / L = 50 7 nf high-grade st. steel 10...36 IP68 / IP69K 800 100 91 IFT201

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 46 8 f high-grade st. steel 10...36 IP68 / IP69K 600 100 7 IGT203

M18 / L = 51 12 nf high-grade st. steel 10...36 IP68 / IP69K 300 100 92 IGT200



M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector group —





Cable 6 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 29

Ø 18 / L = 81 12 nf high-grade st. steel 10...30 IP68 / IP69K 300 100 96 IGT212


M30 / L = 50 14 f high-grade st. steel 10...36 IP68 / IP69K 50 100 15 IIT205


Inductive sensors


Full-metal sensors for hygienic and wet areas

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.




M30 / L = 70 10 f high-grade st. steel 10...36 IP68 / IP69K 50 100 98 IIT228


Sensors for hygienic and wet areas

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 44 2 f high-grade st. steel 10...36 IP67 1200 250 99 IF5815


M18 / L = 45 10 nf high-grade st. steel 10...36 IP67 300 250 100 IG5846


Sensors for oils and coolants with increased sensing range

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M8 / L = 50 2 f high-grade st. steel 10...36 IP67 1000 200 101 IE5381

M12 / L = 45 4 f brass 10...36 IP68 700 100 1 IFC204

M12 / L = 45 4 f brass 10...36 IP68 700 100 1 IFC206

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 45 4 f brass 10...36 IP68 700 100 1 IFC207


M12 / L = 45 4 f brass 10...30 IP68 700 100 1 IFC200

M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector group 37

M12 / L = 60 4 f brass 10...36 IP68 700 100 102 IF5934


M12 / L = 70 4 f brass 10...30 IP68 500 100 3 IFC210

M12 connector · Output function · 2-wire · DC · Wiring diagram no. 27 · Connector groups 7, 8, 19

M12 / L = 60 4 f brass 10...36 IP68 700 100 97 IFC234


M12 / L = 50 7 nf brass 10...36 IP68 700 100 2 IFC205


M12 / L = 50 7 nf brass 10...30 IP68 700 100 2 IFC201


M12 / L = 60 7 nf brass 10...36 IP68 500 100 103 IFC235


M12 / L = 60 7 nf brass 10...36 IP68 700 100 103 IF5935

M12 / L = 60 4 f brass 10...36 IP68 700 100 102 IF5934

M12 / L = 60 7 nf brass 10...36 IP68 700 100 103 IF5935

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 46 8 f brass 10...36 IP68 400 100 7 IGC204

M18 / L = 46 8 f brass 10...36 IP68 400 100 7 IGC206


M18 / L = 46 8 f brass 10...36 IP68 400 100 7 IGC207


M18 / L = 46 8 f brass 10...30 IP68 400 100 7 IGC200


M18 / L = 70 8 f brass 10...30 IP68 400 100 9 IGC222


M18 / L = 70 8 f brass 10...30 IP68 400 100 9 IGC210


M18 / L = 70 8 f brass 10...36 IP68 400 100 11 IG5951


M18 / L = 51 12 nf brass 10...36 IP68 300 100 8 IGC205

M18 / L = 60 12 nf brass 10...36 IP68 300 200 51 IGC220


M18 / L = 70 12 nf brass 10...36 IP68 300 100 10 IGC223


M18 / L = 70 12 nf brass 10...36 IP68 300 100 94 IG5952

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M30 / L = 50 15 f brass 10...36 IP68 100 100 15 IIC200


M30 / L = 70 15 f brass 10...30 IP68 100 100 16 IIC208


M30 / L = 72 15 f brass 10...36 IP68 100 100 104 II5858


M30 / L = 50 22 nf brass 10...36 IP68 100 100 105 IIC201


M30 / L = 72 22 nf brass 10...36 IP68 100 100 106 II5859


Full-metal sensors for oils and coolants

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M8 / L = 50 2 fstainless steel 316L /

1.440410...36 IP67 100 100 107 IEC201


M8 / L = 60 2 f high-grade st. steel 10...36 IP67 / IP68 100 100 108 IEC200


M12 / L = 60 3 f high-grade st. steel 10...36 IP67 / IP68 100 100 97 IFC258

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 70 5 f high-grade st. steel 10...36 IP67 / IP68 100 100 44 IGC248

M30 / L = 70 10 f high-grade st. steel 10...36 IP67 / IP68 50 100 98 IIC224


Full metal sensors for oils and coolants with correction factor K = 0

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 70 3 f brass 10...30 IP68 25 200 3 IFC211

M12 / L = 60 2.5 f stainless steel 10...36 IP68 100 100 97 IFC263


M12 / L = 60 2.5 f stainless steel 10...36 IP68 100 100 97 IFC264


M18 / L = 70 4.5 f stainless steel 10...36 IP68 100 100 93 IGC249


M18 / L = 70 4.5 f stainless steel 10...36 IP68 100 100 93 IGC250


M18 / L = 70 5 f brass 10...30 IP68 25 200 9 IGC211

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 70 5 f brass 10...30 IP68 25 200 9 IGC215


Sensors for oils and coolants with correction factor K = 1

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 65 5 f high-grade st. steel 10...30 IP68 > 2000 200 109 IGC232

M30 / L = 65 10 f high-grade st. steel 10...30 IP68 1000 200 110 IIC218

M30 / L = 65 22 nf high-grade st. steel 10...30 IP68 1000 200 111 IIC219


Sensors for oils and coolants with ceramic sensing face

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 45 4 f brass 10...36 IP68 700 100 1 IFC206

M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7,8

M12 / L = 70 4 f brass 10...30 IP68 500 100 3 IFC210

M18 / L = 70 8 f brass 10...30 IP68 400 100 9 IGC210


Inductive sensors


Sensors for oils and coolants, threaded housings

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M8 / L = 42 2 f brass 10...55 IP67 1000 100 112 IE9203

Cable with connector 0.8 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8

M8 / L = 42 2 f brass 10...55 IP67 1000 100 113 IE9902

M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8

M8 / L = 69 1 f brass 5...36 IP65 2000 200 34 IE9940


M12 / L = 54 2 f brass 10...55 IP67 800 100 114 IF9222


M12 / L = 54 2 f brass 10...55 IP67 800 100 115 IF9920


M18 / L = 54 5 f brass 10...55 IP67 700 400 116 IG5682


M12 / L = 60 2 f brass 10...55 IP67 800 100 117 IF9924


M18 / L = 58 5 f brass 10...55 IP67 700 400 118 IG9984


M18 / L = 46 5 f brass 10...36 IP68 400 200 7 IGC226

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 65 5 f brass 10...55 IP67 700 400 119 IG9983


Sensors for oils and coolants, rectangular housings

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


26 x 26 x 26 10 f polyamide 10...36 IP67 250 100 120 IO5017





Cable with connector 0.8 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 34 · Connector group —




M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 35 · Connector group —



Inductive sensors


Full-metal sensors with non-stick coating against weld spatter

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M8 / L = 60 2 fstainless steel 316L /

1.440410...36 IP67 / IP68 100 100 108 IER200

M12 / L = 60 4 f high-grade st. steel 10...36 IP67 2 100 97 IFR200

M18 / L = 70 6 f high-grade st. steel 10...36 IP67 2 100 44 IGR200

M30 / L = 70 12 f high-grade st. steel 10...36 IP67 2 100 98 IIR200


M8 / L = 45 2 f high-grade st. steel 10...36 IP67 150 100 124 IER206










Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.














Electromagnetic field immune sensors with correction factor K = 1

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 65 3 f brass 10...30 IP67 4000 200 132 IFW200


M12 / L = 65 8 nf brass 10...30 IP67 4000 200 133 IFW201

Inductive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 65 5 f brass 10...30 IP67 2000 200 109 IGW200

M18 / L = 65 12 nf brass 10...30 IP67 2000 200 134 IGW201

M30 / L = 65 10 f brass 10...30 IP67 1000 200 110 IIW200

M30 / L = 65 22 nf brass 10...30 IP67 1000 200 135 IIW201













Inductive sensors


Electromagnetic field immune sensors

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 60 2 f brass 10...36 IP67 1000 250 102 IF5750

M12 / L = 60 4 nf brass 10...36 IP67 1000 250 136 IF5751

M18 / L = 60 5 f brass 10...36 IP67 700 250 137 IG5647

M18 / L = 60 5 f brass 10...36 IP67 700 250 137 IG5667

M30 / L = 60 10 f brass 10...36 IP67 250 250 138 II5503


92 x 80 x 40 50 f PPE 10...36 IP67 70 250 78 ID5059


Sensors for mobile applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 79 4 f stainless steel 10...36 IP67 / IP69K 400 100 139 IFM207

M12 / L = 79 7 nf stainless steel 10...36 IP67 / IP69K 300 100 140 IFM208


Inductive sensors


Fail-safe inductive sensors for series connection to IEC 62061 SILcl 3 and ISO 13849-1 PL e

Type Length

[mm]

Enablezone[mm]

Housingmaterial

UbDC[V]

Protection Response timeon removal /

approach [ms]

Draw-ingno.

Orderno.

M12 connector · Wiring diagram no. 36 · Connector group —

91 3...6 nf high-grade st. steel / PBT 19.2...30 IP 68 / IP 69K < 20 / < 200 141 GG505S

91 1...4 f MS / PBT 19.2...30 IP 68 / IP 69K < 20 / < 200 142 GG507S

80 6...12 nf V4A / PEEK 19.2...30 IP 68 / IP 69K < 20 / < 200 143 GI505S

80 6...12 V4A / PEEK 19.2...30 IP 69 K < 20 / < 200 143 GI506S

66 10...15 f PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 20 / < 200 144 GM504S

66 10...20 nf PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 20 / < 200 144 GM505S


Inductive sensors for safety-related applications, 2 x OSSD, SIL 2, PL d

Type Length

[mm]

Enablezone[mm]

Housingmaterial

UbDC[V]


approach [ms]

Draw-ingno.

Orderno.


70 0.5...4 nf high-grade st. steel / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 145 GF711S

70 1...8 nf high-grade st. steel / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 146 GG711S

70 1...5 f MS / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 147 GG712S

70 1...15 nf high-grade st. steel / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 148 GI711S

Inductive sensors


Type Length

[mm]

Enablezone[mm]

Housingmaterial

UbDC[V]


approach [ms]

Draw-ingno.

Orderno.


70 1...10 f MS / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 149 GI712S


Inductive sensors for safety-related applications, 2 x OSSD, SIL 3, PL e

Type Length

[mm]

Enablezone[mm]

Housingmaterial

UbDC[V]


approach [ms]

Draw-ingno.

Orderno.


80 6...12 nf high-grade st. steel / PBT 19.2...30 IP 68 / IP 69K < 1 / < 1 143 GI701S

66 10...15 nf PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 1 / < 1 144 GM701S

– 4...20 nf PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 1 / < 1 144 GM705S


Safety relays with relay outputs for fail-safe sensors

Type Description Orderno.

Safety relay · Relay outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safesensors/switches and for use as two-hand control · – · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Type IIIC (EN 574)

G1501S

Safety relay · Relay outputs · can be set with and without timer function · Housing for DIN rail mounting · For the connection ofelectronic and mechanical fail-safe sensors/switches and for use as two-hand control · – · Complies with the requirements: · PL e (EN ISO 13849-1) · SIL 3 (IEC 61508) · SILcl 3 (IEC 62061) · Type IIIC (EN 574)

G1502S

Safety relays with solid state outputs for fail-safe sensors


Safety relay · Semi-conductor outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safesensors/switches and for use as two-hand control · – · Complies with the requirements: · SIL 3 (IEC 61508) · SILcl 3 (IEC 62061) ·Type IIIC (EN 574) · PL e (EN ISO 13849-1)

G1503S

Inductive sensors


Sensors with ATEX approval 1D / 2G

Type Dimensions

[mm]

Sensingrange[mm]

Material Unom.at 1 KΩ

[V]

Ub

[V]

Internalcapacit.

[nF]

Internalinductance

[μH]

f

[Hz]

Draw-ingno.

Orderno.

Cable 2 m · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 23

M8 / L = 30 1 f brass 8.2 DC 7.5...30 80 70 2000 150 NE5001

M12 / L = 30 2 f brass 8.2 DC 7.5...30 140 340 1200 151 NF5002

M12 / L = 30 4 nf brass 8.2 DC 7.5...30 140 130 1500 152 NF5004

M18 / L = 33 5 f brass 8.2 DC 7.5...30 145 45 720 153 NG5002

M18 / L = 33 8 nf brass 8.2 DC 7.5...30 155 50 300 154 NG5004

M30 / L = 41 10 f brass 8.2 DC 7.5...30 145 140 450 155 NI5002


Sensors with ATEX approval 1D / 1G / 2G

Type Dimensions

[mm]

Sensingrange[mm]


[V]

Ub

[V]

Internalcapacit.

[nF]

Internalinductance

[μH]

f

[Hz]

Draw-ingno.

Orderno.

M12 connector · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 24 · Connector group —

40 x 40 x 66 35 nf PPE 8.2 DC 7.5...30 220 710 100 90 NM501A


Inductive sensors


Sensors with ATEX approval 2D

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


105 x 80 x 40 60 nf PPE 10...36 IP65 4 40 156 ID501A



Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 46 8 f high-grade st. steel 10...36 IP67 500 100 7 IGT20A


Switching amplifiers with ATEX approval


Amplifier · NV1121/230VAC/RL/1D/1G · ATEX approval · Group II, category (1) G D · 1-channel · Relay output · Programmableoutput function · Short-circuit and wire monitoring

N0031A

Accessories for sensors with smooth sleeve


Mounting clip · Ø 18 mm · for smooth body switches - Ø 18 mm · Form V · Housing materials: V4A E11531

Mounting clamp · Ø 20 mm · Housing materials: Mounting clamp: PBT / socket screw: steel galvanised E10016

Mounting clamp · Ø 34 mm · Housing materials: PBT E10017

Inductive sensors


Accessories for threaded M8 housings


Mounting clamp · Ø 8 mm · with end stop · for type M8 · Housing materials: PC E11521

Mounting sleeve · M12 x 1 - Ø 8 mm · 32 mm · with end stop · for type M8 · Housing materials: brass special coating E10848

Limit plungers · for types M8 x 1 · with Sn = 1 mm f, 2 mm f and 3 mm f · Housing materials: Limit plungers: free cutting steel /plunger: C45K hardened on front / nut: brass nickel-plated

E10154



Angle bracket · for type M12 · Housing materials: stainless steel E10735

Mounting clip · Form O · for type M12 · Housing materials: stainless steel E11533



Mounting sleeve · M16 x 1 - Ø 12 mm · 45 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E10741

Mounting sleeve · M16 x 1 - Ø 12 mm · 34 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E10806

Mounting sleeve · M16 x 1 - Ø 12 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E11114

Inductive sensors





Mounting clip · Form O · for type M18 · Housing materials: stainless steel E11534

Mounting clamp · Ø 20 mm - Ø 18 mm · with reducing bush · for type M18 · Housing materials: PBT E10076


Mounting sleeve · M24 x 1.5 - Ø 18 mm · 58 mm · with end stop · for type M18 · Housing materials: brass nickel-plated E10742


Mounting sleeve · M22 x 1 - Ø 18 mm · with end stop · for type M18 · Housing materials: brass white bronze coated E11115








Inductive sensors


Accessories for rectangular housings


Mounting bracket · with integrated snap-on rail · for type IDC · Housing materials: stainless steel E10730

System components


Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel

E20718


E20719

Mounting set · Ø 12.2 mm · Clamp mounting · aluminium profile · for type OF, IF · Housing materials: fixture: stainless steel 316Ti /1.4571 / clamp: diecast zinc / Cube: diecast zinc

E20864

Mounting set · Ø 12.2 mm · Clamp mounting · aluminium profile · for type OF, IF · Housing materials: fixture: stainless steel 316Ti /1.4571 / clamp: diecast zinc / Cube: diecast zinc

E20865

Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc

E20866


E20867

Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: stainless steel

E20874

Core colours

BN brown

BU blue

BK black

WH white

Wiring diagrams

1

L+

L

1

4

3

2

L+

L

1

2

3

3

L+

L

1

4

4

3

4

L1

N

L+

L

Inductive sensors

73

Wiring diagrams

5

BN

BK

BU

L+

L

6

L+

L

1

3

2

7

/L+

L

13

/2 4

8

4

L

L+1

2

32:4:

9

L

L+

4

2

1

32:4:

10

L+

L

1

4

3

11

L+

L

1

4

3

12

BN

BU

L1

N

13

BN

BU

L+L1

LN

14

/1 3

/2 4

L1L+

LN

15

BN

BU

L+L1

LN

16

1

3

2

L1L+

LN

17

L+

L

1

4

3

18

BK

BK

L+

L

19

3

4 L

LL+

L+

20

L+

L

4

3

21

L

BN

BU

L+

22

BN

BU

L+

L

23

+BN

BU

24

L+

L2

1

1

52

1: connection to NAMUR-amplifier, 2: Potential equalisation plug housing

25

L+

L

1

4

L+

L

1

4

3

26

L+

L

1

4NPN

L+

L

1

4

3PNP

Inductive sensors


Wiring diagrams

27

L+

L1

4L+

L

1

4

28

WH

BK

L+

L L

BK

WH

L+

29

L+

L

BN

BK

BU

L+

L

BN

BK

30

L+

L

/1 3

/2 4

L+

L/1 3

/2 4

31

2

4

3

1

5

L+

L

2

4

3

1

5

L+

L

32

2

4

3

1

5

AC;DC NPN

L+N

LL1

2

4

3

1

5

AC;DC NPN

L+N

LL1

2

4

3

1

5

DC PNP

L+

L

2

4

3

1

5

DC PNP

L+

L

33

BN

BU

L+

L

NPNBN

BU

L+

L

PNP

34

L+

L1

2L+

L

1

2

35

L+

L1

4L+

L

1

4

36

(BK)

3

1

4

2

L+

L

(BN)

A

TE

(BU)

(WH)+24 V

OUT

GND

IN

1

1: Safety-related logic unit

Inductive sensors

75

Wiring diagrams

37

(BK)

3

1

4

2

L+

L

(BN)

A2

A1

(BU)

(WH)+24 V

IN1

GND

IN2

1

1: Control monitor or PLC

38

5

4

3

2

1 L+

L

1

5

4

3

2

1 L+

L

1

1: fuse

Scale drawings / drawing no. – CAD download: www.ifm.com

1

453432

M12

x1

174

M12

x1

LED 4 x 90°

2

32

M12

x1

17

4

5

M12

x1

3950

LED 4 x 90°

3

LED 4 x 90°

5970

50

M12

x1

174

M12

x1

4

45

M12

x1

174

5

M12

x1

5970

LED 4 x 90°

5

3530

M12

x1

174

46

LED 4 x 90°

38

M8

x1

6

M12

x1

11

10

4

17

2 LED 5 35

7

M18

x1

M12

x1

3033

4635

424LED 4 x 90°

8M

18x1

M12

x1

2538

5140

424

10

LED 4 x 90°

9

M18

x1

M12

x1

49

56,5

70

59

424LED 4 x 90°

10

M18

x1

M12

x1

40

58

70

LED 4 x 90°

60

10

4

24

Inductive sensors



11

M18

x1

M12

x1

4956

7059

424LED 4 x 90°

12

60

M18

x1

4

M12

x1

4253

72

8

61

LED 24LED 4 x 90°

13

M18

x1

LED

M12

x1

424

3653

14

M30

x1,5

44237

26

528 36

1: 2 LEDs

15

39

33

M30

x1,5

37

50

M12

x1

LED 4 x 90° 5 36

16

59

53

M30

x1,5

57

70

M12

x1

LED 4 x 90° 536

17

8LED

20

2530

M5

x0,

5

2,7

18

15,5

LED

2427

M5

x0,

5

7

2

19

LED 4 x 90° 8

22

45

M5

x0,

5

2,7

M8

x1

36

20

2735

M8

x1LED 4

13

21

3942

50

LED

M8

x1

413

22

20

LED

M8

x1

4

13

23

27

M8

x1

4LED

13

25

Inductive sensors

77


24

35

LED

M8

x1

413

2

25

27

LED

M8

x1

413

82

26

38,542,5

M8

x1

4

13

M8

x1

LED 4 x 90°

50

27

18,5

30

M8

x1

4

13

M8

x1

22,5

LED 4 x 90°

28

4

13

28,5

40

M8

x1

LED 4 x 90°

M8

x1

32,5

29

23

40

M8

x1

LED 4 x 90°

4

13

M8

x1

832,5

30

2734

M8

x1

LED 4

13

M12

x1

53

31

M8

x1

4

13

M12

x1

6250

40

LED 4 x 90°

32

M8

x1

4

13

M12

x1

624738 2

LED 4 x 90°

33

M8

x1

4

13

M12

x1

6247

40

LED 4 x 90°

34

3842

M8

x1

LED

4

13

69

M12

x1

35

3524

M12

x1

4LED

17

9

18

36

9

18 7160

50

M12

x1

LED 174

37

4

3524

M12

x1

4LED

17

9

18

Inductive sensors



389

18 716046

M12

x1

LED 174

4

39

M12

x1

7460

51

M12

x1

LED 174

83

40

83

6047

M12

x1

LED 174

4

M12

x1

74

41

3827

M18

x1

4LED 24

9

18

42

24LED

801869

58

M18

x1

4

9

43

24LED

80186950

M18

x1

4

9

8

44

5957

50

M18

x1

4

M12

x1

70

24LED 4 x 90°

45

24

675542

M18

x1

4LED

8

M12

x1

76

46

79

24

50

M18

x1

4

110

20

30

81LED

47

36

8167

59

5

M30

x1,5

9

18

LED

48

36

685350

5LED

M30

x1,5

M12

x1

78

49

15

36

6853

35

5LED

M30

x1,5

M12

x1

78

50

4058

M12

x1

M30

x1,5

LED 5

36

Inductive sensors

79


51

M18

x1

30 10

M12

x1

47

60

LED 4 x 90°

49

424

52

LED 4 x 90°

59

38

M30

x1,5

5

57

70

36

M12

x1

15

53

LED

3020 4

54

LED

2715,4 4

55

36

LED 4 x 90°

M8

x1

4

45

22

56

34

LED 4 x 90°

M8

x1

4

41

20

57

40

M8

x1

6,5

49

LED 4 x 90°

58

3022,5

LED 4 x 90°

M8

x1 6,5

59

9

18

20

7766

55

LED

60

62

9263

30

LED

20

61

9

18

LED

34

8272

60

62

9870LED

34

38

60

63

5

145,5

3,5M1,6

25

2,814

LED

1

1: sensing face

Inductive sensors



64

20 10

5

M3

8

LED

40

520

IL 5003

4

IL 50021

1: sensing face

65

LED20 10

5

M3

8

40

520

M8

x1

LED

52

IL 5005IL 50041

1: sensing face

66

10,2

27,8

LED

5,6

165,1

22,2

2,75

3,1

3,5

2,83,1

LED

10,4

67

10,2

27,8

LED

5,6

M8x1

36,8

16

22,2

2,75

3,1

3,5

2,83,1

10,4

M8x1

LED

68

40

6

12

LED

4

2613

32

3,2 4

5

LED

3,2

18

1610

1

1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact withcounterpart.

69

4

213

32

3,2 45

LED

3,2

18

M8x1

9406

12

LED

1610

1

1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact withcounterpart.

70

LED10

4

20

12

4

60

36

16

3,2 28

3,2159

24

4,2

71

104

20

60

36

16

3,2 28

3,2159

24

4,2

LED

13

4

72

4LED

10

20

12

4

60

36

163,2

28

3,2158

24

4,2

M8

x1

73

Inductive sensors

81


73

40

66

40

54

M12

x130

30 2

2

1

46

46

5,5

5,5

29,5

1: LED yellow, 2: LED green

74

40

66

40

54

M12

x130

30 2

5,5

5,5

1

2

46

46

29,5

1: LED yellow, 2: LED green

75

40

10,4

45,6

LED

32

5,3

30

61,5

77

5,1

121101

LED

27

76

40

13

7,35,3

46

30

60

LED58

5,3

40118

LED

77

90

30

45

7,545

9,35,5

60

16

LEDpot.

4012

8

16

78

92

8040

7,565

65

5,59,3

M12

x1

112

40

LED171

20

1: mounting on DIN rail

79

105

80

40

7,565

65

5,59,3 40

12

27

18

LED

pot.

16

Inductive sensors



80

105

80

40

7,565

65

5,59,3

M12

x1

123

4012

2718

LED

pot.

16

81

120

45

8060

10100

69,5

4021

3015

pot.

LED

82

11

1015

42,5

60

5

M12 x1

2635

4,5

10,1

4,5

4

1510

68

20

1: Sensitivity, 2: Output function, 3: Pulse stretching time

83

11

1015

42,5

60

5

M12 x1

2635

4,5

15,1

4,5

4

1510

68

20


84

11

1015

42,5

60

5

M12 x1

2635

4,5

20,1

4,5

4

1510

68

20


85

11

1015

42,5

60

5

M12 x1

2635

4,5

25,1

4,5

4

1510

68

20


86

M8x1

1720

709

12

1345

3 5,5

1: sensing face, 2: LED operating status, 3: LED switching status

87

1720

70

M12

x1

12

1345

3 5,5

1: sensing face, 2: LED operating status

Inductive sensors

83


88

8167

5

1544

36

M30

x1,5

9

18

LED

89

40

LED

4661

30 20

5,4

105,

4 6

8,5

33

1/2"

20U

NF

2A

LS10

0

4066

17

34

90

40

M12

x1

4066

17

34

LED

4661

30 20

5,4

105,

4 6

16

33

91

32

M12

x1

17

4

5

M12

x1

3950

LED 4 x 90°

92

M18

x1

M12

x1

2538

5140

424

10

LED 4 x 90°

93

M18

x1

M12

x1

5057

7059

424LED 4 x 90°

94

M18

x1

M12

x1

3956

70

LED 4 x 90°

59

10

424

95

57

39,5

29

33

LED4 x 90°

M18

x1

424

5

96

5

64

LED 4 x 90°

81

5750

10

18

37

1

1: locating groove

97

4940

M12

x1

174

M12

x1

LED 4 x 90°

60

98

58

50

M30

x1,5

5

57

70

36

M12

x1

LED 4 x 90°

Inductive sensors



99

4425

M12

x1

4

17

LED

100

M18

x1

M12

x1

3233

45

LED 4 x 90°

8

424

101

M12

x1

5039

25

LED 4 x 90° 13

4

M8

x1

102

4840

M12

x1

174

M12

x1

5160

LED 4 x 90°

103

4935

M12

x1

174

M12

x1

LED 4 x 90°

60

5

104

60

50

M30

x1,5

M12

x1

5

53

7261

LED 36LED 4 x 90°

105

39

19

M30

x1,5

37

50

M12

x1

LED 4 x 90° 5

15

36

106

35 1560

M30

x1,5

M12

x1

5

7261

36LED 4 x 90°

107

3042,5

M8

x1

4

13

M8

x1

LED 4 x 90°

50

108

M8

x1

4

13

M12

x1

6049

33

LED 4 x 90°

109

M18

x1

4LED 4 x 90° 24

M12

x1

5254

65

45

110

53

49

M30

x1,5

5

52

65

M12

x1

LED 4 x 90° 36

Inductive sensors

85


111

54

32

M30

x1,5

5

52

65M

12x1

15

36LED 4 x 90°

112

13

35

M8

x1

4

LED 42

113

42

M12

x1

13

35

M8

x1

4

LED 42

114

LED

40

M12

x1

417

54

115

42

M12

x1

LED

40

M12

x1

417

54

116

24

5452

M18

x1

4LED

117

6041

M12

x1

4

17

LED

118

42

M12

x1

5852

M18

x1

4

24

LED

119

55

M18

x1

4LED 24M

12x1

4044

65

120

343

254

6

26 26LED

121

343

25

4

6

26

M12

x1

42,5

26

LED

Inductive sensors



122

40 40

54

30

46

5,5

30

46

LED

5,5

M12

x1

29,5

123

40

66

40

54

M12

x130

30 2

46

46

5,5

5,5

LED

29,5

124

M12

x1

14

≤ 49,3

LED

M8

x1

4535

74

13

125

M12

x1

14

49

M12

x1

4

LED

11 17

4030

126

M12

x1

14

49

LED

17

M18

x1

4

24

4030

127

M12

x1

14

49

40

536

LED

M30

x1,5

30

28

128

LED

M8

x1

4535

74

13

129

M12

x1

4

LED

11 17

4030

130

LED

17

M18

x1

4

24

4030

131

40

536

LED

M30

x1,5

30

28

Inductive sensors

87


132

54

52

M12

x1

4

M12

x1

LED 4 x 90°

65

17

133

5442

M12

x1

M12

x1

LED 4 x 90°

65

10

17

4

134

10

M18

x1

4LED 4 x 90° 24

M12

x1

35

5465

52

135

53

34

M30

x1,5

5

52

65

M12

x1

LED 4 x 90°

15

36

136

36

M12

x1

174

4

M12

x1

4851

60

LED 4 x 90°

137

24

4947

40

M18

x1

4

M12

x1

60

LED 4 x 90°

138

48

40

M30

x1,5

5

46,5

60

M12

x1

36LED 4 x 90°

139

5,4

7962

53

M12

x1

LED 4 x 90° 17

4

140

5,4

796248

LED 4 x 90° 17

4

M12

x1

5

141

M18

x1

55 10

M12

x1

90,5

LED 8 x 45°

79

424

142

65

M12

x1

LED 8 x 45°

90,5

424

M18

x1

143

LED 4 x 90°

69

39

M30

x1,5

5

67

80

36

M12

x1

15

Inductive sensors



144

40

M12

x1

4066

17

34

LED

4661

30 20

5,4

105,

4

6

8,5

33

145

45

M12

x1

174

5

M12

x1

5970

LED

146

35

M12

x1

LED 2 x 180°

70,5

M18

x1

57

424

10

147

45

M12

x1

LED 2 x 180°

70,5

424

M18

x1

57

148

LED 4 x 90°

M30

x1,5

5

45

70

36

M12

x1

15

57

149

LED

M30

x1,5

5

45

70

36

M12

x1

57

150

30

M8

x1

4

13

151

30

M12

x1

4

2

17

152

430

M12

x1

4

2

17

153

33

M18

x1

4

2

24

154

M18

x1

4

2 33

8

24

155

2 41

5

M30

x1,5

36

156

105

80

40

7,565

65

5,59,3

24

40

12

2718

LED

pot.

16

Inductive sensors

89

High operational reliability due to increased noise immunity.

Sensing range adjustable by means of a potentiometer or pushbutton.

Plastic or metal housing for different applications.

Variable: connector, connection cable or connection terminals.

Assortment of tank and sight glassmounting acccessories.

Capacitive sensors

Capacitive sensors are used for the non-contact detection of any objects. In contrastto inductive sensors, which only detect metallic objects, capacitive sensors can alsodetect non-metallic materials. Typical applications are in the wood, paper, glass,plastic, food and chemical industries. In a packaging system, capacitive sensorsmonitor that the contents of a cardboard box is complete, for example, or checkthe presence of non-metallic caps. Another application is to monitor the conveyingof sheets of glass on a roller conveyor.

Operating principle

The capacitance between the active electrode of the sensor and the electrical earthpotential is evaluated. An approaching object influences the electrical alternatingfield between these two “capacitor plates” and, consequently, the capacitance. Thisapplies to metallic and non-metallic objects. By means of the potentiometer or thepushbutton the user can set the sensitivity.

Increased noise immunity

When detecting objects, very small changes in capacitance must be evaluated andconverted into switching signals. This makes high requirements for the electronics.The sensors must be designed so that they are insensitive to fluctuations of theparasitic basic capacitances, as these can amount to a multiple of the change incapacitance to be measured. Moreover, the sensors must be insensitive to electro-magnetic interference which typically occurs in the application area.

ifm electronic has developed future-oriented solutions to meet the high sensorrequirements. A patented circuit concept efficiently prevents the mentionedproblems and ensures reliable functioning for all relevant noise parameters.

Not only metal: Capacitive sensorsdetect almost allmaterials, herefor example a login a saw mill.

Capacitive sensors

90


Sensors for industrial applications, DC 92 - 93

Sensors for industrial applications, AC and AC/DC 93 - 94

Sensors for the detection of conductive media through a wall 94

Sensors with ATEX approval 95


Accessories mounting adapters 95

Accessories mounting components 96

Accessories mounting sets 96 - 97



Capacitive sensors

91

Sensors for industrial applications, DC

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

Cable 2 m · Output function · DC PNP · Wiring diagram no. 1

M18 / L = 84 8 nf PBT 10...36 IP67 50 250 1 KG5043

Cable 2 m · Output function · DC PNP/NPN · Wiring diagram no. 14

M18 / L = 84 8 nf PBT 10...55 IP67 50 400 1 KG5047

M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8

M12 / L = 60 4 f high-grade st. steel 10...36 IP65 50 100 2 KF5001

M12 / L = 61 8 nf high-grade st. steel 10...36 IP65 50 100 3 KF5002

Terminals · Output function · DC PNP · Wiring diagram no. 3

M18 / L = 110 8 nf PBT 10...36 IP65 50 250 4 KG5041


M18 / L = 93.8 8 nf PBT 10...36 IP67 50 250 5 KG5057

Terminals · Output function · DC PNP/NPN · Wiring diagram no. 15

M18 / L = 110 8 nf PBT 10...55 IP65 50 400 4 KG5040


M30 / L = 81 15 nf PBT 10...36 IP65 40 250 6 KI5002


M30 / L = 81 15 nf PBT 10...36 IP65 40 250 6 KI5001

connector (DIN EN 175301-803) · Output function · DC PNP · Wiring diagram no. 6 · Connector group —

M30 / L = 92 15 nf PBT 10...36 IP65 40 250 7 KI5038

Capacitive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M30 / L = 90 8 f high-grade st. steel 10...36 IP65 / IP67 10 100 8 KI5085

M30 / L = 90 15 nf high-grade st. steel 10...36 IP65 / IP67 10 100 9 KI5087


M30 / L = 125 15 nf PBT 10...55 IP65 40 250 10 KI5023


Ø 34 / L = 81 20 nf PBT 10...36 IP65 40 250 11 KB5004


Ø 34 / L = 93 20 nf PBT 10...36 IP65 40 250 12 KB5062


120 x 80 x 30 60 nf modified PPO 10...36 IP65 10 250 13 KD5022


105 x 80 x 40 60 nf modified PPO 10...36 IP65 10 250 14 KD5018


Sensors for industrial applications, AC and AC/DC

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

Cable 2 m · Output function · AC/DC · Wiring diagram no. 8

M30 / L = 81 15 nf PBT 20...250 IP65 25 / 40 250 6 KI0016*


M30 / L = 81 15 nf PBT 20...250 IP65 25 / 40 250 6 KI0020*

Capacitive sensors


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

connector (DIN EN 175301-803) · Output function · AC/DC · Wiring diagram no. 10 · Connector group —

M30 / L = 92 15 nf PBT 20...250 IP65 25 / 40 250 7 KI0040*

Terminals · Output function · AC/DC · Wiring diagram no. 11

M30 / L = 125 15 nf PBT 20...250 IP65 25 / 40 250 10 KI0024*


Ø 34 / L = 81 20 nf PBT 20...250 IP65 25 / 40 250 11 KB0025*


Ø 34 / L = 81 20 nf PBT 20...250 IP65 25 / 40 250 11 KB0029*


120 x 80 x 30 60 nf modified PPO 20...250 IP65 10 250 13 KD0012*

Terminals · Output function · AC/DC · Wiring diagram no. 17

105 x 80 x 40 60 nf modified PPO 20...250 IP65 10 250 14 KD0009*




Sensors for the detection of conductive media through a wall

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

Cable with connector 0.1 m · Output function · 1x open collector DC PNP · Wiring diagram no. 2 · Connector groups 7, 8

20 x 14 x 48 12 nf PBT 10...36 IP65 / IP67 10 100 15 KQ6005


Capacitive sensors


Sensors with ATEX approval

Type Dimensions

[mm]

Sensingrange[mm]


[V]

Ub

[V]

Internalcapacit.

[nF]

Internalinductance

[μH]

f

[Hz]

Draw-ingno.

Orderno.

Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 12

M30 / L = 81 15 nf PBT 8.2 DC 7.5...15 375 1 40 6 KI5030


M30 / L = 151 15 nf PBT 10...30 DC – – – 10 16 KI5065

Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 13

M34 / L = 92 15 nf brass 8.2 DC 7.5...15 375 1 40 17 KX5001



Type Ub

[V]

Power / currentconsumption

[VA] / [mA]

f

[Hz]

Ta

[°C]

Output Protection Draw-ingno.

Orderno.

230 1.0 / 10 -20...60 relay (1 changeover contact) IP20 18 N0031A

Accessories mounting adapters


Mounting adapter · M30 x 1.5 - G 1¼ · Housing materials: PVDF / EPDM E11036

Mounting adapter · M30 x 1.5 - G 1½ · Housing materials: POM / EPDM E11033

Mounting adapter · M30 x 1.5 - G 1½ · Housing materials: PVDF / EPDM E11034

Locknut · G 1¼ · for mounting adapter · Housing materials: PVDF E11030

Capacitive sensors


Accessories mounting components









Mounting adapter for free-standing mounting · for type KQ5, KQ6 · Housing materials: adapter: PBT / inserts: brass / screw: steelgalvanised · Pack quantity: 1

E12153

Mounting adapter · Pipe and tube installation KQ5 / KQ6 with cable ties · Fixing of the types KQ5 and KQ6 to pipes and tubes ·Housing materials: Mounting adapter: PA 12 black

E12163

Accessories mounting sets



E20718


E20719


E20866

Capacitive sensors




E20867

Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: stainless steel

E20874

Core colours

BN brown

BU blue

BK black

WH white

GN/YE green/yellow

Wiring diagrams

1

BN

BK

BU

L+

L

2

L+

L

1

4

3

3

L

L+

/2 4

1

3

4

L+

L

1

4

3

5

BN

BK

BU

L+

L

6

L+

L

1

3

2

7

/L+

L

13

/2 4

8

BN

BU

L+L1

LN

9

BN

BU

L+L1

LN

10

1

2

L1

N

L+

L

11

/1 3

/2 4

L1L+

LN

12

+BN

BU

13

BN

GN/YE

BU+

14

WH

BK

L+

L L

BK

WH

L+

15

L+

L

/1 3

/2 4

L+

L/1 3

/2 4

Capacitive sensors

97

Wiring diagrams

16

2

4

3

1

5

L+

L

2

4

3

1

5

L+

L

17

2

4

3

1

5

AC;DC NPN

L+N

LL1

2

4

3

1

5

AC;DC NPN

L+N

LL1

2

4

3

1

5

DC PNP

L+

L

2

4

3

1

5

DC PNP

L+

L


1

24

58

4

84

M18

x1

pot.LED LEDpot.

2

40,2

38,2

M12

x1

M12

x1

59,8

1 2

1: LED 4 x 90°, 2: with pot.

3

34,6

M12

x1

5

M12

x1

41,661,2

1 2

1: LED 4 x 90°, 2: with pot.

4

80

24

67,250

M18

x1

4

110

20

30

81LED

17

1

1: with pot.

5

1

24

58

4

84

M18

x1

93,8

67,2

M12

x1

2

1: with pot., 2: LED

6

36

8159

5

M30

x1,5

9

18pot.LED

7

LED36

66

5

59

M30

x1,5

92

pot.

82

8

60

M30

x1,5

7790

LED (4 x 90°) 5

M12

x 1

361

1: Programming buttons

Capacitive sensors



9

60

M30

x1,5

7790

LED (4 x 90°) 5

M12

x 1

361

15


10

36

6454

5

M30

x1,5

95125

37

25

88

LED pot.

11

9

18

34

8160 LED pot.

12

34

8160

M12

x1

93

LED pot.

13

120

45

8060

10100

69,5

4021

3015

pot.

LED

14

105

80

40

7,565

65

5,59,3 40

12

27

18

LED

pot.

16

15

3,2

48

3343,7

2

5,5 3

13,4

14

20

121

1: Programming buttons, 2: sensing face

16

36

6454

5

M30

x1,5

95125

37

88

LED POTI

26

151

63

24

17

822040

M34

x1,5

10

541

LEDpot.

Capacitive sensors

99


18

11235

,520

120

LED

1

1: Combicon plug with screw terminals (optional)

Capacitive sensors


Capacitive sensors

101

Detection also through non-magnetisable metals.

Small designs with very long sensing ranges up to 100 mm.

Cylinder and rectangular designs for demanding applications.

Wide temperature range for universal use.

Flush or non-flush installation innon-magnetisable metals.

Magnetic sensors

Magnetic sensors are used for the detection of positions without contact or wearand tear in control technology. They are used where inductive sensors reach theirlimits. The advantage: Compared to inductive sensors magnetic sensors have a considerably higher sensing range and smaller housings.

Since magnetic fields penetrate all non-magnetisable materials, the sensors candetect magnets through walls made of non-ferrous metal, stainless steel,aluminium, plastic or wood.

In gate systems, for example, the magnet sensor only detects the magnet which isto be detected. Any possible influences by aluminium in the environment do notimpact the sensor.

In the food industry the magnetic sensor is often used in connection with pigs (cleaning devices which pass through the inside of pipes). By means of magneticsensors their exact position can be detected from the outside through the wall ofthe stainless steel pipe.

Operating principle

Magnetic sensors from ifm electronic use state-of-the-art GMR (Giant MagnetoResistive Effect) technology. The measuring cell consists of resistors with severalextremely fine, ferromagnetic and non-magnetic layers. Whereas in a conventionalWheatstone bridge circuit two screened and two unscreened GMR resistors arecombined, a large signal proportional to the magnetic field is produced if a mag-netic field is present. As from a defined threshold value an output signal is switchedvia a comparator.

Installation

Magnetic sensors can be mounted flush with all materials (even metals) withoutreduction in the sensing range. Depending on the orientation of the magnetic fieldthe sensor can be damped from the front or from the side.

The sensor switchesas soon as themagnet has reachedthe switch-on point.The direction ofmovement of themagnet is notimportant.

Magnetic sensors

102


Sensors for industrial applications 104

Sensors for hygienic and wet areas 104

Accessories mounting components 105

Accessories mounting sets 105

Accessories damping magnets 105

Wiring diagrams 106

Scale drawings / drawing no. – CAD download: www.ifm.com 106

Magnetic sensors

103

Sensors for industrial applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M8 connector · Output function · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3

M8 / L = 60 60 V4A (316S12) 10...30 IP67 5000 200 1 ME5010

Cable 2 m · Output function · DC NPN · Wiring diagram no. 2

M12 / L = 50 60 stainless steel 10...30 IP67 5000 200 2 MFS202

M12 connector · Output function · DC NPN · Wiring diagram no. 3 · Connector groups 7, 8




M18 / L = 60 70 stainless steel 10...30 IP67 5000 200 4 MGS200

M8 connector · Output function · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3

28 x 10 x 16 60 PBT 10...30 IP67 5000 200 5 MS5010

Sensors for hygienic and wet areas

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 60 70 V4A (316S12) 10...30 IP68 / IP69K 5000 200 4 MGT200

M18 / L = 60 100 V4A (316S12) 10...30 IP68 / IP69K – 200 4 MGT201

Magnetic sensors


Accessories mounting components






Accessories mounting sets



E20718


E20719


E20866


E20867

Accessories damping magnets


Damping magnet · M 4.0 · Housing materials: Barium ferrite E10752

Damping magnet · M 5.0 · Housing materials: Barium ferrite E10753

Magnetic sensors


Core colours

BK black

BN brown

BU blue

Wiring diagrams

1

L+

L

1

4

3

2

L

BN

BK

BU

L+

3

L+

L

1

4

3


1

4552

M8

x1

4

13

M8

x1

LED 4 x 90°

60

2

5029

M12

x1

4LED

17

3

4940

M12

x1

174

M12

x1

LED 4 x 90°

60

4

24

4947

40

M18

x1

4

M12

x1

60

LED 4 x 90°

5

10,2

27,8

LED

5,6

M8x1

36,8

16

22,2

2,75

3,1

3,5

2,83,1

10,4

M8x1

LED

Magnetic sensors


Magnetic sensors

107

Self-clamping fixture for easy adjustment and quick mounting.

Convenient: can be easily inserted into the slot from the top.

Suitable for almost all C and T slots.

Unit versions available with connection cable and M8 / M12 cable plug.

Wide selection of adapter accessories.

Cylinder sensors

Cylinder sensors are used for position detection of pistons in pneumatic cylinders.They are directly mounted onto the cylinder. The ring magnet attached to thepiston is sensed through the housing wall of non-magnetisable material(e.g. aluminium, brass or stainless steel). ifm electronic offers a standard solution fordifferent cylinder types and manufacturers.

Operating principle

ifm electronic‘s cylinder sensors use state-of-the-art GMR and AMR technology: AGMR element is made up of extremely thin magnetic layers, each separated by anonmagnetic layer. Without external field they align in an antiparallel manner whichresults in a defined electrical resistance. If these layers are exposed to a magneticfield, the magnetic layers align in a parallel manner. This results in a large change inresistance that is converted into a switching signal by the internal electronics.

An AMR element consists of thin ferromagnetic stripes. Electrical resistance ishighest without external magnetic fields. The effect of a magnetic field reducesresistance. This change is converted into a switching signal by the internalelectronics. Advantage: This method enables exact measurement of even very smallchanges of the magnetic field where space is extremely limited. This results in asmaller hysteresis and a short travel distance. So, the sensors can be used whereverexact positioning is required (e.g. short-stroke cylinder).

Response sensitivity

The response sensitivity applies equally to either magnetic polarity and withoutexternal field influence. The magnetic flux density in most pneumatic cylinders isbetween 5 and 25 millitesla (mT). ifm electronic’s cylinder sensors are factory set sothat they detect these magnetic fields safely.

Travel distance

The travel distance describes the section which is covered by the magnet in thesensing zone. It depends on the strength of the magnet. The short response timesof the sensors allow very high travel speeds.

Position sensing:Cylinder sensorsmonitor the positionof the piston in apneumatic cylinder.

Cylinder sensors

108


T-slot sensors for industrial applications 110

T-slot reed sensors for industrial applications, 2-wire 110 - 111

T-slot sensors for hygienic and wet ares 111

Non flush C-slot sensors for industrial applications 111

Flush C-slot sensors for industrial applications 112

Fixing straps for clean line cylinders 112

Adapters for tie rod and integrated profile 112 - 113

Adapters for trapezoidal slot cylinders 113

Various adapters and memorisation blocks 113

Wiring diagrams 113


Cylinder sensors

109

T-slot sensors for industrial applications

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.


25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 1 MK5100




Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 1, 2, 3








T-slot reed sensors for industrial applications, 2-wire

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.

Cable 2 m · Output function · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 4

30.5 x 5 x 6.5 PA (polyamide) 5...120 1000 IP67 100 -25...70 5 MR0100*

Cylinder sensors


Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.

Cable with connector 0.3 m · Output function · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 5 · Connector groups 1, 3


Cable with connector 0.3 m · Output function · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 5 · Connector group -



Miniature fuse to IEC60127-2 sheet 1, ≤ 0,175 A (fast acting). Recommendation: check the unit for reliable function after ashort circuit.

T-slot sensors for hygienic and wet ares

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.


25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 / IP69K 100 -25...85 8 MK5111

Non flush C-slot sensors for industrial applications

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.


17.5 x 2.8 x 7.7 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 9 MK5301




Cylinder sensors


Flush C-slot sensors for industrial applications

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.


25.8 x 2.8 x 5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 12 MK5312






Fixing straps for clean line cylinders


Fixing strap for clean-line cylinders · Piston diameter · Ø 8...12 mm · Piston diameter 8...12 mm · for type MKT · Housing materials:adapter: PA / Fixing strap: stainless steel

E11816

Fixing strap for clean-line cylinders · Piston diameter · Ø 25...32 mm · Piston diameter 25...32 mm · for type MKT · Housingmaterials: adapter: PA / Fixing strap: stainless steel

E11818

Adapters for tie rod and integrated profile


Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 5...11 mm · Housingmaterials: aluminium / screw: stainless steel

E11797


E11799


E11801

Cylinder sensors



Adapter for tie rod cylinders (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · Clamping range 3...5 mm · Housing materials: aluminium / screw: stainless steel

E11913

Adapter for tie rod cylinders (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · Clamping range 5...7 mm · Housing materials: aluminium / screw: stainless steel

E11912

Adapters for trapezoidal slot cylinders


Adapter for trapezoidal slot cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: aluminium alloy / set screw:stainless steel

E11796

Various adapters and memorisation blocks


Adapter for SMC cylinders ECDQ2 series (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · T-slot rail,flat · Housing materials: aluminium / screw: stainless steel

E11890

Adapter for SMC cylinder CP95 · for types MKT (T-slot cylinder sensors) · Housing materials: stainless steel E11872

Core colours

BK black

BN brown

BU blue

Wiring diagrams

1

BN

BK

BU

L+

L

2

L+

L

1

4

3

3

L+

L

1

4

3

4

N

L1BN

BU

L+

L

5

N

L11

4

L+

L

Cylinder sensors

113


1

5

2

6,2

5,7

25,3

5,1

6,5

LED

1: Fastening clamp, 2: sensing face

2

L

M8

x1

37

5

2

6,2

5,7

25,3

5,1

6,5

LED


3

L

5

2

6,2

5,7

25,3

5,1

6,5

LED

M8

x1

41,5


4

L

5

2

6,2

5,7

25,3

5,1

6,5

LED

M12

x1

55


5

5

13

5,7

30,5

5,7

6,5

LED

2


6

5

13

5,7

30,5

5,7

6,5

LED

2L

M8

x1

37


7

5

13

5,7

30,5

5,7

6,5

LED

2L

M12

x1

55


8

L

5

2

6,2

5,7

25,3

5,1

6,5

LED

M12

x1

55


Cylinder sensors



9

M8

x1

L

37

17,5

7,7

LED

2,84,8

1 2

4,2


10

L

M8

x1

41,5

17,5

7,7

LED

2,84,8

1 2

4,2


11

L

M12

x1

55

17,5

7,7

LED

2,84,8

1 2

4,2


12

LED

2,84,8

1

25,8

5

6,5

2


13

M8

x1

L

37LED

2,84,8

1

25,8

5

6,5

2


14

LM

8x1

41,5LED

2,84,8

1

25,8

5

6,5

2


15

L

M12

x1

LED

2,84,8

1

25,8

5

6,5

2

40


Cylinder sensors

115

Dual inductive feedback sensors forvalves and actuators.

Straightforward fit to standard actuatorsbased on VDI / VDE 3845.

AS-i dual sensor for quick and safe installation due to “plug & play”.

Compact, weatherproof andlow maintenance.

Also available as complete set includingall the accessories for a valve.

Valve sensors

In industrial processes where liquids, air or gases are used valves are needed fordosing and control. There is a wide variety of valve types; butterfly or ball valvesbeing the most common quarter-turn types.

These valves are seldom operated manually. Pneumatic valve actuators are normallyused for mechanical positioning. The valve position must be monitored electronical-ly. On the one hand to provide a feedback to the controller when a certain position(e.g. “open” or “closed”) is reached. On the other hand it is necessary to monitorthe valves centrally.

Mechanical switches are still often used for position feedback on the actuator shaft.For other solutions several inductive sensors are used together with a switch targetfor position detection. Disadvantage: Mounting is mechanically complex. Wherethere are temperature fluctuations condensing humidity leads to corrosion and thusmalfunction.

Operating principle

An innovative design eliminates the disadvantages of these conventional solutions.In 1992 ifm electronic developed a standard which is now used by many leadingactuator manufacturers. A round switch target, known as a “puck”, with two metalscrews offset by 90° is mounted on the actuator shaft. The screws are located at adifferent height. A compact dual inductive sensor (type IND) with two integral sen-sors detects the upper or lower metal screw depending on the valve position andthus the two switch positions.

Advantages

Due to the simple construction the system operates safely with no wear at all. It isvirtually resistant to external influence and meets the protection rating IP 67. Undercertain conditions the unit can even be self-cleaning. Compared to conventionalsolutions the sensor weight is low. The sensors are also resistant to mechanicalstress such as vibration and shock.

Feedback: Monitoringof pneumatic and

manual valves mustbe possible.

Valve sensors

116


Sensors for industrial applications 118

Sensors with ATEX approval 1G/2G and 1D 118

Switching cams for sensors with quarter-turn actuators 118 - 119

Wiring diagrams 119


Valve sensors

117

Sensors for industrial applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function · DC PNP/NPN · Wiring diagram no. 4 · Connector groups 7, 8

40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 1 IN5224


40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 1 IN5225

M18 connector · Output function · AC/DC · Wiring diagram no. 2 · Connector group 13

40 x 26 x 40 4 nf PBT 20...250 IP67 25 / 50 350 / 100 2 IN0108*

Rd 24 x 1/8 connector 6 pins · Output function · DC PNP · Connector group 19

40 x 26 x 60 4 nf PBT 10...36 IP67 1300 250 3 IN5334




Sensors with ATEX approval 1G/2G and 1D

Type Dimensions

[mm]

Sensingrange[mm]


[V]

Ub

[V]

Internalcapacit.

[nF]

Internalinductance

[μH]

f

[Hz]

Draw-ingno.

Orderno.

M18 connector · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 3 · Connector group 13

40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 130 1800 4 NN5013


Switching cams for sensors with quarter-turn actuators


Target puck · Ø 53 mm · 3 possible switching flag positions · Housing materials: Target puck: PA 6 black / screws: V2A E17320

Valve sensors



Target puck · Ø 65 mm · Housing materials: Target puck: PA 6 / screws: V2A E17327

Target puck · Ø 102 · Housing materials: Target puck: PA 6 / screws: V2A E17328

Core colours

BK black

BN brown

BU blue

WH white

Wiring diagrams

1

L

L+

3 BU

2 WH

4 BK

1 BN

2:4: A1

A2

2

L+L1

LNL+L1

LN

1

2

4

33:4: A1

A2

3

Out 2

4 BK

2 BU

3 WH

1 BNL+ 1

L+ 2

Out 1

1

1: connection to NAMUR-amplifier

4

L

L+

L+

L

2:1: A1

A2

2 WH

1 BN

4 BK

3 BUL

L+

L+

L

3:4: A1

A2

2 WH

1 BN

4 BK

3 BU

NPNPNP


1

40

2613

M12

x1

8,526

4,5

5,5

30

40

9

LED

A1

A2 6,5

LED

2

40

26

13

9

LED

A1

A2 6,5

LED

8,540

4,5

5,5

30M18

x1

67

3

M12

x1

4055

60

Rd24x1 8

78

30 2635

1

1: field connection

Valve sensors

119


440

2613

9

LED

A1

A2 6,5

LED

8,526

4,55,

5

30

49M

18x1

Valve sensors


Valve sensors

121

Photoelectric sensors

122


123

Infrared / red lightsensors

System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com

124 - 125126 - 138138 - 139139 - 143

Laser sensors


144 - 145146 - 151

151151 - 154

Distance detection


156 - 157158 - 159

159159

Fibre optics


160 - 161162 - 167167 - 168168 - 172

For specific systems


174 - 175176 - 179

179179 - 181

Safety light curtains / light grids


182 - 183184 - 185

185185

Visible red light for easy adjustment.

Versions for use in hygienic and wet areas.

LED display to check operation,switching status and function.

Quick set-up due to easy teaching.

Extensive range of system componentsfor easy and safe mounting.


Automation technology can no longer be imagined without photoelectric sensors as“artificial eyes”. They are used where safe and non-contact detection of the exactposition of objects is required. The material of the objects to be detected is of noimportance. Compared to inductive sensors photoelectric sensors have a muchhigher sensing zone.

Through-beam sensors

A through-beam sensor is distinguished by a long range. The system consists of twoseparate components: a transmitter and a receiver. The light only travels one way(from the transmitter to the receiver). Adverse effects in the applications, such asdust in the air, dirt on the lenses, steam or mist do not immediately interfere withthe system (high excess gain).

Retro-reflective sensors

For a retro-reflective sensor the transmitter and receiver are incorporated into onehousing. By means of a reflector the transmitted light is returned to the receiver.

Diffuse reflection sensors

A diffuse reflection sensor is used for the direct detection of objects. Transmitterand receiver are incorporated into one housing. The transmitter emits light whichis reflected by the object to be detected and seen by the receiver. This systemevaluates the reflected light of an object.

Therefore additional components (e.g. reflectors for retro-reflective sensors) are notnecessary to operate a diffuse reflection sensor.

Fixing options

ifm electronic offers a complete component system of easy-to-use mounting setsthat make installation easier for you. The solutions consist of a clamp which isfastened with only one screw, keeps the sensors safely in place and at the sametime guarantees free movement in all axes.

The reflector reflectsthe light beam: For aretro-reflective sensortransmitter and re-ceiver are integratedinto one housing.

Artificial eyes: Photo-electric sensors are

used to detect posi-tions in automation

technology.


124


Cylindrical OF housing (M12) BasicLine 126

Cylindrical housing OG (M18) BasicLine 126 - 127

Cylindrical housing OG (M18) PerformanceLine 127 - 128

Cylindrical housing OG (M18) BasicLine with lateral sensing face 128

Cylindrical housing OG (M18) WetLine for hygienic and wet areas 129

OG housing (M18), rectangular 129

Rectangular OH housing BasicLine 130

Rectangular housing O7 BasicLine 130 - 131

Rectangular housing OJ PerformanceLine, lateral sensing face 131 - 132

Rectangular housing OJ PerformanceLine, front sensing face 132 - 133

Rectangular housing O5 BasicLine 133

Rectangular housing O5 PerformanceLine 133 - 134

Rectangular housing O4 BasicLine 134

Prismatic reflectors, reflective tape and fixing components 134 - 135

Accessories OF housing 135

Accessories OG housing 135 - 136

Accessories OH housing 136

Accessories OJ housing 136

Accessories O5 housing 136 - 137

Accessories OL housing 137

Accessories O4 housing 137

Accessories for system components 137 - 138




125

Cylindrical OF housing (M12) BasicLine

Type Operating principle Range

[mm]

Typeof light

Spot Ø atmax.range[mm]

OutputH = light-onD = dark-on

Wiringdiagr.

no.

Draw-ingno.

Orderno.

Through-beam sensor · M12 connector · 10...36 DC · metal · IP65 · Connector groups 7, 8

Transmitter 4 m infrared 700 – 1 1 OF5021

Receiver 4 m infrared – H/D PNP 15 1 OF5022

Retro-reflective sensor · Cable 2 m · 10...36 DC · metal · IP67

Polarisation filter 0.2...0.8 m red 70 H/D PNP 16 2 OF5024

Retro-reflective sensor · M12 connector · 10...36 DC · metal · IP65 · Connector groups 7, 8

Polarisation filter 0.2...0.8 m red 70 H/D PNP 15 1 OF5025

Diffuse reflection sensor · M12 connector · 10...36 DC · metal · IP65 · Connector groups 7, 8

Diffuse reflection sensor 1...200 mm infrared 92 H/D PNP 15 1 OF5012

Diffuse reflection sensor 1...400 mm infrared 185 H/D PNP 15 1 OF5027

Cylindrical housing OG (M18) BasicLine


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 7, 8

Transmitter 20 m red 800 – 1 3 OGS200

Receiver 20 m red – D PNP 2 3 OGE200

Receiver 20 m red – H PNP 3 3 OGE201

Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 7, 8

Polarisation filter 0.03...4 m red 160 D PNP 2 3 OGP200




[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.


Polarisation filter 0.03...4 m red 160 H PNP 3 3 OGP201

Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 · Connector groups 7, 8

Diffuse reflection sensor 2...600 mm red 50 H PNP 2 4 OGT200


Background suppression 15...250 mm red 15 H PNP 2 4 OGH200

Diffuse reflection sensor · Cable 2 m · 20...250 AC/DC (47...63 Hz AC) · plastics · IP67

Diffuse reflection sensor 1...600 mm infrared < 169 H AC/DC 4 5 OG0034



Cylindrical housing OG (M18) PerformanceLine


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.



Receiver 25 m red – H/D PNP 2 7 OGE500


Polarisation filter 0.03...5 m red 200 H/D PNP 2 7 OGP500


Background suppression 15...300 mm red 25 H/D PNP 2 7 OGH500




[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.


Background suppression 15...300 mm red 25 H/D NPN 5 7 OGH504


Cylindrical housing OG (M18) BasicLine with lateral sensing face


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.


Transmitter 9 m red < 3000 – 1 8 OG5129

Receiver 9 m red – H PNP 6 8 OG5127

Receiver 9 m red – D PNP 7 8 OG5128


Polarisation filter 3 m red < 96 H PNP 6 8 OG5125

Polarisation filter 3 m red < 96 D PNP 7 8 OG5126


Background suppression 100 mm red < 16 H PNP 6 9 OG5123

Background suppression 200 mm red < 28 H PNP 6 9 OG5124



Cylindrical housing OG (M18) WetLine for hygienic and wet areas


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K · Connector group —



OG housing (M18), rectangular


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Retro-reflective sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 7, 8



Polarisation filter 0.1...4 m red 160 D NPN 9 10 OGP282

Polarisation filter 0.1...4 m red 160 H NPN 10 10 OGP283

Diffuse reflection sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 7, 8

Background suppression 100 mm red 7 H PNP 3 10 OGH280

Background suppression 200 mm red 13 H PNP 3 10 OGH281

Background suppression 15...200 mm red 13 H/D PNP 2 11 OGH580

Background suppression 100 mm red 7 H NPN 10 10 OGH282

Background suppression 200 mm red 13 H NPN 10 10 OGH283




Rectangular OH housing BasicLine


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Retro-reflective sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6

Polarisation filter 0.8 m red 10 D PNP 8 12 OH5011

Diffuse reflection sensor · Cable 2 m · 10...30 DC · plastics · IP67

Background suppression 1...15 mm red 2.5 H PNP 11 13 OH5008


Diffuse reflection sensor 2...50 mm red 3.5 H PNP 11 13 OH5004

Diffuse reflection sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6

Diffuse reflection sensor 2...50 mm red 3.5 H PNP 3 13 OH5005


Rectangular housing O7 BasicLine


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Through-beam sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP65 · Connector group -

Through-beam sensor 0...1.5 m red 90 – 1 14 O7S200

Through-beam sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP65 · Connector groups 1, 2, 3

Through-beam sensor 0...1.5 m red – D PNP 8 15 O7E200

Through-beam sensor 0...1.5 m red – H PNP 3 15 O7E201


Polarisation filter 0.03...1 m red 55 D PNP 8 16 O7P200




[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.


Polarisation filter 0.03...1 m red 55 H PNP 3 16 O7P201

Diffuse reflection sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP65 · Connector groups 1, 2, 3

Background suppression 1...30 mm red 2.5 H PNP 3 17 O7H200

Background suppression 0...50 mm red 2.5 H PNP 3 17 O7H202

Background suppression 0...100 mm red 7 H PNP 3 17 O7H204

Rectangular housing OJ PerformanceLine, lateral sensing face


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6

Transmitter 10 m red 1000 – 1 18 OJ5030

Receiver 10 m red – H/D PNP 12 18 OJ5031

Receiver 10 m red – H/D NPN 13 18 OJ5032


Receiver 10 m – – H/D PNP 12 19 OJ5131

Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6

Polarisation filter 0...2 m red 64 H/D PNP 12 18 OJ5026

Polarisation filter 0...2 m red 64 H/D NPN 13 18 OJ5027





[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Diffuse reflection sensor · Cable with connector 0.15 m · 10...30 DC · plastics · IP67 · Connector groups 7, 8

Background suppression 15...400 mm red < 18 H/D PNP 12 20 OJ5078

Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6

Diffuse reflection sensor 1...600 mm red 60 H/D PNP 12 21 OJ5022

Diffuse reflection sensor 1...600 mm red 60 H/D NPN 13 21 OJ5023

Diffuse reflection sensor 1...1000 mm infrared 150 H/D PNP 12 21 OJ5071



Rectangular housing OJ PerformanceLine, front sensing face


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.







Diffuse reflection sensor · Cable with connector 0.15 m · 10...30 DC · plastics · IP67 · Connector groups 7, 8

Diffuse reflection sensor 1...600 mm red 60 H/D PNP 12 26 OJ5061




[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.


Diffuse reflection sensor 1...1000 mm infrared 150 H/D PNP 12 27 OJ5070





[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8

Transmitter 20 m red 500 – 1 30 O5S200

Receiver 20 m red – D PNP 8 30 O5E200

Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8



Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP65 · Connector groups 7, 8

Background suppression 50...1400 mm red 50 H PNP 3 32 O5H200

Rectangular housing O5 PerformanceLine


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.






[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.


Receiver 25 m red – H/D PNP 2 33 O5E500


Polarisation filter 0.075...10 m red 250 H/D PNP 2 34 O5P500


Background suppression 50...1800 mm red 50 H/D PNP 2 34 O5H500


Background suppression 60...700 mm red 35 H/D PNP 2 34 O5H501



[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.




Prismatic reflectors, reflective tape and fixing components


Prismatic reflector · Ø 20 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20003


Prismatic reflector · Ø 50 mm · round · fixing by screw · for red light and infrared light retro-reflective sensors · Housing materials:plastics

E20956





Prismatic reflector · 45 x 28 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20452



Mounting set · for reflector · Clamp mounting · rod mounting Ø 30 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: aluminium transparent anodised

E21007

Mounting set · for reflector · Ø 35 mm · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel

E20907

Mounting set · for reflector · Ø 80 mm · Clamp mounting · free-standing M12 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc

E20914

Angle bracket · for reflector · 50 x 50 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 E20724

Reflective tape · TS-02 · 50 x 1000 mm · for red light and infrared light retro-reflective sensors · Housing materials: plastics E21015

Accessories OF housing


angle support · 90° · for type OF · Housing materials: housing: ABS / lens: PC E20590

Accessories OG housing






Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: diecastzinc / fixture: steel

E20720

angle support · 90° · for OG5xxx sensors · for type OG · Housing materials: housing: ABS / lens: PC E20723

angle support · 90° · for OG5xxx sensors · for type OGP · Housing materials: housing: ABS / lens: glass E20740

Accessories OH housing


Mounting set · for type OH · Housing materials: ABS E21056

Accessories OJ housing


Basic clip · OJ · Housing materials: diecast zinc E20964

Swivel-mount clip · for type OJ · Housing materials: diecast zinc E20974

Mounting set · OJ · for side lens · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 /clamp: diecast zinc

E20968

Mounting set · OJ · for side lens · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 /clamp: stainless steel

E20969

Mounting set · OJ · for front lens · Clamp mounting · free-standing M8 · Housing materials: clamp: diecast zinc / fixture: stainlesssteel 316Ti / 1.4571

E20966

Accessories O5 housing


Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21087





Angle bracket · O5, O4 · for mounting O5, O4 sensors instead of OL sensors · Dovetail clamp · Housing materials: Dovetail clamp:AlMgSi0.5 / fixture: AlMg3

E21122

Mounting set · Clamp mounting · with protective cover · free-standing M10 · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc

E21084

Mounting set · Clamp mounting · free-standing M10 · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc

E21083

Accessories OL housing


Angle bracket · with protective cover · for type OL · Housing materials: stainless steel E20789

Mounting set · OL · Clamp mounting · rod mounting Ø 40 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp:aluminium transparent anodised

E21012

Mounting set · Clamp mounting · with protective cover · free-standing M12 · for type OL · Housing materials: fixture: stainless steel / clamp: diecast zinc

E20793

Mounting set · Clamp mounting · with protective cover · free-standing M12 · for type OL · Housing materials: clamp: stainless steel / fixture: stainless steel 316Ti / 1.4571

E20877



Angle bracket · O5, O4 · for mounting O5, O4 sensors instead of OL sensors · Dovetail clamp · Housing materials: Dovetail clamp:AlMgSi0.5 / fixture: AlMg3

E21122

Accessories for system components


clamp · Ø 12 mm; M10 · free-standing M10 · Housing materials: clamp: diecast zinc E20716




clamp · Ø 14 mm; M12 · free-standing M12 · Housing materials: clamp: diecast zinc E20796

mounting rod · Ø 10 / M8 · Length: 150 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21081


mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940

Cube · M8 · aluminium profile · Housing materials: diecast zinc E20950


Core colours

BN brown

BU blue

BK black

Wiring diagrams

1

1

3

L+

L

2

L+

L

1

4

3

3

L+

L

1

4

3

4

L1L+

LN

BN

BU

5

L+

L

1

4

3

6

L

L+

4

2 n.c.

1

3

7

L+

4

2 n.c.

1

3L

8

L+

L

1

4

3

9

L+

L

1

4

3

10

L+

L

1

4

3

11

L

BN

BK

BU

L+

12

L+

2

4

1

3 L2: Teach

13

L+

2

4

1

3 L2: Teach

14

L+

L

1

2

3



Wiring diagrams

15

L

L+

3

2

4

1

L

L+

1

2

4

3

2: function check

16

L

BN

BK

BU

L+

L

BU

BK

BN

L+


1

M12

x1

745554

M12

x1

3 LED 17

4

85

pot.

17

2

5540

M12

x1

17

4

52 LED

3

M18

x1

M12

x1

4047

6049

LED 4 x 90°

4

24

4

M18

x1

M12

x1

44

59

7261

LED 4 x 90°

50

1

4

24

1: with pot.

5

766453

M18

x1

4

5,2

78,5

24

LED

1

1: pushbutton

6

M18

x1

M12

x1

3459

7261

LED 4 x 90°

4

24

7

M18

x1

M12

x1

3459

7261

LED 4 x 90°

1

4

24


8

14,5

24

M18 x1

M12 x1

70,159

,334

416

LED 4 x 90°

8,2

9

LED 4 x 90°

13,6

75

M18 x1

M12 x1

646229

419

9,7

27

24


139


10

18

LEDs

38

M18

x1

M12 x1

11,5

35,415,9

24,1

52

243,3

11

3,3

M18

x1

M12 x1

11,5

35,415,9

24,1

52

24

LEDs

1

18

38

1: setting pushbuttons

12

3,9 9,6

12,5

3,2 15

2,9

7,6

6,4

20,6

25,15,

7

LED

13

3,9 9,6

12,5

3,2 15

2,9

7,6

7,2

20,6

25,15

LED

14

9

15

14,1

LED9

26

20,3

2,7

M3

15

9

15

26

20,3

14,1

2,7

M3

LED9

16

9

15

7,6

6,5

LED9

26

20,3

2,7

M3

17

9

15

6,5

7,8

LED9

26

20,3

2,7

M3

1845

11

LED

8,2

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

9

LED

4

1

1: pushbutton




19

1

9

LED

4

11,6

M8x1

1

36,5

11

LED

8,2

43,5

1

24LED

35

8,5

1,8 5,

3 19

3,5

5

1: pushbutton

20

24

3,2

3,1

35

8,83,1

9

LED

4

1

1

48

M12

x1

11

LED

45

9,5

19,5

2

3

1: pushbutton, 2: Receiver, 3: Transmitter

21

11

LED

7,6

16,6

45

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

9

LED

4

1

1: pushbutton

22

11

LED

45

9,5

19,5

1

9

LED

4

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

1: pushbutton

23

24LED

35

8,5

1,8 5,

3 193,5

5

1

9

LED

4

11,6

1

19,5

M8x1

36,5

11

LED

43,5

1

9,5

1: pushbutton

24

1LED

44

11,6

1

36,5

11

LED

43,5

M8x1

19

12412

LED

8,2

35

3,58,5

5

1,85,

3

1: pushbutton


141


25

45

11

LED

1

4

LED

4

1

24

8,2

12

35

8,8

3,2

3,1

3,1

LED

M8x1

1

1: pushbutton

26

45

11

LED

1

24

7,6

16,6

12

35

8,8

3,2

3,1

3,1

LED 1

4

LED

4

1

1: pushbutton

27

45

11

LED

1

3,1

24

7,6

16,6

12

35

8,8

3,2

3,1

LED

M8x1

1

4

LED

4

1

1: pushbutton

28

45

11

LED

1

24

9,5

19,5

12

35

8,8

3,2

3,1

3,1

LED

M8x1

1

LED

44

1

1: pushbutton

29

M8x1

1

36,5

11

LED

43,5

1LED

44

11,6

19124

12

LED

3,58,5

5

1,85,

3

9,5

35

19,5

1: pushbutton

30

LED

15,4

18,2

M12 x1

17

5x9

625 1

56

6,446,8

25

70,3

5

LED

6

1

1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.




31

18,2

M12 x1

1736

,5

LED

15,4

5x9

625 1

56

6,446,8

25

70,3

5

LED6

1


32

1

38

10

1

LED

24,3

15,4

18,2

M12 x1

19,5

37

5x9

625 2

56

6,446,8

25

70,3

5

1

LED

6

2

1: with pot., 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm.

33

1

LED

30,5

24,3

15,4

5x9

625 2

56

6,446,8

25

70,3

5

1

LED

6

2

18,2

M12 x1

17

1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm.

34

18,2

M12 x1

19,5

37

1

LED

30,5

24,3

15,4

5x9

625 2

56

6,446,8

25

70,3

5

1

LED

62

1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm.

35

7,963,8

LED

40

5

8,5

74,4

86,2

1

8,5

40

5x10

1

M12 x1

27

21,1

50,9

LED

29,5



143

Detection of minute objects.

Clearly visible red light for easy settingto the object.

Automatic switch point setting bypressing a pushbutton.

Application sensors available for specialapplication areas.

System components available forfine adjustment.

Laser sensors

Laser sensors are used where detection of small objects or precise positioning isrequired. They are available as through-beam sensors, retro-reflective sensors ordiffuse reflection sensors.

Laser light consists of light waves of identical length which have a defined phaserelation (coherence). This results in an important feature of laser systems, that is thealmost parallel light beam. Result: Due to the small angle of divergence long rangesof up to 60 metres can be achieved. The laser spot which is also clearly visible atdaylight simplifies the alignment of the system. Apart from the advantages somepoints have to be taken into account for the selection of the suitable optical system:Compared to standard sensors the laser sensors have a reduced temperature range(-10...60 °C). Life is limited to approx. 50,000 hours. Basically laser systems aremore expensive than normal red light sensors. In view of the small light spot andthe often high ranges the system is more sensitive to vibrations than standardsensors.

Coherent: Lasersensors emit light ofa defined wave lengthand the same phaseposition.


144


Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1 146

Rectangular OJ housing Laser PerformanceLine, lateral sensing face, laser class 1 146 - 147

Rectangular OJ housing Laser PerformanceLine, front sensing face, laser class 1 147 - 148

Rectangular O1 housing Laser PerformanceLine with background suppression, laser class 2 148

Rectangular housing O5 Laser class 1 148 - 149

Prismatic reflector 149

Accessories OG housing 149 - 150

Accessories OJ housing 150



Accessories for system components 151

Wiring diagrams 151


Laser sensors

145

Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 7, 8





Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 7, 8



Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 7, 8

Background suppression 20...200 mm red 1.2 H/D PNP 2 2 OGH700

Rectangular OJ housing Laser PerformanceLine, lateral sensing face, laser class 1


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.


Transmitter 1 m red < 4 – 1 3 OJ5041







[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.







Polarisation filter 8 m red < 12 H/D PNP 3 3 OJ5036



Background suppression 7...150 mm red 0.8 H/D PNP 3 5 OJ5058

Background suppression 15...200 mm red 2x1 H/D PNP 3 6 OJ5054



Rectangular OJ housing Laser PerformanceLine, front sensing face, laser class 1


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.




Laser sensors



[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.









Rectangular O1 housing Laser PerformanceLine with background suppression, laser class 2


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.

Optical distance sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 7, 8

Background suppression 0.2...10 m 5 6normally open /

closed programmablePNP

2 12 O1D101

Background suppression 0.2...10 m 5 6normally open /

closed programmableNPN

4 12 O1D104

Rectangular housing O5 Laser class 1


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.



Receiver 60 m red – H/D PNP 2 14 O5E700




[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.


Polarisation filter 15 m red 40 H/D PNP 2 15 O5P700


Background suppression 20...200 mm red 1.2 H/D PNP 2 16 O5H700

Prismatic reflector


Prismatic reflector · Ø 10 mm · round · fixing by screw · M3 · for retro-reflective laser sensors · Housing materials: screw: stainlesssteel 316 / 1.4401 / spring washer: stainless steel 316 / 1.4401 / Nut: stainless steel 316 / 1.4401 / front plate: PMMA / base: ABS

E20990

Prismatic reflector · Ø 15 mm · round · fixing by screw · M3 · for retro-reflective laser sensors · Housing materials: screw: stainlesssteel 316 / 1.4401 / spring washer: stainless steel 316 / 1.4401 / Nut: stainless steel 316 / 1.4401 / front plate: PMMA / base: ABS

E20992

Prismatic reflector · 14 x 23 mm · rectangular · for retro-reflective laser sensors · Housing materials: front plate: PMMA / base: ABS E20989

Prismatic reflector · 50 x 10 mm · rectangular · for retro-reflective laser sensors · Housing materials: front plate: PMMA / base: ABS E20988

Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials:plastics

E20722

Accessories OG housing


Fixture for mounting and fine adjustment of laser units · Ø 18.5 mm · Clamp mounting · rod or free-standing depending on theclamp · for type OG · Housing materials: stainless steel 316Ti / 1.4571

E20737

Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: diecastzinc / fixture: steel

E20720

angle support · 90° · for OG5xxx sensors · for type OG · Housing materials: housing: ABS / lens: PC E20723

Laser sensors



angle support · 90° · for OG5xxx sensors · for type OGP · Housing materials: housing: ABS / lens: glass E20740

Accessories OJ housing


Fixture for mounting and fine adjustment of laser units · for front lens · for type OJ · Housing materials: diecast zinc E20975

Fixture for mounting and fine adjustment of laser units · for side lens · for type OJ · Housing materials: diecast zinc E20976

Swivel-mount clip · for type OJ · Housing materials: diecast zinc E20974



Fixture for mounting and fine adjustment of laser units · O1D · Clamp mounting · rod or free-standing depending on the clamp ·Housing materials: fixture: aluminium transparent anodised / plastics: POM / screws: stainless steel

E1D100

Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O1D · Housing materials: fixture: stainless steel / clamp: stainlesssteel / screws: stainless steel / Nut: high-grade stainless steel

E2D101

Mounting set · O1D · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E2D111

Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: PMMA transparent and colourless / sealing: FPM75+/-5 Shore A black / screws: stainless steel

E21133

Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: glass transparent and colourless / sealing: FPM75+/-5 Shore A black / screws: stainless steel

E21171



Fixture for mounting and fine adjustment of laser units · Clamp mounting · rod or free-standing depending on the clamp · for typeO5 · Housing materials: stainless steel 316Ti / 1.4571

E20794









Wiring diagrams

1

1

3

L+

L

2

L+

L

1

4

3

3

L+

2

4

1

3 L2: Teach

4

L+

L

1

4

3


1

M18

x1

M12

x1

3459

7261

LED 4 x 90°

4

24

2

M18

x1

M12

x1

3459

7261

LED 4 x 90°

1

4

24


3

45

11

LED

8,2

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

9

LED

4

1

1: pushbutton

Laser sensors

151


4

1

9

LED

4

11,6

M8x1

1

36,5

11

LED

8,2

43,5

1

24LED

35

8,5

1,8 5,

3 19

3,5

5

1: pushbutton

5

11

LED

45

9,5

15,5

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

9

LED

4

1

1: pushbutton

6

11

LED

45

9,5

19,5

1

9

LED

4

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

1: pushbutton

7

24LED

35

8,5

1,8 5,

3 19

3,5

5

1

9

LED

4

11,6

1

M8x1

36,5

11

LED

43,5

1

9,5

15,5

1: pushbutton

8

24LED

35

8,5

1,8 5,

3 19

3,5

5

1

9

LED

4

11,6

119

,5

M8x1

36,5

11

LED

43,5

1

9,5

1: pushbutton

9

45

11

LED

1

4

LED

4

1

24

8,2

12

35

8,8

3,2

3,1

3,1

LED

M8x1

1

1: pushbutton




10

45

11

LED

1

LED

44

1

24

9,5

15,5

12

35

8,8

3,2

3,1

3,1

LED

M8x1

1

1: pushbutton

11

45

11

LED

1

24

9,5

19,5

12

35

8,8

3,2

3,1

3,1

LED

M8x1

1

LED

44

1

1: pushbutton

12

52

1 2

30

45

2520

4,5

6

4559

42

M12x1

30

1: 4-digit alphanumeric display, 2: Programming buttons

13

LED

15,4

18,2

M12 x1

26

5x9

625 1

56

6,446,8

25

70,3

5

LED

6

1

14

1

LED

30,5

24,3

15,4

5x9

625 2

56

6,446,8

25

70,3

5

1

LED

6

2

18,2

M12 x1

26

15

18,2

M12 x1

26

1

LED

30,5

24,3

15,4

5x9

625 2

56

6,446,8

25

70,3

5

1

LED

6

2

1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.

Laser sensors

153


16

18,2

M12 x1

19,5

37

1

LED

30,5

24,3

15,4

5x9

625 2

56

6,446,8

25

70,3

5

1

LED6

2

1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.



Laser sensors

155

Non-contact distance detection at a high range.

Analogue and switching outputs.

Small light spot and exact background suppression.

Compact and robust metal housing.

Unbeatable price / performance ratio.

Optical distance detection using PMD technology

For collision avoidance, completeness check, level monitoring or as diffuse reflectionsensor with an extraordinary range: The efector pmd distance sensors can be usedin a wide range of applications. Depending on the type, the laser sensors preciselydetermine distances up to 10 m or up to 75 m when a reflector is used. The robustmetal housing ensures operational reliability even under rough operatingconditions.

Operating principle

The efector pmd laser sensors operate to the time-of-flight principle.

The pmd sensor’s receiver element is a „System-on-Chip“ design. Both sensorelement and electronics for signal evaluation are integrated on a single silicon chipcalled a Photonic Mixer Device (PMD). Advantage: This innovative ifm design offershigh performance in a compact, industrially compatible housing – at a fraction ofthe price of conventional systems.

The determined distance is indicated on the 4-digit display and provided via thescalable analogue output (4…20 mA). The user can program two switching outputswhich switch when a certain distance is reached. Up to 50 measurements persecond are possible (adjustable). The light spot diameter is 6 mm at a 10 m dis-tance. This makes the sensor suitable for applications requiring exact backgroundsuppression. An outstanding feature of efector pmd is the extremely compact sizeof only 42 x 45 x 52 mm.

The efector pmdprovides an analoguesignal that is propor-tional to the object-to-sensor distance.

Collision avoidanceon an overhead con-

veyor: efector pmdmonitors distancesbetween products.


156


Rectangular O1 housing for optical distance measurement, laser class 1 158

Rectangular O1 housing for optical distance measurement, laser class 2 158

Rectangular O1 housing for optical level measurement, laser class 2 158

Accessories 158 - 159

Wiring diagrams 159


Distance detection

157

Rectangular O1 housing for optical distance measurement, laser class 1


[mm]

Samplingrate

[Hz]


Ub

[V]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 1 · Connector groups 7, 8

Optical distance sensor 0.3...6 m 1...33 6 18...30 1 1 O1D155

Rectangular O1 housing for optical distance measurement, laser class 2


[mm]

Samplingrate

[Hz]


Ub

[V]

Wiringdiagr.

no.

Draw-ingno.

Orderno.


Optical distance sensor 1...75 m 1...33 150 18...30 1 1 O1D106





Rectangular O1 housing for optical level measurement, laser class 2


[mm]

Samplingrate

[Hz]


Ub

[V]

Wiringdiagr.

no.

Draw-ingno.

Orderno.


Optical level sensor 0.2...10 m 1...33 6 18...30 1 1 O1D300

Accessories


Fixture for mounting and fine adjustment of laser units · O1D · Clamp mounting · rod or free-standing depending on the clamp ·Housing materials: fixture: aluminium transparent anodised / plastics: POM / screws: stainless steel

E1D100




Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O1D · Housing materials: fixture: stainless steel / clamp: stainlesssteel / screws: stainless steel / Nut: high-grade stainless steel

E2D101


Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: PMMA transparent and colourless / sealing: FPM 75+/-5 Shore A black / screws: stainless steel

E21133

Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: glass transparent and colourless / sealing: FPM 75+/-5 Shore A black / screws: stainless steel

E21171

Wiring diagrams

1

L+

L3

4

2

1

Out 1Out 2

4:2:

4

L

L+1

2

3Out 1Out 2

4:2:

2

L

L+

Out 2Out 1

2:4: 3

4

2

1L+

LOut 2Out 1

2:4: 3

2

4

1


1

52

1 2

30

45

2520

4,5

6

4559

42

M12x1

30


Distance detection

159

Easy connection of different fibre optics.

Manual or automatic setting by meansof „teach in“.

LED display to check operation,switching status and function.

Various fibre materials for differentapplications.

Easy mounting, also on DIN rail possible.

Fibre optics systems

If there is only little mounting space for standard photoelectric sensors, fibre opticscan be used. They are connected via fibre optic amplifiers which contain the controlmonitor and photoelectric components. There are two operating principles:

Through-beam principle

Transmitting and receiving fibre optics are laid separately. The two ends (fibre opticheads) are mounted opposite each other. The light beam interruption is evaluatedaccording to the through-beam principle.

Diffuse reflection principle

Transmitting and receiving fibre optics are in one sheath and one sensing head.Evaluation is based on the diffuse reflection principle.

Classification of the fibre optics

Glass fibre optics

Fibre optics made of silicate glass are more resistant to heat, ageing and chemicalsthan acrylic fibre optics. They do not change their optical response when they arebent. Glass fibre optics cannot be cut to length by the user.

Acrylic fibre optics

Acrylic fibre optics are suited for standard applications if no particular demandssuch as heat or chemical resistance are made. They can be cut to length and are lessexpensive than glass fibre optics.

High-flex fibre optics

If the minimum bending radius is not adhered to, the fibre is damaged. High-flexfibre optics allow extremely small bending radii.

Three versions of fibre optic amplifiers are available

Some versions of the OOF and OBF housings feature special functions: the functioncheck output indicates a problem of the unit before it fails (short circuit on the out-put, internal fault, low excess gain). The pulse stretching function (delay time)allows the user to set a minimum pulse duration on the switching output.

Minute objects up to0.5 mm are detectedsafely.

Fibre optic systemscan also be mounted

in places where accessis difficult.


160


OOF amplifiers for acrylic fibre optics 162

OBF amplifiers for acrylic fibre optics 162

Acrylic fibre optics for OBF / OOF housings, through-beam system 162 - 163

Acrylic fibre optics for OBF / OOF housings, through-beam system, highly flexible 163

Acrylic fibre optics for OBF / OOF housings, diffuse reflection system 163 - 164

OOF amplifiers for glass fibre optics 164

OKF amplifiers for glass fibre optics 164

OUF amplifiers for glass fibre optics 164 - 165

Glass fibre optics for OOF / OKF and OUF housings, through-beam system 165

Glass fibre optics for OOF / OKF and OUF housings, diffuse reflection system 166




Fibre optics

161

OOF amplifiers for acrylic fibre optics

Type Numberof inputchannels

Forfibreoptics

Typeof light

Sensingrange

through beam

Sensingrangediffuse


Ub

[V]

Draw-ingno.

Orderno.

Type OOF · M12 connector · plastics · DC · Wiring diagram no. 1 · Connector group 12

2 FE/FT-11 red 3.8 m 0...300 mm H/D PNP 12...36 1 OO5000



Type OOF · M16 connector · plastics · DC · Wiring diagram no. 6 · Connector group —


Type OOF · M16 connector · plastics · DC · Wiring diagram no. 7 · Connector group —


OBF amplifiers for acrylic fibre optics


Forfibreoptics

Typeof light

Sensingrange

through beam

Sensingrangediffuse


Ub

[V]

Draw-ingno.

Orderno.

Type OBF · M12 connector · plastics · DC · Wiring diagram no. 8 · Connector groups 7, 8

1 FE/FT-11 red 0...2 m 0...100 mm H/D PNP/NPN 10...30 5 OBF500

Acrylic fibre optics for OBF / OOF housings, through-beam system

Type System Fibre opticmaterial

RangeOB50.. / OBF5.. / OO50..

[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.

FE-11 PMMA 60 / 130 / 160 aluminium -40...70 PE (polyethylene) 6 E20612







[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.



FE-11 PMMA 140 / 230 / 400 stainless steel -40...70 PE (polyethylene) 10 E20714

FE-11 PMMA 200 / 450 / 800 stainless steel -40...70 PE (polyethylene) 11 E20750

Acrylic fibre optics for OBF / OOF housings, through-beam system, highly flexible



[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.



Acrylic fibre optics for OBF / OOF housings, diffuse reflection system



[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.

FT-11 PMMA 20 / 25 / 60 aluminium -40...70 PE (polyethylene) 13 E20639




FT-11 PMMA 15 / 25 / 60 stainless steel -40...70 PE (polyethylene) 17 E20748

Fibre optics




[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.



OOF amplifiers for glass fibre optics


Forfibreoptics

Typeof light

Sensingrange

through beam

Sensingrangediffuse


Ub

[V]

Draw-ingno.

Orderno.



OKF amplifiers for glass fibre optics


Forfibreoptics

Typeof light

Sensingrange

through beam

Sensingrangediffuse


Ub

[V]

Draw-ingno.

Orderno.

Type OKF · Cable 2 m · plastics · DC · Wiring diagram no. 9

1 FE/FT-00 red 0...0.12 m 0...40 mm H/D PNP 10...50 21 OK5001

Type OKF · M12 connector · plastics · DC · Wiring diagram no. 10 · Connector groups 7, 8

1 FE/FT-00 red 0...0.12 m 0...40 mm H/D PNP 10...50 22 OK5008

OUF amplifiers for glass fibre optics


Forfibreoptics

Typeof light

Sensingrange

through beam

Sensingrangediffuse


Ub

[V]

Draw-ingno.

Orderno.

Type OUF · Cable 2 m · plastics · DC · Wiring diagram no. 2

1 FE/FT-00 infrared 0.12 m 40 mm H PNP 10...55 23 OU5001

1 FE/FT-00 infrared 0.12 m 40 mm D PNP 10...55 23 OU5002




Forfibreoptics

Typeof light

Sensingrange

through beam

Sensingrangediffuse


Ub

[V]

Draw-ingno.

Orderno.

Type OUF · M12 connector · plastics · DC · Wiring diagram no. 3 · Connector groups 7, 8

1 FE/FT-00 infrared 0...0.12 m 0...40 mm H PNP 10...50 24 OU5043

Type OUF · M12 connector · plastics · DC · Wiring diagram no. 4 · Connector groups 7, 8

1 FE/FT-00 infrared 0...0.12 m 0...40 mm D PNP 10...50 24 OU5044

Glass fibre optics for OOF / OKF and OUF housings, through-beam system


RangeOOF / OKF / OUF

[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.

FE-00 glass 400 / 120 / 120 aluminium -20...80 PVC 25 E20059



FE-00 glass 160 / 50 / 50 stainless steel -20...80 PVC 28 E20061

FE-00 glass 400 / 120 / 120 aluminium -40...290 aluminium 29 E20128



FE-00 glass 400 / 120 / 120 stainless steel -20...150 metal silicone 32 E20493

Fibre optics


Glass fibre optics for OOF / OKF and OUF housings, diffuse reflection system


RangeOOF / OKF / OUF

[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.

FT-00 glass 200 / 40 / 40 aluminium -20...80 PVC 33 E20051



FT-00 glass 24 / 6 / 6 stainless steel -20...80 PVC 36 E20230

FT-00 glass 24 / 8 / 8 stainless steel -20...80 PVC 28 E20053

FT-00 glass 200 / 40 / 40 aluminium -40...290 aluminium 37 E20055



FT-00 glass 24 / 8 / 8 stainless steel -40...290 aluminium 40 E20057

FT-00 glass 200 / 40 / 40 stainless steel -20...150 metal silicone 41 E20489

FT-00 glass 200 / 40 / 40 stainless steel -20...150 metal silicone 42 E20494

Accessories


Lens attachment · Ø 5 mm / M3 · for through-beam fibre optics · Housing materials: aluminium black anodised / glass · Packquantity: 1

E20679

Lens attachment · Ø 6 mm / M4 · for through-beam fibre optics · Housing materials: aluminium black anodised / glass · Packquantity: 1

E20680




Lens attachment · D5x10-M4-ALU · for through-beam fibre optics · M4 · Housing materials: aluminium black anodised · Packquantity: 2

E20755

Angle bracket · OU · with mounting material · Housing materials: galvanised steel E20211

Mounting clamp · Ø 3 mm · for fibre optics · Housing materials: aluminium black anodised E20107

Mounting clamp · Ø 5 mm · for fibre optics · Housing materials: aluminium black anodised E20104

Core colours

BN brown

BU blue

BK black

WH white

Wiring diagrams

1

L+

L

1

4

2

7

3Out 2Out 1

2:4:

7: function check

2

BN

BK

BU

L+

L

3

L+

L

1

4

3

4

L+

L

1

2

3

5

4:2:5:

Out 1Out 2Out 3

6: Out 4

L+

L

1

4

6

7

3

7: function check

6

L+

L

A

E

T

O

L

E:P:S:

Out 1Out 2Out 3

G: Out 4C:T:

Out 5Out 6

O: function check

7

E:P:S:

Out 1Out 2Out 3

G: Out 4C:T:

Out 5Out 6

N:J:

Out 7Out 8

L+

L

A

E

J

O

L

O: function check

8

2

L

L+

4

1

3

4

L

L+

2

1

3

Fibre optics

167

Wiring diagrams

9

L

L+

BU

BK

BN

WH

L

L+

WH

BU

BK

BN

10

L+

2

4

1

3 LL

L+

4

2

1

3


1


2


3


4





5

15

36

LED

2

M12

x1

1

74

6044

3,2

1: mounting on DIN rail, 2: setting pushbuttons

6

15

M4

7

1811

M3

8

20

M4

1

1: glass lens

9

M6

30

1

1: glass lens

10

3530 2,

9

3

1 3

11

~110

1520

M4 2,

92

1

1: bendable

12

2012

M3

13

23

M4

16

14

26

M4

161

6

15

5

1

4,3

2012,3

3,4 6

1: Sensing surface

Fibre optics

169


16

35

M6

26

17

1520

M4

~110

2,9

1,6

1

1: bendable

18

20 3

19

3530

6

3

1

20


21

305

109

19LED

pot.

12,525

4,3

4,1

506M11x1

22

305

109

19LED

pot.

12,525

4,3

4,1

50M11x1

M12

x1

72

23

16

2849

pot.LED

740

4,3

3,5

51

21

6

43pot.LED

5

M11

x1

24

16

2849

pot.LED

740

51

2143

pot.LED

M12

x1

73

4,3

3,5

5

M11

x1

25

15

M4

26

2510 2,

53,

5




27

14

15

5

3

2,5

28

205 31

29

2515

M4

6

30

2510

3

6

31

14

166

3

3

32

14

16

6

3

3

33

25

M6

34

2510

3 4,5

35

14

16

6

4

3

36

15

3

1

6

37

3525

M6

38

25

10

3

7

Fibre optics

171


39

14

18

8

4

3

40

205

6

1

41

4525

M6 7

42

2510

3

7



Fibre optics

173

High-quality photoelectric sensors fordifferent applications.

Excellent price / performance ratio.

Easy adjustment via teach buttons or potentiometer.

Wide range of system components for easy and safe mounting.

Detection of transparent objects

Counting bottles and glasses or the reliable monitoring of film for tear can beperformed without problem using specially designed retro-reflective sensors.ifm electronic offers a retro-reflective sensor with a small switching hysteresis, inparticular for the detection of transparent objects. Due to the operating principle,retro-reflective sensors have the advantage that the light beam must pass the objectto be detected twice, weakening the light sufficiently to detect a transparent objectreliably. Precise adjustment is made by means of the teach buttons.

Contrast sensor

The O5 contrast sensor is specially suitable for detecting print marks and particularlyflat objects.

With its RGB transmitter LED the sensor detects even very small differences incontrast. During set-up it automatically selects the optimum transmitter colour fromthe colours red green blue (RGB) to ensure maximum energy difference of thereflected light. In addition, the teach method saves time and money. Pressing theteach buttons twice is enough for the sensor to be ready for operation.

High-resolution colour sensor

The new electronic colour sensor from ifm electronic detects the colour, packaging,label or imprint of objects at a high resolution. With the five selectable tolerancesteps, the colour sensor perfectly differentiates even the finest shades of colourfrom the background or other objects. The unit is set to the colour to be detectedby one push of the button. This saves time and money.

Optical fork and angle sensors

The optical fork and angle sensors are made from distortion-resistant diecast zincand feature a high switching frequency. Applications are in particular part monitor-ing in feeding technology and handling systems. Further application examples arebelt edge and double feed monitoring.

Sensitivity setting using the potentiometer and setting of light-on / dark-on modeusing the rotary switch are simple and time-saving. No complex adjustment isrequired because transmitter and receiver are already aligned towards each other.Due to the fine and precise red light beam which is constant across the entire forkwidth, out-of-balance monitoring of shafts can also be carried out.

Typical application forcontrast sensors:Counting of glassbottles.

The optical fork andangle sensors are

especially used forpart monitoring in

feeding technologyand handling systems.


174


Sensors for the detection of transparent objects 176

Sensors for colour detection 176

Photoelectric sensors 176

Optical fork sensors 176 - 177

Optical angle sensors 177 - 178

Prismatic reflector 178


Accessories for system components 178

Wiring diagrams 179



175

Sensors for the detection of transparent objects


[mm]

Typeof light



Wiringdiagr.

no.

Draw-ingno.

Orderno.


Polarisation filter 0.2...1.5 m red 64 H/D PNP 1 1 OJ5086

Sensors for colour detection

Type Operating principle Measuringrange

Light spotdiameter

[mm]

Ub

[V]

Currentconsumption

[mA]

Sampling rate /switching frequency

[Hz]

Draw-ingno.

Orderno.

Colour sensor · M12 connector · 12...30 DC · metal · IP67 · Connector group 10

Colour sensor 12.5 mm 2 x 4 12...30 80 1000 2 OD5005

Colour sensor 60 mm 13 12...30 80 1000 2 OD5007

Colour sensor · M12 connector · 12...30 DC · metal · IP67 · Connector group —

Colour sensor 60 mm 13 12...30 80 300 2 OD5011


Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector group —

M12 / L = 63 50 f high-grade st. steel 10...30 IP68 1600 100 3 JAC201


Optical fork sensors

Type Fork width(w)

[mm]

Fork depth(d)

[mm]

Smallestdetectableobject Ø

[mm]

Switchingfrequency

[Hz]


Ub

[V]

Draw-ingno.

Orderno.

Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 5 · Connector groups 1, 2, 3

10 17 0.3 10000 H/D PNP/NPN 10...35 4 OPU200



Type Fork width(w)

[mm]

Fork depth(d)

[mm]


[mm]

Switchingfrequency

[Hz]


Ub

[V]

Draw-ingno.

Orderno.

Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 3 · Connector groups 1, 2, 3

20 25 0.4 4000 H/D PNP 10...35 5 OPU201

50 55 0.5 4000 H/D PNP 10...35 6 OPU203

80 55 0.5 4000 H/D PNP 10...35 7 OPU204

120 60 0.8 2000 H/D PNP 10...35 8 OPU205

Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 4 · Connector groups 1, 3

20 25 0.4 4000 H/D NPN 10...35 5 OPU207

30 35 0.5 4000 H/D NPN 10...35 9 OPU208

50 55 0.5 4000 H/D NPN 10...35 6 OPU209

80 55 0.5 4000 H/D NPN 10...35 7 OPU210

120 60 0.8 2000 H/D NPN 10...35 8 OPU211

Optical angle sensors

Type Side length(x, y)

[mm]

Sensor width(z)

[mm]


[mm]

Switchingfrequency

[Hz]


Ub

[V]

Draw-ingno.

Orderno.

Optical angle sensor · Type OPL · M8 connector · metal · DC · Wiring diagram no. 3 · Connector groups 1, 2, 3

50 60 0.5 4000 H/D PNP 10...35 10 OPL200

80 100 0.7 4000 H/D PNP 10...35 11 OPL201



Type Side length(x, y)

[mm]

Sensor width(z)

[mm]


[mm]

Switchingfrequency

[Hz]


Ub

[V]

Draw-ingno.

Orderno.

Optical angle sensor · Type OPL · M8 connector · metal · DC · Wiring diagram no. 4 · Connector groups 1, 3

50 60 0.5 4000 H/D NPN 10...35 10 OPL202

80 100 0.7 4000 H/D NPN 10...35 11 OPL203

Prismatic reflector



Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials:plastics

E20722












Wiring diagrams

1

L+

2

4

1

3 L2: Teach

2

L+

L

1

4

3

3

L+

L

1

4

3

4

L+

L

1

4

3

5

L+

L

1

4

3

L+

L

1

4

3


1

45

11

LED

8,2

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

9

LED

4

1

1: pushbutton

2

43

80

M12

x1

96

28

21 30

M5

M12

x1

3928

4053

69

M5

15

1

LED

LED

2

3

4

1: lens, 2: selection switch color tolerance, 3: programming selectorswitch, 4: teach button

3

M12

x1

174

M12

x1

5263

LED 4 x 90°

43


179


4

6M8x

1

10

4,34,5

4,5

12,5

10

W=

10

4

D = 17

4525

LED

12

22

10

1: output function switch , 2: potentiometer sensitivity

5

W=

20

4,34,5

4,5

D=25

5

50

M8x

1

10

LED

12,5 10

10

4,5

12 20,5

10

1: potentiometer sensitivity, 2: output function switch

6

12

2030

10

M8x

1

10

LED

4,34,5

4,5

4,5

12,5

1010

W=

50

5

D = 55

80


7

12

2030

M8x

1

10

LED

4,34,5

4,5

4,5

12,5

10

1010

W=

80

5

D = 55

80


8

37

5262

12

M8x

1

10

LED

4,3 5 20

2222

1212

W=

120

10

D = 60

90


9

12

2030

M8x

1

10

LED

4,34,5

4,5

4,5

12,5

10

1010

W=

30

5

D = 35

60


10

7510

Z60

Y=

5075

22,5

4,3

4,5

4,5

4250

X=50

M8x

1

42

50

10,5LED

17,5 25

,5 35,5

10





11

10510

Z

100

Y=

8010

522

,5

4,3

4,5

4,5

7280

X=80

M8x

1

72

80

10,5LED

7280

4,3

6,7

17,5 25

,5 35,5

10



181

Slim design with ranges up to 20 m for all protected areas.

Type 2 and type 4 safety light curtains to IEC 61496.

With SIL 2 & 3 to IEC 61508 and PL d & e to ISO 13849.

Can be installed in L shape without dead band.

Easy connection via the tried and tested M12 connector.

Safety light curtains and light grids

Safety light curtains and safety light grids are used where movements of machineparts represent a risk for people or goods.

The difference of the systems is the different resolution of the beams.

Depending on the risk, the protective function is classified into finger, hand or bodyprotection as well as primary guarding. When the light beam is interrupted, theprotective equipment ensures deactivation of the outputs. The machine is broughtinto the state defined as safe.

Tested safety

The safety light curtains and light grids from ifm electronic have been developedaccording to the current standards EN 61496, ISO 13849-1 and IEC 62061 andcertified by TÜV. They meet the requirements of type 2 with SILcl 2 and PL d as wellas type 4 with SILcl 3 and PL e.

Slim design or long range

The safety light curtains and safety light grids from ifm electronic are distinguishedby the very slim design (28 x 30 mm) and long ranges up to 20 m. Finger, hand andbody protection reliably ensure primary guarding or access prevention. ifm offersnew safety light grids for applications with especially long ranges. The new housingof our OY9 is slightly bigger and offers a range up to 60 m.

These light curtains are designed for protected area heights of 160 mm to 1510mm in intervals of 150 mm. A resolution (detection capacity) of 14, 20, 30, 40, 50or 90 mm can be selected. Light grids are offered with 2, 3 or 4 beams.

Safety light grids are also available as active / passive system.

Safety light curtainscan be used for fingeror hand protection.

Safe protection ofbodies on a robot cell.


182


Safety light curtains type 4, SIL 3, PL e, resolution 14 mm, protected area width up to 6 m 184

Safety relays for safety light curtains 184

Wiring diagrams 185



183

Safety light curtains type 4, SIL 3, PL e, resolution 14 mm, protected area width up to 6 m

Type Sensorlength

[mm]

Resolution /detection capacity

[mm]

Protected areaheight

[mm]

Protected areawidth

[m]

Responsetime

[ms]

Ub

[V]

Draw-ingno.

Orderno.

M12 connector · Wiring diagram no. 1 · Connector group 12

213 14 160 0...3 / 1...6 4 24 1 OY001S

363 14 310 0...3 / 1...6 5.5 24 1 OY002S

513 14 460 0...3 / 1...6 7.5 24 1 OY003S

663 14 610 0...3 / 1...6 9 24 1 OY004S

813 14 760 0...3 / 1...6 11 24 1 OY005S

963 14 910 0...3 / 1...6 13 24 1 OY006S

1113 14 1060 0...3 / 1...6 14.5 24 1 OY007S

1263 14 1210 0...3 / 1...6 16.5 24 1 OY008S

1413 14 1360 0...3 / 1...6 18 24 1 OY009S

Safety relays for safety light curtains

Type Description Draw-ingno.

Orderno.

Safety relay · Muting relay · Housing for DIN rail mounting · For the connection of safety light curtains / safety light grids with OSSD · Safety category type 4 to IEC 61496 · for industrial applications

2 G2001S

Safety relay · Relay outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · – · Complies with the requirements: · ISO 13849-1:2008

category 4 PL e · SIL 3 (IEC 61508) · Type IIIC (EN 574)3 G1501S

Safety relay · Relay outputs · can be set with and without timer function · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · – ·

Complies with the requirements: · PL e (EN ISO 13849-1) · SIL 3 (IEC 61508) · SILcl 3 (IEC 62061) · Type IIIC (EN 574)4 G1502S

Safety relay · Semi-conductor outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · – · Complies with the requirements: ·

SIL 3 (IEC 61508) · SILcl 3 (IEC 62061) · Type IIIC (EN 574) · PL e (EN ISO 13849-1)5 G1503S



Wiring diagrams

1

5

4

3

2

6

7

1OSSD1

OSSD2

K1/K2/Restart

SEL_A

SEL_B

8

L+

L


1

40 2010

3

1010,528

28

5,5

40

10

2010

1,5

M5

14,5

30

28

T

M12x1

1129

,561

,5

L

R

T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2: LED 2 colours (yellow/blue), 3: LED 2 colours (red/green)

2

114,5

99

35

3

25

100

LED

35,5

105

1: Combicon connector with screw terminals, 2: mounting on DIN rail

4

114

LED

50 105

35,5

1: Rotary switch for switch-off delay, 2: Combicon connector withscrew terminals, 3: mounting on DIN rail

5

25

100

LED

105

35,5



185

2D vision sensor for object recognition.

3D sensor for assessment of distance, level or volume.

3D camera for spatial detection of scenes and objects.

Illumination units with high luminous power.

Tough, industrial housings.

2D vision sensor for object recognition

In automation technology visions sensors are an integral part of assembly andmanufacturing tasks as well as quality control and thus increase efficiency. They arecameras with application-specific evaluation, i.e. reliable electronic eyes at a lowcost and a high degree of integration. In a robust, industrially compatible housingthey combine lighting, lens, camera chip, evaluation and process connections forthe integration in the higher-level controller.

The application possibilities of efector dualis range from presence, position andorientation monitoring, via sorting and counting tasks to quality control.

3D sensor for assessment of distance, level or volume

efector pmd 3d is the first industrial 3D sensor that can assess objects in threedimensions at a glance.

Special feature: The time-of-flight measurement and evaluation are integrated onone chip. Each pixel of this chip matrix evaluates its distance to the object. Theimage of the object on the chip matrix and the respective distance valuescorrespond to a 3D image.

This technology enables the detailed assessment of the object’s or scene’s condi-tions by means of volume, distance or level detection in three dimensions. Typicalapplications are completeness checks and level monitoring in the food industry aswell as presence and dimension monitoring in conveying.

3D camera for detection in three dimensions of scenes and objects

The pmd 3d camera detects scenes and objects in their spatial dimensions at aglance. In contrast to laser scanners it does not require moving components and isthus robust and wear-free. The operating principle is the same as for the 3D sensor.

Besides the 3D distance image the camera provides a grey image of the scene. Thecombination of these images offers integrators the possibility to freely programapplication-specific tasks by means of a software development kit. This results inlow-cost application solutions in the areas of packaging, storage and materialshandling, airport logistics, collision avoidance, robotics, monitoring of space andpersons.

Set-up in just a fewsteps: The profes-sional and easy menuguidance allowsconfiguration of theefector dualis to yourapplication in just sixoperating steps.

Object recognition

186


Sensors for object recognition with PNP output function 188

Sensors for object recognition with NPN output function 188

Illumination units, spotlight 188

Illumination units, backlight 189

Software for 2D sensors 190

Fixing components for 2D sensors 190 - 191

Reflective tapes, diffusers and protective panes for 2D sensors 191

Sensors for 3D object recognition 191

Software for 3D sensors 191

Fixing components for 3D sensors 191 - 192

Connection cables for 2D and 3D sensors 192



Object recognition

187

Sensors for object recognition with PNP output function

Type Operatingprinciple

Max.field of view size

[mm]

Resolution Detectionrate

[Hz]

Typeof light

Ambienttemperature

[°C]

Draw-ingno.

Orderno.

Type O2D2 · M12 plug, 8 poles M12 socket, 4 poles · metal · DC · Connector groups 11, 12

CMOS image sensor B/W,VGA resolution 640 x 480

400 x 300 0.08 10 infrared -10...60 1 O2D224


640 x 480 0.1 10 infrared -10...60 2 O2D220


1280 x 960 0.3 10 infrared -10...60 2 O2D222

Sensors for object recognition with NPN output function


Max.field of view size

[mm]

Resolution Detectionrate

[Hz]

Typeof light

Ambienttemperature

[°C]

Draw-ingno.

Orderno.

Type O2D2 · M12 plug, 8 poles M12 socket, 4 poles · metal · DC · Connector groups 11, 12


400 x 300 0.08 10 infrared -10...60 1 O2D225


640 x 480 0.1 10 infrared -10...60 2 O2D227


1280 x 960 0.3 10 infrared -10...60 2 O2D229

Illumination units, spotlight

Type Dimensions

[mm]

Typeof light

Activeilluminated

area[mm]

I0normal light

intensity[mA]

I0high lightintensity

[mA]

Trigger Draw-ingno.

Orderno.

M12 connector · metal · DC · Wiring diagram no. 2 · Connector groups 7, 8

42 x 42 x 31 red – 180 90External; 24 V PNP to

IEC61131-13 O2D909

Object recognition


Illumination units, backlight

Type Dimensions

[mm]

Typeof light

Activeilluminated

area[mm]

I0normal light

intensity[mA]


[mA]

Trigger Draw-ingno.

Orderno.

PUR cable 2 m · metal · DC · Wiring diagram no. 1

66.5 x 33.4 x 9.2 red 25 x 25 50 25External; 24 V PNP to

IEC61131-14 O2D900

66.5 x 33.4 x 9.2 infrared 25 x 25 50 25External; 24 V PNP to

IEC61131-14 O2D901

103 x 81 x 9.2 red 50 x 50 200 100External; 24 V PNP to

IEC61131-15 O2D902

103 x 81 x 9.2 infrared 50 x 50 200 100External; 24 V PNP to

IEC61131-15 O2D903


IEC61131-16 O2D904


IEC61131-16 O2D905

PUR cable 0.15 m · metal · DC · Wiring diagram no. 2 · Connector groups 7, 8

66.5 x 33.4 x 9.2 red 25 x 25 50 25External; 24 V PNP to

IEC61131-14 O2D910

66.5 x 33.4 x 9.2 infrared 25 x 25 50 25External; 24 V PNP to

IEC61131-14 O2D906


IEC61131-15 O2D911


IEC61131-15 O2D907


IEC61131-16 O2D912


IEC61131-16 O2D908

Object recognition


Software for 2D sensors


Operating software · O2D E2D200

Fixing components for 2D sensors


Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 12 mm · Housing materials: fixture: stainless steel / clamp:stainless steel

E2D110


E2D112

Mounting set · Backlight 25 x 25 mm · Clamp mounting · Housing materials: Mounting plate: stainless steel / clamp: high-gradestainless steel

E2D107


E2D108


E2D109

clamp · Ø 14 mm; M12 · free-standing M12 · Housing materials: clamp: stainless steel E20948






Object recognition




Reflective tapes, diffusers and protective panes for 2D sensors


Plastic diffuser · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21165

Glass protective pane · O2D / O2I · Housing materials: housing: diecast zinc black / lens: float glass E21168

Sensors for 3D object recognition


Resolution

[pixels]

Angle of aperture(horizontal x vertical)

[°]

Lighting Max.sampling

rate[Hz]

Ambienttemperature

[°C]

Draw-ingno.

Orderno.

PMD 3D sensor · Type O3D · M12 connector · metal · DC · Connector groups 11, 12

PMD 3D sensor 64 x 48 30° x 40° Infrared LED 20 -10...50 7 O3D200

PMD 3D camera · Type O3D · M12 connector · metal · DC · Connector groups 11, 12

PMD 3D camera 64 x 48 30° x 40° Infrared LED 20 -10...50 7 O3D201

Software for 3D sensors


Operating software for PMD 3D camera · O3D E3D201

Fixing components for 3D sensors



Object recognition




Connection cables for 2D and 3D sensors


Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR / PC E11898

Socket · ifm electronic · angled · Free from silicone · Free from halogen · gold-plated contacts · M12 connector · 2 m · Housingmaterials: PUR

E11231

Socket · ifm electronic · angled · Free from silicone · Free from halogen · gold-plated contacts · M12 connector · 5 m · Housingmaterials: PUR

E11232

Socket · ifm electronic · straight · Free from halogen · M12 connector · 5 m · Housing materials: PUR E11807



Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080

Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 5 m · Housing materials: PUR E30112

Core colours

BK black

BN brown

BU blue

WH white

Wiring diagrams

1

L+

L

BN

BK

WH

BU

black: Trigger, white: Operating mode “high lightintensity”

Object recognition


Wiring diagrams

2

L+

L

1

4

2

3

1: Trigger, 2: Operatingmode “high light intensity”


1

M12x1

2

19

M12x1

42

57

8060

21

9,57

3 59

4,3

20,5

49,5

25,238,5

1

45

24,5

1: display, 2: Focus setting, 3: Centre of the lens axes

2

M12x1

2

19

M12x1

53,5

4,3

20,5

44

19,7

33

1

45

24,5

42

57

8060

21

9,57

3


3

31

4,3

14

30

LED

24M12 x1

54

LED

42

4

9,233,425

25

21,9

66,5

1934

3 LED

12,6

5

8150

50

103

90

68

3,3

4,3

3 LED

24,6

9,8

6

9,8133100

100 15

614

1

119

7,3

3 LED

3,3

6

631

Object recognition

193


7

95

60,540

4563

,8

16

75

137

120

123,

5

18

M12x1

M12x1

94

21,5

1: lens, 2: Illumination unit, 3: Display / buttons / LEDs, 4: Focus setting

Object recognition


Object recognition

195

Robust designs.

Industrial standard housings.

Cable entry for axial and radial use.

Designs with integrated bus interface.

Hollow shaft encoder for direct mounting on actuators.

Encoders

In many manufacturing and production processes encoders are indispensable asreliable transducers to ensure precise positioning. They convert rotary movementinto digital signals. Encoders use the wear-free photoelectric detection. A pulse discfirmly attached to the shaft ensures this detection.

Incremental encoders

Incremental encoders generate a precisely defined number of pulses per revolution.They are a measure of the angular or linear distance moved.

The coded disc is divided into separate segments which are alternately transparentor opaque. An LED emits a parallel-orientated light beam which illuminates all seg-ments of the coded disc. Photo elements receive the modulated light and convert itinto two sinusoidal signals. Digitalisation electronics amplify the signals and shapethem into square-wave pulse trains which are generated via the line driver in theoutput. The phase difference between signals A and B, which are phase-shifted by90 degrees, allows evaluation of the direction of rotation.

Absolute encoders

Absolute encoders provide an absolute numerical value for each angular position.This code value is available immediately after power is applied. This “absolute”value makes a reference procedure like the one required for the incrementalencoder unnecessary. Absolute encoders are used wherever angular positions haveto be allocated to a certain value and where the detection of the present position isabsolutely necessary in the case of a power failure.

Singleturn and multiturn

Singleturn encoders divide a mechanical revolution (0 to 360 degrees) into a certainnumber of measuring steps. The measuring values are repeated after one revolu-tion. The maximum resolution is 8192. Multiturn encoders, however, do not onlydetect angular positions but also distinguish between multiple revolutions.

Linear measurementby means of a count-er: Rotary movementis converted intodigital signals.

Hollow shaft encoderfor direct mounting

on the axis.

Encoders

196


Incremental encoders with solid shaft 198

Connectors for encoders 198

Couplings for encoders 198

Fixing accessories for encoders 199


Encoders

197

Incremental encoders with solid shaft

Type Resolution Ub

[V]

f

[kHz]

Iload

[mA]

Shaft

[mm]

Ambienttemperature

[°C]

Cableentry

Draw-ingno.

Orderno.

Cable 2 m · Output function TTL output 20 mA

1000 5 300 20 6 -40...100 radial / axially 1 RU1024

2000 5 300 20 10 -40...100 radial / axially 2 RV1033

Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min

500 10...30 300 50 10 -40...100 radial / axially 2 RV6016

Connectors for encoders


Socket · ifm electronic ifm 1001.2 · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60124

Couplings for encoders


Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60065




Flexible coupling with adjusting screw connection [SV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60063

Encoders


Fixing accessories for encoders


Angle bracket · for encoders · for type RM, RMU, RN, RU · Housing materials: aluminium black anodised E60034

Angle bracket · for encoders · for type RMV, RV · Housing materials: aluminium black anodised E60035


1

4

3

650 58

3

10

h7

46,7±0,5

6

120°

421 2

1: reference mark, 2: M4 5 mm deep

2

10

36 58

f8

1

1,52046,7±0,5

106

48

120°

1 2

1: reference mark, 2: M3 5 mm deep

Encoders

199

Easy adjustment and parameter setting.

Primary voltage 24V dc or110 / 230V ac, wide-range input.

Programmable switching characteristics.

Standstill, overspeed, direction, slip andfrequency conversion, counter.

Switching relays and transistor outputs,scalable analogue output.

Evaluation systems

Although PLC applications in industrial automation are becoming more and moreversatile there are still numerous processes in practice which require decentralisedmonitoring.

For this ifm electronic offers a number of pulse evaluation systems in the productgroup “ecomat 200”. The application area ranges from simple standstill monitoringor blockage protection of a conveyor belt, maximum speed monitoring in windpower stations, slip monitoring of couplings through to direction monitoring, e.g.twin pumps with non-return valves.

Different units for rail mounting and compact designs in M18 and M30 metalhousings are available. They include microprocessor-controlled units for panemounting to display analogue signals, RPM, speeds, processing times, quantitiesand electronic preset counters for the detection of quantities or linearmeasurement.

All units are distinguished by a high reliability and easy handling. Independent ofthe PLC they indicate operating states or signal faults. This helps to reduce down-times and production loss.

ifm electronic offers the following evaluation systems:

– Speed monitors

– Standstill monitors

– Slip / synchronisation monitors

– Direction monitors

– Frequency-to-current converters

– Threshold relays

– Displays with frequency and analogue input

– Counters

– Switching amplifiers

Pulse evaluationsystems are used fordecentralised moni-toring of drives.

Machine cycles mustalso be monitored in

conveying.

Evaluation systems

200


Universal speed monitors 202

Universal speed monitors with sensor wire monitoring 202

Dual speed monitors 202

Slip monitors 202 - 203

Slip / synchronous monitors 203

Frequency-to-current converters 203

Standard speed monitors 203 - 204

Standstill monitors 204

Speed monitor with integrated sensor 204

Multifunctional displays for digital signals / frequency input 205

2-channel threshold relay for analogue standard signals 205

Multifunctional displays for analogue standard signals 205


Wiring diagrams 206


Evaluation systems

201

Universal speed monitors

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

FR-1 · 2 switch points for monitoring overspeed/underspeed and acceptable range

230 AC (50...60 Hz) / 24 DC

1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2001

110...240 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2003

Universal speed monitors with sensor wire monitoring

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

FR-1N · 2 switch points for monitoring overspeed/underspeed and acceptable range

110...240 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)1 Namur 8.2 V 1...60000 0.1...1000 1 2 4 1 DD2103

Dual speed monitors

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

FR-2 · 1 switch point each for monitoring overspeed/underspeed and acceptable range

230 AC (50...60 Hz) / 24DC

2 PNP / NPN / Namur 1...60000 0.1...1000 – 2 2 1 DD2002

23...60 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)2 PNP / NPN / Namur 1...60000 0.1...1000 – 2 2 1 DD2006

Slip monitors

Type Ub

[V]

In-puts

Inputfunction

Setting range Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

FS-1 · 1 switching output for slip monitoring; 1 switching output for overspeed/underspeed and acceptable range

230 AC (50...60 Hz) / 24 DC

1 PNP / NPN / Namurslip: 0.1...99.9 % rotational speed(frequency): 1...60000 pulses/min

(0.1...1000 Hz)2 2 1 DS2001

Evaluation systems


Type Ub

[V]

In-puts

Inputfunction


relays

Out-puts

transist.

Draw-ingno.

Orderno.

FS-1 · 1 switching output for slip monitoring; 1 switching output for overspeed/underspeed and acceptable range

110...240 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)1 PNP / NPN / Namur

slip: 0.1...99.9 % rotational speed(frequency): 1...60000 pulses/min

(0.1...1000 Hz)2 2 1 DS2003

Slip / synchronous monitors

Type Ub

[V]

In-puts

Inputfunction


relays

Out-puts

transist.

Draw-ingno.

Orderno.

FS-2 · 2 switch points for slip/synchronous monitoring

110...240 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)1 PNP / NPN / Namur

pulse differences: 1...999 reset time: 0.0...1000.0 s

2 2 1 DS2005

Frequency-to-current converters

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

FA-1 · Conversion of pulse sequences into analogue standard signals

27 DC (typ. 24 DC) 1 PNP / NPN / Namur 0...600000 0...10000 2 1 1 1 DW2004

110...240 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)1 PNP / NPN / Namur 0...600000 0...10000 2 1 1 1 DW2003

Standard speed monitors

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

D100 · evaluation of pulse sequences with regard to overspeed and underspeed; rotational speed monitoring

230 AC (50...60 Hz) / 24 DC

1 PNP 5...5000 – – 1 – 2 DD0001

12 / 24 DC 1 PNP 5...5000 – – 1 – 2 DD0008

230 AC (50...60 Hz) / 24 DC

1 PNP 10...10000 – – 1 – 2 DD0022

Evaluation systems


Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

D100 · evaluation of pulse sequences with regard to overspeed and underspeed; rotational speed monitoring

110...240 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)1 PNP 5...5000 – – 1 1 2 DD0116

27...60 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)1 PNP 5...5000 – – 1 1 2 DD0122

Standstill monitors

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

A300 · Evaluation of pulse sequences with regard to underspeed or missing pulse

230 AC (50...60 Hz) / 24 DC

1 PNP5...25 /

20...100– – 1 – 3 DA0001

110...240 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)1 PNP

5...25 /20...100

– – 1 1 3 DA0116

Speed monitor with integrated sensor

Type Dimensions

[mm]

Sensingrange

[mm]

Electricaldesign

Ub

[V]

Settingrange

[puls. / min.]

Start-updelay

[s]

Draw-ingno.

Orderno.

Output · Wiring diagram no. 1 · Connector groups 7, 8

M18 / L = 68 12 nf DC PNP 10...36 DC 3...6000 0...15 4 DI6001

Output · Wiring diagram no. 2

M30 / L = 81 10 f AC/DC 20...250 AC/DC 5...300 12 5 DI0001*

Output · Wiring diagram no. 3

M30 / L = 81 10 f DC PNP 10...36 DC 30...3000 15 5 DI5003




Evaluation systems


Multifunctional displays for digital signals / frequency input

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

FX 360 · universal evaluation and display for all physical units which can be derived from pulse sequences

115/230 2 PNP / NPN – – 2 – – 6 DX2002

2-channel threshold relay for analogue standard signals

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

AL-3 · 2-channel analogue threshold relay for analogue standard signals

110...240 AC/DC (50...60 Hz) / 27 DC

(typ. 24 DC)2 2 x 0 / 4...20 mA – – 1 1 1 7 DL2003

Multifunctional displays for analogue standard signals

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange

[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

AX 360 · universal unit for the display of analogue standard signals (e.g. of pressure, temperature,or flow sensors)

115/230 20/4...20 mA /

0...10 V– – – – 2 6 DX2012

Accessories






Evaluation systems



Target wheel · Plastic disk with 8 screws as „target„ · Centered drill holes E89010

Core colours

BN brown

BU blue

BK black

Wiring diagrams

1

4

L

L+1

2

3

2: pulse output (the pulsesequence corresponds to the damping frequency), 4: switching output (adjustable)

2

BN

BU

L+L1

LN

3

BN

BK

BU

L+

L


1

45

78

1 4 652

19 20 21 22 23 24

13 14 15 16 17 18

3

97A1 8A2 10 11 12

120

35,5

1


2

55

75

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

110

35,5

1


3

55

75

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

110

35,5

1


4

M12

x1

77

5640

M18

x1

68

10

4

2421

1: 3 LED, 2: setting pushbutton

5

36

8167

58

5

M30

x1,5

9

18

2 LED

pot. 61

Evaluation systems



6

96

48

129 9

7

45

78

1 4 652

19 20 21 22 23 24

13 14 15 16 17 18

3

97 8 10 11 12

120

35,5

1


Evaluation systems

207

Evaluation systemsfor safety and EX

208


209

Safety

System description / System overviewProduct selection chartScale drawings / drawing no. – CAD download: www.ifm.com

210 - 211212

212 - 213

EX


214 - 215216216

Multifunctional with relay outputs or semiconductor outputs.

Connection of electro-sensitive protective equipment.

e-stop and possibility to connect mechanical safety relays.

Two-hand control to EN 574 up to type IIIC, mechanical or electronic.

Certified to IEC 61508, ISO 13849-1, EN 574.

Safety relays for protection of operators and machinery

The EC machinery directive stipulates machinery should not present a risk (EN1050and EN ISO 14121-1). Since there is no zero risk, the aim is to achieve an acceptableresidual risk. If safety is dependent on control systems, these must be designed soas to minimise malfunction.

For this, ifm offers multifunctional safety relays. A major advantage of these units istheir flexibility. They perform monitoring tasks in safety applications in conjunctionwith different electro-sensitive protective equipment (ESPE).

On the safe side.

The relays are certified according to IEC 61508 SIL3, ISO 13849-1 PL e and EN 574up to type IIIC.

They have several multifunctional self-detecting and self-monitoring inputs as wellas short-circuit proof outputs. Concerning the type of output the user can selectbetween relay outputs and semiconductor outputs. Moreover, outputs with switch-off delay are available for specific applications.

It is possible to connect OSSD sensors, mechanical switches (e-stop) or implementtwo-hand applications with electronic or mechanical switches. When used as two-hand control devices, the requirements of type IIIB to EN574 can be met.

The units have a simultaneity monitoring of inputs. The offer the functions“automatic start” or “monitored start” and also allow monitoring of external relaycontacts.

Mechanical as well aselectronic safety sen-sors can be connectedto the safety relays.

Safety relays monitorcomplete series of

safety sensors.


210


Safety relays with relay outputs for fail-safe sensors 212

Safety relays with solid state outputs for fail-safe sensors 212

Safety relays for safety light curtains 212

Accessories 212


Safety

211

Safety relays with relay outputs for fail-safe sensors

Type Ub

[V]

Sensorinput /output

Safety-relatedoutput

Signalcontacts

(NC)

Feedbackcontacts

Responsetime[ms]

Offdelay[ms]

Draw-ingno.

Orderno.

24 DC (19.2...30 DC)

1/2 2 1 1...n < 180 – 1 G1501S

24 DC (19.2...30 DC)

1/2 5 3 1...n < 100 – 2 G1502S

Safety relays with solid state outputs for fail-safe sensors

Type Ub

[V]

Sensorinput /output


Signalcontacts

(NC)

Feedbackcontacts

Responsetime[ms]

Offdelay[ms]

Draw-ingno.

Orderno.

24 DC (19.2...30 DC)

1/2 2 1 1...n < 100 – 3 G1503S

Safety relays for safety light curtains

Type Ub

[V]

Sensorinput /output


Signalcontacts

(NC)

Feedbackcontacts

Responsetime[ms]

Offdelay[ms]

Draw-ingno.

Orderno.

24 DC (19.2...28.8 DC)

2/2 2 1 – < 20 – 4 G2001S

Accessories


Safety T-splitter · ifm electronic · T-piece for the pseudo-serial connection of fail-safe sensors · Housing materials: PUR E11569


1

25

100

LED

35,5

105





2

114

LED

50 105

35,5

1: Rotary switch for switch-off delay, 2: Combicon connector withscrew terminals, 3: mounting on DIN rail

3

25

100

LED

105

35,5


4

114,5

99

35

Safety

213

One or two-channel NAMUR switching amplifiers to IEC 60947-5-6.

Short-circuit and wire-break monitoring.

Programmable output function.

Relay or transistor outputs.

Easy mounting on DIN rail.

Hazardous gas and dust areas

ATEX stands for “atmosphère explosible“. The 94/9/EC and 1992/92/EC directivesare also commonly called “ATEX directives”.

You can find hazardous areas in many different industries. Examples are the foodand feedstuffs industry, woodworking, disposal and recycling operations and thetypical industries of chemistry, for example gas and oil-processing plants.

It is basically distinguished between “G” (gas, i.e. fog, steams) and “D” (dust).There are three unit categories each for gas and dust (1 - 3) that are analogous tothe gas zones 0 / 1 / 2 or dust zones 20 / 21 / 22. Example: Electrical apparatus ofthe 1G category may be operated in zone 0.

NAMUR switching amplifiers for hazardous areas

The one or two-channel NAMUR switching amplifiers evaluate the sensor signal andcontrol the output. They meet all requirements of the ATEX directives. Switchingamplifiers with relay and transistor output are available. The switching amplifiers aredesigned for the connection of NAMUR sensors to IEC 60947-5-6 and mechanicalswitches. They provide the voltage supply via an electrical separation for theintrinsically safe circuit.

Further features of the switching amplifiers are:

– Programmable effective direction of the output.

– Relay output designed as changeover contact.

– Short-circuit proof transistor outputs.

– The sensor cables are monitored for wire break and short circuit. In case of a�fault, the output is blocked or the relay is de-energised.

Typical hazardous gasareas are found in thechemical industry, forexample in gas andpetroleum processing.

Examples for thehazardous dust areas

are the food andfeedstuffs industries,but also disposal andrecycling operations.


214




EX

215


Type Ub

[V]

Power / currentconsumption

[VA] / [mA]

f

[Hz]

Ta

[°C]

Output Protection Draw-ingno.

Orderno.

230 1.0 / 10 -20...60 relay (1 changeover contact) IP20 1 N0031A


1

112

35,5

20

120

LED

1

1: Combicon plug with screw terminals (optional)



EX

217

No movings parts means highreliability and long life.

Guided wave radar, capacitive andhydrostatic level sensors.

Outputs for continuous or point levelmeasurement.

Integrated LED display for localindication of the current level.

Suitable for common industrial andprocess fluids.

Level sensors

In industrial applications where fluids or bulk material are used, storage tanks orsilos are used for processing or storing of media. Sensors are used to detect thelevels. Even critical process conditions such as emptying a hydraulic tank or theunintentional overspill of a tank are monitored by level sensors.

Advantages of electronic sensors

Deposits and wear and tear often lead to failures in particular if mechanicalswitches are in contact with the medium. The electronic ifm sensors however cando without any mechanical components. This makes the sensors especially robustand reliable.

Another advantage of electronic sensors is the local indication of the level or theeasy setting of the switching threshold simply by pressing a button.

Measurement technique

For continuous level measurement the level is detected continuously, convertedinto an electrical signal and indicated. Depending on the type the units have freelyprogrammable switching outputs or an analogue output for further processing.

Continuous level sensors from ifm electronic use three different physical measuringprinciples:

For capacitive measurement the probe and the tank form an electrical capacitor.The capacity changes with the level and is converted into a level measurement by amicroprocessor.

For hydrostatic level measurement a measuring cell detects the hydrostatic pressureof the material. Here the pressure change is a measure for the level.

The efector gwr level sensor operates on the principle of guided wave radar.Electromagnetic pulses are transmitted by the sensor head and guided along theprobe. If the microwave pulse hits the medium to be detected, it is reflected andthe time of flight is evaluated by the sensor.

Measurement inthe medium:Probe sensors will bedirectly immersed inthe medium to bemonitored.

For special applica-tions: Capacitiveprobe sensor for

monitoring oils andcoolants.

Level sensors

218


Electronic level sensors for oils and coolants, approval to the German Federal Water Act (WHG), section 19 220

Electronic level sensors for oils and coolants 220 - 221

Variable level sensors, guided wave radar 221

Compact sensors for level and temperature monitoring 221 - 222

Compact sensors for level and leakage monitoring 222

Sensors for hydrostatic level monitoring 222

Point level sensors for oils and lubricants 222 - 223

Accessories for level sensors LK, LT, LL, LI 223 - 224

Accessories for level sensors LR 224 - 225

Accessories for level sensors PA, PG, PI, PN, PS, PY 225 - 226

Wiring diagrams 226


Level sensors

219

Electronic level sensors for oils and coolants, approval to the German Federal Water Act(WHG), section 19

Type Probe length

[mm]

Activezone

[mm]

Inactivezone

[mm]

Ub

[V]

Mediumtemperature

water[°C]

Mediumtemperature

oil[°C]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function 1 x normally open / closed programmable (OUT1) 1 x normally closed (OUT-OP, overflow output) · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8

264 195 53 / 15 12...30 0...35 0...65 200 1 LK1222

472 390 53 / 30 12...30 0...35 0...65 200 1 LK1223

728 585 102 / 40 12...30 0...35 0...65 200 1 LK1224

Electronic level sensors for oils and coolants

Type Probe length

[mm]

Activezone

[mm]

Inactivezone

[mm]

Ub

[V]

Mediumtemperature

water[°C]

Mediumtemperature

oil[°C]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector (according to EN 61076-2-101) · Output function 1 x analogue 4...20 mA / 0...10 V (OUT2); 1 x normally open / closed programmable (OUT-OP) · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8

264 195 53 / 15 18...300...35 (LK3122 +E43100: 0...65)

0...70 200 2 LK3122

472 390 53 / 30 18...300...35 (LK3123 +E43101: 0...60)

0...70 200 2 LK3123

728 585 102 / 40 18...300...35 (LK3124 +E43102: 0...55)

0...70 200 2 LK3124

M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 3 · Connector groups 7, 8

264 195 53 / 15 18...300...35 (LK1022 +E43100: 0...65)

0...70 200 2 LK1022

472 390 53 / 30 18...300...35 (LK1023 +E43101: 0...60)

0...70 200 2 LK1023

728 585 102 / 40 18...300...35 (LK1024 +E43102: 0...55)

0...70 200 2 LK1024

M12 connector (according to EN 61076-2-101) · Output function 3 x normally open / closed programmable (OUT1...OUT3); 1 x normally open / closed programmabl (OUT-OP) · DC PNP · Wiring diagram no. 4 · Connector group —

264 195 53 / 15 18...300...35 (LK8122 +E43100: 0...65)

0...70 200 2 LK8122

472 390 53 / 30 18...300...35 (LK8123 +E43101: 0...60)

0...70 200 2 LK8123

Level sensors


Type Probe length

[mm]

Activezone

[mm]

Inactivezone

[mm]

Ub

[V]

Mediumtemperature

water[°C]

Mediumtemperature

oil[°C]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector (according to EN 61076-2-101) · Output function 3 x normally open / closed programmable (OUT1...OUT3); 1 x normally open / closed programmabl (OUT-OP) · DC PNP · Wiring diagram no. 4 · Connector group —

728 585 102 / 40 18...300...35 (LK8124 +E43102: 0...55)

0...70 200 2 LK8124

Variable level sensors, guided wave radar

Type Processconnection

Probe length

[mm]

Activezone

[mm]

Inactive zone

[mm]

Ub

[V]

Mediumtemperature

[°C]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector (according to EN 61076-2-101) · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DCPNP · Wiring diagram no. 5 · Connector groups 7, 8

G¾ A 100...1600HIGH: L - 40;LOW: L - 60

HIGH: 30 / 10;LOW: 30 / 30

18...30 0...80 *** 200 3 LR3000

¾„NPT 150...1600 L - 50 40/10 18...30 0...80 200 4 LR3300

M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 3 · Connector groups 7, 8

G¾ A 100...1600HIGH: L - 40;LOW: L - 60

HIGH: 30 / 10;LOW: 30 / 30

18...30 0...80 *** 200 3 LR7000

¾"NPT 150...1600 L - 50 40/10 18...30 0...80 200 4 LR7300

M12 connector (according to EN 61076-2-101) · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 6 · Connector group —

G¾ A 100...1600HIGH: L - 40;LOW: L - 60

HIGH: 30 / 10;LOW: 30 / 30

18...30 0...80 *** 200 5 LR8000

¾"NPT 150...1600 L - 50 – 18...30 0...80 200 6 LR8300

Compact sensors for level and temperature monitoring

Type Probe length

[mm]

Activezone

[mm]

Inactivezone

[mm]

Ub

[V]

Mediumtemperature

water[°C]

Mediumtemperature

oil[°C]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable (level) 2 x normallyopen / closed programmable (temperature) · DC PNP · Wiring diagram no. 7 · Connector group —

264 195 53 / 15 18...30 – 0...70 200 7 LT8022

472 390 53 / 30 18...30 – 0...70 200 7 LT8023

Level sensors


Type Probe length

[mm]

Activezone

[mm]

Inactivezone

[mm]

Ub

[V]

Mediumtemperature

water[°C]

Mediumtemperature

oil[°C]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable (level) 2 x normallyopen / closed programmable (temperature) · DC PNP · Wiring diagram no. 7 · Connector group —

728 585 102 / 40 18...30 – 0...70 200 7 LT8024

Compact sensors for level and leakage monitoring

Type Probe length

[mm]

Activezone

[mm]

Inactivezone

[mm]

Ub

[V]

Mediumtemperature

water[°C]

Mediumtemperature

oil[°C]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector (according to EN 61076-2-101) · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 8 · Connector group —

264 195 53 / 15 18...300...35 (LL8022 +E43100: 0...65)

0...70 200 7 LL8022

472 390 53 / 30 18...300...35 (LL8023 +E43101: 0...60)

0...70 200 7 LL8023

728 585 102 / 40 18...300...35 (LL8024 +E43102: 0...55)

0...70 200 7 LL8024

Sensors for hydrostatic level monitoring


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

Output 4...20 mA analogue · Wiring diagram no. 9

– – 0...0.25 2 2.4 10...30 8 PS3208

– – 0...0.6 4 4.8 10...30 8 PS3407

Point level sensors for oils and lubricants

Type Probe length

[mm]

Output Ub

[V]

Mediumtemperature

water [°C]

Mediumtemperature

oil [°C]

Iload

[mA]

Draw-ingno.

Orderno.


132 normally closed 10...36 0...35 0...65 200 9 LI2141


Level sensors


Type Probe length

[mm]

Output Ub

[V]

Mediumtemperature

water [°C]

Mediumtemperature

oil [°C]

Iload

[mA]

Draw-ingno.

Orderno.




132normally open / closed

programmable10...36

0...35 (LI5141 +E43103: 0...65)

0...65 200 9 LI5141


programmable10...36

0...35 (LI5142 +E43100: 0...65)

0...65 200 9 LI5142


programmable10...36

0...35 (LI5143 +E43101: 0...60)

0...65 200 9 LI5143


programmable10...36

0...35 (LI5144 +E43102: 0...55)

0...65 200 9 LI5144

Accessories for level sensors LK, LT, LL, LI


Flange plate · 54-52X52 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: aluminium anodised / nut:stainless steel / Spacer: brass / rubber ring: FPM / sealing: Tesnit

E43007

Flange plate · 65-80 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: aluminium anodised / nut: stainlesssteel / Spacer: brass / rubber ring: FPM

E43006

Flange plate · 73-90 D16 · for capacitive level sensors LK, LI, LT, LL · according to DIN 24557 · Housing materials: aluminiumanodised / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: NBR

E43001

Mounting adapter · G ¾ D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: Tesnit

E43003

Mounting adapter · G ¾ D16 · for capacitive level sensors LI · Housing materials: brass nickel-plated / TPE / sealing: Viton E43019

Mounting adapter · G ¾ D22 · for climatic tube LK / LI · Housing materials: stainless steel / NBR / Tesnit / brass E43008

Mounting adapter · ¾" NPT D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM

E43012

Level sensors



Mounting adapter · G 1 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: Tesnit

E43004

Mounting adapter · G 1 D22 · for climatic tube LK / LI · Housing materials: stainless steel / NBR / Tesnit / brass E43009

Mounting adapter · 1" NPT D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM

E43013

Climatic tube · Length: 264 mm · for capacitive level sensors LK, LI · Housing materials: PPH / NBR E43100



Mounting clamp · Ø 16 mm · for capacitive level sensors LK, LI, LT, LL · Housing materials: PP E43000

Mounting set · Ø 16 mm · for capacitive level sensors LK, LI, LT, LL · Housing materials: PP / Metal parts: steel galvanised E43016

Protective cover · for LK / LL / LR / LT sensors · Housing materials: PP E43910

Accessories for level sensors LR


Flange plate · 65-80 / G ¾ · for level sensors LR · Housing materials: flange: stainless steel E43202

Flange plate · 73-90 / G ¾ · for level sensors LR · according to DIN 24557 · Housing materials: flange: stainless steel / sealing: NBR E43201

Flange plate · 73-90 / ¾" NPT · for level sensors LR · according to DIN 24557 · Housing materials: flange: stainless steel / sealing:NBR

E43206

Probe · Probe length: 240 mm · for level sensors LR · Housing materials: stainless steel E43203

Level sensors









Accessories for level sensors PA, PG, PI, PN, PS, PY


Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006

Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / Viton / ventilation strip: Teflon film 0.32 mm / O-ring: Viton

E30101

Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / EPDM / ventilation strip: Teflon film 0.32 mm / O-ring: EPDM

E30104

Adapter · G ¼ - G ½ · Housing materials: stainless steel / FPM E30000

Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007

Cable clamp fastener · for submersible pressure transmitter PS3 · Housing materials: steel / plastics E30399

Filter element · for submersible pressure transmitter PS3 · for fixing on the capillary tube E30400

Level sensors



Splitter box · with ventilation and terminal block · for submersible pressure transmitter PS3 · Housing materials: plastics E30401

Additional weight · for submersible pressure transmitter PS3 · Housing materials: stainless steel 316Ti / 1.4571 E30402

Core colours

BN brown

GY grey

WH white

Wiring diagrams

1

L

L+

3 BU

4 BK

2 WH

1 BN

Out-OPOut 1

2:4:

2

L+

L3 BU

4 BK

2 WH

1 BN

Out-OPOut 2

4:2:

3

2

L

L+

4

1

3Out 1Out 2

4:2:

4

Out-OP / Out 4

3

4

2

5

6

Out 1

Out 3

L+1

n.c.7

Out 2

L

5

L+

LOUT1OUT2

4:2:

4

2

1

3

6

L+

L

n.c.

Out 4

Out 1

Out 2

1

2

4

6

7

3

Out 35

7

Out 4

3

4

2

5

6

Out 1

Out 3

L+1

n.c.7

Out 2

L

8

Out-OP

3

4

2

5

6

Out 1

Out 3

L+1

n.c.7

Out 2

L

9

BN

GY

WH

L+

L

10

L+

L

1

4

3

Level sensors



1

I1L

16

50

518

AI2

1 2

3

30,5

64

M12

x1

1: 7-segment LED display, 2: Programming buttons, 3: Housing connection with cable lug for cable 1.5 - 2.5 mm²

2

30,5

64

M12

x1

4 3I1L

16

50

57A

I2

32

1

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4:Housing connection (flat-pin connector 6.3 mm following DIN 46244)

3

30

63

M12

x1

G 43

8 6

32

I1

L

50

57A

I2

32

1

7887

1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons, 4: sealing

4

I1

L

50

57A

I2

32

1

6787

30

63

M12

x1

"NPT8

43

6

32

1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons

5

30

63

M12

x1

G 43

8 6

32

I1

L

50

57A

I2

32

1

7887

1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons, 4: sealing

6

30

63

M12

x1

"NPT8

43

6

32

I1

L

50

57A

I2

32

1

6787

1: 4-digit alphanumeric display, 2: LEDs (display unit / switchingstatus), 3: Programming buttons

Level sensors

227


7

30,5

64

M12

x1

5

4 3I1L

16

50

57A

I2

32

1

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4: Housing connection (flat-pin connector 6.3 mm following DIN46244), 5: Position of the temperature measuring element

8

100

27

9

L

16

53

M12

x1

LED

21,3

1

16,6

A


Level sensors


Level sensors

229

For liquids and gases.

Special versions for food applications and hazardous areas.

Optional fittings for variable process connection.

Flow monitoring also for aggressive media.

Flow sensors

In almost all fields of process and plant engineering liquids or gases are used forcoolant and lubricant supply of machines and units, ventilation of installations andbuildings and the processing of products. In case of no flow of these mediaconsiderable damage and downtime may result. Thus it is very important to monitorthese media. In modern installations electronic flow monitors are used for thispurpose. They work without wear and tear and without mechanical components.This guarantees reliable monitoring even in case of difficult media over a longperiod.

Operating principle

Electronic flow sensors from ifm electronic operate with different measurementtechniques. They meet all requirements from a simple monitoring function to theexact detection of flow quantities.

Harmonised operating menus ensure that operators who use different flow sensorscan quickly and precisely carry out settings on the sensors. Some flow sensorsfeature an integrated temperature monitor which makes an additional measuringpoint unnecessary. This enables to control processes in the optimum operatingstatus especially with regard to energy savings.

Analogue, binary and pulse outputs offer various possibilities to process themeasured data. Due to the flexible programming by means of pushbuttons theflow sensors can be adapted to different conditions. The sensors are mounted viaadapters.

Monitoring very smallflow rates: Flow moni-tor with flow adapter.

Optimisedconsumption ofcompressed air.

Flow sensors

230


Magnetic-inductive flow sensors with integrated temperature measurement (sealing material FKM) 232

Magnetic-inductive flow sensors (sealing material FKM) 232

Compact housings for adapters for flow monitoring 233

Compact housings for adapters for flow monitoring, titanium sensor tip 233

Compact designs for adapter with flow and temperature monitoring 234

Compact housings for adapters with ATEX approval group II, category 3D / 3G 234

Mechatronic flow sensors for liquids 234

Flow sensors for connection to control monitors, industrial applications 235

Flow sensors for connection to control monitors, industrial applications, titanium housing 235

Control monitors for industrial applications 235 - 236

Flow sensors for connection to control monitors with ATEX approval 236

Control monitors with ATEX approval 237

Air flow monitors 237

Compressed air meters 237

Compressed air meter for special gases 238

Inline sensor for small dosing quantities of water and aqueous solutions 238

Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils) 238 - 239

Accessories for flow sensors and control monitors 239 - 240

Accessories for volumetric flow sensors 240 - 241

Grounding clamps for magnetic-inductive volumetric flow sensors 241



Flow sensors

231

Magnetic-inductive flow sensors with integrated temperature measurement (sealing materialFKM)


Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.

Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue(4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 7, 8

G½ 0.25...25.00 -10...70 16 < 0.150 19...30 1 SM6000

Output 2 x analogue (4...20 mA scalable) · Wiring diagram no. 2 · Connector groups 7, 8

G½ 0.1...25.00 -10...70 16 < 0.150 20...30 1 SM6004

Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 7, 8

G¾ 0.5...50.0 -10...70 16 < 0.150 19...30 2 SM7000


G¾ 0.2...50.0 -10...70 16 < 0.150 20...30 2 SM7004

Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 7, 8

G1 0.7...100.0 -10...70 16 < 0.150 19...30 3 SM8000


G1 0.2...100.0 -10...70 16 < 0.150 20...30 3 SM8004

Magnetic-inductive flow sensors (sealing material FKM)


Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.

M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 3 · Connector groups 7, 8

G½ 0...25 -10...70 16 < 0.150 19...30 4 SM6050

G¾ 0...50 -10...70 16 < 0.150 19...30 5 SM7050

G1 0...100 -10...70 16 < 0.150 19...30 6 SM8050

Flow sensors


Compact housings for adapters for flow monitoring

Type Setting rangeliquids / gases

[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.


3...300 / 200...3000 3...100 / 200...800 -25...80 30 1...10 19...36 7 SI5000


3...300 / 200...3000 3...100 / 200...800 -25...80 30 1...10 19...36 7 SI5001

M12 connector · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 6 · Connector groups 7, 8

3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 8 SI5002

M12 connector · Output function 2 x normally open / closed programmable · DC NPN · Wiring diagram no. 7 · Connector groups 7, 8

3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 8 SI5003


3...300 / - 3...100 -25...80 / - 300 1...10 19...36 8 SI5004


3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...2 / 1...10 19...36 8 SI5010


3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...2 / 1...10 19...36 8 SI5011

Compact housings for adapters for flow monitoring, titanium sensor tip


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.

M12 connector · Wiring diagram no. 8 · Connector groups 7, 8

3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...2 / 1...10 19...36 8 SI5100

Flow sensors


Compact designs for adapter with flow and temperature monitoring


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.


3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 8 SI5007

Compact housings for adapters with ATEX approval group II, category 3D / 3G


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.


3...300 / 200...3000 3...100 / 200...800 -25...80 30 1...10 19...36 7 SI500A

Mechatronic flow sensors for liquids


Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.


Rp ¾ 1...15 0...85 25 < 0.01 24 9 SBY332

Rp ½ 2...20 0...85 25 < 0.01 24 10 SBY323

Rp ¾ 1...25 0...85 25 < 0.01 24 9 SBY333

Rp ¾ 2...50 0...85 25 < 0.01 24 9 SBY334

Rp 1 5...100 0...85 25 < 0.01 24 11 SBY346

Rp 1½ 20...200 0...85 25 < 0.01 24 12 SBY357

Flow sensors


Flow sensors for connection to control monitors, industrial applications


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Responsetime[s]

Max. T0gradient[K/min]

Pressurerating[bar]

Draw-ingno.

Orderno.

M12 connector · Wiring diagram no. 11 · Connector group 10

3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 30 30 13 SF6200


3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 14 SF5200

3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 30 15 SF5201

Cable 6 m · Wiring diagram no. 12

3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 16 SF5350

3...300 / 200...3000 3...60 / 200...800 0...120 / 0...100 1...10 300 300 16 SF5300

Flow sensors for connection to control monitors, industrial applications, titanium housing


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Responsetime[s]


Pressurerating[bar]

Draw-ingno.

Orderno.


3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 14 SF5700

Control monitors for industrial applications

Type Ub /Tolerance

[V] / [%]

Currentconsumpt.

[mA]

Powerconsumpt.

[VA]

Power-ondelaytime[s]

Outputwhen flow is

present

Outputwhen

temperature is exceeded

Outputin case of

wire break

Draw-ingno.

Orderno.

Combicon connector · Wiring diagram no. 17

90...240 AC/ -5 /+10

– 4 10...80 relay energised relay energised relay de-energised 17 SN0150*

Flow sensors


Type Ub /Tolerance

[V] / [%]

Currentconsumpt.

[mA]

Powerconsumpt.

[VA]


Outputwhen flow is

present

Outputwhen


Outputin case of

wire break

Draw-ingno.

Orderno.


90...240 AC/ -5 /+10

– 4 10...80 relay energised – relay de-energised 17 SN0151*


24 DC / +10/ -20

90 – 10...80 relay energised relay energised relay de-energised 17 SR0150*


19...36 DC 70 – 10no / nc

programmable– – 18 SR5900


Miniature fuse to IEC60127-2 sheet 1, 1 =, Flow monitoring, 2 =, Wire break monitoring, 3 =, Temperature monitoring, 4 =, Power-on delay time, 5 =, Selection liquid / gas, ≤ 5 A (fast acting). Recommendation: check the unit for reliable functionafter a short circuit.

Flow sensors for connection to control monitors with ATEX approval


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Responsetime[s]


Pressurerating[bar]

Draw-ingno.

Orderno.


3...300 / 200...2000 3...60 / 200...800 -20...60 1...10 15 300 19 SF311A

3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 20 SF121A


3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 21 SF320A

Flow sensors


Control monitors with ATEX approval

Type Ub /Tolerance

[V] / [%]

Currentconsumpt.

[mA]

Powerconsumpt.

[VA]


Outputwhen flow is

present

Outputwhen


Outputin case of

wire break

Draw-ingno.

Orderno.

15 terminals...2.5 mm²

230 AC / ± 10

– 5 30 relay energised – relay de-energised 22 SN2301*

24 DC / ± 10

125 – 30 relay energised – relay de-energised 22 SR2301*


Miniature fuse to IEC60127-2 sheet 1, 1, Flow monitoring, 2, Wire break monitoring, ≤ 5 A (fast acting), Place the fuse outsidethe hazardous area. . Recommendation: check the unit for reliable function after a short circuit.

Air flow monitors


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Responsetime[s]

Ub / tolerance

[V] / [%]

Draw-ingno.

Orderno.


100...1000 100...400 -10...50 3...60 24 DC ± 25 % 23 SL5101

Compressed air meters


Setting range

[Nm3/h]

Accuracy withinmeasuring range

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.

Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA scaleable) · Wiring diagram no. 20 · Connector groups 7, 8

G¼ (DN8) 0.14...15.00A): ± (3% MW + 0.3%MEW) / B): ± (6% MW

+ 0.6% MEW) *16 < 0.1 19...30 24 SD5000

R½ (DN15) 0.7...75.0A): ± (3% MW + 0.3%MEW) / B): ± (6% MW

+ 0.6% MEW) *16 < 0.1 19...30 25 SD6000

R1 (DN25) 2.0...225.0A): ± (3% MW + 0.3%MEW) / B): ± (6% MW

+ 0.6% MEW) *16 < 0.1 19...30 26 SD8000

R1½ (DN40) 3.5...410.0A): ± (3% MW + 0.3%MEW) / B): ± (6% MW

+ 0.6% MEW) *16 < 0.1 19...30 27 SD9000

R2 (DN50) 6...700A): ± (3% MW + 0.3%MEW) / B): ± (6% MW

+ 0.6% MEW) *16 < 0.1 19...30 28 SD2000

Flow sensors


Compressed air meter for special gases


Setting range

[Nm3/h]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.

Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA scaleable) · Wiring diagram no. 20 · Connector groups 7, 8

G¼ (DN8)Ar: 0.08...24.54 / CO2: 0.047

(0.04)...14.38 / N2: 0.05(0.06)...14.94

0...60 16 < 0.1 19...30 24 SD5100

R½ (DN15)Ar: 0.39 (0.4)...118.2 / CO2:0.24 (0.2)...71.7 / N2: 0.24

(0.2)...73.0 0...60 16 < 0.1 19...30 25 SD6100

Inline sensor for small dosing quantities of water and aqueous solutions


Measuring range

[ml/min]

Display range

[ml/min]

Pressurerating[bar]

Mediumtemp.[°C]

Draw-ingno.

Orderno.


G1/8 1...200 0...240 10 0...60 29 SQ0500

Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils)


Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.

Output 2 x normally open / closed programmable · Wiring diagram no. 16 · Connector groups 7, 8

G¾ 0.1...50.0 -10...80 16 < 0.250 19...30 30 SU7200

G1 0.2...100.0 -10...80 16 < 0.250 19...30 31 SU8200

Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA/ 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 7, 8

G¾ 0.1...50.0 -10...80 16 < 0.250 19...30 30 SU7000

G1 0.2...100.0 -10...80 16 < 0.250 19...30 31 SU8000

G1¼ 0.4...200.0 -10...80 16 < 0.250 19...30 32 SU9000

Flow sensors



Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Draw-ingno.

Orderno.


G1¼ 0.0...200.0 -10...80 16 < 0.250 19...30 32 SU9004

Accessories for flow sensors and control monitors


Progressive ring T-piece DIN 2353 · QL 18-18-18 · for sensors and adapters with process connection M26 x 1.5 · Recommendation:precision steel pipes 18 x 1.5 to DIN 2391/ISO 3304 · Housing materials: stainless steel 316Ti / 1.4571

E40078

Progressive ring T-piece DIN 2353 · QL 22-18-22 · for sensors and adapters with process connection M26 x 1.5 · Recommendation:precision steel pipes 22 x 1.5 to DIN 2391/ISO 3304 · Housing materials: stainless steel 316Ti / 1.4571

E40079

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: titanium E40128

Adapter · M18 x 1.5 - L18 · for mounting in T-pieces · Insertion depth of the probe of SID, SFD, TN: · 28.5 mm · Housing materials:nut: stainless steel 316Ti / 1.4571 / adapter: stainless steel 316L / 1.4404 / O-ring: FPM 16 x 1.5 gr 70° Shore A

E40104

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404

E40101

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40100

Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404

E40099

Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40098

Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096

Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: brass E40097

Flow adapter (for low flow rates) · M12 x 1 - G 1/8 · for flow sensors and compact flow monitors with adapter · Housing materials:stainless steel 316L / 1.4404

E40129

Flow sensors



Flow adapter (for low flow rates) · M12 x 1 - G 1/8 · for flow sensors and compact flow monitors with adapter · Housing materials:titanium

E40130

Protective cover · for flow sensors type SI5xxx, SI6xxx, SR59xx · Housing materials: PP uncoloured E40203

Accessories for volumetric flow sensors


Adapter · G ½ - R ½ · R ½ · for flow monitor type SM6 · flat seal · Housing materials: stainless steel 316Ti / 1.4571 · Pack quantity: 2 E40199

Adapter · G ½ - G ¾ · G ½ · for flow monitor type SM6 · flat seal · Housing materials: high-grade stainless steel E40189

Adapter · G ¾ - R ½ · for flow monitor type SM7 / SU7 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40178

Adapter · G 1 - R ½ · for flow monitor type SM8 / SU8 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40179

Adapter · G 1 - R ¾ · for flow monitor type SM8 / SU8 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40180

Adapter · G ¾ I - R½ · for flow monitor type SM7 / SU7 · Housing materials: brass · Pack quantity: 2 E40151

Adapter · G 1 - R½ · for flow monitor type SM8 / SU8 · Housing materials: brass · Pack quantity: 2 E40152

Adapter · G 1 - R¾ · for flow monitor type SM8 / SU8 · Housing materials: brass · Pack quantity: 2 E40153

Adapter · G 1¼ - R 1 · for flow monitor type SU9 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40205

Adapter · G ½ - G ½ · for flow monitor type SM6 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40213

Adapter · G ¾ - G ½ · for flow monitor type SM7 / SU7 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40214

Flow sensors



Adapter · G 1 - G ¾ · for flow monitor type SM8 / SU8 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40215

Adapter · G ¾ - G ¾ · for flow monitor type SM7 / SU7 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40216

Adapter · G 1 - G 1 · for flow monitor type SM8 / SU8 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40217

Grounding clamps for magnetic-inductive volumetric flow sensors


Grounding clamp G½ · for flow monitor type SM6 · Housing materials: stainless steel E40196

Grounding clamp G ¾ · for flow monitor type SM7 · Housing materials: stainless steel E40197

Grounding clamp G 1 · for flow monitor type SM8 · Housing materials: stainless steel E40198

Core colours

BN brown

BU blue

BK black

WH white

GY grey

Wiring diagrams

1

4

1

3

2 OUT2/InD

L+

L

BN

BU

OUT1

WH

BK

2

L+

LOUT1OUT2

4:2:

4

2

1

3

3

L+

L3

2

4

1

n.c.

n.c. = not connected

4

L+

L

1

4

3

5

L+

L

1

4

3

6

L

L+

3

2

4

1

S2 S1

7

L

L+

3

2

4

1

S1 S2

8

P

L+1

4

3

2

L

P = programming wire (forremote adjustment)

9

P

L+1

4

3

2

L

P = programming wire (forremote adjustment)

10

3

L+

L

1

4

11

2 WH

1 BN

4 BK

3 BU

5 GY

Flow sensors

241

Wiring diagrams

12

BU

BK

BN

WH

GY

13

BN

WH

BK

BU

1

2

3

7

8

9

GY

VS2000 Exi

14

1

2

3

7

8

9

VS2000 Exi

1 BN

2 WH

4 BK

3 BU

5 GY

15

BN

WH

BU

BKL+

L

16

2

L

L+

4

1

3Out 1Out 2

4:2:

17

ACL

N

12

11

10

9

8

7

6

5

4

2

1

19

18

17

5

4

1

3

2

GY

BK

BN

BU

WH

20

21

22

23

24

1

2

35

4

1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas

18

ACL

N

12

11

10

9

8

7

6

5

4

2

1

19

18

17

5

4

1

3

2

GY

BK

BN

BU

WH

20

21

22

23

24

1

2

35

4

1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas,Note: miniature fuse to IEC60127-2 sheet 1,, ≤ 5 A (fast acting)

19

12

11

10

9

8

7

6

5

4

2

1

19

18

17

5

4

1

3

2

GY

BK

BN

BU

WH

20

21

22

23

24

1

2

35

4

DCL+L

1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas

20

L+

LOut 2Out 1

2:4: 3

4

2

1

L

L+

Out 2Out 1

2:4: 3

4

2

1

Flow sensors



1

11073

M12 x1

16

G G2

1

21

M12 x1

54

2

G4

3

G4

3

11073

M12 x1

19

M12 x1

54

3

G1

G1

11073

M12 x1

19

M12 x1

54

4

11073

M12 x1

16

G G2

1

21

M12 x1

54

5

G4

3

G4

3

11073

M12 x1

19

M12 x1

54

6

G1

G1

11073

M12 x1

19

M12 x1

54

7

22

1 2

3

113

60 65

14

7,7

45

50

27

63

M12

x1

1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm

8

22

1 2

113

60 65

14

8,2

45

50

27

63

M12

x1

3

1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm

9

113...123,576,5

32

97...

105,

5

1313

Rp

43

Rp

43

Flow sensors

243


10

96...

103

66,513 13

113...123,5

27

Rp

21

Rp

21

11

17 17

42

120...12991,5

106.

..112

Rp

1

Rp

1

12

56

137...146,5121,5

121.

..127

,5

Rp

12

1

Rp

12

1

20 20

13

7,745

15

M12

x1

217

10

2025 146

14

M12

x1

8272

22

14

8,2

44

19 1

1: internal thread M18 x 1.5

15

M12

x1

9282

22

14

7,7

55

19 1

8,2 15

internal thread M18 x 1.5

16

8672

22

14

8,2

44

19 1

1: internal thread M18 x 1.5

17

103,5

35,5

2510

0

2

1

LEDs

LEDs

1 2 3 4

5 6 7 8

9 10 11 12

21 22 23 24

17 18 19 20

1: Potentiometer (switch point flow), 2: Potentiometer (switch pointtemperature)

18

27

64

M12

x1

4

1 2

835248

50

19,7

3

1: LED display, 2: setting pushbutton, 3: connection for voltage sup-ply and output signals, 4: connection for flow sensor

Flow sensors



19

G2

1

124515

80

8,2

27

20

17

57

122713

M12

x1

7,7

21

M12

x1

124515

75

7,7

27

G2

1

22

45

78

1 2

19 20 21

13 14 15 16 17 18

3

97 8

+

120

35,5

1


23

140133

113

32

23

2 LED

pot.2 LED

24

182,3

21,3

M12

x1

100111

74,5

G1

4 /

45

1 2

G1

4 /

60 20

31

3

1: 4-digit alphanumeric display, 2: Programming buttons, 3: hole forM5 fixing screw

25

R210

30016

,1

21,3

M12

x1

100111

76,8

45

1 2


26

475375

27,3

33,7

R 1

M12

x1

100111

88,5

45

1 2


27

39

R11

2

275475

42

100111

M12

x1

120

45

1 2


Flow sensors

245


28

133

45

1 2

54

R2 51

100111

M12

x1

275475


29

114

4,5

37

10M

12x1

100

125

111117

56

45

G8

1

48

65

1: 4-digit alphanumeric display, 2: Programming buttons, 3: flowconditioner

30

G4

3

G4

3

11096

100

80,5

M12

x1

installation length with pipe adapter E40151 / E40154: 185 mm

31

80,5

M12

x1

G1

13096

100

G1

installation length with pipe adapter E40152 / E40155: 205 mm,installation length with pipe adapter E40153 / E40156: 215 mm

32

80,5

M12

x1

26

48

13096

100

G1

41

G1

41

Flow sensors


Flow sensors

247

Transmitters or sensors with integrated control monitor.

Units with special design for hygienic applications.

Measuring principles with overload protection and a good long-term stability.

Measuring range from -1…600 bar.

Variable process connection and sealing technology via adapter.

Pressure sensors

ifm offers a wide range of electronic pressure and vacuum sensors to meet therequirements of various industrial applications. The ceramic-capacitive measuringcell, tried and tested a million times, is complemented by a stainless steel measuringcell with thick-film wire strain gauges (series PK, PV, PT) and a piezoresistivemeasuring technique (for pneumatic applications).

All units have robust housings and do not require moving parts such as pistons orsprings. The result: the sensors are extremely shock and vibration resistant andoperate without any wear or maintenance.

The tried and tested ceramic-capacitive measuring principle is corrosion-resistantand long-term stable. In the long run this guarantees continuous accuracy of themeasured values. The sensors are resistant to dynamic pressure peaks andguarantee high overload resistance even in the case of extreme pressure peaksthat occur for example with fast closing valves.

Units with wire strain gauge in thick-film technology on a stainless steel measuringcell are distinguished by their very compact and robust design. They can be usedin almost all industrial areas. The welded stainless steel measuring cell withoutany seals ensures a high degree of safety, in particular for applications with gaspressures of up to 400 bar as well as in air-conditioning and refrigerating technol-ogy where aggressive coolants (freons) are used.

Local display:the clearly readableLED display showsthe current systempressure.

Separate display /programming unit

PP2001.

Pressure sensors

248


Sensors with switching outputs and analogue outputs and display 250 - 251

Sensors with switching outputs and display 251 - 253

PY sensors with CETOP flange and display 253

PK sensors with mechanical setting and switching outputs 253 - 255

PT sensors for industrial applications with analogue outputs 255 - 256

PP sensors for mobile applications with switching outputs, IO-Link 256 - 257

PT sensors for mobile applications with analogue outputs 257

PA / PPA sensors for industrial applications with analogue outputs / AS-i 258 - 259

Part seat monitoring 259

Sensors for hydrostatic level monitoring 259

PNI sensors with analogue input 259 - 260


Sensors for pneumatic applications 260

PI sensors for hygienic and wet areas with switching and analogue output 260

Electronic contact manometers for hygienic and wet areas with switching output and analogue output 261

PF sensors for hygienic and wet areas with switching and analogue output 261

PE sensors with display with 2 switching outputs or switching and analogue output 262

Fixing components for pressure sensors 262

Accessories and software 262 - 263

Adapters and accessories for adapters 263



Pressure sensors

249

Sensors with switching outputs and analogue outputs and display


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 11 · Connector groups 7, 8

G¼ I Display unit 0...400 600 1000 20...30 1 PN2020



G¼ I Display unit -1...25 100 350 20...30 2 PN2023


G¼ I Display unit -0.125...2.5 20 50 20...30 2 PN2026

G¼ I Display unit -0.05...1 10 30 20...30 2 PN2027


G¼ I Display unit -0.0125...0.25 10 30 20...30 2 PN2028

¼" NPT Display unit 0...400 600 1000 20...30 3 PN2220



¼" NPT Display unit -1...25 100 350 20...30 4 PN2223


¼" NPT Display unit -0.125...2.5 20 50 20...30 4 PN2226

Pressure sensors



Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


¼" NPT Display unit -0.05...1 10 30 20...30 4 PN2227

¼" NPT Display unit -0.0125...0.25 10 30 20...30 4 PN2228

M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · Wiring diagram no. 1 · Connectorgroups 7, 8







G¼ I Display unit 0...2.5 20 50 18...36 6 PN3006



Sensors with switching outputs and display


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.




Pressure sensors



Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.







M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x nor-mally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 12 · Connector groups 7, 8












Pressure sensors



Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 12 · Connector groups 7, 8




¼" NPT Display unit 0...2.5 20 50 18...36 8 PN7206


PY sensors with CETOP flange and display


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


G¼ I / M6 Display unit 0...400 450 1000 18...36 9 PY7000




PK sensors with mechanical setting and switching outputs


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


G¼ A / M5 I Operation 0...400 600 1600 9.6...32 11 PK5520


Pressure sensors



Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.





M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 3 · Connector groups 7, 8







G¼ A / M5 I Switching status 0...400 600 1600 9.6...32 11 PK7520





R¼ A / M5 I Operation 0...400 600 1600 9.6...32 12 PK6730


Pressure sensors



Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.




M12 connector · Output function normally open / closed complementary · DC NPN · Wiring diagram no. 5 · Connector groups 7, 8





PT sensors for industrial applications with analogue outputs


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


G¼ A – 0...400 600 1600 8.5...36 13 PT3540

G¼ A – 0...250 400 1000 8.5...36 13 PT3541

G¼ A – 0...100 200 1000 8.5...36 13 PT3542

G¼ A – 0...25 60 600 8.5...36 13 PT3543

G¼ A – 0...10 25 300 8.5...36 13 PT3544

M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector groups 7, 8

G¼ A – 0...400 600 1600 16...36 13 PT9540

Pressure sensors



Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


G¼ A – 0...250 400 1000 16...36 13 PT9541

G¼ A – 0...100 200 1000 16...36 13 PT9542

G¼ A – 0...25 60 600 16...36 13 PT9543

G¼ A – 0...10 25 300 16...36 13 PT9544

PP sensors for mobile applications with switching outputs, IO-Link


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP · Wiring diagram no. 8 · Connector groups 7, 8

G¼ A / M5 I Operation 0...400 600 1000 9.6...36 14 PP7550




G¼ A / M5 I Operation -1...10 75 150 9.6...36 14 PP7554

G¼ A / M5 I Operation 0...2.5 20 50 9.6...36 14 PP7556

M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC NPN · Wiring diagram no. 8 · Connector groups 7, 8




Pressure sensors



Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC NPN · Wiring diagram no. 8 · Connector groups 7, 8


G¼ A / M5 I Operation -1...10 75 150 9.6...36 14 PP0524

PT sensors for mobile applications with analogue outputs


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 6 · Connector group —

G¼ A – 0...400 600 1600 8.5...36 13 PT3550

G¼ A – 0...250 400 1000 8.5...36 13 PT3551

G¼ A – 0...100 200 1000 8.5...36 13 PT3552

G¼ A – 0...25 60 600 8.5...36 13 PT3553

G¼ A – 0...10 25 300 8.5...36 13 PT3554

M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector group —

G¼ A – 0...400 600 1600 16...36 13 PT9550

G¼ A – 0...250 400 1000 16...36 13 PT9551

G¼ A – 0...100 200 1000 16...36 13 PT9552

G¼ A – 0...25 60 600 16...36 13 PT9553

G¼ A – 0...10 25 300 16...36 13 PT9554

Pressure sensors


PA / PPA sensors for industrial applications with analogue outputs / AS-i


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


G¼ I – 0...600 800 1200 9.6...32 15 PA3060

G¼ I – 0...400 600 1000 9.6...32 16 PA3020

G¼ I – 0...250 400 850 9.6...32 16 PA3021

G¼ I – 0...100 300 650 9.6...32 17 PA3022

G¼ I – 0...25 150 350 9.6...32 17 PA3023

G¼ I – 0...10 75 150 9.6...32 17 PA3024

G¼ I – 0...2.5 20 50 9.6...32 17 PA3026

G¼ I – 0...1 10 30 9.6...32 17 PA3027

G¼ I – -1...0 10 30 9.6...32 17 PA3029


G¼ I – 0...600 800 1200 16...32 15 PA9060

G¼ I – 0...400 600 1000 16...32 15 PA9020

G¼ I – 0...250 400 850 16...32 17 PA9021

G¼ I – 0...100 300 650 16...32 17 PA9022

G¼ I – 0...25 150 350 16...32 17 PA9023

G¼ I – 0...10 75 150 16...32 17 PA9024

Pressure sensors



Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


G¼ I – 0...2.5 20 50 16...32 17 PA9026

G¼ I – 0...1 10 30 16...32 17 PA9027

G¼ I – 0...0.25 10 30 16...32 17 PA9028

G¼ I – -1...0 10 30 16...32 17 PA9029

Part seat monitoring


Control unit for part seat monitoring · Setting by adjustment of the pneumatic bridge · Integrated pressure sensor with 2 switchingoutputs · and 4-digit alphanumerical display for trend display or display of current pressure · Cable

PS7570

Sensors for hydrostatic level monitoring

Type Measuringrange[bar]

Cable length /material

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

Output 4...20 mA analogue · Wiring diagram no. 9

0...0.253 m

PUR cable2 2.4 10...30 18 PS3208

0...0.610 m

PUR cable4 4.8 10...30 18 PS3407

PNI sensors with analogue input


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 10 · Connectorgroup —

G¼ I Display unit 0...250 400 850 18...30 6 PNI021


Pressure sensors



Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.






Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DC PNP · Wiring diagram no. 1 ·Connector group —

G¼ I Display unit -1...0 10 30 18...36 19 PN009A

Sensors for pneumatic applications


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


G 1/8 I Display unit -1...1 20 30 18...36 20 PN7809

G 1/8 I Display unit -1...10 20 30 18...36 20 PN7834

M8 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP · Wiring diagram no. 4 · Connector groups 4, 5, 6

G 1/8 I Display unit -1...1 20 30 18...32 21 PQ7809

G 1/8 I Display unit -1...10 20 30 18...32 21 PQ7834

PI sensors for hygienic and wet areas with switching and analogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · DC PNP/NPN ·Wiring diagram no. 13 · Connector groups 7, 8

G ¾ A Display unit -1...4 30 100 18...32 22 PI2995

Pressure sensors


Electronic contact manometers for hygienic and wet areas with switching output andanalogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DCPNP/NPN · Wiring diagram no. 13 · Connector groups 7, 8

Aseptoflex Vario Display unit -1...25 100 350 18...32 23 PG2793



PF sensors for hygienic and wet areas with switching and analogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


G1 A Switching status -1...100 200 650 20...30 24 PF2652

G1 A Switching status -1...25 100 350 20...30 25 PF2653

G1 A Switching status -0.5...10 50 150 20...30 25 PF2654

G1 A Switching status -0.13...2.5 20 50 20...30 25 PF2656


G1 A Switching status -0.013...0.25 10 30 20...30 25 PF2658


Pressure sensors


PE sensors with display with 2 switching outputs or switching and analogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.


G¼ I Display unit 0...10 75 150 18...36 6 PE7004

G¼ I Display unit 0...25 150 350 18...36 6 PE7003

Fixing components for pressure sensors



Mounting device 2 way · for fluid sensors · Housing materials: POM E30078

Accessories and software



Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / Viton / ventilation strip: Teflon film 0.32 mm / O-ring: Viton

E30101

Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / EPDM / ventilation strip: Teflon film 0.32 mm / O-ring: EPDM

E30104

Programming/ display unit · for EPS and IO-Link sensors · Connector · Housing materials: stainless steel 316L / 1.4404 / EPDM/X / PC copolymer / PBT / FPM

PP2001

Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK ·Housing materials: PP transparent

E30094

IO-Link interface · for parameter setting and analysis of units with DTM specification · Supported communication protocols: IO-Link(4800 and 38400 bits/s) EPS protocol (19200 bits/s) · contains ifm Container software (E30110)

E30396

Pressure sensors



Cable clamp fastener · for submersible pressure transmitter PS3 · Housing materials: steel / plastics E30399

Filter element · for submersible pressure transmitter PS3 · for fixing on the capillary tube E30400

Splitter box · with ventilation and terminal block · for submersible pressure transmitter PS3 · Housing materials: plastics E30401

Additional weight · for submersible pressure transmitter PS3 · Housing materials: stainless steel 316Ti / 1.4571 E30402

DIN rail clip · Housing materials: stainless steel E37340

Adapters and accessories for adapters


Adapter · R1/8 - R1/8 · rotatable · Housing materials: brass nickel-plated E37350

T pipe mounting set · G1/2 · with reducer G1/2 - G1/8, adapter R1/8 - R1/8 rotatable, seal G1/2 · Housing materials: brass nickel-plated

E37360

Flange adapter · G ¼ · Hole spacing · 31.1 mm · Housing materials: sealing: NBR, acrylonitrile-butadiene-rubber / flange: aluminium / hollow screw: brass

E30003

Adapter · G ¼ - G ½ · Housing materials: stainless steel / FPM E30000

Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007

Core colours

BN brown

GY grey

WH white

Wiring diagrams

1

L+

L3 BU

4 BK

2 WH

1 BN

2

L+

L

1

4

3

3

4

L

L+1

2

32:4:

Pressure sensors

263

Wiring diagrams

4

2

L

L+

4

1

3Out 1Out 2

4:2:

5

L

L+

4:32:

4

2

1

6

L+

L

1

2

7

L+

L

1

3

2

8

4

1

3

2OUT2

L+

L

OUT1/Teach/Data

9

BN

GY

WH

L+

L

10

L+

L

Uref

Out 1

Out 2

In

In+

1

2

3

5

6

7

4

OU2

OU1

+InP2

10 V

11

4

L

L+

2

1

3Out 1Out 2

4:2:

4

L

L+

2

1

3Out 1Out 2

4:2:

4

1

3

2L+

LOut 1Out 2

4:2:

2

1

3

4L+

LOut 1Out 2

4:2:

12

Out 1Out 2

4

L

L+

2

1

34:2:

4

L

L+

2

1

3Out 1Out 2

4:2:

13

4

1

3

2L+

L

2

1

3

4L+

L


1

30

47,8

59,6

G

M12

x1

16,5

1 4/

94,1

34

27

1,3

21,5

2 3

1

1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button

2

91,5

34

27

1,3

21,5

2 3

1

30

47

57,3

G

M12

x1

14

1 4/


Pressure sensors



3

94,1

34

27

2 3

1

30

47,8

59,8

"NPT

M12

x1

14

1 4/


4

91,5

34

27

2 3

1

30

47

57,3

M12

x1

12

"NPT1 4/


5

30

48

59,6

G

M12

x1

16,5

1 4/

94,1

34

27

1,3

21,5

2 3

1


6

91,5

34

27

1,3

21,5

2 3

1

30

48

57,3

G

M12

x1

14

1 4/


7

30

48

59,8

M12

x1

12

''NPT1 4/

94

34

27

2 3

1


8

91,5

34

27

2 3

1

30

48

57,3

M12

x1

12

''NPT1 4/


Pressure sensors

265


9

24,3

94

34

32

1

4030

17,5

12

5,5

4031,1

5,5

29

6,6

4031,1

2948

59,6

M12

x1

G 41

21,5

40

10,5

M6

M6

1,3

1,3 1,3


10

4031,1

5,5

29

6,6

4031,1

29

22,1

94

34

32

1

4030

15,3

12

5,5

G 41

21,5

40

10,5

M6

M6

1,3

1,3 1,3

10,5

48

59,6

M12

x1


11

61,6

12

M12 x127

27

71,6

G1 4/

M5

7,5

2

1

1: tightening torque 25 Nm, 2: sealing FPM / DIN 3869-14

12

60,6

13

R 41

M12 x127

27

70,6

M5

7,5

1

1: tightening torque 25 Nm

13

22

1

51,2

12

G1 4/

65,1

M12 x122

1: sealing FPM / DIN 3869-14, tightening torque 25 Nm

14

79,5

M12 x130

30

12

G14/

M5

1

LED

65,5

1: sealing FPM / DIN 3869-14

15

77,5

M12 x130

30

27

1,3

21,5

16,5

G 41

Pressure sensors



16

75

M12 x130

30

27

1,3

21,5

14

G 41

1: Pressure relief mechanism, No mechanical force must be exertedon the pressure relief mechanism.

17

75

M12 x130

30

27

1,3

21,5

14

G 41

18

100

27

19

94

36

27

21,5

2 3

1

30

49

57,3

G

M12

x1

14

1 4/

1,3

1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming button

20

1

2

10

178

20

34

34

35,620

15

4,5

5

6 86,6

52,3

M12

x1

3548,4

7 M4

28,5

28,5

1: ventilation connection M5; max. tightening torque 2.5 Nm, 2: main pressure connection G 1/8; tightening torque max. 8 Nm, 3: Programming button, 4: LEDs (display unit / switching status), 5: 4-digit alphanumeric display, 6: for mounting screw M4; max.tightening torque 2.5 Nm, 7: for mounting screw M4; max. tightening torque 2.5 Nm

21

4,2

354,75

3220

4232

30

20,7

11,3

1: main pressure connection G 1/8; tightening torque max. 8 Nm,thread length max: 7.5 mm, 2: for mounting screw M4; max. tightening torque 2.5 Nm, 3: LEDs (display unit / switching status), 4: 4-digit alphanumeric display, 5: Programming button

Pressure sensors

267


22

47

85M

12x1

36

119

34

2 348

20,6

1

G 43


23

24

3

153

16,8

100

2

1

57

60,5

M12

x1

G1

1: Analogue display, 2: 4-digit alphanumeric display, 3: Programmingbutton

24

46,5

58M

12x1

41 20°

92

34

M12 x1

27,5

G125,4

1 2

1: 7-segment LED display, 2: Programming button

25

97,4

34

27,5

G125,4

48,5

1 2

46,5

63,1

M12

x1

41 20°

1: 7-segment LED display, 2: Programming button

Pressure sensors


Pressure sensors

269

Increased process safety due to self-monitoring.

Integrated or separate control monitors selectable.

Modular concept –tailor-made for every application.

Optional fittings for variable connection.

Robust construction for high resistanceto shock and vibration.

Temperature sensors

The temperature sensors of ifm electronic are based on a PT100 or PT1000 resistor.The measured temperature value corresponds to a change in resistance and is con-verted into an electrical analogue signal. A microprocessor controls the evaluationof the electrical signal. The current system temperature is indicated by LEDs directlyon the control monitor.

The microprocessor and the display make process adjustment much easier. The usercan set the values for the switch points, hysteresis and measuring range by meansof programming buttons even without the system temperature being applied. Thisenables installation and setup of the system within a few minutes. The values aresafely stored in an EEPROM independent of the supply voltage.

Film technology is used for the electronic circuitry. A flexible, temperature-resistantand extremely resistant polyimide film is used as carrier of the SMD components.Together with a special potting method an extreme shock and vibration resistance isachieved.

From sensor to system

A complete temperature measurement system usually consists of severalcomponents. The temperature in a medium is detected by a sensor and is convertedinto an electrical measured signal. The mechanical design and the dimensions ofthe sensors must vary to enable use for different media and measuring points.Depending on the application ifm electronic offers a selection of robust probe sen-sors or types with connection cables. To indicate and process the measured valuethe sensor is connected to a separate control monitor. It indicates the measuredvalue on its integrated display. To complete the modular systems ifm electronicoffers compact temperature sensors with integrated control monitors. If a local tem-perature display is not required, temperature transmitters are frequently used.ifm electronic provides units with excellent response time (TA series) that eitherhave standard output signals or an integrated AS-i interface. In hygienic applicationsthe self-monitoring, calibration-free temperature transmitter TAD is an excellentchoice.

Local display of thecurrent temperature.

Imperative: tempera-ture monitoring in air

conditioning.

Temperature sensors

270


Compact temperature sensors 272

Compact temperature sensors with display, IO-Link 272

Control monitors for temperature sensors 272

Control monitors for temperature sensors, IO-Link 273

Modular temperature transmitters 273

Pt1000 probe sensors for standard applications 273 - 274

Pt100 probe sensors for standard applications 274

Cable sensors for standard applications 275

Cable sensors with bolt-on sensor for standard applications 276

Temperature transmitters for standard applications 276

Cable sensors for hygienic and wet areas 276

Temperature transmitters for hygienic and wet areas 277

Accessories for temperature sensors TN / TR 277

Accessories and software 277

Thermowells for temperature sensors 277 - 278

Adapters 278 - 279



Temperature sensors

271

Compact temperature sensors

Type Measuringrange[°C]

Processconnection

Probe length

[mm]

Ub

[V]

Dynamic responseT05 / T09

[s]

Drawingno.

Orderno.


-25...140 G¼ A 39 9.6...32 1 / 3 1 TK6130

-25...140 ¼„ NPT 39 9.6...32 1 / 3 2 TK6330


-25...140 G¼ A 39 9.6...32 1 / 3 1 TK7130

-25...140 ¼„ NPT 39 9.6...32 1 / 3 2 TK7330

M12 connector · Output function 1 x normally open / 1 x normally closed · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8

-25...140 G½ A 267 9.6...32 1 / 3 3 TK7480

Compact temperature sensors with display, IO-Link


Processconnection

Probe length

[mm]

Ub

[V]


[s]

Drawingno.

Orderno.

M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DCPNP/NPN · Wiring diagram no. 4 · Connector groups 7, 8

-40...150 M18 x 1.5 45 18...32 1 / 3 4 TN2531

M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 5 · Connectorgroups 7, 8

-40...150 M18 x 1.5 45 18...32 1 / 3 4 TN7531

Control monitors for temperature sensors


Processconnection

Display

LED

Ub

[V]

Currentconsump.

[mA]

Iload

[mA]

Drawingno.

Orderno.

M12 connector · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 6 · Connector group —

-40...150 G½ A Display unit 18...28 90 < 500 5 TR8430

Temperature sensors


Control monitors for temperature sensors, IO-Link


Processconnection

Display

LED

Ub

[V]

Currentconsump.

[mA]

Iload

[mA]

Drawingno.

Orderno.

M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DCPNP/NPN · Wiring diagram no. 7 · Connector groups 7, 8

-40...300 G½ A Display unit 18...32 50 250 6 TR2432


-40...300 G½ A Display unit 18...32 50 250 6 TR7432

Modular temperature transmitters

Type Measuringrange

[°C]

Processconnection

Ub

[V]

Ambienttemperature

[°C]

Measuring element Drawingno.

Orderno.


-50...300 M12 20...32 -25...70for Pt100 and Pt1000 measuring

elements7 TP3232

0...100 M12 20...32 -25...70for Pt100 and Pt1000 measuring

elements7 TP3237

-50...150 M12 20...32 -25...70for Pt100 and Pt1000 measuring

elements7 TP3231

-18...148.9 M12 20...32 -25...70for Pt100 and Pt1000 measuring

elements7 TP3233

Pt1000 probe sensors for standard applications


Diameter

[mm]

Probe length

[mm]

Sensorelement


[s]

Drawingno.

Orderno.

M12 connector · high-grade stainless steel · Wiring diagram no. 3

-40...150 6 160 1 x Pt 1000 1 / 3 8 TT1250

-40...150 8 160 1 x Pt 1000 1 / 3 9 TT1150

-40...150 8 360 1 x Pt 1000 1 / 3 9 TT3150

Temperature sensors



Diameter

[mm]

Probe length

[mm]

Sensorelement


[s]

Drawingno.

Orderno.

M12 connector · high-grade stainless steel · Wiring diagram no. 3

-40...150 10 160 1 x Pt 1000 1 / 3 10 TT1050

-40...150 10 260 1 x Pt 1000 1 / 3 10 TT2050

-40...150 10 360 1 x Pt 1000 1 / 3 10 TT3050

-40...150 10 560 1 x Pt 1000 1 / 3 10 TT5050

Pt100 probe sensors for standard applications


Diameter

[mm]

Probe length

[mm]

Sensorelement


[s]

Drawingno.

Orderno.

M12 connector · high-grade stainless steel · Connector groups 7, 8

-40...150 8 160 1 x Pt 100 1 / 3 9 TT1181

-40...150 8 260 1 x Pt 100 1 / 3 9 TT2181

-40...150 8 360 1 x Pt 100 1 / 3 9 TT3181

-40...150 10 160 1 x Pt 100 1 / 3 10 TT1081

-40...150 10 260 1 x Pt 100 1 / 3 10 TT2081

-40...150 10 360 1 x Pt 100 1 / 3 10 TT3081

-40...150 10 560 1 x Pt 100 1 / 3 10 TT5081

Temperature sensors


Cable sensors for standard applications


Diameter

[mm]

Cablematerial

Sensorelement


[s]

Drawingno.

Orderno.

Cable 4 m · high-grade stainless steel

-30...180 M5 / L = 25.7 silicone cable 1 x Pt 100 3 / 8 11 TS4759

Cable with connector 2 m · high-grade stainless steel · Connector groups 7, 8

-40...150 Ø 6 / L = 45 FPM (Viton) cable 1 x Pt 1000 3 / 10 12 TS2251



-50...250 Ø 6 / L = 50 PTFE cable 1 x Pt 100 11 / 37 15 TS2256


-30...180 – silicone cable 1 x Pt 100 3 / 8 17 TS2759

-30...180 M6 / L = 25.7 silicone cable 1 x Pt 100 3 / 8 18 TS2659

Cable with connector 2.5 m · high-grade stainless steel · Connector groups 7, 8






-30...180 – silicone cable 1 x Pt 100 3 / 8 17 TS0759

Temperature sensors


Cable sensors with bolt-on sensor for standard applications


Diameter

[mm]

Cablematerial

Sensorelement


[s]

Drawingno.

Orderno.

Cable with connector 2 m · stainless steel · Connector groups 7, 8

-25...90 M6 / 12 x 51 PUR cable 1 x Pt 100 9 / 15 20 TS2229

Temperature transmitters for standard applications


Processconnection

Probe length

[mm]

Ub

[V]


[s]

Drawingno.

Orderno.

M12 connector · high-grade stainless steel · DC · Connector groups 7, 8

-50...150 G¼ A 60 10...30 1 / 3 21 TA3131

0...140 G¼ A 60 10...30 1 / 3 21 TA3130

-50...150 G¼ A 200 10...30 1 / 3 22 TA3171

-17.8...148.9 ¼„ NPT 47 10...30 1 / 3 23 TA3333

0...100 ¼„ NPT 47 10...30 1 / 3 23 TA3337

Cable sensors for hygienic and wet areas


Diameter

[mm]

Cablematerial

Sensorelement


[s]

Drawingno.

Orderno.







Temperature sensors


Temperature transmitters for hygienic and wet areas


Processconnection

Probe length

[mm]

Ub

[V]


[s]

Drawingno.

Orderno.

M12 connector · high-grade stainless steel · DC · Connector groups 7, 8

0...140 G½ A 87.5 10...30 1 / 3 24 TA3430

0...100 Ø 6 mm 123 10...30 1 / 3 25 TA3237

-10...150 Ø 6 mm 123 10...30 1.2 / 3.5 25 TA3231

Accessories for temperature sensors TN / TR



Mounting device 2 way · for fluid sensors · Housing materials: POM E30078


Accessories and software


IO-Link interface · for parameter setting and analysis of units with DTM specification · Supported communication protocols: IO-Link(4800 and 38400 bits/s) EPS protocol (19200 bits/s) · contains ifm Container software (E30110)

E30396

Thermowells for temperature sensors


Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 82 mm · Housing materials: stainless steel 316L / 1.4404 E35010


Temperature sensors





Thermowell for temperature sensors · Ø 6 mm - G ½ · Probe length: 82 mm · Housing materials: stainless steel 316Ti / 1.4571 E37010

Adapters


Mounting set · for direct connection of temperature sensors TT to control monitors TR · Housing materials: stainless steel E30017

Clamp fitting · Ø 6/8/10 mm - G ½ · for temperature sensors TS / TT · Housing materials: stainless steel / FPM E30018

Progressive ring fitting for temperature sensors · Ø 10 mm - G ½ · Housing materials: stainless steel 316Ti / 1.4571 E30016

Progressive ring fitting for temperature sensors · Ø 10 mm - ½„ NPT · Housing materials: stainless steel 316Ti / 1.4571 E30024

Progressive ring fitting for temperature sensors · Ø 8 mm - G ½ · Housing materials: stainless steel 316Ti / 1.4571 E30046

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: titanium E40128

Adapter · M18 x 1.5 - L18 · for mounting in T-pieces · Insertion depth of the probe of SID, SFD, TN: · 28.5 mm · Housing materials:nut: stainless steel 316Ti / 1.4571 / adapter: stainless steel 316L / 1.4404 / O-ring: FPM 16 x 1.5 gr 70° Shore A

E40104

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404

E40101

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40100

Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404

E40099

Temperature sensors



Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40098

Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096

Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: brass E40097

Adapter · M18 x 1.5 - ½„ NPT · Insertion depth of the probe of SID, SFD, TN: · 23 mm · Housing materials: stainless steel 316L /1.4404

E40107


E30094

Wiring diagrams

1

4

L

L+1

2

32:4:

2

2

L

L+

4

1

3Out 1Out 2

4:2:

3

1

2

3

4

4

4

1

3

2L+

L

2

1

3

4L+

L

5

Out 1Out 2

4

L

L+

2

1

34:2:

4

L

L+

2

1

3Out 1Out 2

4:2:

6

TR 8430

L+

L

n.c.

Out 4

Out 1

Out 2

1

2

4

6

7

3

Out 35

3 (n.c.)

1 (n.c.)

4

2

7

L+

L

1 BN

2 WH

4 BK

3 BUTR 2432

1

2

3

4

2

B

1

2

3

4

3

1

1

2

3

4

B

B

1: Two-wire sensor, 2: Three-wire sensor, 3: Four-wire sensor, B: link

Temperature sensors

279

Wiring diagrams

8

L+

L

1 BN

2 WH

4 BK

3 BU

1

2

3

4

2

B

1

2

3

4

3

1

1

2

3

4

B

B

TR

1: Two-wire sensor, 2: Three-wire sensor, 3: Four-wire sensor,B: link

9

4

1

3

2

L+

L

L

IO-Link1

2

3

4

1

2

3

4

1

2

3

4

B

B

TP

1: Two-wire sensor, 2: Four-wire sensor, 3: Operation as 2-wiretemperature transmitter, 4: Operation as 3-wire unit, IO-Linkcommunication possible, B: link


1

39

M12 x127

27

96,5

25

8,2

G 41

87

2

48

M12 x127

27

105,

5

35

8,2

-18 NPT41

96

3

267

M12 x127

2732

7

G 21

8

255

4

4514

128

34

8,2

2 3

1

48

94,5

M12

x1

22 4

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: internal thread M18 x 1.5

Temperature sensors



5

93

3416

,5

G 21

2 3

1

30

48

60M

12x1

4

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: connection for temperature sensor

6

93

34

16,5

G 21

2 3

1

30

48

60M

12x1

4

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: connection for temperature sensor

7

18M12x1

M12x1

25

LED

22 52

2

1: connection for voltage supply and output signals, 2: connectionfor temperature sensor

8

18,5

L

5,95

M12

x1

21,5

40

1

6,2 13,8

6

1: plug area

9

18,5

L

7,95

M12

x1

21,5

40

1

6,2 26

8

1: plug area

10

8

L

10

M12

x1

21,5

18,5

40

1

1: plug area

11

80 ± 525,7

5,4

M54

8

8

12

M12

x1

64572

48

13

M12

x1

8

507248 8

14

M12

x1

7248

50

12

107

42

15

M12

x1

42,5 50 6

Temperature sensors

281


16

50

12

107

42

M12

x1

42,5

17

M12

x1

5825,7

5,4

M54

8

8

1: tightening torque 1.5 Nm

18

M12

x1

5825,7

2,5

M65

8

13 6,5

19

M12

x1

7248

45 6

20

M12

x1

49,5

14 35

6,5

51

12

17

8,7

1,8

21

4460

8,2

M12x130

27

13,7

117,

7

13,5

G 41

22

4420

0

8

M12x130

27

13,7

257,

7

13,5

G 41

23

4460

8,2

M12x130

27

13,7

117,

7

13,5

-18 NPT41

24

G 21

43,8 123

8,2

10

M12

x130

27

18,3

13,7

47,5

180,5

LED

87,5

25

34 123

6

M12

x130

14171

Temperature sensors


Temperature sensors

283

Online vibration diagnosis – optimumprice / performance ratio.

Decentralised monitoring of plant and equipment integrated into the machine.

Compact field units and modular control cabinet units.

Digital and analogue alarm outputs.

Standard data interface (OPC).

Diagnostic systems

efector octavis is a vibration monitor which not only detects vibration data, but alsocarries out signal analysis and machine diagnosis directly on the machine. Themachine condition is determined and is forwarded to the PLC or to SCADAsoftware. It fulfils the main requirements for modern machine monitoring: compati-bility, modularity and transferable configuration.

Compatible and modular

The compatibility with data structures such as the OPC interface makes it possibleto integrate condition data into a higher-level system. With the requirement formodularity the user can define the extent of condition monitoring to be implemen-ted – this means the complete range of diagnosis is possible right from the “firstunit”. Transferable configuration is attained with application-related parameter sets.A wizard function in the software guides the user through creating, managing andarchiving the monitoring parameters.

Trend memory

All units of the octavis family type VE / VSE feature an internal trend memory whichensures detailed analysis and optimisation of the application even without externaldata recording. The storage intervals are freely selectable. This means that thestorage length of the non volatile ring buffer is adjusted to the requirements.

The suitable system for your application:

– Standard vibration characteristic values / permanent machine protection: VSE, VE, VK, VT

– Internal trend memory / root cause analysis: VSE, VE

– Online diagnosis / early damage detection: VSE (VE partly)

– Network capability of the system: VSE (VE partly*)

– Load meter: VSE

*Profibus DP gateway

Internal trend memory(type VE / VSE) of allmonitored diagnosisfactors can be evalu-ated via PC software.

Easy vibrationmonitoring: Type VK

provides a com-bination of switching

output and trans-mitter function in

conjunction with thetried and tested

easy-turn concept.

Diagnostic systems

284


Compact vibration diagnostic units with g-monitor to ISO 10816 type VB/VE 286

Software VB / VE 286

Accessories VB / VE 286

Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK 287

Accessories VK 287

Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE 287

Accessories VSE 287

Connection cables VSE 287

Vibration sensors for connection to external diagnostic electronics VSE - type VSA 288


Diagnostic systems

285

Compact vibration diagnostic units with g-monitor to ISO 10816 type VB/VE


Orderno.

Rolling element bearing monitor · Spectral analysis · Envelope-curve FFT · Trend analysis · Connection via M12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated / keypad: polyester

1 VB1001

Vibration diagnostic unit · Spectral analysis / FFT · Envelope-curve FFT · Peak · V eff RMS · Trend analysis · Connection via M12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated / keypad: polyester

1 VE1001

Vibration diagnostic unit · Spectral analysis / FFT · Envelope-curve FFT · Peak · V eff RMS · Trend analysis · Connection via M12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated

2 VE1101

Vibration diagnostic unit · Spectral analysis · Trend analysis · Connection via M12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated

3 VE1103

Software VB / VE


Orderno.

Expert software for efector octavis · Types VB and VE – VES001

Accessories VB / VE


Parameter setting cable for efector octavis · ifm electronic · straight / straight · 3 m · Housing materials: PUR E11572

USB/RS485 adapter cable · ifm electronic · straight / straight E30098

Power supply · 2 m · Housing materials: PPE E30080

Y connection cable · ifm electronic · 2 way · Free from halogen · 0.25 m · Housing materials: TPU E11664

Diagnostic systems


Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK


Orderno.

Vibration monitor · Connection via M12 connector · Vibration monitor to DIN ISO 10816 · Measuring range Veff: 0...25 mm/s · Switching outputs: normally closed and analogue 4...20 mA · PBT / PC / FPM / stainless steel 316L / 1.4404

4 VKV021

Accessories VK



E30094

Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE


Orderno.

Diagnostic electronics for vibration sensors · Ethernet interface · Switching output, Analogue output · Combicon connection · PA

5 VSE002

Diagnostic electronics for vibration sensors · 4 sensor inputs 0...10 mA · Ethernet interface · Switching output, Analogue output · Combicon connection · PA

6 VSE100

Accessories VSE

Type Description Number ofconnections

Orderno.

Parameter setting software for VSExxx – VES003

Connection cables VSE


Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 5 m · Housing materials: PUR E30112

Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080

Diagnostic systems

287

Vibration sensors for connection to external diagnostic electronics VSE - type VSA


Orderno.

Vibration sensor · for connection to external diagnostic electronics · Connector · housing: stainless steel 316L / 1.4404 7 VSA001

Vibration sensor · for connection to external diagnostic electronics · Cable with connector · housing: stainless steel 316L / 1.4404

8 VSA002

Vibration sensor · for connection to external diagnostic electronics type VSExxx · Cable · housing: stainless steel 316L / 1.4404

9 VSA003


1

20M5

M12

x1

46,458,2

14

65,3

36

37,6

5,35

10

4

M8

x1

LED

1


2

M12

x1

46,458,2

14

65,3

36

20M5

37,6

5

10

4

5,3

M8x

1

3

M12

x1

46,458,2

14

65,3

36

20M5

37,6

5

10

4

5,3

M8

x1

4

63,7

11

M12 x127

27

73,1

M81

1: tightening torque 15 Nm

Diagnostic systems



5

103,4

35,5

25,4

100

1

LEDs

1: Ethernet interface

6

50

114

LEDs

2

1

105

35,5

1: Ethernet interface, 2: Combicon plug with screw terminals (optio-nal)

7

18,5

M8

x1,2

5

M12

x117

5324

178

1

1: conical angle = 90°

8

13

M16

x1,5

14

2218

5

9

18

11,5

12

1500

5,5

Diagnostic systems

289

Manufacturer-independent standard.

Worldwide acceptance as a wiring system.

Communication from the sensor to the controller.

“Safety at Work” for safety-related applications.

Intelligent system solutions for special tasks.

Bus system AS-interface

AS-interface (AS-i = actuator sensor interface) is a manufacturer-independent stan-dard for the connection of actuators and sensors of the first field level. It is the onlywiring system accepted worldwide. With 15 million slaves installed AS-i has beentried and tested as a low-cost feeder for all common fieldbuses for many years.

The product range includes AS-i components for different areas from packagingand conveying via silo applications, machine tools, robotics and automation to thefood industry and mobile vehicles.

Safe

The sophisticated AS-i technology and the extended diagnostic possibilities providehigh reliability and machine uptime.

“Safety at Work” is the extension of the AS-interface by safety-related components.Safety components up to the highest control category 4 to EN 954-1, SIL 3 to IEC61508 and EN ISO 13849 - 1 / PL e can be connected to AS-i.

Easy

Due to the standardised system, the low wiring complexity and the quick connec-tion technology, AS-i enables simple “Plug & Play”. The reduction of terminals leadsto reduced documentation.

Data and energy are jointly transmitted via a two-wire cable. The reverse polarityprotected insulation displacement technology helps avoid errors. The modularityand the tree structure smoothly fit to the way the plant is put together.

Cost-optimised

It’s the end result that matters: Wiring complexity, documentation and set-up timesare significantly reduced. The decentralisation of the AS-i participants leads tosmaller and less expensive control cabinets. Simple diagnosis and a clear systemdesign result in high machine uptime and avoid downtimes.

With “Safety atWork” AS-i alsosolves safety-related tasks.

Reduced cost:reduced wiring com-

plexity for fasterinstallation and fewer

error sources.


290


Controllers, gateways and software 292

AS-i power supplies 293

Insulation monitors 293

I/O modules for control cabinets 293

Field modules IP67 294

Field modules IP69K and accessories 294

Module lower parts 294 - 295

Pneumatic and actuator solutions 295

Safety at Work 295 - 296

AS-i sensors 296

Combicon connectors 296

Flat cable splitters and accessories 296

Accessories Safety at Work 297

Accessories lower parts and addressing units 297

Accessories RFID 298



291

Controllers, gateways and software

Type Numberof

AS-i masters

Description Draw-ingno.

Orderno.

1 SmartLink DP · AS-i gateway / Profibus DP · Full master functions · AS-i version 2.1 and 3.0 1 AC1375

1 SmartLink DP · AS-i gateway / Profibus DP · Full master functions · AS-i version 2.1 1 AC1335

2 AS-i DP gateway · Full master functions · Graphic display · Profibus DP interface · AS-i version 2.1 2 AC1326

2AS-i DP gateway · Full master functions · Graphic display · Profibus DP interface · AS-i version 2.1

and 3.0 2 AC1376

1 AS-i DP controller E · AS-i PLC with Profibus-DP interface · Full master functions 2 AC1365

2 AS-i DP controller E · AS-i PLC with Profibus-DP interface · Full master functions 2 AC1366

1AS-i controller E · AS-i controller freely programmable · Profibus DP interface ·

Ethernet programming interface · Full master functions2 AC1355

2AS-i controller E · AS-i controller freely programmable · Profibus DP interface ·

Ethernet programming interface · Full master functions2 AC1356

1 AS-i Ethernet / IP Controller E · Full master functions 3 AC1327

2 AS-i Ethernet / IP Controller E · Full master functions 3 AC1337

1 AS-i CANopen Controller E · AS-i controller with CANopen interface · Full master functions – AC1331

2 AS-i CANopen Controller E · AS-i controller with CANopen interface · Full master functions – AC1332

1AS-i Profinet gateway · AS-i master · Ethernet configuration interface · Profinet RT device class B ·

LCD colour display · Device supply either via 24 V or AS-i (AS-i bus 1)4 AC1401

2AS-i Profinet gateway · AS-i master · Ethernet configuration interface · Profinet RT device class B ·

LCD colour display · Device supply either via 24 V or AS-i (AS-i bus 1)4 AC1402



AS-i power supplies

Type OutputcurrentAS-i [A]


Orderno.

2.8Power supply · DC convertor 24 V DC for AS-i system voltage · Integrated data decoupling ·

aluminium5 AC1207

2 x 4Power supply · AS-i dual power supply 115/230 V AC 2 x AS-i · Integrated data decoupling ·

aluminium6 AC1212

8Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivate

the AS-i communication · 240 watts · aluminium / steel sheet galvanised7 AC1218

8Power supply · Three-phase AS-i power supply 400...500 V AC · Integrated data decoupling · Jumper

to deactivate the AS-i communication · 240 watts · aluminium / steel sheet galvanised8 AC1223

Insulation monitors


Orderno.

AS-i insulation monitor · Detection of asymmetric insulation faults · Screw terminal 9 AC2211

AS-i insulation monitor · Detection of symmetric and asymmetric insulation faults · Screw terminal 9 AC2212

I/O modules for control cabinets

Type Inputs /outputs


Orderno.

4 inputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 with

extended addressing mode · Digital inputs · Combicon connection · PA10 AC2250

4 inputsActive AS-i module · String mounting possible · Addressing socket · Input supply from external PELV voltage source · Version 2.1 with extended addressing mode ·

Digital inputs · Combicon connection · PA10 AC2254

4 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 ·

Digital outputs · Combicon connection · PA10 AC2252

4 inputs / 3 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 withextended addressing mode · Digital inputs and outputs · Combicon connection · PA

10 AC2264

4 inputs / 4 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 ·

Digital inputs and outputs · Combicon connection · PA10 AC2251

4 inputs / 4 outputs;bidirectional

Active AS-i module · String mounting possible · Addressing socket · External sensor supply PELV · Version 2.1 · Digital inputs and outputs · Combicon connection · PA

10 AC2257


293

Field modules IP67



Orderno.

4 inputsActive ClassicLine module · Version 2.11 and 3.0 with extended addressing mode ·Addressing socket · Three orientations of the flat cable are possible · Digital inputs ·

Sockets M12 x 1 · PA11 AC5215

4 outputsActive ClassicLine module · Addressing socket · Three orientations of the flat

cable are possible · Digital outputs · Sockets M12 x 1 · PA11 AC5208


Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Version 2.11 and 3.0 with extended addressing mode · Digital

inputs and outputs · Sockets M12 x 1 · PA12 AC5204

2 pushbuttons / 2 LED displaysActive module upper parts AS-i illuminated pushbutton module · Power supply via AS-i

cable · Colour inserts changeable · PBT13 AC2086

4 inputsActive CompactLine module · IR addressing possible · Digital inputs ·


4 inputsActive CompactLine module · IR addressing possible · Digital inputs ·



Active CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets M12 x 1 · PA

15 AC2412


Active CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets M12 x 1 · PA

15 AC2459

Field modules IP69K and accessories



Orderno.

AS-i / 24 VFC splitter · V4A · AS-i voltage and external auxiliary voltage via the M12 socket ·

Metal parts: stainless steel 316L / 1.4404 / Blanks: FPM / O-ring: EPDM– E70354

Module lower parts



Orderno.

FC coupling moduleModule lower part flat cable · AS-i interface to module upper part ·

Quick mounting technology for AS-i flat cable · PBT16 AC5000

FC-E coupling module withexternal power supply

FC-E coupling module · AS-i interface to module upper part · Quick mounting technology for AS-i flat cable · PBT

16 AC5003

FC coupling moduleModule lower part flat cable · with addressing plug · AS-i interface to module

upper part · Quick mounting technology for AS-i flat cable · PBT17 AC5010





Orderno.

FC-E coupling module withexternal power supply

FC-E coupling module · with addressing plug · AS-i interface to module upper part · Quickmounting technology for AS-i flat cable · PBT

17 AC5011

Pneumatic and actuator solutions



Orderno.

4 inputs / 2 outputs; AirBoxsupply via AS-i

AS-i AirBox · 2 x 3/2-way slide valves free from overlapping · Three orientations of the flatcable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended

addressing mode · Addressing socket · PA / POM18 AC5228

4 inputs / 1 output ; AirBoxsupply via AS-i

AS-i AirBox · 5/2-way slide valve free from overlapping · Three orientations of the flatcable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended



AS-i AirBox · 5/2-way bistable slide valve free from overlapping · Three orientations of theflat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended



AS-i AirBox · 5/3-way slide valve free from overlapping · Three orientations of the flatcable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended


Safety at Work


Orderno.

AS-i safety monitor · Extended functionality · 1-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal

20 AC003S

AS-i safety monitor · Extended functionality · 2-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal

20 AC004S

AS-i safety monitor · Extended functionality and integrated safe slave for triggering a safe AS-i output · 1-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and

setup by configuration software ASIMON V3.0 · Screw terminal · polyamide black21 AC031S

AS-i safety monitor · Extended functionality and integrated safe slave for triggering a safe AS-i output · 2-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and

setup by configuration software ASIMON V3.0 · Screw terminal21 AC032S

Illuminated E-STOP with integrated AS-i connection · Connector M12 x 1 · AS-i interface via AS-i flat cable IP 67 · fool-proof E-STOP to EN ISO 13850 / EN 418 · Pull to reset

22 AC010S

Fail-safe inductive sensor · GIMC-4030-US · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Connector · PPE / diecast zinc

23 GM504S

Fail-safe inductive sensor · GIMC-4035-US · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Connector · PPE / diecast zinc

23 GM505S

Fail-safe inductive sensor · GIGA-4015-US · M18 x 1 · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Connector · cover: PBT / housing: high-grade stainless steel

24 GG505S


295


Orderno.

Fail-safe inductive sensor · GIIA-4030-US · M30 x 1.5 · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Connector · PEEK / high-grade stainless steel

25 GI505S

AS-i sensors


Orderno.

Read/write head · DTSLF AARWASUS01 · with integrated AS-i slave profile 7.4 · M12 connector · PA 26 DTA100

Read head · DTSLF AAROASUS01 · with integrated AS-i slave profile 7.3 · M12 connector · PA 26 DTA101

Combicon connectors


Combicon connector · with screw terminals 4-pole · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity: 6

E70230

Flat cable splitters and accessories


PAAS M12 · AS-i and external voltage via M12 socket · Sockets M12 x 1 · Housing materials: PA 6.6 / socket housing: stainless steel316L / 1.4404 / screws: stainless steel 316L / 1.4404 / O-Ring : Viton

E70188

FC splitter · V4A · AS-i voltage and external auxiliary voltage via the M12 socket · Housing materials: Metal parts: stainless steel 316L/ 1.4404 / Blanks: FPM / O-ring: EPDM

E70354

FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: PA 6-GF-FR / brass nickel-plated AC5005

FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: PA E70096

T splitter · 2 way · Free from halogen · Free from silicone · gold-plated contacts · Housing materials: PUR E10802

T splitter · 2 way · Free from halogen · Free from silicone · gold-plated contacts · Housing materials: PUR E10803



Accessories Safety at Work


AS-i Safety at Work · ASIMON programming software · Version 3.0 · Configuration, set-up and diagnostics of the AS-i safetymonitor

E7040S

Connection cable PC / AS-i safety monitor · Parameter setting cable PC / AS-i safety monitor · Western connector RJ 45 8 poles / D-Sub socket 9 poles · 2.5 m

E7001S

EMERGENCY STOP label IP66 4 languages D,GB,F,I · EMERGENCY STOP label 4 languages for a safe illuminated EMERGENCY STOP button with integrated AS-i interface AC010S · 50 x 50 mm

E7003S

Accessories lower parts and addressing units


AS-i addressing unit · AS-i version 3.0 with extended addressing mode AC1154

Addressing cable · for AS-i slaves · 1.6 m E70213

Addressing cable · for the addressing of active AS-i compact modules E70423

Use of the lower part as branching box · Housing materials: plastics AC3000

AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lowerparts and compact modules

AC4000

AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lowerparts and compact modules

AC4002

Cable clip for fixing the AS-i flat cable · Housing materials: PA 6.6 · Pack quantity: 100 E70067


297

Accessories RFID


ID tag · ID-TAG/TRIANGEL HOUSING/01 · with ID tag E80301 · Housing materials: PBT orange (RAL 2003) / PA black (RAL 9005) E80302



1

85

124

138

LED

62

4

6857

2

4

10797

86

124

131

LED

62

LED

3

4

10797

86

124

131

LED

62

LED

4

106,293

135,

512

8,2




513

4

50 112,5118,5

6

113118,5

134

120

7

4

10796

91

124

131

Jumper

LED

8

4

122111

129

124

131

LED

Jumper

9

74

22,5

78

110

35,5

10

105

35,5

25

114

LEDs

1

1: Addressing socket

11


299


12

13

4530

80

14

1 2

43

23274,

710

711

8,2

54,

5

28,539

7,5

60

M12x1

15

2327

1 2

4

6

8

3

5

7

4,7

107

152

28,539

7,5

60

54,

5

M12x1

16

80

206

35

66

31

9,65,3

457 7

77

17

80

206

35

66

31

9,65,3

45

7 7

77

1

1: Addressing socket




18

2

4

0

1

0

1

91

108

85

1 50

40

19

1 50

40

2

4

0

1

91

108

85

20

120

35,5

45

104

LED

21

45

105,

9

120

35,5

102

82,6

91,2

22

58,5

66,5

UU

UU

93,5

5610

5

M12

x1

72

80

23

40

M12

x1

4066

17

34

LED

4661

30 20

5,4

105,

4

6

8,5

33

24

M18

x1

55 10

M12

x1

90,5

LED 8 x 45°

79

424


301


25

LED 4 x 90°

69

39

M30

x1,5

5

67

80

36

M12

x1

15

26

5

2

41

4,517

56

17

4,25,5

M12 x1

24

5570

LED

2

1

53,5

1: integrated antenna , 2: tag positioning mark (middle of the antenna)




303

Identification systems

304


305

Multicode reading systems


306 - 307308 - 309

309310

RF-identification systems


312 - 313314315

Orientation-independent identification of 1D and 2D codes.

Very small housing for flexible use.

Simple, menu-guided parameter setting.

Integrated lighting.

High reading reliability even with soiled / damaged codes.

Multicode reader

The ECC200 Data Matrix code is becoming more and more popular throughoutindustry alongside familiar barcodes. In this code lots of information can be storedin a very small space and read using the compact multicode reader. The industriallycompatible mounting and wiring technology as well as the standardised processinterfaces RS-232, Ethernet TCP/IP and EtherNet/IP enable easy and quick integra-tion into the industrial control technology. Applications can be found in manydifferent industrial areas: from the product tracking and production control to pro-duct identification.

Orientation-independent reading

Independent of the orientation and the number of codes, the high-performancealgorithms automatically decode 1D or 2D codes. The optimisation parameters ofthe codes and functions of the multicode reader undergo continuous developmentand are made available as upgrades.

Code comparison in the sensor

Complex application programming is no longer necessary due to adjustable,selective code identification and comparison in the sensor. This allows a definednumber of characters within a code to be checked and signalled via the switchingoutput if they match.

Reliable identification of 1D and 2D codes

In addition to the automatic exposure setting, manual adjustment is also possible.So optimum results are achieved even with highly reflective metal surfaces. Forevaluation of the code quality parameter, ISO / IEC 15415 or 16022 can be used.

The Data Matrix code

The Data Matrix code is a two-dimensional code containing much more informationwith the same structure size than codes such as bar codes or stacked codes. Severalthousand characters can be stored in one code.

An important feature of the Data Matrix code is the high reading reliability. If thecode is soiled or damaged, the intelligent system can completely recompose theinformation from different segments again. The Data Matrix code can be structureddifferently and is variable in shape and size. The size can cover 1 x 1 mm to100 x 100 mm.

Lose no time: Themulticode reader canbe configured in afew minutes and isthen ready for use.Only five guided stepsare necessary for themulticode reader tobe ready for opera-tion. Whether printed

on paper, graved bylaser or dot-peened

on metal: Reliabledetection of the code,

independent of thesensor orientation.


306


Multicode reader 308

Illumination units 308

Software 308

Fixing components 308 - 309

Protective panes and diffusers 309

Connection technology 309

Wiring diagrams 309



307

Multicode reader

Type Dimensions

[mm]

Max.field of

view size[mm]

Typeof light

LED

Motion speedint. / ext. lighting

[m/s]

Processinterface

Draw-ingno.

Orderno.

M12 plug, 8 poles M12 socket, 4 poles · Connector groups 11, 12

60 x 42 x 53.5 68 x 50 red light 3 / 5Ethernet TCP/IP,

EtherNet/IP, RS-2321 O2I100

60 x 42 x 53.5 140 x 100 red light 3 / 5Ethernet TCP/IP,


60 x 42 x 59 400 x 300 red light 3 / 5Ethernet TCP/IP,


Illumination units

Type Dimensions

[mm]

Typeof light

Activeilluminated

area[mm]

I0normal light

intensity[mA]


[mA]

Trigger Draw-ingno.

Orderno.

M12 connector · metal · DC · Wiring diagram no. 1 · Connector groups 7, 8

42 x 42 x 31 red – 180 90External; 24 V PNP to

IEC61131-13 O2D909

Software

Type Description Number ofconnections

Orderno.

Operating software · O2I · for multicode reader · Create and manage application-specific configurationsMonitor mode for set-up and service Service reports for statistical evaluations

– E2I200

Fixing components



E2D110


E2D112

clamp · Ø 14 mm; M12 · free-standing M12 · Housing materials: clamp: stainless steel E20948








Protective panes and diffusers


Plastic diffuser · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21165

Glass protective pane · O2D / O2I · Housing materials: housing: diecast zinc black / lens: float glass E21168

Connection technology


Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR / PC E11898

Wiring diagrams

1

L+

L

1

4

2

3

1: Trigger, 2: Operatingmode “high light intensity”


309


1

M12x1

2

19

M12x1

53,54,

3

20,5

44

19,7

33

145

24,5

42

57

8060

21

9,57

3


2

M12x1

2

19

M12x1

42

57

8060

21

9,57

3 59

4,3

20,5

49,5

25,238,5

1

45

24,5


3

31

4,3

14

30

LED

24M12 x1

54

LED

42




311

Industrially compatible RFID solutions in 125 kHz.

Connection via AS-Interface (125 kHz).

All components integrated into industrially compatible housings.

High reading reliability even under difficult operating conditions.

Easy to mount and set up.


The constant increase of the degree of automation in modern production plants isincreasingly supported by identification systems. Their tasks include, for example,the control or release of production steps or the assignment of information abouteach product in logistics. RFID systems are an alternative for applications where anoptical identification, for example, cannot be used because of the operatingconditions.

Operating principle

The RFID system generates an electromagnetic field for reading and writing data.The electromagnetic field emitted by the antenna induces voltage in the passiveID tag. The activated ID tag (transponder) transmits the code to the fieldbus inter-face via the evaluation electronics.

125 kHz system with AS-Interface

ifm electronic supplies the first RFID system for AS-Interface (AS-i) worldwide. Itallows reading and writing of code carriers (ID tags), benefiting from the advan-tages of AS-i.

For reading, the system uses the AS-i analogue protocol 7.4 for data transfer.Special software modules are not required. Up to 31 read/write heads can be con-nected to one AS-i master. Antenna, electronics and AS-i interface are integrated ina compact housing. Voltage is supplied via AS-i. No additional operating voltagerequired.

The typical ranges of the 125 kHz system are some centimetres.

The ID tag providesflexibility for differenttypes of installation.

The ID tag is mountedto tanks or workpiece

carriers – in the tagfixture or alternatively

by direct mountingusing an M5 grub

screw.


312


RFID systems 314

ID tags 314

Fixing components 314



313

RFID systems

Type Dimensions

[mm]

Travel speedread / write

[m/s]

Processinterface

Draw-ingno.

Orderno.

M12 connector · Connector groups 7, 8

55 x 24 x 41 read: ≤ 0.5 (distance to the ID tag 15 mm) write: only static AS-i 1 DTA100

55 x 24 x 41 read: ≤ 0.5 (distance to the ID tag 15 mm) AS-i 1 DTA101

ID tags


ID tag · ID-TAG/TRIANGEL HOUSING/01 · with ID tag E80301 · Housing materials: PBT orange (RAL 2003) / PA black (RAL 9005) E80302

Fixing components


Mounting set · Clamp mounting · aluminium profile · for type OC · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp:diecast zinc / Cube: diecast zinc

E20901


Mounting set · Clamp mounting · aluminium profile · for type OC · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp:diecast zinc / Cube: diecast zinc

E20901




15

2

41

4,517

56

17

4,25,5

M12 x1

24

5570

LED

2

1

53,5

1: integrated antenna , 2: tag positioning mark (middle of the antenna)


315

International approval package andwide-range input for worldwide use.

Partly adjustable output voltage.

Power reserves to cover temporary overload or supply failure.

Output short-circuit, overload, andno-load protected.

State signalled via DC-ok output.

Power supplies

Transformer power supplies provide a low voltage, normally 24 V DC. A transformeraccording to DIN 0551 ensures a safe electrical separation from mains voltage andlow voltage. The output voltage can be regulated (± 5 %) or smoothed by means ofcapacitors. The different designs and output powers allow adaptation to diverseoperating conditions.

Switched-mode power supplies

Primary switched-mode power supplies are a compact and economical solution tosupply sensors and actuators. As opposed to conventional transformer powersupplies with regulated output voltage primary switched-mode power supplies needno heavy transformers so that there are fewer iron and copper losses. They aretherefore distinguished by a very high degree of efficiency of up to 92 %. Due tothe operating principle by means of high frequency transformers switched-modepower supplies are much smaller and lighter than transformer power supplies withidentical power. Nevertheless they guarantee an electrical separation. Furthermore,they offer a wide input voltage range as standard, e.g. 340 to 576 V AC. Thismakes them fit for worldwide use.

ifm switched-mode power supplies have a regulated output voltage of typ. 24 V DCwith a tolerance of ± 2 %. Apart from few exceptions the output voltage can be setbetween 24 V and 28 V to compensate for example for a voltage drop on longcables. Between no load and full load they ensure a stable supply voltage and thusoperational reliability in case of supply voltage fluctuations.

Power reserves

Mains fluctuations up to ± 15 % and mains interference are compensated for. Evenmains voltage dips of a few milliseconds are compensated for, the output voltage iscompletely maintained. An active inrushcurrent limitation reduces the inrush current via a fixed resistor which is bridgedafter start up.

The outputs are protected against short circuits and overload.

Suitable for theapplication: ifmprovides powersupplies in differentpower classes.

Power supplies

316


Power supplies / switching amplifiers with one output 318

Power supplies / switching amplifiers with 2 inputs and 2 outputs 318

Standard switched-mode power supplies, three phases 318

AS-i switched-mode power supplies, single phase, new ClassicLine design in a robust metal housing 318 - 319

AS-i switched-mode power supplies, single phase, SilverLine 319

AS-i dual switched-mode power supplies, single phase, SilverLine 319

AS-i switched-mode power supplies, three phases, SilverLine 319


Power supplies

317

Power supplies / switching amplifiers with one output

Type Current

[mA]

Output voltage

[V]

Nominal voltage

[V]

Output Draw-ingno.

Orderno.

max. 100 24 DC; ±5% 230 AC (47...63 Hz) relay (1 changeover contact) 1 DN0001

max. 100 24 DC; ±5% 110 AC (47...63 Hz) relay (1 changeover contact) 1 DN0012

Power supplies / switching amplifiers with 2 inputs and 2 outputs

Type Current

[mA]

Output voltage

[V]

Nominal voltage

[V]

Output Draw-ingno.

Orderno.

max. 300 24 V DC; ± 3 % 110...240 AC / -15 / +102 relays (1 changeover contact

per channel)2 DN0200

Standard switched-mode power supplies, three phases

Type Current

[A]

Output voltage

[V]

Nominal voltage

[V]

Mainsbuffering time

[ms]

Efficiencytyp.

[%]

Draw-ingno.

Orderno.

5 24...28 DC (±2%) 3 x 400...500 AC > 16 89 3 DN2032

10 24...28 DC (±2%) 3 x 400...500 AC > 24 90 4 DN2033

20 24...28 DC (±2%)3 x 400...500 AC;

±15%> 11 92 5 DN2134

40 24...28 DC (±2%) 3 x 400...500 AC > 15 92.5 6 DN2035

30 24...28 DC (±2%) 3 x 400...500 AC > 10 93 7 DN2036

AS-i switched-mode power supplies, single phase, new ClassicLine design in a robust metalhousing

Type Current

[A]

Output voltage

[V]

Nominal voltage

[V]

Mainsbuffering time

[ms]

Efficiencytyp.

[%]

Draw-ingno.

Orderno.

2.8 29.5...31.6 DC 100...240 AC 330 (230 V AC) 88 8 AC1236

Power supplies


Type Current

[A]

Output voltage

[V]

Nominal voltage

[V]

Mainsbuffering time

[ms]

Efficiencytyp.

[%]

Draw-ingno.

Orderno.

4 29.5...31.6 DC 100...240 AC 195 (230 V AC / 24 V DC) 88 8 AC1244

AS-i switched-mode power supplies, single phase, SilverLine

Type Current

[A]

Output voltage

[V]

Nominal voltage

[V]

Mainsbuffering time

[ms]

Efficiencytyp.

[%]

Draw-ingno.

Orderno.

2.8 29.5...31.6 DC 24 DC > 10 87 9 AC1207

8 29.5...31.6 DC 115 / 230 AC > 10 92 10 AC1218

AS-i dual switched-mode power supplies, single phase, SilverLine

Type Current

[A]

Output voltage

[V]

Nominal voltage

[V]

Mainsbuffering time

[ms]

Efficiencytyp.

[%]

Draw-ingno.

Orderno.

2 x 4 2 x 29.5...31.6 DC 115 / 230 AC > 10 87 11 AC1212

AS-i switched-mode power supplies, three phases, SilverLine

Type Current

[A]

Output voltage

[V]

Nominal voltage

[V]

Mainsbuffering time

[ms]

Efficiencytyp.

[%]

Draw-ingno.

Orderno.

8 29.5...31.6 DC 3 x 400...500 AC 22 (400V) 91.5 12 AC1223


1

55

75

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

110

35,5

1


2

22,5

78

L+ L– I1

L N I2

12 14 11

2221 24

35,5

120

1


Power supplies

319


3

124

73

LED

131

4 122

103

4

4

121110

90

124

131

3

2

1

6

5

4

1: LED red, 2: reset push button, 3: jumper “overload performance”,4: jumper “single / parallel operation”, 5: with pot., 6: LED green

5

4 127

108

124

150

131

157

LED

6

89

4

107

124

275

131

282

LED

7

89

4

107

124

240

131

LED

247

Power supplies



8

136144

136

50

129

LED

9

134

50 112,5118,5

10

4

10796

91

124

131

Jumper

LED

11

113118,5

134

120

12

4

122111

129

124

131

LED

Jumper

Power supplies

321

Complete product range: sockets, plugs, jumper cables, splitter boxes.

Various cable materials for different applications.

High-quality materials for maximum reliability.

“ecolink” series with innovative quality features.

Integrated LEDs for easy diagnosis.


With a wide variety of different sensor designs ifm electronic offers a wide range ofhigh quality connectors. The choice of types covers common M8, M12, M18 typesthrough to valve plugs. The “ecolink” connectors (order no. EVxxxx) offer addi-tional quality features.

ecolink - a new dimension in connection technology

Due to the special installation of a mechanical end stop the O-ring is alwayscorrectly compressed and so permanently maintains its sealing function. The con-nector remains securely positioned on the unit even in case of extreme vibrationand impacts. Novel design and a transparent black housing ensure that even inbright lighting conditions the LEDs are more clearly visible than with the cleartransparent versions.

For industrial applications:

High-quality materials suited to the requirements in industrial environments. Largelyresistant to oils, greases and coolants.

For hygienic and wet areas:

PVC housing and cable, gold-plated contacts and high-grade stainless steel nuts arethe optimum choice for long life.

For hazardous areas

Connection technology for ATEX categories 2D, 3D and 3G. With the EC typeexamination certificate for components from DEKRA EXAM the connection tech-nology meets the strictest requirements.

For welding applications

Halogen-free PUR cables prevent burning-in of weld spatter; teflon-coated couplingnuts prevent weld spatter sticking. The cables are also suited for drag chains andtorsional movements.

For sensors in robust applications:

The saw tooth contoured vibration protection secures against strong shocks andvibrations. The high protection rating, wide temperature range and high-qualityhousing materials (high-grade stainless steel, TPU) ensure permanent safe con-nection in harsh environments.

Black, transparenthousing for optimumLED visibility.

Maximum operationalreliability due to the

new vibration protec-tion with end stop.


322


M8 sockets for industrial applications 324

M12 sockets for industrial applications 325 - 326

M18 sockets for industrial applications 326

M23 sockets for industrial applications 326 - 327

1/2" sockets for industrial applications 327

M8 cable plugs for industrial applications 327

M12 cable plugs for industrial applications 327 - 328

M8 - M8 jumpers for industrial applications 328

M8 socket - M12 plug jumpers for industrial applications 328 - 329

M12 - M12 jumpers for industrial applications 329

Valve - plug jumpers for industrial applications 330

Splitter boxes for industrial applications 330 - 331

Connectors weld slag resistant 331 - 332

Connectors for robust applications 332




323

M8 sockets for industrial applications

Type Cable Wirespecification

Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Group 1 · Socket M8, 3-pole, 3-wire · Wiring diagram no. 1

5 m blackPUR cable 3 x 0.25 mm2, Ø 3.7 mm

TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 1 EVC142


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 1 EVC143

Group 2 · Socket M8, 3-pole, 3-wire, LED, PNP · Wiring diagram no. 2


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

2 EVC147


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

2 EVC149

Group 3 · Socket M8, 3-pole · Wiring diagram no. 3

wirable –PA /brass

60 AC75 DC

-25...90 IP68 – – E11552



TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 3 EVC150


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 3 EVC151



TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 4 EVC154



60 AC75 DC

-25...90 IP68 – – E11553





Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.


wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass

250 AC/DC -25...85 IP68 – 5 E11509


250 AC/DC -25...85 IP68 – 6 E11508

Group 8 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 7 EVC004


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 7 EVC005


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 8 EVC001


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 8 EVC002


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 8 EVC003

Group 9 · Socket M12, 5/4-pole, 4-wire, LED, PNP · Wiring diagram no. 6


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow9 EVC007


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow9 EVC008


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow9 EVC009



125 AC/DC -25...85 IP68 – 10 E11511




Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Group 11 · socket M12, 8-pole, 7-wire + screen · Wiring diagram no. 8

2 m blackPUR cable 7 x 0.25 mm2 + screen

TPU /diecast zinc

60 AC/DC -25...85 IP67 – 11 E20738

Group 12 · socket M12, 8-pole, 8-wire, for temperature sensors TR 8... · Wiring diagram no. 9


PUR /brass

30 AC36 DC

-25...80 IP68 – 12 E11231


PUR /brass

30 AC36 DC

-25...80 IP68 – 12 E11232


PUR /brass

30 AC36 DC

-25...80 IP68 – 13 E11950


PUR /brass

30 AC36 DC

-25...80 IP68 – 13 E11807


PUR /brass

30 AC36 DC

-25...80 IP68 – 13 E11311



Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.


wirable ...0.75 mm2 (Ø 6...8 mm) PA20...250AC/DC

-40...85 IP65 – 14 E10013

wirable ...0.75 mm2 (Ø 6...8 mm)PA /

ULTRAMID20...250AC/DC

-40...85 IP65 – 15 E10137



Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.


15 m blackPUR cable

8 x 0.5 mm2 + 3 x1.0 mm2, Ø 9.3 mm

PUR /brass

250 AC/DC -25...80 IP67 – 16 E11741




Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.


5 m blackPUR cable

16 x 0.5 mm2 + 3 x1.0 mm2, Ø 11.6 mm

PUR /brass

160 AC/DC -25...80 IP67 – 17 E11742

1/2" sockets for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Group 16 · socket 1/2“, 2-pole + PE, 3-wire · Wiring diagram no. 11

2 m yellowPVC cable

3 x AWG22, Ø 5.2 mmTPU /brass

250 AC300 DC

-25...90 IP67 – 18 E10190

5 m yellowPVC cable 3 x 0.34 mm2, Ø 5.2 mm

TPU /brass

250 AC300 DC

-25...90 IP67 – 18 E10200

M8 cable plugs for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Group 17 · Plug M8, 3-pole · Wiring diagram no. 12


60 AC75 DC

-25...90 IP68 – – E11550

M12 cable plugs for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



250 AC/DC -25...85 IP68 – 19 E11504


wirable ...0.75 mm2 (Ø 6...8 mm)PBT (Pocan) /stainless steel316L / 1.4404

125 AC150 DC

-40...85 IP68 – 20 E11252




Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



125 AC/DC -25...85 IP68 – 21 E11507


125 AC/DC -25...85 IP68 – 22 E11506

M8 - M8 jumpers for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Group 21 · Jumper , plug: M8, 4-pole, socket: M8, 4-pole, 4-wire · Wiring diagram no. 15


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 23 EVC302



TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 24 EVC313

M8 socket - M12 plug jumpers for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.


0.3 m blackPUR cable 3 x 0.34 mm2, Ø 4.9 mm

TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 25 EVC215



TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 26 EVC238


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 27 EVC240


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 27 EVC241




Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 27 EVC242


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 27 EVC243

M12 - M12 jumpers for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 28 EVC016


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 29 EVC012


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 29 EVC013

Group 26 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire, LED · Wiring diagram no. 17


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow30 EVC020


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow30 EVC021


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow30 EVC022


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow30 EVC023


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow30 EVC024



TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 31 EVC059



Valve - plug jumpers for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Group 28 · Jumper , plug: M12, 3-pole, valve plug: Housing A, 4-pole, 3-wire, LED · Wiring diagram no. 19

0.3 m blackPUR cable 3 x 0.5 mm2, Ø 5 mm

PUR /brass

24 AC/DC -25...80 IP67 yellow 32 E11416

0.6 m blackPUR cable 3 x 0.5 mm2, Ø 5 mm

PUR /brass

24 AC/DC -25...80 IP67 yellow 32 E11417

1 m blackPUR cable 3 x 0.5 mm2, Ø 5 mm

PUR /brass

24 AC/DC -25...80 IP67 yellow 32 E11418


PUR /brass

24 AC/DC -25...80 IP67 yellow 32 E11419

Splitter boxes for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Group 29 · splitter box M8, 4-pole · Wiring diagram no. 24

10 m blackPUR cable

16 x 0.34 mm2 + 2 x0.75 mm2, Ø 9.1 mm

PBT-GF 20 10...30 DC -25...90 IP68green /

16 x yellow33 E11218

Group 30 · M12 splitter box for 1 signal · Wiring diagram no. 20


TPU /brass

10...55 DC -25...80 IP67 – 34 E10437


10 m blackPUR cable

4 x 0.34 mm2 + 3 x 1 mm2,Ø 7.5 mm

PA 10...30 DC -25...80 IP67green /

4 x yellow35 EBC027


5 m blackPUR cable

6 x 0.34 mm2 + 3 x 1 mm2,Ø 7.8 mm

PA 10...30 DC -25...80 IP67green /

6 x yellow36 EBC019

10 m blackPUR cable

6 x 0.34 mm2 + 3 x 1 mm2,Ø 7.8 mm

PA 10...30 DC -25...80 IP67green /

6 x yellow36 EBC031




Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.


10 m blackPUR cable

8 x 0.34 mm2 + 3 x0.75 mm2, Ø 8.2 mm

PA 10...30 DC -25...80 IP67green /

8 x yellow37 EBC035


10 m blackPUR cable

16 x 0.34 mm2 + 3 x0.75 mm2, Ø 9.7 mm

PA60 AC75 DC

-25...80 IP67 – 38 EBC034

Group 35 · M12 splitter box for 2 signals · Wiring diagram no. 29

10 m blackPUR cable

16 x 0.34 mm2 + 3 x1.0 mm2, Ø 9.7 mm

PA 10...30 DC -25...80 IP67green /

16 x yellow39 EBC036

Group 36 · M12 splitter box for 2 signals · Wiring diagram no. 30

M23 connector – PA 10...30 DC -25...80 IP67green /

16 x yellow40 EBC012

Connectors weld slag resistant


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.


2 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm

TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 41 EVW004


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 41 EVW005


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 41 EVW006


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 42 EVW001


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 42 EVW002


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 42 EVW003




Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Group 38 · Socket M12, 4-pole, 4-wire, LED, PNP · Wiring diagram no. 6


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow43 EVW007


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow43 EVW008


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow43 EVW009



TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 7 EVW013


TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 7 EVW014


TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 7 EVW015



TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 8 EVW010


TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 8 EVW011


TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 8 EVW012

Connectors for robust applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Group 41 · Jumper M12, 5-pole, 5-wire · Wiring diagram no. 22

1 m blackPUR cable

2 x 0.25 mm2 + 3 x0.34 mm2, Ø 6.8 mm

TPU /brass

30 AC36 DC

-40...90 IP67 / IP69K – 44 E11592

10 m blackPUR cable

2 x 0.25 mm2 + 3 x0.34 mm2, Ø 6.8 mm

TPU /brass

30 AC36 DC

-40...90 IP67 / IP69K – 44 E11595



Core colours

BK black

BN brown

BU blue

WH white

GN green

GY grey

PK pink

YE yellow

screen screen

OG orange

VT lilac

RD red

RD/BK red/black

RD/WH red/white

GN/YE green/yellow

Wiring diagrams

1

1

3

BN

BU

4 BK

2

1

3

L+

4

L

YE GN

BN

BU

BK out

3

1

3

4

4

1

2

3

4

BN

WH

BU

BK

5

1

2

3

4

6

out

out

L+

L

1

3

4

YE GN

BN

BU

BK

2 WH

YE

7

1

2

3

4

5

8

4

5

6

7

8

2

3

1

YE

GY

PK

BU

screen

BN

GN

WH

9

4

5

6

7

8

2

3

1

BK

GY

PK

VT

OG

WH

BU

BN

10

4

5

6

7

8

2

3

1

GY

GY/PK

RD/BU

WH/GN

BN/GN

GN

YE

WH

9

10

11

12

BU

BN

YE/GN

11

1

2

3

GN

RD/BK

RD/WH

12

1

3

4

13

1

2

3

4

14

1

2

3

4

5

15

1

2

3

1

2

3

4 4

16

1

3

4

1

3

4

17

out

out

L+

L

1

3

4

GN YE

2

1

3

4

2

YE

18

1

2

3

4

1

2

3

4

5 5

19

1

2

YE4

3

5

20

BN

BU

BK

WH

1 (1...2)

3 (1...2)

4 (1)

4 (2)

21

1

2

3

4

5

BN

WH

BU

BK

GY

22

1

2

3

4

1screen

2

3

4

5 5

RD

BK

WH

BU


333

Wiring diagrams

23

4

5

6

7

8

2

3

1

RD/BU

GN

BU

GY/PK

WH/GN

RD

GY

VT

9

10

11

12

WH/YE

WH/GY

BK

GN/YE

13

14

15

YE/BN

BN/GN

WH

16

17

18

19

YE

PK

GY/BN

BN

24

BN

WH

GN

GY/PK

1 (1...8)

4 (1)

2 (1)

4 (2)

2 (2)

YE

GN

RD/BU

4 (3)

2 (3)

YE

WH/GN

4 (4)

2 (4)

GY

BN/GN

+

-BU 3 (1...8)

4 (5)

2 (5)

PK

WH/YE

4 (6)

2 (6)

RD

YE/BN

4 (7)

2 (7)

BK

WH/GY

4 (8)

2 (8)

VT

GY/BN

25

1

GN

2

1 (1...4)

3 (1...4)

4 (1)

4 (2)

4 (3)

4 (4)

YE

3

4

+

-

-

10

9

11

5 (1...4)12

26

BN

WH

GN/YE

GN

GN

1 (1...6)

5 (1...6)

4 (1)

4 (2)

4 (3)

4 (4)

YE

YE

GY

4 (5)

4 (6)

PK

RD

+

-BU 3 (1...6)

27

WH

GN

GN

1 (1...8)

3 (1...8)

4 (1)

4 (2)

4 (3)

4 (4)

YE

YE

GY

+

- BU

BN

4 (5)

4 (6)

PK

RD

4 (7)

4 (8)

BK

VT

5 (1...8)GN/YE

28

GY/PK

RD/BU

WH/GN

BN/GN

WH

BU

GN/YE

BN

2 (1)

2 (2)

2 (3)

2 (4)

4 (1)

3 (1...8)

5 (1...8)

1 (1...8)

WH/YE

YE/BN

2 (5)

2 (6)

WH/GY

GY/BN

2 (7)

2 (8)

GN

YE

GY

PK

RD

4 (2)

4 (3)

4 (4)

4 (5)

4 (6)

BK

VT

4 (7)

4 (8)



Wiring diagrams

29

GN

1 (1...8)

5 (1...8)

4 (1)

2 (1)

4 (2)

2 (2)

YE

4 (3)

2 (3)

4 (4)

2 (4)

+

-3 (1...8)

4 (5)

2 (5)

4 (6)

2 (6)

4 (7)

2 (7)

4 (8)

2 (8)

PK

WH/YE

RD

YE/BN

BK

WH/GY

VT

GY/BN

BN

WH

GN/YE

GY/PK

GN

RD/BU

YE

WH/GN

GY

BN/GN

BU

30

19

15

12

GN

7

1 (1...8)

5 (1...8)

4 (1)

2 (1)

4 (2)

2 (2)

YE

5

4

4 (3)

2 (3)

16

8

4 (4)

2 (4)

3

14

+

-6 3 (1...8)

4 (5)

2 (5)

17

9

4 (6)

2 (6)

2

13

4 (7)

2 (7)

11

10

4 (8)

2 (8)

1

18


1

9

10 31

M8x1 1

4

3

2

9

10 19

M8x1 25,5

LED1

4

3

3

9

10 31

M8x1

4

3

2

1

4

9

10 19

M8x1 25,5

4

3

2

1

5

35

18

20

M12 x1

30

3

1 2

4

6

18

M12 x1

46

3

1 2

4


335


7

15,5

M12x1 36,5

26,5

14 3

1 2

4

5

8

15,5

M12x1 45

14

3

1 2

4

5

9

15,5

M12x1 36,5

26,5

143 LED 3

1 2

4

5

10

20

M12 x1

46

3

1 2

4

5

11

13Ø14,5

43,9M12x1

4

1 2

65

378

12

15

38

M12 x1

28

10,5

4

1 2

65

378

13

15

M12 x1

43

4

1 2

65

378

14

25

M18 x1

36

21

43

21

3

1 4

2

15

25

M18 x1

56

3

1 4

2

16

51

70

26

M 23 x1

9 81127

6511

1023

4

17

26

M 23 x1

851

234

56 7

89

101112

13

14

15

16

17

1819

18

27

10,5

15

39

G 21

3

1

2




19

5220

M12 x1

43

2 1

20

19

M12 x1

31

39

18

3

1 2

4

21

42

18

15

20

M12 x1

31

4

2 1

3

5

22

5220

M12 x14

2 1

3

5

23

M8x1

9M8x1

1010

10

25,536 L

9

19

2

1

4

34

3

2

1

24

9M8x1 9M8x1 9 M8x1

1010 10

3136 L

2

1

4

34

3

2

1

25

L

9

49,5

14

M12

x1

M8x1

10

31

4

1

3 1

4

3

26

M8x110

25,5L

9

19

49,5

14

M12

x1

43

2 1 4

3

2

1

27

L

9

49,5

14

M12

x1

M8x1

10

31

43

2 1 4

3

2

1

28

49,5

14

L

15,5

M12x1

M12x1

26,5

14

36,5

15,5

43

2 1

3

1 2

4

5

29

49,5

14

15,5

M12x1

45

14

L

15,5

M12x1

43

2 1

3

1 2

4

5

30

49,5

14

L

15,5

M12x1

M12x1

26,5

14

36,5

15,5

LED

43

2 1

3

1 2

4

5


337


31

49,5

14

15,5

M12x1

45

14

L

15,5

M12x1

4

2 1

3

5

3

1 2

4

5

32

L 17,5 29,5

29,5

M12

x1

47

LED

M 3

28,5

435 2 1

33

145 12

9

4,5

4,5

8,51821

11,5

M8x1

LED

129

4,5

26

4

3

2

1

34

10,423,5

17

53

6,5

1630

,542

3

1 2

4

35

1 2

43

PWR

18224,

773

118,

234

55

4,5

28,539

7,5

60

M12x1

3

1 2

4

5

36

1 2

4

6

3

5

PWR

18224,

773

125

34

55

4,5

28,539

7,5

60

M12x1

3

1 2

4

5

37

1 2

4

6

8

3

5

7

PWR

18224,

773

152

34

55

4,5

28,539

7,5

60

M12x1 3

1 2

4

5




38

1 2

4

6

8

3

5

7

18224,

773

152

34

55

4,5

28,539

7,5

60

M12x1 3

1 2

4

5

39

1 2

4

6

8

3

5

7

PWRB

A

B

A

B

A

B

A

B

A

B

A

B

A

B

A

18224,

773

152

34

55

4,5

28,539

7,5

60

M12x1 3

1 2

4

5

40

1 2

4

6

8

3

5

7

PWRB

A

B

A

B

A

B

A

B

A

B

A

B

A

B

A

1833

4,7

7315

234

55

4,528,5

397,5

60

M23 x 1

M12x1

123

4567

8

910

11 12

13

14

15

16

17

1819

3

1 2

4

5

41

15,5

M12x1 36,5

26,5

14 3

1 2

4

42

15,5

M12x1 45

14

3

1 2

4

43

15,5

M12x1 36,5

26,5

143 LED 3

1 2

4

44

43

M12

x1

47 L

M12

x1

4

2 1

3

5

3

1 2

4

5


339

ifm – worldwideaddresses

340

Argentinaifm electronic s.r.l.Manuela Sáenz 3235º piso, oficina 3C1107BPA – Puerto MaderoBuenos Aires, ArgentinaTel. (011) 5353-3436Fax (011) 5353-3436Interior [email protected]/ar

Australiaifm efector pty ltd.P.O. Box 4084Suite 3, 745 Springvale RoadMulgrave VIC 3170Tel. 1300 365 088Fax 1300 365 [email protected]

Austriaifm electronic gmbhWienerbergstraße 41Gebäude E1120 ViennaTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 [email protected]/at

BangladeshSensotec AutomationRed Crescent Chamber87, Motijheel CommercialAreaDhaka 1000BangladeshTel. +880 171 546 [email protected]

BelarusDEPOSIT INVESTJoint-Stock CompanyBlock 2, 27 Zheleznodorovhnaya street220089 MinskRepublic of BelarusTel. +375-17-270 75 06Fax +375-17-270 75 [email protected]

Belgium andLuxembourgifm electronic n.v./s.a.Zuiderlaan 911731 ZellikTel. +32 2 481 0220Fax +32 2 463 [email protected]/be

BoliviaBAVARIA S.R.L.Álvaro Baptista VargasZona Morocollo, Urb. Santos PariamoC. Mario Diaz de medina (26-A), Nr. 32La Paz - BoliviaTel.: 00-591-2-277 13 78Mobile: 00-591-720-47 [email protected]

Brazilifm electronic Ltda.Rua Eleonora Cintra, 140Jardim Analia Franco03337-000 Sāo Paulo/SPTel. +55-11-2672-1730Fax [email protected]/br

Bulgariaifm electronic eoodul. Slatinska Nr. 92 A, ap. 2/31574 SOFIATel. +359 2 807 59 69Fax +359 2 807 59 [email protected]

Canadaifm efector Canada Inc. 700 Dorval Drive/CorporateCentreOakville; L6K3V3 OntarioTel. +1-800-441-8246 Fax [email protected]

ChileElectronica IndustrialSchädler y Cia. Ltda.Av. Antonio Varas 1871Providencia6641545 SantiagoTel. +56 / 2 / 274 74 30Fax +56 / 2 / 204 93 [email protected]

Chinaifm electronic (Shanghai) Co., LtdBuilding 15, No 912Bi Bo Road, Pu Dong DistrictShanghai 201210, ChinaTel. +86-21-50278559 Fax +86-21-50278669Fax [email protected] www.ifm.com/cnifm electronic (HK) LtdUnit 2106, 21/F, Tower 2, MetroplazaNo. 223 Hing Fong Road, Kwai Chung, N.T., Hong Kong.Tel. +852 3528-0462Fax +852 [email protected]/hkifm electronic (Taiwan) Limited2C, Bao-Cheng Enterprise Tower,No. 6 Mincyuan Second Road,Cianjhen District, Kaohsiung City,Postal Code 806, Taiwan, R.O.C.Tel. +886-7-335-7778Fax [email protected]/tw

ColumbiaSENSOMATIC Y CIA LTDA.CALLE 1 C 25a - 50BOGOTA D.C. COLOMBIATel. +57 313 430 2264Tel. +57 1 407 96 [email protected]

Croatiaifm electronic gmbhWienerbergstr. 41Gebäude EA-1120 WienTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 [email protected]/hr

Czech Republicifm electronic spol.s.r.o.U Křížku 571252 43 PragueTel. +420 / 2 / 67 990 211 Fax +420 / 2 / 67 750 180 [email protected]/cz

Denmarkifm electronic a/sRingager 4A, 1.sal tv.2605 BrøndbyTel. +45 70 20 11 08Fax +45 70 20 11 [email protected]/dk

Dominican RepublicWECH AUTOCONTROLES S. A.Ave. Romulo Betancourt 2158 Edificio WechUrb. RenacimientoSanto DomingoDominican RepublicTel.: + 1 809-531-0550Fax: + 1 [email protected]

EcuadorINSELEC CIA. LTDA.Av. de los AruposE1-202 y Pan. Norte- Km 5 ½QuitoTel. +593 2 28074- 76 - 78Fax +593 2 [email protected]

EgyptEgyptian Establishment forElectromechanical SuppliesMr. Ahmed Gouda27 Al-Salam StreetAl Arezona, Al Haram RoadGiza 12111, CairoTel. +20 / 2 / 586 49 49Fax +20 / 2 / 586 49 49Mobile +20 10 10 61 [email protected]

EstoniaPesmel Estonia LTDSegu 476505 SaueEstoniaTel.: +372 674 73 30 Fax: +372 674 73 [email protected]

Finlandifm electronic oyVaakatie 5 00440 Helsinki Tel. +358 / 9 / 751 777 00 Fax +358 / 9 / 751 777 10 [email protected]/fi

Franceifm electronicSiège :Savoie Technolac BP22673374 Le Bourget du LacAgence commerciale :Immeuble Uranus1-3 rue Jean Richepin93192 NOISY LE GRANDCEDEXTél: 0820 22 30 01Fax: 0820 22 22 [email protected]/fr

Germanyifm electronic gmbhFriedrichstr. 145128 EssenTel. +49 201 24 22 0Fax +49 201 24 22 12 [email protected]/de

Greeceifm electronic monoprosopi E.P.E.27, Andrea Papandreou Street15125 AmaroussiGreeceTel. +30 210 61 800 90Fax +30 210 61 994 [email protected]/gr

HondurasR y D INDUSTRIALBo. Paz Barahona11 Ave. 14 y 15 CalleS.O. #142San Pedro SulaTel. +504 5503703Fax +504 [email protected]

Hungaryifm electronic kft.Szent Imre út 59. I.em.H-9028 GyőrTel. +36-96 / 518-397Fax +36-96 / [email protected]/hu

Indiaifm electronic India Pvt. Ltd.Plot No. P-39/1MIDC Gokul ShirgaonKolhapur – 416234Maharashtra State, IndiaTel. +91 / 231 / 267 27 70Fax +91 / 231 / 267 23 [email protected]/in

IndonesiaPT Indoserako SejahteraJl. P. Jayakarta 121 No. 5910730 Jakarta PusatTel. +62 / 21 6 24 8923Fax +62 / 21 6 24 [email protected]

Irelandifm electronic (Ireland) Ltd.No. 7, The CourtyardKilcarbery Business ParkNew Nangor RoadClondalkinDublin 22Tel. +353 / 1 / 413 60 66Fax +353 / 1 / 457 38 [email protected]/ie

IsraelAstragal Ltd.3, Hashikma Str.Azur 58001P.O. Box 99Azur 58190Tel. +972 / 3 / 5 59 16 60Fax +972 / 3 / 5 59 23 [email protected]

Italyifm electronicCentro Direzionale ColleoniPalazzo Andromeda 2Via Paracelo n° 1820041 Agrate Brianza (Milano)Tel. +39 / 039 68 99 982Fax +39 / 039 68 99 [email protected]/it

Japanefector co. ltd.Chiba Higashi Techno Green Park2-9-20 OkayamadaiTogane-shi, Chiba 283-0826Tel. +81 / 475 50 3003Fax +81 / 475 50 [email protected]/jp

JordanAl Mashreqan Trading SuppliesP.O.Box.85105411185 SwaifiehAmman - Jordan.Tel. +962 6 581 8841Fax +962 6 581 [email protected]

ifm – worldwideaddresses

341

Koreaifm electronic Ltd.2F Hyundai Liberty House #201Hannam-Dong 258,Yongsan-Gu,Seoul, KoreaTel. +82 2-790-5610Fax +82 [email protected]/kr

LatviaEC SystemsKatlakalna Str. 4A1073 RigaLatviaTel.: +371 724 1231Fax: +371 724 [email protected]

LebanonMiddle East DevelopmentCo. SAL (MEDEVCO)Medevco Building Jeita Main Road Jeita - Kesrouan LebanonMail address :P.O.Box 67 Jounieh LebanonTel. +961-9-233550 Fax +961-9-233554 [email protected]

LithuaniaElinta UABTerminalo g. 3, Biruliškių k.,Karmėlavos sen.LT-54469 Kauno raj. (Kauno LEZ)LithuaniaTel.: +370 37 351 999Fax: +370 37 452 [email protected]

Malaysiaifm electronic Pte. LtdMalaysian Branch OfficeNo. 2-4-2, Fourth FloorTower 2 @ PFCC, Jalan Puteri 1/2,Bandar Puteri Puchong,47100 Puchong, Selangor.Tel. +60 / 3 / 8063 9522Fax +60 / 3 / 8063 [email protected] electronicAsia Regional OfficeNo. 21, Jalan Kemunting,Taman Kebun The80250 Johor BahruJohor, West MalaysiaTel. +60 / 7 / 332 5022Fax +60 / 7 / 332 [email protected]

Mexicoifm efector S. de R.L. de C.V.Anillo Periférico, 1816-1Col. Hacienda San JerónimoMonterrey, N.L.Mexico 64630Tel. +52-81-8040-3535Fax +52-81-8040-2343www.ifmefector.mx

Netherlandsifm electronic b.v.Deventerweg 1 E3843 GA HarderwijkTel. +31 / 341 438 438Fax +31 / 341 438 [email protected]/nl

New Zealandifm efector pty ltd.Unit B, 20 Cain RoadPenrose, AucklandTel. +64 / 95 79 69 91Fax +64 / 95 79 92 [email protected]/nz

NigeriaAutomated Process Ltd3rd Floor, 32 Lagos AbeokutaExpresswayNear Cement Bus StopDopemu, AgegeLagos State, NigeriaTel. + 234 / 01 / 4729 967Fax + 234 /01 / 4925 [email protected]

NorwaySiv.Ing. J.F.Knudtzen ASBillingstadsletta 971396 BillingstadPostboks 1601378 NesbruTel. +47 / 66 98 33 50Fax +47 / 66 98 09 [email protected]

OmanTechnical Engineering Company LLC.P.O. Box 59 Madinat Al Sultan QaboosPostal Code 115 Sultanate of OmanTel. +968 24503593Fax +968 [email protected]

PakistanAB AutomationShop No.2. Rubab ChamberM.A. Jinnah RoadOff Sarai RoadKarachiTel. +92 / 21 / 2412 278Fax +92 / 21 / 2422 [email protected]

Perudekatec s.a.c.Los Calderos 188Urb. Vulcano, AteLima / PeruTel. +511 / 348 0293Tel. +511 / 348 0458Tel. +511 / 348 2269Fax +511 / 349 [email protected]

PhilippinesGram Industrial, Inc.Unit 402 & 410 CommonGoal TowerFinance cor., Industry St.,Madrigal Business Park AyalaAlabangMuntinlupa City 1770Telephone: 632-8502218/8508496Fax: 632-8077173 / [email protected]

Polandifm electronic Sp.z o.o.ul. Kosciuszki 175PL 40-524 KatowiceTel. +48 / 32 / 60 87 454Fax +48 / 32 / 60 87 [email protected]/pl

Portugalifm electronic –Sucursal em PortugalAvenida da Republica 25034430-208 Vila Nova de GaiaTel. +351 / 22 / 37 17 108Fax +351 / 22 / 37 17 [email protected]/pt

Romaniaifm electronic s.r.l.Str. Cristian Nr. 5550073 SibiuTel.: 0040 269 224550Fax: 0040 269 [email protected]

Russiaifm electronicIbragimova, 31, k.50office 607105318 MoscowTel.: +7 (495) 921-44-14Fax: +7 (495) [email protected]/ru

Saudi ArabiaNoor Al-Shomoe for Electric & MaintenanceKing Khalid Street, Cross 5P.O. Box 2571Al-Khobar 31952Kingdom of Saudi ArabiaTel. +9 663 864 49 58Fax +9 663 894 63 [email protected]

Singaporeifm electronic Pte. Ltd.25, Intern. Business Park#03-104 German Center609 916 SingaporeTel. +65 / 6 / 5 62 86 61Fax +65 / 6 / 5 62 86 [email protected]/sg

Slovakiaifm electronic spol. s.r.o.Rybnicna 40831 06 BratislavaTel. +421 / 2 / 44 87 23 29Fax +421 / 2 / 44 64 60 [email protected]/sk

South Africaifm electronic (pty) LtdShorrok HouseRoute 21 Corporate ParkNellmapius Drive, Irene Ext. 30, Centurion 0157, Pretoria Postnet Suite 279Private bag X8Elardus Park0047Tel. +27 (0) 861 IFM RSA /436 772Fax +27(0)12 450 [email protected]/za

Spainifm electronic s.l.Edificio Prima Muntadas AParc Mas BlauC/Berguedà 108820 El Prat de LlobregatTel. +34 / 93 / 479 30 80Fax +34 / 93 / 479 30 [email protected]/es

Swedenifm electronic abHallavägen 10 512 60 Överlida Office Gothenburg:Drakegatan 641250 GothenburgTel. +46 / 325 / 66 15 00 Tel. +46 / 325 / 66 15 50Fax +46 / 325 / 66 15 [email protected]/se

Switzerlandifm electronic agAltgraben 274624 HärkingenTel. +41 / 62 / 388 80 30Fax +41 / 62 / 388 80 [email protected]/ch

SyriaI.E.C. Industrial Engineering CenterP.O. Box 15 Sehnaya, DamascusSyriaTel. + 963 11 532 13 19Fax. + 963 11 442 12 [email protected]

ThailandSang Chai Meter Co., Ltd.694/16-19 Phaholyothin RoadSamsen Nai, Phayathai Bangkok 10400 Tel. +66 / 2 / 616 8051Fax +66 / 2 / 616 [email protected]

Turkeyifm electronic Elektrikli veElektronik Aletlerİth.İhr.Paz.Tic.Ltd.Şti. Merkez Mah. Nadide Sok. Anıttepe Sitesi No:28 34381 Şişli / İstanbulTel. +90 / 212 / 210 5080Fax +90 / 212 / 221 [email protected]/tr

Ukrainaifm electronicMariny Raskovoj 1102660 KievUkraineTel. +380 44 501 8543Fax +380 44 501 [email protected]/ua

United Arab EmiratesNoor Al-Shomoe Electrical Equipments Est.P.O.Box. 64052Unit no. 36Reef Real EstateJebel Ali Industrial Area no. 3DubaiUnited Arab Emirates.Tel. +971 4 880 3838Fax +971 4 880 3883Mobile +971 [email protected] Arab Emirates –Abu DhabiAl Injazat Technical Trading ServicesP.O. Box 42895Abu DhabiUnited Arab EmiratesTel. +971 2 622 6030Fax +971 2 622 [email protected]

United Kingdomifm electronic Ltd.efector HouseKingsway Business ParkOldfield RoadHamptonMiddlesex TW12 2HDTel. +44 / 20 / 8213 0000Fax +44 / 20 / 8213 [email protected]/uk

USAefector inc.805 Springdale Drive Exton, PA 19341 Tel. +1 / 610 524 2000 Fax +1 / 610 524 [email protected]

VenezuelaPetrobornas, C.A.Calle Pricipal, Centro Comercial Astur, Nivel PB, Local 05, Sector Matanzas, UD-321,Puerto Ordaz - Estado BolivarVenezuela Tel. +58 286-994 3406Tel. +58 286-718 1123 Fax +58 286-994 3406Fax +58 286-994 [email protected]

VietnamThien Viet Electrical Serviceand Trading Co., Ltd.784 Dien Bien Phu Str.Ward 11, Dist. 10Ho-Chi-Minh-City, Viet NamTel. +84 / 8 / 830 9916 Fax +84 / 8 / 830 [email protected]

visit our website:

www.ifm.com

Position sensorsand object recognitionInductive sensorsCapacitive sensorsMagnetic sensors,cylinder sensorsSafety technologyValve sensorsPhotoelectric sensorsObject recognitionEncodersEvaluation systems,power suppliesConnection technology

Fluid sensorsand diagnostic systemsLevel sensorsFlow sensorsPressure sensorsTemperature sensorsDiagnostic systemsEvaluation systems,power suppliesConnection technology

Bus systemsBus system AS-InterfacePower suppliesConnection technology

Identification systemsMulticode reading systemsRF-identification systemsPower suppliesConnection technology

Control systemsControl systemsfor mobile vehiclesConnection technology

Overview ifm product range:

We reserve the right to make technical alterations without prior notice. · 01.2011

· 2011. 7. 8. · Global Catalogue 2011/2012. The automotive catalogue of ifm electronic gmbh: ... This ifm catalogue should help you to define the optimum products for your tasks.

Documents