Top Banner

of 254

Hardware Ex 3200

Apr 07, 2018

Download

Documents

Sia Ada
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
  • 8/6/2019 Hardware Ex 3200

    1/254

    Complete Hardware Guide for EX3200 EthernetSwitches

    Published: 2011-03-29Revision 2

    Copyright 2011, JuniperNetworks, Inc.

  • 8/6/2019 Hardware Ex 3200

    2/254

    Juniper Networks, Inc.1194 NorthMathilda AvenueSunnyvale, California94089USA408-745-2000www.juniper.net

    Thisproduct includes the Envoy SNMP Engine, developed by EpilogueTechnology,an IntegratedSystemsCompany. Copyright 1986-1997,Epilogue TechnologyCorporation. All rights reserved. Thisprogram and its documentation were developed at private expense, and no partof them is in the public domain.

    This product includes memory allocation software developed by Mark Moraes, copyright 1988, 1989, 1993,Universityof Toronto.

    This product includes FreeBSD softwaredeveloped by theUniversity of California, Berkeley, and its contributors. All of the documentationand softwareincluded in the 4.4BSDand 4.4BSD-Lite Releases is copyrighted by the Regentsof the University of California. Copyright 1979, 1980, 1983, 1986, 1988, 1989,1991, 1992, 1993, 1994. The Regents of the University of California. All rights reserved.

    GateD software copyright 1995, theRegents of the University. All rightsreserved. Gate Daemon was originated and developed throughrelease 3.0by Cornell University and its collaborators. Gated is based on Kirtons EGP, UC Berkeleysrouting daemon (routed), and DCNsHELLO routing protocol. Development of Gated hasbeen supported in part by the National Science Foundation. Portions of the GateDsoftware copyright 1988, Regents of the University of California. All rightsreserved. Portions of the GateDsoftware copyright 1991, D.L. S. Associates.

    This product includes softwaredeveloped by Maker Communications, Inc., copyright 1996, 1997, Maker Communications, Inc.

    Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the UnitedStates and other countries. TheJuniper Networks Logo, theJunos logo, and JunosEare trademarks of Juniper Networks, Inc. All othertrademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.

    JuniperNetworks assumes no responsibility for any inaccuracies in this document. Juniper Networksreserves theright to change, modify,transfer, or otherwise revise this publication without notice.

    Productsmade or sold by Juniper Networks or components thereof might be covered by oneor more of the following patents that areowned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312,6,429,706, 6,459,579, 6,493,347,6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

    EX3200 Ethernet Switches Complete HardwareGuide for EX3200 Ethernet SwitchesCopyright 2011, JuniperNetworks, Inc.All rights reserved.

    Revision HistoryDecember 2010Revision 1March2011Revision 2

    The information in this document is current as of the date listed in therevision history.

    YEAR 2000 NOTICE

    JuniperNetworks hardware and software products areYear 2000 compliant. The Junos OS hasno known time-related limitations throughthe year 2038. However, the NTP application is known to have some difficulty in the year 2036.

    SOFTWARE LICENSE

    The terms and conditions for using thissoftware are described in the softwarelicense contained in the acknowledgment to your purchaseorder or, to the extent applicable, to any reseller agreement or end-user purchase agreement executed between youand Juniper Networks.By using this software, youindicate that you understand and agree to be bound by those terms and conditions.

    Generally speaking, the software license restricts the mannerin which youare permitted to usethe softwareand may contain prohibitionsagainst certain uses. Thesoftwarelicense may state conditions under which the license is automatically terminated. You should consultthe license for further details.

    For complete product documentation, please see the Juniper NetworksWeb site at www.juniper.net/techpubs.

    Copyright 2011, Juniper Networks, Inc.ii

  • 8/6/2019 Hardware Ex 3200

    3/254

    END USER LICENSE AGREEMENT

    READ THIS END USER LICENSE AGREEMENT (AGREEMENT)BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE.BY DOWNLOADING, INSTALLING,OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TOTHE TERMSCONTAINED HEREIN, YOU (AS CUSTOMER OR IF YOU ARE NOT THECUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TOBIND THECUSTOMER) CONSENT TOBE BOUND BY THIS AGREEMENT. IFYOU DO NOT OR CANNOT AGREE TOTHE TERMS CONTAINEDHEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THESOFTWARE,AND (B) YOU MAY CONTACT JUNIPER NETWORKSREGARDING LICENSETERMS.

    1. The Parties. The parties to this Agreementare (i)Juniper Networks, Inc. (if theCustomers principal officeis located in the Americas) orJuniperNetworks(Cayman)Limited (ifthe Customers principaloffice is located outside theAmericas)(suchapplicable entity beingreferredtohereinas Juniper), and(ii) thepersonor organizationthatoriginally purchased from Juniperor an authorizedJuniperresellerthe applicablelicense(s) foruse of the Software(Customer) (collectively, the Parties).

    2. The Software. In this Agreement, Software means the program modules and features of theJuniper or Juniper-supplied software, forwhich Customerhas paidthe applicablelicense or support fees to Juniper or an authorized Juniper reseller, or which was embedded byJuniper in equipment which Customerpurchasedfrom Juniper or an authorized Juniper reseller. Software also includes updates, upgradesand new releases of such software. Embedded Software means Software which Juniperhas embedded in or loaded onto the Juniperequipment and any updates, upgrades, additions or replacements which are subsequently embedded in or loaded onto theequipment.

    3. License Grant. Subject topayment of theapplicablefees and the limitationsand restrictionssetforth herein, Juniper grants toCustomera non-exclusive and non-transferable license, without right to sublicense, to usethe Software, in executable form only,subject to thefollowinguse restrictions:

    a. Customershall useEmbedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased byCustomer fromJuniper or an authorized Juniper reseller.

    b. Customer shall usethe Software on a single hardware chassis having a single processing unit, or as many chassis or processing unitsfor which Customer haspaid the applicable license fees;provided, however, with respect to theSteel-Belted Radius or Odyssey AccessClient software only,Customershall usesuch Software on a single computer containing a single physical random accessmemory spaceand containing any numberof processors. Use of the Steel-Belted Radius or IMS AAA software on multiple computers or virtual machines(e.g., Solaris zones) requiresmultiple licenses, regardless of whether such computers or virtualizations are physically contained on a singlechassis.

    c. Product purchase documents, paper or electronic userdocumentation, and/or the particular licenses purchased by Customer may

    specify limits toCustomersuse ofthe Software.Suchlimitsmay restrictuse toa maximumnumber of seats,registered endpoints,concurrentusers, sessions, calls, connections, subscribers, clusters, nodes, realms, devices, links, portsor transactions, or require the purchase ofseparate licenses to use particular features, functionalities, services, applications, operations, or capabilities, or provide throughput,performance, configuration, bandwidth, interface, processing, temporal, or geographical limits. In addition, such limitsmay restrict the useof theSoftware to managing certain kinds of networksor require the Software to be used only in conjunctionwith other specific Software.Customers useof the Software shall be subject to all such limitations and purchase of all applicablelicenses.

    d. Forany trial copy of theSoftware, Customers right to usethe Software expires 30 days afterdownload, installation or useof theSoftware. Customer mayoperate the Softwareafter the 30-day trial period only if Customer pays for a license to do so.Customer may notextend or create an additional trial period by re-installing the Softwareafter the 30-day trial period.

    e. The Global Enterprise Editionof the Steel-Belted Radius software may be used by Customer only to manage access to Customersenterprisenetwork.Specifically, service provider customers are expressly prohibited fromusing the Global Enterprise Edition of theSteel-Belted Radiussoftware to support any commercialnetwork access services.

    The foregoing license is nottransferableor assignable by Customer. No license is granted herein toany user whodid notoriginally purchasethe applicable license(s) for the Software from Juniper or an authorized Juniper reseller.

    4. Use Prohibitions. Notwithstanding theforegoing, the license provided herein does not permit the Customer to, and Customer agreesnot to and shall not: (a)modify, unbundle, reverseengineer, or create derivative works based on theSoftware; (b)make unauthorizedcopies of the Software (except as necessary for backup purposes); (c)rent,sell, transfer, or grant any rights in and to any copy of theSoftware, in anyform, toany thirdparty; (d)removeany proprietarynotices,labels,or markson orin anycopyof theSoftware orany productin which the Software is embedded; (e) distribute any copy of theSoftware to anythird party, including as may be embedded in Juniperequipmentsold in thesecondhand market;(f) useany lockedor key-restricted feature, function,service, application, operation, orcapabilitywithout first purchasing the applicable license(s) and obtaining a valid key from Juniper,even if such feature, function, service, application,operation, or capability is enabled without a key; (g)distribute any key for theSoftware provided by Juniper to anythird party; (h)use the

    iiiCopyright 2011, JuniperNetworks, Inc.

  • 8/6/2019 Hardware Ex 3200

    4/254

    Software in any manner that extends or is broader than the uses purchasedby Customer from Juniper or an authorized Juniper reseller; (i)useEmbedded Softwareon non-Juniper equipment; (j) useEmbedded Software (or make it available for use) on Juniper equipment thatthe Customer did notoriginally purchase from Juniper or an authorized Juniper reseller; (k)disclosethe results of testing or benchmarkingof theSoftwareto anythirdpartywithout thepriorwritten consent of Juniper; or (l)use theSoftwarein anymanner other than asexpresslyprovided herein.

    5. Audit. Customershall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper,Customer shall furnish such records to Juniperand certify its compliancewith this Agreement.

    6. Confidentiality. The Parties agree that aspects of the Software and associated documentation arethe confidential property of Juniper.As such,Customershall exerciseall reasonable commercialeffortsto maintain the Softwareand associated documentation in confidence,which ata minimumincludesrestricting access to theSoftware toCustomeremployees andcontractorshaving a need to usethe Softwarefor Customers internal business purposes.

    7. Ownership. Juniperand Junipers licensors, respectively, retain ownership of all right, title, and interest(including copyright) in and tothe Software, associated documentation, and all copiesof the Software. Nothing in thisAgreement constitutes a transfer or conveyanceof anyright,title, or interestin theSoftwareor associated documentation, or a sale of the Software, associated documentation, or copiesof the Software.

    8. Warranty, Limitation of Liability, Disclaimer of Warranty. Thewarranty applicableto theSoftwareshall be as setforthin the warranty

    statementthat accompanies theSoftware(theWarrantyStatement).Nothingin thisAgreement shallgive riseto anyobligation tosupportthe Software. Support services may be purchased separately. Any such support shall be governed by a separate, written support servicesagreement. TOTHE MAXIMUM EXTENT PERMITTED BY LAW, JUNIPER SHALL NOT BE LIABLE FOR ANY LOST PROFITS, LOSS OF DATA,ORCOSTSORPROCUREMENTOFSUBSTITUTEGOODSORSERVICES,ORFORANYSPECIAL,INDIRECT,ORCONSEQUENTIALDAMAGESARISINGOUTOF THISAGREEMENT, THESOFTWARE,OR ANYJUNIPEROR JUNIPER-SUPPLIED SOFTWARE.IN NOEVENT SHALLJUNIPERBE LIABLE FOR DAMAGES ARISINGFROM UNAUTHORIZED OR IMPROPER USE OF ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE.EXCEPT AS EXPRESSLY PROVIDED IN THE WARRANTY STATEMENT TO THE EXTENTPERMITTED BY LAW, JUNIPER DISCLAIMS ANYAND ALL WARRANTIES IN AND TOTHE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE), INCLUDING ANYIMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOESJUNIPER WARRANT THAT THESOFTWARE,OR ANY EQUIPMENT OR NETWORK RUNNING THE SOFTWARE,WILL OPERATE WITHOUTERROR OR INTERRUPTION, OR WILL BE FREE OF VULNERABILITY TOINTRUSION OR ATTACK. In no eventshall Junipersor itssuppliersor licensors liability to Customer, whether in contract, tort (includingnegligence), breach of warranty, or otherwise, exceed theprice paidby Customer for the Software that gave rise to theclaim,or if theSoftwareis embedded in another Juniper product, the price paid byCustomer for such other product. Customeracknowledges and agreesthat Juniper hasset its prices and entered into this Agreementinreliance upon the disclaimers of warranty and thelimitations of liability setforthherein, that the same reflectan allocation of risk between

    the Parties (includingthe risk that a contractremedy may fail of its essential purpose and cause consequential loss), and that the sameform an essential basis of thebargain between the Parties.

    9. Termination. Any breachof this Agreement or failure by Customerto payany applicablefeesdue shall result in automatic terminationof thelicense granted herein. Upon such termination, Customer shall destroy or return to Juniper all copies of theSoftwareand relateddocumentation in Customers possession or control.

    10. Taxes. All license fees payable under this agreement are exclusive of tax. Customer shall be responsiblefor paying Taxes arisingfromthepurchaseof thelicense,or importation or useof theSoftware. If applicable, valid exemption documentation for each taxingjurisdictionshall be provided to Juniper prior to invoicing, and Customer shall promptly notify Juniper if their exemption is revoked or modified. Allpayments made by Customershall be netof any applicablewithholding tax. Customer willprovide reasonable assistance to Juniper inconnection withsuch withholding taxes by promptly: providing Juniper with valid taxreceipts and other required documentation showingCustomers payment of any withholding taxes; completingappropriate applications that would reduce the amountof withholding taxtobe paid; and notifying and assisting Juniper in any audit or taxproceeding related to transactions hereunder. Customer shall complywithall applicabletax laws and regulations, and Customer will promptly pay or reimburseJuniper for all costs and damages relatedto anyliability incurred by Juniper as a result of Customers non-compliance or delay withits responsibilities herein. Customers obligations underthis Section shall survive termination or expiration of thisAgreement.

    11. Export. Customeragrees to complywith all applicableexport laws and restrictions and regulations of any United States and anyapplicableforeign agency or authority, and notto export or re-export theSoftwareor any direct product thereof in violation of any suchrestrictions, laws or regulations, or withoutall necessary approvals. Customer shall be liablefor any such violations. The version of theSoftware supplied to Customer maycontain encryption or other capabilities restricting Customers ability to exportthe Softwarewithoutan export license.

    Copyright 2011, Juniper Networks, Inc.iv

  • 8/6/2019 Hardware Ex 3200

    5/254

    12. Commercial Computer Software. The Software is commercial computer software and is provided withrestricted rights. Use,duplication, or disclosure by the United States government is subject to restrictions setforthin this Agreement and as provided in DFARS227.7201 through 227.7202-4, FAR12.212, FAR27.405(b)(2), FAR 52.227-19, or FAR52.227-14(ALT III) as applicable.

    13. Interface Information. To the extent required by applicable law,and at Customer's written request, Juniper shall provideCustomerwith the interface information needed to achieve interoperabilitybetween the Softwareand another independently created program, onpayment of applicablefee,if any. Customershall observe strictobligationsof confidentialitywith respect to such information and shall usesuch information in compliance with anyapplicable terms and conditions upon which Juniper makes such information available.

    14. Third Party Software. Anylicensorof Juniper whose softwareis embedded in theSoftware andany supplier ofJuniper whose productsor technology areembedded in (or services are accessed by)the Softwareshallbe a third party beneficiary with respect tothis Agreement,andsuch licensor orvendor shall have therightto enforcethis Agreementin itsown name asif it were Juniper.In addition, certain third partysoftware maybe provided with the Softwareand is subject to the accompanying license(s), if any, of itsrespective owner(s). To the extentportions of theSoftwareare distributed under and subject to open source licenses obligatingJuniper to make thesource code forsuchportions publicly available (such as the GNU General Public License (GPL) or the GNU Library General Public License (LGPL)), Juniperwillmake such source code portions (includingJuniper modifications, as appropriate) available upon request for a period of up to threeyearsfrom the date of distribution. Such request canbe madein writing to Juniper Networks, Inc., 1194 N. Mathilda Ave., Sunnyvale, CA94089, ATTN: General Counsel. You mayobtaina copy of theGPL at http://www.gnu.org/licenses/gpl.html , and a copyof the LGPLat http://www.gnu.org/licenses/lgpl.html .

    15. Miscellaneous. This Agreement shall be governed by thelaws of the State of California without referenceto its conflictsof lawsprinciples. Theprovisions of the U.N. Convention for the International Sale of Goods shall notapply to this Agreement. Forany disputesarising under this Agreement, theParties hereby consent to the personal and exclusive jurisdiction of, and venue in, thestate and federalcourts withinSantaClara County,California. ThisAgreementconstitutes the entire and soleagreement between Juniper and the Customerwith respect to the Software, and supersedes all prior and contemporaneous agreements relating to the Software, whether oral or written(including any inconsistentterms contained in a purchase order), except that the terms of a separate written agreement executed by anauthorized Juniper representative and Customer shall govern to the extent such terms are inconsistentor conflict with terms containedherein. No modification to this Agreementnor anywaiver of any rights hereunder shall be effective unlessexpressly assentedto in writingby the party to be charged.If any portion of thisAgreement is held invalid, theParties agree that such invalidity shall not affect the validityof theremainder of this Agreement. This Agreement and associated documentation hasbeen written in the English language, and theParties agree that the Englishversion willgovern. (For Canada: Les parties auxprsents confirment leur volont quecette convention demme quetous les documentsy compris tout avis qui s'yrattach, soientredigs en langue anglaise.(Translation: The parties confirm thatthis Agreement and all related documentation is and willbe in the English language)).

    vCopyright 2011, JuniperNetworks, Inc.

    http://www.gnu.org/licenses/gpl.htmlhttp://www.gnu.org/licenses/gpl.htmlhttp://www.gnu.org/licenses/lgpl.htmlhttp://www.gnu.org/licenses/lgpl.htmlhttp://www.gnu.org/licenses/gpl.html
  • 8/6/2019 Hardware Ex 3200

    6/254

    Copyright 2011, Juniper Networks, Inc.vi

  • 8/6/2019 Hardware Ex 3200

    7/254

    Table of Contents

    About This Topic Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xix

    How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xixList of EX Series Guides for Junos OS Release 11.1 . . . . . . . . . . . . . . . . . . . . . . . . .xixDownloading Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxiDocumentation Symbols Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxiiDocumentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxiiiRequesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxiv

    Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxivOpening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxiv

    Part 1 Switch and Components Overview and SpecificationsChapter 1 EX3200 Switches Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

    EX3200 Switches Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Uplink Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Power over Ethernet (PoE) Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

    EX3200 Switch Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Chassis Physical Specifications for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . .5Front Panel of an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Rear Panel of an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7EX3200 Switch Hardware and CLI Terminology Mapping . . . . . . . . . . . . . . . . . . . .8

    Chapter 2 Component Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

    LCD Panel in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11LCD Panel Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12LCD Panel Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

    Field-Replaceable Units in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Chassis Status LEDs in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Network Port LEDs in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Management Port LEDs in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Power Supply in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

    AC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23DC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24PoE Power Budget and AC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . .25

    AC Power Supply LEDs in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26DC Power Supply LEDs in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Cooling System and Airflow in an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . .27Uplink Modules in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

    SFP Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30SFP+ Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

    viiCopyright 2011, JuniperNetworks, Inc.

  • 8/6/2019 Hardware Ex 3200

    8/254

    XFP Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

    Chapter 3 Component Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

    USB Port Specifications for an EX Series Switch . . . . . . . . . . . . . . . . . . . . . . . . . .33

    Network Port Connector Pinout Information for an EX3200 Switch . . . . . . . . . . .34Console Port Connector Pinout Information for an EX Series Switch . . . . . . . . . .35Management Port Connector Pinout Information for an EX3200 Switch . . . . . . .36Optical Interface Support in EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . .36SFP+ Direct Attach Cables for EX Series Switches . . . . . . . . . . . . . . . . . . . . . . . . .62

    Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63Standards Supported by These Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

    Uplink Modules Connector Pinout Information for EX3200 Switches . . . . . . . . . .65

    Part 2 Planning for Switch InstallationChapter 4 Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

    Site Preparation Checklist for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . .75General Site Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76Site Electrical Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77Environmental Requirements and Specifications for EX Series Switches . . . . . . .78

    Chapter 5 Mounting and Clearance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

    Rack Requirements for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81Cabinet Requirements for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82Requirements for Mounting an EX3200 Switch on a Desktop or Wall . . . . . . . . .83Clearance Requirements for Airflow and Hardware Maintenance for EX3200

    Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

    Chapter 6 Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

    Network Cable Specifications for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . .87

    Chapter 7 Planning Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

    Power Specifications for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89AC Power Cord Specifications for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . .90

    Part 3 Installing and Connecting the Switch and Switch ComponentsChapter 8 Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

    Installing and Connecting an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . .95Unpacking an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96Parts Inventory (Packing List) for an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . .97Mounting an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98Mounting an EX3200 Switch on a Desk or Other Level Surface . . . . . . . . . . . . . .99Mounting an EX3200 Switch on Two Posts in a Rack or Cabinet . . . . . . . . . . . .100Mounting an EX3200 Switch on Four Posts in a Rack or Cabinet . . . . . . . . . . . .103Mounting an EX3200 Switch in a Recessed Position in a Rack or Cabinet . . . . .106Mounting an EX3200 Switch on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

    Chapter 9 Installing Switch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

    Installing and Removing EX3200 Switch Hardware Components . . . . . . . . . . . .109Installing a Power Supply in an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . .110

    Copyright 2011, Juniper Networks, Inc.viii

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    9/254

  • 8/6/2019 Hardware Ex 3200

    10/254

    Part 6 Troubleshooting Switch ComponentsChapter 14 Troubleshooting Switch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

    Troubleshooting Network Interfaces on EX3200 Switches . . . . . . . . . . . . . . . . .167

    The interface on one of the last four built-in network ports in an EX3200switch (for example, interface ge-0/0/23) is down . . . . . . . . . . . . . . . .167

    The interface on the port in which an SFP or SFP+ transceiver is installedin an SFP+ uplink module is down . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

    Troubleshooting Uplink Module Installation or Replacement on EX3200Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168One of the last four network ports on an EX3200 switch with an SFP or

    SFP+ uplink module installed is disabled . . . . . . . . . . . . . . . . . . . . . . . .168A port on an SFP uplink module installed in an EX3200 switch is

    disabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

    Part 7 Returning HardwareChapter 15 Returning theSwitchor SwitchComponents . . . . . . . . . . . . . . . . . . . . . . . . .173

    Returning an EX3200 Switch or Component for Repair or Replacement . . . . . . .173Locating the Serial Number on an EX3200 Switch or Component . . . . . . . . . . .174

    Listing the Switch and Components Details with the CLI . . . . . . . . . . . . . . .174Locating the Chassis Serial Number ID Label on an EX3200 Switch . . . . . .174Locating the Serial Number ID Labels on FRUs in an EX3200 Switch . . . . . .175

    Contacting Customer Support to Obtain Return Materials Authorization for EXSeries Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

    Packing an EX3200 Switch or Component for Shipping . . . . . . . . . . . . . . . . . . . .176Packing an EX3200 Switch for Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177Packing EX3200 Switch Components for Shipping . . . . . . . . . . . . . . . . . . . .178

    Part 8 Safety InformationChapter 16 General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

    General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181Definitions of Safety Warning Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182Fire Safety Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184Qualified Personnel Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185Warning Statement for Norway and Sweden . . . . . . . . . . . . . . . . . . . . . . . . . . . .186

    Chapter 17 Radiation and Laser Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187

    Laser and LED Safety Guidelines and Warnings for EX Series Switches . . . . . . .187General Laser Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187Class 1 Laser Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188Class 1 LED Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188Laser Beam Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189

    Radiation from Open Port Apertures Warning . . . . . . . . . . . . . . . . . . . . . . . . . . .190

    Chapter 18 Installation and Maintenance Safety Information . . . . . . . . . . . . . . . . . . . .193

    Installation Instructions Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193Chassis Lifting Guidelines for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . .194Ramp Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195

    Copyright 2011, Juniper Networks, Inc.x

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    11/254

    Rack-Mounting and Cabinet-Mounting Warnings . . . . . . . . . . . . . . . . . . . . . . . .195Wall-Mounting Warning for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . .199Grounded Equipment Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200Maintenance and Operational Safety Guidelines and Warnings . . . . . . . . . . . . .201

    Jewelry Removal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201Lightning Activity Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202Operating Temperature Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203Product Disposal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204

    Chapter 19 Power and Electrical Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . .207

    General Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . .207Prevention of Electrostatic Discharge Damage . . . . . . . . . . . . . . . . . . . . . . . . . .208AC Power Electrical Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210AC Power Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211Multiple Power Supplies Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . .212DC Power Electrical Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213

    DC Power Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214DC Power Grounding Requirements and Warning . . . . . . . . . . . . . . . . . . . . . . . . .216DC Power Wiring Sequence Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217DC Power Wiring Terminations Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218TN Power Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220Action to Take After an Electrical Accident . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220

    Part 9 Compliance InformationChapter 20 Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225

    Agency Approvals for EX Series Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225Compliance Statements for EMC Requirements for EX Series Switches . . . . . .226

    Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227United States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227FCC Part 15 Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227Non-Regulatory Environmental Standards . . . . . . . . . . . . . . . . . . . . . . . . . .228

    Compliance Statements for Acoustic Noise for EX Series Switches . . . . . . . . . .228Declaration of Conformity for EX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . .229

    xiCopyright 2011, JuniperNetworks, Inc.

    Table of Contents

  • 8/6/2019 Hardware Ex 3200

    12/254

    Copyright 2011, Juniper Networks, Inc.xii

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    13/254

    List of Figures

    Part 1 Switch and Components Overview and SpecificationsChapter 1 EX3200 Switches Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

    Figure 1: EX3200 Switch with 48 Gigabit Ethernet Ports . . . . . . . . . . . . . . . . . . . . .6Figure 2: EX3200 Switch with 24 Gigabit Ethernet Ports . . . . . . . . . . . . . . . . . . . . .6Figure 3: EX3200 Switch Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

    Chapter 2 Component Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

    Figure 4: LCD Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Figure 5: Chassis Status LEDs in an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . .17Figure 6: LEDs on the Network Ports on the Front Panel . . . . . . . . . . . . . . . . . . . .18Figure 7: LEDs on the Uplink Module Ports on the SFP Uplink Module . . . . . . . . . .19Figure 8: LEDs on the Uplink Module Ports on the SFP+ Uplink Module . . . . . . . .19Figure 9: LEDs on the Uplink Module Ports on the XFP Uplink Module . . . . . . . . .19Figure 10: LEDs on the Management Port on an EX3200 Switch . . . . . . . . . . . . . .22Figure 11: 320 W AC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Figure 12: 600 W and 930 W AC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . .24Figure 13: DC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25Figure 14: Fan Tray Used in an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Figure 15: Airflow Through the EX3200 Switch Chassis . . . . . . . . . . . . . . . . . . . . .28Figure 16: SFP Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Figure 17: SFP+ Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Figure 18: XFP Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

    Part 2 Planning for Switch InstallationChapter 5 Mounting and Clearance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

    Figure 19: Clearance Requirements for Airflow and Hardware Maintenance forEX3200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

    Figure 20: Airflow Through the EX3200 Switch Chassis . . . . . . . . . . . . . . . . . . . .85

    Chapter 7 Planning Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

    Figure 21: AC Plug Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

    Part 3 Installing and Connecting the Switch and Switch ComponentsChapter 8 Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

    Figure 22: Unpacking an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97Figure 23: Attaching Rubber Feet to an EX3200 Switch Chassis . . . . . . . . . . . . .100Figure 24: Attaching the Mounting Bracket to the Side Panel of the Switch . . . .101Figure 25: Mounting the Switch on Two Posts in a Rack . . . . . . . . . . . . . . . . . . . .102Figure 26: Attaching the Front Bracket to the Side-Rail Bracket . . . . . . . . . . . . .104

    xiiiCopyright 2011, JuniperNetworks, Inc.

  • 8/6/2019 Hardware Ex 3200

    14/254

    Figure 27: Attaching the Side-Rail Bracket to the Switch Chassis . . . . . . . . . . . .104Figure 28: Mounting the Switch to the Front Posts in a Rack . . . . . . . . . . . . . . . .105Figure 29: Sliding the Rear Brackets to the Rear of a Four-Post Rack . . . . . . . . .105Figure 30: Attaching Wall-Mount Brackets to the Switch Chassis . . . . . . . . . . . .107Figure 31: Mounting the Switch on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

    Chapter 9 Installing Switch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

    Figure 32: Installing a Power Supply in an EX3200 Switch . . . . . . . . . . . . . . . . . . .111Figure 33: Installing a Fan Tray in an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . .112Figure 34: Installing an Uplink Module in an EX3200 Switch . . . . . . . . . . . . . . . . .114Figure 35: Installing a Transceiver in an EX Series Switch . . . . . . . . . . . . . . . . . . .116

    Chapter 10 Connecting the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

    Figure 36: Connecting a Grounding Cable to an EX Series Switch . . . . . . . . . . . . .117Figure 37: Connecting the Grounding Lug to an EX4200 Switch on a Four-Post

    Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120Figure 38: Connecting the AC Power Cord Retainer Clip to an AC Power Supply

    in an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125Figure 39: Connecting an AC Power Cord to an AC Power Supply in an EX3200

    Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125Figure 40: DC Power Supply in an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . .125Figure 41: Removing the Terminal Block Cover from a DC Power Supply . . . . . . .127Figure 42: Securing Ring Lugs to the Terminals on the DC Power Supply . . . . . .128Figure 43: Ethernet Cable Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129Figure 44: Connecting an EX Series Switch to a Network for Out-of-Band

    Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130Figure 45: Ethernet Cable Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131Figure 46: Connecting an EX Series Switch to a Management Console Through

    a Console Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

    Figure 47: Connecting an EX Series Switch Directly to a ManagementConsole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

    Figure 48: Ethernet Cable Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135Figure 49: Connecting a Fiber-Optic Cable to an Optical Transceiver Installed

    in an EX Series Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136

    Chapter 11 Performing Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

    Figure 50: LCD Panel in an EX3200, EX4200, EX4500, or EX8200 Switch . . . . .146

    Part 4 Removing Switch ComponentsChapter 12 Removing Switch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151

    Figure 51: Removing a Power Supply from the Switch . . . . . . . . . . . . . . . . . . . . . .153

    Figure 52: Removing a Fan Tray from an EX3200 Switch . . . . . . . . . . . . . . . . . . .154Figure 53: Sliding the Screwdriver to the Narrow Part of the Keyhole . . . . . . . . .156Figure 54: Removing an Uplink Module from an EX3200 Switch . . . . . . . . . . . . .156Figure 55: Removing a Transceiver from an EX Series Switch . . . . . . . . . . . . . . .158

    Part 7 Returning HardwareChapter 15 Returning theSwitchor SwitchComponents . . . . . . . . . . . . . . . . . . . . . . . . .173

    Figure 56: Location of the Serial Number ID Label on an EX3200 Switch . . . . . .174

    Copyright 2011, Juniper Networks, Inc.xiv

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    15/254

    Part 8 Safety InformationChapter 19 Power and Electrical Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . .207

    Figure 57: Place a Component into an Antistatic Bag . . . . . . . . . . . . . . . . . . . . .209

    xvCopyright 2011, JuniperNetworks, Inc.

    List of Figures

  • 8/6/2019 Hardware Ex 3200

    16/254

  • 8/6/2019 Hardware Ex 3200

    17/254

    List of Tables

    Part 1 Switch and Components Overview and SpecificationsChapter 1 EX3200 Switches Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

    Table 1: EX3200 Switch Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Table 2: Physical Specifications of the Switch Chassis . . . . . . . . . . . . . . . . . . . . . .5Table 3: CLI Equivalents of Terms Used in Documentation for EX3200

    Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

    Chapter 2 Component Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

    Table 4: LCD Panel Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Table 5: Chassis Status LEDs in an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . .17Table 6: Link/Activity LED on Network Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Table 7: Status LED on Network Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21Table 8: Link/Activity LED on the Management Port on EX3200 Switches . . . . . .22Table 9: Status LED on the Management Port on EX3200 Switches . . . . . . . . . .23Table 10: Power Supply Rating and PoE Power Budget for EX3200 Switch

    Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Table 11: AC Power Supply LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Table 12: DC Power Supply LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

    Chapter 3 Component Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

    Table 13: Network Port Connector Pinout Information . . . . . . . . . . . . . . . . . . . . . .34Table 14: EX Series Switches Console Port Connector Pinout Information . . . . . .35Table 15: Management Port Connector Pinout Information . . . . . . . . . . . . . . . . . .36Table 16: Optical Interface Support and Copper Interface Support for Gigabit

    Ethernet SFP Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Table 17: Optical Interface Support for Fast Ethernet SFP Transceivers . . . . . . . .48Table 18: Optical Interface Support for Gigabit Ethernet SFP+ Transceivers . . . .54Table 19: Optical Interface Support for Gigabit Ethernet XFP Transceivers . . . . .59Table 20: Software Support for SFP+ Direct Attach Cables Listed by Software

    Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63Table 21: SFP+ Direct Attach Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . .64Table 22: Uplink Modules Connector Pinout Information . . . . . . . . . . . . . . . . . . . .65

    Part 2 Planning for Switch InstallationChapter 4 Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

    Table 23: Site Preparation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75Table 24: Site Electrical Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78Table 25: EX Series Switch Environmental Tolerances . . . . . . . . . . . . . . . . . . . . . .79

    Chapter 5 Mounting and Clearance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

    xviiCopyright 2011, JuniperNetworks, Inc.

  • 8/6/2019 Hardware Ex 3200

    18/254

    Table 26: Rack Requirements and Specifications for the Switch . . . . . . . . . . . . . .81Table 27: Cabinet Requirements and Specifications for the Switch . . . . . . . . . . .83

    Chapter 7 Planning Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

    Table 28: AC Power Supply Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . .89Table 29: DC Power Supply Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . .89Table 30: AC Power Cord Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

    Part 3 Installing and Connecting the Switch and Switch ComponentsChapter 8 Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

    Table 31: Packing List for an EX3200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

    Chapter 10 Connecting the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

    Table 32: Port Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

    Copyright 2011, Juniper Networks, Inc.xviii

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    19/254

    About This Topic Collection

    How to Use This Guide on page xix List of EX Series Guides for Junos OS Release 11.1 on page xix Downloading Software on page xxi Documentation Symbols Key on page xxii Documentation Feedback on page xxiii Requesting Technical Support on page xxiv

    How to Use This Guide

    Complete documentation for the EX Series product family is provided on webpages athttp://www.juniper.net/techpubs/en_US/release-independent/information-products/pathway-pages/ex-series/product/index.html . We have selected content from thesewebpages and created a number of EX Series guides that collect related topics into abook-like format so that the information is easy to print and easy to download to yourlocal computer.

    Thisguide, CompleteHardware Guide for EX3200Switches , collects togetherinformation

    about the EX3200 fixed-configuration switches. The release notes are at http://www.juniper.net/techpubs/en_US/junos11.1/information-products/topic-collections/release-notes/11.1/junos-release-notes-11.1.pdf .

    List of EX Series Guides for Junos OS Release 11.1

    DescriptionTitle

    Component descriptions, sitepreparation, installation,replacement, and safety and compliance informationfor EX2200 Ethernetswitches

    Complete Hardware Guide for EX2200 Ethernet Switches

    Component descriptions, sitepreparation, installation,replacement, and safety and compliance informationfor EX3200 Ethernet switches

    Complete Hardware Guide for EX3200 Ethernet Switches

    Component descriptions, sitepreparation, installation,replacement, and safety and compliance informationfor EX4200 Ethernetswitches

    Complete Hardware Guide for EX4200 Ethernet Switches

    xixCopyright 2011, JuniperNetworks, Inc.

    http://www.juniper.net/techpubs/en_US/release-independent/information-products/pathway-pages/ex-series/product/index.htmlhttp://www.juniper.net/techpubs/en_US/release-independent/information-products/pathway-pages/ex-series/product/index.htmlhttp://www.juniper.net/techpubs/en_US/junos11.1/information-products/topic-collections/release-notes/11.1/junos-release-notes-11.1.pdfhttp://www.juniper.net/techpubs/en_US/junos11.1/information-products/topic-collections/release-notes/11.1/junos-release-notes-11.1.pdfhttp://www.juniper.net/techpubs/en_US/junos11.1/information-products/topic-collections/release-notes/11.1/junos-release-notes-11.1.pdfhttp://www.juniper.net/techpubs/en_US/junos11.1/information-products/topic-collections/release-notes/11.1/junos-release-notes-11.1.pdfhttp://www.juniper.net/techpubs/en_US/junos11.1/information-products/topic-collections/release-notes/11.1/junos-release-notes-11.1.pdfhttp://www.juniper.net/techpubs/en_US/junos11.1/information-products/topic-collections/release-notes/11.1/junos-release-notes-11.1.pdfhttp://www.juniper.net/techpubs/en_US/release-independent/information-products/pathway-pages/ex-series/product/index.htmlhttp://www.juniper.net/techpubs/en_US/release-independent/information-products/pathway-pages/ex-series/product/index.html
  • 8/6/2019 Hardware Ex 3200

    20/254

    DescriptionTitle

    Component descriptions, sitepreparation, installation,replacement, and safety and compliance informationfor EX4500 Ethernet switches

    Complete Hardware Guide for EX4500 Ethernet Switches

    Component descriptions, sitepreparation, installation,replacement, and safety and compliance informationfor EX8208 Ethernetswitches

    Complete Hardware Guide for EX8208 Ethernet Switches

    Component descriptions, sitepreparation, installation,replacement, and safety and compliance informationfor EX8216 Ethernetswitches

    Complete Hardware Guide for EX8216 Ethernet Switches

    Component descriptions, sitepreparation, installation,replacement, and safety and compliance informationfor theXRE200 External Routing Engine

    Complete Hardware Guide for the XRE200 External Routing Engine

    Softwarefeaturedescriptions,configurationexamples,and tasks forJunos OS for EX Series switches

    Complete Software Guide for JUNOS OS for EX Series Ethernet Switches, Release 11.1

    Software feature descriptions, configurationexamplesand tasks, and reference pages for configurationstatementsand operational commands (Thisinformation also appears in the Complete SoftwareGuide for JUNOS OS for EX Series Ethernet Switches,Release 11.1 .)

    Software Topic Collections

    JUNOS OS forEX Series Ethernet Switches,Release 11.1: AccessControl

    JUNOS OS for EX Series Ethernet Switches, Release 11.1: Configuration

    Management

    JUNOS OS forEX Series EthernetSwitches, Release 11.1: Class of Service

    JUNOS OS forEX Series EthernetSwitches, Release11.1: Device Security

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: Ethernet Switching

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: EX4200 and EX4500 Virtual Chassis

    JUNOS OS forEX Series EthernetSwitches, Release 11.1: EX8200Virtual

    Chassis

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: Fibre Channelover Ethernet

    JUNOS OS forEX Series EthernetSwitches, Release 11.1: HighAvailability

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: Interfaces

    Copyright 2011, Juniper Networks, Inc.xx

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    21/254

    DescriptionTitle

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: Layer 3Protocols

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: MPLS

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: Multicast

    JUNOS OS forEX Series Switches, Release 11.1: Network Management and Monitoring

    JUNOS OS forEX Series Switches, Release 11.1: Port Security

    JUNOS OS forEX SeriesEthernetSwitches, Release 11.1: Routing Policy and Packet Filtering

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: SoftwareInstallation

    JUNOS OS for EX Series Ethernet Switches,Release 11.1: Spanning-TreeProtocols

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: SystemMonitoring

    JUNOS OS forEX SeriesEthernet Switches,Release 11.1: System Services

    JUNOS OS forEX Series Ethernet Switches, Release 11.1: System Setup

    JUNOS OS forEX Series EthernetSwitches, Release 11.1: Userand AccessManagement

    JUNOS OS forEX Series Ethernet Switches,Release 11.1: UserInterfaces

    Downloading Software

    You can download Junos OS for EX Series switches from the Download Software areaat http://www.juniper.net/customers/support/ . To download the software, you musthave a Juniper Networks user account. For information about obtaining an account, seehttp://www.juniper.net/entitlement/setupAccountInfo.do .

    xxiCopyright 2011, JuniperNetworks, Inc.

    About This Topic Collection

    http://www.juniper.net/customers/support/http://www.juniper.net/entitlement/setupAccountInfo.dohttp://www.juniper.net/entitlement/setupAccountInfo.dohttp://www.juniper.net/customers/support/
  • 8/6/2019 Hardware Ex 3200

    22/254

    Documentation Symbols Key

    Notice Icons

    DescriptionMeaningIcon

    Indicates important features or instructions.Informational note

    Indicates a situation that might result in loss of data or hardwaredamage.

    Caution

    Alerts you to the risk of personal injury or death.Warning

    Alerts you to the risk of personal injury from a laser.Laser warning

    Text and Syntax Conventions

    ExamplesDescriptionConvention

    To enter configuration mode, type theconfigure command:

    user@host>configure

    Represents text that you type.Bold text like this

    user@host> show chassis alarms

    No alarms currently active

    Representsoutput that appears on theterminal screen.

    Fixed-width text like this

    Apolicy term isanamedstructurethatdefinesmatchconditionsandactions.

    Junos OS System Basics ConfigurationGuide

    RFC 1997, BGP Communities Attribute

    Introduces important new terms. Identifies book names. Identifies RFCand Internetdraft titles.

    Italic text like this

    Configure the machines domain name:

    [edit]

    root@# set system domain-namedomain-name

    Represents variables (options for whichyou substitute a value) in commands orconfiguration statements.

    Italic text like this

    To configure a stub area, include thestub statement at the [edit protocolsospf areaarea-id] hierarchy level.

    Theconsoleport is labeled CONSOLE .

    Represents names of configurationstatements, commands, files, anddirectories; IP addresses; configurationhierarchy levels; or labels on routingplatform components.

    Plain text like this

    stub ;Enclose optional keywords or variables.< > (anglebrackets)

    Copyright 2011, Juniper Networks, Inc.xxii

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    23/254

    Text and Syntax Conventions

    ExamplesDescriptionConvention

    broadcast | multicast

    ( string1 | string2 | string3 )

    Indicates a choice betweenthemutuallyexclusive keywords or variableson eitherside of the symbol. The set of choices isoften enclosedin parenthesesforclarity.

    | (pipe symbol)

    rsvp { # Required fordynamic MPLS onlyIndicates a commentspecified on thesamelineas theconfigurationstatementto which it applies.

    # (pound sign)

    communityname members[community-ids ]

    Enclose a variable for which youcansubstitute one or more values.

    [ ] (square brackets)

    [edit]

    routing-options {static{route default {

    nexthop address ;retain;

    }}

    }

    Identify a level in the configuration

    hierarchy.

    Indention and braces ( { } )

    Identifies a leaf statement at aconfiguration hierarchy level.

    ; (semicolon)

    J-Web GUI Conventions

    In theLogical Interfacesbox, select AllInterfaces .

    To cancel the configuration, clickCancel .

    Represents J-Web graphical userinterface (GUI) itemsyou click or select.

    Bold text like this

    In the configuration editor hierarchy,select Protocols>Ospf .

    Separates levels in a hierarchy of J-Webselections.

    > (bold right angle bracket)

    Documentation Feedback

    We encourage you to provide feedback, comments, and suggestions so that we canimprove the documentation. Send e-mail to techpubs-comments@juniper.net with thefollowing:

    Document URL or title Page number if applicable

    Software version

    Your name and company

    xxiiiCopyright 2011, JuniperNetworks, Inc.

    About This Topic Collection

    http://techpubs-comments@juniper.net/http://techpubs-comments@juniper.net/
  • 8/6/2019 Hardware Ex 3200

    24/254

    Requesting Technical Support

    Technicalproduct supportis available throughthe JuniperNetworks TechnicalAssistanceCenter (JTAC). If you are a customer with an active J-Care or JNASC support contract,or are covered under warranty, and need post-sales technical support, you can accessour tools and resources online or open a case with JTAC.

    JTAC policiesFor a complete understanding of our JTAC procedures and policies,review the JTAC User Guide located at http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf .

    ProductwarrantiesForproduct warranty information,visit http://www.juniper.net/support/warranty/ .

    JTAC hours of operationThe JTAC centers have resources available 24 hours a day,7 daysa week, 365 days a year.

    Self-Help Online Tools and Resources

    For quick and easy problem resolution, Juniper Networks has designed an onlineself-service portal called the Customer Support Center (CSC) that provides you with thefollowing features:

    Find CSC offerings: http://www.juniper.net/customers/support/

    Search for known bugs: http://www2.juniper.net/kb/

    Find product documentation: http://www.juniper.net/techpubs/

    Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/

    Download the latest versions of software and review release notes: http://www.juniper.net/customers/csc/software/

    Search technical bulletins for relevant hardware and software notifications: https://www.juniper.net/alerts/

    Join and participate in the Juniper Networks Community Forum: http://www.juniper.net/company/communities/

    Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/

    To verify serviceentitlementbyproductserialnumber, useourSerial Number Entitlement(SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/

    Opening a Case with JTACYou can open a case with JTAC on the Web or by telephone.

    Use the Case Management tool in the CSC at http://www.juniper.net/cm/ .

    Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).

    For international or direct-dial options in countries without toll-free numbers, see http://www.juniper.net/support/requesting-support.html .

    Copyright 2011, Juniper Networks, Inc.xxiv

    Complete Hardware Guide forEX3200 Ethernet Switches

    http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdfhttp://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdfhttp://www.juniper.net/support/warranty/http://www.juniper.net/support/warranty/http://www.juniper.net/customers/support/http://www2.juniper.net/kb/http://www.juniper.net/techpubs/http://kb.juniper.net/http://www.juniper.net/customers/csc/software/http://www.juniper.net/customers/csc/software/https://www.juniper.net/alerts/https://www.juniper.net/alerts/http://www.juniper.net/company/communities/http://www.juniper.net/company/communities/http://www.juniper.net/cm/https://tools.juniper.net/SerialNumberEntitlementSearch/http://www.juniper.net/cm/http://www.juniper.net/support/requesting-support.htmlhttp://www.juniper.net/support/requesting-support.htmlhttp://www.juniper.net/support/requesting-support.htmlhttp://www.juniper.net/support/requesting-support.htmlhttp://www.juniper.net/cm/https://tools.juniper.net/SerialNumberEntitlementSearch/http://www.juniper.net/cm/http://www.juniper.net/company/communities/http://www.juniper.net/company/communities/https://www.juniper.net/alerts/https://www.juniper.net/alerts/http://www.juniper.net/customers/csc/software/http://www.juniper.net/customers/csc/software/http://kb.juniper.net/http://www.juniper.net/techpubs/http://www2.juniper.net/kb/http://www.juniper.net/customers/support/http://www.juniper.net/support/warranty/http://www.juniper.net/support/warranty/http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdfhttp://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf
  • 8/6/2019 Hardware Ex 3200

    25/254

    PART 1

    Switch and Components Overview andSpecifications

    EX3200 Switches Overview on page 3 Component Descriptions on page 11 Component Specifications on page 33

    1Copyright 2011, JuniperNetworks, Inc.

  • 8/6/2019 Hardware Ex 3200

    26/254

    Copyright 2011, Juniper Networks, Inc.2

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    27/254

    CHAPTER 1

    EX3200 Switches Overview

    EX3200 Switches Hardware Overview on page 3 EX3200 Switch Models on page 4 Chassis Physical Specifications for EX3200 Switches on page 5 Front Panel of an EX3200 Switch on page 6 Rear Panel of an EX3200 Switch on page 7 EX3200 Switch Hardware and CLI Terminology Mapping on page 8

    EX3200 Switches Hardware Overview

    Juniper Networks EX Series Ethernet Switches provide scalable connectivity for theenterprise market, including branch offices, campus locations, and data centers. Theswitches run the Juniper Networks Junos operating system (Junos OS), which providesLayer 2 and Layer 3 switching, routing, and security services. The same Junos OS codebase thatruns on EX Series switches also runs on all Juniper Networks J Series, M Series,MX Series, and T Series routers.

    EX3200 Switches on page 3 Uplink Modules on page 4 Power over Ethernet (PoE) Ports on page 4

    EX3200 Switches

    Juniper Networks EX3200 Ethernet Switches provide connectivity for low-densityenvironments. Typically, you deploy these switches in branch environments or wiringclosets where only one switch is required.

    EX3200 switches are available in models with either 24 or 48 ports and with either all

    ports equipped for Power over Ethernet (PoE) or only 8 ports equipped for PoE. EX3200switches with a DC power supply installed do not provide PoE. All models provide portsthathave 10/100/1000Base-T Gigabit Ethernet connectors and optional 1-gigabit smallform-factor pluggable(SFP) transceivers,10-gigabit small form-factor pluggable(SFP+)transceivers, or 10-gigabit small form-factor pluggable (XFP) transceivers for use withfiber connections.

    EX3200 switches include:

    3Copyright 2011, JuniperNetworks, Inc.

  • 8/6/2019 Hardware Ex 3200

    28/254

    A field-replaceable power supply and an optional additionalconnection to an externalpower source.

    A field-replaceable fan tray with single fan.

    Junos OS with its modular design that enables failed system processes to gracefullyrestart.

    EX3200 switches have these features:

    Run Junos OS for EX Series switches

    Have options of 24-port and 48-port models

    Have options of full (all ports)or partial (8ports)PoweroverEthernet(PoE) capability

    Have optional uplink modules that provide connection to distribution switches

    Uplink Modules

    Optional uplink modules are available for all EX3200 switches. Uplink modules providetwo 10-gigabit small form-factor pluggable (XFP) transceivers, four 1-gigabit smallform-factor pluggable (SFP)transceivers, or two10-gigabit small form-factor pluggable(SFP+) transceivers. You can use XFP, SFP, or SFP+ ports to connect an access switchto a distribution switch.

    Power over Ethernet (PoE) Ports

    PoE portsprovide electrical current todevices through thenetworkcablesso that separatepowercords for devices such as IP phones, wireless access points, and security camerasare unnecessary. EX3200 switches with an AC power supply installed have options offull (all 24 or 48 ports) or partial (8 ports) PoE capability. EX3200 switches with a DC

    power supply installed do not provide PoE.Full PoE models are primarily used in IP telephony environments. Partial PoE models areused in environments where, for example, only a few ports for wireless access points orsecurity cameras are required.

    RelatedDocumentation

    EX3200 Switch Models on page 4

    Field-Replaceable Units in EX3200 Switches on page 16

    Site Preparation Checklist for EX3200 Switches on page 75

    EX3200 Switch Models

    TheEX3200switch isavailablewith24 or48 portswithpartial orfull Power overEthernet(PoE) capability. EX3200switches with a DC powersupply installed do notprovide PoE.Table 1 on page 5 lists the EX3200 switch models.

    Copyright 2011, Juniper Networks, Inc.4

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    29/254

    Table 1: EX3200 Switch Models

    Power Supply(Minimum)

    Number ofPoE-enabled PortsAccessPortsTypical DeploymentModel

    320 WFirst 8 ports24 Gigabit EthernetAccess or Distributionswitch

    EX3200-24T

    320 WFirst 8 ports48 Gigabit EthernetAccess or Distributionswitch

    EX3200-48T

    600 WAll 24ports24 Gigabit EthernetAccess switchEX3200-24P

    930 WAll 48 ports48 Gigabit EthernetAccess switchEX3200-48P

    190 W024 Gigabit EthernetAccess or Distributionswitch

    EX3200-24T-DC

    190 W048 Gigabit EthernetAccess or DistributionswitchEX3200-48T-DC

    RelatedDocumentation

    Front Panel of an EX3200 Switch on page 6

    Rear Panel of an EX3200 Switch on page 7

    EX3200 Switches Hardware Overview on page 3

    Chassis Physical Specifications for EX3200 Switches

    The EX3200 switch chassis is a rigid sheet-metal structure that houses the hardwarecomponents. Table 2 on page 5 summarizes the physical specifications of the EX3200switch chassis.

    Table 2: Physical Specifications of the Switch Chassis

    ValueDescription

    1.75 in. (4.45 cm)Chassis height

    17.25in. (43.82 cm) 19 in. (48.2 cm) with mounting brackets attached

    Chassis width

    Without power supply installed17 in. (43.18cm) With power supply installed:

    320 W AC power supply or 190W DC power supplyinstalled17 in. (43.18 cm) 600W or 930 W AC power supply installed19.25 in. (48.9 cm)

    Chassis depth

    320 W ACpower supply: 2.5 lb (1.1kg) 600 W and 930 W ACpower supplies: 3.1 lb (1.4kg) 190 W DC power supply: 2.5 lb (1.1kg)

    Weight

    5Copyright 2011, JuniperNetworks, Inc.

    Chapter 1: EX3200 Switches Overview

  • 8/6/2019 Hardware Ex 3200

    30/254

    NOTE: The weight of an EX3200 switch with one power supply installed isbetween 1517 lb (6.87.7 kg).

    RelatedDocumentation

    Rack Requirements for EX3200 Switches on page 81

    Cabinet Requirements for EX3200 Switches on page 82

    Mounting an EX3200 Switch on page 98

    Installing and Connecting an EX3200 Switch on page 95

    Installing and Removing EX3200 Switch Hardware Components on page 109

    Front Panel of an EX3200 Switch

    The front panel of an EX3200 switch consists of the following components: 10/100/1000Base-TGigabitEthernetports,someorallofwhichareenabledforPower

    over Ethernet (PoE)

    Uplink module portsSFP, SFP+, or XFP ports (Installing the uplink module is anoptional feature.)

    LCD panel and the LCD navigation buttons

    Chassis status LEDs

    Network port LEDs

    Figure 1 on page6 shows the front panel of an EX3200 switch with 48 Gigabit Ethernet

    ports. Figure 2 on page 6 shows the front panel of an EX3200 switch with 24 GigabitEthernet ports. Models are available that have either all ports equipped for Power overEthernet (PoE) or only 8 ports equipped for PoE. All ports have 10/100/1000Base-TGigabit Ethernet connectors.

    Figure 1: EX3200 Switch with 48 Gigabit Ethernet Ports

    Figure 2: EX3200 Switch with 24 Gigabit Ethernet Ports

    Copyright 2011, Juniper Networks, Inc.6

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    31/254

  • 8/6/2019 Hardware Ex 3200

    32/254

  • 8/6/2019 Hardware Ex 3200

    33/254

    Table 3: CLI Equivalents of Terms Used in Documentation for EX3200 Switches (continued)

    AdditionalInformationItem inDocumentationValue (CLI)Description (CLI)HardwareItem (CLI)

    Front Panel of anEX3200 Switch onpage 6

    Built-in network portson the front panel ofthe switch

    PIC 0Oneof the following:

    24x 10/100/1000Base-T

    48x 10/100/1000Base-T

    Uplink Modules inEX3200 Switches onpage 29

    Uplink moduleinstalled on the frontpanel of the switch

    PIC 1Oneof the following:

    2x 10GE SFP+ 4xGE SFP 2x10 GEXFP

    Optical InterfaceSupport in EX3200Switches on page 36

    Optical transceivers n is a value equivalenttothe number of theport in which thetransceiver is installed.

    Abbreviated name ofthe transceiverXcvr ( n)

    Power Supply inEX3200 Switches onpage 23

    AC or DC power supplyValue of n is always 0.Thevaluecorrespondsto the power supplyslot number.

    Oneof the following:

    PS320WAC PS600W AC PS930W AC PS190W DC

    Power supply ( n)

    Cooling SystemandAirflow in an EX3200

    Switch on page 27

    FantrayFantrayFan tray

    RelatedDocumentation

    EX Series Switches Hardware and CLI Terminology Mapping

    EX3200 Switches Hardware Overview on page 3

    9Copyright 2011, JuniperNetworks, Inc.

    Chapter 1: EX3200 Switches Overview

  • 8/6/2019 Hardware Ex 3200

    34/254

    Copyright 2011, Juniper Networks, Inc.10

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    35/254

    CHAPTER 2

    Component Descriptions

    LCD Panel in EX3200 Switches on page 11 Field-Replaceable Units in EX3200 Switches on page 16 Chassis Status LEDs in EX3200 Switches on page 17 Network Port LEDs in EX3200 Switches on page 18 Management Port LEDs in EX3200 Switches on page 22 Power Supply in EX3200 Switches on page 23 AC Power Supply LEDs in EX3200 Switches on page 26 DC Power Supply LEDs in EX3200 Switches on page 27 Cooling System and Airflow in an EX3200 Switch on page 27 Uplink Modules in EX3200 Switches on page 29

    LCD Panel in EX3200 Switches

    The LCD panel on the front panel of the switchshows two lines of text, eacha maximumof 16 characters in length. The LCD panel displays a variety of information about theswitch and also provides a menu to perform basic operations such as initial setup andreboot.

    There are two navigation buttons Menu and Enter to the right of the LCD panel.

    See Figure4 on page11 .

    Figure 4: LCD Panel

    You can configure the second line of the LCD panel to display a custom message. If theLCD panel is configured to display a custom message, the Menu button and the Enterbuttonaredisabled.See Configuring theLCDPanelonEXSeriesSwitches(CLI Procedure).

    11Copyright 2011, JuniperNetworks, Inc.

  • 8/6/2019 Hardware Ex 3200

    36/254

    TheLCD panel has a backlight. If theLCD panel is idle for 60 seconds, thebacklight turnsoff. Youcan turn on thebacklight bypressingthe Menu or Enter button once. After turningon the backlight, you can toggle between the LCD panel menus by pressing the Menubutton and navigate through the menu options by pressing the Enter button.

    NOTE: Thechassisviewerin theJ-Web interfacealsodisplays theLCD panel.From the J-Web interface, youcan view real-time status information in theLCD panel. See Dashboard forEX Series Switches.

    This topic describes:

    LCD Panel Modes on page 12 LCD Panel Menus on page 13

    LCD Panel Modes

    The LCD panel operates in four modes: boot, idle, status, and maintenance.

    TheLCD panel operates in boot mode duringswitch reboot. Theboot mode displays thekey milestones in the switch boot process. The boot mode does not have any menuoptions. After the boot process is complete, the LCD panel automatically reverts to theIdle menu.

    In an EX3200 switch, the first line of the LCD panel displays the hostname.

    In the idle mode, thesecondline displays themode of thenetwork ports Status LEDandthe number of chassis alarms. The number of alarms is updated every second.

    In the status mode, the second line displays:

    Status of the power supply

    Status of the fan and temperature

    Version of Junos OS for EX Series switches loaded on the switch

    In the maintenance mode, the secondline displays one of the following options that youcan use to configure and troubleshoot the switch:

    System halt

    System reboot

    Load rescue

    Factory default

    System EZSetup

    Copyright 2011, Juniper Networks, Inc.12

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    37/254

    LCD Panel Menus

    TheLCD panel has three menus: Idle, Status, andMaintenance. Toggle between theLCDpanelmenusbypressingthe Menu button. Navigatethrough themenuoptions bypressingthe Enter button.

    Table 4 on page 13 describes the LCD panel menu options.

    Table 4: LCD Panel Menu Options

    DescriptionMenu

    In theIdle menu:

    Press Enter to cycle through the Status LED modes: ADM (administrative status) DPX (duplex) PoE (Power over Ethernet) SPD (speed)See Network Port LEDs in EX3200 Switches on page 18 or Network Port LEDs in EX4200Switches forinformation on the Status LEDmodes.

    Press Menu toexitthe Idlemenu and go tothe Status menu.

    IDLE

    13Copyright 2011, JuniperNetworks, Inc.

    Chapter 2: Component Descriptions

  • 8/6/2019 Hardware Ex 3200

    38/254

  • 8/6/2019 Hardware Ex 3200

    39/254

    Table 4: LCD Panel Menu Options (continued)

    DescriptionMenu

    The Maintenance menu has the following options to configure and troubleshoot the switch: SYSTEM HALT?Choose one of the following:

    Press the Enter button to halt the switch. Press the Enter button again to confirm the halt. Press the Menu button to go to thenext option in the Maintenance menu.

    SYSTEM REBOOT?Choose one of the following:

    Press the Enter button to reboot the switch. Press the Enter button again to confirm the reboot. Press the Menu button to go to thenext option in the Maintenance menu.

    LOAD RESCUE?Choose one of the following:

    Press the Enter button to roll back theswitch to therescue configuration. Press the Enter button againto confirm the rollback.

    Press the Menu button to go to thenext option in the Maintenance menu. REQUEST VC PORT?Choose one of the following:

    Press the Enter button to configure an uplinkmodule port or an EX4200-24F network port to be a VirtualChassis port (VCP) or to delete a VCP from the switch configuration (when you delete the VCP, the portis reset to an uplink module port or an EX4200-24F network port).

    NOTE: This optionis available only foran EX4200switch that is a member of a Virtual Chassis configuration.It is not available for an EX3200 switch.

    Press the Menu button to go to thenext option in the Maintenance menu.

    FACTORY DEFAULT?Choose one of the following:

    Press the Enter button to restore the switch to the factory default configuration. Press the Enter buttonagain to confirm the restoration.

    Press the Menu button to go to thenext option in the Maintenance menu.

    ENTER EZSETUP?Choose one of the following:

    Press the Enter button to launch EZSetup. Press the Enter button again to confirm thelaunch.

    NOTE: You can use the ENTER EZSETUP option only if the switch is in the factory default configuration.

    ForinformationaboutEZSetup, see Connectingand ConfiguringanEX Series Switch(J-WebProcedure)on page145 .

    Press the Menu button to go to thenext option in the Maintenance menu.

    EXIT MAINT MENU?Choose one of the following:

    Press the Enter button toexit theMaintenancemenu.Thenpress the Menu button togo to theIdlemenu. Press the Menu button to go to theSystem Halt option.

    If youdo notwant usersto useMaintenancemenuoptions, disable theentiremenuor individualmenu options.See Configuring theLCD Panel on EX Series Switches (CLI Procedure).

    MAINT(MaintenanceMenu)

    RelatedDocumentation

    Front Panel of an EX3200 Switch on page 6

    Field-Replaceable Units in EX3200 Switches on page 16

    Connecting and Configuring an EX Series Switch (CLI Procedure) on page 143

    15Copyright 2011, JuniperNetworks, Inc.

    Chapter 2: Component Descriptions

  • 8/6/2019 Hardware Ex 3200

    40/254

    Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 145

    Field-Replaceable Units in EX3200 Switches

    Field-replaceable units (FRUs) are components that you can replace at your site. TheFRUs in the switch are:

    Power supply

    Fan tray

    Uplink module

    SFP transceiver

    SFP+ transceiver

    XFP transceiver

    NOTE: Uplink modules are not part of the standard package and must beordered separately.

    The power supply, fan tray, uplink module, and transceivers are hot-removable andhot-insertable: You can remove and replace them without powering off the switch ordisrupting switch functions.

    NOTE: If you have a Juniper J-Care service contract, register any addition,change, or upgrade of hardware components at https://www.juniper.net/customers/csc/management/updateinstallbase.jsp . Failure todo so can resultinsignificant delays if you need replacement parts. This note applies if youchangethe type of power supplyor add a new type of uplink module. It doesnotapplyifyoureplacethesecomponentswiththesametypeofcomponent.

    RelatedDocumentation

    Uplink Modules in EX3200 Switches on page 29

    Installing a Power Supply in an EX3200 Switch on page 110

    Removing a Power Supply from an EX3200 Switch on page 152

    Installing a Fan Tray in an EX3200 Switch on page 111

    Removing a Fan Tray from an EX3200 Switch on page 153 Installing an Uplink Module in an EX3200 Switch on page 112

    Removing an Uplink Module from an EX3200 Switch on page 154

    Installing a Transceiver in an EX Series Switch on page 115

    Removing a Transceiver from an EX Series Switch on page 156

    Copyright 2011, Juniper Networks, Inc.16

    Complete Hardware Guide forEX3200 Ethernet Switches

    https://www.juniper.net/customers/csc/management/updateinstallbase.jsphttps://www.juniper.net/customers/csc/management/updateinstallbase.jsphttps://www.juniper.net/customers/csc/management/updateinstallbase.jsphttps://www.juniper.net/customers/csc/management/updateinstallbase.jsp
  • 8/6/2019 Hardware Ex 3200

    41/254

    Chassis Status LEDs in EX3200 Switches

    The front panel of an EX3200 switch has three LEDs on the far right side of the panel,next to the LCD panel (see Figure 5 on page 17 ).

    Figure 5: Chassis Status LEDs in an EX3200 Switch

    Table 5 on page 17 describes the chassis status LEDs in an EX3200 switch, their colorsand states, and the status they indicate. You can view the colors of the three LEDsremotely through the CLI by issuing the operational mode command show chassis lcd.

    Table 5: Chassis Status LEDs in an EX3200 Switch

    State and DescriptionColorLED Label

    There is no alarm.UnlitALM (Alarm)

    There is a major alarm.

    NOTE: When you connect power to the switch, the Alarm(ALM) LEDlights red. Plugging an active Ethernetcable intothe management (MGMT) port on the switch completes thenetwork link and turns off the ALM LED.(See Connecting anEX Series Switchto a Networkfor Out-of-Band Management

    on page128 .)Connecting the switch to a dedicated management consoleinstead of a network does not affectthe ALM LED.The LEDremains reduntil the switch is connected to a network.

    Red

    There is a minor alarm.

    NOTE: The Alarm (ALM) LED lights amber if you commit aconfiguration tomake it activeon theswitch, butdo notcreatea rescueconfiguration to back it up. To save themost recentlycommitted configuration as the rescue configuration, enterthe operational modecommand request system configurationrescue save .

    Amber

    On steadilyJunos OS for EX Series switches has beenloaded on theswitch.

    BlinkingThe switch is booting.

    GreenSYS (System)

    This LED is always on and is meaningful only on EX4200switches.

    GreenMST (Master)

    A major alarm (red) indicates a critical error condition that requires immediate action.

    17Copyright 2011, JuniperNetworks, Inc.

    Chapter 2: Component Descriptions

  • 8/6/2019 Hardware Ex 3200

    42/254

    A minor alarm (amber) indicates a noncritical condition that requires monitoring ormaintenance. A minor alarm that is left unchecked might cause interruption in service orperformance degradation.

    NOTE: The amberglowof theAlarm LEDthatindicates a minoralarmcloselyresembles the redglow that indicates a major alarm.

    All three LEDs can be lit simultaneously.

    RelatedDocumentation

    Front Panel of an EX3200 Switch on page 6

    Checking Active Alarms with the J-Web Interface

    Understanding Alarm Types and Severity Levels on EX Series Switches

    Network Port LEDs in EX3200 Switches

    Each network port on the switch has two LEDs. The four figures in this topic show thelocation of those LEDs:

    Figure 6 on page 18 shows the location of the LEDs on the network ports on the frontpanel.

    Figure 7 on page 19 shows the location of the LEDs on the uplink module ports on theSFP uplink module.

    Figure 8 on page 19 shows the location of the LEDs on the uplink module ports on theSFP+ uplink module.

    Figure 9 on page 19 shows the location of the LEDs on the uplink module ports on theXFP uplink module.

    Figure 6: LEDs on the Network Ports on the Front Panel

    Copyright 2011, Juniper Networks, Inc.18

    Complete Hardware Guide forEX3200 Ethernet Switches

  • 8/6/2019 Hardware Ex 3200

    43/254

    Figure 7: LEDs on the Uplink Module Ports on the SFP Uplink Module

    Figure 8: LEDs on the Uplink Module Ports on the SFP+ Uplink Module

    Figure 9: LEDs on the Uplink Module Ports on the XFP Uplink Module

    g 0 2 0 1 0 8

    Link/ActivityLED

    Link/ActivityLED

    Status LED Status LED

    Port 0 Port 1

    19Copyright 2011, JuniperNetworks, Inc.

    Chapter 2: Component Descriptions

  • 8/6/2019 Hardware Ex 3200

    44/254

  • 8/6/2019 Hardware Ex 3200

    45/254

    Table 7: Status LED on Network Ports

    State and DescriptionLCD IndicatorLED

    Indicates the administrativestatus (enabled or disabled). Thestatus indicators are:

    GreenAdministrative status enabled. UnlitAdministrative status disabled.

    LED: ADMStatus

    Indicates the duplex mode.

    The uplink module ports are always setto full-duplex;therefore, the LEDis always green.

    The status indicators fornetwork ports on the front panel are:

    GreenPort is setto full-duplex mode. UnlitPort is set to half-duplex mode.

    LED: DPX

    Indicates the PoE status on switcheswith PoE-enabledports.

    PoE is not enabled on uplink module ports; therefore, the LEDfor those ports is always unlit.

    The status indicators fornetwork ports on the front panel are:

    GreenPoE is enabled on the port. AmberPoE is enabled on the port, but no power is drawn

    from theport because of one of the following: No device that draws powerfrom the port is connected

    to the port. A device that draws power from the port is connected to

    the port, but the device is not drawing any power fromthe port.

    UnlitPoE is not enabled on theport.

    LED: POE

    Indicates the speed.LED: SPD

    The speed indicators for network ports on the front panel are:

    One blink per second10 Mbps Two blinks per second100 Mbps Three blinks per second1000Mbps

    The speed indicators for network ports on the SFPuplinkmodule are:

    Green1000 Mbps Unlit10/100 Mbps

    The speed indicators for network ports on the SFP+ uplinkmodule are:

    GreenThe speed of the transceiver installed in the port isthe same asthe speed atwhich the uplink moduleportisconfigured to operate.

    UnlitThe speed of the transceiver installed in the port is

    21Copyright 2011, JuniperNetworks, Inc.

    Chapter 2: Component Descriptions

  • 8/6/2019 Hardware Ex 320