Gamme Sécurité 1ère 3 Solutions pour Recouvrement amiante Tél: (+33) 06 4543 7595 (+33) 06 4866 9349 +44 (0) 28 9261 6934 Fax: +44 (0) 28 9261 2326 Email: [email protected]Site Web: www.easa.fr ® Vous rencontrez un problème de faïences et/ou de colle amiantée dans une salle de bain ? Vous souhaitez éviter un désamiantage couteux ainsi qu’une immobilisation du logement ? Nous vous proposons quatre solutions de Recouvrement Simples et rapides à installer, esthétiques et résistantes. Vous êtes formé sous-section 4 ? Un opérateur sous-section 4 peut faire l’installation Panneaux pour Recouvrement amiante pour baignoire et pour lavabo Panneaux pour Recouvrement amiante pour cuisine Cabines de douche
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
®Evolution Grab Rails Fitting Instructions
top anchor. Mark with pencil for centre of Anchor plate.2. For stud walls, place the anchor plate on the stud location and mark the screw holes with a pencil.
Items that may be required:
• Tape measure • Pencil• Variable speed drill • Drill bit set • Screwdriver• • Pipe and voltage detector • Masking tape
, bear in mind their height to consider where the grab rails may be positioned.
Please ensure that the correct type of screws are used for the type of wall and loading required. Do not enlarge any of the grab rail mounting holes nor over-tighten the screws.
Use a pipe and voltage detector to make sure that there are no wires and/or pipes behind the walls where you are seeking to position the grab rails.
a pencil mark on the stud location. Locate two studs on the wall of the shower based on the length of the handrail. Mark the stud locations with a pencil.
Mark with a pencil the location where you will install the grab rail.
Double check your measurements so that you are completely sure of them before beginning any work.
Tablette de finition (vue de face) Tablette de finition (vue de côté) Adaptateur fenêtre Adaptateur fenêtre
Panneau effet carrelage (vue complète)
Cabine de douche intégrale option F
®
Panneau isolant anti-amiante pour baignoires
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
O�ce of Fair Trading
NF EN 14527 : 2016 Receveurs de douche NF EN 14428 : 2004 + A1 : 2008 Parois de douche Règlement Produits de Construction (RPC) n° 305/2011 NF EN 12600 : 2002 Verre dans la construction. Essai au pendule.
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
O�ce of Fair Trading
Précurseur en Design Pour Tous
®
ORIGINAL • ORIG
INA
L • ORIG
INA
L • ORIGINAL • ORIGINAL •
ORI
GIN
AL •
ORI
GIN
AL •
ORIGINAL •
Email: [email protected] Nord : +33 (0) 6 45 43 75 95 Tel Sud : +33 (0) 6 48 66 93 49
www.easa.fr
Corner Piece Panneau isolant anti-amiante
®
Panneau isolant anti-amiante pour cuisines
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
Office of Fair Trading
NF EN 14527 : 2006 + A1 : 2010 Receveurs de douche NF EN 14428 : 2004 + A1 : 2008 Parois de douche Règlement Produits de Construction (RPC) n° 305/2011 NF EN 12600: 2002 Verre dans la construction. Essai au pendule. Méthode d’essai d’impact et classification du verre plat.
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
Office of Fair Trading
Précurseur en Design Pour Tous
®
ORIGINAL • ORIG
INA
L • ORIG
INA
L • ORIGINAL • ORIGINAL •
ORI
GIN
AL •
ORI
GIN
AL •
ORIGINAL •
Email: [email protected] Nord : +33 (0) 6 45 43 75 95 Tel Sud : +33 (0) 6 48 66 93 49
Vous rencontrez un problème de faïences et/ou de colle amiantée dans une salle de bain ? Vous souhaitez éviter un désamiantage couteux ainsi qu’une immobilisation du logement ?Nous vous proposons quatre solutions de Recouvrement Simples et rapides à installer, esthétiques et résistantes.
Vous êtes formé sous-section 4 ?Un opérateur sous-section 4 peut faire l’installation
Panneaux pour Recouvrement amiante pour baignoire et pour lavabo
top anchor. Mark with pencil for centre of Anchor plate.2. For stud walls, place the anchor plate on the stud location and mark the screw holes with a pencil.
Items that may be required:
• Tape measure • Pencil• Variable speed drill • Drill bit set • Screwdriver• • Pipe and voltage detector • Masking tape
, bear in mind their height to consider where the grab rails may be positioned.
Please ensure that the correct type of screws are used for the type of wall and loading required. Do not enlarge any of the grab rail mounting holes nor over-tighten the screws.
Use a pipe and voltage detector to make sure that there are no wires and/or pipes behind the walls where you are seeking to position the grab rails.
a pencil mark on the stud location. Locate two studs on the wall of the shower based on the length of the handrail. Mark the stud locations with a pencil.
Mark with a pencil the location where you will install the grab rail.
Double check your measurements so that you are completely sure of them before beginning any work.
Référence Description DimensionsAEP170140 Panneau pour recouvrement amiante pour baignoire 170cm x 140cmAEPS090025 Tablette de finition pour baignoire 90cm x 25cmAEPW001 Kit adaptateur fenêtre pour baignoire Base: 160cm Côtés: 125cmAEP071134 Panneau pour recouvrement amiante pour lavabo 71cm x 134,5cmAEP081134 Panneau pour recouvrement amiante pour lavabo 81cm x 134,5cmAEPC003 Profilé d'angle pour panneaux recouvrement amiante baignoire 3cm x 3cm x 140cm
Règlement Produits de Construction (RPC) n° 305/2011NF EN 14527 : 2016 Receveurs de doucheNF EN 14428 : 2015 Parois de doucheNF EN 12150 : 2015 Verre dans la construction. Verre de silicate sodo-calcique de sécurité trempé thermiquement.NF EN 12600 : 2002 Verre dans la construction. Essai au pendule. Méthode d’essai d’impact et classification du verre plat.
134,5 cm 134,5 cm
SALLE DE BAIN: Panneaux pour Recouvrement amiante pour baignoire
CUISINE: Panneaux pour Recouvrement amiante pour cuisine
Profilé de finition pour panneaux recouvrement amiante cuisine (pour masquer le bord coupé d'un panneau)
Panneau pour recouvrement amiante cuisine
®Evolution Grab Rails Fitting Instructions
top anchor. Mark with pencil for centre of Anchor plate.2. For stud walls, place the anchor plate on the stud location and mark the screw holes with a pencil.
Items that may be required:
• Tape measure • Pencil• Variable speed drill • Drill bit set • Screwdriver• • Pipe and voltage detector • Masking tape
, bear in mind their height to consider where the grab rails may be positioned.
Please ensure that the correct type of screws are used for the type of wall and loading required. Do not enlarge any of the grab rail mounting holes nor over-tighten the screws.
Use a pipe and voltage detector to make sure that there are no wires and/or pipes behind the walls where you are seeking to position the grab rails.
a pencil mark on the stud location. Locate two studs on the wall of the shower based on the length of the handrail. Mark the stud locations with a pencil.
Mark with a pencil the location where you will install the grab rail.
Double check your measurements so that you are completely sure of them before beginning any work.
Tablette de finition (vue de face) Tablette de finition (vue de côté) Adaptateur fenêtre Adaptateur fenêtre
Panneau effet carrelage (vue complète)
Cabine de douche intégrale option F
®
Panneau isolant anti-amiante pour baignoires
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
O�ce of Fair Trading
NF EN 14527 : 2016 Receveurs de douche NF EN 14428 : 2004 + A1 : 2008 Parois de douche Règlement Produits de Construction (RPC) n° 305/2011 NF EN 12600 : 2002 Verre dans la construction. Essai au pendule.
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
O�ce of Fair Trading
Précurseur en Design Pour Tous
®
ORIGINAL • ORIG
INA
L • ORIG
INA
L • ORIGINAL • ORIGINAL •
ORI
GIN
AL •
ORI
GIN
AL •
ORIGINAL •
Email: [email protected] Nord : +33 (0) 6 45 43 75 95 Tel Sud : +33 (0) 6 48 66 93 49
www.easa.fr
Corner Piece Panneau isolant anti-amiante
®
Panneau isolant anti-amiante pour cuisines
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
Office of Fair Trading
NF EN 14527 : 2006 + A1 : 2010 Receveurs de douche NF EN 14428 : 2004 + A1 : 2008 Parois de douche Règlement Produits de Construction (RPC) n° 305/2011 NF EN 12600: 2002 Verre dans la construction. Essai au pendule. Méthode d’essai d’impact et classification du verre plat.
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
Office of Fair Trading
Précurseur en Design Pour Tous
®
ORIGINAL • ORIG
INA
L • ORIG
INA
L • ORIGINAL • ORIGINAL •
ORI
GIN
AL •
ORI
GIN
AL •
ORIGINAL •
Email: [email protected] Nord : +33 (0) 6 45 43 75 95 Tel Sud : +33 (0) 6 48 66 93 49
Vous rencontrez un problème de faïences et/ou de colle amiantée dans une salle de bain ? Vous souhaitez éviter un désamiantage couteux ainsi qu’une immobilisation du logement ?Nous vous proposons quatre solutions de Recouvrement Simples et rapides à installer, esthétiques et résistantes.
Vous êtes formé sous-section 4 ?Un opérateur sous-section 4 peut faire l’installation
Panneaux pour Recouvrement amiante pour baignoire et pour lavabo
top anchor. Mark with pencil for centre of Anchor plate.2. For stud walls, place the anchor plate on the stud location and mark the screw holes with a pencil.
Items that may be required:
• Tape measure • Pencil• Variable speed drill • Drill bit set • Screwdriver• • Pipe and voltage detector • Masking tape
, bear in mind their height to consider where the grab rails may be positioned.
Please ensure that the correct type of screws are used for the type of wall and loading required. Do not enlarge any of the grab rail mounting holes nor over-tighten the screws.
Use a pipe and voltage detector to make sure that there are no wires and/or pipes behind the walls where you are seeking to position the grab rails.
a pencil mark on the stud location. Locate two studs on the wall of the shower based on the length of the handrail. Mark the stud locations with a pencil.
Mark with a pencil the location where you will install the grab rail.
Double check your measurements so that you are completely sure of them before beginning any work.
Référence Description DimensionsAEP170140 Panneau pour recouvrement amiante pour baignoire 170cm x 140cmAEPS090025 Tablette de finition pour baignoire 90cm x 25cmAEPW001 Kit adaptateur fenêtre pour baignoire Base: 160cm Côtés: 125cmAEP071134 Panneau pour recouvrement amiante pour lavabo 71cm x 134,5cmAEP081134 Panneau pour recouvrement amiante pour lavabo 81cm x 134,5cmAEPC003 Profilé d'angle pour panneaux recouvrement amiante baignoire 3cm x 3cm x 140cm
Règlement Produits de Construction (RPC) n° 305/2011NF EN 14527 : 2016 Receveurs de doucheNF EN 14428 : 2015 Parois de doucheNF EN 12150 : 2015 Verre dans la construction. Verre de silicate sodo-calcique de sécurité trempé thermiquement.NF EN 12600 : 2002 Verre dans la construction. Essai au pendule. Méthode d’essai d’impact et classification du verre plat.
134,5 cm 134,5 cm
SALLE DE BAIN: Panneaux pour Recouvrement amiante pour baignoire
CUISINE: Panneaux pour Recouvrement amiante pour cuisine
Profilé de finition pour panneaux recouvrement amiante cuisine (pour masquer le bord coupé d'un panneau)
Panneau pour recouvrement amiante cuisine
®Evolution Grab Rails Fitting Instructions
top anchor. Mark with pencil for centre of Anchor plate.2. For stud walls, place the anchor plate on the stud location and mark the screw holes with a pencil.
Items that may be required:
• Tape measure • Pencil• Variable speed drill • Drill bit set • Screwdriver• • Pipe and voltage detector • Masking tape
, bear in mind their height to consider where the grab rails may be positioned.
Please ensure that the correct type of screws are used for the type of wall and loading required. Do not enlarge any of the grab rail mounting holes nor over-tighten the screws.
Use a pipe and voltage detector to make sure that there are no wires and/or pipes behind the walls where you are seeking to position the grab rails.
a pencil mark on the stud location. Locate two studs on the wall of the shower based on the length of the handrail. Mark the stud locations with a pencil.
Mark with a pencil the location where you will install the grab rail.
Double check your measurements so that you are completely sure of them before beginning any work.
Tablette de finition (vue de face) Tablette de finition (vue de côté) Adaptateur fenêtre Adaptateur fenêtre
Panneau effet carrelage (vue complète)
Cabine de douche intégrale option F
®
Panneau isolant anti-amiante pour baignoires
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
O�ce of Fair Trading
NF EN 14527 : 2016 Receveurs de douche NF EN 14428 : 2004 + A1 : 2008 Parois de douche Règlement Produits de Construction (RPC) n° 305/2011 NF EN 12600 : 2002 Verre dans la construction. Essai au pendule.
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
O�ce of Fair Trading
Précurseur en Design Pour Tous
®
ORIGINAL • ORIG
INA
L • ORIG
INA
L • ORIGINAL • ORIGINAL •
ORI
GIN
AL •
ORI
GIN
AL •
ORIGINAL •
Email: [email protected] Nord : +33 (0) 6 45 43 75 95 Tel Sud : +33 (0) 6 48 66 93 49
www.easa.fr
Corner Piece Panneau isolant anti-amiante
®
Panneau isolant anti-amiante pour cuisines
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
Office of Fair Trading
NF EN 14527 : 2006 + A1 : 2010 Receveurs de douche NF EN 14428 : 2004 + A1 : 2008 Parois de douche Règlement Produits de Construction (RPC) n° 305/2011 NF EN 12600: 2002 Verre dans la construction. Essai au pendule. Méthode d’essai d’impact et classification du verre plat.
PRODUITS RECYCLABLES
Produit de l’année 2007
CONÇU ET FABRIQUÉ EN EUROPE
Office of Fair Trading
Précurseur en Design Pour Tous
®
ORIGINAL • ORIG
INA
L • ORIG
INA
L • ORIGINAL • ORIGINAL •
ORI
GIN
AL •
ORI
GIN
AL •
ORIGINAL •
Email: [email protected] Nord : +33 (0) 6 45 43 75 95 Tel Sud : +33 (0) 6 48 66 93 49
Vous rencontrez un problème de faïences et/ou de colle amiantée dans une salle de bain ? Vous souhaitez éviter un désamiantage couteux ainsi qu’une immobilisation du logement ?Nous vous proposons quatre solutions de Recouvrement Simples et rapides à installer, esthétiques et résistantes.
Vous êtes formé sous-section 4 ?Un opérateur sous-section 4 peut faire l’installation
Panneaux pour Recouvrement amiante pour baignoire et pour lavabo
top anchor. Mark with pencil for centre of Anchor plate.2. For stud walls, place the anchor plate on the stud location and mark the screw holes with a pencil.
Items that may be required:
• Tape measure • Pencil• Variable speed drill • Drill bit set • Screwdriver• • Pipe and voltage detector • Masking tape
, bear in mind their height to consider where the grab rails may be positioned.
Please ensure that the correct type of screws are used for the type of wall and loading required. Do not enlarge any of the grab rail mounting holes nor over-tighten the screws.
Use a pipe and voltage detector to make sure that there are no wires and/or pipes behind the walls where you are seeking to position the grab rails.
a pencil mark on the stud location. Locate two studs on the wall of the shower based on the length of the handrail. Mark the stud locations with a pencil.
Mark with a pencil the location where you will install the grab rail.
Double check your measurements so that you are completely sure of them before beginning any work.
Référence Description DimensionsAEP170140 Panneau pour recouvrement amiante pour baignoire 170cm x 140cmAEPS090025 Tablette de finition pour baignoire 90cm x 25cmAEPW001 Kit adaptateur fenêtre pour baignoire Base: 160cm Côtés: 125cmAEP071134 Panneau pour recouvrement amiante pour lavabo 71cm x 134,5cmAEP081134 Panneau pour recouvrement amiante pour lavabo 81cm x 134,5cmAEPC003 Profilé d'angle pour panneaux recouvrement amiante baignoire 3cm x 3cm x 140cm
Règlement Produits de Construction (RPC) n° 305/2011NF EN 14527 : 2016 Receveurs de doucheNF EN 14428 : 2015 Parois de doucheNF EN 12150 : 2015 Verre dans la construction. Verre de silicate sodo-calcique de sécurité trempé thermiquement.NF EN 12600 : 2002 Verre dans la construction. Essai au pendule. Méthode d’essai d’impact et classification du verre plat.