O 2 CO 2 CO °C hPa qA Eta Simple menu structure 4-line segment display with LED illumination Fast, single-plug probe connection 8 selectable fuels Life expectancy of sensors minimum 3 years Easy IR printout Memory for 20 measurement values in testo 327-2 Li-Ionen rech. battery (2,400 mA), life 10 hours TÜV-tested according to 1. BImSchV / EN 50379 Flue gas analyzer testo 327 – The special class entry instrument We measure it.
20
Embed
Flue gas analyzer · • Draught measurement • 6-8 fuels (country-specific (e.g. UK=6)) • IP 40 testo 327-1 O2 flue gas analyzer, rech. battery and calibration protocol; measures
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
O2
CO2
CO
°C
hPa
qA
Eta
Simple menu structure
4-line segment display with LED illumination
Fast, single-plug probe connection
8 selectable fuels
Life expectancy of sensors minimum 3 years
Easy IR printout
Memory for 20 measurement values in testo 327-2
Li-Ionen rech. battery (2,400 mA), life 10 hours
TÜV-tested according to 1. BImSchV / EN 50379
Flue gas analyzer
testo 327 – The special classentry instrument
We measure it.
testo-327-P01 26.10.2011 13:46 Seite 1
Fast probe connection: All gaspaths are connected with one"click"
The "second skin" is integratedinto the instrument design andprotects from impact and shockduring tough everyday use
Excellent display clearness even inunfavourable lighting conditions
Stable probes filter particlesbefore they get into gas paths
Sensors are as easy to change asa battery
Latest Li-ion rechargeablebatteries
Built-in condensate trap
The special class entry instrument
testo 327-1 / testo 327-2 We measure it.
testo 327 is the entry measuring instrument for flue gas
analysis. It measures combustion efficiency, °C, O2, CO2,
CO and flue draught. A dual wall O2 measurement as well as
an ambient CO measurement are also possible. The
powerful LED backlighting in the 4-line display guarantees
good legibility even in unfavourable lighting. The measuring
instrument stands out thanks to its ergonomic housing
design as well as its durability (IP40). The integrated sensor
and instrument diagnosis offers security and guarantees
high availability of the instrument. The testo 327 is TÜV-
tested according to BImSchV and fulfils the requirements of
EN50379. The quick probe connection of the testo 327
allows easy and uncomplicated connection of the probe.
For simpler applications, the single-sensor instrument
versions testo 327-1 O2 and testo 327-1 CO are suitable.
The testo 327-1 O2 measures the O2 content of the flue gas,
the flue gas temperature and the flue draught. The flue gas
loss and the efficiency are calculated. The testo 327-1
measures the CO content of the flue gas, the flue gas
temperature and the flue draught.
testo-327-P02 26.10.2011 13:52 Seite 2
Additional differential pressuremeasurement up to 200 mbar
Bltutooth wireless transfer(optional)
H2-compensated COmeasurement cell for officialtesting according to EN norm50379-2 (optional)
Powerful Li-ion rechargeablebattery with 10-hour lifetime withpump running
testo 327-1The starter instrument for flue gas analysis
testo 327-2The service instrument for flue gas analysis
· Contains all basic functions such as combustive effectivity, fluegas loss, O2, CO2, CO and flue draught
· Robust and protected from impact by Elastomer protection class
· Easy operational structure and procedure
· Ideal handling thanks to easy menu structure and ergonomichousing
· Stable measurement value within 30 sec.
· Compatible with the entire probe range of testo 330
· Low weight (ca. 500 g)
· TÜV-geprüft nach 1. BImSchV / EN 50379 Teil 2 für O2, °C, hPaund Teil 3 für CO
· Bluetooth wireless transfer (optional)
· IR & IRDA interface for easy readout of data to PC, printer orPocket PC
· Life expectancy of the measurement cells up to 3 years
· Security thanks to instrument and sensor diagnosis
· Differential temperature measurement
· Differential pressure measurement with 2 measuring ranges
· Memory for 20 measurements
· Li-ion rechargeable battery (2,400 mA), life 10 Std.
· CO measurement with H2-compensation (optional)
· TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2,°C, hPa and CO with H2-compensation
The additional functions of the testo 327-2
testo 327-1 / testo 327-2 We measure it.
testo 327-1 is your introductory instrument to flue gas
analysis. It measures combustion efficiency, °C, O2, CO2,
CO and flue draught. The strong LED background light in
the 4 line display guarantees an easy-to-read display even if
lighting conditions are unfavourable. The analyser stands
out on account of its easy menu navigation and ergonomic
housing as well as its durability.
testo 327-2 is the convenient service instrument for flue gas
analysis. The measurement cell has a lifetime of up to 3
years. The status diagnosis of wearing- and service-parts
offers higher planning security in the conduction of
measurements. testo 327-2 can optionally be equipped with
a CO measurement cell, in order to conduct official tests
according to EN 50379-2.
testo-327-P03 26.10.2011 13:53 Seite 3
testo 327-1
Flue gas analyzer testo 327-1
testo 327-1
testo 327-1 CO
testo 327-1 O2
testo 327-1 flue gas analyzer, incl. rech.battery and calibration protocol; measuresO2, CO, hPa, °C
testo 327-1 CO flue gas analyzer, incl. rech. battery and calibrationprotocol; measures CO, hPa, °C
• Easy menu navigation
• 4 line segment display
• LED display light
• Easy IR printout
• Built-in condensate trap
• TÜV By RgG 253 acc. to
1. BImSchV
• EN 50379 Part 2 for O2, °C, hPa
• EN 50379 Part 3 for CO
• Small Li-ion rechargeable battery (1200 mA, lifetime of 5 h)
can be recharged inside or outside instrument
• Fast probe connection using single probe plug
• Ambient CO measurement using flue gas probe
• O2 dual wall measurement (can be stored)
• Separate AT temperature measurement
• Undiluted CO measurement (can be stored)
• Draught measurement
• 6-8 fuels (country-specific (e.g. UK=6))
• IP 40
testo 327-1 O2 flue gas analyzer, rech. battery and calibrationprotocol; measures O2, hPa, °C
Part no. 0632 3201
Part no. 0632 3204
Part no. 0632 3203
Technical data
Temperature measurement -40 to +600 °C
Draught measurement ±40 hPa
Efficiencymeasurement (Eta)
0 to 120%
Flue gas loss (qA) 0 to 99.9%
O2 measurement 0 to 21 Vol. %
CO2 measurement 0 to CO2 max
CO measurement 0 to 4000 ppm
General technical data
Storage temp. -20 to +50 °C
Oper. temp. -5 to +45 °C
Power supply via Li-Ion rechargeable battery
Battery life > 5 h
Weight Approx. 500 g
Dimensions 216 x 68 x 47 mm
Warranty 2 years on instrument, probes and gassensors1 year on thermocouple and rechargeablebattery (wearing parts excluded)
Part no. 0563 3203 70
testo 327-1 Basic Set for heating and installationtechnicians
testo 327-1 flue gas set basic for heating fitters and installationtechnicians, incl. rech. batteriesand calibration protocol; mains unit100-240 V formains operation or battery charging in instrument;compact flue gas probe, length 180 mm, Ø 6mm; combustion air temperature probe, length190 mm, fast printer with wireless infraredinterface; instrument cleaner 100 ml, basicsystem case instrument, probes andaccessories
Illustration may differ from original
We measure it.
testo-327-P04 26.10.2011 14:31 Seite 4
testo 327-2
Flue gas analyzer testo 327-2
testo 327-2
testo 327-2 flue gas analyzer, incl. rech.battery and calibration protocol; measuresO2, CO, hPa, °C
Part no. 0632 3202
Technical data
Temperature measurement -40 to +600 °C
±40 hPa
Efficiencymeasurement (Eta)
0 to 120%
Flue gas loss (qA) 0 to 99.9%
Pressure measurement ±200 hPa
O2 measurement 0 to 21 Vol. %
CO2 measurement 0 to CO2 max
CO measurement 0 to 4000 ppm
Option CO measurement(H2-compensated)
0 to 8000 ppm
General technical data
Storage temp. -20 to +50 °C
Oper. temp. -5 to +45 °C
Power supply via Li-ion rechargeable battery
Battery life > 10 h
Weight Approx. 500 g
Dimensions 216 x 68 x 47 mm
Warranty 2 years on instrument, probes and gassensors1 year on thermocouple and rechargeablebattery (wearing parts excluded)
Part no. 0563 3202 70
testo 327-2 Set for heating fitters
testo 327-2 flue gas set serivce for heating fitters, incl. rech. battery andcalibration protocol; including option: CO-H2 measurement; mains unit100-240 V for mains operation or battery charging in instrument; modularflue gas probe, length 300 mm, Ø 8 mm, TÜV approval; combustion airtemperature probe, length 190 mm; hose connection set for separate gaspressure measurement; fast printer wireless infrared interface;flexible probe shaft, length 300 mm, Ø 10 mm,Tmax. 180 °C; instrument cleaner, 100 ml; basicsystem case for instrument, probes andaccessories
• Life expectancy of gas sensors up to 3 years
• Assurance thanks to instrument and sensor diagnosis
• IR and IRDA interface for easy reading out of data to
printer or Pocket PC
• BLUETOOTH® wireless transfer (optional)
• Delta T measurement
• Delta P measurement: 2 measurement ranges
• Store (20 readings)
• Li-ion rechargeable battery (2,400 mA), 10
hr lifetime
• TÜV By RgG 254 acc. to
1. BImSchV
• CO option with H2 compensation
• Official test in accordance with EN standard 50379-2 for
°C; O2, hPa, Part 3 for CO
• Optional Part 2 for CO with H2 compensation
*Country permits: The BLUETOOTH® wireless module used by Testo has permits for thefollowing listed countries, and can only be used in those countries, i. e. BLUETOOTH®
wireless transfer may not be used in any other country! Europe including all EU memberstates: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,Sweden and Turkey; European countries (EFTA): Iceland, Liechtenstein, Norway andSwitzerland; Non-European countries: Ukraine, Colombia and El Salvador.
Illustration may differ from original
We measure it.
Draught measurement
testo-327-P05 26.10.2011 14:38 Seite 5
Part no.
Part no.
Part no.
Part no.
Upgrade/Options
Spare sensors
Accessories
Cases
Retrofits
0440 3273
0390 0047
0390 0046
0390 0092
0390 0095
0390 0109
0554 1096
0516 3334
0554 1087
0554 0549
0554 0568
0554 1207
0554 0307
0554 1203
0554 1210
0520 0003
0554 1208
0554 3385
0554 0146
Option: CO-H2-measurement for testo 327
Spare O2 sensor for testo 327-1, 327-1 O2
Spare CO sensor for testo 327-1, 327-1 CO
Spare O2 sensor, Testo-specific
Spare CO sensor Testo-specific (without H2 compensation)
Spare CO sensor testo-specific (H2 compensated)
Mains unit international 100-240 V AC / 6,3V DC for mains operation or battery charging in instrument for mainsoperation or battery charging in instrument
Basic system case testo 327-1/-2 for instrument, probes and accessories
Differential temperature set consisting of 2 Velcro probes and temperature adaper testo 327
Spare particle filter, 10 off
Spare soot filter paper; 8 paper rolls
Retrofit: O2 measurement for testo 327-1 CO
0440 3271
0440 3272
0344 0011
Option: fine draught measurement, resolution 0.1 Pa, measurement range up to100 Pa (instead of standarddraught measurement) - for testo 327-1, 327-1 O2/CO and testo 327-2
Option: fine differential pressure measurement, resolution 1 Pa; for testo 327-2 only
Option BLUETOOTH® module*
testo 327-1 / testo 327-2
Accessories
*Country permits: The BLUETOOTH® wireless module used by Testo has permits for thefollowing listed countries, and can only be used in those countries, i. e. BLUETOOTH®
wireless transfer may not be used in any other country! Europe including all EU memberstates: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,Sweden and Turkey; European countries (EFTA): Iceland, Liechtenstein, Norway andSwitzerland; Non-European countries: Ukraine, Colombia and El Salvador.
We measure it.
testo-327-P06 26.10.2011 14:39 Seite 6
Part no.
Part no.
Part no.
Part no.
Part no.
Compact basic flue gas probes available in two lengths, probe stop, NiCr-Ni thermocouple, 1.5 m hoseand particle filter included
Modular flue gas probe from the testo 330 product line, available in 2 lengths, probe stop, NiCr-Nithermocouple, 2.2 m hose and particle filter included
Probe accessories
Additional probes
Combustion air temperature probes
0600 9740
0600 9760
0600 9761
0600 9762
0600 9763
0600 9764
0554 9760
0600 9741
0554 9762
0554 9761
0554 8764
0554 9764
0554 5762
0554 5763
0554 1202
0554 3327
0554 3328
0554 3330
0554 3329
0440 3334
0632 1260
0600 9791
0600 9787
0600 9797
0604 0194
Flue gas probe compact; length 180 mm; Ø 6 mm; Tmax. 500 °C; probe stop; NiCr-Ni thermocouple, 2.2 m hose andparticle filter included
Flue gas probe; length 180 mm; Ø 8 mm; Tmax. 500 °C; TÜV approval; probe stop; NiCr-Ni thermocouple; 2.2 mhose and particle filter included
Flue gas probe; length 300 mm; Ø 8 mm; Tmax. 500 °C; TÜV approval; probe stop; NiCr-Ni thermocouple; 2.2 mhose and particle filter included
Flue gas probe; length 180 mm; Ø 6 mm; Tmax. 500 °C; probe stop; NiCr-Ni thermocouple; 2.2 m hose andparticle filter included
Flue gas probe; length 300 mm; Ø 6 mm; Tmax. 500 °C; probe stop; NiCr-Ni thermocouple; 2.2 m hose andparticle filter included
Flue gas probe flexible; length 330 mm; Tmax. 180 °C; short-term 200 °C; bending radius max. 90 °C formeasuring at inaccessible points; probe stop; NiCr-Ni-thermocouple; 2,2 m hose and particle filter included
Probe shaft; length 180 mm; 8 mm; Tmax. 500 °C
Flue gas probe compact; length 300 mm; Ø 6 mm; Tmax. 500 °C; probe stop; NiCr-Ni thermocouple, 2.2 m hose andparticle filter included
Probe shaft; length 180 mm; Ø 6 mm; Tmax. 500 °C
Probe shaft; length 300 mm; Ø 8 mm; Tmax. 500 °C
Probe shaft with probe stop, length probe shaft 335 mm, Tmax probe shaft 1000 °C, Ø probe shaft 8 mm
Probe shaft multi-hole; length 300 mm; Ø 8 mm; for mean CO calculation
Probe shaft multi-hole; length 180 mm; Ø 8 mm; for mean CO calculation
Hose extension; 2.8 m; extension cable for probe and analyzer
6 mm probe stop, PTFE, with spring clamp and handle, Tmax 200 °C
8 mm probe stop, PTFE, with spring clamp and handle, Tmax 200 °C
Probe stop 8 mm; steel; with spring clamp and handle; Tmax. 500 °C
Probe stop 6 mm; steel; with spring clamp and handle; Tmax. 500 °C
Modular flue gas probe handle
Dual wall clearance probe for O2 supply air measurement
Combustion air temperature probe, immersion depth 300 mm
Combustion air temperature probe, immersion depth 190 mm
Combustion air temperature probe, immersion depth 60 mm
Quick-action surface probe with sprung thermocouple strip; measuring range shot-term to +500 °C
testo 327-1 / testo 327-2
Probes
We measure it.
testo-327-P07 26.10.2011 14:40 Seite 7
testo 327-1 / testo 327-2
www.testo.in
0981
266
4/m
sp/A
/01.
2012
Sub
ject
to
chan
ge w
ithou
t no
tice.
We measure it.
testo-327-P08 26.10.2011 14:41 Seite 8
LLLL
°C
hPa
O2
CO/H2
NO
ΔP
testo AG
Flue gas
Options
StartValues
12.01.10 14:35
The new testo 330 LL visualizes measurement data graphically
4 years' warranty oninstrument and probes
Understand flue gas analysis at a glance
We measure it.
01-12-t330 28.10.2011 11:57 Seite 1
X
2
testo 330 LL
18.01.10 14:35
Testo AG
LPG
Condensing boiler
122.3 °C AT
Options Start Values
5.8% qA
Independently of the technology used, every combustion system must function optimally. More than ever,
requirement-based heat provision, low energy consumption and reduced pollutant emission are of central
significance. In order to be able to exploit existing optimization potential as well as possible, regular testing
and adjustment of the heating system is necessary. The new Testo flue gas analyzers testo 330-1 LL and
testo 330-2 LL offer even more professional support in this thanks to new instrument functions.
The new flue gas analyzer testo 330 LLvisualizes measurement data graphically
If the recorded measurement values are not within the op-
timum range, the symbols of the flue gas matrix provide im-
portant information for the required adjustment of the heat-
ing system.
The central element of the new graphic processing of the
measurement data is the flue gas matrix.
The flue gas matrix
In the course of the flue gas measurement, this
shows whether the CO and O2 values, as well
as other measurement parameters, are in the
green, permitted range, and the heating system is thus op-
timally adjusted.
Thumb symbols instantly show the status of the system. If
the CO and O2 concentrations measured are in the green
range, the thumbs point up.
Bad combustion – the CO concentration is over
the defined limit value, the recorded CO con-
tent is not within the ideal range
Measurement value is not acceptable – the CO
and O2 concentrations are considerably too
high, the measurement values do not corre-
spond to the prescribed norms and limit values
High loss – the O2 concentration is over the de-
fined limit value, the heating system is not work-
ing efficiently
The new colour graphic display of the flue gasanalyzer testo 330 LL visualizes the measure-ment data graphically:
Self-explanatory graphic curves as well as easysymbols and clear colour design ease theanalysis of the measurement data considerably.
02-03-t330 28.10.2011 11:58 Seite 2
3
Further advantages of the flue gas analyzer testo 330 LL:Ergonomic instrument design
Thanks to the new colour design and the materials used, the instrument is
also suitable for use in rough and dirty surroundings, and lies ergonomically in
your hand.
14.09.09 14:35
Testo AGNatural gas
Options
18.01.10 14:35
Testo AGNatural gas
Measurements
Folders
Fuels
Protocols
Instrument settings
Sensor settings
Program
Instrument diagnosis
Differential temperature
Smoke count/ HCT
CO undiluted
Fine pressure probe
Draught measurement
Flue gas
Fuel OK LocationOK
Testo AG
Natural gas
Measurements
18.01.10 14:35
Main menu – select adjustment function Select one of the pre-set measurements Measurement data can be graphicallyvisualized and quickly analyzed
The advantages of the new flue gas analyzer testo 330 LL:
· High-resolution colour display for the graphic representation of the measurement data
· Extended measurement menus such as tightness testing and solid fuel measurement
for comprehensive analysis of the heating system
· Logger function for easy long-term recording of the measurement curve
Understand flue gas analysis at a glance
The measurement menus – the right menu for every measurement task:
We measure it.
Flue gas
Draught measurement
Fine pressure probe
BImSchV
CO undiluted
Smoke number/HCT
Differential pressure
Differential temperature
O2 input air
Gas flow rate
Oil flow rate
CO ambient
CO2 ambient
Automatic burner
Gas pipe tests
Solid fuel measurement
02-03-t330 28.10.2011 11:58 Seite 3
4
testo 330 LL
Setting OK Location
14.09.09 14:35
Testo AG
Natural gas
Leakage test
Usability
Leak detection
Gas fitting tightnesstest
Gas pipe tests
Options Stop Values
14.09.09 14:35
Testo AG
122.3 °C AT 5.8 qA
Ideal ranges ≤
100 ppm CO ≤ 4
% O2
LPG
Measuring
Extended measurement menus allow a comprehensive analysis of the heating system. Thesefive typical measurement tasks illustrate how clearly the measurement data are presentedin the display:
Typical measurement menus
is the central measurement in flue gas
analysis. By determining the main val-
ues, CO and O2, as well as other meas-
urement parameters, a judgement can
be made as to whether your heating
system is properly adjusted or whether
there is a need for optimization.
Different display options offer the right
presentation of the measurement val-
ues, depending on requirements:
· 4- to 8-line as numerical values
· 4 measurement values simultane-
ously presented in a line graph
· Main values O2 and CO, as well as
further measurement values, graphi-
cally displayed as a flue gas matrix
Advantages of the new flue gas ma-
trix:
· The flue gas matrix acts as an adjust-
ment assistent for the main values O2
and CO
· The optimization of the adjustment is
much easier – the interpretation of the
numerical values is no longer neces-
sary
· Thanks to the trend display, the meas-
urement curve can be followed exactly,
and the measurement point precisely
determined.
· The automatic zoom function provides
an enlarged and clear display of the
current detail of the flue gas matrix
is divided into 4 measurements which
guarantee a comprehensive test of the
gas pipe: Gas tightness test, usability test,
gas fitting tightness test and leakage de-
tection. After selecting the desired meas-
urement, the testo 330 LL begins directly
with the corresponding gas pipe check.
A separate gas leak detection probe is re-
quired for leakage detection. The gas
tightness test can be conducted over a
period of 10 minutes. The gas fitting tight-
ness test is conducted over a period of
one minute directly under operating con-
ditions.
Advantages of the new testo 330 LL:
· Thanks to prescribed measurement
procedures, the desired test can be
conducted quickly and easily
· The testo 330 LL leads the user
through the measurement step by
step, presenting the the corresponding
information in the display
· The measurement data are displayed
in easy and clear diagrams
The CO concentration is in the range ofbad combustion. The instrument provi-des information on the ideal range.
Flue gas measurement…
The gas pipe test…
The four measurements for testing thegas pipe
04-05-t330 28.10.2011 11:59 Seite 4
5
Graph Start Save
14.09.09 14:35
Testo AG
Natural gas
Measurement
FT max.
FT
Draught
UnderpressureZeroing sonsor
22 ppm COamb
Options Stop Save
14.09.09 14:35
Testo AG
Natural gas
Alarm threshold 30 ppm CO
Danger
Options Stop
14.09.09 14:35
Testo AG
Natural gas
The CO environmentmeasurement...
The draught measurement…
The differential pressuremeasurement ΔP…
Line diagram of the differential pressureΔP in a period of 3:15 mins
Continuous measurement of the differen-tial pressure ΔP over e. g. 5 mins
The result of the measurement: a nega-tive pressure exists (-4.31 hPa)
The CO concentration is in the permittedrange. The alarm threshold is not ex-ceeded
Display view in the course of the meas-urement during sensor zeroing
begins directly after the selection of the
corresponding measurement menu. Af-
ter the zeroing of the pressure sensor,
the determination of the differential pres-
sure between the surroundings and the
flue takes place.
Advantages of the new testo 330 LL:
· Graphically supported measurement
menu for the determination of the flue
draught with parallel core flow search
· Thanks to the integrated switchover
valve technology, the testo 330-2 LL
can remain in the flue during zeroing.
In the testo 330-1 LL, the probe must
be removed from the flue for zeroing
· The set alarm threshold will be shown
directly on the display
determines the CO concentration in the
ambient air. The measurement is pre-
sented in a simple graph. If the CO con-
centration is in the green range, the
recorded concentration is permitted and
the alarm threshold is not exceeded.
The red danger range indicates a too
high, not permitted CO concentration.
Advantages of the new testo 330 LL:
· Easy, graphic presentaion of the ad-
justable alarm thresholds
· With the help of the trend display, the
measurement curve can be followed
· The cursor marks the current CO con-
centration
· The instrument not only indicates the
violation of the alarm threshold opti-
cally, it also provides an audible alarm
takes place after selection of the meas-
urement menu "Differential pressure".
After setting up the pressure difference
required for the measurement, the
measurement curve can be followed di-
rectly in the display over a defined pe-
riod.
Advantages of the new testo 330 LL:
· The measurement curve of the differ-
ential pressure measurement can be
followed directly in the line diagram
· Using the logger function, the meas-
urement curve can be recorded over
a defined period of up to 120 minutes
We measure it.
04-05-t330 28.10.2011 11:59 Seite 5
6
testo 330 LL
The fine pressure probescan easily be attached atany measurement site – byloop or magnet
The instrument firmware and the
"easyheat" software are retro-
fittable free of charge:
www.testo.com/easyheat/Update.
The fine pressure probe is directly
connected to the flue gas analyzer
testo 330 LL. The different meas-
urement menus and the measure-
ment results are shown in the dis-
play of the testo 330 LL.
The following menus with buffer
stores are available:
· parallel draught measurement
· parallel ΔP measurement
· 4Pa measurement
· heating check
Simultaneous gas pressure meas-
urement and flue gas analysis is
possible with the fine pressure
probe. The gas pressure measure-
ment can be carried out in logger
operation, thus conducting a long-
term measurement.
Thanks to the zero point calibration
at 1 second intervals, external tem-
perature influences have no effect
on the measurement value.
For the measurement of the ambi-
ent temperature or the surface
temperature, an additional tem-
perature probe can be connected.
Thanks to the extended sensor life
of up to 6 years for O2 and CO in
the testo 330 LL, the follow-on
costs for the user are drastically
reduced. At least one O2 and CO
sensor replacement is saved
during the course of the typical
phase of use of the instrument. In
addition to this, Testo gives 4
years’ warranty on the complete
instrument incl. O2 and CO
sensors and probe.
Exception: Wearing parts such as filter, thermo-couple (12 months) NO/COlow sensor (24months)
The O2 long-life sensor
stands out against the
standard sensor through a
more stable design, an
improved diffusion barrier
to protect the anode
material and a lead-free
metal alloy. It is therefore
not only more durable but also
more environmentally friendly.
The fine pressure probe –highest accuracy in thePascal range
The sensor diagnosis – longlife with even more security
Highest accuracy
thanksto
zero-point adjustment at 1-seco
ndint
erva
ls
The graphic-capable display allowssensor diagnosis with traffic lightpresentation
OK
14.09.09 14:35
14.09.09 14:35
Sensor diagnosis
The sensor is OK.
OK
14.09.09 14:35
Natural gas
Testo AG
E draught
E draughtP
Individualmeasurement
ProgramE delta P
4 Pa measurement
Heating check
Instrument diagnosis
Error diagnosis
Instrument information
Sensor diagnosis
06-07-t330 28.10.2011 12:01 Seite 6
7
Smoke tester testo 308Information at www.testo.com
USB / IrDA / Bluetooth
USB / IrDA /Bluetooth
USB / IrDA /Bluetooth IrDA /
Bluetooth
IrDA / Bluetooth
The software package testo
easyheat and easyheat.mobile
The new top technology in flue gas
measurement: the instrument se-
ries testo 330 LL with extended
sensor life communicates not only
with a PC, but also with a Pocket
PC. Different software packages
give the customer the possibility of
adapting the testo 330 LL exactly
to his communication needs.
With the help of the PC software
easyheat, the management of cus-
tomer data, as well as the meas-
urement sites and the already
completed measurements, can be
carried out easily on a PC at home.
The Pocket-PC-Software easy-
heat.mobile supports wireless
communication to Windows Mo-
Wireless transfer*
* Country permits BLUETOOTH® wireless trans-fer for the smoke tester testo 308 and the fluegas analyzer testo 330 LLThe BLUETOOTH® wireless module used by Testohas permits for the following listed countries, andcan only be used in those countries, i. e. BLUE-TOOTH® wireless transfer may not be used in anyother country!
Europe including all EU member statesAustria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany,Great Britain, Greece, Hungary, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, Netherlands,Poland, Portugal, Romania, Slovakia, Slovenia,Spain, Sweden and Turkey
European countries (EFTA)Iceland, Liechtenstein, Norway and Switzerland
Non-European countriesUkraine, Colombia and El Salvador
Easy, mobile data management forflue gas analysis
bile appliances. This allows wire-
less transfer of measurement data
to a mobile appliance on site.
Printout of the data from a Pocket
PC or directly from the measuring
instrument takes place via the
IrDA/Bluetooth printer.
We measure it.
06-07-t330 28.10.2011 12:01 Seite 7
8
testo 330 LL
The robust and easy-to-hold probe
handle makes positioning easier.
The probe has a quick-release fas-
tener. This ensures that all gas
paths are connected and confu-
sion is impossible. The dirt filter
housed in the handle reliably filters
out dirt. In addition, the probes are
extremely easy to look after and
easy to clean. A range of lengths
and diameters ensure a high de-
gree of flexibility for all applications.
On replacement, the probe shaft is
simply placed on the probe handle
and it engages. Multi-hole and an-
nular gaps probes complete the
line of flue gas probes. Both the
ambient CO probe and the CO2
probe are automatically detected
by the instrument and the measur-
ing results appear immediately in
their own respective graphically
supported menu. Moreover, the
adjustable alarm threshold is linked
to an acoustic signal.
The entire scope of measurements
during checks can be carried out
alongside the flue gas measure-
ment.
The gas leak detection probe that
can be connected to the instru-
ment also has an adjustable alarm
threshold; a warning tone is emit-
ted if it is exceeded. The probe is
also detected automatically and
the results are shown as a graphic
trend display in a dedicated menu.
Thanks to the integration of the
gas tightness test into the meas-
urement menu, all relevant tests on
gas pipes can be conducted with-
out a separate measuring instru-
ment– the new testo 330 LL inte-
grates the gas tightness test. All
that is required for this is the con-
nection of the pressure set for gas
pipe tests to the testo 330 LL. The
testo 330 LL guides the user
through the entire measurement,
and facilitates it by the graphic pro-
cessing of the measurement data.
The probes – the right accessories for everyapplication
08-09-t330 28.10.2011 12:59 Seite 8
9
WARRANTY:4 YEARS*
EN 50379-2 and1. BImSchV
optionally with
New features of the testo 330 LL:
• Colour graphic display with 240 x 320 Pixel
• Graphic processing of measurement data
• New instrument design
• Instrument diagnosis function uses easy „traffic light’’ presentation to enable
comprehensive error diagnosis, diagnosis of sensors and the call-up of instrument
information such as the filling level of the condensate trap and the battery status
• Logger function for long-term measurements
• New measurement menus, e. g. Gas pipe test
and solid fuel measurement
• Pressure measurement up to 300 mbar
• User-defined fuels
The testo 330 LL is the reliable companion –- whether in cases of
malfunction or emergency, when monitoring legally set limit values, or in
day-to-day maintenance work.
Other features:
• Reduced follow-on costs thanks to LL sensors with 4 years’ guarantee
• Life expectancy up to 6 years (O2 / CO)
• At least 1 sensor replacement is saved in the course of a normal working life
• Powerful Li-ion rechargeable battery - life: >6 h with pump running,
no memory effect, no deep discharge
• Rechargeable battery can be charged separately and in instrument
• TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2, °C, hPa and
CO with H2-compensation
A measuring instrument with great ease of communication:
• Powerful memory management: 500,000 readings
• IrDa/ Bluetooth interface for data transfer to Pocket-PC / laptop / printer
• USB interface for data readout to a PC software
• ZIV (Central Guild Association) driver for all standard industry software
packages
Only for testo 330-2 LL
• In CO measurement, from 8.000 ppm, automatic dilution is carried out up to
min. 30,000 ppm CO
• Integrated gas and draught zeroing without probe removal: The probe can
The longlife sets with the new flue gas analyzer testo 330 LL
New testo 330-1 LL flue gas analyzer
New testo 330-2 LL flue gas analyzer
The Longlife set for heating constructors and fitters
The Longlife set for customer service and maintenance technicians
The Longlife set for inpectors
The Longlife set for service technicians and and inspectorswith fine pressure probe
testo 330-1 LL flue gas set H2 forheating constructors and fitters, incl.BLUETOOTH rech. battery andcalibration protocol; mains unit 100-240V for mains operation or charging therechargeable battery in instrument;combustion air temperature probe,length 190 mm; hose connection set for
separate gas pressure measurement;testo BLUETOOTH-printer with mainsunit; basic system case flat; flue gasanalyzer, length 300 mm, Ø 8 mm,Tmax. 500 °C; with graphic display;version 2010
testo 330-2 LL flue gas set H2 forcustomer service and maintenancetechnicans, incl. BLUETOOTH, rech.battery and calibration protocol; mainsunit 100-240 V for mains operation orcharging the rechargeable battery in theinstrument; combustion air temperature
probe, length 190 mm; hose connectionset for separate gas pressuremeasurement; Testo BLUETOOTHprinter with mains unit; basic systemcase flat; flue gas probe; lenght 300mm, Ø8 mm, Tmax. 500 °C
testo 330-2 LL flue gas set; testo 330-2LL (O2 and COH2), incl. BLUETOOTH,rech. battery and calibration protocol;mains unit 100-240 V for mainsoperation or charging the rechargeablebattery in the instrument; combustion airtemperature probe, length 190 mm;testo 308 smoke tester; soot pump
holder; flue gas probe, length 300 mm,Ø 8 mm, Tmax. 500 °C; basic systemcase with double floor for instrument,probes and further accessories; withgraphic display; verison 2010
testo 330-2 LL (O2 and COH2) flue gasset for service technicians andinspectors, incl.BLUETOOTH, rech.battery and calibration protocol; mainsunit 100-240 V for mains operation orcharging the rechargeable battery in theinstrument; combustion air temperatureprobe, length 190 mm; TestoBLUETOOTH printer with mains unit;easyheat software testo 330 for PC;USB connection cable, instrument-PC;flue gas probe, length 300 mm, Ø 8 mm,Tmax. 500 °C; fine pressure probe;capillary hoses; surface probe angled
90 °C; connection cable surface probe;straight Pitot tube; heating check retrofitCD; basic system case with double floorfor instrument, probes and furtheraccessories
0563 3371 70
0563 3372 70
0563 3372 72
0563 3372 71
Illustratuion maydiffer from original
Part no.
Part no.
Part no.
Part no.
In order to simplifiy selection, Testo has assembled special sets. These canof course be extended at any time from the wide selection of accessories.
The gas pipe test is integrated in the testo330 LL (see ill.). Order accessory 05541213, and if not included in the set, acces-sory 0554 1203.
The gas pipe test
testo 330-2 LL
testo 330-1 LL
Part no.
Part no.
0632 3307 70
0632 3306 70
testo 330-2 LL flue gas analyzer withlong-life gas sensors; BLUETOOTH®and H2-compensated CO-sensor aswell as integrated draught and gas ze-roing, incl. rech. battery and calibrationprotocol; graphic display
testo 330-1 LL flue gas analyzer withlong-life gas sensors; BLUETOOTH®and H2-compensated CO-sensor, incl.rech. battery and calibration protocol;graphic display
Basic system case testo 330-1/-2 LL with two levels for analyzer, probes and ad-ditional accessories
0516 3331
Basic system case testo 330-1/-2 LL for analyzer, probes and accessories 0516 3330
Tools system case with tools section without content, can be interlocked to basicsystem case
0516 0329
Universal system case w/o pockets, can be interlocked to basic system case 0516 0331
First name and surname
Company
Department
Street, No.
Postal code, city
Date, signature
Cases Part no.
Additional temperature probes
Additional probes
Probe accessories
Connection cable 0430 0143
Connection cable 0430 0143
ProbesQty.
Qty.
Part no.
Flue gas probe; length 180 mm; Ø 8 mm; Tmax. 500 °C; TÜV approval; probestop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included
0600 9760
Flue gas probe; length 300 mm; Ø 8 mm; Tmax. 500 °C; TÜV approval; probestop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included
0600 9761
Flue gas probe; length 180 mm; Ø 6 mm; Tmax. 500 °C; probe stop; NiCr-Nithermocouple; 2.2 m hose and particle filter included
0600 9762
Flue gas probe; length 300 mm; Ø 6 mm; Tmax. 500 °C; probe stop; NiCr-Nithermocouple; 2.2 m hose and particle filter included
0600 9763
Flue gas probe flexible; length 330 mm; Tmax. 180 °C; short-term 200 °C;bending radius max. 90 °C for measuring at inaccessible points; probe stop;NiCr-Ni-thermocouple; 2,2 m hose and particle filter included
Dual wall clearanceprobe for O2 supply airmeasurement
testo 330-1/-2 LL fine pressureprobe
0632 1260
0638 0330
Probe shaft multi-hole; length 300 mm; Ø 8 mm; for mean CO calculation 0554 5762
Probe shaft multi-hole; length 180 mm; Ø 8 mm; for mean CO calculation 0554 5763
testo 330-1/-2 LL / testo 350-S/-XL gas leakprobe; 0 to +10000 ppm CH4 / C3H8 0632 3330
testo 330-1/-2 LL / testo 350-S/-XL / testo 400ambient CO probe, for detecting CO in buildingsand rooms; 0 to +500 ppm
0632 3331
Ambient CO2 probe 0632 1240
Combustion air temperature probe, immersion depth 300 mm 0600 9791
Combustion air temperature probe, immersion depth 190 mm 0600 9787
Mini ambient air probe 0600 3692
Combustion air temperature probe, immersion depth 60 mm 0600 9797
Quick-action surface probe 0604 0194
Modular flue gas probes, available in 2 lengths, incl. positioning cone,NiCr-Ni thermocouple, 2.2 m hose and particle filter
Combustion air temperature probe
Option: Fine draught measurement, Resolution 0.1 Pa, measurement range to100 Pa (instead of the standard draught measurement)
testo 330-1 LL flue gas analyzer with long-life gas sensors; BLUETOOTH® andH2-compensated CO-sensor, incl. rech. battery and calibration protocol; graphicdisplay
testo 330-2 LL flue gas analyzer with long-life gas sensors and built-in draughtand gas zeroing; incl. O2-/CO-sensor; without H2-compensation, rech. batteryand calibration protocol; with graphic display
testo 330-2 LL flue gas analyzer with long-life gas sensors; BLUETOOTH® andH2-compensated CO-sensor as well as integrated draught and gas zeroing, incl.rech. battery and calibration protocol; graphic display
0632 3306 70
0632 3307
0632 3307 70
Option fine differential pressure measurement
Upgrade COlow-sensor; resolution 0.1 ppm, Measuring range 0 -to 500 ppm,resolution 0.1 ppm, for testo 330-1 LL/-2 LL
Retrofit BLUETOOTH® interface
0554 2103
0450 3338
Option: NO sensor, meas. range 0 to 3000 ppm, 1 ppm resolution
Option H2-compensated CO cell
testo 330-1 LL – The Longlife set for heating constructors and fitters
testo 330-2 LL – The Longlife set for customer service and maintenance technicians
testo 330-2 LL – The Longlife set for service technicians and and inspec-tors with fine pressure probe
testo 330-2 LL – The Longlife set for inpectors
Option COlow sensor
Option Bluetooth
Upgrade NO-sensor; 0 to 3000 ppm; resolution 1 ppm, for testo 330-1 LL/-2LL 0554 2151
0563 3371 70
0563 3372 70
0563 3372 71
0563 3372 72
Testo fast printer IRDA with wireless infrared interface; 1 roll thermal paper; 4 AAbatteries; for printing out measurements on site 0554 0549
Readout adapter for automatic furnaces testo 330-1/-2 LL 0554 1206
Mains unit international 100-240 V AC / 6,3V DC for mains operation or batterycharging in instrument , for mains operation or battery charging in instrument 0554 1096
Spare battery 2600 mA
Charger for spare battery
Pressure set for testing gas line testo 330-1/-2 LL version 2010
0515 0107
0554 1103
0554 1213
Spare thermal paper for printer; 6 rolls; permanent ink, permanent ink 0554 0568
Adhesive pockets testo 330-1/-2 LL for printout, paper barcode labels; 50 off 0554 0116
Instrument cleaner, 100 ml 0554 1207
Smoke tester with oil; soot sheet; for measuring soot in flue gas 0554 0307
Hose connection set for separate gas pressure measurement testo327 / testo 330-LL
0554 1203
Differential temperature set consisting of 2 pipe clamp probes and adapter testo330-1/-2 LL
0554 1204
Spare particle filter, 10 off 0554 3385
USB connection cable testo 330-1/-2 LL / testo 335, instrument to PC 0449 0047
ISO calibration certificate/flue gas 0520 0003
O2 sensor for testo 330-1 LL/-2 LL 0393 0002
CO sensor, H2-compensated, 0 to 8000 ppmfor testo 330-1 LL/-2 LL
0393 0101
Spare COlow sensor, 0 to 500 ppm for testo 330-1 LL/-2 LL 0393 0103
Spare NO sensor, 0 to 3000 ppm for testo 330-1 LL/-2 LL 0393 0151
Accessories
Spare gas sensors
Sets
Measuring instruments without options
Measuring instruments with options
Part no.
Part no.
Part no.
Part no.
Part no.
BLUETOOTH printer set with wireless BLUETOOTH interface; incl. 1 roll thermalpaper, rechargeable battery and mains unit 0554 0553
easyheat PC analysis software, shows measurement in form of diagrams, tablesand manages customer data. Please order USB cable 0449 0047 separately.
0554 3332
Full version easyheat and easyheat.mobile . Software package for PC and PocketPC.
0554 1210
Qty.
Qty.
Qty.
Qty.
Qty.
testo 330-1 LL flue gas analyzer with long life gas sensors, inkl. O2-/CO-sensor;without H2-compensation, incl. rech. battery and calibration protocol; with graphicdisplay
0632 3306
CO sensor (without H2-compensation) for testo 330-1 LL/-2 LL 0393 0051