FlexoGlobal TM · Our Anilox Roll Cleaners are not only backed by a 100% ... increased volume of air, increased ... accelerates heat and mass transfer by appropriate utilization

Your Portal to the Global Flexographic Industry

FlexoGlobalTM

April 2011

Innovative Drying Technology

Can Improve Productivity

Fea-

FlexoGlobalTM

FlexoGlobalTM

FlexoGlobal’s mission is to deliver top-notch technical articles authored by industry experts, industry updates on an international level, and business practices overviews to improve operating efficiencies.

PublisherLaura Wayland-Smith Hatch

[email protected]

Volume 4, No. 3

FlexoGlobalEditorial, Advertising, & Circulation Office

Salmon Creek Publishing7580 Salmon Creek Road

Williamson, NY [email protected]

315.589.8879

Copyright © 2011Salmon Creek Publishing

All rights reserved. None of the materials in this publication may be used, reproduced, or transmitted, in whole or in part, in any form or by any means, electronic or mechanical, including photocopying, recording, or the use of

any information storage and retrieval system without permission in writing from the publisher.

Would you like to join the growing list of contributing authors to FlexoGlobal?

Increase your visibility in the industry as a flexo printer/converter, supplier, or educator and increase your business on a global basis. Your articles will appear online and in the downloadable and printable PDF file so that you can print copies to use within your organization or with customers. Whether you have any potential articles or just

ideas for what you would like to see covered, we would certainly like to hear from you.

Send your artcle proposals to: [email protected]

3www.flexoglobal.comApril 2011 FlexoGlobal

Printing Doctor Blades

+1.704.844.2434

www.flxon.com Performance Through Quality

.

FLXON IS THE EXCLUSIVE DISTRIBUTOR IN CANADA – USA – MEXICO FOR

LIFE CAN BE GOOD AGAINYour blade life can be10 times longer with SWEDCUT

NO print defects were experiencedNO uneccessary press stops occurredNO blade end edge break

4 www.flexoglobal.com April 2011FlexoGlobal

To learn more, call 704.588.3371or Toll Free 866.588.8686

No one has more environmentally-friendly, Aluminum-safe ways to clean your anilox rolls than HarperScientific.

Call one of our cleaning specialists today—866.588.8686

Protect Your Anilox Investment.

Our Anilox Roll Cleaners are not only backed by a 100% performanceguarantee, they are both safe for your rolls, and safe for the world.Whether you need water based or solvent based products; in powders orliquids; by the gallon, box, tub or drum, we’ve got the proven solution.

HARPERSCIENTIFIC DIVISION

HARPERIMAGE.COMAmericas • Europe • Asia

©2008

To learn more, call 704.588.3371or Toll Free 800.438.3111

This Is What Total Commitment to Flexo Looks Like.

XLT Anilox Rolls are 100% performance guaranteed for quality and consistencyand supported by the most knowledgeable sales technicians in the industry.

ANILOX & COATING ROLLS DIVISION

A team of Flexo experts with knowledge of every aspect of the business. Provensolutions to make your plant run more efficiently from our Consulting Division.

GRAPHICSOLUTIONS DIVISION

Protect your Anilox investment with environmental-friendly, roll-safe cleaners, rollcovers, racks and accessories. Handproofers that save ink, substrate & press time.

HARPERSCIENTIFIC DIVISION

Free seminars at our advanced facility or coming to a city near you.

ROAD SHOWS & WALKINGSEMINARS

Scholarships, grants and funds invested in the future of the Flexographic Industry.

THE HARPER EDUCATION PROJECT

HARPERIMAGE.COMAmericas • Europe • Asia

©2008

To learn more, call 704.588.3371or Toll Free 800.438.3111

Print SHarper with Harper™

ANILOX & COATING ROLLS DIVISION

HARPERIMAGE.COMAmericas • Europe • Asia

XLT Anilox Rolls are 100% Performance Guaranteed.

Our SHarper System™

makes printing with them foolproof.

Call for our free booklet today—800.438.3111

Achieve unprecedented consistency and control in Flexographic printingwith 100% Performance Guaranteed Anilox Rolls and the provenSHarper System™. Developed by the industry’s leading innovator, ourrolls and “by the numbers” printing will deliver proven results at less cost.

©2008

To learn more, call 704.588.3371or Toll Free 800.438.3111

Harper GraphicSolutions is an entire division of expert Flexo consultants dedicated to helping you run

your entire plant more efficiently.

Call for details today—800.438.3111

Anilox Rolls Are Just Part Of The Story.

The team of experts that make up Harper’s GraphicSolutions Division canevaluate your pressroom’s hardware, software, workflow systems andprocedures, then develop a customized plan to cut costs, increase yourproduction and improve results. For proven solutions, call 800.438.3111.

GRAPHICSOLUTIONS DIVISION

HARPERIMAGE.COMAmericas • Europe • Asia

©2008

5www.flexoglobal.comApril 2011 FlexoGlobal

Get the new Kodak Flexcel NX Digital Flexographic System and challenge the traditional boundaries of flexo printing. Now you can print jobs never before possible with flexo. And help grow your business in ways you never imagined. Outstanding results. No compromises. Just gravure class quality in a revolutionary system that will change the way you look at flexo printing. Only from Kodak. Giving you the power to get more business.

Visit kodak.com/go/flexo©Kodak, 2008. Kodak and Flexcel are trademarks of Kodak.

Call 1-866-563-2533

6 www.flexoglobal.com April 2011FlexoGlobal

With over two million visitors,FlexoGlobal is Your Portal to the World of Flexo

Contact us at [email protected] to learn how you can give your company maximum exposure at a value that’s hard to beat!

Become a FlexoGlobal Sponsor& stand out from the crowd!

7www.flexoglobal.comApril 2011 FlexoGlobal

FlexoGlobalWebinars

http://www.flexoglobal.com/webinars.htm

LUX Technology Enables Better Flexo PrintPresenter: Timothy Gotsick, Ph.D., Global Director of

Innovation, MacDermid Printing Solutions

Optimizing Your Packaging WorkflowPresenter: Dominic Ibarra, Printing Specialist, Technical

Applications Group (TAG), Kodak

Proofing in the Packaging Production WorkflowPresenter: Calvin Curtice, Worldwide Proofing Program Manager, Kodak Sustainable Flexo - Solvent or Thermal Processing?Presenter: Robin Montmaueur, Director Packaging Segment Marketing Americas, Eastman Kodak Company

8 www.flexoglobal.com April 2011FlexoGlobal

Technology

Innovative Drying Technology Can Improve Productivity

By Gene Plavnik, Heat Technologies, Inc.

9www.flexoglobal.comApril 2011 FlexoGlobal

In today’s mercurial economy, it is increasingly difficult for any printer/converter to remain profitable. Pressures

come from multiple sources: the fluctuating cost of utilities, the rising costs of raw materials, and the continuous demand for better utilization of ecologically friendly resources from consumers and vendors. Therefore, it is important for the printers/converters of flexible materials—whether décor paper or aluminized film—to keep abreast of available and innovative technologies, which can help them satisfy their customers while conducting a successful and profitable business.

The choice of press operation is driven by the demand for quality and the specific end use of the printed material. That translates into using solvent or water-based inks, which require some method of drying versus using ultraviolet or electron beam inks, which are cured using mercury lamps or an electron beam. Solvent-based ink technology has its own Regenerative Thermal Oxidizer (RTO, or incinerator); associated maintenance costs; and environmental compliance requirements—which have become even more complex as the world moves towards the use of “greener” materials.

Comparing the AlternativesThe utilization of water-based inks in general does not require RTO, and thus costs are lower than the operational cost of solvent-ink-based printing equipment. Continuous improvements in the quality of water-based inks are noticeable, and they have broadened their applications. However, to have successful transfer from one type of ink to another, one needs to have efficient drying technology at his disposal. It is well known that drying water-based (or sometimes even solvent-based) ink is a challenge because of the increased residence time, when a heavy load of inks or coatings is applied. This really translates into slowing the web speed of a press to accommodate the drying.

The reason for more residence (drying) time is the formation of a boundary layer on the material during the printing process. What is a boundary layer? Imagine for a minute, a large lake. In the summer, the sun comes up and begins evaporating moisture off the lake. After a few hours, a sunny day turns into a cloudy day because as the moisture rises from the lake, clouds are formed. These clouds then act as a barrier. So later in the day the sun is above the clouds delivering the same amount of energy, but less of

© 2011 Gene Plavnik, Heat Technologies, Inc.

Figure 1: Front View of booster section for 63” wide press (exhaust shroud removed)

10 www.flexoglobal.com April 2011FlexoGlobal

Technology

the sun hits the lake directly so less moisture is removed. Similarly, the boundary layer forms on the surface of the material as it moves through the production process and acts like an invisible shield against hot air coming from the drying station. This invisible shield does not allow air to penetrate the surface of the ink and start the evaporation process. Increasing heat and air increases the amount of moisture that is evaporated, but at a lower efficiency until the process flat lines. OEMs of printing equipment used increased volume of air, increased temperature, even angle of attack, to tackle this problem, but it had rather limited effect.

Using Acoustics for DryingSo how can sound technology benefit drying? First some background. Think of sound that you experience at a loud rock concert—sound that you feel as you walk closer and closer to a large speaker that is filling the concert hall with someone’s definition of music. That feeling is in fact a pressure wave brought about by the movement of air created by the speaker. Now, certainly, no manufacturing operation is looking to increase the amount of noise. However, that sound power can be harnessed in a very careful way, so it is harmless to human hearing and is safe in the workplace.

In addition, you might notice that the pressure as you approach that speaker wasn’t constant. Rather, it fluctuated or varied. The oscillation of pressure is another important thing to consider. Think of things where pressure is not constant—i.e., a jack hammer, hammer drill, and impact wrench. These devices make it possible to achieve a result that the same amount of constant pressure couldn’t achieve. It is the same with drying—the oscillation of ultrasound adds to the effect. Heat and air are more efficient at removing moisture in the presence of sound because the oscillating pressure wave affects the boundary layer.

Some BackgroundThe acoustic technology developed by Heat Technologies, Inc. had its beginnings with pulse combustion that accelerates heat and mass transfer by appropriate utilization of acoustic oscillations with mean flow of the combustion gases. This was successfully applied in water heating, boilers, drying of minerals, sand, sludge, and so on. However, the company’s original technology cannot be applied in flexible packaging, converting and coating because of oscillating flame directly impinging on the material. The reason is simple—it is a fire hazard.

Figure 2: Side view of 63” booster section and exhaust shroud (top portion).

11www.flexoglobal.comApril 2011 FlexoGlobal

Driven by actual demand for accelerated drying of water- and solvent-based inks and adhesives, the company expanded its knowledge of combining hot air flow with strong acoustic oscillations and developed a product line of drying systems, Spectra HE ™ Ultra, for that specific application. The drying system is an advanced convective or hot-air-based system. However, in this case, the hot air acts like a skilled massager by providing the boundary layer formed on the material with micro massage to make it more pliable, and, as a result, it makes drying more efficient. These systems are energy independent—they can use hot air derived from indirect or direct heating process, as well as preheat the air by an inline electric heater. Most important and a key element of accelerated drying is its ability to efficiently disrupt the boundary layer formed on the material during the printing process and, thus, allow the process to be conducted with a lower operating temperature of the hot air at advanced web speeds.

Acoustic Drying Technology BenefitsThe benefits of the technology are not marginal (meaning 5 to10%). Rather, they are considerable, as follows:

• Uptoa70%increaseinwebspeed—lessresidencetime under the drying station means the press can operate at higher speeds.

• Uptoa75%reductioninenergyconsumption• Thesameorlowerprocessairtemperature—even

with increased speed, the process air temperature will be the same or less than your current operation.

• Upto50%lessplantairforwater-basedapplications. This means additional energy savings because plant air conditioning costs can be high. (Solvent-based solutions are limited by LFL considerations.)

• Uptoa67%smallerfootprint—generally,the length of the new drying system will be significantly less than the current system.

The technology has application for both narrow- and wide-web operations as a replacement to existing between-colors drying sections (usually with heavy ink load or adhesive loads), or as a booster section, where physical space allowed an installation. In both situations, throughput increased from 50% to 85% with 17-20% of added energy. Accelerated speeds were registered on shrink film, thermally sensitive papers, with utilization of eco-friendly inks. It is important to note that other factors besides press

Figure 3: Control Panel, Blower on a movable cart with dryer section in background on right.

Figure 4: Front View of a between-colors replacement section for 26” side press.

12 www.flexoglobal.com April 2011FlexoGlobal

Technology

speed must be taken into consideration. Improved drying is possible, but in most cases it was maxed out by limiting factors of maximum speed, wind and unwind, sufficient ink laying, etc. The Spectra HE Ultra drying systems can be adapted by any press that utilizes water- or solvent-based inks or adhesives, where replacement of the drying section is possible, or be added as an extended range, and of course, where drying, coating, etc. is a bottleneck.

It is important to note that the systems are very compact and they may be of assistance to the operators whose footprint could be improved. Additional savings may apply to the reduction of material cost, due to a more compact dryer, cost of labor to produce more material, less capital expenditures, etc. It is important also to note that maintenance managers become our best advocates, because our dryers are of advanced design, but low in maintenance, which is a subtle, but noticeable contributor to the operational cost.

Web Width

Dry Weight% of

SolidsApplication

Type of Installation

Existing Technology Spectra HE Ultra

Inch(m)lb/ream (g/m2)

% Adhesive, InkReplacement, b/c, Add-on

Max Speed, ft/min (m/

min)

Energy Used MMBtu/hr

(kW)

Max Speed, ft/min (m/

min)

Energy Used kW

16 (0.4) 2 (3.15) 30Water-based

inkReplacement,

b/c260 (81) (37) 387 (120) 5.2

52 (1.32) 1.27(2) 30Water-based

adhesiveRetrofit 700 (217) (145) 1350(418) 20

26 (0.66)Overhead/

Tunnel Dryer30

Water-based ink

Replacement 600 (186) 1.0 (293 ) 600 45

71 (1.8) 1.27(2) 30Water-based

adhesiveRetrofit 700 (217) (200) 1400(434) 50

20 (0.51) 1.9 (3) 30Water-based

inkReplacement

b/c580 (180) (90) 806 (250) 18

Table 1. Summary of the major operating parameters when Spectra HE Ultra replaced original drying technology, wide web.

Conclusions:The innovative Spectra HE Ultra Drying systems can help printers increase their profit margins and meet production goals by improving drying as a bottle neck for increased speed operation of a rotogravure or flexo press due to the advanced nature of the design combined with low maintenance and high efficiency.

Gene Plavnik is President of Heat Technologies Inc. (HTI).

FlexoGlobal is a “Hot“ Publication! Just look for the typed out hyperlinks or blue text in the body of articles and click! And don’t forget that all advertisements are “hot” as well. Just slide your mouse over the page and off you go!

14 www.flexoglobal.com April 2011FlexoGlobal

Technology

Roselle, NJ • Atlanta, GA • LaPalma, CA • Batavia, IL • Palmyra, NJ • Vaughan, Canada • Warrington, UK

VISIT US AT WWW.PAMARCOGLOBAL.COM

SS-6500 Ultrasonic Cleaning System• Cleansupto18"presswidth• 6.0Gallonsolution• 117volt,60Hzelectricalequipment• 14Gauge,193/4"longstainlesssteeltank• Tankincludesheater,stainlesssteelcover,andballvalvedrain• Builtinultrasonicgeneratorwithtimer(0-30minutes)delivering600-watts

ofpowerat42Khz• FrequencySweepTechnology• RemovableStainlessdualmotorrotatingunitwithspecialgripbeltdrive• Stainlesssteeldualsupportslidebarsystem-infinitelyadjustable• Onefree6GallonSONICKLEENcleaningsolution• Operator'sManual• 1YearLimitedWarranty

Even Mom can't clean this good!When it comes to cleaning anilox rolls. No one can clean an anilox roll better and more gently then Sonic Solutions. Sorry Mom, not even you.

For complete information visit www.sonicsolutionsusa.com

Our Most Popular Anilox Roll Cleaning System

The Sonic Solutions family of Ultrasonic Anilox Roll Cleaners are unsurpassed when it comes to a fast, simple, low-cost, high-quality method of keeping your rolls at full cell volume.