This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Notes• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).• Cree XLamp CXB1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.** Flux values @ 25 °C are calculated and for reference only.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18 V (IF = 700 mA, TJ = 85 °C)
The following table provides order codes for XLamp CXB1310 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 21).
NominalCCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm) @ 85 °C
Flux (lm) @ 25 °C** Group Order Code Group Order Code Group Order Code
Notes• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).• Cree XLamp CXB1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.** Flux values @ 25 °C are calculated and for reference only.
NominalCCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm) @ 85 °C
Flux (lm) @ 25 °C** Group Order Code Group Order Code Group Order Code
3500 K
80 ---M2 1380 1504
35H
CXB1310-0000-000F0HM235H
35G
CXB1310-0000-000F0HM235G
M4 1485 1618 CXB1310-0000-000F0HM435H
CXB1310-0000-000F0HM435G
90 92K2 1200 1308
35H
CXB1310-0000-000F0UK235H
35G
CXB1310-0000-000F0UK235G
K4 1290 1406 CXB1310-0000-000F0UK435H
CXB1310-0000-000F0UK435G
3000 K
80 ---M2 1380 1504
30H
CXB1310-0000-000F0HM230H
30G
CXB1310-0000-000F0HM230G
M4 1485 1618 CXB1310-0000-000F0HM430H
CXB1310-0000-000F0HM430G
90 92J4 1120 1221
30H
CXB1310-0000-000F0UJ430H
30G
CXB1310-0000-000F0UJ430G
K2 1200 1308 CXB1310-0000-000F0UK230H
CXB1310-0000-000F0UK230G
2700 K
80 ---K4 1290 1406
27H
CXB1310-0000-000F0HK427H
27G
CXB1310-0000-000F0HK427G
M2 1380 1504 CXB1310-0000-000F0HM227H
CXB1310-0000-000F0HM227G
90 92J4 1120 1221
27H
CXB1310-0000-000F0UJ427H
27G
CXB1310-0000-000F0UJ427G
K2 1200 1308 CXB1310-0000-000F0UK227H
CXB1310-0000-000F0UK227G
2200 K 80 --- J4 1120 1221 22G CXB1310-0000-000F0HJ422G
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18 V (IF = 700 mA, TJ = 85 °C) - CONTINUED
Notes• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).• Cree XLamp CXB1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.** Flux values @ 25 °C are calculated and for reference only.
FLUX CHARACTERISTICS, PREMIUM COLOR ORDER CODES AND BINS - 18 V (IF = 700 mA, TJ = 85 °C)
Notes• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).• Cree XLamp CXB1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.** Flux values @ 25 °C are calculated and for reference only.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36 V (IF = 350 mA, TJ = 85 °C)
The following table provides order codes for XLamp CXB1310 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 21).
NominalCCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm) @ 85 °C
Flux (lm) @ 25 °C** Group Order Code Group Order Code Group Order Code
Notes• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).• Cree XLamp CXB1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.** Flux values @ 25 °C are calculated and for reference only.
NominalCCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm) @ 85 °C
Flux (lm) @ 25 °C** Group Order Code Group Order Code Group Order Code
3500 K
80 ---M2 1380 1504
35H
CXB1310-0000-000N0HM235H
35G
CXB1310-0000-000N0HM235G
M4 1485 1618 CXB1310-0000-000N0HM435H
CXB1310-0000-000N0HM435G
90 92K2 1200 1308
35H
CXB1310-0000-000N0UK235H
35G
CXB1310-0000-000N0UK235G
K4 1290 1406 CXB1310-0000-000N0UK435H
CXB1310-0000-000N0UK435G
3000 K
80 ---M2 1380 1504
30H
CXB1310-0000-000N0HM230H
30G
CXB1310-0000-000N0HM230G
M4 1485 1618 CXB1310-0000-000N0HM430H
CXB1310-0000-000N0HM430G
90 92J4 1120 1221
30H
CXB1310-0000-000N0UJ430H
30G
CXB1310-0000-000N0UJ430G
K2 1200 1308 CXB1310-0000-000N0UK230H
CXB1310-0000-000N0UK230G
2700 K
80 ---K4 1290 1406
27H
CXB1310-0000-000N0HK427H
27G
CXB1310-0000-000N0HK427G
M2 1380 1504 CXB1310-0000-000N0HM227H
CXB1310-0000-000N0HM227G
90 92J4 1120 1221
27H
CXB1310-0000-000N0UJ427H
27G
CXB1310-0000-000N0UJ427G
K2 1200 1308 CXB1310-0000-000N0UK227H
CXB1310-0000-000N0UK227G
2200 K 80 --- J4 1120 1221 22G CXB1310-0000-000N0HJ422G
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36 V (IF = 350 mA, TJ = 85 °C) - CONTINUED
Notes• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).• Cree XLamp CXB1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.** Flux values @ 25 °C are calculated and for reference only.
FLUX CHARACTERISTICS, PREMIUM COLOR ORDER CODES AND BINS - 36 V (IF = 350 mA, TJ = 85 °C)
Bin codes and order codes are configured as follows:
Order Code Bin Code
SSSSSCC-HHHH-HHHGGRNNNNN
Series = CXB13
Internal code
CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Z = 95 CRI minimum
Kit code
Vf class F0 = 18-V class N0 = 36-V class
Performance class
SSSSSCC-WWW-FF-GGR-AAAAA
Series = CXB13
Chromaticity bin
Vf class F0 = 18-V class N0 = 36-V class
Internal code
CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Z = 95 CRI minimum
Flux bin
Performance class
MECHANICAL DIMENSIONS
Dimensions are in mm.
Tolerances unless otherwise
specified: +.13
x° +1°
Meaning of B1310X
B1310F = 18‑V CXB1310
B1310N = 36‑V CXB1310
SIZE
TITLE
OF
REV.
SHEETC
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300Fax (919) 313-5558
4600 Silicon DriveDurham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125X° ± .5°
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH: 1.6
13.35± 0.2
13.35± 0.2
1.0 ± .15
0.55 ± 0.1
2.86
4.19
2.60
2.60
1.22
1.22
1.22
2.60
1.22
2.60
R.500
± 0.26.0
± 0.27.50
2/18.000BLE1401
LE1401 MARKETING SPEC
05/08/12D. CRONIN
REVISONSREV DESCRIPTION BY DATE APP'D
TOLERANCE UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MM.X ± .10.XX ± .03.XXX ± .010 X° ± 1 °
MeasurementsThe luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Pre-Release Qualification TestingPlease read the LED Reliability Overview for details of the qualification process Cree applies to ensure long‑term reliability for XLamp
LEDs and details of Cree’s pre‑release qualification testing for XLamp LEDs.
Lumen MaintenanceCree now uses standardized IES LM‑80‑08 and TM‑21‑11 methods for collecting long‑term data and extrapolating LED lumen maintenance.
For information on the specific LM‑80 data sets available for this LED, refer to the public LM‑80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
RoHS ComplianceThe levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh ComplianceREACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative
to insure you get the most up‑to‑date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
UL® Recognized ComponentThis product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision AdvisoryWARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
Cree CXB1310 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 100
LEDs per carton. Each carton contains 100 LEDs from the same performance bin.
Dimensions are in inches.
Tolerances: +.13
x° +1°
SIZE
TITLE
OF
REV.
SHEET
CDRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon DriveDurham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °.XXX ± .25.XX ± .75.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125X° ± .5 °
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH: 1.6
5.875
5.875
.875
.875
R .375
2/28.000
ACXA1310
LE1401 MARKETING SPEC
05/08/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
LABEL WITH CREE BIN CODE,QUANTITY, LOT #
LABEL WITH CREE BIN CODE,QTY, LOT #
BAG
PATENT LABEL IS LOCATED ON UNDERSIDE
OF COVER
LABEL WITH CREE BIN CODE,QTY, LOT #
SIZE
TITLE
OF
REV.
SHEET
CDRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon DriveDurham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °.XXX ± .25.XX ± .75.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125X° ± .5 °
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH: 1.6
5.875
5.875
.875
.875
R .375
2/28.000
ACXA1310
LE1401 MARKETING SPEC
05/08/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
LABEL WITH CREE BIN CODE,QUANTITY, LOT #
LABEL WITH CREE BIN CODE,QTY, LOT #
BAG
PATENT LABEL IS LOCATED ON UNDERSIDE
OF COVER
LABEL WITH CREE BIN CODE,QTY, LOT #
PATENT LABEL IS LOCATEDON UNDERSIDE OF CARTON
LABEL WITH CREE BIN CODE, QUANTITY, LOT #
SIZE
TITLE
OF
REV.
SHEET
CDRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °.XXX ± .010.XX ± .03.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005X° ± 1 °
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon DriveDurham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION