CDS_Eclipse E2_Catalogue

ECLIPSE E2

Wood - Max 40 kg per panel

ECLIPSE

The window as a new piece of furniture: no longeronly a tool of protection and closing environments, buta new way of conceiving space.

With ECLIPSE the window changes shape, change its appearance, it changes lives.

ECLIPSE allows to create folding door andwindow in wood, clad (wood-aluminum) or wood-bronzeand aluminum, making it an added value for each house.

ECLIPSE SYSTEMSSystem for folding doors and windows

The window can be flat, rounded or angular; in the lattercase without need for a column in the middle.

Versatile, easy to install and assemble, the ECLIPSEwindow gives the house an higher gear.

ECLIPSE becomes the new philosophy of life: the varioustypes satisfy all requirements.

The six lines of the ECLIPSE system allow to realize windows of high value for every situation, both internal andexternal, alwasy following the same philosophy: the view becomes panoramic.

ECLIPSE allows to create folding doors and windows thatcan reach 16 meters in width and 3 or 4 meters in height,depending on the type of system selected.

ECLIPSE System provides the window opening is toboth outward or inward, to resolve all need of space.

In wood, wood-aluminum, or wood-bronze.Any combination is possible: ECLIPSE system is the mostversatile system.

FEATURES

Completeness of the systemProvides all the necessary elements for the construction of thewindow: the upper track, the lower track or the sill, hinges, carrier, dropbolt, seals and lock with cylinder.ECLIPSE, never been easier.


ECLIPSE, never been easier.

Easy construction of the frame and the panelsPanels all the same, smooth, without rebate. Frame and the bottom frame of easy construction.The accessories are all applied in support. The only milled from buildon the panels are for the housing upper and lower dropbolts and seals.


Adjusting to window installedECLIPSE allows to adjust the window when the window is installed, without remove thepanels. The vertical adjustment occurs when the window is mounted, acting on the lower carriers; while the lateral adjustmente occurs on the hinge side of the frame.

Vertical adjustment Lateral adjustment

LINEAR WINDOWS

Can make window wide up to 16 meters, with a 16 total panels, forup to 8 panels for side, opening outward or inward.

Any combination is possible, such as: 4 left panels, or 5 right panels,8 left panels, or 3 left panel + 8 right panels, or 1 left panel + 5 right panels, etc.ECLIPSE, never been easier.

CURVED WINDOWS

Can make curved windows,opening outward or inward.The only important element to be considerer is the measurementof the radius, that should not be less than 4 meters.The upper and the lower tracks are curved to measure.Although it is curved, the window does not change: the panels


Although it is curved, the window does not change: the panelsare all square, smooth, withouth rebated, and all the same, justas linear window.ECLIPSE, never been easier.

WINDOWS AT AN ANGLE

Can create two windows to close two side of a room, withoutthe need of a column in the corner. The windows are all the same, with the only except that the last leaf of each side will present the rebate to facilitate the closing of the window.


SHUTTER OR INTERNAL PARTITIONS

The ECLIPSE System allows to create even shutters, or internal partitions. These shutters can be installed even in the presence of a window existing sliding doors, thus providing thedarkening function.ECLIPSE, never been easier.

All ECLIPSE System are composed of identical elements, which differ only dependingon the flow rates of the different systems.

At the bottom ECLIPSE Systems can provide for the application of a track as exemplifiedin the figures below.

The bottom track can be completely embedded in the floor, resulting in a window with a flat base and absolutely not cumbersome.Ideal for close porches, conservatories or other environmentsthat do not require specific performance of resistance to weathering.

Bottom track encased in a wooden bottom frame

Bottom track into the floor

ECLIPSE SYSTEMSFeatures - The lower tracks

Bottom track encased in a wooden bottom frameIn case of a window opening to the outside, the bottomtrack can be encased into a wooden bottom frame,resulting in a window with a bottom internal rebate that allows excellent performance of resistance to agents atmospheric.

In case of window opening to the inside, the bottomtrack can be encased in a woodden bottom frame, resulting in a window with a external bottom rebate thatallows excellent performance of resistance to agents atmospheric.

In a particular situation such as a garae, where there is not require performance of resistance to weathering, the bottom track can be encased directly in the floorwith a ramp.

Bottom track encased in a wooden bottom frame

Bottom track encased in a concrete ramp

All ECLIPSE System are composed of identical elements, which differ only dependingon the flow rates of the different systems.

At the bottom ECLIPSE Systems can provide for the application of a sill as exemplifiedin the figures below.

In this case there is a window with outward opening.The sill is applied to a wooden bottom frame with internalrebate. The minimum height recommended for optimalperformance of resistance to agents atmospheric is 25 mm.

Aluminum sill for outward opening with small sizeIn case of window opening outward, the sill can be

ECLIPSE SYSTEMSFeatures - The sill

Aluminum sill for outward opening

In case of window opening outward, the sill can be applied in wooden bottom frame, always with a internalrebate.If, howewer, has required a shift in a compact size, the internal bottom rebate may be reduced a minimunheight of 15 mm.

In this case there is a presence of a window with outward opening,which does not require special performance of resistance toweathering. Therefore, it is possible to apply the sill ina wooden bottom frame, withouth rebate.

For the lateral extremities of the sill are set plastic end caps, if you do not provide wooden claps.

Aluminum sill for outward opening - Winter Garden Applications

ECLIPSE E2Wood - Max 40 kg for panel

ECLIPSE E2

ECLIPSE E2 is the system designed for window of light weight or only in wood, withouth glass, such as shutters orinternal partitions.

The maximum weight of each panel should not exceed 40 kg,in the limit of 16 panles, with 8 panels per side. The ECLIPSE E2 system allows to make a window from the total weight of 6,40 tons.

With ECLIPSE E2 System the panels can reach the maximum height of 3 meters and the maximum width of 1 meter.

The panel thickness can be from 35 to 85 mm.ECLIPSE E2 is to use in the lower part the bottom track or the aluminum sill.


Whenever we collaborate with architects, designers and engineers, we are surprised at

Thank to the ECLIPSE Systems you can give free rein to the imagination:the wiew can be panoramic.

how much entusiasm, satisfaction and creativity radiating with ECLIPSE Systems.

16 mts40 kg

1 meter3 meters

35-858+8

out/in

RESISTANCE TO ATMOSPHERIC AGENTSSignificant results of water resistance is canobtain both the outward and inward opening.Thanks to equal and smooth shape of the panelsand to seals that work under pressure, can ADJUSTMENTachieve excellent results of air and The vertical adjustment occurs when

the window is mounted. It acts on the top carriers, as evidenced in the figure

wind resistance.

maximum weight for panelmaximum width for panelmaximum height for panelpanel thickness in mmmaximum panels numberopening


ECLIPSE E2: Technical specificationsmaximum opening in widht

top carriers, as evidenced in the figurebelow.

PROVEN PERFORMANCEManufactured in the highest grade of stainlesssteel, brass, aluminum and plastic elements ofhigh quality, all components of E2 Systemwere subjected to stringet laboratory test, including testing of cyclic operation (achieved50.000 cycles), corrosion, structural capacityand comprehensive analysis of all elements.This allows to reach unparalleled resultsfor a system with raised to the ceiling. Extremely fluid, silent.silenzioso.

EASY INSTALLATION AND ADJUSTMENTThe installation and the assembley could not be more easier: all hardware is applied in support to the window.

This innovative hinge system allows so to make panel with the samesize, with a flat profile, and without rebate.

The lateral adjustament occurs actingon the pivot hinge in the frame.

To one side is shown the development of a window, for example, with 4 panels all on one side.

Providing all the same panels, the folding window created with ECLIPSE E2 Systemmust be constructed in accordance with the gaps indicated in Figure 1.Among the frame tothe first panel the gap must be 7 mmAmong panel to panel the gap must be 4 mm.

Fig. 1

ECLIPSE E2Technical details

Fig. 1

In the Figure 2 we can see that, once closed the window, observed gap in the construction of the frame allows the ermetic closing of the panel, thanks to seals that act under pressure.It should be noted that the gap between the leaves is given automatically by hinges, which have a thickness of 4 mm.

Fig. 2

ECLIPSE E2 System: Application with bottom track

Technical DetailsECLIPSE E2

ECLIPSE E2 System: Application with aluminum sill

ECLIPSE E2Technical Details

Finish Price

All. Nat.

All. Nat.

All. Nat.

All. Nat.

All. Nat.

All. Nat.

Nylon

Nylon

Nylon

All. Nat.

All. Nat.

All. Nat.

All. Nat.

Whit/Brow

E3CDSECR Closing right cup for sill

E3CDSECL Closing left cup for sill

AQ21-W/B Seal for frame

E22FCP6 Poly channel mm 6000

E3CDSM42N Bottom sill mm 4200

E3CDSM57N Bottom sill mm 5700

E22FCR6N Bottom track mm 6000

E22FC24 Poly channel mm 2400

E22FCP4 Poly channel mm 4000

14TAM6N Top track mm 6000



Code DescriptionTRACKS AND SEALS



ECLIPSE E2Finish Inox - Price List

ECLIPSE E2 -Finish Inox

Whit/Brow

Whit/Brow

Whit/Brow

St.Steel

St.Steel

St.Steel

, St.Steel

St.Steel

St.Steel

St.Steel

St.Steel

St.Steel

St.Steel

St.Steel

St.Steel

E22HNHS Single hinge set

E22EHS External handle

E22HSS Hinge set

E22HNHSS No handle hinge set (3 ps.)

E22HHNHS Single half offset hinge

E2CRCSS Right hand carrier set

E22HHSS Half offset hinge set

E22HHNHSS No handle half offset hinge set

E22WPSS Wall pivot set

E2CICSS Intermediate carrier set

E2CLCSS Left hand carrier set

AQ63-W/B Seal for panel

AQ109-W/B Seal for closing panel

CARRIERS AND HINGESE2CPSS Pivot set

AQ21-W/B Seal for frame

CDS CENTRO DISTRIBUZIONE SICUREZZA SRL35010 LIMENA (PD) - ITALY - Via Pierobon 129

T. +39 049 8841502 F. +39 049 8846168

www.cdslimena.it - [email protected]

CDS_Eclipse E2_Catalogue

Documents