Page:1 ASTM A192/ ASME SA192 ASTM A192 belongs to the carbon seamless tubes, which is specially designed for high, middle, low pressure purpose in seamless carbon steel boilers and as super heater tubes. ASTM A192 Specification for Seamless Carbon Steel Boiler Tubes for High - Pressure Service ASTM A192 —– American Society for Testing Materials standard ASME SA192 —- American Society of Mechanical Engineers standards This guide covers standard specifications for minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, and silicon. The tubes shall have a hardness number not exceeding a specific value. The following mechanical tests shall be conducted, namely: flattening test; flaring test; hardness test; and hydrostatic test. This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
3
Embed
ASTM A192/ ASME SA192 - IMPORFERRI S.C.C. · ASTM A192/ ASME SA192 ASTM A192 belongs to the carbon seamless tubes, which is specially designed for ... wall-thickness, seamless carbon
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page:1
ASTM A192/ ASME SA192 ASTM A192 belongs to the carbon seamless tubes, which is specially designed for
high, middle, low pressure purpose in seamless carbon steel boilers and as super
heater tubes.
ASTM A192 Specification for Seamless Carbon Steel Boiler Tubes for High
-
Pressure Service
ASTM A192 —– American Society for Testing Materials standard
ASME SA192 —- American Society of Mechanical Engineers standards
This guide covers standard specifications for minimum-wall-thickness, seamless carbon steel boiler and
superheater tubes for high-pressure service. The steel shall conform to the required chemical composition
for carbon, manganese, phosphorus, sulfur, and silicon. The tubes shall have a hardness number not
exceeding a specific value. The following mechanical tests shall be conducted, namely: flattening test;
flaring test; hardness test; and hydrostatic test.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part
of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does
not give any warranty express or implied or make any representation that the contents of this abstract are