This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Thrush® mufflers carry a 90-day warranty against defects in materials or craftsmanship. Any modifications to the product or use inconsistent with the intended application voids this warranty. Parts and labor are not covered.
Warranty claim information or assistance may be obtained by writing:
Warranty Department / TennecoOne International DriveMonroe, MI 48161
Available for vintage muscle cars and trucksThrush® Turbo Mufflers are included in the systemMost systems feature 2.5-in. Aluminized smooth bend pipesH-pipe balance tube is included in the systemAll accessories needed for installation are included
THRUSH® TURBO HEADERBACK SYSTEMS
SCAN FOR YOUR
17931 | OFFSET - CENTER24253 | CENTER - CENTER
24256 | CENTER - CENTER24255 | CENTER - CENTER24254 | CENTER - CENTER
All measurements are in inches. Configuration is shown as inlet - outlet. Shell diameter is shown as height x width. Inlet/outlet diameter is ID.
SHELL LENGTH
141414141414
OVERALL LENGTH
18.518.518.518.52020
SHELL DIAMETER4.25 x 9.754.25 x 9.754.25 x 9.754.25 x 9.754.25 x 9.754.25 x 9.75
OUTLET DIAMETER
2.252.252.52.53.03.0
PART NO.179311793217933179341793517936
SCAN FOR YOUR
TRI-FLOW TECHNOLOGYFully Aluminized construction for long lifeHigh gloss red powder coat finishThrush Logo embossed on muffler coverAvailable in 2.25-in., 2.5-in., or 3-in. inlet and outletReversible for maximum flexibilitySingle chamber design for very aggressive tone
100-percent Welded Aluminized steel constructionAvailable in 2.25-in., 2.5-in., 3-in. or 4-in. inlet and outletDirectional flow, non-reversible18-in. Overall lengthHigh-Temp black finish
THRUSH® MAD HOTTHRUSH® RATTLER
Application ChartINLET
DIAMETER2.252.53.04.0
CONFIGURATIONCenter - CenterCenter - CenterCenter - CenterCenter - Center
All measurements are in inches. Inlet/outlet diameter is ID.
17713 | OFFSET - CENTER 17715 | OFFSET - CENTER 17718 | OFFSET - CENTER17711 | OFFSET - CENTER
TRI-FLOW TECHNOLOGYTri-flow design provides that Thrush® classic sound100-percent Aluminized coated shell for long lifeAvailable in 2-in., 2.25-in. or 2.5-in. inlet and outletReversible for maximum flexibility
TRI-FLOW TECHNOLOGYFully Aluminized construction for long lifeFiberglass matting for better sound controlThrush Logo embossed on muffler coverAvailable in 2.25-in., 2.5-in., or 3-in. inlet and outletReversible for maximum flexibility
THRUSH® TURBOHUSH THRUSH™
Application Chart
17631 | OFFSET - CENTER 17635 | OFFSET - CENTER17633 | OFFSET - CENTER
All measurements are in inches. Configuration is shown as inlet - outlet. Shell diameter is shown as height x width. Inlet/outlet diameter is ID.
SHELL LENGTH
141414141414
OVERALL LENGTH
18.518.518.518.52020
SHELL DIAMETER4.25 x 9.754.25 x 9.754.25 x 9.754.25 x 9.754.25 x 9.754.25 x 9.75
OUTLET DIAMETER
2.252.252.52.53.03.0
PART NO.176311763217633176341763517636
SCAN FOR YOUR
Application Chart
ALUMINIZED Construction +
TRI-FLOW Technology+
TRI-FLOW Technology
FIBERGLASS Matting
+
+
ALUMINIZED Construction +
SCAN FOR YOURSCAN FOR YOUR
STRAIGHT-THROUGH TECHNOLOGYStraight-through design for maximum flow and powerHeavy-gauge steel shell constructionAvailable in 1.75-in., 2-in., 2.25-in., 2.5-in., or 3-in. inlet and outlet304 Polished Stainless Steel or High Gloss Red Powder Coat FinishDual outlet models available
TWO CHAMBER TECHNOLOGY100-percent Welded construction for durability and extended life
Fully Aluminized construction for long lifeThrush Logo embossed on muffler coverDirectional flow, non-reversibleAvailable in 2.25-in., 2.5-in. or 3-in. inlet and outlet
A4.25
A4.25
D3.0
D3.0
C4.0
C4.0
B3.375
B3.375
All measurements are in inches. Configuration is shown as inlet - outlet. Inlet/outlet diameter is ID. 1 Fully reversible. 2 Fits with 3-in. header collector.
All measurements are in inches. Configuration is shown as inlet - outlet. Shell diameter is shown as height x width. Inlet/outlet diameter is ID.
SHELL LENGTH
131715131313131313131313131313
OVERALL LENGTH
192321191919191919191919191919
SHELL DIAMETER4.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.504.00 x 9.50
OUTLET DIAMETER
2.25 (2)2.25 (2)2.5 (2)
3.02.52.25
2.25 (2)2.5 (2)2.252.53.02.252.53.0
2.5 (2)
PART NO.176301763717638176491765017651176521765317655176561765717658176591766017661
17657 | OFFSET - CENTER
17630 | CENTER - DUAL 17659 | OFFSET - OFFSET
17638 | OFFSET - DUAL 17661 | CENTER - DUAL
17650 | CENTER - OFFSET
17652 | CENTER - DUAL
17655 | OFFSET - CENTER 17658 | OFFSET - OFFSET
17637 | DUAL - DUAL 17660 | OFFSET - OFFSET
17649 | CENTER - OFFSET
17651 | CENTER - OFFSET
17653 | CENTER - DUAL
17656 | OFFSET - CENTER
HEAVY-GAUGE Steel Shell Construction HIGH GLOSS Red Powder Coat or 304 Polished Stainless Steel Finish