Buy the Fluke 754 Process Calibrator or Fluke 729 Automatic
Pressure Calibrator and get a FREE Fluke Pressure ModuleBetween
September 28 and December 31, 2020 purchase a Fluke 729 or Fluke
754 Calibrator and receive a valuable pressure tool worth up to
$2,650!
The Fluke 754:• Calibrate temperature, pressure, voltage,
current, resistance and frequency• Easily troubleshoot HART
instrumentation• Document field calibration results• Newly enhanced
firmware, improved battery life, USB port and 99.7 %
confidence level• Included models
- FLUKE-754 Process Calibrator- FLUKE-754/750SW BU Process
Calibrator and Software bundle- FLUKE-754/154 BU Process Calibrator
and HART Communicator bundle
The Fluke 729:• Automatic pressure generation and regulation to
300 psi• Automatic internal fine-pressure adjustment• Built-in leak
testing for verifying test setups for leakage• Included models:
- FLK-729 300G Pressure Calibrator- FLK-729 300G FC Pressure
Calibrator- FLK-729 150G Pressure Calibrator- FLK-729 150G FC
Pressure Calibrator- FLK-729 30G Pressure Calibrator- FLK-729 30G
FC Pressure Calibrator- 729/750SW Pressure Calibrator and Software
bundle
Redemption form must be emailed within 30 days of purchase. A
receipt/invoice may only be submitted once.
Fluke process calibrators Work smarter. Work faster.
UNDER PRESSURE?
Here’s how to redeem: 1. Purchase a Fluke 729 Automatic Pressure
Calibrator or Fluke 754 Documenting Process Calibrator
from an Authorized Distributor in the United States between
September 28, 2020 and December 31,2020.
2. Complete this redemption form. Be sure to indicate which
pressure module you would like to receive.
3. Within 30 days of purchase, email this completed form with a
copy of your original sales invoice orreceipt to
[email protected]. Emails received after 30 days of purchase
will be declined andwill not be returned.a. This offer cannot be
combined with any current or future Fluke Corporation offers.b.
Redemption documentation must be emailed; documentation will not be
accepted via mail or fax.c. Invoice or receipt must clearly
validate “date of order.”d. One redemption form can be used for
multiple unit purchases, but model and number of units must be
noted on
redemption form and complete proof of purchase (invoice or
receipt) must be included with the redemption from.
e. Redemption must be emailed to [email protected] within
30 days of purchase.
Please provide the purchase details for the eligible product(s).
See page 3 for available pressure modules.
Place of purchase* Date of purchase* Fluke pressure module model
number*
Fluke calibrator model number* Purchase price* Quantity* Total
item cost
$
*Required
Did the Under Pressure promotion impact your buying
decision?
Yes, I decided not to buy another brand because of the
promotion. Yes, I was originally planning to buy at a later date.
Yes, I was not originally planning to make a purchase. No, I would
have made my purchase regardless. No, I found out about this
promotion after buying.
How did you hear about this promotion?
From my Fluke Sales person From my Fluke Distributor From Fluke
advertisement (email, social media) From Fluke website
First name Last name
Company nameOccupation
Mailing address (no PO boxes please) City
E-mail
PhoneState/Province Zip/Postal code Country
Your contact information
750P00 0 to 1 Inch H2O (0 to 2.5 mBar)
750P01 0 to 10 Inch H2O (0 to 25 mBar)
750P02 0 to 1 (0 to 70 mBar)
750P22 0 to 1 (0 to 70 mBar)
750P03 0 to 5 (0 to 350 mBar)
750P23 0 to 5 (0 to 350 mBar)
750P04 0 to 15 (0 to 1 Bar)
750P24 0 to 15 (0 to 1 Bar)
750P05 0 to 30 (0 to 2 Bar)
750P06 0 to 100 (0 to 7 Bar)
750P27 0 to 300 (0 to 20 Bar)
750P07 0 to 500 (0 to 35 Bar)
750P08 0 to 1000 (0 to 70 Bar)
750P09 0 to 1500 (0 to 100 Bar)
750P2000 0 to 2000 (0 to 140 Bar)
750P29 0 to 3000 (0 to 200 Bar)
750P30 0 to 5000 (0 to 340 Bar)
750P31 0 to 10000 (0 to 700 Bar)
750PA3 0 to 5 (0 to 350 mBar)
750PA4 0 to 15 (0 to 1 Bar)
750PA5 0 to 30 (0 to 2 Bar)
750PA6 0 to 100 (0 to 7 Bar)
750PA27 0 to 300 (0 to 20 Bar)
750PA7 0 to 500 (0 to 35 Bar)
750PA8 0 to 1000 (0 to 70 Bar)
750PA9 0 to 1500 (0 to 100 Bar)
750PV3 -5 (-350 mBar)
750PV4 -15 (-1 Bar)
750PD2 -1 to 1 (-70 to 70 mBar)
750PD3 -5 to 5 (-350 to 350 mBar)
750PD10 -10 to 10 (-700 to 700 mBar)
750PD4 -15 to 15 (-1 to 1 Bar)
750PD5 -15 to 30 (-1 to 2 Bar)
750PD50 -15 to 50 (-1 to 3.5 Bar)
750PD6 -15 to 100 (-1 to 7 Bar)
750PD7 -15 to 200 (-1 to 14 Bar)
750PD27 -15 to 300 (-1 to 20 Bar)
750R04 0 to 15 (0 to 1 Bar)
750R06 0 to 100 (0 to 7 Bar)
750R27 0 to 300 (0 to 20 Bar)
750R07 0 to 500 (0 to 35 Bar)
750R08 0 to 1000 (0 to 70 Bar)
750R29 0 to 3000 (0 to 200 Bar)
750R30 0 to 5000 (0 to 340 Bar)
750R31 0 to 10000 (0 to 700 Bar)
750RD5 -15 to 30 (-1 to 2 Bar)
750RD6 -12 to 100 (-1 to 7 Bar)
750RD27 -12 to 300 (-0.8 to 20 Bar)
750P3IN 0 to 3 inch (0 to 7.5 mBar)
750P5IN 0 to 5 inch (0 to 12.5 mBar)
Pressure modulesChoose one (1) tool from the list below as your
free gift with each Fluke 729 Automatic Pressure Calibrator or
Fluke 754 Documenting Process Calibrator purchased. Add the model
number of your chosen pressure module to the table at the bottom of
the previous page.
©2018-2020 Fluke Corporation. Specifications subject to change
without notice. 9/2020 6011473f-en
Offer terms and conditions: Sponsored by Fluke Electronics
Corporation, 6920 Seaway Bou-levard, Everett WA 98203. Gift with
purchase (the “Under Pressure Promotion”) is available for a
“Qualifying Fluke Purchase” (Fluke 729 or Fluke 754) made from an
authorized Fluke distribu-tor in the United States between
September 28, 2020 and December 31, 2020. This offer may not be
combined with any current or future Fluke Corporation offers. Offer
is open to legal U.S. residents and/or businesses currently
residing or physically located in the United States and the
District of Columbia. Void in Puerto Rico, all other U.S.
territories and possessions and over-seas military installations
and where prohibited or otherwise restricted by law, rule or
regulation. All federal, state and local laws and regulations
apply. Employees, directors and officers of Fluke Electronics
Corporation in the United States (the “Sponsor”), its parent
companies, af-filiated companies, subsidiaries, distributors,
representatives, and those persons’ immedi-ate families (parents,
siblings, children and spouse) and persons living in the same
household (whether related or not) are not eligible to participate
in the Promotion. Employees, directors and officers of competing
tool manufacturers are also ineligible to participate in the
Promotion. A receipt may only be submitted once; receipts submitted
more than once are considered in-valid. For a list of authorized
distributors visit https://www.fluke.com/en-us/where-to-buy.
Redemption requests emailed after 30 days of purchase will be
invalid and will not be returned. Redemption forms must be filled
out accurately to qualify. Please allow 6 to 8 weeks after
Sponsor’s receipt of a complete redemption form to receive your
gift with purchase. This offer is not transferable or assignable.
View complete Official Terms and Conditions at
www.fluke.com/UnderPressureTC.
First name: First nameLast name: Last nameOccupation:
OccupationCompany name: Company nameMailing address no PO boxes
please: Mailing addressCity: CityStateProvince:
State/provinceZipPostal code: Zip/postal codeCountry: CountryPhone:
Email: EmailYes I decided not to buy another brand because of the
promotion: OffYes I was originally planning to buy at a later date:
OffYes I was not originally planning to make a purchase: OffNo I
would have made my purchase regardless: OffNo I found out about
this promotion after buying: OffFrom my Fluke Sales person: OffFrom
my Fluke Distributor: OffFrom Fluke advertisement email social
media: OffFrom Fluke website: OffPlace of purchaseRow1: Date of
purchaseRow1: Fluke pressure module model numberRow1: Fluke
calibrator model numberRow1: Purchase priceRow1: QuantityRow1:
Total item cost: