RAMPING RIDE FOLD AWAY LIFT - The RPH Series is a mid size lift designed to handle a variety of operator’s needs. Dual lift cylinders provide great support & stability. The RPH can
Post on 25-Sep-2020
0 Views
Preview:
Transcript
RAMPING RIDE FOLD-AWAY LIFT
RPH Series 2500 / 3300 lbs
APPLICATION
The RPH Series is a mid size lift designed to handle
a variety of operator’s needs. Dual lift cylinders
provide great support & stability. The RPH can fit
both lower bed height intercity trucks and larger dock
height trucks.
The 50” x 85” wide platform is large enough to
handle pallet jacks, wheeled carts or bulky loads.
The RPH is the cost effective bridge between the
smaller platform half-dip ride models and the large
platform premium level ride models.
Dual lift cylinders for great load stability
Fully galvanized finish - STANDARD
Half-dip ride platform (St/Al or Al/Al)
Power down - STANDARD
Self-locking valves on all cylinders
Heavy duty bed extension and side steps
www.dhollandia.com
www.dhollandia.com
STANDARD FEATURES MAIN OPTIONS
• Cab shutoff switch with harness (on/off only)
• 102" widening blocks to extend the bed extension
• Flexible side steps with 12" rubber dock bumper
• 2-button handheld remote on spiral cable
• Dual spring loaded cart stops
• 3-Piece under ride guard
• Cycle counter for hydraulic power pack
• Short 19" single side step
• Lightweight full aluminum platform
• Walk ramp kit (verify bed height w/ DHOLLANDIA)
REQUIRES MIN. 43” FLOOR HEIGHT
• Galvanized finish on steel components
• Power-down operation
• Full length ground and power cables
• Self-locking valves on the cylinder, with a manual
override function
• Cylinder with piston rods in hard-chromed
stainless steel
• Sealed weather-proof pump unit with thermo-
protected electromotor
• Heavy duty bed extension and side steps (fits 96”
or 102” wide body)
• Low-maintenance bushings & zerks in pivot points
• 250 amp inline mega fuse circuit protection
Heavy duty bed extension & side steps Self-lock valves with manual override 1/2 Steel 1/2 Alu. platform (optional)
Weights include the DHOLLANDIA bed extensions and side steps
DHOLLANDIA US Inc. ● 270 Southridge Parkway, Bessemer City, NC 28016 ● sales.USA@dhollandia.com
Toll free (855) 856-8225 ● Tel: (909) 251-7979 ● Fax: (909) 357-1554
Capacity lbs Platform Size Floor Height Floor to Tube Lift Overhang Approx. Weight
2500 St/Al or Full Alu 50” x 85” 39” - 51” 16” - 25” 34” - 42” 1100 / 960 lbs.
3300 St/Al or Full Alu 50” x 85” 39” - 51” 16” - 25” 34” - 42” 1100 / 960 lbs.
www.anjerinc.com 800-326-5373 sales@anjerinc.com
top related