RAMPING RIDE FOLD-AWAY LIFT RPH Series 2500 / 3300 lbs APPLICATION The RPH Series is a mid size lift designed to handle a variety of operator’s needs. Dual lift cylinders provide great support & stability. The RPH can fit both lower bed height intercity trucks and larger dock height trucks. The 50” x 85” wide platform is large enough to handle pallet jacks, wheeled carts or bulky loads. The RPH is the cost effective bridge between the smaller platform half-dip ride models and the large platform premium level ride models. Dual lift cylinders for great load stability Fully galvanized finish - STANDARD Half-dip ride platform (St/Al or Al/Al) Power down - STANDARD Self-locking valves on all cylinders Heavy duty bed extension and side steps
2
Embed
RAMPING RIDE FOLD AWAY LIFT - The RPH Series is a mid size lift designed to handle a variety of operator’s needs. Dual lift cylinders provide great support & stability. The RPH can
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
RAMPING RIDE FOLD-AWAY LIFT
RPH Series 2500 / 3300 lbs
APPLICATION
The RPH Series is a mid size lift designed to handle
a variety of operator’s needs. Dual lift cylinders
provide great support & stability. The RPH can fit
both lower bed height intercity trucks and larger dock
height trucks.
The 50” x 85” wide platform is large enough to
handle pallet jacks, wheeled carts or bulky loads.
The RPH is the cost effective bridge between the
smaller platform half-dip ride models and the large
platform premium level ride models.
Dual lift cylinders for great load stability
Fully galvanized finish - STANDARD
Half-dip ride platform (St/Al or Al/Al)
Power down - STANDARD
Self-locking valves on all cylinders
Heavy duty bed extension and side steps
www.dhollandia.com
www.dhollandia.com
STANDARD FEATURES MAIN OPTIONS
• Cab shutoff switch with harness (on/off only)
• 102" widening blocks to extend the bed extension
• Flexible side steps with 12" rubber dock bumper
• 2-button handheld remote on spiral cable
• Dual spring loaded cart stops
• 3-Piece under ride guard
• Cycle counter for hydraulic power pack
• Short 19" single side step
• Lightweight full aluminum platform
• Walk ramp kit (verify bed height w/ DHOLLANDIA)
REQUIRES MIN. 43” FLOOR HEIGHT
• Galvanized finish on steel components
• Power-down operation
• Full length ground and power cables
• Self-locking valves on the cylinder, with a manual
override function
• Cylinder with piston rods in hard-chromed
stainless steel
• Sealed weather-proof pump unit with thermo-
protected electromotor
• Heavy duty bed extension and side steps (fits 96”
or 102” wide body)
• Low-maintenance bushings & zerks in pivot points
• 250 amp inline mega fuse circuit protection
Heavy duty bed extension & side steps Self-lock valves with manual override 1/2 Steel 1/2 Alu. platform (optional)
Weights include the DHOLLANDIA bed extensions and side steps
DHOLLANDIA US Inc. ● 270 Southridge Parkway, Bessemer City, NC 28016 ● [email protected]