Transcript
Inspired by nature,powered by technology.
Who We Are
Our VisionTo be recognized as a reference company in packaging solutions and devices for the health markets.
Our MissionTo produce plastic solutions adequate to the needs of each client.Adequately remunerate invested capital.Create a rewarding work environment to our Staff.
Company
1993
Birth
2000 2002 2004 2006
ISO 9001:1995
Class 100.000(laminar flow room)
New Facility (Sobral Monte Agraço)
CE Marking (Measuring function
Medical Devices)
1995 1996
For QualityProject
1st PackageProduced
1998
ISO 9001:2000
2008
Class 100.000(20m^2 room)
2009
ISO 9001:2008
Past
Drug Master Filein Europe and USA
Evaluation of the DMF requisites
ISO 15378Primary Packaging Materials
for Medicinal ProductsNormative requirements analysis
ISO 14001Environmental
Management SystemsAdoption of the norm
requisites until the end of 2010
OHSAS 18001Occupational Health and
Safety Adoption of the norm requisites
until the end of 2010
NP 4457 Research, Development and
Innovation ManagementAdoption of the norm
requisites until the end of 2010
Future
Work in Progress
Financial and Human Resources Departmentjuliorufino@neutroplast.com
Commercial Departmentjoaoredol@neutroplast.com
Integrated Management Systems Department
mjosegalvao@neutroplast.com
Planning and Production Department
vascodias@neutroplast.com
Improvement Committee
Administrationmanuelaredol@neutroplast.com
ruiredol@neutroplast.com
Department of Development, Research e Innovation
goncalopocas@neutroplast.comjoaoalmeida@neutroplast.com
paulasequeira@neutroplast.com
Purchasesjoaoalmeida@neutroplast.com
Sales Managementanasalvador@neutroplast.com
Customer Supporteugeniasimao@neutroplast.comjoaojoaquim@neutroplast.com
Company
Values
INDIVIDUAL
GROUP
RESULT
Responsibility
Ethics
Will and Determination
Continuous Improvement
Quality
Team Work
Commitment
Innovation
Respect
Skill
Accountability
Quality Policy
Neutroplast exists for the satisfaction of the interests of each one of itsClients, Stockholders, Staff and society in general, and thereby is willingto congregate efforts for the satisfaction of the group, which will in turnamount to satisfying their individual needs.
The Improvement of our Processes and Products aims at eliminatingactivities with no added value, for the supplying of an ever betterservice.
The Motivation of our Staff is based on the recognition of their skills andthe permanent adaptation of the work environment.
To uphold the Management System consolidated at Norm NP EN ISO9001, organizing and integrating it to answer to the requisites of normsNP EN 4457, ISO 18001 and ISO 14001.
Management System
Process Network
0,00
0,50
1,00
1,50
2,00
2,50
3,00
3,50
2004 2005 2006 2007 2008 2009
Portugal Export
September 2009
Sales Data
International References
Portuguese References
Countries where Neutroplast’s products can be found
World Presence
Pharmaceutical
Fairs and Exhibits
September 2009
Idea, Design, Engineering (2D/3D) e Prototype
Design & Engineering Fast Prototypes
Client Exclusive ProductDesigned Packaging
Mould
Projects
Printing
Assembly
Manufacturing
Clean Room
Production
• Extrusion Blow Moulding, Injection Blow Moulding and Injection
Moulding;
• Laminar flow and classified assembly room Class 100,000 (ISO 8));
• Capacities until 500 ml;
• Raw-materials according to the European Pharmacopoeia and food
types contact;
• Bottles, Caps and Medical Devices;
• Printing by Serigraphy and Pad-Printing and automatic assembly
services;
• 58 employees in 2009 with an average age of 35 years;
• 40.000 production hours in 2009;
• Production in 24 hours a day, 7 days a week shifts.
September 2009
Summary
RDI Project Management
Development and Innovation
NP 4457:2007
«Knowledge being the basis of wealth generation on advanced societies and research and development the main sources of creation of that knowledge, its at innovation where the
means of transforming that knowledge into economical development is found.»
Development through Innovation has the potential to:– Increase the quality of customer service, by making the process more effective and efficient;– Increase the quality of the Neutroplast product;– Boost the seeding and growth of new business opportunities;– Improve the communication and information of projects to all the interested parts, proactively
involving everyone responsible;– Contribute to the knowledge management inside Neutroplast, consolidating the scientific and
technological assets of the organization.
RDI Project Management
1 – Project Initiation
2 – Project Planning
3 – Project Execution and Control
4 – Project Closure
Start
End
RDI Project Management
RDI Project Management
Process Project Initiation Sub-Process
ObjectiveTo define and describe the Project, based on the analysis of the problem or opportunity and the
identification of objectives to accomplishTo analyse the project in its most relevant aspects
Main Activities
Customer Requirements
Provisional Specifications
Product and Process Analysis
Client Proposal Approval
No
Yes
PLANNING
Process Project Planning Sub-Process
Objective To program every activity in the project and its sequence, in such a way that its possible toestimate the critical aspects towards the success of the project.
Main Activities
Activity Chronogram
Resource Planning
EXECUTION AND CONTROL
RDI Project Management
Process Execution and Control Sub-Process
ObjectiveExecute e control the activities defined on the Project Planning sub-process, guaranteeing its
efficacy, through the monitoring of deviations and through actions that minimize the impact ofthose deviations.
Main Activities
Control Actions
Approval CLOSURE
Mould Execution
Tests
Material and equipment
acquisition...
YesNo
RDI Project Management
24
Process Project Closure Sub-Process
Objective Evaluate the results of the project according to what was defined initially, promoting the creationof knowledge.
Main Activities
1º Production Lot
Customer Delivery
ApprovalNo
Control Actions
Yes
RDI Project Management
Case Study – Vaginal Actuator
Case Study – Vaginal Actuator
Products
Product Lines – Pill Bottles
A line mainly meant for solid products, such as pills, capsules and gelatin capsules, which can bemanufactured with HDPE and if you want to personalize it, be decorated it with our printing services.When your product/drug needs to be protected against moisture we have an integrated solution,together with our partners, to avoid and prevent this situation.
Available Sizes (ml) 30, 50, 85, 125, 200
Raw materials HDPE
Neck Finish 33 & 50
Standard Colour White
Closures & Accessories Screw & Tamper Evident Closures
Technologies
Extrusion blow moulding (EBM)
Injection blow moulding (IBM)
Injection Moulding (IM)
Services
3D Design
Assembling
Custom Moulding/Printing
Product Lines – Dropper
A line which has its purpose mainly for ear and eye drops usage. Can be produced in Transparent,White or in a personalized color PE. We can provide its production in a laminar flow Classified 100.000(ISO8) area and a specific package for further sterilization, either by Gama Rays or Ethylene Oxide.
Available Sizes (ml) 10, 15, 20, 30, 50, 60, 100, 125
Raw materials HDPE, LDPE
Standard Colour White
Closures & Accessories
Screw & Tamper Evident Closure
Screw & Tamper Evident & CR Dropper
Technologies
Extrusion blow moulding (EBM)
Injection blow moulding (IBM)
Injection Moulding (IM)
Services
3D Design
Assembling
Clean Room Production
Custom Moulding/Printing
Sterilization
Product Lines – Dosing (CE marking)
A line meant for liquid medicines (i.e. medicinal syrup). It is exclusively designed with EuropeanPharmacopoeia raw materials. The dosed cups are prepared to fit into PFP28 plastic or aluminumcaps, which are available with standard or specific printings or engravings. We can also provide theproduction in a laminar flow Classified 100.000 (ISO 8) area.
Available Medical Devices Cups and Spoons
Raw materials PP
Dosage
Cup 15 (2.5-5-7.5-10-15)
Cup 20 (2.5-5-7.5-10-15-20)
Cup 25 (2.5-5-7.5-10-15-20-25)
Spoon (2.5-5)
Standard Colour Transparent
Services
3D Design
Assembling
Clean Room Production
Custom Moulding/Printing
Product Lines – Multi-Market
This multi-purpose line is meant mainly for liquids (for e.g. nasal solutions and medicinal syrups) andcan be manufactured with PE. If you wish to personalize it, we can provide custom printing throughour printing services. Different kind of closures (Disc-top, Snap-top, Tamper Evident) and pumps(screw, clinch and snap-on) are available for these models.
Available Sizes (ml) 12, 15, 18, 20, 30, 50, 60, 70, 100, 125
Raw materials HDPE
Neck Finish From 18 to 28
Standard Colour White and Transparent
Closures & Accessories
Screw , Clinch and Snap-On Pumps
Tamper Evident Closures
Snap-Top and Disc-Top Closures
TechnologiesExtrusion blow moulding (EBM)
Injection blow moulding (IBM)
Services
3D Design
Assembling
Clean Room Production
Custom Moulding/Printing
Sterilization
NEUTROPLASTNEUTROPLASTZona Industrial Casal da Espinheira, lote 10Zona Industrial Casal da Espinheira, lote 1025902590--057 Sobral de Monte Agraço 057 Sobral de Monte Agraço -- PORTUGALPORTUGALTel: + 351 261 940 100Tel: + 351 261 940 100Fax: + 351 261 943 175Fax: + 351 261 943 175neutroplast@neutroplast.comneutroplast@neutroplast.comwww.neutroplast.comwww.neutroplast.com
top related