2017 Eaton Corporation, All Rights Reserved. D 154M2-105-1

NOTES:

MATERIAL:1.

HOUSING:UL94 V-0 PBT THERMOPLASTIC•

BUS BARS: TIN PLATED COPPER•

INPUT STUDS: NICKEL PLATED BRASS•

INGRESS PROTECTION RATING: IP66 WHEN USED WITH COVER,2.SEAL, AND SEALING CONNECTORS.

VENTED WITH GAS PERMEABLE, WATER-TIGHT VENT TO3.NORMALIZE INTERNAL PRESSURE

RATING: MAX 200 AMPS TOTAL (MAX 100 AMPS PER INPUT STUD)4.

CONNECTIONS: FOR USE WITH DELPHI APEX CONNECTION SYSTEMS5.MATING CONNECTOR PART NUMBERS:

J1: DELPHI 55251400•

J2: DELPHI 54201012•

J3: DELPHI 54201009•

J4: DELPHI 54201010•

PDM CAPABLE OF CONTROLLING 14 RELAYS WITH SERIES FUSES, PLUS6.14 INDEPENDANT FUSES

THREADED MOUNTING INSERT TIGHTENING TORQUE 24 IN-LBF MAX7.

INPUT STUD TIGHTENING TORQUE 70 IN-LBF MAX8.

154M2-105-1

CUSTOMER NUMBER

BASE MOUNTING THREADS2 - M5 X 0.8

VERSION

REVISIONSREV. DESCRIPTION ECO NO DATE ECO BY

A PRODUCTION RELEASE ECO-123716 2017/06/30 PDB CHANGED F27 FROM 5A TO 10A. ECO-132459 2017/12/20 A.L

D

C

B

A

B

C

D

12345678

8 7 6 5 4 3 2 1

INDICATES CRITICAL CHARACTERISTIC (MUST MEET CPK REQUIREMENTS)

CAPSULE AROUND DIMENSION INDICATES INCOMING INSPECTION REQUIRED

SCALETHIRD ANGLE PROJECTION

1 OF 41:2REV 7/14 - Size B

UNLESS OTHERWISE SPECIFIED DIMENSIONS

ARE IN MILLIMETERS

EATON CORPORATION - CONFIDENTIAL AND PROPRIETARYNOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION

THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE

EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME, BY TAKING POSSESSION OF THIS DOCUMENT. THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS

DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE

CASE OF CONFLICTING CONTRACTUAL PROVISIONS. THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.©2017 Eaton Corporation, All Rights Reserved.

XX.XX.XX

30.50.13

SHEET

REVISION

BSIZE

BDRAWING NUMBER 154M2-105-1-SALES

TITLE mRFRM,GENERIC,METRIC,W/COVER SALES

A

DRAFTER/DESIGNER DATE(YYYY/MM/DD)

P. DENIS 2017/06/30ENGINEERING APPROVED

K. PFLUEGERCHANGE RESPONSIBILITY ECO No

ECO-132459TUALATINCLASS CODE

1

ENG/MFG REFERENCE

ELECTRONIC ASSEMBLY

154M2-105-1

DRAWING IN ACCORDANCE WITH

ASME Y14.100 - 2013ASME Y14.1M - 2012[ASME Y14.1 - 2012]ASME Y14.5 - 2009

MATERIAL:

FINISH:

RELATED DOCUMENT:CPCD - TRANSPORTATIONTUALATIN, OR

XX.X

10.5

IN ACCORDANCE WITH CRP-SS-01-01-03 SUPPLIER

MANUAL

2017/06/30

Page: 1 of 4

108

43

65

197

2X INPUT STUDSM8 X 1.25

70

216

235

124

4X THREADED MOUNTING INSERTS

M5 X 0.8

94

216

199

215

96

11 TYP

4X 5.6

70

4X R10

R1.00

MOUNTING CUT OUT DIMENSIONS

mRFRM DESIGNED TO BE MOUNTED FROM REAR OF PANEL

28

SHOWN WITH NO COVEROR COMPONENTS

D

C

B

A

B

C

D

12345678

8 7 6 5 4 3 2 1

INDICATES CRITICAL CHARACTERISTIC (MUST MEET CPK REQUIREMENTS)

CAPSULE AROUND DIMENSION INDICATES INCOMING INSPECTION REQUIRED

SCALETHIRD ANGLE PROJECTION

2 OF 41:2REV 7/14 - Size B

UNLESS OTHERWISE SPECIFIED DIMENSIONS

ARE IN MILLIMETERS

EATON CORPORATION - CONFIDENTIAL AND PROPRIETARYNOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION

THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE

EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME, BY TAKING POSSESSION OF THIS DOCUMENT. THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS

DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE

CASE OF CONFLICTING CONTRACTUAL PROVISIONS. THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.©2017 Eaton Corporation, All Rights Reserved.

XX.XX.XX

30.50.13

SHEET

REVISION

BSIZE

BDRAWING NUMBER 154M2-105-1-SALES

TITLE mRFRM,GENERIC,METRIC,W/COVER SALES

A

DRAFTER/DESIGNER DATE(YYYY/MM/DD)

P. DENIS 2017/06/30ENGINEERING APPROVED

K. PFLUEGERCHANGE RESPONSIBILITY ECO No

ECO-132459TUALATINCLASS CODE

1

ENG/MFG REFERENCE

ELECTRONIC ASSEMBLY

154M2-105-1

DRAWING IN ACCORDANCE WITH

ASME Y14.100 - 2013ASME Y14.1M - 2012[ASME Y14.1 - 2012]ASME Y14.5 - 2009

MATERIAL:

FINISH:

RELATED DOCUMENT:CPCD - TRANSPORTATIONTUALATIN, OR

XX.X

10.5

IN ACCORDANCE WITH CRP-SS-01-01-03 SUPPLIER

MANUAL

2017/06/30

Page: 2 of 4

TOP VIEWCOVER AND COMPONENTS REMOVED BOTTOM VIEW

SHOWING CONNECTOR LOCATIONS

INPUT STUDS

J1

J2

J3

J4

D

C

B

A

B

C

D

12345678

8 7 6 5 4 3 2 1

INDICATES CRITICAL CHARACTERISTIC (MUST MEET CPK REQUIREMENTS)

CAPSULE AROUND DIMENSION INDICATES INCOMING INSPECTION REQUIRED

SCALETHIRD ANGLE PROJECTION

3 OF 41:2REV 7/14 - Size B

UNLESS OTHERWISE SPECIFIED DIMENSIONS

ARE IN MILLIMETERS

EATON CORPORATION - CONFIDENTIAL AND PROPRIETARYNOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION

THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE

EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME, BY TAKING POSSESSION OF THIS DOCUMENT. THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS

DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE

CASE OF CONFLICTING CONTRACTUAL PROVISIONS. THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.©2017 Eaton Corporation, All Rights Reserved.

XX.XX.XX

30.50.13

SHEET

REVISION

BSIZE

BDRAWING NUMBER 154M2-105-1-SALES

TITLE mRFRM,GENERIC,METRIC,W/COVER SALES

A

DRAFTER/DESIGNER DATE(YYYY/MM/DD)

P. DENIS 2017/06/30ENGINEERING APPROVED

K. PFLUEGERCHANGE RESPONSIBILITY ECO No

ECO-132459TUALATINCLASS CODE

1

ENG/MFG REFERENCE

ELECTRONIC ASSEMBLY

154M2-105-1

DRAWING IN ACCORDANCE WITH

ASME Y14.100 - 2013ASME Y14.1M - 2012[ASME Y14.1 - 2012]ASME Y14.5 - 2009

MATERIAL:

FINISH:

RELATED DOCUMENT:CPCD - TRANSPORTATIONTUALATIN, OR

XX.X

10.5

IN ACCORDANCE WITH CRP-SS-01-01-03 SUPPLIER

MANUAL

2017/06/30

Page: 3 of 4

ADDR_2ADDR_0GND_POWERADDR_1PWR_REF

V_BATT.CAN_HICAN_LOCAN_SHIELDIGN_HIGHIGN_LO

1

J1

23456714 13 12 11 10 9 8

J2

1234510 9 8 7 6

J3 J4

105 4 2

679 83 1

10 9 8 7 6

5 4 3 2 1

POWER STUD L2

POWER STUD L1

NOTES (UNLESS OTHERWISE SPECIFIED):

ASSEMBLY TO INCLUDE FUSES (SEE TABLE).1.

ASSEMBLY TO INCLUDE FUSE PULLER.2.

COVER TO INCLUDE MARKING INTERIOR.3.

SYSTEM VOLTAGE: 12V4.

MODULE SOURCE ADDRESS: 160d (DEFAULT).5.

30A10A10A15A15A5A10A10A5A10A20A15A10A5A30A10A

F27 F25

10A

F23 F21 F19 F12 F16 F10 F7 F5 F1

R1R2R5R7R9R11R13

R14 R12 R10 R8 R6 R4 R3

10A 5A 30A 10A 30A 10A 15A 15A 15A 10A 15A

F28 F26 F24 F22 F20 F18 F17 F14 F13 F15 F11 F9 F8 F4 F6 F3 F2

SPARE FUSESPOSITION DEVICE RATINGSPARE 1 MINI FUSE 5ASPARE 2 MINI FUSE 10ASPARE 3 MINI FUSE 10ASPARE 4 MINI FUSE 15ASAPRE 5 MINI FUSE 15ASPARE 6 MINI FUSE 20ASPARE 7 MINI FUSE 20ASPARE 8 MINI FUSE 30A

D

C

B

A

B

C

D

12345678

8 7 6 5 4 3 2 1

INDICATES CRITICAL CHARACTERISTIC (MUST MEET CPK REQUIREMENTS)

CAPSULE AROUND DIMENSION INDICATES INCOMING INSPECTION REQUIRED

SCALETHIRD ANGLE PROJECTION

4 OF 42:3REV 7/14 - Size B

UNLESS OTHERWISE SPECIFIED DIMENSIONS

ARE IN MILLIMETERS

EATON CORPORATION - CONFIDENTIAL AND PROPRIETARYNOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION

THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE

EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME, BY TAKING POSSESSION OF THIS DOCUMENT. THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS

DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE

CASE OF CONFLICTING CONTRACTUAL PROVISIONS. THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.©2017 Eaton Corporation, All Rights Reserved.

XX.XX.XX

30.50.13

SHEET

REVISION

BSIZE

BDRAWING NUMBER154M2-105-1-SALES

TITLE

mRFRM Schematic

A

DRAFTER/DESIGNER DATE(YYYY/MM/DD)

P. DENIS 2017/06/30ENGINEERING APPROVED

K. PFLUEGERCHANGE RESPONSIBILITY ECO No

ECO-132459TUALATINCLASS CODE

3

ENG/MFG REFERENCEDRAWING IN ACCORDANCE WITH

ASME Y14.100 - 2013ASME Y14.1M - 2012[ASME Y14.1 - 2012]ASME Y14.5 - 2009

MATERIAL:

FINISH:

RELATED DOCUMENT:CPCD - TRANSPORTATIONTUALATIN, OR

XX.X

10.5

IN ACCORDANCE WITH CRP-SS-01-01-03 SUPPLIER

MANUAL

CAGE CODE NO.

N/A

DATE(YYYY/MM/DD)

2017/06/30

154M2-105-1

ELECTRONIC ASSEMBLY

Page: 4 of 4