NOTES: MATERIAL: 1. HOUSING:UL94 V-0 PBT THERMOPLASTIC • BUS BARS: TIN PLATED COPPER • INPUT STUDS: NICKEL PLATED BRASS • INGRESS PROTECTION RATING: IP66 WHEN USED WITH COVER, 2. SEAL, AND SEALING CONNECTORS. VENTED WITH GAS PERMEABLE, WATER-TIGHT VENT TO 3. NORMALIZE INTERNAL PRESSURE RATING: MAX 200 AMPS TOTAL (MAX 100 AMPS PER INPUT STUD) 4. CONNECTIONS: FOR USE WITH DELPHI APEX CONNECTION SYSTEMS 5. MATING CONNECTOR PART NUMBERS: J1: DELPHI 55251400 • J2: DELPHI 54201012 • J3: DELPHI 54201009 • J4: DELPHI 54201010 • PDM CAPABLE OF CONTROLLING 14 RELAYS WITH SERIES FUSES, PLUS 6. 14 INDEPENDANT FUSES THREADED MOUNTING INSERT TIGHTENING TORQUE 24 IN-LBF MAX 7. INPUT STUD TIGHTENING TORQUE 70 IN-LBF MAX 8. 154M2-105-1 CUSTOMER NUMBER BASE MOUNTING THREADS 2 - M5 X 0.8 VERSION REVISIONS REV. DESCRIPTION ECO NO DATE ECO BY A PRODUCTION RELEASE ECO-123716 2017/06/30 PD B CHANGED F27 FROM 5A TO 10A. ECO-132459 2017/12/20 A.L D C B A B C D 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 INDICATES CRITICAL CHARACTERISTIC (MUST MEET CPK REQUIREMENTS) CAPSULE AROUND DIMENSION INDICATES INCOMING INSPECTION REQUIRED SCALE THIRD ANGLE PROJECTION 1 OF 4 1:2 REV 7/14 - Size B UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME, BY TAKING POSSESSION OF THIS DOCUMENT. THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE CASE OF CONFLICTING CONTRACTUAL PROVISIONS. THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT. ©2017 Eaton Corporation, All Rights Reserved. X X.X X.XX 3 0.5 0.13 SHEET REVISION B SIZE B DRAWING NUMBER 154M2-105-1-SALES TITLE mRFRM,GENERIC,METRIC,W/COVER SALES A DRAFTER/DESIGNER DATE(YYYY/MM/DD) P. DENIS 2017/06/30 ENGINEERING APPROVED K. PFLUEGER CHANGE RESPONSIBILITY ECO No ECO-132459 TUALATIN CLASS CODE 1 ENG/MFG REFERENCE ELECTRONIC ASSEMBLY 154M2-105-1 DRAWING IN ACCORDANCE WITH ASME Y14.100 - 2013 ASME Y14.1M - 2012 [ASME Y14.1 - 2012] ASME Y14.5 - 2009 MATERIAL: FINISH: RELATED DOCUMENT: CPCD - TRANSPORTATION TUALATIN, OR X X.X 1 0.5 IN ACCORDANCE WITH CRP-SS-01-01-03 SUPPLIER MANUAL 2017/06/30 Page: 1 of 4
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
NOTES:
MATERIAL:1.
HOUSING:UL94 V-0 PBT THERMOPLASTIC•
BUS BARS: TIN PLATED COPPER•
INPUT STUDS: NICKEL PLATED BRASS•
INGRESS PROTECTION RATING: IP66 WHEN USED WITH COVER,2.SEAL, AND SEALING CONNECTORS.
VENTED WITH GAS PERMEABLE, WATER-TIGHT VENT TO3.NORMALIZE INTERNAL PRESSURE
RATING: MAX 200 AMPS TOTAL (MAX 100 AMPS PER INPUT STUD)4.
CONNECTIONS: FOR USE WITH DELPHI APEX CONNECTION SYSTEMS5.MATING CONNECTOR PART NUMBERS:
J1: DELPHI 55251400•
J2: DELPHI 54201012•
J3: DELPHI 54201009•
J4: DELPHI 54201010•
PDM CAPABLE OF CONTROLLING 14 RELAYS WITH SERIES FUSES, PLUS6.14 INDEPENDANT FUSES
THREADED MOUNTING INSERT TIGHTENING TORQUE 24 IN-LBF MAX7.
INPUT STUD TIGHTENING TORQUE 70 IN-LBF MAX8.
154M2-105-1
CUSTOMER NUMBER
BASE MOUNTING THREADS2 - M5 X 0.8
VERSION
REVISIONSREV. DESCRIPTION ECO NO DATE ECO BY
A PRODUCTION RELEASE ECO-123716 2017/06/30 PDB CHANGED F27 FROM 5A TO 10A. ECO-132459 2017/12/20 A.L
D
C
B
A
B
C
D
12345678
8 7 6 5 4 3 2 1
INDICATES CRITICAL CHARACTERISTIC (MUST MEET CPK REQUIREMENTS)
CAPSULE AROUND DIMENSION INDICATES INCOMING INSPECTION REQUIRED
SCALETHIRD ANGLE PROJECTION
1 OF 41:2REV 7/14 - Size B
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS
EATON CORPORATION - CONFIDENTIAL AND PROPRIETARYNOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION
THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE
EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME, BY TAKING POSSESSION OF THIS DOCUMENT. THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS
DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE
CASE OF CONFLICTING CONTRACTUAL PROVISIONS. THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.©2017 Eaton Corporation, All Rights Reserved.
XX.XX.XX
30.50.13
SHEET
REVISION
BSIZE
BDRAWING NUMBER 154M2-105-1-SALES
TITLE mRFRM,GENERIC,METRIC,W/COVER SALES
A
DRAFTER/DESIGNER DATE(YYYY/MM/DD)
P. DENIS 2017/06/30ENGINEERING APPROVED
K. PFLUEGERCHANGE RESPONSIBILITY ECO No
ECO-132459TUALATINCLASS CODE
1
ENG/MFG REFERENCE
ELECTRONIC ASSEMBLY
154M2-105-1
DRAWING IN ACCORDANCE WITH
ASME Y14.100 - 2013ASME Y14.1M - 2012[ASME Y14.1 - 2012]ASME Y14.5 - 2009
MATERIAL:
FINISH:
RELATED DOCUMENT:CPCD - TRANSPORTATIONTUALATIN, OR
XX.X
10.5
IN ACCORDANCE WITH CRP-SS-01-01-03 SUPPLIER
MANUAL
2017/06/30
Page: 1 of 4
108
43
65
197
2X INPUT STUDSM8 X 1.25
70
216
235
124
4X THREADED MOUNTING INSERTS
M5 X 0.8
94
216
199
215
96
11 TYP
4X 5.6
70
4X R10
R1.00
MOUNTING CUT OUT DIMENSIONS
mRFRM DESIGNED TO BE MOUNTED FROM REAR OF PANEL
28
SHOWN WITH NO COVEROR COMPONENTS
D
C
B
A
B
C
D
12345678
8 7 6 5 4 3 2 1
INDICATES CRITICAL CHARACTERISTIC (MUST MEET CPK REQUIREMENTS)
CAPSULE AROUND DIMENSION INDICATES INCOMING INSPECTION REQUIRED
SCALETHIRD ANGLE PROJECTION
2 OF 41:2REV 7/14 - Size B
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS
EATON CORPORATION - CONFIDENTIAL AND PROPRIETARYNOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION
THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE
EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME, BY TAKING POSSESSION OF THIS DOCUMENT. THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS
DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE
CASE OF CONFLICTING CONTRACTUAL PROVISIONS. THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.©2017 Eaton Corporation, All Rights Reserved.
XX.XX.XX
30.50.13
SHEET
REVISION
BSIZE
BDRAWING NUMBER 154M2-105-1-SALES
TITLE mRFRM,GENERIC,METRIC,W/COVER SALES
A
DRAFTER/DESIGNER DATE(YYYY/MM/DD)
P. DENIS 2017/06/30ENGINEERING APPROVED
K. PFLUEGERCHANGE RESPONSIBILITY ECO No
ECO-132459TUALATINCLASS CODE
1
ENG/MFG REFERENCE
ELECTRONIC ASSEMBLY
154M2-105-1
DRAWING IN ACCORDANCE WITH
ASME Y14.100 - 2013ASME Y14.1M - 2012[ASME Y14.1 - 2012]ASME Y14.5 - 2009
MATERIAL:
FINISH:
RELATED DOCUMENT:CPCD - TRANSPORTATIONTUALATIN, OR
XX.X
10.5
IN ACCORDANCE WITH CRP-SS-01-01-03 SUPPLIER
MANUAL
2017/06/30
Page: 2 of 4
TOP VIEWCOVER AND COMPONENTS REMOVED BOTTOM VIEW
SHOWING CONNECTOR LOCATIONS
INPUT STUDS
J1
J2
J3
J4
D
C
B
A
B
C
D
12345678
8 7 6 5 4 3 2 1
INDICATES CRITICAL CHARACTERISTIC (MUST MEET CPK REQUIREMENTS)
CAPSULE AROUND DIMENSION INDICATES INCOMING INSPECTION REQUIRED
SCALETHIRD ANGLE PROJECTION
3 OF 41:2REV 7/14 - Size B
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS
EATON CORPORATION - CONFIDENTIAL AND PROPRIETARYNOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION
THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE
EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME, BY TAKING POSSESSION OF THIS DOCUMENT. THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS
DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE
CASE OF CONFLICTING CONTRACTUAL PROVISIONS. THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.©2017 Eaton Corporation, All Rights Reserved.
XX.XX.XX
30.50.13
SHEET
REVISION
BSIZE
BDRAWING NUMBER 154M2-105-1-SALES
TITLE mRFRM,GENERIC,METRIC,W/COVER SALES
A
DRAFTER/DESIGNER DATE(YYYY/MM/DD)
P. DENIS 2017/06/30ENGINEERING APPROVED
K. PFLUEGERCHANGE RESPONSIBILITY ECO No
ECO-132459TUALATINCLASS CODE
1
ENG/MFG REFERENCE
ELECTRONIC ASSEMBLY
154M2-105-1
DRAWING IN ACCORDANCE WITH
ASME Y14.100 - 2013ASME Y14.1M - 2012[ASME Y14.1 - 2012]ASME Y14.5 - 2009
MATERIAL:
FINISH:
RELATED DOCUMENT:CPCD - TRANSPORTATIONTUALATIN, OR
XX.X
10.5
IN ACCORDANCE WITH CRP-SS-01-01-03 SUPPLIER
MANUAL
2017/06/30
Page: 3 of 4
ADDR_2ADDR_0GND_POWERADDR_1PWR_REF
V_BATT.CAN_HICAN_LOCAN_SHIELDIGN_HIGHIGN_LO
1
J1
23456714 13 12 11 10 9 8
J2
1234510 9 8 7 6
J3 J4
105 4 2
679 83 1
10 9 8 7 6
5 4 3 2 1
POWER STUD L2
POWER STUD L1
NOTES (UNLESS OTHERWISE SPECIFIED):
ASSEMBLY TO INCLUDE FUSES (SEE TABLE).1.
ASSEMBLY TO INCLUDE FUSE PULLER.2.
COVER TO INCLUDE MARKING INTERIOR.3.
SYSTEM VOLTAGE: 12V4.
MODULE SOURCE ADDRESS: 160d (DEFAULT).5.
30A10A10A15A15A5A10A10A5A10A20A15A10A5A30A10A
F27 F25
10A
F23 F21 F19 F12 F16 F10 F7 F5 F1
R1R2R5R7R9R11R13
R14 R12 R10 R8 R6 R4 R3
10A 5A 30A 10A 30A 10A 15A 15A 15A 10A 15A
F28 F26 F24 F22 F20 F18 F17 F14 F13 F15 F11 F9 F8 F4 F6 F3 F2
SPARE FUSESPOSITION DEVICE RATINGSPARE 1 MINI FUSE 5ASPARE 2 MINI FUSE 10ASPARE 3 MINI FUSE 10ASPARE 4 MINI FUSE 15ASAPRE 5 MINI FUSE 15ASPARE 6 MINI FUSE 20ASPARE 7 MINI FUSE 20ASPARE 8 MINI FUSE 30A
D
C
B
A
B
C
D
12345678
8 7 6 5 4 3 2 1
INDICATES CRITICAL CHARACTERISTIC (MUST MEET CPK REQUIREMENTS)
CAPSULE AROUND DIMENSION INDICATES INCOMING INSPECTION REQUIRED
SCALETHIRD ANGLE PROJECTION
4 OF 42:3REV 7/14 - Size B
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS
EATON CORPORATION - CONFIDENTIAL AND PROPRIETARYNOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION
THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE
EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME, BY TAKING POSSESSION OF THIS DOCUMENT. THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS
DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE
CASE OF CONFLICTING CONTRACTUAL PROVISIONS. THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.©2017 Eaton Corporation, All Rights Reserved.
XX.XX.XX
30.50.13
SHEET
REVISION
BSIZE
BDRAWING NUMBER154M2-105-1-SALES
TITLE
mRFRM Schematic
A
DRAFTER/DESIGNER DATE(YYYY/MM/DD)
P. DENIS 2017/06/30ENGINEERING APPROVED
K. PFLUEGERCHANGE RESPONSIBILITY ECO No
ECO-132459TUALATINCLASS CODE
3
ENG/MFG REFERENCEDRAWING IN ACCORDANCE WITH
ASME Y14.100 - 2013ASME Y14.1M - 2012[ASME Y14.1 - 2012]ASME Y14.5 - 2009
MATERIAL:
FINISH:
RELATED DOCUMENT:CPCD - TRANSPORTATIONTUALATIN, OR
XX.X
10.5
IN ACCORDANCE WITH CRP-SS-01-01-03 SUPPLIER
MANUAL
CAGE CODE NO.
N/A
DATE(YYYY/MM/DD)
2017/06/30
154M2-105-1
ELECTRONIC ASSEMBLY
Page: 4 of 4
Related Documents
