1/24 By: Abu Bakkar Marwat 05-NTU-05 Section A Semester VI NTU Faisalabad 0313-6660505 [email protected] Textile Testing-II (TS-333) 2/24 Table of contents: Introduction…

Dyeing And Printing Defects Analysis Submitted by:Yash Vyas A.P-V Classification Of Defects Minor Defect A defect is defined as minor defect that is not likely to reduce…

1. Abubakkar Marwat (05-NTU-05)Yarn Evenness1/19Table of contents: Introduction Types of irregularity Causes of irregularity Denoting unevenness or irregularity Types of…

Slide 1 Presented by- Harshita Agarwal (10) Reetusri (22) FABRIC AND GARMENT FINISHING Presentation on â Decatising, Emerising, Raising and Sanforizing. CONTENTS INTRODUCTION…

âDyeing Faultsâ Abstract Wet processing methods are included with dyeing, printing and finishing process. A grey end product is not desired to anyone who likes to use an…

DYEING AND POLYESTER AND COTTON BLENDS DYEING OF POLYESTER AND COTTON BLEND ss SUBMITTED TO: DR. M.L.GULRAJANI SUBMITTED BY: ASHISH DUA (2012TTF2406) IIT DELHI [email protected]…

1.Submitted by :2. The faults which are visible after dyeing are called Dyeing faults . These faults descries the quality of the fabrics . So to overcome from this faults…

UNIVERSITI TEKNOLOGI MARA COLORANT FROM MELASTOMA MALABATHRICUML. PLANT MOHD AZLIN BIN MOHD NOR Thesis submitted in fulfilment of the requirements for the degree of Master…