The UCLA Rocket Project 1 The Development of a Paraffin Based Experimental Hybrid Sounding Rocket Kurt U. Zimmerman 1 , Brian C. Kentosh 2 , Peter C. Chang 3 , Mackenzie…

Engineering, 2011, 3, 144-155 doi:10.4236/eng.2011.32017 Published Online February 2011 (http://www.scirp.org/journal/eng) Copyright © 2011 SciRes. ENG Taguchi Optimization…

Engineering 202 Laboratory Manual StAtics And Strength of MAteriAls (Read before attending lab.) Fall 2002 , Spring 2003 This manual has evolved over the years. Contributors…

Mechanics of Materials Laboratory Cantilever Flexure Test David Clark Group C: 9/15/2006 Abstract A cantilever beam, a beam supported at one point, has been used many times…

Mechanics of Materials Laboratory Lab #4 Modulus of Elasticity Flexure Test David Clark Group C 9/8/2006 Abstract Since all materials experience some type of deformation…

18 Machining and Machinability of Aluminum Alloys École de technologie supérieure (ÉTS), Department of Mechanical Engineering, 1100 Notre-Dame Street West, Montreal Quebec…

Baja SAE 2011 Report

USAFA TR 2006-10 ASTM E647 FCG Testing Standard Round Robin Fatigue Crack Growth Testing Results Final Report Jason Avram Center for Aircraft Structural Life Extension (CAStLE)…

Hindawi Publishing Corporation International Journal of Corrosion Volume 2012, Article ID 380217, 15 pages doi:10.1155/2012/380217 Review Article Green Inhibitors for Corrosion…

Aluminum Alloy Castings: Properties, Processes, and Applications J.G. Kaufman and E.L. Rooy, p 193-209 DOI:10.1361/aac2004p193 Copyright © 2004 ASM International® All rights…