Lecture 3 Monday, 11 March 2013 1 ENGINEERING GRAPHICS 1E9 Lecture 3: Isometric Projections Lecture 3 Monday, 11 March 2013 2 What is ISOMETRIC? • It is a method of producing…

Auxiliary Views Objective To understand how to generate views that show inclined and oblique surfaces in true shape in multiview drawings To better understand the manipulation…

Figure 6-1 Projection of an Object. © 2003, Prentice-Hall, Inc. Giesecke Technical Drawing, 12e Figure 6-2 Top and Right-Side Views. © 2003, Prentice-Hall, Inc. Giesecke…

Slide 1AXONOMETRIC PROJECTION C H A P T E R F I F T E E N Slide 2 Technical Drawing with Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman…

3-D Solid Part Models and Multiview Documentation from Technical Sketches The technical sketches in Figures 10.160 through 10.168 are designed to be used to construct fully…

agokaki 腮欠 Lit. chin gap. One of many types of cogging joints. The joint is used to attach a horizontal timber to the face of a square post or pillar. Cuts are made on…

1. Lecture 3 Sunday 26 July 2015 1 ENGINEERING GRAPHICS 1E9 Lecture 3: Isometric Projections 2. Lecture 3 Sunday 26 July 2015 2 What is ISOMETRIC? • It is a method of producing…

Slide 1 TECH 104 – Technical Graphics Communication Week 4: Multiview Drawings - 2 Slide 2 TECH 104 – Technical Graphics Communication Week 4: Multiview Drawings 2 Here’s…

Slide 1 Auxiliary Views Engineering Graphics Stephen W. Crown Ph.D. Slide 2 Objective  To understand how to generate views that show inclined and oblique surfaces in true…

Slide 1 Multiview Projection Slide 2 Basics of Projections  Orthographic drawings are the result of projecting the image of a three-dimensional object onto one of six…