DOCUMENT RESOURCES FOR EVERYONE
Documents tagged
Documents OISD-STD-137

OISD - 137 FOR RESTRICTED CIRCULATION No. INSPECTION OF ELECTRICAL EQUIPMENT OISD STANDARD - 137 First Edition, January 1990 Reaffirmed, August, 1999 Oil Industry Safety…

Design UNL Climate Change Presentation

1. Keeping “Green” BuildingsFrom Turning “Brown” Marcel Harmon, Ph.D., P.E., LEED-AP 2. M.E. Group, Inc. Building Systems Design Division  Mechanical/Electrical/Plumbing/Lighting…

Documents Std-116

OISD STANDARD - 116 Second Edition, August 2007 FOR RESTRICTED CIRCULATION ONLY FIRE PROTECTION FACILITIES FOR PETROLEUM REFINERIES & OIL/GAS PROCESSING PLANTS OISD –…

Documents indian railway permanant way manual

GOVERNMENT OF INDIA MINISTRY OF RAILWAYS (RAILWAY BOARD) INDIAN RAILWAYS PERMANENT WAY MANUAL Second Reprint 2004 Embodying all advance correction slips upto number 93 dated…

Documents OISD-STD-230

DRAFT-III OISD-STD-230 First Edition FOR RESTRICTED CIRCULATION UNLINED UNDERGROUND ROCK CAVERN STORAGE FOR PETROLEUM AND LIQUID PETROLEUM GAS Prepared By FUNCTIONAL COMMITTEE…

Documents Manual Hartzell

HARTZELL PROPELLER INC. One Propeller Place Piqua, Ohio 45356-2634 U.S.A. Telephone: 937.778.4200 Fax: 937.778.4391 MANUAL REVISION TRANSMITTAL Manual 149 (61-00-49) Propeller…

Documents APU

HONEYWELL This is an unpublished work protected under the copyright laws of the United States and other countries. Should publication occur, then the following notice shall…

Documents mod 07 tons of mcq

JAR 66 Module 7 Exam Practice Exam Module 7 Maintenance Practices This is exam number 1. 1. Where would you disconnect a chain? a) At a bolted joint b) At a spring clip joint…

Documents July 2011 Issue

BETTER MOUSETRAPS: FLOWMETERS WITH DATA DELIVERY PAGE 34 SAFETY: “SEWER SLIDE” PROVIDES POWERFUL LESSONS PAGE 10 TECHNOLOGY: THE BENEFITS OF DIRECTIONAL DRILLING PAGE…

Documents Maintenance of Gas Turbine 5465656

Maintenance of gas turbine : u pkeep o proper y Maintenance, defined as the ³upkeep off propertty ,´ is one of the most important operations in a plant. The manufacture…