DOCUMENT RESOURCES FOR EVERYONE
Engineering Optimisation of machining parameters for slot milling operation in Inconel 625 alloy by using...

1 VIKRAM SARABHAI SPACE CENTRE (VSSC) PROFILE VSSC is the lead centre for development of satellite launch vehicles and associated technologies. The centre pursues active…

Documents IJIEC_2014_38

* Corresponding author. E-mail: [email protected] (G. K. Bose) © 2014 Growing Science Ltd. All rights reserved. doi: 10.5267/j.ijiec.2014.10.005 International Journal of…

Documents DUPLEX STEEL.pdf

See discussions, stats, and author profiles for this publication at: http://www.researchgate.net/publication/281064241 Experimental Investigation and Multi Objective Optimization…

Documents Optimization of Surface Roughness Material Removal Rate and Cutting Tool Flank Wear in Turning Using...

OPTIMIZATION OF SURFACE ROUGHNESS, MATERIAL REMOVAL RATE AND CUTTING TOOL FLANK WEAR IN TURNING USING EXTENDED TAGUCHI APPROACH A thesis submitted in partial fulfillment…

Documents Agricultural Residue Feedstock Selection for Polyhydroxyalkanoates Production using AHP-GRA

*Corresponding author: [email protected] Agricultural Residue Feedstock Selection for Polyhydroxyalkanoates Production using AHP-GRA Philippine Journal of Science 147 (4):

Documents A numerical study on chloride diffusion in freeze-thaw affected concrete

Existing concrete in cold or coastal regions is attacked by chloride penetration under freeze-thaw cycles