7/28/2019 Tool Storage - Herramientas
1/18
ToolStorage
TOOLSTORAGE
G
7/28/2019 Tool Storage - Herramientas
2/18
TOOLS
TORAGE
TOOL STORAGE Heavy Duty Braces: Continuous piano hinge and lid braces
increase the strength of the lid, and provide easy opening and
closing action.
Full Length Drawer Pulls: Easy one-handed operation when
opening or closing drawers.
Reinforced Steel Channels: Heavy duty reinforced steel
channels support heavy weight load capacities.
Ball Bearing Drawer Slides: One piece heavy duty ball
bearing drawer slides offer full drawer extension for total drawer
access and smooth operation of fully loaded drawers.
Chrome Plated End Handle: Chrome plated end handle
mounts on either end of the roller cabinet to allow
maximum control when moving.
Double Wall Construction: Offers maximum chassis
strength and assures smooth, easy operation and alignment
of fully loaded drawers.
High Performance Casters: Allow smooth and reliable
mobility. Swivel casters have locking system.
7/28/2019 Tool Storage - Herramientas
3/18
TOOL
STORAGE
FEATURES
27
CONSTRUCTION Double wall construction provides structural strength
and assures smooth, easy operation and alignment of
fully loaded drawers.
Lids remain securely open until chest storage is in the closed
locked position. Heavy gauge, continuous piano hinge equipped with rust-
resistant stainless steel pin prevents punch-out and lid
removal while still allowing easy opening and closing action.
Locking lid stay provides support in open position, preventing
the lid from falling when locked in position on standard units.
Heavy duty gas struts featured on some models for assistance
and safety.
DRAWERS Heavy gauge steel is used in a two-piece construction which
adds load carrying strength and resists sagging. Built-in rear
stiffener strengthens drawer.
All drawers open to 100% full extension providing complete
front-to-back access of the drawer and its contents.
Full width drawer pulls provide simple, one-handed operation
when opening or closing drawers.
Commercial series utilizes ball-bearing slides with quick
disconnects featured on all drawers allowing additional
strength and carrying capacity for easy drawer movement.
Utility duty series utilizes welded slides to the drawer sides
and operates on the two-piece, I-beam drawer slides with
beveled channel edges providing smooth drawer movement.
This I-beam slide is stronger than a one-piece slide, which may
split under heavy loads.
EXTERIOR OF DRAWERS Pre-painted toolboxes are coated with iron phosphate that
provides better paint adhesion and corrosion protection.
Durable, baked-on polyester powder coat paint provides a top
quality fade-resistant finish.
CASTERS Swivel and rigid casters provide easy rolling mobility and
resistance to damaging effects of oil and solvents.
Swivel casters contain side-lock brakes.
Heavy duty large 6"x 2" casters are made of high
thermoplastic rubber. Roller bearings provide easy rolling
mobility and are resistant to gas, oil, and solvents.
7/28/2019 Tool Storage - Herramientas
4/18
TOOLSTORAGE
28
53" Professional Series Tool CabinetsDesigned for industrial useProduct Code Description
W53TC8 53" Wide x 20" Deep 8-Drawer Top ChestW53RC13 53" Wide x 20 Deep 13-Drawer Roll Cabinet
W53TC8 Top Chest Overall DimensionsCapacity(cu. in.) Width (inc hes) Depth (inches) Height (inc hes)
12970 53 1332 19 1316 19 716
Top Chest Drawer SizesNumber Width (inches) Depth (inches) Height (inches)
Top Compartment 52 516 18 732 4 23322 11 732 17 12 1 582 11 732 17 12 3 582 34 2332 17 12 1 582 34 2332 17 12 3 58
W53RC13 Roll Cabinet Overall DimensionsCapacity(cu. in.) Width (inc hes) Depth (inches) Height (inches)
20340 53 1332 19 1316 38 18
Roll Cabinet Drawer SizesNumber Width Depth Height
2 11 732 17 12 1 23323 11 732 17 12 3 23321 11 732 17 12 11 23322 34 2332 17 12 1 584 34 2332 17 12 3 581 34 2332 17 12 7 58
FeaturesMade of High-Quality Class I steel to enhance strength a nd finish.Double wall construction provides strength.
Reinforcement corner gussets add strength and reduce racking.
2" mounting centers provide flexibility in arranging drawers toindividual needs
Drawers equipped with positive latching drawer retention to prevent
unwanted drawer opening.All dra wers equippe d with 75 poun d full ex tensio n ball b earing slides with
quick disconnect.All 4" a nd dee per dra wers p rovide for add ing addi tional slides to doub le
drawer capacity.
Rolled hem on all draw ers provide superior strength, rigidity and s afety.Casters absorb vibrations transmitted to frame w hile moving on
uneven surfaces.
Casters equipped with pedal brake and ball bearings for easy operation.High luster paint protects against scratches, pealing, blistering
and corrosion.
Paint pretreatment process both sprays and immerses boxes for addedcorrosion protected.
Drawer liners included at no extra charge.
Gas struts in lid of chest make lid easy to open and close.Two point locking design adds e xtra securit y on all chests.
W53RC13
W53TC8
7/28/2019 Tool Storage - Herramientas
5/18
TOOL
STORAGE
53"
PROFESSIONAL
SERIES
29
Designed for industrial use
Product Code Description
W53RC6BS 53" Wide x 20" Deep 6-Drawer Roll Cabinet
with Bulk Storage
W53RC6BS Roll Cabinet Overall DimensionsCapacity(cu. in .) Wid th ( inches) Depth (i nches) Height ( inches)
23972 53 1332 19 1316 38 18
Roll Cabinet Drawer SizesNumber Wid th ( inches) Depth (i nches) Height ( inches)
5 34 1332 17 12 3 581 34 2332 17 12 7 58Bulk Section 16 19 29
FeaturesWide drawers to hold long tools such as pry bars and extensions.Bulk section with adjustable shelf perfect for storing large, bulky tools.
Made of High-Quality Class I steel to enhance strength a nd finish.
Double wall construction provides strength.
Reinforcement corner gussets add strength and reduce racking.2" mounting centers provide flexibility in arranging drawers to
individual needs.Drawers equipped with positive latching drawer retention to prevent
unwanted drawer opening.All dra wers equippe d with 75 poun d full ex tensio n ball b earing slides
with quick disconnect.
All 4" a nd dee per dra wers p rovide for add ing addi tional slides to doub ledrawer capacity.
Rolled hem on all draw ers provide superior strength, rigidity and s afety.
Casters absorb vibrations transmitted to frame w hile moving onuneven surfaces.
Casters equipped with pedal brake and ball bearings for easy operation.
High luster paint protects against scratches, pealing, blisteringand corrosion.
Paint pretreatment process both sprays and immerses boxes for added
corrosion protected.Drawer liners included at no extra charge.
W53RC6BS
Bulk Storage Area
53" Professional Series Tool Cabinet
7/28/2019 Tool Storage - Herramientas
6/18
TOOLSTORAGE
30
40" Professional Series Tool CabinetsDesigned for industrial useProduct Code Description
W40TC4 40" Wide x 20" Deep 4-Drawer Top ChestW40RC7 40" Wide x 20" Deep 7-Drawer Roll Cabinet
W40TC4 Top Chest Overall DimensionsCapacity(c u. in.) Width (inches) Depth (inches) Height (inches)
9746 40 132 19 1316 19 716
Top Chest Drawer SizesNumber Width Depth Height
Top Compartment 39 2932 18 2332 4 23322 34 1116 17 1732 1 13322 34 1116 17 1732 3 1932
W40RC7 Roll Cabinet Overall DimensionsCapacity(c u. in.) Width (inches) Depth (inches) Height (inches)
15253 40 19 1316 37 78
Roll Cabinet Drawer Sizes
Number Width Depth Height2 34 1116 17 1732 1 13324 34 1116 17 1732 3 19321 34 1116 17 1732 7 2132
FeaturesMade of High-Quality Class I steel to enhance strength and finish.
Double wall construction provides strength.Reinforcement corner gussets add strength and reduce racking.
2" mounting centers provide flexibility in arranging drawers to
individual needs.Drawers equipped with positive latching drawer retention to prevent
unwanted drawer opening.
All draw ers eq uipped w ith 75 pound fu ll exten sion ba ll bear ing slid es wi thquick disconnect.
All 4" a nd deep er draw ers pro vide fo r adding additi onal sl ides to double
drawer capacity.Rolled hem on all drawers provide superior strength, rigidity and safety.
Casters absorb vibrations transmitted to frame while mov ing on
uneven surfaces.Casters equipped with pedal brake and ball bearings for easy operation.
High luster paint protects against scratches, pealing, blisteringand corrosion.
Paint pretreatment process both sprays and immerses boxes for added
corrosion protected.Drawer liners included at no extra charge.
Gas struts in lid of chest make lid easy to open and close.
Two point locking design adds ex tra se curity on all c hests .
W40RC7
W40TC4
7/28/2019 Tool Storage - Herramientas
7/18
TOOL
STORAGE
40" & 26"
PROFESSIONAL
SERIES
31
W26RC7
W26TC4
26" Professional Series Tool CabinetDesigned for industrial useProduct Code Description
W26TC4 26" Wide x 20" Deep 4-Drawer Top Chest
W26RC7 26" Wide x 20" Deep 7-Drawer Roll Cabinet
W26TC4 Top Chest Overall DimensionsCapacity (cu. in.) Width (inches) Depth (inches) Height (inches)
6180 26 2332 19 1316 19 1332
W26TC4 Roll Cabinet Overall DimensionsCapacity(cu. in .) Wid th ( inches) Depth (i nches) Height ( inches)
9374 26 19 1316 37 78
Top Chest Drawer SizesNumber Width Depth Height
Top Compartment 26 1932 18 2332 4 23322 21 38 17 1732 1 13322 21 38 17 1732 3 1932
Roll Cabinet Drawer Sizes
Number Wid th ( inches) Depth (i nches) Height ( inches)2 21 38 17 1132 1 15324 21 38 17 1132 3 19321 21 38 17 1132 7 2132
FeaturesMade of High-Quality Class I steel to enhance strength a nd finish.Double wall construction provides strength.
Reinforcement corner gussets add strength and reduce racking.
2" mounting centers provide flexibility in arranging drawers toindividual needs.
Drawers equipped with positive latching drawer retention to prevent
unwanted drawer opening.All dra wers equippe d with 75 poun d full ex tensio n ball b earing slides with
quick disconnect.
All 4" a nd dee per dra wers p rovide for add ing addi tional slides to doub ledrawer capacity.
Rolled hem on all draw ers provide superior strength, rigidity and s afety.Casters absorb vibrations transmitted to frame w hile moving onuneven surfaces.
Casters equipped with pedal brake and ball bearings for easy operation.
High luster paint protects against scratches, pealing, blistering andcorrosion.
Paint pretreatment process both sprays and immerses boxes for addedcorrosion protected.
Drawer liners included at no extra charge.
Two point locking design adds e xtra securit y on all chests.
7/28/2019 Tool Storage - Herramientas
8/18
TOOLSTORAGE
32
Heavy-Industrial Series 42" Tool CabinetsExtra heavy duty industrial-grade tool cabinets with ballbearing drawer slides for rugged service in the toughestwork environmentsProduct Code Description
50860 42" Wide x 24 " Deep Indus tr ia l 4 -Drawer Top Chest50890 42" Wide x 24 " Deep Indus tr ia l 5 -Drawer Ro ll Cabinet
50860 Top Chest Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
13798 41 12 24 12 22 34
Top Chest Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
2 38 22 21 38 22 4 141 38 22 6 716
50890 Roll Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
21051 41 12 24 12 42 18
Roll Cabinet Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
3 38 22 4 141 38 22 6 7161 38 22 8 12
FeaturesFrame is reinforced using 14 gauge plates on the front of cabinet.Rigidity of frame is significantly increased with full height & width triple channel wall.
Three l ayers of meta l guard the co rners w ith interlock corner design .TWO p airs of 120 lb. r ated ba ll bear ing dra wer sl ides on all dra wers except2" drawers.
6"x2" precision ball bearing casters m ade of high tech thermoplastic rubber.
Casters absorb vibrations transmitted to frame while mov ing on uneven surfaces.Casters equipped with pedal brake and ball bearings for easy operation.
All draw ers eq uipped w ith safe -lock syste m & m ade of 1 8 gauge heavy duty s teel.Extruded aluminum drawer handle trim.
Red high gloss powder coat paint is scratch resistant.
Drawer liners included at no extra charge.Gas struts in lid of chest make lid easy to open and close.
50890
50860
7/28/2019 Tool Storage - Herramientas
9/18
TOOL
STORAGE
HEAVY INDUSTRIAL
& COMMERCIAL
SERIES TOP CHESTS& ROLL CABINETS
33
Do not open more than one loaded drawer at a time. Close lid and lock drawers and doors before moving. Apply brakes on locking casters when not moving unit. Do not step in or on drawers. Secure units together with fasteners.
WARNING
Read and follow instruction manual. Do not pull; push to move. Wear gloves when lifting by edges. Keep feet and fingers clear of edges when stacking,
hanging or moving units.
Commercial Series 53" Tool Cabinets
Designed for use in commercial applications.Equipped with quadra level ball bearing drawer slides.Product Code Description
50861 53" 9-Drawer Heavy DutyRo ll er Bear ing Top Chest50891 53" 14 -Drawer Heavy Duty Ro ll erBear ing Rol l Cab inet
Color Options: Standard color is red. To order in an optional color, simply add the appropriatecolor code to the end of the product code. Example: To order #50861 in Blue, specify product
code 50861BL
50861 Top Chest Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
13542 52 1732 17 78 22 14
Top Chest Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
5 23 16 23 23 16 4 141 23 16 6 716
50891 Roll Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
21000 53 1732 18 34 42 38
Roll Cabinet Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
4 23 16 27 23 16 4 142 23 16 67161 23 16 8 12
Features
Frame is reinforced for rigidity using 14 gauge channel on bottom.High gloss powder coat paint is scratch & chemical resistant.
Stronghold drawer detents help keep drawers shut.Heavy gauge metal for a lifetime of use.
Double wall construction for greater strength and durability.
Heavy duty 5" x 2" casters on c abinets.Drawer liners included at no extra charge.
Gas struts in lid for easy and safe opening.
Ball bearing drawer slides for smooth drawer operation.
Color Options
Red: StandardBlack: BBlue: BL
Yellow: Y
50891
50861
7/28/2019 Tool Storage - Herramientas
10/18
TOOLSTORAGE
34
Commercial Series 42" Tool CabinetsDesigned for commercial applications. Equipped withquadra level ball bearing drawer slides.Product Code Descrip tion
50865 42" 7 -Drawer Heavy Duty Ro ll er Bearing Top Chest
50895 42" 15-Drawer Heavy Duty Rol le r Bearing Rol l Cab inet50855 37" 1-Shelf Heavy Duty Tall Side Ca binet
Color Options: Standard color is red. To order in an optional color, simply add the appropriatecolor code to the end of the product code. Example: To order #50865 in Blue, specify product
code 50865BL
50865 Top Chest Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
9205 40 12 17 78 20 12
Top Chest Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
1 38 16 4 142 23 16 22 11 16 21 23 16 4 14
1 11 16 41
4
50895 Roll Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
14623 41 12 18 34 42 38
Roll Cabinet Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
1 38 16 4 144 23 16 22 23 16 4 141 23 16 6 7164 11 16 22 11 16 4 141 11 16 6 716
FeaturesFrame is reinforced for rigidity using 14 gauge channel on bottom.
High gloss powder coat paint is scratch & chem ical resistant.Stronghold drawer detents help keep drawers shut.
Heavy gauge metal for a lifetime of use.
Double wall construction for greater strength and durability.Heavy duty 5" x 2" casters on cabinets.
Gas struts in lid for easy and safe opening.Ball bearing drawer slides for smooth drawer operation.
Drawer liners included at no extra charge.
50855 Side Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
8200 15 18 34 37 116
FeaturesHigh gloss powder coat paint is scratch & chem ical resistant.Heavy gauge metal for a lifetime of use.
Adjusta ble she lf for ve rsatil e tool s torage options .
Can be used on all Williams Commercial Series roll cabinets.
Color Options
Red: Standard
Black: B
Blue: BL
Yellow: Y
Orange: O
50865
50855
50865BL50895BL50855BL
50865B50895B50855B
50865O50895O50855O
50865Y50895Y50855Y
50895
7/28/2019 Tool Storage - Herramientas
11/18
TOOL
STORAGE
COMMERCIAL
SERIES TOOL
CHESTS &
ROLL CABINETS
35
Commercial Series 34" Tool Cabinets
Product Code Description
50867 34" 10-Drawer Heavy Duty Roller Bearing Top Chest50897 34" 8-Drawer Heavy Duty Rol ler Bearing Rol l Cabinet
50867 Top Chest Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
8845 34 17 78 20 12
Top Chest Drawer SizesNumber Width Depth Height
6 11 16 21 7 16 6 7162 31 16 21 31 16 4 14
50897 Roll Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
14292 35 18 34 42 38
Roll Cabinet Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
4 31 16 23 31 16 4 141 31 16 8 12
FeaturesRoll cab frames are reinforced for rigidity using 14 gauge channel on bottom.
High gloss powder coat paint is scratch & chemical resistant.Stronghold drawer detents help keep drawers shut.
Heavy gauge metal for a lifetime of use.Double wall construction for greater strength and durability.Heavy duty 5" x 2" casters on c abinets.
Wide drawers are ideal for storing torque wrenches, prybars, etc.Drawer liners included at no extra charge.
Ball bearing drawer slides for smooth drawer operation.
Do not open more than one loaded drawer at a time. Close lid and lock drawers and doors before moving. Apply brakes on locking casters when not moving unit. Do not step in or on drawers. Secure units together with fasteners.
WARNING
Read and follow instruction manual. Do not pull; push to move. Wear gloves when lifting by edges. Keep feet and fingers clear of edges when stacking,
hanging or moving units.
50896
50867
50897
Commercial Series 42" Tool CabinetsDesigned for commercial applications. Equippedwith quadra level ball bearing drawer slides. Fullwidth drawers.Product Code Description
50896 42" 6-Drawer Heavy Duty Rol ler Bearing Rol l Cabinet
50896 Roll Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
17242 41 12 18 34 42 38
Roll Cabinet Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
2 38 16 6 7164 38 16 4 14
7/28/2019 Tool Storage - Herramientas
12/18
TOOLSTORAGE
36
Do not open more than one loaded drawer at a time. Close lid and lock drawers and doors before moving. Apply brakes on locking casters when not moving unit. Do not step in or on drawers. Secure units together with fasteners.
WARNING
Read and follow instruction manual. Do not pull; push to move. Wear gloves when lifting by edges. Keep feet and fingers clear of edges when stacking,
hanging or moving units.
Commercial Series 27" Tool Cabinets
Designed for commercial applications. Equippedwith quadra level ball bearing drawer slides.Product Code Description
50871 27" 10-Drawer Heavy Duty Rol ler Bearing Top Chest50901 27" 8-Drawer Heavy Duty Roller Bearing Rol l Cabinet
50871 Top Chest Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
6571 26 17 78 20 12
Top Chest Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
1 23 16 4 142 23 16 26 7 16 21 7 16 6 716
50901 Roll Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
10560 27 18 34 42 38
Roll Cabinet Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
1 23 16 8 123 23 16 4 144 23 16 2
FeaturesFrame is reinforced for rigidity using 14 gauge channel on bottom.
High gloss powder coat paint is scratch & chem ical resistant.
Stronghold drawer detents help keep drawers shut.
Heavy gauge metal for a lifetime of use.Double wall construction for greater strength and durability.
Heavy duty 5" x 2" casters on cabinets.Drawer liners included at no extra charge.
Ball bearing drawer slides for smooth drawer operation.
50871
50901
7/28/2019 Tool Storage - Herramientas
13/18
TOOL
STORAGE
COMMERCIAL &UTILITY SERIES
TOP CHESTS &ROLL CABINETS
37
Utility Series 26" Tool CabinetsUtility duty units, equipped with I-Beam frictiondrawer slides for everyday commercial use.
Product Code Descrip tion50805 26" 12-Drawer Top Chest50837 27" 5-Drawer Roll Cabinet
50805 Top Chest Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
6507 26 17 78 20 12
Top Chest Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
1 23 16 4 142 23 16 29 7 16 2
50837 Roll Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
13364 27 1834 42 38
Roll Cabinet Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
1 23 16 24 23 16 4 14
FeaturesHeavy bottom support rails.
High gloss powder coat paint is scratch & chemical resistant.
Heavy gauge metal for a lifetime of use.Double wall construction for greater strength.
Heavy duty 5" x 2" casters on 42" c abinet & 5" x 1-1/4" on 26" cabinets.
Full width drawer on 42" cabinet has ball bearing slides for smoothdrawer operation.
Standard compound friction slides.
Utility Series 42" Tool CabinetsUtility duty units, equipped with I-Beam frictiondrawer slides for everyday commercial use.Product Code Description
50801 42" 9-Drawer Top Chest50831 42" 15-Drawer Roll Cabinet
Color Options: Standard color is red. To order in an optional color, simply add the appropriate color
code to the end of the product code. Example: To order #50801 in Blue, specify product code 50801BL
50801 Top Chest Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
9205 40 12 17 78 20 12
Top Chest Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
1 38 16 4 144 11 16 24 23 16 2
50831 Roll Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
14623 41 12 18 34 42 38
Roll Cabinet Drawer SizesNumber
Width(inches)
Depth(inches)
Height(inches)
1 38 16 4 144 23 16 22 23 16 4 141 23 16 6 7164 11 16 22 11 16 4 141 11 16 6 716
50801
50831
50805
50837
Color Options
Red: Standard
Black: B
Blue: BL
7/28/2019 Tool Storage - Herramientas
14/18
TOOLSTORAGE
38
Utility Series 26" Tool CabinetsUtility duty units, equipped with I-Beam frictiondrawer slides for everyday commercial use.Product Code Description
50803 26" 10-Drawer Top Chest50833 27" 5-Drawer Roll Cabinet
Color Options: Standard color is red. To order in an optional color, simply add the appropriate color
code to the end of the product code. Example: To order #50803 in Blue, specify productcode 50803BL
50803 Top Chest Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
4000 26 12 18 78
Top Chest Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
1 23 10 12 2122 23 10 12 26 7 10 12 21 7 10 12 6 716
50833 Roll Cabinet Overall DimensionsCapacity
(cu. in.)
Width
(inches)
Depth
(inches)
Height
(inches)8228 27 18 34 35 58
Roll Cabinet Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
4 23 16 4 141 23 16 6 716
Utility Series 26" Tool CabinetsProduct Code Description
50807 26" 6-Drawer Top ChestTB-6024RA 26" 6-Drawer Top Chest with Drop Front50835 27" 3-Drawer Roll Cabinet
TB-6024RA & 50807 Top Chests, Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
3.073 26 12 14 12
Top Chests, Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
3 23 10 12 23 7 10 12 2
50835 Roll Cabinet Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
10472 27 18 34 35 58
Roll Cabinet Drawer Sizes
Number Width(inches) Depth(inches) Height(inches)
1 23 16 21 23 16 4 141 23 16 6
FeaturesHeavy bottom support rails.
High gloss powder coat paint is scratch & chem ical resistant.Heavy gauge metal for a lifetime of use.
Double wall construction for greater strength.Heavy duty 5" x 1-1/4" casters on cabinets.
Standard compound friction slides.
TB-602 4A pictured w ith opti onal to te try.
50803
50833
50807
50835
TB-6024RA
Pictured with optional tote tray
Color Options
Red: Standard
Black: B
Blue: BL
7/28/2019 Tool Storage - Herramientas
15/18
TOOL
STORAGE
UTILITY SERIESTOP CHESTS,
ROLL CABINETS& ADDITIONALSTORAGE
39
Heavy-Duty Road BoxDesigned with extra heavy-duty features for mobileuse in the factory or on the road in service trucks.Available in black only.Product Code Description
50946B 26" 5-Drawer Heavy Duty Road Box / Top Chest
50946B Road Box Overall DimensionsCapacity(cu. in.)
Width(inches)
Depth(inches)
Height(inches)
6749 26 17 78 22
Road Box Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
2 23 16 4 143 23 16 2
FeaturesDrop front panel has neoprene water & dust resistant seal.Shielded hinges for long life in harsh env ironments.
Cushion feet pads attached to bottom for protection.Extra heavy duty metal w ith 75 lb load rating per drawer.
Secure key internal locking system.
3-Drawer Service Cart with LidEasy and convenient access to tools when andwhere you need them.Product Code Description
50721 3-Drawer Service Cart with Lid
50721 Service Cart Overall DimensionsWidth
(inches)Depth
(inches)Height
(inches)
33 58 19 58 35 58
Service Cart Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
2 12 316 17 12 3 1161 25 58 17 12 3 116
FeaturesHigh gloss powder coat paint is scratch & chemical resistant.
Storage drawers for frequently used tools.Heavy duty side handles.
Heavy duty undercarriage to help support bottom tray load.
Lockable lid for security.18 gauge heavy duty steel.
4" x 1" swivel casters.
7-Drawer Side CabinetEasily extend tool storage capacityProduct Code Description
50851 30" 7-Drawer Heavy Duty Side Box
50851 Side Cabinet Overall Dimensions
Capacity(cu. in.) Width(inches) Depth(inches) Height(inches)
3921 15 18 34 30 12
Side Cabinet Drawer Sizes
NumberWidth
(inches)Depth
(inches)Height
(inches)
1 11 16 6 7162 11 16 4 144 11 16 2
FeaturesFits on both 50835 & 50833 27" wide roll cabinets.High gloss powder coat paint is scratch & chemical resistant.
Heavy gauge metal for a lifetime of use.
Double wall construction for greater strength.
Do not open more than one loaded drawer at a time. Close lid and lock drawers and doors before moving.
WARNING
50946B
50721
50851
7/28/2019 Tool Storage - Herramientas
16/18
TOOLSTORAGE
40
TB-6119A
19" Flat Top Toolbox
Product Code Width(Inches) Depth(Inches) Height(Inches) Cubic InchCapacity
TB-6119A 19 6 6 12 741
Ideal lor general use.
Steel tote tray keeps smaller Items handy.Combination drawbolt and padlock eye provide security.
26" Flat Top Toolbox
Product CodeWidth
(Inches)Depth
(Inches)Height
(Inches)Cubic InchCapacity
TB-6124A 26 8 34 9 1980
Ruggedly constructed hand tool box.Extra long tools up to 25" fit neatly inside.
Three c ompart ment t ray w ith soc ket div ider to keep small t ools be tter
organized and close at hand.Double drawbolts keep the lid tightly closed.
Padlock eye with slotted hasp provides security.
21" Four Tray Cantilever Toolbox
Product CodeWidth
(Inches)Depth
(Inches)Height
(Inches)Cubic InchCapacity
TB-6218A 21 14 8 34 12 1971
Four trays cantilever outward when box is open providing access to the
exceptionally deep box.Two of the trays featur e mova ble div iders a nd ano ther ha s a pro tective
cover to prevent small tools or parts from spilling into the box.
Formed feet in the box bottom add to strength and keep the box aw ay fromwet, dirty surfaces.
20" Hip Roof Toolbox
Product CodeWidth
(Inches)Depth
(Inches)Height
(Inches)Cubic InchCapacity
TB-6220A 20 7 8 959
Hip roof design for fitting bulky tools.Ideal for tradesman who carries bulky drills or 3/4 inch drive sets.
Extra large tote tray with deeper space betw een handle and tray bottom.Combination drawbolt and padlock eye provide security.
TB-6124A
TB-6218A
TB-6220A
7/28/2019 Tool Storage - Herramientas
17/18
TOOL
STORAGE
HAND CARRYBOXES,TOTE BAGS
41
Metal Socket Set ToolboxesRugged storage for Williams premium socket sets
Product CodeLength(Inches)
Width(Inches)
Height(Inches)
TB-101 10 7 1 12TB-102 13 9 1 34
TB-103 18 8 2TB-104 25 9 2TB-12 30 14 11 12 4 34TB-35 14 12 5 12 1 34TB-49 30 14 11 12 4 34
FeaturesRuggedly constructed for long life.
Ideal for storing socket sets, other tools, and small parts.
Custom Rugged-Case-System Tool CaseIdeal for Configuring Custom Tool Sets and SampleCases, and for Component StorageProduct Code Description
50650 Custom Rugged-Case-System Tool Case
FeaturesRugged high-density polyethylene (HDPE) cases are st rong and durable yet
light in weight.Case is shock proof at both high and low tem peratures, equipped with
heavy-duty metal latches and hinges.
Two-com ponent handles are ea sy to g rip and comfor table to carr y.Hollow storage area can be used as is or configured with a custom
foam insert.
Rugged Case System
Replacement Tool Boxes
Designed specifically for the Rugged Case SystemTools Sets
Product CodeFits RCS Set
NumberLength(Inches)
Width(Inches)
Height(Inches)
50629 50601 14 12 8 14 3 7850625 50603 11 6 14 2 5850627 50605 14 12 12 12 4 1450630 50607 14 12 12 12 4 1450626 50609 14 12 8 12 450628 50611 14 12 16 78 4 18
FeaturesDurable two component handle makes the case easy to grip and
comfortable to carry.Heavy-duty and easy to handle all-metal latch. Spring-loaded mechanism
completely disengages the lid.
The ne w str ong hing e cons tructio n makes the case m ore dura ble.
Tool Tote Bags
Product CodeLength(Inches)
Width(Inches)
Height(Inches)
JHW TOTE BAG 14 11 22530-R651-F 11 3/4 8 3/4 1/42530-1-R651-F 15 1/2 6 3/4 1/4
FeaturesConstructed from heavy Cordura for maximum durability.
Ideal for storing and toting tools, parts, and supplies.Heavy duty zippers for extra long life.
TB-103
50650
50627
2530-R651-F 2530-1-R651-FJHW TOTE BAG
7/28/2019 Tool Storage - Herramientas
18/18
TOOLSTORAGE
42
Roll PouchesCustomize Your Own Tool Sets
Product CodeNumber of
PocketsWidth
(Inches)Height
(Inches)
R-1 5 6 7 12R-2 5 8 12R-3 5 11 12 15 12R-4 5 12 12 18 12R-5 5 16 25R-8 15 17 14 10 12R-10 10 19 34 17 14R-11 10 26 12 25R-13 10 34 12 32R-14 14 20 14 9 34R-15 14 15 14 16 34R-20 14 14 12 8R-23 8 23 14 26R-24 4 8 34 11R-27 17 23 14 17 34R-28 26 19 12 27R-29 8 11 12 34R-30 9 14 58 13R-30X 9 14 34 8 12R-31 6 13 14 16R-36 9 9 14 10 12
R-37 15 37 261
2R-38 7 13 16 34R-41 11 24 20R-42 7 12 34 16R-43 7 13 16 12R-47 7 12 34 14 12R-48 3 15 14 9 14R-49 12 25 58 29
Features
Heavy construction for long life.
Ideal for storing a variety of tools such as wrenches, extensions,and ratchets.
R-9
See-Through Roll Pouches withVelcro Fastening
Product CodeNumber of
PocketsWidth
(Inches)Height
(Inches)
23051 3 11 1211991 9 17 12 1411941 7 13 13 14
Features
Extra heavy construction with velcro fastening.
Clear plastic front panels allows full visibility to tools.
Socket Rails and ClipsProduct Code Description Length (Inches)
R-9 Socket Rail 9R-13R Socket Rail 13R-17 Socket Rail 17Product Code Description Drive Size (Inches)
RC-25 Socket Clip 14RC-37 Socket Clip 38RC-50 Socket Clip 12RC-75 Socket Clip 34
Features
Socket clips sold individually.
All rails hold an y size clips.
R-4
23051