Technical Catalog for
JU/JW Engine Series (with English to German Translator Pages)
(Mit Englisch zu Deutsch Ubersetzung Seiten) (with English to Spanish Translator Pages)
(Traductor del Ingls al Espaol) (with English to French Translator Pages)
(Traducteur Anglais > Franais canadien)
This manual covers John Deere Series engines prepared by Clarke for fire pump service
Clarke UK, Ltd. Clarke Fire Protection Products, Inc. Unit 1, Grange Works 3133 E. Kemper Road
Lomond Road Cincinnati, OH 45241 Coatbridge U.S.A. ML5 2NN
United Kingdom TELE: +44(0)1236 429946 FAX: +44(0)1236 427274
TELE: +1.513.771.2200 Ext. 427 FAX: +1.513.771.5375
www.clarkefire.com
C13965 rev W 7/12
CONTENTS SUBJECT Document No. English to German I&O Data Translator for German (Englisch zu Deutsch I&O Daten Ubersetzer fr Deutsch) C13973
English to Spanish I&O Data Translator for Spanish (Traductor del Ingls al Espaol) C13986
English to French I&O Data Translator for French (Traducteur Anglais > Franais) C131399
JU4H-UF10 (USA) C13663
JU4H-UF10 (UK) C131234
JU4H-UF12 (USA) C133688
JU4H-UF12 (UK) U131219
JU4H-UF14 (USA) C131262
JU4H-UF14 (UK) C131263
JU4H-UF20 (USA) C13611
JU4H-UF20 (UK) C131235
JU4H-UF22 (USA) C133689
JU4H-UF22 (UK) U131217
JU4H-UFAB26 (USA) C132951
JU4H-UF24 (USA) C131264
JU4H-UF24 (UK) C131265
JU4H-UF28 C131600
JU4H-UF30 (USA) C13664
JU4H-UF30 (UK) C131228
JU4H-UF32 (USA) C133690
JU4H-UF32 (UK) U131220
JU4H-UFH8 (USA) C131398
JU4H-UFH8 (UK) U131198
JU4H-UFH0 (USA) C131397
JU4H-UFH0 (UK) U131199
JU4H-UFH2 (USA) C131396
JU4H-UFH2 (UK) U131200
JU4H-UF34 (USA) C131266
JU4H-UF34 (UK) C131267
JU4H-UF40 (USA) C13665
JU4H-UF40 (UK) C131229
JU4H-UF42 (USA) C133691
JU4H-UF42 (UK) U131221
JU4H-UF58 (USA) C131395
JU4H-UF58 (UK) U131201
JU4H-UF50 (USA) C13612
JU4H-UF50 (UK) C131230
JU4H-UF52 (USA) C133692
JU4H-UF52 (UK) U131218
JU4H-UF54 (USA) C131270
JU4H-UF54 (UK) C131271
JU4H-UFADJ8 (USA) C133775
JU4H-UFADJ2 (USA) C133779
JU4H-UFAEA0 (USA) C133776
JU4H-UFAEE8 (USA) C133777
JU4H-UFAEF2 (USA) C133778
JU4R-UF09 (USA) C131407
JU4R-UF09 (UK) C131651
JU4R-UF11 (USA) C133693
JU4R-UF11 (UK) U131234
JU4R-UF13 (USA) C131409
JU4R-UF13 (UK) C131652
JU4R-UF19 (USA) C131408
JU4R-UF19 (UK) U131232
JU4R-UF21 (USA) C133694
JU4R-UF21 (UK) C131653
JU4R-UF23 (USA) C131410
JU4R-UF23 (UK) C131654
JU4R-UF40 (USA) C131411
JU4R-UF40 (UK) C131655
JU4R-UF49 (USA) C131412
JU4R-UF49 (UK) U131230
JU4R-UF51 (USA) C133695
JU4R-UF51(UK) C131656
JU4R-UF53 (USA) C131413
JU4R-UF53 (UK) C131657
JU4R-UFAEA9 (USA) C133780
JU4R-UFAEE7 (USA) C133781
JU4R-UFAEF1 (USA) C133782
JU6H-UFD0 (USA) C131394
JU6H-UFD0 (UK) U131202
JU6H-UFD2 (USA) C131393
JU6H-UFD2 (UK) U131203
JU6H-UF30 (USA) C13507
JU6H-UF30 (UK) C131231
JU6H-UF32 (USA) C133696
JU6H-UF32 (UK) U131227
JU6H-UFG8 (USA) C131392
JU6H-UFG8 (UK) U131204
JU6H-UFM8 (USA) C131391
JU6H-UFM8 (UK) U131205
JU6H-UFM0 (USA) C131390
JU6H-UFM0 (UK) U131206
JU6H-UFM2 (USA) C131389
JU6H-UFM2 (UK) U131207
JU6H-UF34 (USA) C131274
JU6H-UF34 (UK) C131275
JU6H-UFABL8 (USA) C132948
JU6H-UFABL0 (USA) C132949
JU6H-UFABL2 (USA) C132950
JU6H-UF50 (USA) C13508
JU6H-UF50 (UK) C131232
JU6H-UF52 (USA) C133697
JU6H-UF52 (UK) U131228
JU6H-UF54 (USA) C131276
JU6H-UF54 (UK) C131277
JU6H-UF58 (USA) C131388
JU6H-UF58 (UK) C131593
JU6H-UF60 (USA) C13509
JU6H-UF60 (UK) C131223
JU6H-UF62 (USA) C133698
JU6H-UF62 (UK) C131226
JU6H-UF68 (USA) C131387
JU6H-UF68 (UK) U131208
JU6H-UFAB76 (USA) C132952
JU6H-UF84 (USA) C131278
JU6H-UF84 (UK) C131279
JU6H-UFAAPG (USA) C133840
JU6H-UFAARG (USA) C133042
JU6H-UFAAQ8 (USA) C133107
JU6H-UFAAS0 (USA) C133841
JU6H-UFKAPG (UK) U131252
JU6H-UFKAQ8 (UK) C133108
JU6H-UFKARG (UK) C133045
JU6H-UFKAS0 (UK) U131254
JW6H-UF30 (USA) C13426
JW6H-UF30 (UK) C132031
JW6H-UF38 (USA) C131386
JW6H-UF48 (USA) C131385
JW6H-UF48 (UK) U131209
JW6H-UF40 (USA) C13427
JW6H-UF40 (UK) C132032
JW6H-UF58 (USA) C131384
JW6H-UF58 (UK) U131210
JW6H-UF50 (USA) C13613
JW6H-UF50 (UK) C132033
JW6H-UFH8 (USA) C132024
JW6H-UFH8 (UK) C131211
JW6H-UF60 (USA) C13614
JW6H-UF60 (UK) C132034
JW6H-UFAAM8 (USA) C133119
JW6H-UFAAM8 (UK) U131248
JW6H-UFAA80 (USA) C133118
JW6H-UFAA80 (UK) U131250
JU4H-NL14 C131253
JU4H-NL20 C13735
JU4H-NL22 U131222
JU4H-NL24 C131254
JU4H-NL34 C131255
JU4H-NL44 C131256
JU4H-NL50 C13738
JU4H-NL52 U131223
JU4H-NLK4 C132016
JU4H-NL54 C131257
JU4R-NL09 C132009
JU4R-NL11 U131235
JU4R-NL13 C132010
JU4R-NL19 U131233
JU4R-NL21 C132011
JU4R-NL23 C132012
JU4R-NL40 C132013
JU4R-NL49 U131231
JU4R-NL51 C132014
JU4R-NL53 C132015
JU6H-NL30 C13739
JU6H-NL32 U131229
JU6H-NL34 C131259
JU6H-NL50 C13742
JU6H-UF52 U131224
JU6H-NLM4 C132017
JU6H-NL54 C131260
JU6H-NL60 C13743
JU6H-NL62 U131225
JU6H-NL74 C131383
JU6H-NLR4 C132018
JU6H-NL84 C131261
JU6H-NLKAPG U131258
JU6H-NLKAQ8 C133109
JU6H-NLKARG C133043
JU6H-NLKAS0 U131256
JW6H-NL30 C13997
JW6H-NL40 C13998
JW6H-NL50 C13999
JW6H-NL60 C131000
JW6H-NLAAM8 C133924
JW6H-NLAA80 C133923
JU4H-LP20 C131244
JU4H-LP24 C131252
JU4H-LP50 C131245
JU4H-LPL4 C132640
JU4H-LP54 C131249
JU6H-LP50 C131246
JU6H-LP54 C131251
JU6H-LP60 C131247
JU6H-LP84 C131248
JU4H-AP50 C132129
JU4H-AP54 C132184
JU6H-AP30 C132130
JU6H-AP34 C131286
JU6H-AP50 C132131
JU6H-AP54 C131287
JU6H-AP60 C132132
JU6H-AP84 C131288
JW6H-AP30 C132133
JW6H-AP40 C132134
JW6H-AP50 C132135
JW6H-AP60 C132136
English to French Translator for C13977 (Traducteur Anglais > Franais) C131052
NFPA 20 Cooling Loop Piping Detail C13977
NFPA 20 Exhaust Piping Detail C06918
Battery Kit Specifications: All UL/FM NFPA20 Engine Models C131885
Fuel Tank and Fuel Supply Schematic Per NFPA20 C132026
English to Spanish Translator for C07575 (Traductor del Ingls al Espaol) C13995
English to French Translator for C07575 (Traducteur Anglais > Franais) C131060
NFPA 20 and FM Engine Gauge Panel (DC Voltage) JU Engines (for engines prior to Feb 2003) C07575
NFPA 20 and FM Engine Gauge Panel (DC Voltage) JU Engines (for engines Feb 2003 May 2009) C07575
NFPA 20 and FM Engine Gauge Panel (DC Voltage) JU Engines (for engines May 2009 Sept 2010) C07575
NFPA 20 and FM Engine Gauge Panel (DC Voltage) JU Engines (for engines Sept 2010 May 2011) C071612
NFPA 20 and FM Engine Gauge Panel (DC Voltage) JU Engines (for engines Begin May 2011) C071590
English to German Translator for C07602 (Englisch zu Deutsch bersetzung fr C07602) C13969
English to Spanish Translator for C07602 (Traductor del Ingls al Espaol) C13987
English to French Translator for C07602 (Traducteur Anglais > Franais) C131062
NFPA 20 and FM Engine Gauge Panel (DC Voltage) JW Engines (for engines built prior 2003) C07602
NFPA 20 and FM Engine Gauge Panel (DC Voltage) JW Engines (for engines Feb 2003 May 2009) C07602
NFPA 20 and FM Engine Gauge Panel (DC Voltage) JW Engines (for engines May 2009 Sept 2010) C07602
English to Spanish Translator for C07591 (Traductor del Ingls al Espaol) C13994
English to French Translator for C07591 (Traducteur Anglais > Franais) C131061
Engine Kim Jacket Water Heater (AC Voltage) (JU Engines prior to March 2012) C07591
English to German Translator for C07651 (Englisch zu Deutsch bersetzung fr C07651) C13972
English to Spanish Translator for C07651 (Traductor del Ingls al Espaol) C13988
English to French Translator for C07651(Traducteur Anglais > Franais) C131053
Engine Jacket Water Heater (AC Voltage) (JW/JD Engines and JU/JD Engines March 2012 Current) C07651
Parts Illustration (JU Engines) (USA) C13513
Parts Illustration (JU Engines) (UK) U131098
Parts Illustration (JW/JD Engines) C13340
C13973
English Text (Continued) NOTE: This engine is intended for indoor installation or in a weatherproof enclosure [1] Engine H20 temperature is dependent on raw water temperature and flow [2] High Coolant Switch threshold varies with engine load [3] Positive and Negative Cables Combined Length Exhaust System Exhaust Flow Exhaust Temperature
Maximum Allowable Back Pressure Minimum Exhaust Pipe Dia. Fuel System
Fuel Consumption Fuel Return Fuel Supply Fuel Pressure Minimum Line Size Supply
Schedule 40 Steel Pipe Pipe Outer Diameter Maximum Line Size Return
Schedule 40 Steel Pipe Pipe Outer Diameter Maximum Allowable Fuel Pump Suction Lift With Clean Filter Maximum Allowable Fuel Head above Fuel Pump, Supply or Return
Fuel Filter Micron Size Heater System Engine Coolant Heater
Wattage (Nominal) Voltage AC, 1P Part Number
Air System Combustion Air Flow Air Cleaner Part Number Type
Indoor service only, with shield Canister, single-stage
Cleaning Method Washable - Disposable
Air Intake Restriction Maximum Limit Dirty Air Cleaner Clean Air Cleaner
Maximum Allowable Temperature (Air to Engine Inlet) Lubrication System
Oil Pressure normal Low Oil Pressure Alarm Switch In Pan Oil Temperature Total Oil Capacity with Filter
Lube Oil Heater Wattage (Nominal) Voltage Part Number Performance
BMEP Piston Speed Mechanical Noise Power Curve
German Text
(Fortsetzung) HINWEIS: Diese Maschine ist fr Installation im Raum oder in einem wettergeschtzten Gehuse bestimmt. [1] Motorkhlmitteltemperatur ist abhngig von Rohwassertemperatur und Durchsatz. [2] Grenzwert Khlmitteltemperaturschalter ist von Motorlast abhngig. [3] Positive und negative Kabel Gesamtlnge Abgassystem Abgasstrom Abgastemperatur Maximal zulssiger Gegendruck Mindestauspuffrohrdurchmesser Kraftstoffsystem Kraftstoffverbrauch Kraftstoffrckfluss Kraftstoff Kraftstoffdruck Mindestleitungsgre Zufuhr
Anhang 40 Stahlrohr Auendurchmesser Leitung
Maximalleitungsgre Rcklauf Anhang 40 Stahlrohr
Auendurchmesser Leitung Max. zulssiger Ansaugdruck Kraftstoffpumpe
mit sauberem Filter Maximal zulssiger Kraftstoffdruck ber der Kraftstoffpumpe, Zufuhr oder Rcklauf Mikrongre Kraftstofffilter Erhitzersystem Motorkhlmittelheizung
Wattleistung (Nennwert) Spannung Wechselstrom, 1P
Teilnummer Luftsystem Verbrennungsluftdurchsatz Luftfilter
Teilnummer Typ
Nur Wartung in der Halle, mit abgeschirmtem Behlter, einstufig
Reinigungsmethode Waschbar - Einweg
Maximalgrenze fr Ansaugluftbegrenzung Schmutziger Luftfilter Sauberer Luftfilter Maximal zulssige Temperatur (Luft zum Motoreingang) Schmiersystem ldruck normalen ldruck-Alarmschalter ltemperatur in der Wanne Gesamtlmenge mit Filter Schmierlerhitzer Wattleistung (Nennwert) Spannung Wechselstrom, 1P Teilnummer Leistung BMEP
C13973
Kolbendrehzahl Mechanische Gerusche Leistungskurve
English Text (Continued) [4] Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded (Note: minimum exhaust Pipe diameter is based on: 15 feet of pipe, on 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) [5] Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [6] Low Oil Pressure Switch threshold varies with engine speed.
German Text (Fortsetzung) [4] Basierend auf Sollwerten. Rckstaudruck-Durchsatzanalyse muss durchgefhrt werden, um max. zulssigen Rckstaudruck nicht zu berschreiten (Hinweis: Mindestdurchmesser Auspuffrohr basiert auf: 4,5 m Rohr, 90 Bogen und Druckabfall Schalldmpfer nicht grer als der halbe zulssige Rckstaudruck). [5] PS a weichend, wenn Ansaugluft wrmer als 25 C. [6] Grenzwert ldruckschalter ist von Motordrehzahl abhngig.
C13986
Clarke Installation and Operation Datasheets
English to Spanish I&O Data Translator USA Produced English Text
Basic Engine Description Engine Manufacturer
Ignition Type
Compression (Diesel) Number of Cylinders
Bore and Stroke Displacement Compression Ratio
Valves per Cylinder - Intake - Exhaust Combustion System
Direct Injection Engine Type
In-Line, 4 Stroke Cycle Fuel Management Control
Electronic, High Pressure Common Rail Firing Order (CW Rotation)
Aspiration Turbocharged
Charge Air Cooling Type Raw Water
Rotation , viewed from front of engine, Clockwise (CW) Standard
Engine Crankcase Vent System Closed or Open
Installation Drawing Weight Power Rating Nameplate Power Cooling System
Engine Coolant Heat Engine Radiated Heat Heat Exchanger Minimum Flow
Raw H20 Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure Flow
Typical Engine H20 Operation Temp Thermostat, Start to Open C (F) Fully Opened Engine Coolant Capacity Coolant Pressure Cap Maximum Engine Coolant Temperature Minimum Engine Coolant Temperature High Coolant Temp Alarm Switch Electric System DC System Voltage (Nominal)
Battery Capacity for Ambients Above Voltage (Nominal)
Qty. per Battery Bank SAE size per Reserve Capacity Minutes Battery Cable Circuit*, Max Resistance - ohm Battery Cable Minimum Size
Circuit Length Charging Alternator Maximum Output Amp Starter Cranking Amps, Rolling
Hoja de Datos de Instalacin y Operacin de Clarke
Traductor de Datos de I&O del Ingls al Alemn Producido en EE.UU.
Texto en Espaol Descripcin de Motor Bsico
Fabricante del Motor
Tipo de Ignicin Compresin (Diesel)
Nmero de Cilindros Dimetro y Carrera Desplazamiento Relacin de Compresin Vlvulas por Cilindro - Admisin
- Escape Sistema de Combustin
Inyeccin Directa Tipo de Motor
En Lnea, Ciclo de Carrera Control de administracin de combustible
Riel electrnico comn de alta presin Orden de Encendido (Rotacin en sentido contrario a las manecillas del reloj) Aspiracin
Turboalimentado Tipo de enfriamiento con aire de carga
Agua cruda Rotacin, vista desde la parte frontal del motor, Sentido horario (CW) Estndar Sistema de Ventilacin del Crter del Motor Cerrado O Abierto Diagrama de Instalacin Peso Rango de potencia Potencia de la placa de inscripcin Sistema de Enfriamiento Calor del refrigerante del motor Calor Irradiado por el Motor Flujo Mnimo del Intercambiador de Calor
Agua cruda Enfriamiento Mximo del Intercambiador de Calor
Presin de Entrada Flujo
Temperatura de operacin del H2O del motor tpico Termostato, Inicio de Abertura Totalmente Abierto Capacidad de Refrigerante del Motor Tapn de Presin del Refrigerante Mxima temperatura del refrigerante del motor Mnima temperatura del refrigerante del motor Interruptor de alarma de alta temperatura del refrigerante Sistema Elctrico - DC Voltaje de Sistema (Nominal) Capacidad de Batera para Ambientes que exceden
el Voltaje (Nominal) Cantidad por Banco de Bateras
Tamao SAE por Capacidad de Reserva - Minutos
Circuito de Cable de Batera*, Resistencia Mxima - ohm Tamao Mnimo de Cable de Batera Largo de Circuito* Salida mxima del alternador de carga Amperios Amperaje de Giro del Arrancador, Cilindrado
C13986
English Text (Continued) NOTE: This engine is intended for indoor installation or in a weatherproof enclosure [1] Engine H20 temperature is dependent on raw water temperature and flow [2] High Coolant Switch threshold varies with engine load [3] Positive and Negative Cables Combined Length Exhaust System Exhaust Flow Exhaust Temperature
Maximum Allowable Back Pressure Minimum Exhaust Pipe Dia. Fuel System
Fuel Consumption Fuel Return Fuel Supply Fuel Pressure Minimum Line Size Supply
Schedule 40 Steel Pipe Pipe Outer Diameter Maximum Line Size Return
Schedule 40 Steel Pipe Pipe Outer Diameter Maximum Allowable Fuel Pump Suction Lift With Clean Filter Maximum Allowable Fuel Head above Fuel Pump, Supply or Return
Fuel Filter Micron Size Heater System Engine Coolant Heater
Wattage (Nominal) Voltage AC, 1P Part Number
Air System Combustion Air Flow Air Cleaner Part Number Type
Indoor service only, with shield Canister, single-stage
Cleaning Method Washable - disposable
Air Intake Restriction Maximum Limit Dirty Air Cleaner Clean Air Cleaner
Maximum Allowable Temperature (Air to Engine Inlet) Lubrication System
Oil Pressure normal Low Oil Pressure Alarm Switch In Pan Oil Temperature Total Oil Capacity with Filter
Lube Oil Heater Wattage (Nominal) Voltage Part Number Performance
BMEP Piston Speed Mechanical Noise Power Curve
Texto en Espaol (Contina) NOTA: El motor es para instalacin en interiores o en una Cubierta a Prueba de Intemperie. [1] La temperatura del H2O del motor depende de la temperatura y el flujo del agua cruda. [2] El umbral del interruptor del refrigerante alto vara con la carga del motor. [3] Longitud combinada de cables positivo y negativo Sistema de Escape Flujo de Escape Temperatura de Escape Contrapresin Mxima Permitida Dimetro mnimo de Tubo de Escape Sistema de Combustible Consumo de Combustible Retorno de Combustible Suministro de combustible Presin de Combustible Tamao Mnimo de Lnea Suministro
Programe 40 tubos de acero Dimetro externo del tubo Tamao Mximo de Lnea Retorno
Programe 40 tubos de acero Dimetro externo del tubo
Mxima elevacin permitida de succin de la bomba de combustible con el filtro limpio
Con Filtro Limpio Mxima Presin Permitida del Combustible Permitida de la Bomba, Suministro o Retorno
Tamao en Micras del Filtro de Combustible Sistema Calentador Calentador del refrigerante del motor Wattaje (Nominal) Voltaje - A.C., 1P Nmero de parte Sistema de aire Flujo del aire de combustin Purificador de aire Nmero de parte Tipo
Solamente para servicio en interiores, con recipiente protector, etapa nica
Mtodo de limpieza Lavable - desechable
Lmite Mximo de Restriccin de Aire Purificador de Aire Sucio Purificador de Aire Limpio Temperatura Mxima Permitida (Entrada de Aire al Motor) Sistema de Lubricacin Presin de Aceite Normal Interruptor de alarma de presin de aceite baja Temperatura de Aceite del Colector Capacidad Total de Aceite con Filtro Calentador de Aceite Lubricante Wattaje (Nominal) Voltaje Nmero de parte Operacin BMEP Velocidad de Pistones Ruido mecnico Curva de Potencia
C13986
English Text (Continued) [4] Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded (Note: minimum exhaust Pipe diameter is based on: 15 feet of pipe, on 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) [5] Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [6] Low Oil Pressure Switch threshold varies with engine speed.
Texto en Espaol (Contina) [4] Basado en el sistema nominal. El anlisis de flujo de la contrapresin se debe hacer para garantizar la mxima contrapresin permitida que no se exceda (Nota: el dimetro del tubo de escape mnimo se basa en: Tubo de 15 pies, en un codo de 90 y la cada de presin de un silenciador no es superior a la mitad de la contrapresin mxima permitida.) [5] Revisin de la reduccin de la potencia si el aire del ambiente que entra al motor supera los 77F (25C). [6] El umbral del interruptor de presin de aceite vara con la velocidad del motor
C131399
Clarke Installation and Operation Datasheets
English to French-Canadian I&O Data Translator USA Produced English Text
Basic Engine Description Engine Manufacturer
Ignition Type Compression (Diesel)
Number of Cylinders Bore and Stroke Displacement Compression Ratio
Valves per Cylinder - Intake - Exhaust Combustion System
Direct Injection Engine Type
In-Line, 4 Stroke Cycle Fuel Management Control
Electronic, High Pressure Common Rail Firing Order (CW Rotation)
Aspiration Turbocharged
Charge Air Cooling Type Raw Water
Rotation , viewed from front of engine, Clockwise (CW) Standard
Engine Crankcase Vent System Closed - Open
Installation Drawing Weight Power Rating Nameplate Power Cooling System
Engine Coolant Heat Engine Radiated Heat Heat Exchanger Minimum Flow
Raw H20 Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure Flow
Typical Engine H20 Operation Temp Thermostat, Start to Open C (F) Fully Opened Engine Coolant Capacity Coolant Pressure Cap Maximum Engine Coolant Temperature Minimum Engine Coolant Temperature High Coolant Temp Alarm Switch Electric System DC System Voltage (Nominal)
Battery Capacity for Ambients Above Voltage (Nominal)
Qty. per Battery Bank SAE size per Reserve Capacity Minutes Battery Cable Circuit*, Max Resistance - ohm Battery Cable Minimum Size
Circuit Length Charging Alternator Maximum Output Amp Starter Cranking Amps, Rolling
Fiches techniques dinstallation et dutilisation de Clarke
Traducteur Anglais > Franais des donnes d'installation et d'utilisation Produit aux Etats-Unis
Texte en franais canadien Description lmentaire du moteur Fabricant du moteur Type dallumage
Compression (Diesel) Nombre de cylindres Alsage et course Cylindre Rapport de compression Soupapes par cylindre - Admission - chappement Systme de combustion
Injection directe Type de moteur
En ligne 4 temps Contrle de gestion du carburant
Rampe commune lectronique, haute pression Ordre dallumage (rotation anti-horaire) Aspiration
Turbocompress Type de refroidisseur dair de suralimentation
Eau brute Rotation, vue de lavant du moteur, rotation droite
Standard Systme de respiration du carter de moteur
Ouvert- ferm Plan dinstallation Poids Puissance nominale Puissance assigne Systme de refroidissement Chaleur du liquide de refroidissement Chaleur mise par le moteur coulement minimal de lchangeur de chaleur
Eau brute Refroidissement maximal de lchangeur de chaleur
Pression dentre coulement
Temprature de fonctionnement de moteur H2O classique Thermostat, Dbut douverture Ouverture totale Capacit de liquide de refroidissement du moteur Bouchon de radiateur Temprature de refroidisseur du moteur maximale Temprature de refroidisseur du moteur minimale Interrupteur dalarme de temprature de refroidisseur leve Systme lectrique courant continu Tension du systme (nominale) Capacit de la batterie pour les conditions ambiantes ci-dessus Tension (nominale)
Qt. par jeu de batteries Taille SAE selon J537
Capacit de rserve minutes Circuit de cblage de la batterie*, rsistance maximale ohms Taille minimale des cbles de batterie Longueur du circuit Puissance maximale de lalternateur de recharge Amp Courant de lancement du dmarreur, en marche
C131399
English Text (Continued) NOTE: This engine is intended for indoor installation or in a weatherproof enclosure [1] Engine H20 temperature is dependent on raw water temperature and flow [2] High Coolant Switch threshold varies with engine load [3] Positive and Negative Cables Combined Length Exhaust System Exhaust Flow Exhaust Temperature
Maximum Allowable Back Pressure Minimum Exhaust Pipe Dia. Fuel System
Fuel Consumption Fuel Return Fuel Supply Fuel Pressure Minimum Line Size Supply
Schedule 40 Steel Pipe Pipe Outer Diameter Maximum Line Size Return
Schedule 40 Steel Pipe Pipe Outer Diameter Maximum Allowable Fuel Pump Suction Lift With Clean Filter Maximum Allowable Fuel Head above Fuel Pump, Supply or Return
Fuel Filter Micron Size Heater System
Engine Coolant Heater Wattage (Nominal) Voltage AC, 1P Part Number
Air System Combustion Air Flow Air Cleaner Part Number Type
Indoor service only, with shield Canister, single-stage
Cleaning Method Washable - Disposable
Air Intake Restriction Maximum Limit Dirty Air Cleaner Clean Air Cleaner
Maximum Allowable Temperature (Air to Engine Inlet) Lubrication System
Oil Pressure normal Low Oil Pressure Alarm Switch In Pan Oil Temperature Total Oil Capacity with Filter
Lube Oil Heater Wattage (Nominal) Voltage Part Number Performance
BMEP Piston Speed Mechanical Noise Power Curve
Texte en franais canadien (Suite) REMARQUE : Ce moteur est prvu pour une installation en intrieur ou dans un caisson protg des intempries. [1] La temprature du moteur H2O dpend de la temprature et du dbit de leau brute. [2] Le seuil du slecteur de liquide de refroidissement suprieur varie selon la charge du moteur. [3] Longueur combine des cbles positifs et ngatifs Systme dchappement
Dbit dchappement Temprature dchappement
Contre-pression maximale admissible Diamtre minimal du tuyau dchappement Systme dalimentation en carburant
Consommation de carburant Retour du carburant Alimentation en carburant Pression du carburant Taille minimale des conduites alimentation
Tuyau acier Catgorie 40 Diamtre externe de tuyau
Taille maximale des conduites retour Tuyau acier Catgorie 40
Diamtre externe de tuyau Hauteur daspiration maximum pour pompe dinjection
avec filtre propre Hauteur de charge de carburant maximale admissible au-dessus de la pompe, alimentation ou retour
Taille du filtre carburant en microns Systme de rchauffage
Refroidisseur moteur Puissance (nominale) Tension alternatif, monophas Numro darticle
Circuit dair Dbit dair secondaire Filtre air
Numro darticle Type
Entretien en intrieur uniquement, avec cran absorbant, monophas
Mthode de filtrage Lavable - Jetable
Limite maximale de la restriction dentre dair Filtre air sale Filtre air propre
Temprature maximale admissible (air dentre du moteur) Systme de lubrification
Pression dhuile normale Interrupteur dalarme de pression dhuile basse Temprature de lhuile dans le carter Capacit dhuile totale avec le filtre
Chauffe-carter Puissance (nominale) Tension alternatif, monophas Numro darticle
Performances BMEP Vitesse du piston Bruit mcanique Courbe de puissance
C131399
English Text (Continued) [4] Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded (Note: minimum exhaust Pipe diameter is based on: 15 feet of pipe, on 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) [5] Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [6] Low Oil Pressure Switch threshold varies with engine speed.
Texte en franais canadien (Suite) [4] Bas sur le systme nominal. Il faut effectuer une analyse du dbit de contre-pression pour viter le dpassement de la limite maximum de contre-pression permise. (Remarque : le diamtre du tuyau dchappement est bas sur : 4,5 mtres de tuyau, coud 90, et une baisse de pression du silencieux infrieure la moiti de la contre-pression maximum permise). [5] Etudier une rduction de la puissance nominale si l'air ambiant pntrant le moteur dpasse les 25C (77F). [6] Le seuil du commutateur dhuile moteur varie selon la vitesse du moteur
JU4H-UF10
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - in (mm) 4.19 (106) X 5 (127) Displacement - in (L) 275 (4.5) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D534 Weight - lb (kg) 910 (413)
Power Rating 1760 2100 2350 Nameplate Power - HP (kW) 41 (31) 51 (38) 55 (41)
Cooling System - [C051128] 1760 2100 2350 Engine Coolant Heat - Btu/sec (kW) 19 (20) 28 (29.5) 40 (42.2) Engine Radiated Heat - Btu/sec (kW) 8 (8.4) 11 (11.6) 11 (11.6) Heat Exchanger Minimum Flow
60F (15C) Raw H20 - gal/min (L/min) 6 (22.7) 7 (26.5) 8 (30.3)
95F (35C) Raw H20 - gal/min (L/min) 8 (30.3) 9 (34.1) 10 (37.9) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - psi (bar) 60 (4.1)
Flow - gal/min (L/min) 40 (151) Typical Engine H20 Operating Temp - F (C)[1] 180 (82.2) - 195 (90.6) Thermostat
Start to Open - F (C) 187 (86.1)
Fully Opened - F (C) 196 (91.1) Engine Coolant Capacity - qt (L) 14.79 (14) Coolant Pressure Cap - lb/in (kPa) 10 (68.9) Maximum Engine Coolant Temperature - F (C) 200 (93.3) Minimum Engine Coolant Temperature - F (C) 160 (71.1) High Coolant Temp Alarm Switch - F (C) 205 (96.1)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 32F (0C)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ 0F (-18C) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-120 in. Circuit Length[2] 00 00
121-160 in. Circuit Length [2] 000 000 161-200 in. Circuit Length [2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C07639] 40 [C071048] Starter Cranking Amps, Rolling - @60F (15C) 345 [RE59595/RE59589] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF10
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 1760 2100 2350 Exhaust Flow - ft./min (m/min) 379 (10.7) 415 (11.8) 469 (13.3) Exhaust Temperature - F (C) 740 (393) 918 (492) 1083 (584) Maximum Allowable Back Pressure - in H20 (kPa) 30 (7.5) 30 (7.5) 30 (7.5) Minimum Exhaust Pipe Dia. - in (mm)[3] 3 (76.2) 3 (76.2) 3 (76.2)
Fuel System 1760 2100 2350 Fuel Consumption - gal/hr (L/hr) 2.2 (8.3) 2.8 (10.6) 3.1 (11.7) Fuel Return - gal/hr (L/hr) 7.9 (29.9) 8.5 (32.2) 9 (34.1) Fuel Supply - gal/hr (L/hr) 10.1 (38.2) 11.3 (42.8) 12.1 (45.8) Fuel Pressure - lb/in (kPa) 3 (20.7) - 6 (41.4) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.848 (21.5) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.675 (17.1) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - in H20 (mH20) 31 (0.8)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - ft (m) 4.5 (1.4) Fuel Filter Micron Size 5
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 115 (+5%, -10%) 230 (+5%, -10%) Part Number [C122188] [C122192]
Air System 1760 2100 2350 Combustion Air Flow - ft./min (m/min) 140 (4) 155 (4.4) 166 (4.7) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - in H20 (kPa) 10 (2.5) 10 (2.5)
Clean Air Cleaner - in H20 (kPa) 5 (1.2) 5 (1.2) Maximum Allowable Temperature (Air To Engine Inlet) - F (C)[4] 130 (54.4)
Lubrication System Oil Pressure - normal - lb/in (kPa) 35 (241) - 50 (345) Low Oil Pressure Alarm Switch - lb/in (kPa) 20 (138) In Pan Oil Temperature - F (C) 220 (104) - 245 (118) Total Oil Capacity with Filter - qt (L) 15.5 (14.7)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 120V (+5%, -10%) 240V (+5%, -10%) Part Number C04430 C04431
Performance 1760 2100 2350 BMEP - lb/in (kPa) 67 (462) 70 (483) 67 (462) Piston Speed - ft/min (m/min) 1467 (447) 1750 (533) 1958 (597) Mechanical Noise - dB(A) @ 1m C13905 Power Curve C13646 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2C13663 Rev LMD 12FEB12
JU4H-UF10
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - mm (in) 106 (4.19) X 127 (5) Displacement - L (in) 4.5 (275) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D545 Weight - kg (lb) 413 (910)
Power Rating 1760 2100 2350 Nameplate Power - kW (HP) 31 (41) 38 (51) 41 (55)
Cooling System - [C051001] 1760 2100 2350 Engine Coolant Heat - kW (Btu/sec) 20 (19) 29.5 (28) 42.2 (40) Engine Radiated Heat - kW (Btu/sec) 8.4 (8) 11.6 (11) 11.6 (11) Heat Exchanger Minimum Flow
15C (60F) Raw H20 - L/min (gal/min) 15.1 (4) 22.7 (6) 30.3 (8)
35C (95F) Raw H20 - L/min (gal/min) 22.7 (6) 30.3 (8) 37.9 (10) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - bar (psi) 4.1 (60)
Flow - L/min (gal/min) 98.4 (26) Typical Engine H20 Operating Temp - C (F)[1] 82.2 (180) - 90.6 (195) Thermostat
Start to Open - C (F) 86.1 (187)
Fully Opened - C (F) 91.1 (196) Engine Coolant Capacity - L (qt) 14 (14.79) Coolant Pressure Cap - kPa (lb/in) 68.9 (10) Maximum Engine Coolant Temperature - C (F) 93.3 (200) Minimum Engine Coolant Temperature - C (F) 71.1 (160) High Coolant Temp Alarm Switch - C (F) 96.1 (205)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 0C (32F)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ -18C (0F) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-3.1m Circuit Length[2] 00 00
3.1m-4.1m Circuit Length[2] 000 000 4.1m-5.1m Circuit Length[2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C071363] 55 [C071366] Starter Cranking Amps, Rolling - @15C (60F) 225 [C07888/C07889] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF10
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 1760 2100 2350 Exhaust Flow - m/min (ft./min) 10.7 (379) 11.8 (415) 13.3 (469) Exhaust Temperature - C (F) 393 (740) 492 (918) 584 (1083) Maximum Allowable Back Pressure - kPa (in H20) 7.5 (30) 7.5 (30) 7.5 (30) Minimum Exhaust Pipe Dia. - mm (in) [3] 76.2 (3) 76.2 (3) 76.2 (3)
Fuel System 1760 2100 2350 Fuel Consumption - L/hr (gal/hr) 8.3 (2.2) 10.6 (2.8) 11.7 (3.1) Fuel Return - L/hr (gal/hr) 29.9 (7.9) 32.2 (8.5) 34.1 (9) Fuel Supply - L/hr (gal/hr) 38.2 (10.1) 42.8 (11.3) 45.8 (12.1) Fuel Pressure - kPa (lb/in) 20.7 (3) - 41.4 (6) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 21.5 (0.848) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 17.1 (0.675) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - mH20 (in H20) 0.8 (31)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - m (ft) 1.4 (4.5) Fuel Filter Micron Size 5
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 230 (+5%, -10%) 115 (+5%, -10%) Part Number [C122192] [C122188]
Air System 1760 2100 2350 Combustion Air Flow - m/min (ft./min) 4 (140) 4.4 (155) 4.7 (166) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - kPa (in H20) 2.5 (10) 2.5 (10)
Clean Air Cleaner - kPa (in H20) 1.2 (5) 1.2 (5) Maximum Allowable Temperature (Air To Engine Inlet) - C (F)[4] 54.4 (130)
Lubrication System Oil Pressure - normal - kPa (lb/in) 241 (35) - 345 (50) Low Oil Pressure Alarm Switch - kPa (lb/in) 138 (20) In Pan Oil Temperature - C (F) 104 (220) - 118 (245) Total Oil Capacity with Filter - L (qt) 14.7 (15.5)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 240V (+5%, -10%) 120V (+5%, -10%) Part Number C04431 C04430
Performance 1760 2100 2350 BMEP - kPa (lb/in) 462 (67) 483 (70) 462 (67) Piston Speed - m/min (ft/min) 447 (1467) 533 (1750) 597 (1958) Mechanical Noise - dB(A) @ 1m C13905 Power Curve C131933 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2C131234 Rev H
MD 27FEB12
JU4H-UF12
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - in (mm) 4.19 (106) X 5 (127) Displacement - in (L) 275 (4.5) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D534 Weight - lb (kg) 910 (413)
Power Rating 2100 2350 2600 Nameplate Power - HP (kW) 51 (38) 55 (41) 59 (44)
Cooling System - [C051128] 2100 2350 2600 Engine Coolant Heat - Btu/sec (kW) 28 (29.5) 40 (42.2) 42 (44.3) Engine Radiated Heat - Btu/sec (kW) 11 (11.6) 11 (11.6) 12 (12.7) Heat Exchanger Minimum Flow
60F (15C) Raw H20 - gal/min (L/min) 7 (26.5) 8 (30.3) 9 (34.1)
95F (35C) Raw H20 - gal/min (L/min) 9 (34.1) 10 (37.9) 11 (41.6) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - psi (bar) 60 (4.1)
Flow - gal/min (L/min) 40 (151) Typical Engine H20 Operating Temp - F (C)[1] 180 (82.2) - 195 (90.6) Thermostat
Start to Open - F (C) 187 (86.1)
Fully Opened - F (C) 196 (91.1) Engine Coolant Capacity - qt (L) 14.79 (14) Coolant Pressure Cap - lb/in (kPa) 10 (68.9) Maximum Engine Coolant Temperature - F (C) 200 (93.3) Minimum Engine Coolant Temperature - F (C) 160 (71.1) High Coolant Temp Alarm Switch - F (C) 205 (96.1)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 32F (0C)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ 0F (-18C) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-120 in. Circuit Length[2] 00 00
121-160 in. Circuit Length [2] 000 000 161-200 in. Circuit Length [2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C07639] 40 [C071048] Starter Cranking Amps, Rolling - @60F (15C) 345 [RE59595/RE59589] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF12
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 2100 2350 2600 Exhaust Flow - ft./min (m/min) 415 (11.8) 469 (13.3) 531 (15) Exhaust Temperature - F (C) 918 (492) 1083 (584) 1055 (568) Maximum Allowable Back Pressure - in H20 (kPa) 30 (7.5) 30 (7.5) 30 (7.5) Minimum Exhaust Pipe Dia. - in (mm)[3] 3 (76.2) 3 (76.2) 3 (76.2)
Fuel System 2100 2350 2600 Fuel Consumption - gal/hr (L/hr) 2.8 (10.6) 3.1 (11.7) 3.4 (12.9) Fuel Return - gal/hr (L/hr) 8.5 (32.2) 9 (34.1) 9.5 (36) Fuel Supply - gal/hr (L/hr) 11.3 (42.8) 12.1 (45.8) 12.9 (48.8) Fuel Pressure - lb/in (kPa) 3 (20.7) - 6 (41.4) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.848 (21.5) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.675 (17.1) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - in H20 (mH20) 31 (0.8)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - ft (m) 4.5 (1.4) Fuel Filter Micron Size 5
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 115 (+5%, -10%) 230 (+5%, -10%) Part Number [C122188] [C122192]
Air System 2100 2350 2600 Combustion Air Flow - ft./min (m/min) 155 (4.4) 166 (4.7) 186 (5.3) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - in H20 (kPa) 10 (2.5) 10 (2.5)
Clean Air Cleaner - in H20 (kPa) 5 (1.2) 5 (1.2) Maximum Allowable Temperature (Air To Engine Inlet) - F (C)[4] 130 (54.4)
Lubrication System Oil Pressure - normal - lb/in (kPa) 35 (241) - 50 (345) Low Oil Pressure Alarm Switch - lb/in (kPa) 20 (138) In Pan Oil Temperature - F (C) 220 (104) - 245 (118) Total Oil Capacity with Filter - qt (L) 15.5 (14.7)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 120V (+5%, -10%) 240V (+5%, -10%) Part Number C04430 C04431
Performance 2100 2350 2600 BMEP - lb/in (kPa) 70 (483) 67 (462) 65 (448) Piston Speed - ft/min (m/min) 1750 (533) 1958 (597) 2167 (661) Mechanical Noise - dB(A) @ 1m C13906 Power Curve C13647 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2C133688 Rev B
MD 12FEB12
JU4H-UF12
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - mm (in) 106 (4.19) X 127 (5) Displacement - L (in) 4.5 (275) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D545 Weight - kg (lb) 413 (910)
Power Rating 2100 2350 2600 Nameplate Power - kW (HP) 38 (51) 41 (55) 44 (59)
Cooling System - [C051001] 2100 2350 2600 Engine Coolant Heat - kW (Btu/sec) 29.5 (28) 42.2 (40) 44.3 (42) Engine Radiated Heat - kW (Btu/sec) 11.6 (11) 11.6 (11) 12.7 (12) Heat Exchanger Minimum Flow
15C (60F) Raw H20 - L/min (gal/min) 22.7 (6) 30.3 (8) 37.9 (10)
35C (95F) Raw H20 - L/min (gal/min) 30.3 (8) 37.9 (10) 45.4 (12) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - bar (psi) 4.1 (60)
Flow - L/min (gal/min) 98.4 (26) Typical Engine H20 Operating Temp - C (F)[1] 82.2 (180) - 90.6 (195) Thermostat
Start to Open - C (F) 86.1 (187)
Fully Opened - C (F) 91.1 (196) Engine Coolant Capacity - L (qt) 14 (14.79) Coolant Pressure Cap - kPa (lb/in) 68.9 (10) Maximum Engine Coolant Temperature - C (F) 93.3 (200) Minimum Engine Coolant Temperature - C (F) 71.1 (160) High Coolant Temp Alarm Switch - C (F) 96.1 (205)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 0C (32F)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ -18C (0F) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-3.1m Circuit Length[2] 00 00
3.1m-4.1m Circuit Length[2] 000 000 4.1m-5.1m Circuit Length[2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C071363] 55 [C071366] Starter Cranking Amps, Rolling - @15C (60F) 225 [C07888/C07889] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF12
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 2100 2350 2600 Exhaust Flow - m/min (ft./min) 11.8 (415) 13.3 (469) 15 (531) Exhaust Temperature - C (F) 492 (918) 584 (1083) 568 (1055) Maximum Allowable Back Pressure - kPa (in H20) 7.5 (30) 7.5 (30) 7.5 (30) Minimum Exhaust Pipe Dia. - mm (in) [3] 76.2 (3) 76.2 (3) 76.2 (3)
Fuel System 2100 2350 2600 Fuel Consumption - L/hr (gal/hr) 10.6 (2.8) 11.7 (3.1) 12.9 (3.4) Fuel Return - L/hr (gal/hr) 32.2 (8.5) 34.1 (9) 36 (9.5) Fuel Supply - L/hr (gal/hr) 42.8 (11.3) 45.8 (12.1) 48.8 (12.9) Fuel Pressure - kPa (lb/in) 20.7 (3) - 41.4 (6) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 21.5 (0.848) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 17.1 (0.675) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - mH20 (in H20) 0.8 (31)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - m (ft) 1.4 (4.5) Fuel Filter Micron Size 5
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 230 (+5%, -10%) 115 (+5%, -10%) Part Number [C122192] [C122188]
Air System 2100 2350 2600 Combustion Air Flow - m/min (ft./min) 4.4 (155) 4.7 (166) 5.3 (186) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - kPa (in H20) 2.5 (10) 2.5 (10)
Clean Air Cleaner - kPa (in H20) 1.2 (5) 1.2 (5) Maximum Allowable Temperature (Air To Engine Inlet) - C (F)[4] 54.4 (130)
Lubrication System Oil Pressure - normal - kPa (lb/in) 241 (35) - 345 (50) Low Oil Pressure Alarm Switch - kPa (lb/in) 138 (20) In Pan Oil Temperature - C (F) 104 (220) - 118 (245) Total Oil Capacity with Filter - L (qt) 14.7 (15.5)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 240V (+5%, -10%) 120V (+5%, -10%) Part Number C04431 C04430
Performance 2100 2350 2600 BMEP - kPa (lb/in) 483 (70) 462 (67) 448 (65) Piston Speed - m/min (ft/min) 533 (1750) 597 (1958) 661 (2167) Mechanical Noise - dB(A) @ 1m C13906 Power Curve C131934 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2U131219 Rev B
MD 27FEB12
JU4H-UF14
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - in (mm) 4.19 (106) X 5 (127) Displacement - in (L) 275 (4.5) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D534 Weight - lb (kg) 910 (413)
Power Rating 2350 2600 2800 3000 Nameplate Power - HP (kW) 55 (41) 59 (44) 70 (52) 71 (53)
Cooling System - [C051128] 2350 2600 2800 3000 Engine Coolant Heat - Btu/sec (kW) 30 (31.7) 32 (33.8) 34 (35.9) 36 (38) Engine Radiated Heat - Btu/sec (kW) 12 (12.7) 13 (13.7) 14 (14.8) 15 (15.8) Heat Exchanger Minimum Flow
60F (15C) Raw H20 - gal/min (L/min) 8 (30.3) 9 (34.1) 10 (37.9) 11 (41.6)
95F (35C) Raw H20 - gal/min (L/min) 10 (37.9) 11 (41.6) 12 (45.4) 13 (49.2) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - psi (bar) 60 (4.1)
Flow - gal/min (L/min) 40 (151) Typical Engine H20 Operating Temp - F (C)[1] 170 (76.7) - 190 (87.8) Thermostat
Start to Open - F (C) 170 (76.7)
Fully Opened - F (C) 190 (87.8) Engine Coolant Capacity - qt (L) 14.79 (14) Coolant Pressure Cap - lb/in (kPa) 10 (68.9) Maximum Engine Coolant Temperature - F (C) 200 (93.3) Minimum Engine Coolant Temperature - F (C) 160 (71.1) High Coolant Temp Alarm Switch - F (C) 205 (96.1)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 32F (0C)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ 0F (-18C) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-120 in. Circuit Length[2] 00 00
121-160 in. Circuit Length [2] 000 000 161-200 in. Circuit Length [2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C07639] 40 [C071048] Starter Cranking Amps, Rolling - @60F (15C) 345 [RE59595/RE59589] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF14
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 2350 2600 2800 3000 Exhaust Flow - ft./min (m/min) 469 (13.3) 531 (15) 581 (16.5) 630 (17.8) Exhaust Temperature - F (C) 1083 (584) 1055 (568) 1033 (556) 1010 (543) Maximum Allowable Back Pressure - in H20 (kPa) 30 (7.5) 30 (7.5) 30 (7.5) 30 (7.5) Minimum Exhaust Pipe Dia. - in (mm)[3] 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2)
Fuel System 2350 2600 2800 3000 Fuel Consumption - gal/hr (L/hr) 3.1 (11.7) 3.4 (12.9) 3.6 (13.6) 3.9 (14.8) Fuel Return - gal/hr (L/hr) 9 (34.1) 9.5 (36) 9.9 (37.5) 10.3 (39) Fuel Supply - gal/hr (L/hr) 12.1 (45.8) 12.9 (48.8) 13.5 (51.1) 14.2 (53.7) Fuel Pressure - lb/in (kPa) 3 (20.7) - 6 (41.4) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.848 (21.5) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.675 (17.1) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - in H20 (mH20) 31 (0.8)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - ft (m) 4.5 (1.4) Fuel Filter Micron Size 2
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 115 (+5%, -10%) 230 (+5%, -10%) Part Number [C122188] [C122192]
Air System 2350 2600 2800 3000 Combustion Air Flow - ft./min (m/min) 166 (4.7) 186 (5.3) 202 (5.7) 218 (6.2) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - in H20 (kPa) 10 (2.5) 10 (2.5)
Clean Air Cleaner - in H20 (kPa) 5 (1.2) 5 (1.2) Maximum Allowable Temperature (Air To Engine Inlet) - F (C)[4] 130 (54.4)
Lubrication System Oil Pressure - normal - lb/in (kPa) 50 (345) - 95 (655) Low Oil Pressure Alarm Switch - lb/in (kPa) 20 (138) In Pan Oil Temperature - F (C) 220 (104) - 245 (118) Total Oil Capacity with Filter - qt (L) 15.5 (14.7)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 120V (+5%, -10%) 240V (+5%, -10%) Part Number C04430 C04431
Performance 2350 2600 2800 3000 BMEP - lb/in (kPa) 67 (462) 65 (448) 72 (496) 68 (469) Piston Speed - ft/min (m/min) 1958 (597) 2167 (661) 2333 (711) 2500 (762) Mechanical Noise - dB(A) @ 1m C131536 Power Curve C131943 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2C131262 Rev I
MD 12FEB12
JU4H-UF14
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - mm (in) 106 (4.19) X 127 (5) Displacement - L (in) 4.5 (275) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D545 Weight - kg (lb) 413 (910)
Power Rating 2350 2600 2800 3000 Nameplate Power - kW (HP) 41 (55) 44 (59) 52 (70) 53 (71)
Cooling System - [C051001] 2350 2600 2800 3000 Engine Coolant Heat - kW (Btu/sec) 31.7 (30) 33.8 (32) 35.9 (34) 38 (36) Engine Radiated Heat - kW (Btu/sec) 12.7 (12) 13.7 (13) 14.8 (14) 15.8 (15) Heat Exchanger Minimum Flow
15C (60F) Raw H20 - L/min (gal/min) 30.3 (8) 34.1 (9) 37.9 (10) 41.6 (11)
35C (95F) Raw H20 - L/min (gal/min) 37.9 (10) 41.6 (11) 45.4 (12) 49.2 (13) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - bar (psi) 4.1 (60)
Flow - L/min (gal/min) 98.4 (26) Typical Engine H20 Operating Temp - C (F)[1] 76.7 (170) - 87.8 (190) Thermostat
Start to Open - C (F) 76.7 (170)
Fully Opened - C (F) 87.8 (190) Engine Coolant Capacity - L (qt) 14 (14.79) Coolant Pressure Cap - kPa (lb/in) 68.9 (10) Maximum Engine Coolant Temperature - C (F) 93.3 (200) Minimum Engine Coolant Temperature - C (F) 71.1 (160) High Coolant Temp Alarm Switch - C (F) 96.1 (205)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 0C (32F)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ -18C (0F) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-3.1m Circuit Length[2] 00 00
3.1m-4.1m Circuit Length[2] 000 000 4.1m-5.1m Circuit Length[2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C071363] 55 [C071366] Starter Cranking Amps, Rolling - @15C (60F) 225 [C07888/C07889] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF14
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 2350 2600 2800 3000 Exhaust Flow - m/min (ft./min) 13.3 (469) 15 (531) 16.5 (581) 17.8 (630) Exhaust Temperature - C (F) 584 (1083) 568 (1055) 556 (1033) 543 (1010) Maximum Allowable Back Pressure - kPa (in H20) 7.5 (30) 7.5 (30) 7.5 (30) 7.5 (30) Minimum Exhaust Pipe Dia. - mm (in) [3] 76.2 (3) 76.2 (3) 76.2 (3) 76.2 (3)
Fuel System 2350 2600 2800 3000 Fuel Consumption - L/hr (gal/hr) 11.7 (3.1) 12.9 (3.4) 13.6 (3.6) 14.8 (3.9) Fuel Return - L/hr (gal/hr) 34.1 (9) 36 (9.5) 37.5 (9.9) 39 (10.3) Fuel Supply - L/hr (gal/hr) 45.8 (12.1) 48.8 (12.9) 51.1 (13.5) 53.7 (14.2) Fuel Pressure - kPa (lb/in) 20.7 (3) - 41.4 (6) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 21.5 (0.848) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 17.1 (0.675) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - mH20 (in H20) 0.8 (31)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - m (ft) 1.4 (4.5) Fuel Filter Micron Size 2
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 230 (+5%, -10%) 115 (+5%, -10%) Part Number [C122192] [C122188]
Air System 2350 2600 2800 3000 Combustion Air Flow - m/min (ft./min) 4.7 (166) 5.3 (186) 5.7 (202) 6.2 (218) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - kPa (in H20) 2.5 (10) 2.5 (10)
Clean Air Cleaner - kPa (in H20) 1.2 (5) 1.2 (5) Maximum Allowable Temperature (Air To Engine Inlet) - C (F)[4] 54.4 (130)
Lubrication System Oil Pressure - normal - kPa (lb/in) 345 (50) - 655 (95) Low Oil Pressure Alarm Switch - kPa (lb/in) 138 (20) In Pan Oil Temperature - C (F) 104 (220) - 118 (245) Total Oil Capacity with Filter - L (qt) 14.7 (15.5)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 240V (+5%, -10%) 120V (+5%, -10%) Part Number C04431 C04430
Performance 2350 2600 2800 3000 BMEP - kPa (lb/in) 462 (67) 448 (65) 496 (72) 469 (68) Piston Speed - m/min (ft/min) 597 (1958) 661 (2167) 711 (2333) 762 (2500) Mechanical Noise - dB(A) @ 1m C131536 Power Curve C131943 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2C131263 Rev J
MD 24FEB12
JU4H-UF20
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - in (mm) 4.19 (106) X 5 (127) Displacement - in (L) 275 (4.5) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D534 Weight - lb (kg) 910 (413)
Power Rating 1760 2100 2350 Nameplate Power - HP (kW) 60 (45) 67 (50) 72 (54)
Cooling System - [C051128] 1760 2100 2350 Engine Coolant Heat - Btu/sec (kW) 19 (20) 28 (29.5) 40 (42.2) Engine Radiated Heat - Btu/sec (kW) 13 (13.7) 15 (15.8) 16 (16.9) Heat Exchanger Minimum Flow
60F (15C) Raw H20 - gal/min (L/min) 6 (22.7) 7 (26.5) 8 (30.3)
95F (35C) Raw H20 - gal/min (L/min) 8 (30.3) 9 (34.1) 10 (37.9) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - psi (bar) 60 (4.1)
Flow - gal/min (L/min) 40 (151) Typical Engine H20 Operating Temp - F (C)[1] 180 (82.2) - 195 (90.6) Thermostat
Start to Open - F (C) 187 (86.1)
Fully Opened - F (C) 196 (91.1) Engine Coolant Capacity - qt (L) 14.79 (14) Coolant Pressure Cap - lb/in (kPa) 10 (68.9) Maximum Engine Coolant Temperature - F (C) 200 (93.3) Minimum Engine Coolant Temperature - F (C) 160 (71.1) High Coolant Temp Alarm Switch - F (C) 205 (96.1)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 32F (0C)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ 0F (-18C) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-120 in. Circuit Length[2] 00 00
121-160 in. Circuit Length [2] 000 000 161-200 in. Circuit Length [2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C07639] 40 [C071048] Starter Cranking Amps, Rolling - @60F (15C) 345 [RE59595/RE59589] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF20
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 1760 2100 2350 Exhaust Flow - ft./min (m/min) 379 (10.7) 415 (11.8) 469 (13.3) Exhaust Temperature - F (C) 1021 (549) 1016 (547) 1076 (580) Maximum Allowable Back Pressure - in H20 (kPa) 30 (7.5) 30 (7.5) 30 (7.5) Minimum Exhaust Pipe Dia. - in (mm)[3] 3 (76.2) 3 (76.2) 3 (76.2)
Fuel System 1760 2100 2350 Fuel Consumption - gal/hr (L/hr) 3.8 (14.4) 5.3 (20.1) 5.6 (21.2) Fuel Return - gal/hr (L/hr) 7.9 (29.9) 8.5 (32.2) 9 (34.1) Fuel Supply - gal/hr (L/hr) 11.7 (44.3) 13.8 (52.2) 14.6 (55.3) Fuel Pressure - lb/in (kPa) 3 (20.7) - 6 (41.4) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.848 (21.5) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.675 (17.1) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - in H20 (mH20) 31 (0.8)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - ft (m) 4.5 (1.4) Fuel Filter Micron Size 5
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 115 (+5%, -10%) 230 (+5%, -10%) Part Number [C122188] [C122192]
Air System 1760 2100 2350 Combustion Air Flow - ft./min (m/min) 140 (4) 155 (4.4) 166 (4.7) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - in H20 (kPa) 10 (2.5) 10 (2.5)
Clean Air Cleaner - in H20 (kPa) 5 (1.2) 5 (1.2) Maximum Allowable Temperature (Air To Engine Inlet) - F (C)[4] 130 (54.4)
Lubrication System Oil Pressure - normal - lb/in (kPa) 35 (241) - 50 (345) Low Oil Pressure Alarm Switch - lb/in (kPa) 20 (138) In Pan Oil Temperature - F (C) 220 (104) - 245 (118) Total Oil Capacity with Filter - qt (L) 15.5 (14.7)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 120V (+5%, -10%) 240V (+5%, -10%) Part Number C04430 C04431
Performance 1760 2100 2350 BMEP - lb/in (kPa) 98 (676) 92 (634) 88 (607) Piston Speed - ft/min (m/min) 1467 (447) 1750 (533) 1958 (597) Mechanical Noise - dB(A) @ 1m C13907 Power Curve C13476 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2C13611 Rev LMD 12FEB12
JU4H-UF20
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - mm (in) 106 (4.19) X 127 (5) Displacement - L (in) 4.5 (275) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D545 Weight - kg (lb) 413 (910)
Power Rating 1760 2100 2350 Nameplate Power - kW (HP) 45 (60) 50 (67) 54 (72)
Cooling System - [C051001] 1760 2100 2350 Engine Coolant Heat - kW (Btu/sec) 20 (19) 29.5 (28) 42.2 (40) Engine Radiated Heat - kW (Btu/sec) 13.7 (13) 15.8 (15) 16.9 (16) Heat Exchanger Minimum Flow
15C (60F) Raw H20 - L/min (gal/min) 15.1 (4) 22.7 (6) 30.3 (8)
35C (95F) Raw H20 - L/min (gal/min) 22.7 (6) 30.3 (8) 37.9 (10) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - bar (psi) 4.1 (60)
Flow - L/min (gal/min) 98.4 (26) Typical Engine H20 Operating Temp - C (F)[1] 82.2 (180) - 90.6 (195) Thermostat
Start to Open - C (F) 86.1 (187)
Fully Opened - C (F) 91.1 (196) Engine Coolant Capacity - L (qt) 14 (14.79) Coolant Pressure Cap - kPa (lb/in) 68.9 (10) Maximum Engine Coolant Temperature - C (F) 93.3 (200) Minimum Engine Coolant Temperature - C (F) 71.1 (160) High Coolant Temp Alarm Switch - C (F) 96.1 (205)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 0C (32F)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ -18C (0F) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-3.1m Circuit Length[2] 00 00
3.1m-4.1m Circuit Length[2] 000 000 4.1m-5.1m Circuit Length[2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C071363] 55 [C071366] Starter Cranking Amps, Rolling - @15C (60F) 225 [C07888/C07889] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF20
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 1760 2100 2350 Exhaust Flow - m/min (ft./min) 10.7 (379) 11.8 (415) 13.3 (469) Exhaust Temperature - C (F) 549 (1021) 547 (1016) 580 (1076) Maximum Allowable Back Pressure - kPa (in H20) 7.5 (30) 7.5 (30) 7.5 (30) Minimum Exhaust Pipe Dia. - mm (in) [3] 76.2 (3) 76.2 (3) 76.2 (3)
Fuel System 1760 2100 2350 Fuel Consumption - L/hr (gal/hr) 14.4 (3.8) 20.1 (5.3) 21.2 (5.6) Fuel Return - L/hr (gal/hr) 29.9 (7.9) 32.2 (8.5) 34.1 (9) Fuel Supply - L/hr (gal/hr) 44.3 (11.7) 52.2 (13.8) 55.3 (14.6) Fuel Pressure - kPa (lb/in) 20.7 (3) - 41.4 (6) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 21.5 (0.848) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 17.1 (0.675) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - mH20 (in H20) 0.8 (31)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - m (ft) 1.4 (4.5) Fuel Filter Micron Size 5
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 230 (+5%, -10%) 115 (+5%, -10%) Part Number [C122192] [C122188]
Air System 1760 2100 2350 Combustion Air Flow - m/min (ft./min) 4 (140) 4.4 (155) 4.7 (166) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - kPa (in H20) 2.5 (10) 2.5 (10)
Clean Air Cleaner - kPa (in H20) 1.2 (5) 1.2 (5) Maximum Allowable Temperature (Air To Engine Inlet) - C (F)[4] 54.4 (130)
Lubrication System Oil Pressure - normal - kPa (lb/in) 241 (35) - 345 (50) Low Oil Pressure Alarm Switch - kPa (lb/in) 138 (20) In Pan Oil Temperature - C (F) 104 (220) - 118 (245) Total Oil Capacity with Filter - L (qt) 14.7 (15.5)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 240V (+5%, -10%) 120V (+5%, -10%) Part Number C04431 C04430
Performance 1760 2100 2350 BMEP - kPa (lb/in) 676 (98) 634 (92) 607 (88) Piston Speed - m/min (ft/min) 447 (1467) 533 (1750) 597 (1958) Mechanical Noise - dB(A) @ 1m C13907 Power Curve C131935 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2C131235 Rev H
MD 27FEB12
JU4H-UF22
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - in (mm) 4.19 (106) X 5 (127) Displacement - in (L) 275 (4.5) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D534 Weight - lb (kg) 910 (413)
Power Rating 2350 2600 Nameplate Power - HP (kW) 72 (54) 75 (56)
Cooling System - [C051128] 2350 2600 Engine Coolant Heat - Btu/sec (kW) 40 (42.2) 42 (44.3) Engine Radiated Heat - Btu/sec (kW) 16 (16.9) 17 (17.9) Heat Exchanger Minimum Flow
60F (15C) Raw H20 - gal/min (L/min) 8 (30.3) 9 (34.1)
95F (35C) Raw H20 - gal/min (L/min) 10 (37.9) 11 (41.6) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - psi (bar) 60 (4.1)
Flow - gal/min (L/min) 40 (151) Typical Engine H20 Operating Temp - F (C)[1] 180 (82.2) - 195 (90.6) Thermostat
Start to Open - F (C) 187 (86.1)
Fully Opened - F (C) 196 (91.1) Engine Coolant Capacity - qt (L) 14.79 (14) Coolant Pressure Cap - lb/in (kPa) 10 (68.9) Maximum Engine Coolant Temperature - F (C) 200 (93.3) Minimum Engine Coolant Temperature - F (C) 160 (71.1) High Coolant Temp Alarm Switch - F (C) 205 (96.1)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 32F (0C)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ 0F (-18C) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-120 in. Circuit Length[2] 00 00
121-160 in. Circuit Length [2] 000 000 161-200 in. Circuit Length [2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C07639] 40 [C071048] Starter Cranking Amps, Rolling - @60F (15C) 345 [RE59595/RE59589] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF22
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 2350 2600 Exhaust Flow - ft./min (m/min) 469 (13.3) 531 (15) Exhaust Temperature - F (C) 1076 (580) 1095 (591) Maximum Allowable Back Pressure - in H20 (kPa) 30 (7.5) 30 (7.5) Minimum Exhaust Pipe Dia. - in (mm)[3] 3 (76.2) 3 (76.2)
Fuel System 2350 2600 Fuel Consumption - gal/hr (L/hr) 5.6 (21.2) 5.8 (22) Fuel Return - gal/hr (L/hr) 9 (34.1) 9.5 (36) Fuel Supply - gal/hr (L/hr) 14.6 (55.3) 15.3 (57.9) Fuel Pressure - lb/in (kPa) 3 (20.7) - 6 (41.4) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.848 (21.5) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - in (mm) 0.675 (17.1) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - in H20 (mH20) 31 (0.8)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - ft (m) 4.5 (1.4) Fuel Filter Micron Size 5
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 115 (+5%, -10%) 230 (+5%, -10%) Part Number [C122188] [C122192]
Air System 2350 2600 Combustion Air Flow - ft./min (m/min) 166 (4.7) 186 (5.3) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - in H20 (kPa) 10 (2.5) 10 (2.5)
Clean Air Cleaner - in H20 (kPa) 5 (1.2) 5 (1.2) Maximum Allowable Temperature (Air To Engine Inlet) - F (C)[4] 130 (54.4)
Lubrication System Oil Pressure - normal - lb/in (kPa) 35 (241) - 50 (345) Low Oil Pressure Alarm Switch - lb/in (kPa) 20 (138) In Pan Oil Temperature - F (C) 220 (104) - 245 (118) Total Oil Capacity with Filter - qt (L) 15.5 (14.7)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 120V (+5%, -10%) 240V (+5%, -10%) Part Number C04430 C04431
Performance 2350 2600 BMEP - lb/in (kPa) 88 (607) 83 (572) Piston Speed - ft/min (m/min) 1958 (597) 2167 (661) Mechanical Noise - dB(A) @ 1m C13908 Power Curve C130561 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2C133689 Rev B
MD 12FEB12
JU4H-UF22
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - mm (in) 106 (4.19) X 127 (5) Displacement - L (in) 4.5 (275) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D545 Weight - kg (lb) 413 (910)
Power Rating 2350 2600 Nameplate Power - kW (HP) 54 (72) 56 (75)
Cooling System - [C051001] 2350 2600 Engine Coolant Heat - kW (Btu/sec) 42.2 (40) 44.3 (42) Engine Radiated Heat - kW (Btu/sec) 16.9 (16) 17.9 (17) Heat Exchanger Minimum Flow
15C (60F) Raw H20 - L/min (gal/min) 30.3 (8) 37.9 (10)
35C (95F) Raw H20 - L/min (gal/min) 37.9 (10) 45.4 (12) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - bar (psi) 4.1 (60)
Flow - L/min (gal/min) 98.4 (26) Typical Engine H20 Operating Temp - C (F)[1] 82.2 (180) - 90.6 (195) Thermostat
Start to Open - C (F) 86.1 (187)
Fully Opened - C (F) 91.1 (196) Engine Coolant Capacity - L (qt) 14 (14.79) Coolant Pressure Cap - kPa (lb/in) 68.9 (10) Maximum Engine Coolant Temperature - C (F) 93.3 (200) Minimum Engine Coolant Temperature - C (F) 71.1 (160) High Coolant Temp Alarm Switch - C (F) 96.1 (205)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 0C (32F)
Voltage (Nominal) 12 [C07633] 24 [C07633]
Qty. Per Battery Bank 1 2 SAE size per J537 8D 8D CCA @ -18C (0F) 1400 1400 Reserve Capacity - Minutes 430 430
Battery Cable Circuit, Max Resistance - ohm 0.0012 0.0012 Battery Cable Minimum Size
0-3.1m Circuit Length[2] 00 00
3.1m-4.1m Circuit Length[2] 000 000 4.1m-5.1m Circuit Length[2] 0000 0000
Charging Alternator Maximum Output - Amp, 40 [C071363] 55 [C071366] Starter Cranking Amps, Rolling - @15C (60F) 225 [C07888/C07889] 250 [C07819/C07820]
NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.
Page 1 of 2
JU4H-UF22
UK ProducedINSTALLATION & OPERATION DATA (I&O Data)
Exhaust System 2350 2600 Exhaust Flow - m/min (ft./min) 13.3 (469) 15 (531) Exhaust Temperature - C (F) 580 (1076) 591 (1095) Maximum Allowable Back Pressure - kPa (in H20) 7.5 (30) 7.5 (30) Minimum Exhaust Pipe Dia. - mm (in) [3] 76.2 (3) 76.2 (3)
Fuel System 2350 2600 Fuel Consumption - L/hr (gal/hr) 21.2 (5.6) 22 (5.8) Fuel Return - L/hr (gal/hr) 34.1 (9) 36 (9.5) Fuel Supply - L/hr (gal/hr) 55.3 (14.6) 57.9 (15.3) Fuel Pressure - kPa (lb/in) 20.7 (3) - 41.4 (6) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 21.5 (0.848) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe
Pipe Outer Diameter - mm (in) 17.1 (0.675) Maximum Allowable Fuel Pump Suction Lift
with clean Filter - mH20 (in H20) 0.8 (31)
Maximum Allowable Fuel Head above Fuel pump, Supply or Return - m (ft) 1.4 (4.5) Fuel Filter Micron Size 5
Heater System Standard Optional Engine Coolant Heater
Wattage (Nominal) 1000 1000 Voltage - AC, 1 Phase 230 (+5%, -10%) 115 (+5%, -10%) Part Number [C122192] [C122188]
Air System 2350 2600 Combustion Air Flow - m/min (ft./min) 4.7 (166) 5.3 (186) Air Cleaner Standard Optional
Part Number [C03749] [C03327] Type Indoor Service Only, Canister,
with Shield Single-Stage Cleaning method Washable Disposable
Air Intake Restriction Maximum LimitDirty Air Cleaner - kPa (in H20) 2.5 (10) 2.5 (10)
Clean Air Cleaner - kPa (in H20) 1.2 (5) 1.2 (5) Maximum Allowable Temperature (Air To Engine Inlet) - C (F)[4] 54.4 (130)
Lubrication System Oil Pressure - normal - kPa (lb/in) 241 (35) - 345 (50) Low Oil Pressure Alarm Switch - kPa (lb/in) 138 (20) In Pan Oil Temperature - C (F) 104 (220) - 118 (245) Total Oil Capacity with Filter - L (qt) 14.7 (15.5)
Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 240V (+5%, -10%) 120V (+5%, -10%) Part Number C04431 C04430
Performance 2350 2600 BMEP - kPa (lb/in) 607 (88) 572 (83) Piston Speed - m/min (ft/min) 597 (1958) 661 (2167) Mechanical Noise - dB(A) @ 1m C13908 Power Curve C131936 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:
minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77F (25C). [ ] indicates component reference part
number.
Page 2 of 2U131217 Rev B
MD 27FEB12
JU4H-UFAB26
USA ProducedINSTALLATION & OPERATION DATA (I&O Data)
Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 4 Bore and Stroke - in (mm) 4.19 (106) X 5 (127) Displacement - in (L) 275 (4.5) Compression Ratio 17.6:1 Valves per cylinder
Intake 1
Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Rotary Pump Firing Order (CW Rotation) 1-3-4-2 Aspiration Natural Charge Air Cooling Type None Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D534 Weight - lb (kg) 910 (413)
Power Rating 2800 Nameplate Power - HP (kW) 80 (60)
Cooling System - [C051128] 2800 Engine Coolant Heat - Btu/sec (kW) 44 (46.4) Engine Radiated Heat - Btu/sec (kW) 18 (19) Heat Exchanger Minimum Flow
60F (15C) Raw H20 - gal/min (L/min) 10 (37.9)
95F (35C) Raw H20 - gal/min (L/min) 12 (45.4) Heat Exchanger Maximum Cooling Raw Water
Inlet Pressure - psi (bar) 60 (4.1)
Flow - gal/min (L/min) 40 (151) Typical Engine H20 Operating Temp - F (C)[1] 170 (76.7) - 190 (87.8) Thermostat
Start to Open - F (C) 170 (76.7)
Fully Opened - F (C) 190 (87.8) Engine Coolant Capacity - qt (L) 15.8 (15) Coolant Pressure Cap - lb/in (kPa) 10 (68.9) Maximum Engine Coolant Temperature - F (C) 200 (93.3) Minimum Engine Coolant Temperature - F (C) 160 (71.1) High Coolant Temp Alarm Switch - F (C) 205 (96.1)
Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 32F (0C)
Voltage (Nominal) 12