Solutions for:
The Refining Industry
2
WhyLewis-Goetz?
SOME OF THE
OUR DECADES OF INDUSTRY EXPERIENCE,
DELIVER SYSTEM ENGINEERED SOLUTIONS FROM THE MOST REPUTABLE MANUFACTURERS, PROVIDE HIGH-PERFORMANCE ALTERNATIVES, REPAIR AND
RECLAMATION SERVICES.
OUR COMMITMENT TO PRODUCT SAFETY AND SUSTAINABILITY THAT REDUCES OUR CUSTOMERS
TOTAL COST OF OWNERSHIP BY INCREASING THE
PRODUCTS LIFESPAN.
OUR PROACTIVE SERVICE WHICH IS
BACKED BY OUR NORTH AMERICAN GEOGRAPHIC FOOTPRINT OF NEARLY
100 LOCATIONS ALLOWS US TO PROVIDE
IMMEDIATE 24/7 ON-SITE DIAGNOSTIC AND PREVENTATIVE SERVICE, LOCAL EMERGENCY
RESPONSE AND FASTER DELIVERY TIMES.
*We have an average sales staff tenure of nine years.
(OR $785K PER CUSTOMER) THE LONG TIME TENURE OF OUR
SPECIALISTSWE HAVE ON STAFF HAVEPROVEN THAT THEY CAN
SOLVE THEIR PROBLEMS BEFORE THEY BECOME EMERGENCIES.
MILLION DOLLARS
WE HAVE DOCUMENTED A SAVINGS TO OUR REFINERY CUSTOMERS OF
WORLD’S LARGESTREFINERIES
TRUST
IN-DEPTH
KNOWLEDGE
PRODUCTS,
AND THEIR APPLICATIONS
TO PROVIDE THEM WITH
UNIQUE
THEIR CONFIDENCE
MARKET ADVANTAGES.
IS ROOTED IN OUR ABILITY TO:
OF OUR
IN THE LAST SEVEN YEARS.You can view specific refinery industry savings by visiting www.Lewis-Goetz.com and using our tool.
24/7
$8.6*
ONE OF THE LARGEST REFINERIES
IN THE U.S. WROTE TO
THANK US
FOR A MASSIVE TURNAROUND AND CAPITAL PROJECT THAT
WE WERE INVOLVED IN.
THE NOTE READ AS FOLLOWS:
We Are Active Members of Top Accredited Associations
We are also ranked as a market leader in Modern Distribution Management:
3
I just wanted to take the time to
thank all of your personnel for the
‘great service’ that we received
during this fall turnaround. Everyone
gave their all (110%) to supply the
needed material and service requested.
I personally and truly appreciate all
of your efforts. It makes my job so
much better/easier. Once again...
thank you!
Lewis-Goetz?
DELIVER SYSTEM ENGINEERED SOLUTIONS FROM THE MOST REPUTABLE MANUFACTURERS, PROVIDE HIGH-PERFORMANCE ALTERNATIVES, REPAIR AND
RECLAMATION SERVICES.
IS ROOTED IN OUR ABILITY TO:
4
Refinery Overview:
Bringing the parts together.
Crude
AtmosphericDistillation
Vacuum Distillation
Utilities
Wastewater
Hydroheater
Isomerization
Tank Farm
Tank Farm
Tank Farm
Tank Farm
Tank Farm
Hydrocracker
Catalytic Reformer
Alkylation
FCC Feed Hydrotreater Fluid Catalytic Cracker
Coker
Refinery overview –Bringing the parts together.
5
Refinery Unit KAG™ CGG™ ALKY-ONE Spiral-wound HDLE Double Jacketed GrafTech 2110* 2120* 2078* 978-C* NA-60*
Atmospheric Distillation
Vacuum Distillation
Hydrocracker
Hydrotreater
Coker
Alkylation
Isomerization
FCC Feed Hydrotreater
Fluid Catalytic Cracker
Catalytic Reformer
Tank Farm
Wastwater
Utilities
*Temperature/Media/Pressure Dependent
Refinery Unit Steam Hose Hydrocarbon Drain Hose Nitrogen Hose Chemical Hose Air Hose Water Hose Rotary
Atmospheric Distillation
Vacuum Distillation
Hydrocracker
Hydrotreater
Coker
Alkylation
Isomerization
FCC Feed Hydrotreater
Fluid Catalytic Cracker
Catalytic Reformer
Tank Farm
Wastwater
Utilities
Products
Gasketing Selection
Hose Selection
Products
6
Lewis-Goetz Offers an Unmatched Suite of Value Added Sealing and Gasket Services
Our gasket and sealing service portfolio is designed to significantly reduce our customers’ total cost of ownership.
Gasket Installation and Application Programs
Laser Marking
Engineering Services
Extensive Turnaround Services
Manufacturing and FabricationCapabilities
Exchanger, Bolted, Joint and StandardFlange Kitting
Vendor ManagedInventory (VMI) Training
Gasket Surveys
CAD Drawing and File Storage
Full Rubber LabTesting Capabilities
Documented Cost Savings
7
Camprofile Gaskets offer the compressibility of a sheet gasket for low sealing stress, the bolt tightness of a
spiral wound gasket, along with the handling ease of a solid metal gasket and its resistance to buckling. They are
designed for the most difficult sealing environments where performance is critical or sealing stresses are low, and
are offered as a high-quality sealing alternative solution for emission control.
Camprofile Gaskets
Style: KAG™
Corrugated Metal Graphite Gaskets are high-performance gaskets for heat exchanger applications. The CMG
molds in place by filling in irregularities of the spaces creating a superior seal. It maintains the seal even in harsh
environments, including hydrocarbons and steam applications. The gasket is ideal where low bolt loads are present
or where high gasket stresses are available. The thin profile is beneficial in areas where flange separation is limited.
The heavy core and pitch frequency results in superior recovery and crush resistance in the most demanding
applications, an economic solution for emission control.
Corrugated Metal Graphite Gaskets
Style: CGG™
The most advanced gasket for Hydrofluoric Acid Service. Five times as much deformation of the barrier pillow,
giving better conformance to the flanges to eliminate flange corrosion. Seals with half the bolt load required by
other gaskets and nearly three times as much gasket seating stress at full bolt loads. Proven Fire-Safe to API 6FB by
Yarmouth Research Lab.
Alky Gaskets
Style: ALKY-ONE
Spiral-wound Gaskets were developed specifically to handle the severe temperatures and pressures found in a
refinery. These gaskets are engineered to be flexible and to recover when confronted with pressure, temperature
fluctuations, bolt stress, relaxation and creep. These gaskets can be used with almost every known corrosive and
toxic media. Spiral-wound Gaskets with an inner ring prevent inward buckling of the winding from entering the
process stream.
Spiral-wound Gaskets
Styles: SRI & SR
Double Jacketed Gaskets offer greater compressibility and resilience than a solid metal gasket due to the enclosed
soft filler. The two piece metal construction also provides extra rigidity allowing for large diameters. Double Jacketed
Gaskets are used on boiler and heat exchanger applications when ample bolting is available to correctly seat the
gasket. They are designed for high pressure and temperature applications.
Double Jacketed Gaskets
Style: 23
Metal Gaskets
Style SRI Spiral-wound gasket constructed with high density >98% purity inhibited grade graphite that extends
slightly above the metal windings and wound with metal filler to a specific pressure setting on the windings to
ensure uniform compression under high load creating a low emission seal without crushing the sealing element.
HDLE Gasket
Style: High Density Low Emission Spiral Wound Gasket
8
Soft Gaskets
From precision pipe threads to large valves and flanges, GRAFOIL® Flexible Graphite create a superior seal.
GRAFOIL® products fill pits, gouges and microscopic irregularities under only moderate bolt loads, leaving no open
spaces – or voids for leak path improvement. Even the most demanding industrial, chemical and petrochemical
sealing applications can benefit from GRAFOIL® products.
Flexible Graphite
Style: GrafTech/GRAFOIL®
Biaxially Oriented gaskets make for a less porous gasket and enhanced compressibility. This process also allows us
to manufacture a gasket with increased bolt load retention, reduced creep and excellent sealability at low stress.
They are specially designed for use in low bolt loaded constructions, and therefore, are extremely suitable for glass,
ceramics and plastic lined or distorted flanges and even flanges with light surface irregularities.
Biaxially Oriented PTFE Sheet with Hollow Glass Microspheres
Style: 2110
Biaxially Oriented gaskets make for a less porous gasket and enhanced compressibility. This process also allows us
to manufacture a gasket with increased bolt load retention, reduced creep and excellent sealability at low stress.
A general purpose grade for sealing applications across the whole pH-range. Particularly suitable for use with
hydrofluoric acid, but not pure hydrogen fluoride. It can be used with alkalis, solvents, fuels, water, steam
and chlorine.
Biaxially Oriented PTFE Sheet with Barium Sulfate Filler
Style: 2120
Made of good quality material based on a blend of aramid and inorganic fibers bonded with high quality
nitrile rubber. General purpose material suitable for use in a wide range of applications, including hot and
cold water, steam, oils, fuels, gases and a wide range of general chemicals.
Compressed NBR/Aramid/Inorganic Fiber Sheet
Style: 978-C
NBR/Aramid fiber is compressed gasket sheet made with all the great features of premium gasket materials without
the cost. Nothing is left out, only the best raw materials are used, without compromise. It exhibits a broad chemical
resistance, excellent cutability and flexibility. NA-60 is recommended for general service gaskets on all machinery
and process piping and equipment.
Compressed NBR/Aramid Fiber Sheet
Style: NA-60
Compressed NBR/Carbon Fiber Sheet Gaskets possess excellent creep resistance and are suitable for use with oils,
fuels and refrigerants. They are a universal grade especially suitable for use under alkaline conditions, with good
steam resistance and can also be used for general service gaskets on all machinery, process piping and equipment.
Compressed NBR/Carbon Fiber Sheet
Style: 2078
9
For all your isolation and hydro requirements! (Isolation blinds are not intended for pressurized services or hydrotest). Unless specified,
isolation blinds are 1/4” to 3/8” carbon steel. Blinds for hydrotest are available with thickness per ASME and API.
Blinds
Style: Paddle and Spectacle
Keeps cold air out and hot air in your furnaces. Full top-to-bottom zipper prevents gapping throughout thermal cycle. Inner and outer
flaps overlap to protect the zipper and D-Ring Buckle keeps outer flap closed. Abrasion-resistant Silica tape protects the top and
bottom hems.
Tube/Coker/Reformer Seals
Blinds/Tube/Coker/Reformer Seals/ Conveyor Solutions
Tube Seal Coker Seals Reformer Seals
Coker belt at a Refinery
We have a variety of conveyor system components and management programs to
meet the needs of your plant. Our primary product offering to the refinery industry
is comprised of heavyweight and lightweight belt (grade I & II as well as specialty
compounds), bucket elevator belt and a variety of accessories including impact
rollers, impact beds, belt cleaners, pulleys, idlers, lagging and chute lining.
We also have conveyor-system service teams throughout the U.S. and Canada that
provide a variety of installation, troubleshooting and preventative maintenance
services. These crews are fully equipped to mobilize and respond to your conveyor
systems needs 24/7.
Conveyor Solutions
10
Hoses
Steam Hose
Goodall “Super Inferno” Steam Hose
Tube: Chlorbutyl Resistant to Blisters & “Popcorning”
Reinforcement: High Tensile Steel Wire Braids Coated to Resist Corrosion & Enhance Adhesion
Cover: Red EPDM Resistant to Heat, Abrasion & Weathering;
Black Lazy Mylar Spiral for Ease of Identification
Suggested Fittings: Crimped Male & Female or Bolt On Clamps with
Male & Female, “Boss Style” Fittings
Temperature Ranges: -40°F to 450°F (-20°C to 232°C)
Working Pressure: 250 psi, 20 to 1 Safety Factor
Applications: Transfer of steam and/or hot water in virtually any application.
Goodall® DuraCrimp® Coupling System
A safe crimping connection for Goodall® steam hoses (Inferno ISO 6134-2A and Super Inferno)
I.D. O.D.Maximum
Working PressureMinimum
Burst PressureMinimum
Bend Radius Weight Standard Length
Nominal
Bore
mm in. mm in. bar psi bar psi mm in. kg/m lb./ft. mm ft.
19.05 0.75 32.26 1.27 17.24 250 344.74 5,000 101.60 4 0.92 0.62 76.20 250
25.40 1 39.37 1.55 17.24 250 344.74 5,000 127 5 1.32 0.89 76.20 250
Goodall® DuraCrimp® is an exclusive and innovative crimping system for the new generation of Goodall®
steam hoses.
DuraCrimp® is an extremely safe and ergonomic coupling system for steam applications. This innovative
solution offers the following advantages:
• Increased safety and reliability
• Cost savings
• Original and innovative ergonomics
• Identifiers with color-coded identification rings and RFID
• Superior compounds
11
Hoses
Steam Hose
Goodall “Dante” Steam Hose
Tube: Robust Chlorbutyl Tube Formulated to Resist Blisters & “Popcorning”
Reinforcement: High Tensile Steel Wire Braids Coated to Resist Corrosion & Enhance Adhesion
Cover: Red Thick High-Grade EPDM Resistant to Heat, Abrasion & Weathering.
Black Spiral for Ease of Identification.
Suggested Fittings: Bolt On Clamps with Male & Female, “Boss Style” Fittings
Temperature Ranges: -40°F to 450°F (-20°C to 232°C)
Working Pressure: 250 psi
Applications: Transfer of steam and/or hot water in virtually any application.
I.D. O.D.Maximum
Working PressureMinimum
Burst PressureMinimum
Bend Radius Weight Standard Length
Nominal
Bore
mm in. mm in. bar psi bar psi mm in. kg/m lb./ft. mm ft.
12.70 0.50 27.69 1.09 17.24 250 172.37 2,500 76.20 3 0.79 0.53 76.20 250
19.05 0.75 33.27 1.31 17.24 250 172.37 2,500 114.30 4.50 0.98 0.66 76.20 250
25.40 1 40.39 1.59 17.24 250 172.37 2,500 127 5 1.28 0.86 76.20 250
31.75 1.25 49.78 1.96 17.24 250 172.37 2,500 152.40 6 1.80 1.21 30.48 100
38.10 1.50 55.12 2.17 17.24 250 172.37 2,500 177.80 7 2.07 1.39 30.48 100
50.80 2 68.58 2.70 17.24 250 172.37 2,500 254 10 2.71 1.82 30.48 100
63.50 2.50 84.33 3.32 17.24 250 172.37 2,500 330.20 13 4.02 2.70 30.48 100
76.20 3 99.06 3.90 17.24 250 172.37 2,500 406.40 16 5.58 3.75 30.48 100
101.60 4 123.70 4.87 17.24 250 172.37 2,500 508 20 6.79 4.56 30.48 100
Goodall “Thermoflex” Steam Hose
Tube: High-Grade Heat Resistant EPDM
Reinforcement: Carbon Steel Wire Braids
Cover: Black High Grade EPDM with Wrap Impression,
Resistant to Heat, Abrasion & Weathering
Suggested Fittings: Bolt On Clamps with Male & Female, “Boss Style” Fittings. Crimped Style Fittings Available for the 3/4 in. Only.
Temperature Ranges: -40ºF to 450ºF (-20°C to 232°C)
Working Pressure: 250 psi
Applications: Transfer of steam and/or hot water.
Nitrogen Gas Hose
I.D. O.D.Maximum
Working PressureMinimum
Burst PressureMinimum
Bend Radius Weight Standard Length
Nominal
Bore
mm in. mm in. bar psi bar psi mm in. kg/m lb./ft. mm ft.
12.70 0.50 25.65 1.01 17.24 250 172.37 2,500 76.20 3 0.55 0.37 76.20 250
19.05 0.75 32.36 1.27 17.24 250 172.37 2,500 101.60 4 0.74 0.50 76.20 250
25.40 1 39.37 1.55 17.24 250 172.37 2,500 127 5 1.03 0.69 76.20 250
38.10 1.50 51.82 2.04 17.24 250 172.37 2,500 177.80 7 1.49 1 30.48 100
50.8 2 66.55 2.62 17.24 250 172.37 2,500 254 10 2.37 1.59 30.48 100
Goodall “Nitro” Nitrogen Hose
Tube: Proprietary PVC/Nitrile (NBR) Blend
Reinforcement: High Tensile, Polyester Yarn
Cover: Blue or Purple Synthetic Weather, Petroleum & Ozone Resistant High
Visibility PVC/Nitrile (NBR) Blend
Suggested Fittings: Swaged, Crimped or Band Clamp Type
Temperature Ranges: -20°F to 150°F (-28ºC to 65ºC)
Working Pressure: 300 psi
Applications: For use in nitrogen service to purge lines in refineries, petrochemical and general industries.
12
Hoses
Nitrogen Hose
I.D. O.D.Maximum
Working Pressure
MinimumWorking Pressure
68ºF, psiMinimum
Bend Radius WeightNumber of Plies
Nominal
Bore
mm in. mm in. bar psi bar psi mm in. kg/m lb./ft.
19.05 0.75 29.97 1.18 20.68 300 82.74 1,200 177.8 7 0.57 0.38 4 4
Hydrocarbon Drain Hose
Goodall “Super Dragon” Hydrocarbon Drain Hose
Tube: Specially Blended Nitrile to Resist Hot Hydrocarbons
Reinforcement: Braided Wire & Synthetic Textile for Strength & Durability
Cover: Blue Hypalon for Heat, Ozone & Chemical Resistance; White Spiral
Stripe for Ease of Identification
Suggested Fittings: Crimped or Clamped Shank Type Couplers (please consult fitting manufacturer for best application)
Temperature Ranges: -40°F to 350°F (-40ºC to 176ºC)
Working Pressure: 500 psi
Applications: The best solution for draining hydrocarbons from tanks, vessels and piping in petrochemical type operations.
5 to 1 safety factor (2,500 psi burst for new assemblies).
I.D. O.D.Maximum
Working PressureMinimum
Burst PressureMinimum
Bend Radius Weight Standard Length
Nominal
Bore
mm in. mm in. bar psi bar psi mm in. kg/m lb./ft. mm ft.
12.70 0.50 25.91 1.02 34.47 500 172.37 2,500 50.80 2 0.62 0.42 76.20 250
19.05 0.75 32 1.26 34.47 500 172.37 2,500 63.50 2.50 0.80 0.54 76.20 250
25.40 1 39.88 1.57 34.47 500 172.37 2,500 76.20 3 1.15 0.77 76.20 250
I.D. O.D.Maximum
Working PressureMinimum
Burst Pressure Vacuum RatingMinimum
Bend Radius Weight Standard Length
Nominal
Bore
mm in. mm in. bar psi bar psi mm in.,HG mm in. kg/m lb./ft. mm ft.
19.05 0.75 34.04 1.34 13.79 200 55.16 800 736.60 29 76.20 3 0.64 0.43 30.48 100
25.40 1 40.39 1.59 13.79 200 55.16 800 736.60 29 101.60 4 0.76 0.51 30.48 100
31.75 1.25 47.75 1.88 13.79 200 55.16 800 736.60 29 127 5 0.94 0.63 30.48 100
38.10 1.50 52.83 2.08 13.79 200 55.16 800 736.60 29 152.40 6 1.09 0.73 30.48 100
50.80 2 66.04 2.60 13.79 200 55.16 800 736.60 29 177.80 7 1.41 0.95 30.48 100
63.50 2.50 81.28 3.20 13.79 200 55.16 800 736.60 29 228.60 9 2.05 1.38 30.48 100
76.20 3 95.25 3.75 13.79 200 55.16 800 736.60 29 254 10 2.65 1.78 30.48 100
101.60 4 121.67 4.79 13.79 200 55.16 800 736.60 29 508 20 3.71 2.49 30.48 100
13
Hoses
Hydrocarbon Drain Hose
Goodall “Blue Dragon” Hydrocarbon Drain Hose
Tube: Specially Blended Neoprene to Resist Hot Hydrocarbons
Reinforcement: Braided Wire & Synthetic Textile for Strength & Durability
Cover: Blue Hypalon for Heat, Ozone & Chemical Resistance; Green Stripe
for Ease of Identification
Suggested Fittings: Crimped or Clamped Shank Type Couplers (please consult fitting
manufacturer for best application)Temperature
Ranges: -40°F to 250°F (-40ºC to 121ºC)
Working Pressure: 300 psi
Applications: A better solution for draining hydrocarbons from tanks, vessels and piping in petrochemical type operations.
5 to 1 safety factor (1,500 psi burst for new assemblies). Also available on request, Green Dragon.
I.D. O.D.Maximum
Working PressureMinimum
Burst PressureMinimum
Bend Radius Weight Standard Length
Nominal
Bore
mm in. mm in. bar psi bar psi mm in. kg/m lb./ft. mm ft.
19.05 0.75 30.48 1.20 20.68 300 103.42 1,500 101.60 4 0.65 0.44 76.20 250
25.40 1 39.88 1.57 20.68 300 103.42 1,500 127 5 1.13 0.76 76.20 250
Chemical Suction & Discharge Hose
Goodall “Super Kemflex ”Chemical Transfer Hose
Tube: Clear Ultra High Molecular Weight Polyethylene (UHMPE)
Reinforcement: High Tensile Textile Braids with Dual Monofilament Plastic Helix & Static Wires
Cover: Abrasion & Ozone Resistant EPDM Standard Green with Yellow Longitudinal Stripe
Suggested Fittings: Cam & Groove, Shank Type, Crimped On
Temperature Ranges: -40ºF to 180ºF (-40ºC to 82ºC)
Working Pressure: 200 psi
Applications: Provides the ultimate in kink and crush resistance, flexibility, ease of handling and performance with aggressive chemicals.
4 to 1 safety factor (800 psi burst for new assemblies).
Your local Lewis-Goetz and ERIKS Canada division stocks a wide variety of this type of product in red, black and green as well as other colors (Titon or Air Hammer) and can cut and couple to your requirements.
14
Hoses
Air & Water Utility Hoses
1. Lewis-Goetz personnel conducts a plant survey of all hose/fitting applications2. Then presents summary of findings and recommendations to all concerned parties3. Implements changes and provides training for all (operations, maintenance and plant contractors)4. Document savings based on engineered changes recommended
Maintenance Management Hose Program
Coking Tower
Rotary and Decoking Hose
Lewis-Goetz has a dedicated Rotary hose manufacturing facility that is certified to API 7K based out of our Houston, TX branch in Pasadena, TX.
Goodall S10000 Super Long Life 2000
Tube: Nitrile Copolymer – highly oil resistant
Reinforcement: Multiple plies of high tensile brass coated steel cables. The textile
carcass is made of multiple plies of high tensile synthetic fabric.
The cushion layers are made of Synthetic Copolymer designed to
add body and provide uniform separation of hose elements to
control twist.
Cover: Neoprene Copolymer designed to resist external environmental
elements and effects of abrasion and cutting commonly found in
decoking operations
Suggested Fittings: Flanges are RTJ ANSI Series 1500# or 2500# (or per customer
requirements). All couplings and flanges are full flow without
restrictions (3 ½” I.D.). In many cases, flanges previously supplied
can be re-used resulting in considerable savings with future hoses
purchased (refurbishing of some flanges may be required). Swivel
fittings are available. Live swivel fittings reduce the twist and
torqueing of a solid connection.
Temperature Ranges: -40°F to +176°F
Certifications: Hydrostatic test to working and test pressure of hose (which will be
chart recorded and measured and measured at working pressure)
Applications: Used in the Decoking units in the refinery process
With the built in Barney coupling available for the Goodall Decoker hose, you do not have to worry about slippage or fitting ejection as you would with a typical swaged end fitting.
*Includes head and sleeve
I.D. O.D.# of
Steel Piles
MaximumWorking Pressure
Minimum Hose Test Pressure
Weightper Foot
Weight/Pair of Couplings*Bend Radius
in. in. psi psiin. lb.lb.
3.5 5.5 2 5,000 55 10,000 14 154
15
Fittings & Accessories
Your local Lewis-Goetz and ERIKS Canada division stocks many different items to meet your exacting needs, some examples are shown below:
Complete Range of Camlocks Dual Lock Couplings
Ground Joint Style Air & Water Styles
Bowe Style Single Lock Whip Checks
16
Valves & Fittings
Gate Valves
1 In. Gate Valve
Stainless
Flanged End
Class 150
2 In. Gate Valve 600RF12SH
Flanged End
Class 600
3 In. Gate Valve 301RF8
Flanged End
Class 300
Forge Steel Gate Valves
Sizes Available: 0.25-2 in.
Conventional Port
Class 800
Glove Valves
Forge Steel OS&Y Globe Valves
Sizes Available: 0.25-2 in.
Class 800
Check Valves
4 In. Check Valve 152RF8
Flanged End
Class 150
2 In. Gate Valve 600RF12SH
Flanged End
Class 600
Forge Steel Gate Valves
Sizes Available: 0.25-2 in.
Conventional Port
Class 800
4 In. Check Valve 152RF8
Flanged End
Class 150
www.lewis-goetz.com
Please Contact Your Local Division for More Information
May 2016
Lewis-Goetz also services the following industries:
• Aggregate
• Agriculture
• Chemical Processing
• Construction
• Food Processing
• Government
• Manufacturing
• Mining
• Oil & Gas
• Package Handling
• Petroleum Dispensing
• Pharmaceutical
• Power Generation
• Pulp and Paper/Wood
• Rental
• Steel
• Tire
• Transport/Bulk Hauling