2.01 CXA
SEZIONI BANCHI BAR REFRIGERAZIONE STATICA CON PIANO MACCHINA CAFFE’STATIC REFRIGERATED BAR COUNTERS WITH COFFEE MACHINE TOP - SECTION VIEWS
CARATTERISTICHE
FEATURES
Prof.70
Refrigerated bar counters are available in the following lengths: 150-200-250-300-350-400 cm, and depth: 70cm.The holding structure is made of tubular steel varnished with epoxy powders at 180°C furnace temperature, with stiffening elements and adjustable feet.The single block case is isolated by ecological polyurethane of 40 km/m3 density Chlorine/Fluorine/Carbide-free, with AISI 304 18/10 2B finishedstainless steel walls and base with rounded corners according to hygiene norms. Outside lateral plastic coated plates. The compartment with doorhas market dimensions (that is: 603 mm, 444 mm). One plastic coated wire grid shelf that can be set on three different levels of each compartment.The cases can be equipped with three different sets of drawers, that is: 1/2x2, 1/3x3, 1/3+2/3.AISI 304 18/10 Scotchbrite finished stainless steel worktop. Stainless steel coffee machine top and box. Refrigerating system constituted byhermetic compressor, condenser with copper pipe and aluminum wings air-cooled by fan, static evaporator with copper pipe and aluminum wingscapillary fed. The compressor is the MBP and HBP (medium and high suctioning pressure) work suitable kind. The system was tested at a 32°C andat a 60% relative humidity environment. The highest condensation dagree reached is 40/42°C the highest suctioning pressure is 2 bars.Every counter is submitted to a refrigerating test and to an electric system test (see the test certification located in the pocket stuck on purpose tothe counter on the worker side).The temperature of the case (+4°C, +8°C) is controlled by an electronic control panel, the defrosting is automatic. A back flow preventing valve waslocated on purpose in the drainage to protect it during the evacuation process of condensed water that take place thanks to it.The Hydraulic System got a water drainage (C) with a 3/8" connection to the single lever tap and was pressure tested in each counter. The sinkwater drainage (A) was realized with a 40mm diameter, high temperature proof pipe, trap provided.The case water drainage (B) got a 1/2" connectionand back flow preventing valve; the condensed water, that comes out of the evaporator defrosting process, conveys there, too.
688
554
951
949
172
11211142
188
720
688
650326
949
172
1121951
188
SEZIONE SU LAVELLODepth 70 - Sink section view
SEZIONE SU VANO UNITA’ CONDENSATRICEDepth 70 - Condenser compartment section view
Prof.70
Banchi bar refrigerati nelle misure 150 - 200 - 250 - 300 - 350 - 400 profondità 70.Struttura portante in tubolare d’acciaio verniciato con polveri epossidiche a forno a 180°C con elementi d’irrigidimento, piediniregolabili.Cella isolata monoblocco con poliuretano ecologico densità 40 Kg/m3 senza gas CFC, con pareti e fondo in acciaio inox AISI 30418/10 finitura 2B con angoli raggiati come da normative igieniche. Fiancate laterali esterne in lamiera plastificata. Vano sportellocon dimensioni commerciali (mm 603, mm 444). Una griglia in filo plastificata posizionabile su tre diversi livelli per ogni vano.Possibilità di dotare le celle di cassetti da 1/2x2, 1/3x3, 1/3+2/3.Piano lavoro in acciaio inox AISI 304 18/10 finitura Scotchbrite. Piano macchina caffè e cassa in acciaio inox.Impianto di refrigerazione costituito da compressore ermetico, condensatore con tubo di rame ed alette d’alluminio raffreddato adaria con ventilatore, evaporatore statico con tubo in rame ed alette d’alluminio alimentato a capillare.Il compressore è del tipo adatto per lavoro a MBP e HBP (media ed alta pressione d’aspirazione). Il sistema è collaudato a 32°Ced al 60% U.R. ambiente. La condensazione raggiunge al massimo i 40/42°C, la pressione di aspirazione max è di due BAR.Ogni banco è sottoposto a collaudo di refrigerazione ed a prova d’impianto elettrico (vedi certificato di collaudo inserito nell’appositatasca in plastica sul banco lato operatore).La temperatura della cella (+4°C, +8°C) è regolata da pannello comandi elettronico, lo sbrinamento è automatico. L’evacuazionedella condensa avviene tramite uno scarico protetto da apposita valvola antiriflusso.L’impianto idraulico è dotato di scarico idrico (C) con attacco da 3/8” per il rubinetto monoleva e collaudato a pressione su ognibanco. Lo scarico idrico del lavello (A) è realizzato in tubo diametro 40 mm. ad alta resistenza termica ed e dotato di tubo a gomito.Lo scarico idrico della cella (B) è dotato di un attacco da 1/2” e valvola antiriflusso; nello stesso è convogliata l’acqua di condensadello sbrinamento dell’evaporatore.
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65512
65570
CXA
BANCHI BAR REFRIGERAZIONE STATICA CON PIANO MACCHINA CAFFE’STATIC REFRIGERATED BAR COUNTERS WITH COFFEE MACHINE TOP
2.02
CELLA NORMALE / Standard number of cases
CELLA MAGGIORATA / Increased number of cases
Detrazione per piano cassa / Cash top price to be deducted
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
SV 1/1 SER 01
GR 001 GR 003 GRX 01
IL 301S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01CAS 1F CAS 1S RUM 2RUM 1 PPG 01 GR 002 UCR BB
ACCESSORI
1500
1000
700
1121
150
CELLA NORMALE / Standard number of cases
2000
500
1500
1010
200
2000
1000
1010
200
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65514
65572
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65524
65582
FITTINGS
Vedi pag. 2.26See page 2.26
A
C
B
500
Schema scarichiDrainages system scheme
2.03 CXA
BANCHI BAR REFRIGERAZIONE STATICA CON PIANO MACCHINA CAFFE’STATIC REFRIGERATED BAR COUNTERS WITH COFFEE MACHINE TOP
2500
500
1500
1010
250 CELLA NORMALE /Standard number of cases
3000
4751121
500
1000
1010
326
367
300 CELLA NORMALE / Standard number of cases
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
SV 1/1 SER 01
GR 001 GR 003 GRX 01
IL 301S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01CAS 1F CAS 1S RUM 2RUM 1 PPG 01 GR 002 UCR BB
2500
1500
1010
250 CELLA MAGGIORATA / Increased number of cases
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65516
65574
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65526
65584
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65519
65577
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
CXA
BANCHI BAR REFRIGERAZIONE STATICA CON PIANO MACCHINA CAFFE’STATIC REFRIGERATED BAR COUNTERS WITH COFFEE MACHINE TOP
2.04
3500
475
500
1500
1010
350 CELLA NORMALE / Standard number of cases
3500
500
1000
1010
350 CELLA MAGGIORATA / Increased number of cases
SV 1/1 SER 01
GR 001 GR 003 GRX 01
IL 301S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01CAS 1F CAS 1S RUM 2RUM 1 PPG 01 GR 002 UCR BB
3000
500
1000
1010
20
300 CELLA MAGGIORATA / Increased number of cases
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65529
65587
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65521
65579
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65531
65589
2.05 CXA
BANCHI BAR REFRIGERAZIONE STATICA CON PIANO MACCHINA CAFFE’STATIC REFRIGERATED BAR COUNTERS WITH COFFEE MACHINE TOP
4000
9751121
2000
500
1010
400 CELLA NORMALE / Standard number of cases
4000
1500
500
475
1010
400 CELLA MAGGIORATA / Increased number of cases
TUTTE LE VERSIONI POSSONO ESSERE FORNITE DX O SX Every version is available both right or left handed
1500
500
ESEMPIO SXEXAMPLE LH
ESEMPIO DXEXAMPLE RH
SV 1/1 SER 01
GR 001 GR 003 GRX 01
IL 301S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01CAS 1F CAS 1S RUM 2RUM 1 PPG 01 GR 002 UCR BB
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
- Detrazione per piano macchina caffè / Coffee machine top price to be deducted
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65523
65581
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65533
65591
688
554
951
949
172
1121
188
720
688
650326
949
172
1121951
188
Prof.70 SEZIONEDepth 70 - Section
SEZIONE SU VANO UNITA’ CONDENSATRICEDepth 70 - Condenser compartment section view
Prof.70
CXA
SEZIONI BANCHI BAR REFRIGERAZIONE STATICA SENZA LAVELLOSTATIC REFRIGERATED BAR COUNTERS WITHOUT SINK - SECTION VIEWS
2.06
CARATTERISTICHE
FEATURES
Refrigerated bar counters are available in the following lengths: 150, 200, 250, 300, 350 and 400 cm.The holding structure is made of tubular steel varnished with epoxy powders at 180°C furnace temperature, with stiffening elements and adjustable feet.The single block case is isolated by ecological polyurethane of 40 km/m3 density Chlorine/Fluorine/Carbide-free, with AISI 304 18/10 2B finishedstainless steel walls and base with rounded corners according to hygiene norms. Outside lateral plastic coated plates. The compartment with doorhas market dimensions (that is: 603 mm, 444 mm). One plastic coated wire grid shelf that can be set on three different levels of each compartment.The cases can be equipped with three different sets of drawers, that is: 1/2x2, 1/3x3, 1/3+2/3.AISI 304 18/10 Scotchbrite finished stainless steel worktop. Stainless steel coffee machine top and box. Refrigerating system constituted byhermetic compressor, condenser with copper pipe and aluminum wings air-cooled by fan, static evaporator with copper pipe and aluminum wingscapillary fed. The compressor is the MBP and HBP (medium and high suctioning pressure) work suitable kind. The system was tested at a 32°C andat a 60% relative humidity environment. The highest condensation dagree reached is 40/42°C the highest suctioning pressure is 2 bars.Every counter is submitted to a refrigerating test and to an electric system test (see the test certification located in the pocket stuck on purpose tothe counter on the worker side).The temperature of the case (+4°C, +8°C) is controlled by an electronic control panel, the defrosting is automatic. A back flow preventing valve waslocated on purpose in the drainage to protect it during the evacuation process of condensed water that take place thanks to it.The case water drainage (B) got a 1/2" connection and back flow preventing valve; the condensed water, that comes out of the evaporator defrostingprocess, conveys there, too.
Banchi bar refrigerati disponibili nelle misure 150, 200, 250, 300, 350 e 400 cm.Struttura portante in tubolare d’acciaio verniciato con polveri epossidiche a forno a 180°C con elementi d’irrigidimento, piediniregolabili.Cella isolata monoblocco con poliuretano ecologico densità 40 Kg/m3 senza gas CFC, con pareti e fondo in acciaio inox AISI 30418/10 finitura 2B con angoli raggiati come da normative igieniche. Fiancate laterali esterne in lamiera plastificata. Vano sportellocon dimensioni commerciali (mm 603, mm 444). Una griglia in filo plastificata posizionabile su tre diversi livelli per ogni vano.Possibilità di dotare le celle di cassetti da 1/2x2, 1/3x3, 1/3+2/3.Piano lavoro in acciaio inox AISI 304 18/10 finitura Scotchbrite. Piano macchina caffè e cassa in acciaio inox.Impianto di refrigerazione costituito da compressore ermetico, condensatore con tubo di rame ed alette d’alluminio raffreddato adaria con ventilatore, evaporatore statico con tubo in rame ed alette d’alluminio alimentato a capillare.Il compressore è del tipo adatto per lavoro a MBP e HBP (media ed alta pressione d’aspirazione). Il sistema è collaudato a 32°Ced al 60% U.R. ambiente. La condensazione raggiunge al massimo i 40/42°C, la pressione di aspirazione max è di due BAR.Ogni banco è sottoposto a collaudo di refrigerazione ed a prova d’impianto elettrico (vedi certificato di collaudo inserito nell’appositatasca in plastica sul banco lato operatore).La temperatura della cella (+4°C, +8°C) è regolata da pannello comandi elettronico, lo sbrinamento è automatico. L’evacuazionedella condensa avviene tramite uno scarico protetto da apposita valvola antiriflusso.Lo scarico idrico della cella (B) è dotato di un attacco da 1/2” e valvola antiriflusso; nello stesso è convogliata l’acqua di condensa
dello sbrinamento dell’evaporatore.
2.07 CXA
BANCHI BAR REFRIGERAZIONE STATICA SENZA LAVELLOSTATIC REFRIGERATED BAR COUNTERS WITHOUT SINK
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65652
65630
CELLA NORMALE / Standard number of cases
CELLA MAGGIORATA / Increased number of cases
SV 1/1 SER 01
GR 001 GR 003 GRX 01
IL 301S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01CAS 1F CAS 1S PPG 01 GR 002 UCR BBPC 01PMC 01
ACCESSORI
1500
1000
1121
150
CELLA NORMALE / Standard number of cases
2000
500
1500
200
2000
1000
200
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65654
65632
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65664
65642
FITTINGS
Vedi pag. 2.26See page 2.26
CXA
BANCHI BAR REFRIGERAZIONE STATICA SENZA LAVELLOSTATIC REFRIGERATED BAR COUNTERS WITHOUT SINK
2.08
2500
500
1500
250 CELLA NORMALE /Standard number of cases
3000
4751121
500
1000
326
367
300 CELLA NORMALE / Standard number of cases
SV 1/1 SER 01
GR 001 GR 003 GRX 01
IL 301S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01CAS 1F CAS 1S PPG 01 GR 002 UCR BBPC 01PMC 01
2500
1500
250 CELLA MAGGIORATA / Increased number of cases
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65656
65634
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65666
65644
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65659
65637
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
2.09 CXA
BANCHI BAR REFRIGERAZIONE STATICA SENZA LAVELLOSTATIC REFRIGERATED BAR COUNTERS WITHOUT SINK
3500
475
500
1500
350 CELLA NORMALE / Standard number of cases
3500
500
1000
350 CELLA MAGGIORATA / Increased number of cases
SV 1/1 SER 01
GR 001 GR 003 GRX 01
IL 301S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01CAS 1F CAS 1S PPG 01 GR 002 UCR BBPC 01PMC 01
3000
500
1000
300 CELLA MAGGIORATA / Increased number of cases
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65669
65647
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65661
65639
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65671
65649
CXA
BANCHI BAR REFRIGERAZIONE STATICA SENZA LAVELLOSTATIC REFRIGERATED BAR COUNTERS WITHOUT SINK
2.10
4000
9751121
2000
500
400 CELLA NORMALE / Standard number of cases
4000
1500
500
475
400 CELLA MAGGIORATA / Increased number of cases
SV 1/1 SER 01
GR 001 GR 003 GRX 01
IL 301S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01CAS 1F CAS 1S PPG 01 GR 002 UCR BBPC 01PMC 01
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65663
65641
Con unità condensatrice
With condenser unit
Senza unità condensatrice
Without condenser unit
Cod.
65673
65651
2BANCHI BAR REFRIGERAZIONEVENTILATA E NEUTRINeutral and ventilated refrigerated bar counters
DSL - Divisione della IFI S.p.A. - Strada Selva Grossa, 28/30 - 61010 Tavullia (PU) - Italy Tel. (+39)0721.200251 - Fax (+39)0721.201847 - www.dsl-technology.it - [email protected]
Banc
hi b
ar re
frige
razi
one
vent
ilata
e n
eutri
Neut
ral a
nd v
entil
ated
refri
gera
ted
bar c
ount
ers
2.13 CXA
LOGICA DI LETTURACATALOGUE TERMINOLOGY GUIDE
500
2500
975
2500
CELLA NORMALE
Standard number of casesCELLA NORMALE SENZA UNITA’ CONDENSATRICE
Standard case number unit without condenser unit
2500
475
2500
CELLA MAGGIORATA DI 1 VANO
1 more case increased unit
2500
TUTTA CELLA SENZA UNITA’ CONDENSATRICE
Full case unit without condenser unit
TUTTE LE VERSIONI POSSONO ESSERE FORNITE DX O SXEvery version is available right or left handed
CELLA MAGGIORATA DI 1 VANO SENZA UNITA’ CONDENSATRICE
1 more case increased unit without condenser unit
ESEMPIO DXEXAMPLE RH
ESEMPIO SXEXAMPLE LH
500 500
2500 2500
CXA
BANCHI BAR: ESEMPI DI COMPOSIZIONEBAR COUNTER: POSITIONING EXAMPLES
2.14
4570
2009
2109
4218
2943
3855
2109
2109
2.15 CXA
SEZIONI BANCHI BAR REFRIGERAZIONE VENTILATA CON LAVELLOVENTILATED REFRIGERATED BAR COUNTERS WITH SINK - SECTION VIEWS
689
554
949
172
1131
188
951700
43 123
22310
689
650326
949
172
1131
188
951
43 123
22310
Prof.70 SEZIONE SU LAVELLODepth 70 - Sink section view
SEZIONE SU VANO UNITA’ CONDENSATRICEDepth 70 - Condenser compartment section view
Prof.70
CARATTERISTICHE
FEATURES
Banchi bar refrigerati nelle misure 150 - 200 - 250 - 300 - 350 - 400- 450 profondità 70.Struttura portante in tubolare d’acciaio verniciato con polveri epossidiche a forno a 180° C con elementi d’irrigidimento, piediniregolabili.Cella isolata monoblocco con poliuretano ecologico densità 40 Kg/m3 senza gas CFC, con pareti e fondo in acciaio inox AISI 30418/10 finitura 2B con angoli raggiati come da normative igieniche. Fiancate laterali esterne in lamiera plastificata. Vano sportellocon dimensioni commerciali (mm 603, mm 444). Una griglia in filo plastificata posizionabile su tre diversi livelli per ogni vano.Possibilità di dotare le celle di cassetti da 1/2x2, 1/3x3, 1/3+2/3.Piano lavoro in acciaio inox AISI 304 18/10 finitura Scotchbrite.Impianto di refrigerazione costituito da compressore ermetico, condensatore con tubo di rame ed alette d’alluminio raffreddato adaria con ventilatore, evaporatore ventilato con tubo in rame ed alette d’alluminio alimentato a capillare.Il compressore è del tipo adatto per lavoro a MBP e HBP (media ed alta pressione d’aspirazione). Il sistema è collaudato a 32°Ced al 60% U.R. ambiente. La condensazione raggiunge al massimo i 40/42°C, la pressione di aspirazione max è di due BAR.Ogni banco è sottoposto a collaudo di refrigerazione ed a prova d’impianto elettrico (vedi certificato di collaudo inserito nell’appositatasca in plastica sul banco lato operatore).La temperatura della cella (+3°C, +8°C) è regolata da pannello comandi elettronico, lo sbrinamento è automatico.L’evacuazione della condensa avviene tramite uno scarico protetto da apposita valvola antiriflusso.L’impianto idraulico è dotato di scarico idrico (C) con attacco da 3/8” per il rubinetto monoleva e collaudato a pressione su ognibanco. Lo scarico idrico del lavello (A) è realizzato in tubo diametro 40 mm. ad alta resistenza termica ed e dotato di tubo a gomito.Lo scarico idrico della cella (B) è dotato di un attacco da 1/2” e valvola antiriflusso; nello stesso è convogliata l’acqua di condensadello sbrinamento dell’evaporatore.
Refrigerated bar counters are available in the following lengths: 150-200-250-300-350-400-450 cm and depth: 70cm.The holding structure is made of tubular steel varnished with epoxy powders at 180°C furnace temperature, with stiffening elements and adjustablefeet.The single block case is isolated by ecological polyurethane of 40 kg/m3 density Chlorine/Fluorine/Carbide-free, with AISI 304 18/10 2B finishedstainless steel walls and base with rounded corners according to hygiene norms. Outside lateral plastic coated plates. The compartment with doorhas market dimensions (that is: 603 mm, 444 mm). One plastic coated wire grid shelf that can be set on three different levels of each compartment.The cases can be equipped with three different sets of drawers, that is: 1/2x2, 1/3x3, 1/3+2/3. AISI 304 18/10 Scotchbrite finished stainless steelworktop. Refrigerating system constituted by hermetic compressor, condenser with copper pipe and aluminum wings air-cooled by fan, ventilatedevaporator with copper pipe and aluminum wings capillary fed.The compressor is the MBP and HBP (medium and high suctioning pressure) work suitable kind. The system was tested at a 32°C and at a 60%relative humidity environment. The highest condensation degree reached is 40/42°C, the highest suctioning pressure is 2 bars.Every counter is submitted to a refrigerating test and to an electric system test (see the test certification located in the pocket stuck on purpose tothe counter on the worker side).The case temperature (+3°C, +8°C) can be regulated by an electronic switchboard and the defrosting system is automatic. A back flow preventingvalve was located on purpose in the drainage to protect it during the evacuation process of condensed water that take place thanks to it.The Hydraulic System got a water drainage (C) with a 3/8" to the single lever tap connection and was pressure tested in each counter. The sinkwater drainage (A) was realized with a 40 mm diameter, high temperature proof pipe, trap provided. The case water drainage (B) got a 1/2"connection and back flow preventing valve; the condensed water, that comes out of the evaporator defrosting process, conveys there, too.
CXA
BANCHI BAR CON LAVELLOBAR COUNTERS WITH SINKS
2.16
2000
500
500
1500
500
2500
500
500
326
367
150
200
250
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
65002
65009
65004
65011
65015
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
65017
65024
65019
65026
65030
ATTENZIONE: i disegni sotto riportati si riferiscono alla versione cella normaleAttention: the pictures underneath show standard number of cases
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cod.
64992
64993
64994
SV 1/1 SER 01
GR 001 GR 003 GRX 01AG 101
S 1/1
TRG 01
C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01PC 01PMC 01CAS 1F CAS 1S
RUM 2
RUM 1
GR 002
S 2/2
UCR BBGP 501CAR 06PGR 04 PGR 06PGR 02
IL 301
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
A
C
B
500
Schema scarichiDrainages system scheme
2.17 CXA
BANCHI BAR CON LAVELLOBAR COUNTERS WITH SINKS
3000
500
475
1000
300
SV 1/1 SER 01
GR 001 GR 003 GRX 01AG 101
S 1/1
TRG 01
C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01PC 01PMC 01CAS 1F CAS 1S
RUM 2
RUM 1
GR 002
S 2/2
UCR BBGP 501CAR 06PGR 04 PGR 06PGR 02
IL 301
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Cella maggiorata di 2 vani2 more case increased unit
Cella maggiorata di 2 vanisenza unità condensatrice
2 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
65032
65039
65034
65041
63000
63002
63004
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Cella maggiorata di 2 vani2 more case increased unit
Cella maggiorata di 2 vanisenza unità condensatrice
2 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
65045
65052
65047
65054
63005
63007
63009
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Cella maggiorata di 2 vani2 more case increased unit
Cella maggiorata di 2 vanisenza unità condensatrice
2 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
65059
65066
65061
65068
63010
63012
63014
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
3500
500
475
2000
350
4000
500
475
2000
400
CXA
BANCHI BAR CON LAVELLOBAR COUNTERS WITH SINKS
2.18
SV 1/1 SER 01
GR 001 GR 003 GRX 01AG 101
S 1/1
TRG 01
C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01PC 01PMC 01CAS 1F CAS 1S
RUM 2
RUM 1
GR 002
S 2/2
UCR BBGP 501CAR 06PGR 04 PGR 06PGR 02
IL 301
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
4500
500
475
2500
450
Sezioni cella banco bar Bar counter case section
Con sportelloWith door
Con cassetti 1/2x2With drawers 1/2x2
Con cassetti 1/3+2/3With drawers 1/3+2/3
Con cassetti 1/3x3With drawers 1/3x3
560
255155
355
155
155
155255
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Cella maggiorata di 2 vani2 more case increased unit
Cella maggiorata di 2 vanisenza unità condensatrice
2 more case increased unit without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
65073
65080
65075
65082
63015
63017
2.19 CXA
SEZIONI BANCHI BAR REFRIGERAZIONE VENTILATA SENZA LAVELLOVENTILATED REFRIGERATED BAR COUNTERS WITHOUT SINK - SECTION VIEWS
CARATTERISTICHE
FEATURES
Banchi bar refrigerati nelle misure 100 - 150 - 200 - 250 - 300 - 350 - 400 - 450 profondità 70 cm.Struttura portante in tubolare d’acciaio verniciato con polveri epossidiche a forno a 180° C con elementi d’irrigidimento, piediniregolabili.Cella isolata monoblocco con poliuretano ecologico densità 40 Kg/m3 senza gas CFC, con pareti e fondo in acciaio inox AISI 30418/10 finitura 2B con angoli raggiati come da normative igieniche. Fiancate laterali esterne in lamiera plastificata. Vano sportellocon dimensioni commerciali (mm 603, mm 444). Una griglia in filo plastificata posizionabile su tre diversi livelli per ogni vano.Possibilità di dotare le celle di cassetti da 1/2x2, 1/3x3, 1/3+2/3.Piano lavoro in acciaio inox AISI 304 18/10 finitura Scotchbrite.Impianto di refrigerazione costituito da compressore ermetico, condensatore con tubo di rame ed alette d’alluminio raffreddato adaria con ventilatore, evaporatore ventilato con tubo in rame ed alette d’alluminio alimentato a capillare (versione con unitàcondensatrice) e a valvola (versione senza unità condensatrice).Il compressore è del tipo adatto per lavoro a MBP e HBP (media ed alta pressione d’aspirazione). Il sistema è collaudato a 32°Ced al 60% U.R. ambiente.Ogni banco é sottoposto a collaudo di refrigerazione ed a prova d’impianto elettrico (vedi certificato di collaudo inserito nell’appositatasca in plastica sul banco lato operatore).La temperatura della cella (+3°C, +8°C) è regolata da pannello comandi elettronico e lo sbrinamento è automatico. L’evacuazionedella condensa avviene tramite uno scarico protetto da apposita valvola antiriflusso.
Refrigerated bar counters are available in the following lengths: 100-150-200-250-300-350-400-450 cm, and depth: 70 cm.The holding structure is made of tubular steel varnished with epoxy powders at 180°C furnace temperature, with stiffening elements and adjustablefeet. The single block case is isolated by ecological polyurethane of 40 kg/m3 density Chlorine/Fluorine/Carbide-free, with AISI 304 18/10 2B finishedstainless steel walls and base with rounded corners according to hygiene norms. Outside lateral plastic coated plates. The compartment with doorhas market dimensions (that is: 603 mm, 444 mm). One plastic coated wire grid shelf that can be set on three different levels of each compartment.The cases can be equipped with three different sets of drawers, that is: 1/2x2, 1/3x3, 1/3+2/3. AISI 304 18/10 Scotchbrite finished stainless steelworktop. Refrigerating system constituted by hermetic compressor, condenser with copper pipe and aluminum wings air-cooled by fan, ventilatedevaporator with copper pipe and aluminum wings capillary fed (on version with condenser) and valve evaporator (on version without condenser). Thecompressor is the MBP and HBP (medium and high suctioning pressure) work suitable kind. The system was tested at a 32°C and at a 60% relativehumidity environment.Every counter is submitted to a refrigerating test and to an electric system test (see the test certification located in the pocket stuck on purpose tothe counter on the worker side).The case temperature (+3°C, +8°C) can be regulated by an electronic switchboard and the defrosting system is automatic. A back flow preventingvalve was located on purpose in the drainage to protect it during the evacuation process of condensed water that take place thanks to it.
689
554
949
172
1131
188
951700
43 123
22310
689
650326
949
172
1131
188
951
43 123
22310
Prof.70 SEZIONEDepth 70 - Section view
SEZIONE SU VANO UNITA’ CONDENSATRICEDepth 70 - Condenser compartment section view
Prof.70
BANCHI BAR REFRIGERAZIONE VENTILATA SENZA LAVELLOVENTILATED REFRIGERATED BAR COUNTERS WITHOUT SINK
CXA 2.20
500
1000
1500
500
100
150
500
2000
500
200
SV 1/1 SER 01
GR 001 GR 003 GRX 01AG 101
S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01PC 01PMC 01CAS 1F CAS 1S
GR 002
S 2/2
UCR BB
RUM 2RUM 1 PGR 04PGR 02 PGR 06PGR 06
GP 501CAN 01 LAR 01 LAQ 01 LAQ 02LAR 02
TRG 01
CAR 06
IL 301
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
ATTENZIONE: i disegni sotto riportati si riferiscono alla versione cella normaleAttention: the pictures underneath show standard number of case
Tutta cella senza unità condensatriceFull case without condenser unit
Cod.
63020
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cod.
63021
63022
63023
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
63030
63031
65007
65014
63032
2.21 CXA
BANCHI BAR REFRIGERAZIONE VENTILATA SENZA LAVELLOVENTILATED REFRIGERATED BAR COUNTERS WITHOUT SINK
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
63033
63034
65022
65029
63035500
2500
500
250
3000
500
475
1500
300
SV 1/1 SER 01
GR 001 GR 003 GRX 01AG 101
S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01PC 01PMC 01CAS 1F CAS 1S
GR 002
S 2/2
UCR BB
RUM 2RUM 1 PGR 04PGR 02 PGR 06PGR 06
GP 501CAN 01 LAR 01 LAQ 01 LAQ 02LAR 02
TRG 01
CAR 06
IL 301
3500
500
475
2000
350
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Cella maggiorata di 2 vani2 more case increased unit
Cella maggiorata di 2 vanisenza unità condensatrice
2 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
63036
63037
65037
65044
63038
63039
63040
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Cella maggiorata di 2 vani2 more case increased unit
Cella maggiorata di 2 vanisenza unità condensatrice
2 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
63041
63042
65051
65058
63043
63044
63045
CXA
BANCHI BAR REFRIGERAZIONE VENTILATA SENZA LAVELLOVENTILATED REFRIGERATED BAR COUNTERS WITHOUT SINK
2.22
4000
500
475
2000
400
4500
500
475
2500
450
SV 1/1 SER 01
GR 001 GR 003 GRX 01AG 101
S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
IVL 001VLT 01PC 01PMC 01CAS 1F CAS 1S
GR 002
S 2/2
UCR BB
RUM 2RUM 1 PGR 04PGR 02 PGR 06PGR 06
GP 501CAN 01 LAR 01 LAQ 01 LAQ 02LAR 02
TRG 01
CAR 06
IL 301
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Cella maggiorata di 2 vani2 more case increased unit
Cella maggiorata di 2 vanisenza unità condensatrice
2 more case increased unit without condenser unit
Tutta cella senza unità condensatriceFull case without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
63046
63047
65065
65072
63048
63049
63050
Cella normaleStandard case number
Cella normale senza unità condensatriceStandard case number without condenser unit
Cella maggiorata di 1 vanosenza unità condensatrice
1 more case increased unit without condenser unit
Cella maggiorata di 2 vani2 more case increased unit
Cella maggiorata di 2 vanisenza unità condensatrice
2 more case increased unit without condenser unit
Cella maggiorata di 1 vano1 more case increased unit
Cod.
63051
63052
65079
65086
63053
63054
2.23 CXA
PIANTE E SEZIONI BANCHI BAR REFRIGERAZIONE VENTILATA ANGOLARIVENTILATED REFRIGERATED CORNER BAR COUNTERS - PLANS AND SECTION VIEWS
P. 70
688
554
1131
188
710
53
700
43 123
22310
951
1156,5
688
608,5
2280
R.2
230,
5
LATO OPERATOREWORKER SIDE
BB 1/45°
BB 1/90°
688
723,5
1031
1452
1452
R.557
LATOOPERATORE
WORKER SIDE
1052
688
R.2
004
LATO OPERATOREWORKER SIDE
BB 2/45°
CARATTERISTICHE
Struttura con le stesse caratteristiche dei banchi bar refrigerati, cella solo nella lunghezza cm 100 con stesse caratteristiche dellecelle dei banchi bar. Possibilità di dotare la cella di due cassettiere nella versione senza lavello, di una cassettiera nella versionecon un lavello.
This structure has the same features of the refrigerated bar counters, the case is available only 100 cm long and got the same features of the barcounter's ones. In the version without sink there is the chance to equip the case with 2 drawer sets, while in the version with one sink, only onedrawer set can be provided.
FEATURES
Depth 70
1131
BB 1/45° Con unità condensatrice / With condenser unit
Cod. 64911
1131
BB 1/45° Senza unità condensatrice / Without condenser unit
1131
BB 1/90° Senza unità condensatrice / Without condenser unit
1131
BB 2/45° Senza unità condensatrice / Without condenser unit
CXA
BANCHI BAR REFRIGERAZIONE VENTILATA ANGOLARIVENTILATED REFRIGERATED CORNER BAR COUNTERS
2.24
SV 1/1 SER 01
GR 001 GR 003AG 101
S 1/1 C 1/3x3C 1/3+2/3C 1/2x2
RUM 2
RUM 1
GR 002
S 2/2
UCR BBGP 501LAR 01 LAQ 01 LAQ 02LAR 02 GRX 01
IL 301
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
Cod. 64910
Cod. 64900
Cod. 65087
2.25 CXA
SEZIONI BANCHI BAR NEUTRI LINEARI E ANGOLARILINEAR AND CORNER NEUTRAL BAR COUNTERS - SECTION VIEWS
P.70
688
710
53
1131
188
43 123
22310
326
367 1156,5
688
608,5
2280
R.2
230,
5
LATO OPERATOREWORKER SIDE
BB 1/45°
688
723,5
1031
1452
1452
R.557
LATOOPERATORE
WORKER SIDE
1052
688
R.2
004
LATO OPERATOREWORKER SIDE
BB 2/45°BB 1/90°
CARATTERISTICHE Struttura portante in tubolare d’acciaio verniciato a polveri epossidiche a forno a 180° con elementi d’irrigidimento, piedini regolabili,piano lavello in acciaio inox AISI 304 18/10 finitura Scotchbrite.Banchi lineari lato operatore in nobilitato grigio, attrezzato a seconda delle dimensioni con vano tramoggia rifiuti in acciaio inox,vano con scorrevoli da cm 100 oppure vano con ripiano da cm 100 e cm 150 a giorno.
Tubular steel holding structure varnished with epoxy powders at 180°C furnace temperature with stiffening elements, adjustable feet, AISI 304 18/10Scotchbrite finished stainless steel sink top.The linear bar counters got grey melamine worker side paneling, equipped, according to its dimensions, with stainless steel garbage hopper, with100 cm long compartment with sliding doors or with 100 cm and 150 cm long open compartment with shelf.
FEATURES
Depth 70
CXA
SEZIONI BANCHI BAR NEUTRI LINEARI E ANGOLARILINEAR AND CORNER NEUTRAL BAR COUNTERS - SECTION VIEWS
2.26
2000
1460
200
2500
960
250
CAR 06PGR 02RUM 2RUM 1 PGR 04 LAR 01 LAQ 01 LAQ 02LAR 02
CAS 1F
PMC 01 PC 01 PGR 06
CAS 1S
ACCESSORI FITTINGS
Vedi pag. 2.26See page 2.26
1000
960
100
1500
1460
150
Cod. 64990
Cod. 64991
Cod. 64987
Cod. 64988
2.27 CXA
BANCHI BAR NEUTRI LINEARI-ANGOLARILINEAR-CORNER NEUTRAL BAR COUNTERS
1131
998682 682
BB 1/90°
1131 1040
BB 2/45°
1131
550 550565 565
BB 1/45°
3000
1460
300
CAR 06PGR 02RUM 2RUM 1 PGR 04 LAR 01 LAQ 01 LAQ 02LAR 02
CAS 1F
PMC 01 PC 01 PGR 06
CAS 1S
ACCESSORIVedi pag. 2.26See page 2.26
Cod. 64989
Cod. 64914
Cod. 64902
Cod. 65089
2.28CXA
BANCHI BAR: ACCESSORIBAR COUNTERS: FITTINGS
S 1/1
Sportello 1/1 (detrarre quando si sostituisce con cassettiera) Door 1/1 (price to be deducted when drawers are added)
C 1/2x2
Cassettiera 1/2 x 2 Drawers 1/2x2
C 1/3+2/3
Cassettiera 1/3 + 2/3 Drawers 1/3+2/3
C 1/3x3
Cassettiera 1/3 x 3 Drawers 1/3x3 (not available on BT version)
SER 01
N.1 serratura N. 1 lock
SV 1/1
Sportello a vetri Glass door
S 2/2
Sportello doppio per birra - installato Double door for beer counter - installed
TRG 01
Tramoggia rifiuti - installato Garbage-hopper - installed
PMC 01
Piano macchina caffè (l’inserimento non è possibile nella versione banco bar tutta cella)Coffee machine unit (it can't be built on full case bar counters)
- L 100
CAS 1S
Cassetto cassa Cash drawer
CAS 1F
Cassetto fondi Drawer for coffee grounds
IL 301
Illuminazione interno cellaInside case lighting
- un neon - one neon light
2.29 CXA
BANCHI BAR: ACCESSORIBAR COUNTERS: FITTINGS
IVL 001
Involucro vano lavatazze Protective cover for cup/glass washer compartment
PGR 02
340
550
N°2 Pozzetti granite da incasso (con unità condensatrice)N°2 built-in water-ice cylindricaltanks (with condenser unit)
PGR 04
600
550
N°4 Pozzetti granite da incasso(con unità condensatrice)
N°4 built-in water-ice cylindricaltanks (with condenser unit)
PGR 06
870
550
N°6 Pozzetti granite da incasso (con unità condensatrice)N°6 built-in water-ice cylindricaltanks (with condenser unit)
RUM 1
Miscelatore monoleva corta Ø 32 (detrarre quando si sostituisce con la leva lunga) Short lever tap Ø 32 (to be deducted when replaced by a long lever tap)
RUM 2
Miscelatore monoleva lunga Long lever tap
CAR 01
Carapina Ø 200 mm Ice-cubes cylindrical tank Ø 200 mm
CAN 01
Canotti Ø 94 mm Bottle-holder Ø 94 mm
LAR 01
Lavello tondo saldato Ø 42 h.17 cm con scarico Welded round sink Ø 42 h.17 cm with drain
LAR 02
Lavello tondo saldato doppio Ø 42 h.17cm con scarico Welded round double sink Ø 42 h.17 cm with drain
VLT 01
Vaschetta vano lavatazze Compartment for cup/glass- washer washer
UC NUC Unità remota - entro 10 mt. Remote unit - within 10 mt.Unità remota - da 10 mt. a 20 mt. Remote unit - from 10 to 20 mt.
UC NUC Unità remota - entro 10 mt. Remote unit - within 10 mt.Unità remota - da 10 mt. a 20 mt. Remote unit - from 10 to 20 mt.
UC NUC Unità remota - entro 10 mt. Remote unit - within 10 mt.Unità remota - da 10 mt. a 20 mt. Remote unit - from 10 to 20 mt.
PC 01
Piano cassa Cash desk
BANCHI BAR: ACCESSORIBAR COUNTERS: FITTINGS
CXA 2.30
LAQ 01
Lavello quadrato saldato con scaricoWelded square sink with drain
40x40x h.20 cm 45x45x h.20 cm
LAQ 02
Lavello quadrato doppio saldato con scaricoWelded square double sink with drain
40x40x h.20 cm 45x45x h.20 cm
PPG 01
Predisposizione per bancalina in granito (solo per banchi bar statici)Supporting surface for granite top (for static bar counter only)
150
200
250
300
350
400
Tipologia / kind
GP 501
445
720
Griglia di protezione vano motore Engine compartment protecting grid
Griglia supplementare in filo plastificato (detrarre quando si sostituisce uno sportello con una cassettiera)Additional plastic-coated wire-grid (to be deducted when a door is replaced by drawers)
TIPOLOGIA / kindVENTILATOVENTILATED
STATICOSTATIC
GR 001
Griglia supplementare in scatolato acciaio inox (detrarre GR 001)Additional stainless steel plated wire-grid (GR 001 to be deducted)
GR 002
Nel vano con evaporatore In the compartment with evaporator
Nel vano senza evaporatore In the compartment without evaporator
Posizione fissa Fixed position
TIPOLOGIA / kindVENTILATOVENTILATED
STATICOSTATIC
Nel vano con evaporatore In the compartment with evaporator
Nel vano senza evaporatore In the compartment without evaporator
Posizione fissa Fixed position
AG 101
Attrezzaggio gastronorm 325 x 530 mm (vaschette escluse) Gastronorm fitting 325 x 530 mm (trays not included)
2.31 CXA
BANCHI BAR: ACCESSORIBAR COUNTERS: FITTINGS
GR 003
Set griglia in PST fondo cella refrigerataPST base grid set for refrigerating case
100
150
200
250
300
350
400
PROFONDITA’ / Depth
Tipologia / Kind
70
GRX 01
Set griglia inox fondo cella refrigerataInox base grid set for refrigerating case
100
150
200
250
300
350
400
PROFONDITA’ / Depth
Tipologia / Kind
70
BANCHI BAR: ACCESSORI - DATI TECNICIBAR COUNTERS: FITTINGS - TECHNICAL INFORMATION
CXA 2.32
Unità condensatrice remota per banchi barventilati - Remote condenser for ventilated bar counters
Unità condensatrice remota per banchi barstatici - Remote condenser for static bar counters
100 (2 vani) fino 10 mt.100 (2 compartments) up to 10 mt.
150 (3 vani) fino 10 mt.150 (3 compartments) up to 10 mt.
200 (4 vani) fino 10 mt.200 (4 compartments) up to 10 mt.
250 (5 vani) fino 10 mt.250 (5 compartments) up to 10 mt.
300 (6 vani) fino 10 mt.300 (6 compartments) up to 10 mt.
350/400 (7/8 vani) fino 10 mt.350/400 (7/8 compartments) up to 10 mt.
100 (2 vani) da 10 mt. a 20 mt.100 (2 compartments) from 10 to 20 mt
150 (3 vani) da 10 mt. a 20 mt.150 (3 compartments) from 10 to 20 mt
200 (4 vani) da 10 mt. a 20 mt.200 (4 compartments) from 10 to 20 mt
250 (5 vani) da 10 mt. a 20 mt.250 (5 compartments) from 10 to 20 mt
300 (6 vani) da 10 mt. a 20 mt.300 (6 compartments) from 10 to 20 mt
350/400 (7/8 vani) da 10 mt. a 20 mt.350/400 (6 compartments) from 10 to 20 mt
TIPOLOGIA CELLA / Case kindUCR BB
340
400/630
560
100 (2 vani) fino 10 mt.100 (2 compartments) up to 10 mt.
150 (3 vani) fino 10 mt.150 (3 compartments) up to 10 mt.
200 (4 vani) fino 10 mt.200 (4 compartments) up to 10 mt.
250 (5 vani) fino 10 mt.250 (5 compartments) up to 10 mt.
100 (2 vani) da 10 mt. a 20 mt.100 (2 compartments) from 10 to 20 mt
150 (3 vani) da 10 mt. a 20 mt.150 (3 compartments) from 10 to 20 mt
200 (4 vani) da 10 mt. a 20 mt.200 (4 compartments) from 10 to 20 mt
250 (5 vani) da 10 mt. a 20 mt.250 (5 compartments) from 10 to 20 mt
TIPOLOGIA CELLA / Case kind
RESA
yield
(W/°C)
FREQUENZA
frequency
(Hz)
TENSIONE
voltage
(V)
POTENZA ASSORBITA
absorbed power
(W)
TEMP. DI ESERCIZIO
working temp.
(°C)
CILINDRATA
displacement
(cm3)
100150200250
100150200250300350400
BANCHI BAR VENTILATI CON UNITA’ CONDENSATRICE VENTILATED BAR COUNTERS WITH CONDENSER UNIT
230230230230
230230230230230230230
50505050
50505050505050
316353470547
377377506583813813813
+4; +8+4; +8+4; +8+4; +8
+3; +8+3; +8+3; +8+3; +8+3; +8+3; +8+3; +8
4,55,677,578,85
5,675,677,578,85141414
427/-10511/-10710/-10837/-10
511/-10511/-10710/-10837/-101375/-101375/-101375/-10
MODELLOmodel
CELLACase
BANCHI BAR STATICI CON UNITA’ CONDENSATRICE STATIC BAR COUNTERS WITH CONDENSER UNIT
3ANGOLICorner units
3. A
ngol
iCo
rner u
nits
DSL - Divisione della IFI S.p.A. - Strada Selva Grossa, 28/30 - 61010 Tavullia (PU) - Italy Tel. (+39)0721.200251 - Fax (+39)0721.201847 - www.dsl-technology.it - [email protected]
3.01 CXA
SEZIONI ANGOLI 1/90-45° CURVI e SQUADRATICORNER UNITS SECTION VIEWS 1/90°-45°- CURVED AND SQUARED
CARATTERISTICHE
FEATURES
ALTO BASSO
Struttura portante in tubolare d’acciaio verniciato con polveri epossidiche a forno a 180° con elementi d’irrigidimento,piedini regolabili. Vano a giorno in laminato grigio con ripiano (solo CX1 e IX1).Versioni: con bancalina, con piano alto e con piano basso.Gli angoli 1/90° - 45° nella versione piano alto sono dotati di un cassetto cassa o fondi caffè.
Supporting structure made of tubular steel varnished with epoxy powders at 180° centigrade furnace temperature, with stiffening elements andadjustable feet. Gray laminate open compartement with shelf (CX1 and IX1 only)Versions: counter with over standing top, tall counter with full surface top and low counter with full surface top.1/90° - 45° corners 'tall full surface top' version are equipped with cash and coffee grounds drawers.
688
710
951
53
188
1131
949
172
10
43 123
223
326
367
39
BASSO
688
710951
749
30
172
728
188
53
3938
326
367
688
710931
749
10
172
728
188
33
3938
326
367
688
710
188
1131
326
367
ALTOwith counter top
low
tall
ANGOLI CURVI CON PIANO GREZZO ANGOLI SQUADRATI CON PIANO INOXCurved corner units with raw top Squared corner units with stainlless stell top
364
R.3
39
688
852
451
LATO OPERATOREWORKER SIDE
CXA
ANGOLI CX 1/90° CURVICURVED CORNER UNITS CX 1/90°
3.02
CX 1/90° ALTO BASSO with counter top
364
R.3
39
688
852
451
LATO OPERATOREWORKER SIDE
CX 1/90° ALTO / Tall
325
R.3
39
728
451
852
LATO OPERATOREWORKER SIDE
CX 1/90° BASSO / low
1131
CX 1/90° ALTO BASSO con bancalina / with counter top
1131
CX 1/90° ALTO / tall
931
CX 1/90° BASSO / low
ATTENZIONE: Compreso dicassetto soldi / PLEASE NOTE:
Includes cash drawer.
Cod. 65389
Cod. 65390
Cod. 65388
3.03 CXA
ANGOLI IX 1/90° SQUADRATISQUARED CORNER UNITS IX 1/90°
364
688
852
451
LATO OPERATOREWORKER SIDE
IX 1/90° ALTO BASSO with counter top
364
688
852
451
LATO OPERATOREWORKER SIDE
IX 1/90° ALTO / Tall
325
728
451
852
LATO OPERATOREWORKER SIDE
IX 1/90° BASSO / low
1131
IX 1/90° ALTO BASSO con bancalina / with counter top
1131
IX 1/90° ALTO / tall
951
IX 1/90° BASSO / low
ATTENZIONE: Compreso dicassetto soldi / PLEASE NOTE:
Includes cash drawer.
Cod. 65604
Cod. 65605
Cod. 65606ATTENZIONE: disponibile solocon piano in acciaio inox
PLEASE NOTE: includes stainlesssteel top
CXA
ANGOLI CX 1/45° CURVICURVED CORNER UNITS CX 1/45°
3.04
688
R.4
89
260
LATO OPERATOREWORKER SIDE
467
947
CX 1/45° ALTO BASSO with counter top
688
R.4
89
260
LATO OPERATOREWORKER SIDE
467
947
CX 1/45° ALTO / Tall
728 R
.489
260
LATO OPERATOREWORKER SIDE
467
39
947
CX 1/45° BASSO / low
1131
CX 1/45° ALTO BASSO con bancalina / with counter top
1131
CX 1/45° ALTO / tall
931
CX 1/45° BASSO / low
ATTENZIONE: Compreso dicassetto soldi / PLEASE NOTE:
Includes cash drawer.
Cod. 65392
Cod. 65393
Cod. 65391
3.05 CXA
ANGOLI IX 1/45° SQUADRATISQUARED CORNER UNITS IX 1/45°
688
260
LATO OPERATOREWORKER SIDE
467
947
IX 1/45° ALTO BASSO with counter top
688
260
LATO OPERATOREWORKER SIDE
467
947
IX 1/45° ALTO / Tall
728
260
LATO OPERATOREWORKER SIDE
467
947
IX 1/45° BASSO / low
1131
IX 1/45° ALTO BASSO con bancalina / with counter top
1131
IX 1/45° ALTO / tall
951
IX 1/45° BASSO / low
ATTENZIONE: Compreso dicassetto soldi / PLEASE NOTE:
Includes cash drawer.
ATTENZIONE: disponibile solocon piano in acciaio inox
PLEASE NOTE: includes stainlesssteel top
Cod. 65616
Cod. 65615
Cod. 65614
SEZIONI ANGOLI 2/90-45° CURVI e SQUADRATICORNER UNITS SECTION VIEWS 2/90°-45° - CURVED AND SQUARED
3.07 CXA
ALTO BASSO
688
710
53
188
1131
949
10
172
43 123
223
BASSO
688
710
188
1131
ALTOwith counter top
low
tall
CARATTERISTICHE
FEATURES
Struttura portante in tubolare d’acciaio verniciato con polveri epossidiche a forno a 180° con elementi d’irrigidimento, piediniregolabili. Versioni: con bancalina, con piano alto e con piano basso.
Tubular stainless steel holding structure varnished with epoxy powders at 180° C furnace temperature with stiffening elements, and adjustable feet.Versions: with standing counter top, with high full top e with low full top.
688
710951
749
30
172
728
188
53
3938
688
710931
749
10
172
728
188
33
3938
ANGOLI CURVI CON PIANO GREZZO ANGOLI SQUADRATI CON PIANO INOXCurved corner units with raw top Squared corner units with stainlless stell top
CXA
ANGOLI CX 2/90° CURVICURVED CORNER UNITS CX 2/90°
3.08
688
33
LATO OPERATOREWORKER SIDE
R.6
96
CX 2/90° ALTO BASSO with counter top
688
33
LATO OPERATOREWORKER SIDE
R.6
96
CX 2/90° ALTO / Tall
728
33
39
LATO OPERATOREWORKER SIDE
R.6
96
CX 2/90° BASSO / low
1131
CX 2/90° ALTO BASSO con bancalina / with counter top
1131
CX 2/90° ALTO / tall
931
CX 2/90° BASSO / low
Cod. 65395
Cod. 65396
Cod. 65394
3.09 CXA
ANGOLI IX 2/90° SQUADRATISQUARED CORNER UNITS IX 2/90°
688
33
LATO OPERATOREWORKER SIDE
IX 2/90° ALTO BASSO with counter top
688
33
LATO OPERATOREWORKER SIDE
IX 2/90° ALTO / Tall
728
33
39
LATO OPERATOREWORKER SIDE
IX 2/90° BASSO / low
1131
IX 2/90° ALTO BASSO con bancalina / with counter top
1131
IX 2/90° ALTO / tall
951
IX 2/90° BASSO / low
ATTENZIONE: disponibile solocon piano in acciaio inox
PLEASE NOTE: includes stainlesssteel top
Cod. 65607
Cod. 65608
Cod. 65609
CXA
ANGOLI CX 2/45° CURVICURVED CORNER UNITS CX 2/45°
3.10
688
51,5
LATO OPERATOREWORKER SIDE
R.696
CX 2/45° ALTO BASSO with counter top
688
51,5
LATO OPERATOREWORKER SIDE
R.696
CX 2/45° ALTO / Tall
728
51,5
LATO OPERATOREWORKER SIDE
R.696
39
CX 2/45° BASSO / low
1131
CX 2/45° ALTO BASSO con bancalina / with counter top
1131
CX 2/45° ALTO / tall
931
CX 2/45° BASSO / low
Cod. 65398
Cod. 65399
Cod. 65397
ANGOLI IX 2/45° SQUADRATISQUARED CORNER UNITS IX 2/45°
3.11 CXA
688
51,5
LATO OPERATOREWORKER SIDE
IX 2/45° ALTO BASSO with counter top
688
51,5
LATO OPERATOREWORKER SIDE
IX 2/45° ALTO / Tall
728
51,5
LATO OPERATOREWORKER SIDE
39
IX 2/45° BASSO / low
1131
IX 2/45° ALTO BASSO con bancalina / with counter top
1131
IX 2/45° ALTO / tall
951
IX 2/45° BASSO / low
Cod. 65619
Cod. 65618
Cod. 65617ATTENZIONE: disponibile solocon piano in acciaio inox
PLEASE NOTE: includes stainlesssteel top
3.13 CXA
SEZIONI E PIANTE ANGOLI BX 1/90°-45°CORNER UNITS BX 1/90° - 45° PLANS AND SECTION VIEWS
CARATTERISTICHE
FEATURES
BX 1/90°-45°
BX 1/45°
Struttura schiumata in monoblocco con poliuretano ad alta densità (40 Kg/m3), senza piano ma con cielo coibentato con poliuretanospessore mm 30. Evaporatore posto a parete.Refrigerazione ventilata con un evaporatore. Interno in acciaio inox AISI 304 finitura 2B, lato sportelli esterno in acciaio inox 18/10Scotchbrite, fondo in lamiera zincata e fianchi in lamiera plastificata. Interno cella con angoli raggiati.
High density (40 Kg/m3) polyurethane skimmed structure, without over-top but with 30 mm thick polyurethane insulated ceiling. Evaporator locatedon the wall.Ventilated refrigerating system with one evaporator. AISI 304 2B finished stainless steel inside cell, Scotchbrite 18/10 stainless steel outside doorsurface, galvanized iron-sheet base and plastic coated side plates. Inside rounded corners.
688
38
188
710
33
931
749
10
172
326
367
BX 1/90°
1156,5
2280
688
608,5
R.2
230,
5
LATO OPERATOREWORKER SIDE
688
723,5
1452
1452
1031
R.557
LATOOPERATORE
WORKER SIDE
931
BX 1/90° NEUTRO / neutral
CXA
ANGOLI BX 1/90°CORNER UNITS BX 1/90°
3.14
931
BX 1/90° REFRIGERATO CON IMPIANTO VENTILATO SENZA UNITA’ CONDENSATRICERefrigerated with ventilated installation without condenser unit
ACCESSORI
Disponibili su BX 1/90 refrigerato Available in refrigerated BX 1/90
Vedi accessori Banchi Bar pag. 2.26See Bar Counters fittings on page 2.26
Cod. 64903
Cod. 64901
ANGOLI BX 1/45°CORNER UNITS BX 1/45°
3.15 CXA
931
BX 1/45° NEUTRO / neutral
931
BX 1/45° REFRIGERATO CON IMPIANTO VENTILATO SENZA UNITA’ CONDENSATRICERefrigerated with ventilated installation without condenser unit
931
BX 1/45° REFRIGERATO CON IMPIANTO VENTILATO E UNITA’ CONDENSATRICE Refrigerated with ventilated installation and condenser unit
ACCESSORI
Disponibili su BX 1/90 refrigerato Available in refrigerated BX 1/90
Vedi accessori Banchi Bar pag. 2.26See Bar Counters fittings on page 2.26
Cod. 64915
Cod. 64912
Cod. 64913