Chromatography is our world
5
SPE Introduction
25mL
900mg Bed
600mg Bed
300mg Bed
SPE columnsOpen top tubes with male luer bottom, available with or without flangeProcess multiple samples with vacuum manifold or automated SPE instrumentsProcess individual samples manually with use of adapter and syringe
SPE 96-well platesHigh throughput SPE devices8" x 12" standard 96-well format2mL square wells
SPE cartridgesFemale luer top and male luer bottomProcess single cartridge by syringeor multiple cartridges by vacuumStack for multi-step extractions
15mL
6mL3mL
1mL
Overview of SPE Cartridges and 96-Well Plates
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
sample preparation
Resolution Systems is dedicated to providing consolidated shopping, cost containment,as well as personalized customer and technical service for the chromatography community.
Chromatography is our world
5
SPE Introduction
25mL
900mg Bed
600mg Bed
300mg Bed
SPE columnsOpen top tubes with male luer bottom, available with or without flangeProcess multiple samples with vacuum manifold or automated SPE instrumentsProcess individual samples manually with use of adapter and syringe
SPE 96-well platesHigh throughput SPE devices8" x 12" standard 96-well format2mL square wells
SPE cartridgesFemale luer top and male luer bottomProcess single cartridge by syringeor multiple cartridges by vacuumStack for multi-step extractions
15mL
6mL3mL
1mL
Overview of SPE Cartridges and 96-Well Plates
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
resolutionsys.com
Phone: (616) 392 - 8001 | (800) 572 - 6653
Fax: (616) 396 - 7520
Address: 590 East 32nd Street | Holland, MI 49423
Email: [email protected]
Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 3
Table of Contents
Cartridges and 96-Well Plates4 SPE Introduction8 Apogee SPE Cartridges and 96-Well Plates10 Apogee SPE Method Development16 Apogee SPE Ordering Information19 CEREXTM uSPE (ultraSPE) General Information20 CEREXTM uSPE (ultraSPE) Silica Sorbents21 CEREXTM uSPE (ultraSPE) Polymer Resin Sorbents
22 CEREXTM uSPE (ultraSPE) Ordering Information
Vacuums and Manifold Accessories26 MicroLute Manifold27 Apogee Vacuum Manifold28 Vacuums and Manifold Accessories Ordering Information29 Solvent Evaporators30 EVX 96 Evaporex31 CEREXTM uSPE (ultraSPE) System 96 and System 48
32 CEREXTM uSPE (ultraSPE) System 96 and System 48 Ordering Information
P3 Protein Precipitation Plates33 P3 Protein Precipitation Plates Ordering Information33 Micro-LuteTM and BioVyon Co-Sinter Products Ordering Information
Filtration34 Filtration Membrane Compatibility Chart35 Filtration Plates36 Syringe and Membrane Filters37 Apogee Syringe and Membrane Filters38 Apogee Syringe Filters Ordering Information40 MicrofiltrationSpinFiltersanReceiverTubesOrdering Information41 Apogee Membrane Filters Ordering Information42 Apogee Filter Holders Ordering Information43 PH-Fix Test Strips Ordering Information44 Funnel-Fit Filters Ordering Information45 QuEChERS
46 QuEChERS Ordering Information
47 Xenosep TCLP Ordering Information
48 TSS Filters for Standard Methods 2540 C 2540 D Ordering Information
SPE Systems49 SPE Systems for EPA Method 1664A51 SPE Systems for EPA Method 1664A Ordering Information
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com4Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
2
SPE Introduction
How to choose an SPE product1.Characterize the sample
Factors such as the analyte’s polarity relative to thematrix, the presence of charged functional groups, solubility, molecular weight, etc., determine how strongthe analyte is retained by the packed bed.
2.Select a retention strategyThere are two basic methods for sample treatment:a. Select the packing bed to retain the desired analyte.
The contaminants are washed off and the desired analyte is then eluted for analysis.
b. Select the packing bed to retain the contaminantsand the desired analyte passes directly through.
3.Select the proper packing typeSelect the proper packing type for the cleanest extract with the highest recovery. a. Reversed-phase packings are hydrophobic, silica-based
materials that retain moderately polar to non-polarcompounds from a polar matrix while washing off polarinterferences. Or you can retain non-polar contaminantswhile the polar compounds pass through unretained.
b. Normal-phase packings are hydrophilic, silica-basedmaterials that retain polar compounds from a non-polar matrix while washing off non-polar interferences.Or you can retain polar contaminants while non-polarcompounds pass through unretained.
c. Ion-exchange resins retain charged compounds orremove ionic interferences.
4.Optimize conditions for best resultsSelect proper bed size and suitable conditioning, washand elution solvents.a. Poor sample recovery often occurs when the packed
bed dimensions are not optimized. An excessive bedweight results in incomplete elution while an insuf�cientbed weight results in incomplete retention.
b. Consider the solvent strength relative to the packing material. The �nal conditioning solvent should be weak so it doesn’t act as an eluting solvent. Buffers should be used to control ionization of potentiallycharged compounds.
c. Wash solvents should remove weakly retained interferences without being strong enough to elutethe analyte.
d. Elution solvents should be strong enough to completely elute an analyte in a small volume (1–2mL).
By vacuummanifoldProcess multiplesamples on a vacuummanifold using SPE columns. Extend volume via reservoirs.
By filter flaskProcess large volumesamples by placingSPE tube with an online �ltration system
SPE methods
By syringeProcess individualsamples via luer hubsyringe. Connectsyringe directly to SPE cartridges or to SPE columns via adapters.
For Environmental ApplicationsRecommended SW-846 Cleanup Methods
Analyte GroupEPA
Method No.RecommendedSPE Sorbents
Aniline and Derivatives 3620 C18Chlorinated Pesticides 3620 C18, Florisil®
Chlorinated Hydrocarbons 3620 C18, PhenylolF ,81C0263srehteola lisirH ®
Nitroaromatics and Cyclic Ketones
3620 DVB, IC-RP
8asortiN 1C0263 ,0163senimOrganochlorine Pesticides 3620 C18, Florisil®
Organophosphorus Pesticides 3620 Florisil®, Carbograph P ,81C0363 ,0263s’B hpargobraC ,XCSC
AaWmuelorteP 1163et animuls P ,81C0363slone lynehPh
Phthalate Esters 3610, 3620 C18, DVBPolynuclear Aromatic Hydrocarbons
3630 C18, Phenyl
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 5Chromatography is our world
3
SPE IntroductionSPE method development
General method development proceduresStep 1—Condition Step 2—Load Step 3—Wash Step 4—Elute
Reversed-phase extraction procedureMechanism: Bind moderately polar to non-polar compounds from a polar sample matrix
Methanol followed by water
Process sample at a ow rate of 1–5mL/min
Water or water:methanol (95:5)
Methanol or acetonitrile. May need to add strong acid or base to organic solvent to break secondary interactions.
Normal-phase extraction procedureMechanism: Bind polar compounds from a non-polar sample matrix
IPA followed by hexane
Process sample at a ow rate of 1–5mL/min
Hexane or hexane:IPA (98:2)
IPA, ethyl acetate, acetone, or hexane:IPA (50:50)
Ion-exchange extraction procedureMechanism: Bind charged (negative/anionic or positive/cationic) compounds
Methanol:water (50:50) followed by low ionic strength (0.1M) buffer
Apply slowly: less than or equal to 1mL/min ion exchange kinetics are slower than reversed- or normal-phase
Methanol:low ionic strength (0.1M) buffer (10:90)
High ionic strength (0.5M–1.0M) buffer or modify pH such that the analyte is uncharged. May need to add organic to break hydrophobic interactions.
Recommended usage guidelines*Bed Size: 50mg 100mg 200mg 500mg 500mg 1000mg 2000mg 5000mg 10,000mg
Sorbent Retention Capacity: 2.5mg 5mg 10mg 25mg 25mg 50mg 100mg 250mg 500mgCondition Volume (4-bed volumes) 0.30mL 0.60mL 1.20mL 3.00mL 3.00mL 6.00mL 12.00mL 30.00mL 60.00mLWash Volume (6-bed volumes) 0.45mL 0.90mL 1.80mL 4.50mL 4.50mL 9.00mL 18.00mL 45.00mL 90.00mLMinimum Elution Volume (3-bed volumes) 0.23mL 0.45mL 0.90mL 2.25mL 2.25mL 4.50mL 9.00mL 22.50mL 45.00mL*Estimates only. Must optimize for each application.
1.To calculate sorbent bed volume, use 150μL for every 100mg of sorbent.
2.Retention capacity describes the total amount that an SPEsorbent will bind. This includes all compounds retained—analytesof interest as well as the contaminants.
3.Minimum elution volume recommended in bed size chart abovewill offer best sensitivity, but more solvent may be required depending on application.
Less Polar (Stronger Reversed-Phase Elution)
Solvent Polarity Chart
More Polar (Stronger Normal-Phase Elution)
HexaneIsooctane
CyclohexaneCarbon tetrachloride
TolueneChloroform
Methylene chlorideTetrahydrofuran
Ethyl etherAcetone
AcetonitrilePyridine
IsopropanolEthanol
MethanolWater
Acetic acid
ANALYTEINTERFERANCE
1 CONDITION by aspirating a few milliliters of suitable solvent or solution through the column.
2 ADD SAMPLE - extract and concentrate compounds ofinterest by aspirating a sample solution.
3 WASH - remove co-extracted interferences byaspirating 2mL or less of suitable solvent /solution.
4 ELUTE extracted compounds by aspirating1mL or less of suitable solvent /solution
Discard
Discard
Discard
Analyze
As a leading GC and LC column supplier, we havegained an unrivalled reputation for excellent quality, com-petive pricing and fast delivery.
SPE cartridges are available in a wide variety ofchemically bonded phases for rapid sample preparation byadsorption and elution. See page 6 for silica based
products.
For polymer phase selection, see our IRIS products.
This polymer based product is found from page 8 onwards.You will find a variety of chemistries (e.g. MCX, MAX, neutraland our new WAX and WCX)
If you are not familiar or are new to SPE, please contact us.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com6Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
SPE Introduction
Packing Description of Base Sorbent Retention MechanismNon-Polar
C18/14 Octadecyl Carbon Loading: 14% Endcapped 40μm irregularly-shaped silica,60Å mean porosity
The primary retention mechanism is strongly non-polarwith typical sample matrices of waterand aqueous biological fluids.
C18/18 Octadecyl Carbon Loading: 18% Endcapped 40μm irregularly-shaped silica,60Å mean porosity
The primary retention mechanism is strongly non-polarwith typical sample matrices of waterand aqueous biological fluids.
C18/22 Octadecyl Carbon Loading: 22% Endcapped 40μm irregularly-shaped silica,60Å mean porosity
The primary retention mechanism is strongly non-polarwith typical sample matrices of waterand aqueous biological fluids.
C18/OH Octadecyl Carbon Loading: 13% Not Endcapped 40μm irregularly-shaped silica,
60Å mean porosity.
The primary retention mechanism is moderatelynon-polar with typical sample matrix of aqueousbiological fluids. The lack of endcapping results insignificant polar secondary interactions.
C8 Octyl Carbon Loading: 12% Endcapped 40μm irregularly-shaped silica,60Å mean porosity
The primary retention mechanism is moderatelynon-polar with typical sample matrices of waterand aqueous biological fluids.
PH Phenyl Carbon Loading: 11% Endcapped 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is moderatelynon-polar with typical sample matrices of waterand aqueous biological fluids.
CH Cyclohexyl Carbon Loading: 9% Endcapped 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is moderatelynon-polar with typical sample matrices of waterand aqueous fluids.
C4 Butyl Carbon Loading: 9% Endcapped 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is moderatelynon-polar with typical sample matrices of waterand aqueous biological fluids.
C2 Ethyl Carbon Loading: 6% Endcapped 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is weaklynon-polar with typical sample matrices of plasma,urine and aqueous fluids.
C1 Methyl Carbon Loading - 3% 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is very weaklynon-polar with typical sample matrices of plasma,urine and aqueous fluids.
CNe Cyanopropyl Carbon Loading: 8% Endcapped 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is very weaklynon-polar and is used with aqueous sample matrices.
Polar
CN Cyanopropyl Carbon Loading: 7% Not Endcapped 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is polarwith typical sample matrices of non-polar solvents.
DIO Diol Carbon Loading: 7% 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is polarwith typical sample matrices of non-polarorganic extracts, oil and lipids.
SI Silica Gel 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is strongly polarwith typical sample matrices of non-polarorganic solvents, oils and lipids.
FLO Florisil® Florisil® is a registered trademarkof Floridin Co.
Florisil®, magnesium sulfate,150 - 250μm particle size.
The primary retention mechanism is polarwith environmental and organic extractsas typical sample matrices.
ALA Alumina AcidicAlumina, Al2O3,acidic particle size 50 - 200μm,pH 4.5
Activity I: The primary retention mechanisms are polar,Lewis acid/base and ion exchange.(Activity Levels II, III, IV, and V also available.Please inquire.)
ALN Alumina NeutralAlumina, Al2O3,neutral particle size 50 - 200μm,pH 7.5
The primary retention mechanisms are polar,Lewis acid/base and ion exchange.All alumina activity I.(Activity II, III, IV, V also available. Please inquire.)
ALB Alumina BasicAlumina, Al2O3,basic particle size 50 - 200μm,pH 10
The primary retention mechanisms are polar,Lewis acid/base and ion exchange.All alumina activity I.(Activity II, III, IV, V also available.Please inquire.)
Ionic Exchange
COOH Carboxylic Acid Ion Exchange Capacity - 0.3 meq/gm 40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism isweak cation exchange with typical samplematrices of water and biological fluids.
SCX BenzenesulfonicAcid Ion Exchange Capacity - 0.8 meq/gm 40μm irregularly-shaped silica,
60Å mean porosity.The primary retention mechanism isstrong cation exchange with typical samplematrices of aqueous, biological fluids.
NH2 AminopropylCarbon Loading -5% Ion Exchange Capacity- 0.8 meq/gm
40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism isweak anion exchange with typical samplematrices of water, biological fluids, andorganic extracts.
PSA Primary/SecondaryAmine
Ion Exchange Capacity- 1.4 meq/gm
40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism is weakanion exchange with aqueous samples.
DEA Diethylamino Ion Exchange Capacity- 0.9 meq/gm
40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism isweak anion exchange with aqueous samples.
N+ Quaternary Amino Ion Exchange Capacity- 0.8 meq/gm
40μm irregularly-shaped silica,60Å mean porosity.
The primary retention mechanism isstrong anion exchange with typical samplematrices of aqueous and biological fluids.
4Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 7Chromatography is our world
5
SPE Introduction
25mL
900mg Bed
600mg Bed
300mg Bed
SPE columnsOpen top tubes with male luer bottom, available with or without flangeProcess multiple samples with vacuum manifold or automated SPE instrumentsProcess individual samples manually with use of adapter and syringe
SPE 96-well platesHigh throughput SPE devices8" x 12" standard 96-well format2mL square wells
SPE cartridgesFemale luer top and male luer bottomProcess single cartridge by syringeor multiple cartridges by vacuumStack for multi-step extractions
15mL
6mL3mL
1mL
Overview of SPE Cartridges and 96-Well Plates
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Easy to use• Sample preparation in four simple steps• Reduces use of hazardous solvents by 95%
Economical, environmentally friendly• Reduces use of hazardous solvents by 95%• Reduces operator time, glassware and equipment by 83%
Reliable• Apogee offers the tightest quality control
for particle size, surface activity, pH, flow rateand interferences
• Hermetically sealed packets prevent contaminationand allow inspection of the cartridges before use
Part No. 100/box 50/box 50/box 30/box 30/box
Phase 100mg1mL
200mg3mL
500mg3mL
500mg6mL
1000mg6mL
C18 Octadecyl C18/14%C18 Octadecyl C18/18%C18 Octadecyl C18/22%C18 Octadecyl C18/OH%C8 OctylPH PhenylCH CyclohexylC4 ButylC2 EthylC1 Methyl
Price $148.00 $ 98.00 $112.00 $ 74.00 $103.00
SI Silica GelFLO FlorisilALN Alumina (Neutral)ALA Alumina (Acidic)ALB Alumina (Basic)
Price $126.00 $ 83.00 $ 98.00 $ 67.00 $ 86.00
CNe Cyanopropyl (ec)1
CN CyanopropylDIO DiolCOOH Carboxylic AcidSCX Benzenesulfonic AcidNH2 AminopropylPSA Pri/Sec AminoDEA DiethylaminoN+ Quaternary Amino
Price $178.00 $117.00 $143.00 $ 96.00 $133.00
6
SPE Cartridges and 96-Well Plates
Apogee SPE Cartidges
ANALYTEINTERFERANCE
1 CONDITION by aspirating a few milliliters of suitable solvent or solution through the column.
2 ADD SAMPLE - extract and concentrate compounds of interest by aspirating a sample solution.
3 WASH - remove co-extracted interferences by aspirating 2mL or less of suitable solvent /solution.
4 ELUTE extracted compounds by aspirating 1mL or less of suitable solvent /solution
Discard
Discard
Discard
Analyze
Need Bulk Material? Silica, C18, Florisil & many others available.Please contact Resolution Systems.
1Endcapped
Ordering Information
Empty reservoirsavailable
Use Apogee cartridges for a wide range of applications-pharmaceutical, clinical, environmental,
toxicological, biological, foods/cosmetics and agriculturall
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67IS72001 S72002 S72003 S72006 IS72007S12001 S12002 S12003 S12006 IS12007S12101 S12102 S12103 S12106 IS12107S12201 S12202 S12203 S12206 IS12207S72011 S72012 S72013 S72016 IS72017S72081 S72082 S72083 S72086 IS72087S72071 S72072 S72073 S72076 IS72077S72021 S72022 S72023 S72026 IS72027S72061 S72062 S72063 S72066 IS72067S72051 S72052 S72053 S72056 IS72057
IS72101 IS72102 IS72103 IS72106 IS72107IS72111 IS72112 IS72113 IS72116 IS72117IS72121 IS72122 IS72123 IS72126 IS72127IS72131 IS72132 IS72133 IS72136 IS72137IS72141 IS72142 IS72143 IS72146 IS72137
IS72221 IS72222 IS72223 IS72226 IS72227IS72201 IS72202 IS72203 IS72206 IS72207IS72151 IS72152 IS72153 IS72156 IS72157IS72311 IS72312 IS72313 IS72316 IS72317IS72321 IS72322 IS72323 IS72326 IS72327IS72211 IS72212 IS72213 IS72216 IS72217IS72241 IS72242 IS72243 IS72246 IS72247IS72331 IS72332 IS72333 IS72336 IS72337IS72301 IS72302 IS72303 IS72306 IS72307
67I67I67I67I67I67I67I67I67I
67I67I67I67I67I67I67I67I67I67I
67I67I67I67I67I67I67I67I67I67I
67I67I67I67I67I67I67I67I67I67I
67676767676767676767
676767676767676767
676767676767676767
676767676767676767
676767676767676767
676767676767676767
6767676767
6767676767
6767676767
6767676767
6767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com8
Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 9Chromatography is our world
7
SPE Cartridges and 96-Well Plates
96-Well PlatesSolid Phase Extraction - 96-Well Format
Economical• Prepare 96 samples at one time• Reduce use of hazardous solvents, operator time,
glassware and equipment
Reproducible• Achieve high recoveries with 2-3% coefficients of
variation
Versatile• Perform extractions with a wide variety of sorbents• Two plate sizes and a range of standard packing
amounts are available
1Condition by aspirating a fewmicroliters of suitable solventor solution through the column.
2Extract and concentratecompounds of interest byaspirating a sample solution.
Add Sample
3Remove co-extracted interfer-ences by aspirating a fewmicroliters of suitable solventor solution.
Wash
4Elute extracted compoundsby aspirating a few micro-liters of suitable solvent orsolution.
Elute
Discard
Discard
Discard
Analyze
1 Endcapped
Phase25mg1mL
50mg3mL
25mg2mL
50mg2mL
100mg2mL
200mg2mL
C18 Octadecyl C18/14% IS24050 IS24051 IS24052 IS24053 IS24054 IS24055C18 Octadecyl C18/18% IS24060 IS24061 IS24062 IS24063 IS24064 IS24065C18 Octadecyl C18/22% IS24070 IS24071 IS24072 IS24073 IS24074 IS24075C18 Octadecyl C18/OH% IS24080 IS24081 IS24082 IS24083 IS24084 IS24085C8 Octyl IS24100 IS24101 IS24102 IS24103 IS24104 IS24105PH Phenyl IS24110 IS24111 IS24112 IS24113 IS24114 IS24115CH Cyclohexyl IS24120 IS24121 IS24122 IS24123 IS24124 IS24125C4 Butyl IS24130 IS24131 IS24132 IS24133 IS24134 IS24135C2 Ethyl IS24140 IS24141 IS24142 IS24143 IS24144 IS24145C1 Methyl IS24150 IS24151 IS24152 IS24153 IS24154 IS24155CNe Cyanopropyl (ec)1 IS24160 IS24161 IS24162 IS24163 IS24164 IS24165CN Cyanopropyl IS24170 IS24171 IS24172 IS24173 IS24174 IS24175SI Silica Gel IS24180 IS24181 IS24182 IS24183 IS24184 IS24185FLO Florisil IS24190 IS24191 IS24192 IS24193 IS24194 IS24195ALN Alumina (Neutral) IS24200 IS24201 IS24202 IS24203 IS24204 IS24205ALA Alumina (Acidic) IS24210 IS24211 IS24212 IS24213 IS24214 IS24215ALB Alumina (Basic) IS24220 IS24221 IS24222 IS24223 IS24224 IS24225DIO Diol IS24230 IS24231 IS24232 IS24233 IS24234 IS24235COOH Carboxylic Acid IS24240 IS24241 IS24242 IS24243 IS24244 IS24245SCX Benzenesulfonic Acid IS24250 IS24251 IS24252 IS24253 IS24254 IS24255NH2 Aminopropyl IS24260 IS24261 IS24262 IS24263 IS24264 IS24265PSA Pri/Sec Amino IS24270 IS24271 IS24272 IS24273 IS24274 IS24275DEA Diethylamino IS24280 IS24281 IS24282 IS24283 IS24284 IS24285N+ Quaternary Amino IS24290 IS24291 IS24292 IS24293 IS24294 IS24295Price $229.00 $253.00 $241.00 $266.00 $278.00 $290.00
Ordering Information
Condition
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67676767 676767676767 67
06767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 676767676767 67
67
9
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com10Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
solid phase extraction cartridges allow forseparations by reverse phase, normal phase, anionexchange, cation exchange and mixed modes.
The diagram below is intended to simplify the process ofselecting the right SPE product for your application.
Chromatography is our world
8
General SPE Methods
N,PLUS, N, MAX, MCX,WAX, WCX,
64245
Lm0.3/gm06XCM
SampleMatrix
AnalyteSolubility
AnalyteCharge
SeparationMode
RecommendedCartridge
Aqueous
Organic
Neu Ilart onic
Organic
CationExchange
CationExchange
Aqueous
Ionic
AnionExchange
MCX N
ReversePhase
PLUS
ReversePhase
Neutral
NormalPhase
Neutral
Organic
MAX
AnionExchange
MCXMAXN
NWCX WAXWAX WCX
SPE Polymer Phase Selection
SPE Method Development
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
The nexT geneRaTIOnOf Sample pRepaRaTIOn
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 11Chromatography is our world
9
SPE Method Development
Choosing the Right Cartridges
Cartridge Size —Sample Capacity
Sizes: 1 mL, 3 mL, 6 mL, 60 mL(Specialty sizes available upon request)The SPE Cartidge determines the volume of the sample solution, which can be loaded onto the sorbent bed in a single step.
Resin Bed Mass—Analyte Capacity
Sizes: 10 mg, 30 mg, 60 mg, 200 mg, 1 g (Specialty bed weights available upon request)The resin bed mass determines the maximum amount of analyte retained by the sorbent.
Tips: Choosing the proper bed mass reduces leaching of sample components
Tips for Choosing Proper Resin Mass
Polymeric Sorbents—polymeric resins provide largersurface area than silica-based resins, offering higher capacity on the order of 10-15% of the resin mass. Thisallows for the use of smaller bed volumes and improved detection limts.
Ion Exchange Sorbents—the number of charged sites on the resin available to interact with the analyte determines capacity.Tip: Choosing a slightly larger resin mass is advisable, since mostSPE samples are loaded with contaminants and interferences
Pore Size—the mean diameter of the pores on the sorbent particle surface
The analyte molecule in an SPE method should t easily through the pores of the sorbent (i.e. for largemolecules, a sorbent particle with extra large pores should be selected).
Resin Bed Volume—Interstitial and Pore Volume
The resin bed volume controls the minimum solventvolume in an SPE method. To successfully condition,wash and elute from the cartridge typically requiressolvent volumes 4 to 8 times that of the sorbent bed.Using less than 4 to 8 sorbent bed volumes contributes toincomplete solvation and low, inconsistent recoveries.
Tips: Polymeric SPE products usually require 200-250 uL per 100mg of sorbent.
100% Divinyl Benzene Bead 104Å
6424
5L
m0.3
/gm0
6 XC
M
*Polymeric gels provide largersurface area that requires largersolvent volumes per gram ofsorbent. Elution volumes depend on thechemical nature of the analyte,its relative concentration in thematrix, the chemistry of thesolution solvent and the sorbentbed mass. This table outlines ageneric SPE method.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
The nexT geneRaTIOnOf Sample pRepaRaTIOn
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com12Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
10
SPE Method Development
MethodologyNormal-Phase Concepts
Normal-Phase
N
O
RR
HO
Phenol
N,
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 13Chromatography is our world
11
SPE Method Development
MethodologyIon Exchange Concepts
Ion Exchange
Acetominophen
Sodium Salicylate N+
R3
R2 R1
O-O
OH
+H2N
H3C
O
SO3-
-
WAX,WCX
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
The nexT geneRaTIOn Of Sample pRepaRaTIOn
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com14Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
12
SPE Method Development
-
-
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
The nexT geneRaTIOn Of Sample pRepaRaTIOn
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 15Chromatography is our world
13
Ordering Information96-Well Plates
Ordering InformationCartridges
Description Qty Part No. Price
30mg/1mL 100 − 74261 $156.00
50mg/1mL 100 − 74262 $227.00
100mg/1mL 100 − 74263 $389.00
60mg/3mL 50 − 74246 $120.00
100mg/3mL 50 74264 $195.00
200mg/3mL 50 74265 $346.00
60mg/6mL 30 74247 $346.00
200mg/6mL 30 74245 $220.00
500mg/6mL 30 74266 $544.00
Description Qty Part No. Price
10mg/1mL 1 10011 $300.00
25mg/1mL 1 24340 $309.00
30mg/1mL 1 10031 $300.00
50mg/1mL 1 24341 $352.00
60mg/1mL 1 10061 $342.00
25mg/2mL 1 24342 $321.00
30mg/2mL 1 10032 $312.00
60mg/2mL 1 10062 $35400
50mg/3mL 1 24343 $364.00
100mg/3mL 1 24344 $463.00
SPE Method Development
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67−67−67−67−67−67676767
67−67−67−67−67−67−67−67−67−
67−
is
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com16Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
14
SPE
Part No. Description Qty(Box) Price
67– 44247 N 60mg/6.0mL 25-35μ \30 $158
44262 N 50mg/1.0mL 25-35μ \100 $228
44263 Apogee N 100mg/1.0mL 25-35μ \100 $281
44264 Apogee N 100mg/3.0mL 25-35μ \100 $281
44265 Apogee N 200mg/3.0mL 25-35μm \100 $292
44266 N 500mg/6.0mL 25-35μm \30 $226
44444 N 60mg/1.0mL 25-35μ \100 $270
44445 N 200mg/6.0mL 25-35μ \30 $204
44446 N 60mg/3.0mL 25-35μ \100 $275
44453 N 500mg/3.0mL 25-35μ \50 $325
44460 N 10mg/1.0mL 25-35μ \100 $193
44461 N 30mg/1.0mL 25-35μ \100 $204
44462 N 30mg/3.0mL 25-35μ \100 $275
44467 N 1000mg/60.0mL 25-35μ \10 $138
44468 N 10mg/1.0cc 55-65μ, 80A \100 $193
44469 N 30mg/1.0cc 55-65μ, 80A \100 $204
44470 N 60mg/1.0cc 55-65μ, 80A \100 $270
44471 N 100mg/1.0cc 55-65μ, 80A \100 $281
44472 N 60mg/3.0cc 55-65μ, 80A \100 $275
44473 N 200mg/3.0cc 55-65μ, 80A \100 $292
44474 N 500mg/3.0cc 55-65μ, 80A \50 $325
44475 N 200mg/6.0cc 55-65μ, 80A \30 $204
44476 N 500mg/6.0cc 55-65μ, 80A \30 $226
44477 N 1000mg/6.0cc 55-65μ, 80A \10 $138
44478 N 10000mg/6.0cc 55-65μ, 80A \5 $402
Ordering InformationN SPE Cartridges
Part No. Description Qty Price
96441 N 96 Well 10mg/1mL 25-35μ \ 1 $308
96442 N 96 Well 25mg/1mL 25-35μ \1 $319
96443 N 96 Well 30mg/1mL 25-35μ \1 $325
96444 N 96 Well 50mg/1mL 25-35μ \1 $336
96445 N 96 Well 60mg/1mL 25-35μ \1 $352
96446 N 96 Well 25mg/2mL 25-35μ \1 $341
96447 N 96 Well 30mg/2mL 25-35μ \1 $352
96448 N 96 Well 60mg/2mL 25-35μ \1 $363
96449 N 96 Well 10mg/1mL 55-65μ, 80A \1 $308
96450 N 96 Well 25mg/1mL 55-65μ, 80A \1 $319
96451 N 96 Well 30mg/1mL 55-65μ, 80A \1 $325
96452 N 96 Well 50mg/1mL 55-65μ, 80A \1 $336
96453 N 96 Well 60mg/1mL 55-65μ, 80A \1 $352
96454 N 96 Well 25mg/2mL 55-65μ, 80A \1 $341
96455 N 96 Well 30mg/2mL 55-65μ, 80A \1 $352
96456 N 96 Well 60mg/2mL 55-65μ, 80A \1 $363
Part No. Description Qty(Box) Price
54247 \30 $21354262 \100 $26854263 \100 $28154264 \100 $28154265 \100 $29254266 \30 $22654444 \100 $27054445 \30 $20454446 \100 $27554453 \50 $32554460 \100 $19354461 \100 $20454462 \100 $2754467 \10 $138
54468 \100 $19354469 \100 $20454470 \100 $2704471 \100 $2814472 \100 $2754473 \100 $2924474 \50 $3254475 \30 $2044476 \30 $2264477 \10 $1384478 \5 $402
Part No. Description Qty Price
96541 MCX 96 Well 10mg/1mL 25-35μ \1 $308
96542 MCX 96 Well 25mg/1mL 25-35μ \1 $319
96543 MCX 96 Well 30mg/1mL 25-35μ \1 $325
96544 MCX 96 Well 50mg/1mL 25-35μ \1 $336
96545 MCX 96 Well 60mg/1mL 25-35μ \1 $352
96546 MCX 96 Well 25mg/2mL 25-35μ \1 $341
96547 MCX 96 Well 30mg/2mL 25-35μ \1 $352
96548 MCX 96 Well 60mg/2mL 25-35μ \1 $363
96549 MCX 96 Well 10mg/1mL 55-65μ, 80A \1 $308
96550 MCX 96 Well 25mg/1mL 55-65μ, 80A \1 $319
96551 MCX 96 Well 30mg/1mL 55-65μ, 80A \1 $325
96552 MCX 96 Well 50mg/1mL 55-65μ, 80A \1 $336
96553 MCX 96 Well 60mg/1mL 55-65μ, 80A \1 $352
96554 MCX 96 Well 25mg/2mL 55-65μ, 80A \1 $341
96555 MCX 96 Well 30mg/2mL 55-65μ, 80A \1 $352
96556 MCX 96 Well 60mg/2mL 55-65μ, 80A \1 $363
Ordering InformationMCX SPE Cartridges
Ordering InformationN 96-Well Plates
Ordering InformationMCX 96-Well Plates
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–
ApogeeApogee
ApogeeApogeeApogee
ApogeeApogee
Apogee
ApogeeApogeeApogee
ApogeeApogee
ApogeeApogee
ApogeeApogeeApogee
ApogeeApogee
ApogeeApogee
67–
ApogeeApogeeApogee
67–67–67–67–
ApogeeApogee MCX 60mg/6.0mL 25-35μ
MCX 50mg/1.0mL 25-35μ MCX 100mg/1.0mL 25-35μ
MCX 100mg/3.0mL 25-35μ MCX 200mg/3.0mL 25-35μ
MCX 500mg/6.0mL 25-35μ MCX 60mg/1.0mL 25-35μMCX 200mg/6.0mL 25-35μ
MCX 60mg/3.0mL 25-35μMCX 500mg/3.0mL 25-35μMCX 10mg/1.0mL 25-35μ MCX 30mg/1.0mL 25-35μ MCX 30mg/3.0mL 25-35μ MCX 1000mg/60.0mL 25-35μ MCX 10mg/1.0cc 55-65μ, 80A MCX 30mg/1.0cc 55-65μ, 80AMCX 60mg/1.0cc 55-65μ, 80A
MCX 100mg/1.0cc 55-65μ, 80A MCX 60mg/3.0cc 55-65μ, 80A MCX 200mg/3.0cc 55-65μ, 80A MCX 500mg/3.0cc 55-65μ, 80A MCX 200mg/6.0cc 55-65μ, 80A MCX 500mg/6.0cc 55-65μ, 80A MCX 1000mg/60.0cc 55-65μ, 80A MCX 10000mg/60.0cc 55-65μ, 80A
67–
ApogeeApogeeApogee
67–67–67–67–
ApogeeApogee
67–
ApogeeApogeeApogee
67–67–67–67–
ApogeeApogee
67–
ApogeeApogeeApogee
67–67–67–67–
ApogeeApogee
67–
ApogeeApogeeApogee
67–67–67–67–
ApogeeApogee
67–
ApogeeApogeeApogee
67–67–67–67–
ApogeeApogee
67–
ApogeeApogeeApogee
67–67–67–67–
ApogeeApogee
67– Apogee
ApogeeApogeeApogee
67–67–67–67–
Apogee
67– Apogee
67–
ApogeeApogeeApogee
67–67–67–67–
ApogeeApogee
67–
ApogeeApogeeApogee
67–67–67–67–
ApogeeApogee
67– Apogee
ApogeeApogeeApogee
67–67–67–67–
Apogee
67– Apogee
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 17Chromatography is our world
15
SPE
Part No Description Qty(Box) Price
64247 MAX 60mg/6.0mL 25-35μ \30 $213
64262 MAX 50mg/1.0mL 25-35μ \100 $268
64263 MAX 100mg/1.0mL 25-35μ \100 $281
64264 MAX 100mg/3mL 25-35μ \100 $281
64265 MAX 200mg/3.0mL 25-35μ \100 $292
64266 MAX 500mg/6.0mL 25-35μ \30 $226
64444 MAX 60mg/1.0mL 25-35μ \100 $270
64445 MAX 200mg/6.0mL 25-35μ \30 $204
64446 MAX 60mg/3.0mL 25-35μ \100 $275
64453 MAX 500mg/3.0mL 25-35μ \50 $325
64460 MAX 10mg/1.0mL 25-35μ \100 $193
64461 MAX 30mg/1.0mL 25-35μ \100 $204
64462 MAX 30mg/3.0mL 25-35μ \100 $275
64467 MAX 1000mg/60.0mL 25-35μ \10 $138
64468 MAX 10mg/1.0cc 55-65μ, 80A \100 $193
64469 MAX 30mg/1.0cc 55-65μ, 80A \100 $204
64470 MAX 60mg/1.0cc 55-65μ, 80A \100 $270
64471 MAX 100mg/1.0cc 55-65μ, 80A \100 $281
64472 MAX 60mg/3.0cc 55-65μ, 80A \100 $275
64473 MAX 200mg/3.0cc 55-65μ, 80A \100 $292
64474 MAX 500mg/3.0cc 55-65μ, 80A \50 $325
64475 MAX 200mg/6.0cc 55-65μ, 80A \30 $204
64476 MAX 500mg/6.0cc 55-65μ, 80A \30 $226
64477 MAX 1000mg/60.0cc 55-65μ, 80A \10 $138
64478 AX 10000mg/60.0cc 55-65μ, 80A \5 $402
64479 MAX 200mg/10mL 25-35μ, 80A \30 $248
Part No Description Qty Price
96641 MAX 96 Well 10mg/1mL 25-35μ \1 $308
96642 MAX 96 Well 25mg/1mL 25-35μ \1 $319
96643 MAX 96 Well 30mg/1mL 25-35μ \1 $325
96644 MAX 96 Well 50mg/1mL 25-35μ \1 $336
96645 MAX 96 Well 60mg/1mL 25-35μ \1 $352
96646 MAX 96 Well 25mg/2mL 25-35μ \1 $341
96647 MAX 96 Well 30mg/2mL 25-35μ \1 $352
96648 MAX 96 Well 60mg/2mL 25-35μ \1 $363
96649 MAX 96 Well 10mg/1mL 55-65μ, 80A \1 $308
96650 MAX 96 Well 25mg/1mL 55-65μ, 80A \1 $319
96651 MAX 96 Well 30mg/1mL 55-65μ, 80A \1 $325
96652 MAX 96 Well 50mg/1mL 55-65μ, 80A \1 $336
96653 MAX 96 Well 60mg/1mL 55-65μ, 80A \1 $352
96654 MAX 96 Well 25mg/2mL 55-65μ, 80A \1 $341
96655 MAX 96 Well 30mg/2mL 55-65μ, 80A \1 $352
96656 MAX 96 Well 60mg/2mL 55-65μ, 80A \1 $363
Part No Description Qty(Box) Price
34247 \30 $158
34262 \ 100 $228
34263 \ 100 $226
34264 \ 100 $253
34265 \ 100 $264
34266 \30 $215
34444 \ 100 $215
34445 \30 $171
34446 \ 100 $248
34453 \50 $297
34460 \ 100 $160
34461 \ 100 $171
34462 \ 100 $248
34467 \10 $132
34468 \ 100 $160
34469 \ 100 $171
34470 \ 100 $215
34471 \ 100 $226
34472 \ 100 $248
34474 \50 $297
34475 \30 $171
34476 \30 $215
34477 \10 $132
34478 \5 $385
Part No Description Qty Price
96341 PLUS 96 Well 10mg/1mL 25-35μ \1 $303
96342 PLUS 96 Well 25mg/1mL 25-35μ \1 $314
96343 PLUS 96 Well 30mg/1mL 25-35μ \1 $319
96344 PLUS 96 Well 50mg/1mL 25-35μ \1 $330
96345 PLUS 96 Well 60mg/1mL 25-35μ \1 $347
96346 PLUS 96 Well 25mg/2mL 25-35μ \1 $330
96347 PLUS 96 Well 30mg/2mL 25-35μ \1 $347
96348 PLUS 96 Well 60mg/2mL 25-35μ \1 $358
96349 PLUS 96 Well 10mg/1mL 25-35μ \1 $303
96350 PLUS 96 Well 25mg/1mL 25-35μ \1 $314
96351 PLUS 96 Well 30mg/1mL 25-35μ \1 $319
96352 PLUS 96 Well 50mg/1mL 25-35μ \1 $330
96353 PLUS 96 Well 60mg/1mL 25-35μ \1 $347
96354 PLUS 96 Well 25mg/2mL 25-35μ \1 $330
96355 PLUS 96 Well 30mg/2mL 25-35μ \1 $347
96356 PLUS 96 Well 60mg/2mL 25-35μ \1 $358
Ordering InformationMAX SPE Cartridges
Ordering InformationPLUS SPE Cartridges
Ordering InformationMAX 96-Well Plates
Ordering InformationPLUS 96-Well Plates
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
PLUS 60mg/6.0mL 25-35μ PLUS 50mg/1.0mL 25-35μ PLUS 100mg/1.0mL 25-35μ PLUS 100mg/3.0mL 25-35μ PLUS 200mg/3.0mL 25-35μ PLUS 500mg/6.0mL 25-35μm PLUS 60mg/1.0mL 25-35μ PLUS 200mg/6.0mL 25-35μ PLUS 60mg/3.0mL 25-35μ PLUS 500mg/3.0mL 25-35μ PLUS 10mg/1.0mL 25-35μ PLUS 30mg/1.0mL 25-35μ PLUS 30mg/3.0mL 25-35μ PLUS 1000mg/60.0mL 25-35μ PLUS 10mg/1.0cc 55-65μ, 80A PLUS 30mg/1.0cc 55-65μ, 80A PLUS 60mg/1.0cc 55-65μ, 80A PLUS 100mg/1.0cc 55-65μ, 80A PLUS 60mg/3.0cc 55-65μ, 80A PLUS 500mg/3.0cc 55-65μ, 80A PLUS 200mg/6.0cc 55-65μ, 80A PLUS 500mg/6.0cc 55-65μ, 80A PLUS 1000mg/60.0cc 55-65μ, 80A PLUS 10000mg/60.0cc 55-65μ, 80A
67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee67– Apogee
67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–
67–67–67–67–67–67–67–67–67–
67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–
67–67–67–67–67–67–67–
ApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogee
ApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogee
ApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogee
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com18Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
16
SPE
Part No Description Qty(Box) Price
86011 WAX 10mg/1.0mL 25-35μ \100 $193
86012 WAX 30mg/1.0mL 25-35μ \100 $204
86013 WAX 60mg/1.0mL 25-35μ \100 $270
86014 WAX 100mg/1mL 25-35μ \100 $281
86015 WAX 60mg/3mL 25-35μ \100 $275
86016 WAX 200mg/3mL 25-35μ \100 $292
86017 WAX 500mg/3mL 25-35μ \50 $325
86018 WAX 200mg/6mL 25-35μ \30 $204
86019 WAX 500mg/6mL 25-35μ \30 $226
86020 WAX 1000mg/60mL 25-35μ \10 $138
86021 WAX 10000mg/60mL 25-35μ \5 $402
86000 WAX 10mg/1.0cc 55-65μ, 80A \100 $193
86001 WAX 30mg/1.0cc 55-65μ, 80A \100 $204
86002 WAX 60mg/1.0cc 55-65μ, 80A \100 $270
86003 WAX 100mg/1.0cc 55-65μ, 80A \100 $281
86004 WAX 60mg/3.0cc 55-65μ, 80A \100 $275
86005 WAX 200mg/3.0cc 55-65μ, 80A \100 $292
86006 WAX 500mg/3.0cc 55-65μ, 80A \50 $325
86007 WAX 200mg/6.0cc 55-65μ, 80A \30 $204
86008 WAX 500mg/6.0cc 55-65μ, 80A \30 $226
86009 WAX 1000mg/60mL 25-35μ \10 $138
86010 WAX 10000mg/60.0cc 55-65μ, 80A \5 $402
Part No. Description Qty Price
97508 WAX 96 Well 10mg/1mL 25-35μ \1 $308
97509 WAX 96 Well 25mg/1mL 25-35μ \1 $319
97510 WAX 96 Well 30mg/1mL 25-35μ \1 $325
97511 WAX 96 Well 50mg/1mL 25-35μ \1 $336
97512 WAX 96 Well 60mg/1mL 25-35μ \1 $352
97513 WAX 96 Well 25mg/2mL 25-35μ \1 $341
97514 WAX 96 Well 30mg/2mL 25-35μ \1 $352
97515 WAX 96 Well 60mg/2mL 25-35μ \1 $363
97500 WAX 96 Well 10mg/1mL 55-65μ, 80A \1 $308
97501 MAX 96 Well 25mg/1mL 55-65μ, 80A \1 $319
97502 MAX 96 Well 30mg/1mL 55-65μ, 80A \1 $325
97503 MAX 96 Well 50mg/1mL 55-65μ, 80A \1 $336
97504 MAX 96 Well 60mg/1mL 55-65μ, 80A \1 $352
97505 MAX 96 Well 25mg/2mL 55-65μ, 80A \1 $341
97506 MAX 96 Well 30mg/2mL 55-65μ, 80A \1 $352
97507 MAX 96 Well 60mg/2mL 55-65μ, 80A \1 $363
Part No. Description Qty(Box) Price
84012 WCX 10mg/1.0mL 25-35μ \100 $193
84013 WCX 30mg/1.0mL 25-35μ \100 $204
84014 WCX 60mg/1.0mL 25-35μ \100 $270
84015 WCX 100mg/1mL 25-35μ \100 $281
84016 WCX 60mg/3mL 25-35μ \100 $275
84017 WCX 200mg/3mL 25-35μ \100 $292
84018 WCX 500mg/3mL 25-35μ \50 $325
84019 WCX 200mg/6mL 25-35μ \30 $204
84020 WCX 500mg/6mL 25-35μ \30 $226
84021 WCX 1000mg/60mL 25-35μ \10 $138
84022 WCX 10000mg/60mL 25-35μ \5 $402
84001 WCX 10mg/1.0cc 55-65μ, 80A \100 $193
84002 WCX 30mg/1.0cc 55-65μ, 80A \100 $204
84003 WCX 60mg/1.0cc 55-65μ, 80A \100 $270
84004 WCX 100mg/1.0cc 55-65μ, 80A \100 $281
84005 WCX 60mg/3.0cc 55-65μ, 80A \100 $275
84006 WCX 200mg/3.0cc 55-65μ, 80A \100 $292
84007 WCX 500mg/3.0cc 55-65μ, 80A \50 $325
84008 WCX 200mg/6.0cc 55-65μ, 80A \30 $204
84009 WCX 500mg/6.0cc 55-65μ, 80A \30 $226
84010 WCX 1000mg/60mL 25-35μ \10 $138
84011 WCX 10000mg/60.0cc 55-65μ, 80A \5 $402
Part No. Description Qty Price
97008 WCX 96 Well 10mg/1mL 25-35μ \1 $308
97009 WCX 96 Well 25mg/1mL 25-35μ \1 $319
97010 WCX 96 Well 30mg/1mL 25-35μ \1 $325
97011 WCX 96 Well 50mg/1mL 25-35μ \1 $336
97012 WCX 96 Well 60mg/1mL 25-35μ \1 $352
97013 WCX 96 Well 25mg/2mL 25-35μ \1 $341
97014 WCX 96 Well 30mg/2mL 25-35μ \1 $352
97015 WCX 96 Well 60mg/2mL 25-35μ \1 $363
97000 WCX 96 Well 10mg/1mL 55-65μ, 80A \1 $308
97001 WCX 96 Well 25mg/1mL 55-65μ, 80A \1 $319
97002 WCX 96 Well 30mg/1mL 55-65μ, 80A \1 $325
97003 WCX 96 Well 50mg/1mL 55-65μ, 80A \1 $336
97004 WCX 96 Well 60mg/1mL 55-65μ, 80A \1 $352
97005 WCX 96 Well 25mg/2mL 55-65μ, 80A \1 $341
97006 WCX 96 Well 30mg/2mL 55-65μ, 80A \1 $352
97007 WCX 96 Well 60mg/2mL 55-65μ, 80A \1 $363
Ordering InformationWAX SPE Cartridges
Ordering InformationWCX SPE Cartridges
WAX 96-Well PlatesOrdering Information
WCX 96-Well Plates
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–
67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–
67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–
67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–67–
ApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogee
ApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogee
Ordering Information
ApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogee
ApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogeeApogee
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 19
uSPE technology
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing MatsSa
mpl
e H
andl
ing
- Via
ls, C
aps,
Inse
rts,
96
Wel
l Pla
tes,
Sea
ling
Mat
s
42
Resolution Systems)
OUR
OUR
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com20Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing MatsSa
mpl
e H
andl
ing
- Via
ls, C
aps,
Inse
rts,
96
Wel
l Pla
tes,
Sea
ling
Mat
s
443Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
Sample H
andling - Vials, Caps, Inserts, 96 W
ell Plates, Sealing Mats
TM TM
TM
www.resolutionsys.com
Resolution Systems
CEREXTM uSPE (ultraSPE)Silica Sorbents
Bio-anaylitical | Pharmaceutical and Environmental
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 21
3Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing MatsSam
ple Handling
- Vials, Caps, Inserts, 96 Well Plates, Sealing M
ats
43
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com22Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
CEREXTM uSPE (ultraSPE)Faster / Cleaner Sample PreparationBio-anaylitical | Pharmaceutical and Environmental
3Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
Sample H
andling - Vials, Caps, Inserts, 96 W
ell Plates, Sealing Mats
45
www.resolutionsys.com
TM
TM
Ordering InformationCEREX™ uSPE Products
1ml (100/box) 3ml (50/box) 6ml (30/box)
Sorbent Mass 20mg 35mg 20mg 35mg 100mg 150mg 20mg 35mg 100mg 150mg 350 mg 650mgPNP (710 - ) 0201 0351 0203 0353 1003 1503 0206 0356 1006 1505 3506 6506PCX (709 - ) 0201 0351 0203 0353 1003 1503 0206 0356 1006 1506 3506 65068CX (722 -) 0201 0351 0203 0353 1003 1503 0206 0356 1006 1506 3506 65068AX (723 - ) 0201 0351 0203 0353 1003 1503 0206 0356 1006 1506 3506 6506
15ml (20/box) 25ml (20/box) 96 Well Plates
Sorbent Mass 350mg 650mg 350mg Plate Populated Plate 96 Rimless TubesPNP (710 - ) 3507 6507 3508 0096 0201RH 0201RPCX (709 - ) 3507 6507 3508 0096 0201RH 0201R8CX (722 -) 3507 6507 3508 0096 0201RH 0201R8AX (723 - ) 3507 6507 3508 0096 0201RH 0201R
3Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
Sample H
andling - Vials, Caps, Inserts, 96 W
ell Plates, Sealing Mats
45
www.resolutionsys.com
TM
TM
3Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
Sample H
andling - Vials, Caps, Inserts, 96 W
ell Plates, Sealing Mats
45
www.resolutionsys.com
TM
TM
3Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
Sample H
andling - Vials, Caps, Inserts, 96 W
ell Plates, Sealing Mats
45
www.resolutionsys.com
TM
TM
3Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
Sample H
andling - Vials, Caps, Inserts, 96 W
ell Plates, Sealing Mats
45
www.resolutionsys.com
TM
TM
3Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
Sample H
andling - Vials, Caps, Inserts, 96 W
ell Plates, Sealing Mats
45
www.resolutionsys.com
TM
TM
Ordering Information
600-0096 C18 Heavy Load, Octadecyl 20mg/1mL, 96-well block 319.44
600-0201 C18 Heavy Load, Octadecyl 20mg/1 mL, Box of 100 173.03
600-0201R C18 Heavy Load, Octadecyl 20mg/1mL, 96 rimless 259.55
600-0201RH C18 Heavy Load, Octadecyl 20mg/1mL, 96 rimless/holder 306.13
600-0203 C18 Heavy Load, Octadecyl 20mg/3mL, Box of 50 86.52
600-0206 C18 Heavy Load, Octadecyl 20mg/6mL, Box of 30 55.90
600-0351 C18 Heavy Load, Octadecyl 35mg/1ml, Box of 100 186.34
600-0353 C18 Heavy Load, Octadecyl 35mg/3mL, Box of 50 93.17
600-0356 C18 Heavy Load, Octadecyl 35mg/6mL, Box of 30 62.56
600-1003 C18 Heavy Load, Octadecyl 100mg/3mL, Box of 50 117.13
600-1006 C18 Heavy Load, Octadecyl 100mg/6mL, Box of 30 74.54
600-1503 C18 Heavy Load, Octadecyl 150mg/3mL, Box of 50 133.1
600-1506 C18 Heavy Load, Octadecyl 150mg/6mL, Box of 30 90.51
600-3506 C18 Heavy Load, Octadecyl 350mg/6mL, Box of 30 130.44
600-6506 C18 Heavy Load, Octadecyl 650mg/6mL, Box of 30 190.33
601-0096 C18 Light Load, Octadecyl 20mg/1mL, 96-well block 319.44
601-0201 C18 Light Load, Octadecyl 20mg/1mL, Box of 100 173.03
601-0201R C18 Light Load, Octadecyl 20mg/1mL, 96 rimless 259.55
601-0201RH C18 Light Load, Octadecyl 20mg/1mL, 96 rimless/holder 306.13
601-0203 C18 Light Load, Octadecyl 20mg/3mL, Box of 50 86.52
601-0206 C18 Light Load, Octadecyl 20mg/6mL, Box of 30 55.90
601-0351 C18 Light Load, Octadecyl 35mg/1mL, Box of 100 186.34
Part Number Phase Description Price Part Number Phase Description Price
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 23
601-0353 C18 Light Load, Octadecyl 35mg/3mL, Box of 50 93.17
601-0356 C18 Light Load, Octadecyl 35mg/6mL, Box of 30 62.56
601-1003 C18 Light Load, Octadecyl l00mg/3mL, Box of 50 117.13
601-1006 C18 Light Load, Octadecyl 100mg/6mL, Box of 30 74.54
601-1503 C18 Light Load, Octadecyl 150mg/3mL, Box of 50 133.1
601-1506 C18 Light Load, Octadecyl 150mg/6mL, Box of 30 90.51
601-3506 C18 Light Load, Octadecyl 350mg/6mL, Box of 30 130.44
601-6506 C18 Light Load, Octadecyl 650mg/6mL, Box of 30 173.03
602-0096 C18 No Capping, Octadecyl 20mg/1mL, 96-well block 319.44
602-0201 C18 No Capping, Octadecyl 20mg/1 mL, Box of 100 173.03
602-0201R C18 No Capping, Octadecyl 20mg/1mL, 96 rimless 259.55
602-0201RH C18 No Capping, Octadecyl 20mg/1mL, 96 rimless/holder 306.13
602-0203 C18 No Capping, Octadecyl 20mg/3mL, Box of 50 86.52
602-0206 C18 No Capping, Ocladecyl 20mg/6mL, Box of 30 55.90
602-0351 C18 No Capping, Octadecyl 35mgMmL, Box of 100 186.34
602-0353 C18 No Capping, Octadecyl 35mg/3ml, Box of 50 93.17
602-0356 C18 No Capping, Octadecyl 35mg/6mL, Box of 30 86.52
602-1003 C18 No Capping, Octadecyl 100mg/3mL, Box of 50 117.13
602-1006 C18 No Capping, Octadecyl 100mg/6mL, Box of 30 74.54
602-3506 C18 No Capping, Octadecyl 350mg/6mL, Box of 30 130.44
602-6506 C18 No Capping, Octadecyl 650mg/6mL, Box of 30 190.33
603-0096 C8 Octyl 20mg/1mL, 96-well block 319.44
603-0201 C8 Octyl 20mg/1mL. Box of 100 173.03
603-0201R C8 Octyl 20mg/1mL, 96 rimless 259.55
603-0201RH C8 Octyl 20mg/1mL, 96 rimless/holder 306.13
603-0203 C8 Octyl 20mg/3mL, Box of 50 86.52
603-0206 C8 Octyl 20mg/6mL, Box of 30 55.90
603-0351 C8 Octyl 35mg/1mL, Box of 100 186.34
603-0353 C8 Octyl 35mg/3mL, Box of 50 93.17
603-0356 C8 Octyl 35mg/6mL, Box of 30 62.56
603-1003 C8 Octyl 100mg/3mL, Box of 50 117.13
603-1006 C8 Octyl 100mg/6mL, Box of 30 74.54
603-1503 C8 Octyl 150mg/3mL, Box of 50 133.1
603-1506 C8 Octyl 150mg/6mL, Box of 30 90.51
603-3506 C8 Octyl 350mg/6mL, Box of 30 130.44
603-6506 C8 Octyl 650mg/6mL, Box of 30 190.33
604-0096 C2 Ethyl 20mg/1mL, 96-well block 319.44
604-0201 C2 Ethyl 20mg/1 mL, Box of 100 190.33
604-0201R C2 Ethyl 20mg/1mL, 96 rimless 259.55
604-0201RH C2 Ethyl 20mg/1mL, 96 rimless/holder 306.13
604-0203 C2 Ethyl 20mg/3mL, Box of 50 86.52
604-0206 C2 Ethyl 20mg/6mL, Box of 30 55.90
604-0351 C2 Ethyl 35mg/1mL, Box of 100 186.34
604-0353 C2 Ethyl 35mg/3mL, Box of 50 93.17
604-0356 C2 Ethyl 35mg/6mL, Box of 30 62.56
604-1003 C2 Ethyl l00mg/3mL, Box of 50 117.13
604-1006 C2 Ethyl 100mg/6mL, Box of 30 74.54
604-1503 C2 Ethyl 150mg/3mL, Box of 50 133.1
604-1506 C2 Ethyl 150mg/6mL, Box of 30 90.51
604-3506 C2 Ethyl 350mg/6mL, Box of 30 130.44
604-6506 C2 Ethyl 650mg/6mL, Box of 30 190.33
605-0096 CN Cyanopropyl 20mg/1mL, 96-well block 319.44
605-0201 CN Cyanopropyl 20mg/1 mL, Box of 100 212.96
605-0201R CN Cyanopropyl 20mg/1mL, 96 rimless 259.55
605-0201RH CN Cyanopropyl 20mg/1mL, 96 rimless/holder 306.13
605-0203 CN Cyanopropyl 20mg/3mL, Box of 50 113.14
605-0206 CN Cyanopropyl 20mg/6mL, Box of 30 71.87
605-0351 CN Cyanopropyl 35mg/1mL, Box of 100 232.93
605-0353 CN Cyanopropyl 35mg/3mL, Box of 50 119.79
605-0356 CN Cyanopropyl 35mg/6mL, Box of 30 74.54
605-1003 CN Cyanopropyl 100mg/3mL, Box of 50 139.76
605-1006 CN Cyanopropyl 100mg/6mL, Box of 30 91.84
605-1503 CN Cyanopropyl 50mg/3mL, Box of 50 166.38
605-1506 CN Cyanopropyl 50mg/6mL, Box of 30 106.48
605-3506 CN Cyanopropyl 350mg/6mL, Box of 30 166.38
605-6506 CN Cyanopropyl 650mg/6mL, Box of 30 199.65
606-0096 PH Phenyl 20mg/1mL, 96-well block 319.44
606-0201 PH Phenyl 20mg/1 mL, Box of 100 173.03
606-0201R PH Phenyl 20mg/1mL, 96 rimless 259.55
606-0201RH PH Phenyl 20mg/1mL, 96 rimless/holder 306.13
606-0203 PH Phenyl 20mg/3mL, Box of 50 86.52
606-0206 PH Phenyl 20mg/6mL, Box of 30 55.90
606-0351 PH Phenyl 35mg/1mL, Box of 100 186.34
606-0353 PH Phenyl 35mg/3mL, Box of 50 93.17
606-0356 PH Phenyl 35mg/6mL, Box of 30 62.56
606-1003 PH Phenyl 100mg/3mL, Box of 50 117.13
606-1006 PH Phenyl 100 mg/6ml, Box of 30 74.54
606-1503 PH Phenyl 150mg/3mL, Box of 50 133.1
606-1506 C4 Butyl 150mg/6mL, Box of 30 87.85
606-1506 PH Phenyl 150 mg/6ml, Box of 30 90.51
606-3506 PH Phenyl 350mg/6mL, Box of 30 130.44
606-6506 PH Phenyl 650mg/6mL, Box of 30 190.33
608-0201RH C4 Butyl 20mg/1mL, 96 rimless/holder 306.13
608-0206 C4 Butyl 20mg/6mL, Box of 30 55.90
608-0351 C4 Butyl 35mg/1mL, Box of 100 186.34
608-0353 C4 Butyl 35mg/3mL, Box of 50 93.17
608-0356 C4 Butyl 35mg/6mL, Box of 30 62.56
608-1003 C4 Butyl 100mg/3mL, Box of 50 117.13
608-1006 C4 Butyl 100mg/6mL, Box of 30 74.54
608-1503 C4 Butyl 150mg/3mL, Box of 50 133.1
608-3506 C4 Butyl 350mg/6mL, Box of 30 130.44
608-6506 C4 Butyl 650mg/6mL, Box of 30 190.33
609-0096 C8 No Capping, Octyl 20mg/1ml, 96-well block 319.44
609-0201 C8 No Capping, Octyl 20mg/1 mL, Box of 100 173.03
609-0201R C8 No Capping, Octyl 20mg/1mL, 96 rimless 259.55
609-0201RH C8 No Capping, Octyl 20mg/1mL, 96 rimless/holder 306.13
Part Number Phase Description Price Part Number Phase Description Price
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com24Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
609-0203 C8 No Capping, Octyl 20mg/3mL, Box of 50 86.52
609-0206 C8 No Capping, Octyl 20mg/6mL, Box of 30 55.90
609-0351 C8 No Capping, Octyl 35mg/1mL, Box of 100 186.34
609-0353 C8 No Capping, Octyl 35mg/3mL, Box of 50 93.17
609-0356 C8 No Capping, Octyl 35mg/6mL, Box of 30 62.56
609-1003 C8 No Capping, Octyl 100mg/3mL, Box of 50 117.13
609-1006 C8 No Capping, Octyl 100mg/6mL, Box of 30 74.54
609-1503 C8 No Capping, Octyl 150mg/3mL, Box of 50 133.1
609-1506 C8 No Capping, Octyl 150 mg/6ml, Box of 30 90.51
609-3506 C8 No Capping, Octyl 350mg/6mL, Box of 30 130.44
609-6506 C8 No Capping, Octyl 650mg/6mL, Box of 30 190.33
60B-0203 C4 Butyl 20mg/3mL, Box of 50 86.52
60S-0201 C4 Butyl 20mg/1 mL, Box of 100 173.03
60S-0201R C4 Butyl 20mg/1mL, 96 rimless 259.55
620-0096 SI Silica 20mg/1mL, 96-well block 319.44
620-0201 Si Silica 20mg/1 mL, Box of 100 139.76
620-0201R SI Silica 20mg/1mL, 96 rimless 259.55
620-0201RH SI Silica 20mg/1mL, 96 rimless/holder 306.13
620-0203 SI Silica 20mg/3mL, Box of 50 79.86
620-0206 SI Silica 20mg/6mL, Box of 30 51.91
620-0351 SI Silica 35mg/1mL, Box of 100 146.41
620-0353 SI Silica 35mg/3mL, Box of 50 79.86
620-0356 SI Silica 35mg/6mL, Box of 30 51.91
620-1003 SI Silica 100mg/3mL, Box of 50 90.51
620-1006 SI Silica 100mg/6mL, Box of 30 55.90
620-1503 SI Silica 150mg/3mL, Box of 50 110.47
621-0096 Florisil, Magnesium Sulfate (40um) 20mg/1mL, 96-well block 319.44
621-0201 Florisil, Magnesium Sulfate (40um) 20mg/1 ml, Box of 100 279.51
621-0201R Florisil, Magnesium Sulfate (40um) 20mg/1mL, 96 rimless 259.55
621-0201RH Florisil, Magnesium Sulfate (40um) 20mg/1mL, 96 rimless/holder 306.13
621-0203 Florisil, Magnesium Sulfate (40um) 20mg/3mL, Box of 50 139.76
621-0206 Florisil, Magnesium Sulfate (40um) 20mg/6mL, Box of 30 91.84
621-0351 Rorisil, Magnesium Sulfate (40um) 35mg/1mL, Box of 100 306.13
621-0353 Florisil, Magnesium Sulfate (40um) 35mg/3mL, Box of 50 153.07
621-0356 Rorisil, Magnesium Sulfate (40um) 35mg/6mL, Box of 30 99.83
621-1003 Florisil, Magnesium Sulfate (40um) 100mg/3mL, Box of 50 199.65
621-1006 Rorisil. Magnesium Sulfate (40um) 100mg/6mL, Box of 30 119.79
621-1503 Rorisil, Magnesium Sulfate (40um) 150mg/3mL, Box of 50 366.03
621-1506 Florisil, Magnesium Sulfate (40um) 150mg/6mL, Box of 30 219.62
621-3506 Florisil, Magnesium Sulfate (40um) 350mg/6mL, Box of 30 419.27
621-3507 Florisil, Magnesium Sulfate (40um) 350mg/15mL, Box of 20 292.82
632-0096 20H 2,3-Dihydroxypropoxypropyl 20mg/1mL, 96-well block 319.44
632-0201 20H 2,3-Dihydroxypropoxypropyl 20mg/1 mL, Box of 100 212.96
632-0201R 20H 2,3-Dihydroxypropoxypropyl 20mg/1mL, 96 rimless 259.55
632-0201RH 20H 2,3-Dihydroxypropoxypropyl 20mg/1mL, 96 rimless/holder 306.13
632-0203 20H 2,3-Dihydroxypropoxypropyl 20mg/3mL, Box of 50 113.14
632-0206 20H 2,3-Dihydroxypropoxypropyl 20mg/6mL, Box of 30 71.87
632-0351 20H 2,3-Dihydroxypropoxypropyl 35mg/1mL, Box of 100 232.93
632-0353 20H 2,3-Dihydroxypropoxypropyl 35mg/3mL, Box of 50 119.79
632-0356 20H 2,3-Dihydroxypropoxypropyl 35mg/6mL, Box of 30 74.54
632-1003 20H 2,3-Dihydroxypropoxypropyl 100mg/3mL, Box of 50 139.76
632-1006 20H 2,3-Dihydroxypropoxypropyl 100mg/6mL, Box of 30 91.84
632-1503 20H 2,3-Dihydroxypropoxypropyl 150mg/3mL, Box of 50 166.38
632-1506 20H 2,3-Dihydroxypropoxypropyl 150mg/6mL, Box of 30 106.48
632-3506 20H 2,3-Dihydroxypropoxypropyl 350mg/6mL, Box of 30 166.38
632-6506 20H 2,3-Dihydroxypropoxypropyl 650mg/6mL, Box of 30 199.65
641-0096 NH2 Aminopropyl 20mg/1mL, 96-wel! block 319.44
641-0201 NH2 Aminopropyl 20mg/1 ml, Box of 100 206.31
641-0201R NH2 Aminopropyl 20mg/1mL, 96 rimless 259.55
641-0201RH NH2 Aminopropyl 20mg/1mL, 96 rimless/holder 306.13
641-0203 NH2 Aminopropyl 20mg/3mL. Box of 50 110.47
641-0206 NH2 Aminopropyl 20mg/6mL, Box of 30 74.54
641-0351 NH2 Aminopropyl 5mg/1mL, Box of 100 226.27
641-0353 NH2 Aminopropyl 5mg/3mL, Box of 50 117.13
641-0356 NH2 Aminopropyl 35mg/6mL, Box of 30 71.87
641-1003 NH2 Aminopropyl 100mg/3mL, Box of 50 137.09
641-1006 NH2 Aminopropyl 100mg/6mL, Box of 30 90.51
641-1503 NH2 Aminopropyl 50mg/3ml, Box of 50 166.38
641-1506 NH2 Aminopropyl 150mg/6mL, Box of 30 106.48
641-3506 NH2 Aminopropyl 350mg/6mL, Box of 30 166.38
641-6506 NH2 Aminopropyl 650mg/6mL, Box of 30 210.30
652-0201 CBA Propylcarboxylic Acid 20mg/1mL, Box of 100 206.31
652-0201R CBA Propylcarboxylic Acid 20mg/1mL, 96 rimless 259.55
652-0203 CBA Propylcarboxylic Acid 20mg/3mL, Box of 50 110.47
652-0206 CBA Propylcarboxylic Acid 20mg/6mL, Box of 30 74.54
652-0351 CBA Propylcarboxylic Acid 35mg/1mL, Box of 100 226.27
652-0353 CBA Propylcarboxylic Acid 35mg/3mL, Box of 50 117.13
652-0356 CBA Propylcarboxylic Acid 35mg/6mL, Box of 30 71.87
652-1003 CBA Propylcarboxylic Acid 100mg/3mL, Box of 50 137.09
652-1006 CBA Propylcarboxylic Acid 100mg/6mL, Box of 30 90.51
652-1503 CBA Propylcarboxylic Acid 150mg/3mL, Box of 50 166.38
652-1506 CBA Propylcarboxylic Acid 150mg/6mL, Box of 30 106.48
652-3506 CBA Propylcarboxylic Acid 350mg/6mL, Box of 30 166.38
652-6506 CBA Propylcarboxylic Acid 650mg/6mL, Box of 30 210.30
671-0096 PAX Anion Exchange Polymer 20mg/1mL, 96-well block 319.44
671-0201 PAX Anion Exchange Polymer 20mg/1 ml, Box of 100 279.51
671-0201R PAX Anion Exchange Polymer 20mg/1mL, 96 rimless 259.55
671-0201RH PAX Anion Exchange Polymer 20mg/1mL, 96 rimless/holder 306.13
671-0203 PAX Anion Exchange Polymer 20mg/3mL, Box of 50 139.76
671-0206 PAX Anion Exchange Polymer 20mg/6mL, Box of 30 91.84
671-0351 PAX Anion Exchange Polymer 35mg/1mL, Box of 100 306.13
671-0353 PAX Anion Exchange Polymer 35mg/3mL, Box of 50 153.07
671-0356 PAX Anion Exchange Potymer 35mg/6mL, Box of 30 99.83
671-1003 PAX Anion Exchange Polymer 100mg/3mL, Box of 50 199.65
671-1006 PAX Anion Exchange Polymer 100 mg/6mL, Box of 30 119.79
671-1503 PAX Anion Exchange Polymer 150mg/3mL, Box of 50 366.03
Part Number Phase Description Price Part Number Phase Description Price
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 25
671-1506 PAX Anion Exchange Polymer 150mg/6mL, Box of 30 219.62
671-3506 PAX Anion Exchange Polymer 350mg/6mL, Box of 30 419.27
671-6506 PAX Anion Exchange Polymer 650mg/6mL, Box of 30 638.88
709-0096 PCX Cation Exchange Polymer 20mg/1mL, 96-well block 319.44
709-0201 PCX Cation Exchange Polymer 20mg/1 ml, Box of 100 279.51
709-0201R PCX Cation Exchange Polymer 20mg/1mL, 96 rimless 259.55
709-0201RH PCX Cation Exchange Polymer 20mg/1mL, 96 rimless/holder 306.13
709-0203 PCX Cation Exchange Polymer 20mg/3mL, Box of 50 139.76
709-0206 PCX Cation Exchange Polymer 20mg/6mL, Box of 30 91.84
709-0351 PCX Cation Exchange Polymer 35mg/1mL, Box of 100 306.13
709-0353 PCX Cation Exchange Polymer 35mg/3mL, Box of 50 153.07
709-0356 PCX Cation Exchange Polymer 35mg/6mL, Box of 30 99.83
709-1003 PCX Cation Exchange Polymer 100mg/3mL, Box of 50 199.65
709-1006 PCX Cation Exchange Polymer 100mg/6mL, Box of 30 119.79
709-1503 PCX Cation Exchange Polymer 150mg/3mL, Box of 50 366.03
709-1606 PCX Cation Exchange Polymer 150mg/6mL, Box of 30 219.62
709-3506 PCX Cation Exchange Polymer 350mg/6mL, Box of 30 419.27
709-6506 PCX Cation Exchange Polymer 650mg/6mL, Box of 30 638.88
710-0096 PNP Non-polar Polymer 20mg/1mL, 96-well block 319.44
710-0201 PNP Non-polar Polymer 20mg/1 mL, Box of 100 279.51
710-0201R PNP Non-polar Polymer 20mg/1 ml, 96 rimless 259.55
710-0201RH PNP Non-polar Polymer 20mg/1mL, 96 rimless/holder 306.13
710-0203 PNP Non-polar Polymer 20mg/3mL, Box of 50 139.76
710-0206 PNP Non-polar Polymer 20mg/6mL, Box of 30 91.84
710-0351 PNP Non-polar Polymer 35mg/1mL, Box of 100 306.13
710-0353 PNP Non-polar Polymer 35mg/3mL, Box of 50 153.07
710-0356 PNP Non-polar Polymer 35mg/6mL, Box of 30 99.83
710-1003 PNP Non-polar Polymer 100mg/3mL, Box of 50 199.65
710-1006 PNP Non-polar Polymer 100mg/6mL, Box of 30 119.79
710-1503 PNP Non-polar Polymer 150mg/3mL, Box of 50 366.03
710-1506 PNP Non-polar Polymer 150mg/6mL, Box of 30 219.62
710-3506 PNP Non-polar Polymer 350mg/6mL, Box of 30 419.27
710-6506 PNP Non-polar Polymer 650mg/6mL, Box of 30 638.88
720-0096 4CX Butyl/cation exchange 20mg/1mL. 96-well block 319.44
720-0201 4CX Butyl/cation exchange 20mg/1 mL, Box of 100 232.93
720-0201R 4CX Butyl/cation exchange 20mg/1mL, 96 rimless 259.55
720-0201RH 4CX Butyl/cation exchange 20mg/1mL, 96 rimless/holder 306.13
720-0203 4CX Butyl/cation exchange 20mg/3mL, Box of 50 123.78
720-0206 4CX Butyl/cation exchange 20mg/6mL, Box of 30 83.85
720-0351 4CX Butyl/cation exchange 35mg/1mL, Box of 100 286.17
720-0353 4CX Butyl/cation exchange 35mg/3mL, Box of 50 146.41
720-0356 4CX Butyl/cation exchange 35mg/6mL, Box of 30 90.51
720-1003 4CX Butyl/cation exchange 100mg/3mL, Box of 50 153.07
720-1006 4CX Butyl/cation exchange 100mg/6mL, Box of 30 95.83
720-1503 4CX Butyl/cation exchange 150mg/3mL, Box of 50 177.02
720-1506 4CX Butyl/cation exchange 150mg/6mL, Box of 30 110.47
720-3506 4CX Butyl/cation exchange 350mg/6mL, Box of 30 175.69
720-6506 4CX Butyl/cation exchange 650mg/6mL, Box of 30 219.62
721-0096 4AX Butyl/Anion Exchange 20mg/1mL, 96-well block 319.44
721-0201 4AX Butyl/Anion Exchange 20mg/1 mL, Box of 100 232.93
721-0201R 4AX Butyl/Anion Exchange 20mg/1mL, 96 rimless 259.55
721-0201RH 4AX Butyl/Anion Exchange 20mg/1mL, 96 rimless/holder 306.13
721-0203 4AX Butyl/Anion Exchange 20mg/3mL, Box of 50 69.61
721-0206 4AX Butyl/Anion Exchange 20mg/6mL, Box of 30 83.85
721-0351 4AX Butyl/Anion Exchange 35mg/1mL, Box of 100 286.17
721-0353 4AX Butyl/Anion Exchange 35mg/3mL, Box of 50 146.41
721-0356 4AX Butyl/Anion Exchange 35mg/6mL, Box of 30 90.51
721-1003 4AX Butyl/Anion Exchange lOOmg/3mL, Box of 50 153.07
721-1006 4AX Butyl/Anion Exchange 100mg/6mL, Box of 30 95.83
721-1503 4AX Butyl/Anion Exchange 150mg/3mL, Box of 50 177.02
721-1506 4AX Butyl/Anion Exchange 150mg/6mL, Box of 30 110.47
721-3506 4AX Butyl/Anion Exchange 350mg/6mL, Box of 30 175.69
721-6506 4AX Butyl/Anion Exchange 650mg/6mL, Box of 30 219.62
722-0096 8CX Octyl/Cation Exchange 20mg/1mL. 96-well block 319.44
722-0201 8CX Octyl/Cation Exchange 20mg/1 mL, Box of 100 232.93
722-0201R 8CX Octyl/Cation Exchange 20mg/1mL, 96 rimless 259.55
722-0201RH 8CX Octyl/Cation Exchange 20mg/1mL, 96 rimless/holder 306.13
722-0203 8CX Octyl/Cation Exchange 20mg/3mL, Box of 50 123.78
722-0206 8CX Octyl/Cation Exchange 20mg/6mL, Box of 30 83.85
722-0351 8CX Octyl/Cation Exchange 35mg/1mL, Box of 100 286.17
722-0353 8CX Octyl/Cation Exchange 35mg/3mL, Box of 50 146.41
722-0356 8CX Octyl/Cation Exchange 35mg/6mL, Box of 30 90.51
722-1003 8CX Octyl/Cation Exchange 100mg/3mL, Box of 50 153.07
722-1006 8CX Octyl/Cation Exchange 100mg/6mL, Box of 30 95.83
722-1503 8CX Octyl/Cation Exchange 150mg/3mL, Box of 50 177.02
722-1506 8CX Octyl/Cation Exchange 150mg/6mL, Box of 30 110.47
722-3506 8CX Octyl/Cation Exchange 350mg/6mL, Box of 30 175.69
722-6506 8CX Octyl/Cation Exchange 650mg/6mL, Box of 30 219.62
723-0096 SAX Octyl/Anion Exchange 20mg/1mL, 96-well block 319.44
723-0201 SAX Octyl/Anion Exchange 20mg/1 mL, Box of 100 232.93
723-0201R 8AX Octyl/Anion Exchange 20mg/1mL, 36 rimless 259.55
723-0201RH 8AX Octyl/Anion Exchange 20mg/1mL, 96 rimless/holder 306.13
723-0203 SAX Octyl/Anion Exchange 20mg/3mL, Box of 50 123.78
723-0206 SAX Octyl/Anion Exchange 20mg/6mL, Box of 30 83.85
723-0351 SAX Octyl/Anion Exchange 35mg/1mL, Box of 100 286.17
723-0353 8AX Octyl/Anion Exchange 35mg/3mL, Box of 50 146.41
723-0356 SAX Octyl/Anion Exchange 35mg/6mL, Box of 30 90.51
723-1003 8AX Octyl/Anion Exchange 100mg/3mL, Box of 50 153.07
723-1006 SAX Octyl/Anion Exchange 100mg/6mL, Box of 30 95.83
723-1503 8AX Octyl/Anion Exchange 150mg/3mL, Box of 50 177.02
723-1506 8AX Octyl/Anion Exchange 150mg/6mL, Box of 30 110.47
723-3506 SAX Octyl/Anion Exchange 350mg/6mL, Box of 30 175.69
723-6506 SAX Octyl/Anion Exchange 650mg/6mL, Box of 30 219.62
802-1503 C18 No Capping, Octadecyl 150 mg/3mL, Box of 50 133.1
802-1506 C18 No Capping, Octadecyl 150mg/6ml, Box of 30 90.51
Part Number Phase Description Price Part Number Phase Description Price
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com26Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Vacuum Manifolds & Accessories
MicroLute™ ManifoldThe MicroLute™ vacuum manifold from Porvair Sciences isprecision machined from crystal clear acrylic (top plate) andacetal polymer (plenum chamber). The acrylic top plate allowsvisual access to the plenum chamber for checking progress ofthe separation process.
• Designed to take most filter plates manufactured to the SBS/ANSI specification with long drip directors
• Also designed so that SPE plates can be used, especially the Porvair Sciences MicroLute™ plate
• Fitted with valve controller to ensure accurate adjustments of vacuum to the manifold
• On/off valve for speed of use• Square well collection plate volumes of 350µl, 1ml and
2ml may be used. Any plate up to 44mm in height canbe used
• Fitted with a custom O-ring in upper surface allowing airtight interface between plates during operation
• Removable top plate to install reservoir tray or collection plate
• Chamber has a medium resistance to alcohols and weak acids
Part No. Description Qty Price
PV-228008 Standard MicroLute™ manifold to hold deep 96-well collection plate 1 $1512.00PV-228007 Replacement gasket, profile (to fit between top plate and vacuum chamber), for PV-228008/PV-228020 1 $ 45.00PV-228009 Replacement gasket, flat (to fit top plate below filtration plate), for PV-228008/PV-228020 1 $ 45.00
PV-228010 Optional spacer insert, polypropylene, to allow use of 1ml round well polypropylene microplates (PV-219002) in acrylic deep well manifolds (PV-228008/PV-228020) 1 $ 173.00
PV-228012 Optional spacer insert, HDPE, 350μl, to allow use of 350μl microplates in acrylic manifolds (PV-228008/PV-228020) 1 $ 251.00
PV-219010 Disposable reservoir tray, PVC 25 $ 107.00PV-228001 Single plate manifold, high impact polystyrene, for filter plates (no waste collection) (not shown) 1 $ 126.00
Universal Robotic ManifoldBased on the successful MicroLute™ Acrylic Manifold, thenew Universal Robotic Manifold is designed to be easilyassembled and disassembled by robotic manipulators,enabling productive automation of SPE or DNA clean-up pro-cedures. Able to accommodate collection plates from 14mm -44mm in height and adaptable for working with short, mediumand long skirts and drip directors, the Universal RoboticManifold can operate with many different brands of filter plateand collection trays. Supplied with an integral vacuum gauge,the Manifold provides complete control of vacuum pressureensuring plates are processed with high reproducibility.
The Manifold is fully compatible with most commercial roboticliquid handling systems.
The Universal Robotic Manifold is suitable for a range ofmanufacturerʼs plates without an adaptor. For certain platetypes a Shallow Adaptor or a Deep Adaptor is required.
• Compatible with any filter plate type• Robotic friendly designs aids automation• Chemically resistant acetal/acrylic construction• Adaptable for different collection plates• Easy visual inspection of process• Built in vacuum gauge for reproducibility
Part No. Description Qty PricePV-228020 Universal robotic compatible manifold to hold deep 96-well collection plate 1 $1985.00PV-228021 Adaptor 1 for medium skirt/medium drip director plates 1 $ 390.00PV-228022 Adaptor 2 for short skirt/long drip director plates 1 $ 390.00
Gaskets and spacers are identical to those for our standard MicroLute™ acrylic manifold
Ordering Information
Ordering Information
676767
67
67
6767
676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 27Chromatography is our world
18
Vacuum Manifolds
Vacuum manifolds for SPE sample preparation, filtration, andelusion are available in 12, 16, and 24 port configurations fromCiro Manufacturing Corp. These manifolds permit consistentextraction and filtration results. Multiple sample processingwith these manifolds simplifies procedures and savestime.The manifolds consist of a clear glass chamber and lid towhich a vacuum is applied to draw a sample through an SPEcolumn, cartridge, or disk.Adjustable racks placed in the glass vacuum chamber willaccommodate a variety of sample collection vessels,including test tubes, autosampler vials, volumetric flasks, andErlenmeyer flasks. Eluants are deposited directly into thecollection vessel of choice via polypropylene, optionalstainless steel, or Teflon needles.Drying attachments for the 12 and 24 port manifolds will directa flow of air or nitrogen into the collection vessels to dryeluants prior to further analysis. Drying attachments can alsobe connected, via adapters, to SPE columns or cartridges inorder to dry the column or cartridge prior to final elusion.Optional disposable solvent resistant polypropylene liners areavailable for the twelve port manifolds.These waste linersgreatly simplify sample preparation, solvent disposal, andclean-up.
Drying attachmentsDrying Attachments are available forthe 12 and 24 port manifolds, whichwill direct the flow of air or nitrogen intothe collection vessels to concentrateeluants, prior to further analysis. Dryingattachments can also be connecteddirectly to columns, cartridges, or disks,via adapters to permit drying sorbent beds, prior to finalelution.
Teflon needles and control valvesDisposable Teflon needles andTeflon needles with flow controlvalves are designed to fit throughthe manifold lid via the luerfitting.These needles deliver theeluant directly from the SPE
column or cartridge into the collection vessel in the vacuumchamber.These needles, when used in conjunction with Tefloncolumns and Teflon frits ensure zero extractables from the col-umn, frits, and fluid path. This combination is especially use-ful for critical sample analysis, such as environmental sam-ples.
Waste containersDisposable solvent resistant polypropylene waste liners, for12 port manifolds, greatly simplify sample preparation, solventdisposal, and final clean-up of the manifold.The disposable waste liner is a molded solvent resistantpolypropylene liner that fits into the vacuum chamber of the 12port manifold. The liner is designed to contain all liquids used in SPEsample preparation.To use the liner, remove the manifold lidand take out the rack and shelf set.
Place the disposable liner into the glass vacuum chamber,and replace the manifold lid. Proceed with all conditioning and sample preparation steps.Just prior to final elution, the liner, containing the wastesolvents, is removed from the vacuum chamber. There aresmall handles at each end of the waste liner to facilitate itsremoval. Replace the lid, and proceed with the final elution ofthe analyte.Waste solvents should be properly discarded from the liner.The liner can be cleaned and re-used a number of times, priorto discarding.
Ordering Information - Vacuum Manifolds, 12 Position
Ordering Information - Vacuum Manifolds, 16 Position
Part No. Description Qty Price
CM4012 Vacuum manifold Set-Complete 1 $620
CM4013 Glass chamber 1 $118CM4014 Cover, gasket, & 12 stopcocks 1 $255CM4015 Gaskets 2 $ 14CM4016 Vacuum gauge, valve, & glass chamber 1 $395CM4017 Needles - Polypropylene 12 $ 26CM4018 Needles - Stainless Steel 12 $ 56
CM4019 Collection Rack-shelves, legs, clips, & posts 1 $ 63
CM4020 Plate - 13mm 1 $ 54CM4021 Plate - volumetric flask 1 $ 54CM4022 Plate - 16mm test tube 1 $ 54CM4023 Plate - autosampler vial 1 $ 54CM4024 Plate - dimple 1 $ 54CM4025 Plate - base 1 $ 54CM4026 Stopcocks 12 $ 48CM4027 Drying attachment 1 $324CM4028 12 Position PP vacuum waste container 10 $109
Part No. Description Qty Price
CM4416 Vacuum manifold Set-Complete 1 $703CM4417 Glass chamber 1 $153CM4418 Cover, gasket, & 12 stopcocks 1 $372CM4419 Gaskets 2 $ 20CM4420 Vacuum gauge, valve, & glass chamber 1 $452CM4421 Needles - Polypropylene 16 $ 35CM4422 Needles - Stainless Steel 16 $ 89
CM4423 Collection Rack-shelves, legs, clips, & posts 1 $146
CM4424 Plate - 13mm 1 $ 66CM4426 Plate - 16mm test tube 1 $ 66CM4428 Plate - dimple 1 $ 66CM4429 Plate - base 1 $ 66CM4430 Stopcocks 16 $ 63CM4431 Drying attachment 1 $399
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67676767676767
67
676767676767676767
67676767676767
67
676767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com28Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
19
Vacuum Manifolds & Accessories
Part No. Description QtyPrice
CM4824 Vacuum manifold Set-Complete 1 $834CM4825 Glass chamber 1 $153CM4826 Cover, gasket, & 12 stopcocks 1 $403CM4827 Gaskets 2 $ 20CM4828 Vacuum gauge, valve, & glass chamber 1 $568CM4829 Needles - Polypropylene 24 $ 52CM4830 Needles - Stainless Steel 24 $111
CM4831 Collection Rack-shelves, legs, clips, & posts 1 $146
CM4832 Plate - 13mm 1 $ 66CM4834 Plate - 16mm test tube 1 $ 66CM4836 Plate - dimple 1 $ 66CM4837 Plate - base 1 $ 66CM4838 Stopcocks 24 $ 95CM4839 Drying attachment 1 $419
Ordering Information - Vacuum Manifolds, 24 Position
Part No. Description Qty Price
CM4102 Female Luer Fittings 2 $ 8CM4103 Male Luer Fittings 2 $ 8CM4104 Support posts for rack 3 $ 59CM4105 Legs for cover - black 4 $ 19CM4106 Vacuum gauge & valve assembly 1 $132CM4107 Valve assembly only 1 $113CM4108 Vacuum gauge 1 $ 33CM4109 Retaining clips 12 $ 34CM4110 Vacuum manifold plugs 50 $ 22
Ordering Information - Vacuum Manifold Accessories
Part No. Description Qty Price
CM4202 Control Valve 25 $149CM4204 Control Valve 50 $298CM4210 Teflon Needles 100 $124CM4212 Teflon Needles 500 $620
Ordering Information - Teflon Needles & Control Valves
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67676767676767
67676767676767
676767676767676767
67676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 29
Solvent EvaporatorsPorvair evaporators are designed to remove the traditionallaboratory ʻbottleneckʼ of solvent evaporation from microplatesprior to analysis or reconstitution in storage buffer.These evaporators give significant throughput advantages tolaboratories looking to optimize microplate sample preparationproductivity.Faster than centrifugal evaporation, significant increases insample throughput are achieved through advanced evaporatorhead technology and an innovative manifold design, whichdirectly injects heated nitrogen into each individual well of themicroplate simultaneously. The evaporators have been designed to be simple to install,operate and maintain. Installation requires only connection to agas supply or cylinder and mains electricity. Safety of operationis ensured as the CE marked compact units fit into all fumecupboards. Not suitable for high boiling solvents such as DMSOand water.
Both MiniVap™ and Ult
r
a
V
ap™ may be operated with a supplyof clean, dry compressed air in place of nitrogen, if the chemistryallows. An in-line gas filter must be used in this case.
MiniVap™• Quicker dry down times than standard methods such
as vacuum oven• Tests have shown that the MiniVap can evaporate
500µl of methanol in less than 6 minutes• Designed for any SBS/ANSI 96-well plate• 24 vial head now available• Simple to install and operate• Easy adjustments of temperature, gas flow rates and
needle depth into the wells• Compact footprint –fits all standard fume cupboards
The MiniVap is purpose designed for low usage research anddevelopment departments where low numbers of individualplates or vials need drying. The MiniVap is simple to operate andmaintain. Installation requires only connection to a gas supplyand standard mains socket. With manual control of the needledepth, gas temperature and flow rate, it allows fine control and quicker drying times than other standard methods.
UltraVap™• Designed for heat sensitive and thermally
labile samples• Nine different drying programmes can be retained
in the memory • Ability to upload and download methods• Robotic plate stage automatically moves plates
up and down• RS232 allows remote control via PC or LH robot• Removes most stubborn solvents in just minutes• Can evaporate 500µl methanol in 5 minutes• Compact footprint allows the Ultravap to fit into all
standard fume cupboards• Choice of straight, curved & 24, 96 or 384 needles• Compatible with Tecan™, Hamilton™ and Beckman™
robotic liquid handlers
Whereas the MiniVap™ is a fully manual system, the Ultravap™is a digitally controlled programmable evaporator. It can be usedas a stand alone unit or driven by a computer, often connected toa robotic liquid handler. After empirical data for dry down hasbeen produced, this can be entered into the memory of theUltravap for future recall and use. Each programme has threestages, with control of gastemperature, pressureand plate height at eachstage. Nine differentmethods can be perma-nently stored in memory.The Ultravap will thenevaporate plate contentsquickly, by keeping theheated gas needles closeto the liquid surface at alltimes in the concentrationprocess, without furthermanual intervention.
Part No. Description PriceMiniVap™
PV-229201 MiniVap™ (230 Volts), with 96 spiral needles $ 12,850.00PV-229200 MiniVap™ (230 Volts), with 96 straight needles $ 12,574.00PV-229205 MiniVap™ (230 Volts), with 24 straight needles $ 12,574.00PV-229203 MiniVap™ (110 Volts), with 96 spiral needles $ 12,850.00PV-229202 MiniVap™ (110 Volts), with 96 straight needles $ 12,574.00PV-229204 MiniVap™ (110 Volts), with 24 straight needles $ 12,574.00
UltraVap™Ultravap™ 24 Straight needles, 230V, for 24-well plates and vial carriers $ 18,542.00Ultravap™ 96 with spiral needles, 230V, for 96-well plates $ 19,354.00Ultravap™ 96 with straight needles, 230V, for 96-well plates $ 18,542.00Ultravap™ 384 with straight needles, 230V, for 384-well plates $ 19,872.00Ultravap™ 24 Straight needles, 110V, for 24-well plates and vial carriers $ 18,542.00Ultravap™ 96 with spiral needles, 110V, for 96-well plates $ 19,354.00Ultravap™ 96 with straight needles, 110V, for 96-well plates $ 18,542.00
PV-229138PV-229070PV-229135PV-229071PV-229139PV-229080PV-229136PV-229081 Ultravap™ 384 with straight needles, 110V, for 384-well plates $ 19,872.00
Spare parts and consumables for evaporators also available.Please contact us.
Ordering Information
676767676767
6767676767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com30Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com3Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing MatsSam
ple Handling
- Vials, Caps, Inserts, 96 Well Plates, Sealing M
ats
51
Power 110/220V AC, 50/60Hz
Power Consumption 405 W nominal
Fuse Rating 5A fast blow
Dimensions 9.52”W x 12.05”D x 15.72”H
Weight 25lbs (11.36Kg)
Inlet Gas Connection 1/4”
Inlet Gas Pressure Inlet Gas Pressure Minimum 15psi, Maximum 50psi
Minimum Operation Flow Rate 25 liters per minutes (LPM)
Maximum Operation Flow Rate 60 liters per minutes (LPM)
Maximum Operating Gas Temperature 60C (upper head) 80C (lower head)
Specifications
* 500 ul volumes used in a 1 ml collection plate
** 1 ml volumes used in a 2 ml collection plate
Bottom unit is set to 20°C above top unit temperature in order to
compensate for heat lost through the collection plate
Sample Dry Down Times (in minutes)Solvents *500 ul/40C **1ml/40C 500 ul/60C 1 ml /60C
Methanol 14 28 11 20
Isopropanol 16.5 26 11.5 16.5
Features & Benefits
Fast - simultaneous upper and lower gas heating mechanism concentrates samples up to five times faster than other techniques eliminates bottlenecks in high throughput sample screening
Compact - fits under any hood or micro- ventilation system Flexible - user-adjustable flow rates and gas temperatures Convenient - both upper and lower assemblies are easily removable for quick and simple cleaning
The Evaporex® has two needle assemblies, each consists of 96 individual stainless steel needles that evenly distribute heated gas into the microplates from both the top and bottom. The upper gas flow path is sealed away from the heating elements in a stainless steel path in order to prevent sample contamination.
The lower platform can be adjusted to any height from the upper The lower platform can be adjusted to any height from the upper needle assembly, allowing the needles to come in close proximity to - without actually touching - the sample. This feature minimizes drying time and enables the user to develop methods utilizing a variety of plate sizes and sample volumes.
The EVX Series is suitable for use with aqueous or organic sol-vents (not dry or concentrated acid solutions).
The Evaporex series solvent evaporators offer high-performance drydown for microplates at a reasonable price.
EVX - 96Evaporex
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 313Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing MatsSam
ple Handling
- Vials, Caps, Inserts, 96 Well Plates, Sealing M
ats
47
www.resolutionsys.com
System-96TM
System-48TM
TM
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com32Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Part # Product Description List PriceSystem-48
289-0004 System 48 Processor II $3,377.00289-1000 Heated manifold Option $950.00279-0021 1ml SPE Column Rack $235.60279-0022 3ml SPE Column Rack $235.60279-0023 6ml SPE Column Rack $235.60279-0015 12 x 75mm Collection Rack $235.60279-0016 13 x 100mm Collection Rack $235.60279-0017 16 x 100mm Collection Rack $235.60279-0018 12 x 32mm Sampler Vial Rack $235.60279-0020 Collection Rack 16 x125 10/ml, Centrifuge $258.32279-0012 48-Place Sealing Gasket $55.00279-0010 Gas Supply Adapter $30.60279-0009 Waste Bin Inserts (3 per pack) $30.60
System-96288-0001 System 96 Processor II $3,451.00288-1000 Heated Manifold Option $950.00278-0037 96 Column Holder $55.00278-0035 96-Place Sealing Gasket $44.44278-0032 10mL x 24 Collection Tray $15.00278-0034 1mL x 96 Collection Tray $15.00278-0038 2mL x 96 Collection Tray $15.00
Heaters and Coolers282-0246 Column Heater 150 $1,295.00282-0256 Column Heater 250 $1,295.00282-0306 Column Cooler 250 $2,450.00282-3010 Mobile Phase Preheater/Cooler, 0.005" $105.00
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 33
P3 Protein Precipitation Plates
P3 Protein Precipitation Plates• Dual frit design• Pre-filter frit at 100µm traps large flocculant particles• Secondary frit traps fine protein particles at <10µm• Frits are hydrophobic/oleophobic.
This retains sample/acetonitrile in the well to allow precipitation of the proteins until vacuum is applied.
• Pore size optimized to allow ideal flow rate• Inert filter material to ensure no adsorption of sample
components• Frit structure prevents break through of
protein particles• Industry standard MicroLute™ format enables
easy automation• Specially selected polypropylene for low extractables
Biological samples commonly contain proteins that interferewith downstream applications. The P3 plate uses the CRASHmethod, in which the protein is denatured with acetronitr ileand the flocculant filtered out, allowing 96 samples to behandled at one time. The Protein Precipitation Plate, P3, isbased on the industry standard MicroLute™ format, but wi th-out the chromatographic sorbent. Protein ʻcrashesʼ out ofsolution and precipitates directly in each well when acetonitr ileis added, thus solving all common problems associated withthe CRASH technique of protein clean-up. The novel dual f rit,hydrophobically treated matrix means that there is no ʻwettingoutʼ and leakage of the sample through the plate before theapplication of vacuum.
P3 is now commonly used as the protein precipitation plate ofchoice in many major pharmaceutical companies.Optional drain cap and top cap mats are available for thosewishing to use vortex sample mixing.
*The Protein MicroLute High Efficiency plate is exactly the same as the P3 butwith the frits untreated. This plate is used when sample and acetronitrile arepre-mixed before being pipetted into the plate.
Part No. Description Qty Price
PV-240100 P3 Protein Precipitation Plate 1 $ 99PV-240200 P3 Protein Precipitation Plate 25 $337PV-240010 Protein MicroLute™ High Efficiency* 1 $ 89
MicroLute™ BioVyon Co-sinter productsBioVyon™ Co-sinter products are made using a solid-sta temedia created from an ultra-pure and highly modifi edpolymeric material with the lowest levels of extractables andleachables. Our proprietary BioVyon™ technology allowshigh-purity silica resins to be supported in a matrix whichprovides a high surface area whilst reducing channellingthrough the column. As the porous material is co-sinteredunder high pressure and temperature with the BioVyon™polymer matrix, the resultant frit or column is impervious tofurther compression and easily resists channelling of liquids,even at high flow rates.
BioVyon C8 and C18 productsPorvair Sciences have introduced MicroLute™ BioVyon™Co-sintered C8 and C18 silica SPE 96-well plates for lowvolume assays. Offered in 96-well MicroLute™ plates as a10mg per well loading of C8 or C18 suitable for low samplevolume bioassay preps and clean ups.
Part No. Description Qty Price
PV-240030 C8 96-well plate 10mg per well 1 $319 PV-240031 C18 96-well plate 10mg per well 1 $319
Micro structure ofBioVyon substrate
Ordering Information - Protein Precipitation Plates
Ordering Information - MicroLute™ BiVyon Co-sinter Products
676767
6767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com34Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
2 2
Filtration
Filter Membrane Compatibility ChartFilter Membrane Chemical Compatibility Chart
Chemical
nolyN
EFTP
FDVP
esolulleC detarenege
R
AcidsCCCL%52 ,citecACCCLlaicalG ,citecA
F CCCN%52 ,cimroCCCL%52 ,cirolhcordyH
Hydrochloric, Concentrated N N C CCCCN%52 ,cirufluS
S LLCNdetartnecnoC ,cirufluCLCN%52 ,cirtiN
N NLCNdetartnecnoC ,cirtiP CCCN%52 ,cirohpsohTrichloroacet CCCL%01 ,ci
BasesAmmonium Hydroxide, 25% C C L —Sodium Hydroxide, 3 Normal C C C —
AlcoholsCCCClohoclA lymACCCClohoclA lyzneBCCCClohoclA lytuBCCCC%07 ,lonahtECCCC%89 ,lonahtECCCClocylG enelyhtECCCC)lorecylG( enirecylGCCCClonaporposICCCC%89 ,lonahteMCCCClonaporP-nCCCClocylG enelyporP
HydrocarbonsCCCCenezneBCCCCenelyX ,enaxeHCCCCenilosaG ,enesoreK
Tetralin —CCCnilaceD ,CCCCeneuloT
Halogenated HydrocarbonsCCCCedirolhcarteT nobraCCCCC)onoM( enezneborolhCCCCLmroforolhCCCCCnoerFCCCLedirolhC enelyhteM
Tr CCCCenahteorolhciTr CCCCenelyhteorolhci
Filter Membrane Chemical Compatibility Chart
Chemical
nolyN
EFTP
FDVP
esolulleC detarenege
R
KetonesA CNCCenotecCyclohe CNCCenonaxIsoprop —NCCenotecalyMethyl Eth CLCCenoteK lyMethyl Isobutyl Ketone (MIBK) C C N C
Esters2-Ethoxyethyl A CLLLetatecAmyl A CCCCetatecBenzyl C—CCetaozneBButyl A CCCCetatecEthyl A CCCCetatecIsopropyl Myris C—CCetatMethyl A CLCLetatecPropyl A CCNLetatecPropylene Glycol A C—CLetatecMethyl Cellosolve Acet CCCCetaTricresyl Phos C—C—etahp
Oxides — EthersAcetonitrile (Methyl Cyanide) C C C CA CCCLenilinDiethyl Aceta CCCCedimDimethyl Forma LNCCedimDimethyl Sulfoxide (DMSO) L C C LDio LLCCenaxEthyl E CCCCrehtIsoprop —NCCrehtE lyP CLCCenidiry
Solvents with NitrogenTetrahydrofu LLCCnarTriethanola CCCCenim
MiscellaneousFormaldehyde Solution, 30% C C C LHydrogen Pero CCCN%03 ,edixPhenol, Aqueou CLCN%01 ,sSilicone Oil and Mineral Oil C C C C
LEGEND - C=Compatible, L=Limited Compatibility, N=Not Compatible, =No Data Available, PTFE=Teflon® , PVDF=Polyvinyledene Difloride
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 35
Filtration Plates
• Polystyrene and polypropylene filter plates• Long and short drip directors• Each well has an individual drainage spout ensuring
100% sample transfer• Manufactured from ultra pure grade polymer• Standard ANSI/SBS footprint• Robot friendly• Fit standard vacuum manifold
Filtration plates are used in their simplest form to remove partic-ulate matter from liquid. Either the particulate matter or the filtrateis needed for further study.
Porvair Sciences has a range of filter plates to suit most filtrationapplications. The company has optimized filter plates for appli-cations including cell harvesting, DNA separations, bindingstudies, plasmid isolation, general filtration and sample clean up.Porvair has a full range of 48-, 96- and 384-well microplates witha choice of glass fibre, nylon, PVDF or polyethylene filtrationmaterials and well volumes ranging from 350µl to 5ml.
Filtration PlatesSolvent resistant
Low Biomolecule Binding
Low Biomolecule Binding
Low Biomolecule Binding
Low Biomolecule Binding
High Biomolecule Binding
High Biomolecule Binding
High Biomolecule Binding
Application
YAC (Yeast Cloning Assays)DNA extraction from agarose gelDye Terminator Clean UpSequencing Reaction Clean Up
Ni-Nta
Streptavidin/biotin beadChromatography beads/resins
Cell Based Receptor BindingSignal transductionPhosphodiesteraseProtein or nucleic acid desaltCell membraneNeonatal ScreeningVesicle AssayDye Terminator RemovalDye Terminator Clean UpSequencing Reaction Clean Up
Solid Phase Extraction (SPE)
YAC (Yeast Cloning Assays)Bacterial DNA prep for PCRAluminaCell fragments/membranesWhole CellsProtease assaysPhosphodiesteraseAntibody neutralizationMammalian Cells CaptureCalcium uptakeDual assay: Ca + receptorMicrosomesSolid Phase RadioimmunoassaysDNA BindingLysate Clari�cation
Cell homogenates. crudeDNA BindingDNA Isolation
PCR Clean upPlasmid MiniprepsRecovering DNA from gelsReverse TranscriptaseSample Clean upM13 phage prepsThymidine UptakeCell homogenates, crude
Cell fragments/membranesCytotoxic/Cell ProliferationSignal transductionMammalian Cells Capture
Filter
HydrophilicPVDF 0.45µm
UHMW PE25µm
P E Frit 25µm
Polypropylene0.45µm
0.7µm
1.0µm
1.2µm
Drip detector
Short
Long
Short
Long
Long
Short
Long
Long
Short
Long
Short
Long
Vol (µl/well)
300400800
300400800
300400800300400800200020005000300400800
3004008002000
1404008002000300400800
300400800
140300400800140300400800
Filter bottom microplate application guide
Other filtration plates available upon request.Please contact Resolution Systems.
Part No. DESCRIPTION QUANTITY PRICEPV-360047 96 Well PP, 300µL Short drip UHMW Polyethylene, MPS 25µm 50 $1095.00PV-360041 96 Well PP, 300µL Long drip UHMW Polyethylene, MPS 25µm 50 $ 990.00PV-360035 96 Well PP, 400µL Short drip UHMW Polyethylene, MPS 25µm 25 $ 534.00PV-360026 96 Well PP, 400µL Long drip UHMW Polyethylene, MPS 25µm 25 $ 534.00PV-360029 96 Well PP, 800µL Short drip UHMW Polyethylene, MPS 25µm 25 $ 720.00PV-360056 96 Well PP, 2mL Long drip UHMW Polyethylene, MPS 25µm 25 $ 757.00
Ordering Information
P
676767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com36Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
2 4
Syringe and Membrane Filters
Membrane Selection GuidecilihpordyHsesU nommoCserutaeFepyT enarbmeM
SolventResistance
ProteinBinding
Nylon Good chemical compatibility and verylow extractables
General ltrationsterilization, HPLC sample prep
Yes Good Medium
Polytetrauoroethylene(PTFE)
Compatible with strong acids and aggressive solvents
Gas, air, and solvent ltration No High* High
Polyvinylidene Fluoride(PVDF)
Good ow rate characteristics.Ideal for chromatography applications.
HPLC sample preparation and general ltration
Yes High Low
Regenerated Cellulose Universal membrane with excellent chemical resistance and low extractables.Use for aqueous and organic samples.
HPLC sample prepgeneral ltration
Yes High Very Low**
*Highest solvent resistance.**Lowest protein binding.
Membrane selectionChoose a lter membrane based on the size and amount of particulate in the sample, the membrane’s chemical compatibility with the sample matrix, and potential interactions (binding) between the membrane and the sample components. This table offers general guidelines on membrane characteristics and applications.
Filter Device SelectionConsider the number of samples, the sample volume, and the ltering mechanism you prefer to use.
Syringe FiltersFiltration is achieved by pushing the sample through the membrane with a syringe or other luer-connection device. Syringe lters allow you to control the rate of ow, which can be critical with delicate samples. Syringe lters also allow you to lter into nearly any tube, vial, or column that represents the next step in your analysis.
Centrifuge Filter TubesFiltration is achieved by pulling the sample through the membrane with centrifugal force. This allows you to simultaneously lter as many samples as your centrifuge can hold, and captures your ltrate in a clean microtube.
Pre-Cut MembraneMultiple diameters offer a wide range of sample capacities, up to multiple liters. You need a ltration apparatus, such as a lter funnel or other vacuum-driven ltration device.
Device CapacitiesemuloV elpmaSnoitpircseD
Syringe Filter Capacities4mm Syringe Filter ≤1mL13mm Syringe Filter ≤30mL17mm Syringe Filter ≤50mL25mm Syringe Filter ≤100mL30mm Syringe Filter ≤100mL
Centrifuge Filter Tube Capacities2mL Tubes 20μL to 500μL50mL Tubes 1mL to 25mL
Pre-Cut Membrane Capacities13mm Pre-Cut Membranes up to 20mL25mm Pre-Cut Membranes up to 100mL47mm Pre-Cut Membranes multi-liter
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 37Chromatography is our world
2 5
Syringe and Membrane Filters
We Offer Affordable, Quality Syringe Filters
Housing Polypropylene housings are highly solvent resistant and exhibit low extractables. They are ideal for filtering samples orsolvents used in chromatography.
Size4mm syringe filters are useful for filtration up to 1mL of low par-ticulate level chromatography of biological samples.17mm syringe filters have a filtration area of 1.3cm2 and a hold-up volume of less than 30uL with an air purge.Ideal for samples up to 12mL.30mm syringe filters have a filtration area of 4.9cm2 and offer thefastest sample filtration.
MembraneThe cellulose acetate and polysulfone membranes are all lowprotein binding, which makes them well suited for filtration ofbiological samples.PTFE membrane in a PP housing can be used to filter solventsand strong acids.Although PTFE is inherently hydrophobic, it can be madehydrophilic by pre-wetting the membrane with methanol andthen rinsing with water.Nylon or polypropylene are ideal for filtration of chromatographysamples.Polypropylene membranes exhibit near zero extractables, arevery resistant to solvents and most chemicals and would be thefirst choice for filtration of chromatography samples.
Next to our excellent l ine, we also carry a complete transfer membrane line.
See page 22 for Filter Membrane Compatibility Chart
Material Description Features Application Pore SizeCA Internally supported
cellulose acetate• Lowest binding material available• Highest throughput• Strength and dimension stability• Uniform pore structure• Hydrophilic
• Tissue culture media sterilization• Protein & enzyme filtration sterilization• Biological fluid filtration, sterilization• Tissue culture media sterilization
0.22 - 5.0
Glass Fiber Glass fiber prefilters • Biologically inert• Available with or without acrylic binders• High dirt-holding capacity
• Gravimetric analysis• Prefilter to extend final filter life• Clarification of particulate laden solutions
0.5, 0.7, 1.0
NC Unsupported nitrocellulose mixed cellulose esters
• Consistent flow rates• High throughputs• Uniform pore structure• Hydrophilic
• Aqueous filtration• Microbiological analysis• Sterility testing• Gravimetric analysis with ashing technique• Particulate analysis
0.1 - 8.0
Nylon Internally supportednylon
• Naturally hydrophilic• Wide chemical compatibility range• Extremely low extractables• Strength and dimensional stability
• Sterilization, clarification of aqueous and organic solvent solutions
• LC sample preparation
0.1 - 20.0
PP Polypropylene • Chemically and biologically inert• Wide chemical compatibility range• Extremely low extractables
• Sterilization, clarification of organic solvent solutions
• LC sample preparation
0.1, 0.22, 0.45
PES Polyethersulfone • Low protein binding• Low extractables• Autoclavable• Wide chemical compatibility range• Strength and dimensional stability
• Tissue culture media sterilization• Protein and enzyme filtration, sterilization• Biological fluid filtration, sterilization
0.22 - 5.0
PVDF Polyvinylidene difluoride • Hydrophobic• Chemically inert towards many solvents,
similar stability to PTFE
• Filtration of polar and non-polar solutions 0.2 - 0.45
PTFE Polytetrafluoroethylene(Teflon laminated onto apolypropylene support)
• Naturally hydrophilic• Compatible with strong acids
and aggressive solvents• Improved durability and handling
• Filtration of strong acids and aggressive solvents
• Venting applications
0.22, 0.45, 1.0
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com38Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
2 6
Membrane Pore Size Part No.Price/100
30mm diameterCA 0.2μm SF5003-06 $109.00
CA 0.45μm SF5112-06 $109.00
Nylon 0.2μm SF6055-06 $ 98.00
Nylon 0.45μm SF6054-06 $ 98.00
Nylon 5.0μm SF6059-06 $ 98.00
PES 0.45μm SF5509-06 $ 98.00
PP 0.2μm SF6550-06 $ 98.00
PTFE 0.2μm SF6057-06 $ 98.00
PTFE 0.45μm SF6058-06 $ 98.00
PVDF 0.2μm SF5510-06 $109.00
PVDF 0.45μm SF5511-06 $109.00
30mm filters with glass fiber membranes
Glass Micro Fiber 0.7μm SF6052-06 $ 98.00
GF 1.0μm SF7500-06 $ 98.00
Nylon/GF 0.45μm SF7504-06 $109.00
PTFE/GF 0.45μm SF7501-06 $109.00
17mm diameter
CA 0.22μm SF6506-06 $ 95.00
CA 0.45μm SF6507-06 $ 95.00
Nylon 0.2μm SF6502-06 $ 95.00
Nylon 0.45μm SF6503-06 $ 95.00
PTFE 0.2μm SF6500-06 $ 95.00
PTFE 0.45μm SF6505-06 $ 95.00
PVDF 0.45μm SF6504-06 $ 99.00
Syringe Filters
• High quality filter with protective anti-burst ring• Available in 17mm and 30mm• Polypropylene housing for increased
solvent resistance• Available in nylon, PTFE, polypropylene,
polyethersulfone, cellulose acetate, nitrocellulose mixed esters, glass gibre and PVDF
• Some filters are available with glass pre-filter
Syringe Filters are available in a select number of filter media, diameters and pore sizes.Please contact us for ordering information on items not shown.
Ordering Information
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
6767676767676767676767
67676767
67676767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 39Chromatography is our world
2 7
Syringe Filters
Syringe Filters
• Available in 25mm• Polypropylene housing for increased
solvent resistance• Available in nylon, PTFE, polypropylene,
polyethersulfone, cellulose acetate, nitrocellulose mixed esters, glass gibre and PVDF
• Some filters are available with glass pre-filter
Membrane Pore Size Part No.Price/100
25mm diameter
GF 1.0μm IS9228 $109.00
Nylon 0.2μm IS9212 $109.00
Nylon 0.45μm IS9213 $109.00
PES 0.45μm IS9241 $109.00
PET 0.45μm IS9220 $109.00
PTFE 0.2μm IS9207 $109.00
PTFE 0.45μm IS9205 $109.00
PVDF 0.2μm IS9218 $125.00
PVDF 0.45μm IS9219 $125.00
RC 0.2μm IS9230 $109.00
RC 0.45μm IS9231 $109.00
Part No. Description Quantity Price
CR186603 3 mL Disposable Syringe 100 $ 41.40CR186605 5 mL Disposable Syringe 100 $ 50.60CR186610 10 mL Disposable Syringe 100 $ 57.50CR186620 20 mL Disposable Syringe 100 $ 87.60
Disposable SyringeThese disposable syringes are useful for sample preparation,especially when used with our syringe filters. Syringes aremade from polypropylene and polyethylene and aresilicone-free.Extractables are minimized compared with rubber-tippedplunger syringes. Syringes are individually wrapped in sterile“peel packs.”
Ordering Information
Ordering Information
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com40Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
2 8
Microfiltration Spin Filters, Receiver Tubes
Micro-Spin Centrifuge Filters- Sample volumes of 20μl to 850μl
Midi-Spin Centrifuge Filters - Sample volumes of 4mL to 7mL
Maxi-Spin Centrifuge Filters - Sample volumes of up to 24mL
Part No. MembranePrice/25
CMBNY02 .2μm Nylon $ 57.00 CMBPE02 .2μm PES $ 57.00 CMBPV02 .2μm PVDF $ 66.00 CMBRC02 .2μm RC $ 57.00 CMBPT02 .2μm PTFE $ 66.00 CMBCA02 .2μm CA $ 57.00 CMBCA45 .45μm CA $ 57.00 CMBNY45 .45μm Nylon $ 57.00 CMBRC45 .45μm RC $ 57.00 CMBPT45 .45μm PTFE $ 66.00 CMBPE45 .45μm PES $ 57.00 CMBPV45 .45μm PVDF $ 66.00
Part No. MembranePrice/100
CMCINY02 .2μm Nylon $ 80.00 CMCIPE02 .2μm PES $ 80.00 CMCIPV02 .2μm PVDF $ 91.00 CMCIRC02 .2μm RC $ 80.00 CMCIPT02 .2μm PTFE $ 91.00 CMCIPP02 .2μm PP $ 80.00 CMCICA02 .2μm CA $ 80.00 CMCICA45 .45μm CA $ 80.00 CMCINY45 .45μm Nylon $ 80.00 CMCIRC45 .45μm RC $ 80.00 CMCIPT45 .45μm PTFE $ 91.00 CMCIPE45 .45μm PES $ 80.00 CMCIPV45 .45μm PVDF $ 91.00 CMCIPP45 .45μm PP $ 80.00
Ordering Information - Micro-Spin800μL capacity with 2.0mL receiver tubes, non-sterile
Ordering Information - Midi-Spin4mL capacity with 7.0mL receiver tubes, non-sterile
Part No. MembranePrice/25
.2μm Nylon $ 86.00
.2μm PES $ 86.00
.2μm PVDF $ 95.00
.2μm RC $ 86.00
.2μm PTFE $ 95.00
.2μm PP $ 86.00
.2μm CA $ 86.00
.45μm CA $ 86.00
.45μm Nylon $ 86.00
.45μm RC $ 86.00
.45μm PTFE $ 95.00
.45μm PES $ 86.00
.45μm PVDF $ 95.00
CMXNY02CMXPE02CMXPV02CMXRC02CMXPT02CMXPP02CMXCA02CMXCA45CMXNY45CMXRC45CMXPT45CMXPE45CMXPV45CMXPP45 .45μm PP $ 86.00
Ordering Information - Maxi-Spin25mL capacity with 50mL receiver tubes, non-sterile
Receiver TubesAdditional plastic products offered include DNASE/RNase freereceiver tubes in various sizes. Receiver tubes can be packaged with spin filters orseparately.
1.5mL
2mL, No-Cap
2mL, with cap
50mL
Part No. Membrane Quantity Price
CM153-00 2.0mL with cap 5,000 $ 233.00 CM152-BK 2.0mL no cap 5,000 $ 233.00 CM158-00 1.5mL with cap 5,000 $ 233.00 CM176-00 0.5mL with cap 5,000 $ 233.00 CM184-00 50mL with cap 500 $ 148.00
Ordering Information
67676767676767
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
6767676767
6767676767676767676767676767
6767676767676767676767676767
6767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 41Chromatography is our world
2 9
Membrane Filters
Nylon• Naturally hydrophilic• Wide chemical compatibility range,
organic solvent resistance (exceptacids and bases)
• Internally supported• Strength and dimensional stability• High binding capacity, high dirt loading capacity• Available in gridded and 1+ PK for testing
Cellulose Acetate (CA)• Lowest binding material available• Hydrophilic• High throughput• Strength and dimension stability• Uniform pore structure
Polytetrafluoroethylene (PTFE)• Naturally hydrophilic• Compatible with strong acids
and aggressive solvents• Improved durability and handling
Polyethersulfone (PES) Membrane• Very low protein binding• Fast flow rates, high throughput• Low extractables• Wide chemical compatibility range• Strength and dimensional stability• Autoclavable
Nitrocellulose Mixed Cellulose Ester (ME)• Consistent flow rates• High throughput• Uniform pore structure• Hydrophilic
Polyvinylidene Difluoride (PVDF)• Hydrophobic• Suitable for filtration of polar
and non-polar solutions• Chemically inert towards many
solvents, similar stability to PTFE
Membrane Filters
Pre Cut Size (mm) 13 25 47 90
Qty Per package 100 100 100 25
Nylon 0.2μm SFNY201300 $ 47.25 SFNY202500 $ 55.90 SFNY204700 $ 75.20 SFNY209025 $ 65.55
0.45μm SFNY401300 $ 47.25 SFNY502500 $ 55.90 SFNY504700 $ 75.20 SFNY509025 $ 65.55
CA0.2μm SFCA201300 $ 47.25 SFCA202500 $ 55.90 SFCA204700 $ 78.50 SFCA209025 $ 65.55
0.45μm SFCA401300 $ 47.25 SFCA502500 $ 55.90 SFCA504700 $ 78.50 SFCA509025 $ 65.55
PTFE0.2μm SFPT201300 $ 47.25 SFPT202500 $ 55.90 SFPT204700 $ 81.50 SFPT209025 $ 65.55
0.45μm SFPT401300 $ 47.25 SFPT502500 $ 55.90 SFPT504700 $ 81.50 SFPT509025 $ 65.55
PES0.2μm SFPS201300 $ 47.25 SFPS202500 $ 55.90 SFPS204700 $ 75.20 SFPS209025 $ 65.55
0.45μm SFPS401300 $ 47.25 SFPS502500 $ 55.90 SFPS504700 $ 75.20 SFPS509025 $ 65.55
NC/ME 0.2μm SFME201300 $ 47.25 SFME202500 $ 55.90 SFME204700 $ 81.50 SFME209025 $ 65.55
0.45μm SFME401300 $ 47.25 SFME502500 $ 55.90 SFME504700 $ 81.50 SFME509025 $ 65.55
PVDF0.2μm SFPV201300 $ 56.75 SFPV202500 $ 99.00 SFPV204700 $164.75 SFPV209025 $ 99.00
0.45μm SFPV401300 $ 56.75 SFPV502500 $ 99.00 SFPV504700 $164.75 SFPV509025 $ 99.00
Ordering Information
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
676767676767676767676767
676767676767676767676767
676767676767676767676767
676767676767676767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com42Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
3 0
Filtration Units
Analytical Funnel Autoclavable Filter Holders• Durable, break resistant, no extra parts to break or wear out• Uses a 47mm depth filter disc• 47mm filter funnel (<400 mL) allows for one-handed operation
and has a unique gravity locking mechanism• No. 8 stopper mounts in a standard 1L filtering flask• No clamps, wheel locks or magnets to wear out• Only 2 parts• Solid, stable and easy to use
Ordering Information
Applications• Filtering liquids for sterility• Particle removal• General filtration
Glass Filter Holders
Ordering Information
For 47mm disc filters
These convenient, high performance filter holders consist of a borosilicateglass funnel (300mL graduated) and base (with a fused-in coarse porosityfritted support; anodized aluminum clamp and a #8 silicone stopper to fit1000mL filter flasks).Mating surfaces are precisely ground flat to assure a leak-resistant seal. The glass parts and the clamp are designed to work together to prevent anywrinkling or tearing of the filter membrane. Used fo analysis of bacteriological contamination or of suspended solids inwater.
Cleaning/preventing cross contamination:
1. Autoclave - 20 minutes at 121°C2. Sterilize - 2-3 minutes in UV sterilizer3. Sanitize - immerse briefly in sulfuric or hydrochloric acid
Replacement parts available.Please contact us for more information.
Kits consist of:47mm• 300mL glass funnel with scale• 47mm fritted glass base • #8 silicone stopper• 47mm aluminum clamp
25mm• 15mL glass funnel with scale• 25mm fritted glass base • #5 silicone stopper• 25mm aluminum clamp
90mm• 1000mL glass funnel with scale• 90mm fritted glass base • #8 silicone stopper• 90mm aluminum clamp
Part No. Description Price
ISGFH25 25mm Filter Holder Kit $ 162.00
ISGFH47 47mm Filter Holder Kit $ 158.00
ISGFH90 90mm Filter Holder Kit $ 419.00
ISGF1000 90mm Filter Holder Kit $ 419.00
Part No. Description Size Quantity Price
IS1213883 Base Only 47mm 1 $ 89.00
IS1213865 Complete Unit 47mm 1 $173.00
IS1214124 Complete Unit 47mm 3 $461.00
IS1213882 Funnel Only 47mm 1 $ 89.00
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67676767
67676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 43Chromatography is our world
3 1
pH-Fix Test Strips
pH-Fix Test StripsFast, accurate, reliable
Always ready for usepH-Fix test strips are used for rapid pH testing directly at thepoint of interest. They are always ready for immediate use.Coming with a complete colour chart they are readily calibrat-ed. As single use devices they are completely maintenancefree. For careful testing of dangerous, poisonous or aggresiveliquids the strips have the optimal design. The longestavailable handle effectively protects the user from contact withthe sample. This increases the safety of operation and addshandling ease.
Patented technology for optimal sample protectionIn the production the indicator reacts with the paper of the testpad to form a chemical bond. The dye is fixed to the test stripand can not bleed into the sample. This protects the sampleagainst contamination and enables measurements in weaklybuffered or strongly alkaline solutions.
Brilliant colours for exact resultspH-Fix test strips feature up to four different indicator pads tocover the complete pH-range. The colour chart exactlymatches both colour and position of the pads on the strips.This enables highly precise pH-determination and makes thetest strips rapid and reliable.
Convenient flat boxesUsers appreciate the quality of pH-Fix. Its classic designrequires small space and fits into the breast pocket of everylab coat.
Established clear plasticThe classic pH-Fix box is made from a special hightransparency plastic. This ensures optimal protection of thecolour chart and a reliable readout.
Wide range of applications
pH-Fix test sticks are appreciated by users worldwide. They are the economic and easy standard for applications,e.g.:
• Aquaculture• Agriculture• Chemical laboratories• Industry• Dairies• Production• Physician offices• Hospitals• Schools• Universities• Metal workshops• Fire brigades• Police• Authorities• Food processing industry• Surface treatment and many more
O CR1
R2
esolulleC
eyD
Contents: 100 StripsCatalogue # MN92110.CLS
pH Test 0-14
76543210
Part No. Description Quantity Price
MN92110.CLS Test strips, 6 x 85mm, pH-Fix 0-14 100 $ 23.75
Wide variety of pH-Fix Test Strips available for all applications listed above.
Please contact us for more information!
Ordering Information
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com44Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
3 2
FunnelFit Filters
XENOSEP FunnelFit™ Filters for extract drying applicationsPre-formed conical filter• Saves time and solvent • Reduces cost and increases lab productivity
For about the same price as your current filter, newFunnelFit™ conical filters eliminate the mundane andfrustrating preparation steps required when working withcumbersome, ill-fitting, pre-pleated or quadrant folded filters.
The pre-formed conical filter fits the funnel perfectly every timewhich improves quality by preventing sample bypass and tipblow-out.
Using FunnelFit™ conical filters is 10 times faster thanquadrant folding circular filters which improves laboratoryproductivity.
FunnelFit™ Conical Filters fit the funnel perfectly ensuring high quality results
Drop & Go!
Eliminate folding, repositioning, and pre-wetting hassles to save time and solvent costs
Part No. Description QuantityCross Reference
to WhatmanPrice
IS2440-125 125mm DA-Medium (8-12 μm) 100 1440-125 $ 58.00IS2440-150 150mm DA-Medium (8-12 μm) 100 1440-150 $ 77.00IS2441-125 125mm DA-Coarse (20-25 μm) 100 1441-125 $ 58.00IS2441-150 150mm DA-Coarse (20-25 μm) 100 1441-150 $ 77.00IS2442-125 125mm DA-Fine (2-3 μm) 100 1442-125 $ 58.00IS2442-150 150mm DA-Fine (2-3 μm) 100 1442-150 $ 77.00
Other diameters and grades available upon request.
Ordering Information
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
676767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 45
QuEChERS
We offer QuEChERS (Quick Easy, Cheap,Effective, Rugged and Safe… pronounced "katchers") products for determining pesticide levels in food samples.
These products make it simple to prepare your food samplesfor analysis with:
• High recoveries• Accurate results• High sample throughput• Minimal solvent use• Less labour• Lower costs• Simple glassware
Sample
Aliquot:1mL, 6mL or 8mL
Original Method10g samples
Original Method15g samples
BufferedAOAC 2007.1 Method
15g samples
BufferedEN 15662 Method
10g samples
General Fruits &Vegetables
2mL & 15mL kits
Fatty/Waxy Fruits & Vegetables
2mL & 15mL kits
Fruits & Vegetableswith Fats, Pigments
2mL & 15mL kits
Aliquot:1mL, 6mL or 8mL
Analysis
Pigmented Fruits & Vegetables
2mL & 15mL kits
General Fruits &Vegetables
2mL & 15mL kits
Fatty/Waxy Fruits & Vegetables
2mL & 15mL kits
Fruits & Vegetableswith Fats, Pigments
2mL & 15mL kits
Pigmented Fruits & Vegetables
2mL & 15mL kits
Add Acetonitrile
Check pH and adjust to 5 - 5.5Add internal standardshake and centrifuge
Shake and Centrifuge
EN MethodAOAC Method
Basic Method for using QuEChERS
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com46Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world3 4
QuEChERS
Part No. Description Volume Recommended Application Qty.Price/100
QuEChERS Kit with Instructions
XE-29500 AOAC 2007.1 50/2 AOAC 2007.1 50 $215.00
50mL Centrifuge Tubes for Sample Extraction
XE-29501
4g MgSO4, 1g NaCl, 1g trisodium citrate dihydrate, .5g disodium hydrogencitrate sesquihydrate
50 Mini-Multiresidue, European prEN-15662 50 $105.00
XE-29502 4g MgSO4, 1g NaCl 50 50 $ 94.00
XE-29503
6g MgSO4, 1.5g NaCl, 1.5g sodium citrate dibasic750mg disodium citrate dibasic sesquihydrate
50 50 $127.00
XE-29504 6MgSO4, 1.5g NaOAc 50 AOAC 2007.1 50 $105.00
XE-29505 6g MgSO4, 1.5g NaOAc, 750mg disodium citrate sesquihydrate 50 50 $116.00
XE-29506 Empty 50mL Centrifuge Tube 50 Mini-Multiresidue, European prEN-15662,AOAC 2007.1 50 $ 55.00
2mL Micro-Centrifuge Tubes
XE-29507 150mg MgSO4, 25mg PSA 2 Mini-Multiresidue, European prEN-15662 100 $138.00
XE-29508 150mg MgSO4, 25mg PSA, 25mg C18 2 Mini-Multiresidue 100 $143.00
XE-29509 150mg MgSO4, 25mg PSA, 2.5mg GCB 2 Mini-Multiresidue, European prEN-15662 100 $143.00
XE-29510 150mg MgSO4, 25mg PSA, 7.5mg GCB 2 Mini-Multiresidue, European prEN-15662 100 $154.00
XE-29511 150mg MgSO4, 50mg PSA 2 AOAC 2007.1 100 $143.00
XE-29512 150mg MgSO4, 50mg PSA, 50mg C18 2 AOAC 2007.1 100 $154.00
XE-29513 150mg MgSO4, 50mg PSA, 50mg GCB 2 AOAC 2007.1 100 $204.00
XE-29514150mg MgSO4, 50mg PSA, 50mg C18,50mg GCB 2 AOAC 2007.1 100 $215.00
15mL Micro-Centrifuge Tubes
XE-29515 1200mg MgSO4, 400mg PSA 15 AOAC 2007.1 50 $116.00
XE-295161200mg MgSO4, 400mg PSA, 400mg C18 15 AOAC 2007.1 50 $127.00
XE-29517 1200mg MgSO4, 400mg PSA, 400mg C18, 400mg GCB 15 AOAC 2007.1 50 $292.00
XE-29518 900mg MgSO4, 150mg PSA 15 European prEN-15662 50 $105.00
XE-29519 900mg MgSO4, 150mg PSA, 15mg GCB 15 European prEN-15662 50 $116.00
XE-29520900mg MgSO4, 150mg PSA, 45mg GCB 15 European prEN-15662 50 $149.00
XE-29521900mg MgSO4, 150mg PSA, 150mg C18 15 European prEN-15662 50 $116.00
XE-29522900mg MgSO4, 300mg PSA, 150mg GCB 15 NA 50 $204.00
XE-29523 900mg MgSO4, 300mg PSA, 150mg C18 15 - 50 $138.00
6mL SPE Column with PTFE Frits
XE-29524 200mg GCB/400mg PSA 6 Used in Schenck variation 30 $182.00XE-29525 250mg GCB/500mg PSA 6 Used in Schenck variation 30 $204.00XE-29526 500mg GCB/500mg PSA 6 Used in Schenck variation 30 $286.00
Ordering Information
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67
67
67
67
67
67
67
67
6767
6767
6767
67
67
67
67
67
67
67
67
67
67
67
6767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 47Chromatography is our world
3 5
TCLP
XENOSEP TCLP Filters Xenosep offers two types of TCLP filters suitable for use inEPA Method 1311 depending on the analytes of interest. Bothtypes of TCLP filters are binder-free, borosilicate glassmicrofiber filters with an effective pore size of 0.7 +/- .01μm asspecified in the method.
Volatiles
Use Xenosep Standard-Certified TCLP Filters. These filtersare tested for several important parameters and are certifiedto meet the specification above.
Metals or non-volatiles
Use Xenosep acid-washed TCLP filters. These filters arepre-washed in 1N HNO3 acid and then rinsed with deionizedwater according to EPA Method 1311 to save you time, reducewaste and provide low background blank values. A certificateof analysis demonstrating background TCLP metal values isalso included in each box.
Part No. Diameter (mm) Price/100
Standard-Certified TCLP Filters for VolatilesXE-306047 47 $ 43.00
XE-306076 76 $ 54.00
XE-306090 90 $ 65.00
XE-306110 110 $120.00
XE-306125 125 $153.00
XE-306142 142 $175.00
XE-306150 150 $219.00
Ordering Information Ordering Information
Part No. Diameter (mm) Price/100
Acid-Washed TCLP Filters for Metals and Non-Volatiles
XE-307047 47 $ 87.00
XE-307076 76 $109.00
XE-307090 90 $120.00
XE-307110 110 $119.00
XE-307125 125 $165.00
XE-307142 142 $296.00
XE-307150 150 $362.00
EPA Method 1311 (TCLP), Section 4.4:“When evaluating the mobility of metals, filters shall be acid washed prior to use with 1N nitric acid followed bythree consecutive rinses with deionized distilled water (a minimum of 1 L per rinse is recommended).”
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67676767676767
67676767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com48Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
3 6
TSS Filters for Standard Methods 2540 C and 2540 D
Ensure worry free audits by taking the guesswork out of method complianceXenosep TSS Filters are specifically designed to ensurecompliance with the filter preparation requirements ofStandard Methods 2540 C (Total Dissolved Solids Dried at180°C) and Standard Methods 2540 D (Total SuspendedSolids at 103-105°C). We removed the guesswork typicallyassociated with audit checklist question #6 by making thewrinkle side of the filter visibly different than the screen side.Now everyone can clearly see and easily determine whichside needs to face up to ensure compliance.
In addition to more distinguishable filter surface characteristicsshown at left, these 1.5 μm binder-free, fast flowing, fineporosity borosilicate glass microfiber filters have been opti-mized to eliminate pin holing and minimize fiber shedding; twoquality issues known to affect other brands of TSS filters.Xenosep TSS Filters are readily available in the popular sizesbelow for use in a wide variety of CoorsTek chemical-porcelainlabware including Bitumen, Buchner, Gooch, Hirsch, andmany other popular filter holders.
Other sizes are available upon request.
Wrinkle side faces up
Screen side faces down
Part No. Diameter (mm) Fits CoorsTek# Price/100
XE-301020 20 Gooch - 60148 $ 20.00
XE-301021 21 Gooch - 60148 $ 20.00
XE-301024 24 Gooch - 60151 $ 20.00
XE-301025 25 Hirsch - 60299 $ 20.00
XE-301030 30 Gooch - 60153 $ 25.00
XE-301032 32 Bitumen - 60170 $ 25.00
XE-301035 35 Buchner - 60239 $ 25.00
XE-301037 37 Buchner - 60239 $ 25.00
XE-301042 42.5 Hirsch - 60301 $ 27.00
XE-301047 47 Hirsch - 60301 $ 29.00
XE-301055 55 Buchner - 60240 $ 36.00
XE-301070 70 Buchner - 60242 $ 43.00
XE-301090 90 Buchner - 60243 $ 57.00
XE-301110 110 Buchner - 60244 $ 75.00
XE-301125 125 Buchner - 60245 $ 98.00
XE-301150 150 Buchner - 60246 $127.00
Ordering Information
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67676767676767676767676767676767
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 49
• Extract samples 5 times faster, • Distill samples 3 times faster • Significantly lower cost per test
The first SPE filter and glass apparatus specially designedfor dirty wastewater samples.Integral design maximizes filtration efficiency, simplifiesanalyte recovery, and ensures reproducible results.
Step 1Extract 1L sample17 seconds is all it takes to filter a 40 mg/L* OPR and achieve98% recovery. Thatʼs 50 times faster than a typical single layerSPE filter with 89% recovery. In addition, triple layer XenosepSPE Filters have 5 times the filtration capacity already built-infor the MS, MSD, and hard-to-filter samples.*As required by EPA Method 1664A
Step 2Elute and dry extractLess filter clogging enables more efficient filter drying andeluting with less solvent. Xenosep sodium sulfate columnssave time by eliminating off-line drying steps or repouring theextracted water sample back into the separatory funnel.
Step 3Distill and oven dry extractLess extraction solvent means faster distillation. Final hexaneextracts distill to dryness in about 10 minutes. Unique flatsided Xenosep flasks reduce oven drying times by 67% so youget QC tests in the dessicator 3 times faster (see Table 1).
Chromatography is our world
3 7
SPE Systems for EPA Method 1664A
XENOSEP® SPE Systems for EPA Method 1664A
Compare the OptionsProcess Step Xenosep® SPE Typical SPE Hexane LLEExtract-Elute-Dry 8.8 min. 26.5 min. 46.0 min.Distill-Oven Dry 21.0 min. 50.0 min. 60.0 min.Time to Dessicator 29.8 min. 76.5 min. 106.0 min.Estimated Labor/Batch of 20 4 hrs. 6 hrs. 8 hrs.Xenosep Labor Savings/Batch 2 hrs. 4 hrs.
• Short wide funnel for easy access and effective glassware rinsing
• Built in space for optional prefilters,filter aids, and/or drying agent additions to “wet” solids
• Secure coupler maximizes effective filtration area and prevents assembly misalignment
• Teflon ® encapsulated O-ring seal eliminates solvent and vacuum leakswithout extractables
• Solid rimmed stainless steel support prevents analyte bypass
• Flared collection tube for easy removal
• Wider internal diameter stem maximizes filtration rates
• Universal 40/35 joint connects to elution apparatus or standard multi-place manifold, optimized to accept 30mm OD vials or collection tubes
Easy to clean glassware minimizes breakageand fits standard washers
TS
Conditioning/filtration apparatus
• Unique integral apparatus increases productivityand lowers cost per result
• Disposable prepacked sodium sulfate cartridge maximizes recoveries, speed, and eliminates off-line transfers
• Dedicated station for sample elution,drying and CIP (clean-in-place) glassware solvent rinsing
• Universal TS 24/25 joint for collection into standard TS 24/40 flask
• Flat sided flask gently evaporates extract to increase recoveries and lower MDLs
• Compact cross-over condenser design simplifies solvent recovery and provides analyst protection
• Flat sided flask optimized to reduce distillation/evaporation times
• N2 inlet provided for safety and faster distillation/evaporation
Elution/cleaning apparatus
Distillation/Evaporation Apparatus
Table 1
Step 1
Step 2
Step 3
Note: Lab stand and clamps not included
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.com50Chromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
3 8
SPE Systems for EPA Method 1664A
Xenosep® SPE Fast Throughput High Capacity FiltersUnique triple layer construction offers fastest samplethroughput and highest filtration capacity
• No emulsions or Freon® non-compliance• Assure legally defensible data• Achieve higher quality results• Reliable and consistent performance• Decrease sample turnaround time• Eliminate additional prefilter expense• Significantly reduce operating cost
Why are 40 mg/L PAR comparisons important?
EPA Method 1664A requires the PAR concentration as follows:“The weight must be 40 ± 1 mg” (Section 7.10.3 NOTE) and atleast this amount are required for the QCS, OPR, MS, MSD,and IPR samples. (Sections 9.8, 9.7, 9.6.1, 9.3.1, 9.2.2, 7.11and 7.10) Although certain method modifications are allowed,a change in the PAR concentration is not expressly permittedand “shall be considered a major modification subject to appli-cation and approval of alternate test procedures under CFR136.4 and 136.5.” (Sections 1.7 and 1.8)
Why expose the defensibility of your data to unnecessary legalrisk? Use 40 mg/L QC samples and achieve higher qualityresults with Xenosep SPE Filters.
Cutaway views of how the triple layer Xenosep SPE Filterseparates analytes from particulate and unwanted soluble interferences
• Red–Oil and Grease Analytes
• Blue–Soluble Interference
• Green–3 μm Particulates
• Black–8 μm Particulates
• Brown–30 μm Particulates
Filtration Extraction Elution
5-25 μm Prefilter
1-5 μm Prefilter
Adsorbent Layer
0
200
400
600
800
1000
1200
0 1 2 3 4 5 6 7 8 9 10
Time (Minutes)
)Lm( ,deretliF elp
maS
Temperature: 21°C, Vacuum: 15 Hg
Xenosep ® SPE Filters 1 L in 38 Sec. (Recovery 93.4%)
Typical SPE Filters 1 L in 6.5 Min. (Recovery 79.9%)
Sample:40 mg/L* EPA 1664A Std.Plus 14 g of Solids Added
SPE Filters–47 mm Diameter
Filter dirty samples 10 times faster
Extra thick fluffy layersuspends solids filtercake and preventspremature clogging ofdirty samples
0
1
2
3
4
5
6
0 2 4 6 8 10 12 14 16 18 20Time (Minutes)
)L( deretliF dradnatS RAP
)gm( deretliF dradnatS
RAP
Temperature: 21SPE Filters–47 mm Diameter
°C, Vacuum: 15 Hg
Xenosep SPE Filters 1 L in17 Sec. (Recovery 97.6%)
Typical SPE Filters 1 L in 19.2 minutes (Recovery 89.3%)
Xenosep SPE Filters 5.5 Lin 20 Min. (Recovery 95.5%)
40
80
120
160
200
240
Xenosep SPE Filters Have FIVE Times Greater Filtration Capacity
*As required by EPA Method 1664A
SPE speed and filtration capacity 40 mg/L* EPA 1664A PAR standard
Part No. DescriptionPrice(48pk)
XE-24547 SPE Filters, 1664A, 47mm Call
Ordering Information
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67
Chromatography is our world
(800) 572 - 6653 | [email protected] | www.resolutionsys.comChromatography is our world
SPE cartridges are available in a wide variety of
products.
IRIS products.
(800) 572 - 6653 | [email protected] | www.resolutionsys.com 51
Ordering Information
Ordering Information
Ordering Information
Chromatography is our world
3 9
SPE Systems for EPA Method 1664AXenosep SPE Systems for performing EPA Method 1664A areavailable in convenient Starter Kits for laboratories jus tstarting out. Starter Kits include all components required toprocess one sample at a time. Additional components areavailable for scale up as required.
Xenosep Manifold Kits are available for a three positionmanifold and include components necessary to process threesamples at a time.
Part No. Description PriceXE-26616 Starter Kit, 47mm, 1 Place Call
Part No. for Kit Components Included* Qty
XE-26603; XE-26604; XE-26610; XE-26611; XE-26613; XE-26614; XE-26615; XE-26508; XE- 26514; XE-26515; XE-26516; XE-26517
1 each
XE-26608 2 eachXE-26512 3 eachXE-26513 7 each
Part No. Description Qty Price
XE-26511Distillation Kit, Complete Call XE-26513; XE-26514; XE-26515 1 eachXE-26512 3 each
XE-26526Flask Kit, Flat Sided, TS 24/25, 125 mL Call XE-26513 12 each
XE-26600
SPE Filtration Assembly, 47mm, Starter Call XE-26603; XE-26604; XE-26610;XE-26611; XE-26613 1 each
XE-26608 2 each
XE-26601
SPE Filtration Assembly, 47mm, Manifold Call
XE-26603; XE-26605; XE-26610;XE-26611; XE-26613 1 each
XE-26608 2 each
XE-26620Consumables Kit, 24 Tests $172 XE-24547; XE-26520; XE-26524 24 each
Additional apparatus assembly kits
* See Replacement Parts for description
Part No. Description Qty PriceXE-24547 SPE Filters, 1664A, 47mm 48 CallXE-26520 Pipets, Transfer, Polyethylene, 15mL 48 $ 14.00XE-26524 Column, Inline, Sodium Sulfate, 10g 48 $126.00 XE-26528 Fibers, Prefilter, 50g 1 $ 83.00XE-26532 EPA 1664A Std., 1 x 100 mL, 4 mg/mL 1 $ 11.00XE-26533 EPA 1664A Std., 12 x 10 mL, 4 mg/mL 12 $ 5.00
XENOSEP® SPE manifold kit
Part No. Description Price
XE-26618 Manifold Kit, 47mm, 3 Place Call
Part No. for Kit Components Included* CallXE-26615; XE-26512; XE-26516; XE-26519 CallXE-26603; XE-26605; XE-26610; XE-26611; XE-26507; XE-26613 Call
XE-26608 Call
Note: Manifold sold separately
* See Replacement Parts for description
Part No. Description Qty PriceXE-26507 Vials, Collection, 30 x 125mm 1 CallXE-26508 Tube, Collection, 30 x 200mm 1 CallXE-26512 Clamp, Polyoxymethylene Acetal, TS 24/25 1 CallXE-26513 Flask, Flat Sided Erlenmeyer, TS 24/25, 125mL 1 CallXE-26514 Flask, Round Flat Bottom, TS 24/25, 125mL 1 CallXE-26515 Condenser, Crossover w/#2HB 1 CallXE-26516 Eluter, Glass, w/#2HB 1 CallXE-26517 Stopcock, Glass, 120° 3 way, 4mmID 1 CallXE-26519 Stopcock Assembly, Manifold 1 CallXE-26523 Vent Assembly, Manifold 1 CallXE-26603 Funnel, 300 mL, 47mm 1 CallXE-26604 Holder, Starter, 47mm 1 CallXE-26605 Holder, Manifold, 47mm 1 CallXE-26608 O-Rings, FEP-Viton®, Coupler, 47mm 1 CallXE-26610 Coupler, PTFE, 47mm 1 CallXE-26611 Support, Stainless Steel, 47mm 1 CallXE-26613 Clamp, Aluminum, 47mm 1 CallXE-26614 Flask, TS 40/35, 1L 1 CallXE-26615 Tubing, Tygon®, 3/8 ID x 5/8 OD, 3´ 1 CallXE-26619 Manifold, Complete, Stainless Steel, 3 Place 1 Call
Ordering InformationConsumables
Ordering InformationReplacement parts and components
XENOSEP® SPE starter kit
(800) 572 - 6653 | [email protected] | www.resolutionsys.com
67
676767
676767
676767
676767
676767
67
67
67
67
67
676767676767
67
67676767
67676767676767
67676767
676767676767676767
6767
67 6767 67 67
(800) 572 - 6653 • Fax: (616) 396 - 7520 • 590 East 32nd Street, Holland, MI 49423 • [email protected]
www.resolutionsys.com
Resolution Systems is a dedicated to providing consolidated shopping, cost containment, personalized customer and technical service for the chromatography community.