YOU ARE DOWNLOADING DOCUMENT

Please tick the box to continue:

Transcript
Page 1: Resting membranepotential

Department of Life SciencesUniversity of CalicutKerala, India 673 635

Page 2: Resting membranepotential

Electrical potential exist cross the membranes of all cellsSome cells are excitableK+ concentration is greater inside the cell than outsideK+ moves out of the cell Negative ions remain inside which prevent further movement of K+ to the outsidePotential difference in large mammalian neurons is 94mv -negative inside

Na + ions are more outside than inside Membrane is highly permeable to Na+ Na + moves to the inside- inside become more positiveNa + movement makes outside negative and inside positiveNow the potential difference is 61 mv with positive inside

Page 3: Resting membranepotential

Membrane PotentialsResting membrane potential

in a mammalian nerve cell is -90mv

Sodium –potassium pump – Na+ to outside and K+ to inside

Electronegative pump- more positive charge pumped to outside than to inside

3Na+ to outside for 2 K+ to inside

Large concentration gradient of K+ and Na+ inside and outside

Page 4: Resting membranepotential

Electrochemical gradient

Na+ (outside cell) – 142mEq/LNa+ (inside cell) –14mEq/L

K+ (outside cell) – 4mEq/LK+ (inside cell) –140mEq/L

Page 5: Resting membranepotential

Channel proteins in restK+ and Na+ ions leak through channel proteinsPotassium-sodium leak channelsMore K+ leak – 100 times than Na+

Page 6: Resting membranepotential

Channels and pumps

Page 7: Resting membranepotential

Action potentialNerve signals are transmitted by action potentialsAP is a rapid change in the membrane potentialAP spreads rapidly along the nerve membraneSudden change from negative potential to positive

potential

Resting stage

Membrane remain polarised

Postential at this stage is -70mV

Page 8: Resting membranepotential

Depolarisation:Membrane is very permeable to Na+ ions- large number of

Na+ moves into the cellCharge inside become neutralPotential rise in Positive direction – this is called

depolaristion

Some fibers, the potential overshoots and reach positive value

Page 9: Resting membranepotential

RepolarisationThe Na+ channel begin to

closeK+ channels open more

than normalRapid diffusion of K+ to the

exteriorReestablish the normal

negative potential

Page 10: Resting membranepotential

Voltage gated channelsVoltage gated Na+ channels play a major role in

depolarisation and repolarisation during action potential Voltage gated K+ channels also play major role in speeding

up the repolarisationThese are in addition to the Na+-K+ pump and the Na+-K+

leak channels

Page 11: Resting membranepotential

Voltage gated Na+ channels

Page 12: Resting membranepotential

Voltage gated Na+ channel –activation-inactivation

AS voltage reach between -70 and -50- sudden conformational change in activation gate

Gate opensThis is activated state of the gateNa+ flow into the cell Na+ permeability increase 500-5000 foldAfter a few 10,000ths of a second the inactivation gate closesNa+ can not move into the cellRepolarisation starts channels can open only after reaching resting potential

stage

Page 13: Resting membranepotential

Voltage gated K+ channelsDuring resting state the K+ channel remain closedK+ can not pass out of the cell through the membraneAs membrane potential goes up from -90 – gate opens

slowlyK+ diffuse outAs opening of K+ is slow by the Time they are open Na+ channels Begin to closeThis cause repolarisation

Page 14: Resting membranepotential

Action PotentialsAn action potential occurs when there is a reversal of

the normal resting potential, going from negative to positive. Also called depolarization.

Depolarization occurs when a stimulus causes the voltage-gated Na+ channels to open, allowing Na+ to rapidly influx down its concentration gradient.

The sudden in-rush of positive sodium ions reverses the membrane potential for a few milliseconds.

Then the voltage-gated K+ channels open, allowing K+ to rapidly efflux due to its concentration gradient. This brings the membrane back to negative inside and is called repolarization.

Page 15: Resting membranepotential
Page 16: Resting membranepotential

Action PotentialsEven though the voltage has returned to

negative, the membrane is not at resting potential because it now has too much Na+ inside and not enough K+ ions.

The presence of high Na+ inside causes the Na+/K+ pumps to increase by a power of 3. The faster pump rate quickly restores the membrane back to its steady-state resting condition.

Page 17: Resting membranepotential

Sodium channels have 2 gates, a normal voltage (activation) gate (which is closed at rest) and an inactivation gate (which is open at rest). The rapid opening of the voltage gate lets Na+ rush in and depolarizes the cell. This is immediately followed by closing of the inactivation gate which stops the Na+ influx. At the same time the K+ gate opens letting K+ efflux (repolarization).

Widmaier, et al., 2006


Related Documents