Restek’s popular LC Biphenyl phase—available on traditional FPP and SPP core-shell silica—is extremely useful for fast separations in drug, metabolite, and other analyses.
Proven Multiresidue Pesticide Methods and Premixed StandardsRestek’s expert formulations chemists and chromatographers have done your work for you—with guaranteed accuracy and at a lower cost.
QuEChERS Made Even EasierFree-flowing salts in convenient slim packets fit perfectly into tubes and transfer easily and completely.
SSENTIALS
www.restek.com
ESSENTIALS2021.1
Separate a Wider Range of Compounds than Other Phenyl and C18 Chemistries
Products Designed with Your Productivity in Mind
Si
CH3
CH3
O
CH3
CH3
Si O
Available from:LECO Australia Pty Ltd4/10 Salisbury Road, Castle Hill NSW 2154Phone: +61 (0) 2 9849 5900Email: [email protected]
2
Hot Swap Capillary Column NutsUsed with qty. cat.#For use with "compact" Agilent-style ferrules. ea. 22348For use with standard 1/16"-type ferrules. ea. 22347
Note: For proper operation, oven fan must be kept operational during change out or risk of burn may occur.
www.restek.com/GCacc = Less downtime + faster analyses
Visit www.restek.com/gas for our full selection of generators.
Never worry about delayed gas deliveries again! Gas generators offer an unlimited source of high-purity gas, available on demand.
Dependable supply.Consistant purity.Safe and economical.
Restek offers an expansive selection of
Ultra-High Purity Pressure Regulators
for applications requiring gas purities of 99.995% or greater.
Choose between single or dual stage in chrome-plated brass, stainless steel, or Sulfinert treated.
Visit www.restek.com/regulators for the full selection.
All the Parts You Need in One PackageFastPack Inlet Kits for Agilent, PerkinElmer 590/690, and Thermo 1300/1310 GCs• Convenient: no hunting for individual items.• Economical: costs less than the sum of the individual parts.
1 pack includes 5 maintenance kits with a liner, O-ring, septum, inlet seal, and washer.
Liner Type cat.#4 mm Topaz straight inlet liner (4 mm ID, 6.3 mm OD, 78.5 mm long) 211014 mm Topaz single taper inlet liner (4 mm ID, 6.5 mm OD, 78.5 mm long) 211024 mm Topaz straight inlet liner with wool (4 mm ID, 6.3 mm OD, 78.5 mm long) 211044 mm Topaz single taper splitless inlet liner with wool (4 mm ID, 6.5 mm OD, 78.5 mm long) 23258
4 mm Topaz Precision inlet liner with wool (4 mm ID, 6.3 mm OD, 78.5 mm long) 23259
Wrench-Free Capillary Column Installation with Quick-Cooling Fittingsfor Agilent, PerkinElmer 590/690, and Thermo 1300/1310 GCs
Inlet Liner Removal ToolDescription qty. cat.#Inlet Liner Removal Tool 3-pk. 20181
The Claw and The Claw Holder KitDescription qty. cat.#The Claw Holder Kit (includes The Claw and holder) kit 26262
The Claw ea. 26261
Finger-Tight Capillary Column NutsUsed with qty. cat.#For use with "compact" Agilent-style ferrules. 2-pk. 21040
For use with standard 1/16"-type ferrules. 2-pk. 21041
Never worry again about burned fingers or having to wait for the injector to cool down. The Hot Swap capillary column nut allows you to change your capillary column while the injector temp is still hot.
The Claw safely and cleanly removes liners, O-rings, or other small objects from the hot injection port.
Easily remove the liner from the hot injector with our high-temperature silicone Inlet Liner Removal Tool.
No More Burned Fingers
Finger-tight capillary column nuts are an excellent alternative to conventional column nuts. They can be installed by hand without a wrench, and they cool down much faster than conventional fittings, making column and inlet maintenance easier.
Available with CGA, BS, or DIN fittings.
3Packed, PLOT, metal MXT, fused silica... Your next GC column is at www.restek.com/GC
Application-Specific GC Columns—High Quality Columns for Optimal Performance!
Rtx-DHA ColumnsDesigned to meet ASTM and CAN/CGSB method guidelines.
Rtx-BAC Plus ColumnsOptimized for blood alcohol analysis.
Rtx-Dioxin2 ColumnsSpecifically optimized for 2,3,7,8-TCDD and 2,3,7,8-TCDF resolution.
ID df Length Temp. Limits Modification cat.#
0.32 mm
0.10 µm 10 m to 330/380 °C 10292
0.10 µm 10 m to 330/380 °Cwith 2 m x 0.53 mm ID Retention
Gap (connected with SilTite µ-Union connector)
10291
0.10 µm 15 m to 330/380 °C 10294
0.10 µm 15 m to 330/380 °Cwith 2 m x 0.53 mm ID Retention
Gap (connected with SilTite µ-Union connector)
10293
ID df Length Temp. Limits cat.#Rtx-DHA-1000.25 mm 0.50 µm 100 m -60 to 300/340 °C 10148Rtx-DHA-1500.25 mm 1.00 µm 150 m -60 to 280/340 °C 10149Rtx-DHA-500.20 mm 0.50 µm 50 m -60 to 300/340 °C 10147Rtx-5 DHA Tuning Column0.25 mm 1.00 µm 5 m -60 to 325/350 °C 10165
ID df Length Temp. Limits cat.#Rtx-BAC PLUS 10.32 mm 1.80 µm 30 m -20 to 240/260 °C 180040.53 mm 3.00 µm 30 m -20 to 240/260 °C 18005Rtx-BAC PLUS 20.32 mm 0.6 µm 30 m -20 to 240/260 °C 180060.53 mm 1.0 µm 30 m -20 to 240/260 °C 18007
ID df Length Temp. Limits cat.#Rtx-Dioxin20.18 mm 0.18 µm 40 m 20 to 320/340 °C 107590.25 mm 0.25 µm 60 m 20 to 320/340 °C 10758
Restek Porous Polymer Columns Cover a Wide Range of Polarities• The manufacturing process for porous polymer PLOT columns
causes particles to adhere strongly to the walls of the tubing, so there is virtually no particle generation.
• You get reproducible performance from column to column, including selectivity and flow.
• Q-BOND is our most popular and widely used porous polymer for analysis of C1 to C3 hydrocarbons as well as isomers and alkanes up to C10.
Go to www.restek.com/PLOT for our full selection!
MXT-Q-BOND Columns (Siltek-treated, stainless-steel PLOT)df ID Temp. Limits Column Config qty. cat.#20 µm 0.53 mm -60 to 280/300 °C 7" 11-pin cage ea. 7971620 µm 0.53 mm -60 to 280/300 °C 3.5" Coil ea. 79716-273
Rt-Q-BOND Columns (fused silica PLOT)100% divinylbenzene
df ID Temp. Limits qty. cat.#8 µm 0.25 mm -60 to 280/300 °C ea. 19765
Don’t forget the guards and connectors!
Universal "Y" Press-Tight ConnectorsSplit sample flow—perform dual- column confirmation analysis with a single injection.
Rxi Guard/Retention Gap Columns
Deactivation qty. cat.#Undeactivated ea. 20405Undeactivated 3-pk. 20406Deactivated ea. 20405-261Deactivated 3-pk. 20406-261Siltek Deactivated ea. 20485Siltek Deactivated 3-pk. 20486
ID Length OD qty. cat.#0.25 mm 5 m 0.37 ± 0.04 mm ea. 100290.25 mm 5 m 0.37 ± 0.04 mm 6-pk. 10029-6000.32 mm 5 m 0.45 ± 0.04 mm ea. 100390.32 mm 5 m 0.45 ± 0.04 mm 6-pk. 10039-6000.53 mm 5 m 0.69 ± 0.05 mm ea. 100540.53 mm 5 m 0.69 ± 0.05 mm 6-pk. 10054-600
Featured Rtx phases:Rtx-Biodiesel TG ColumnsEngineered specifically for high-performance biodiesel analysis.
4 For our full suite of phases, visit www.restek.com/raptor and www.restek.com/force
CH3
CH3
Si O
Raptor Biphenyl LC Columns (USP L11)ID Length qty. cat.#1.8 µm Particles
2.1 mm
30 mm ea. 930923250 mm ea. 9309252
100 mm ea. 9309212150 mm ea. 9309262
3.0 mm50 mm ea. 930925E
100 mm ea. 930921E2.7 µm Particles
2.1 mm
30 mm ea. 9309A3250 mm ea. 9309A52
100 mm ea. 9309A12150 mm ea. 9309A62
3.0 mm
30 mm ea. 9309A3E50 mm ea. 9309A5E
100 mm ea. 9309A1E150 mm ea. 9309A6E
4.6 mm
30 mm ea. 9309A3550 mm ea. 9309A55
100 mm ea. 9309A15150 mm ea. 9309A65
5 µm Particles
2.1 mm50 mm ea. 9309552
100 mm ea. 9309512150 mm ea. 9309562
3.0 mm
30 mm ea. 930953E50 mm ea. 930955E
100 mm ea. 930951E150 mm ea. 930956E
4.6 mm
50 mm ea. 9309555100 mm ea. 9309515150 mm ea. 9309565250 mm ea. 9309575
Superficially porous particles that boost UHPLC efficiencies further for high-throughput LC-MS/MS.
Fully porous particles that easily and fully scale from HPLC to UHPLC.
Si
CH3
CH3
O
Learn more about the time-tested Biphenyl phase at www.restek.com/biphenyl
The Restek Biphenyl is the Right LC Column in Any Format:Separates a wider range of compounds than other phenyl and C18 chemistries. Extremely useful for fast separations—even with isobars—in drug, metabolite, and other analyses. Our most popular LC phase, Biphenyl is available on tradi-tional FPP and SPP core-shell silica.
Force Biphenyl LC Columns (USP L11)ID Length qty. cat.#1.8 µm Particles
2.1 mm30 mm ea. 962923250 mm ea. 9629252
100 mm ea. 9629212
3.0 mm50 mm ea. 962925E
100 mm ea. 962921E3 µm Particles
2.1 mm
30 mm ea. 962933250 mm ea. 9629352
100 mm ea. 9629312150 mm ea. 9629362
3.0 mm50 mm ea. 962935E
100 mm ea. 962931E150 mm ea. 962936E
4.6 mm100 mm ea. 9629315150 mm ea. 9629365
5 µm Particles
2.1 mm50 mm ea. 9629552
100 mm ea. 9629512150 mm ea. 9629562
3.0 mm50 mm ea. 962955E
100 mm ea. 962951E150 mm ea. 962956E
4.6 mm100 mm ea. 9629515150 mm ea. 9629565250 mm ea. 9629575
EXP In-Line Holder
Connects to any HPLC, UHPLC, injection, or switching valves with 1/16" stainless-steel tubing; ideal when using online trapping and preconcentration techniques.
Description qty. cat.#EXP In-Line Holder for EXP Guard Cartridges (includes hex-head fittings & 2 ferrules) ea. 25751
EXP Direct Connect HolderFree-Turn architecture lets you change cartridges by hand without breaking inlet/outlet fluid connections.
Description qty. cat.#EXP Direct Connect Holder for EXP Guard Cartridges (includes hex-head fitting & 2 ferrules) ea. 25808
5For helpful maintenance videos and tips, plus a full list of replacement parts, visit www.restek.com
Protect and Extend the Lifetime of Your Biphenyl Analytical Column with EXP Guard Cartridges• Free-Turn architecture lets you change cartridges by hand without breaking inlet/outlet fluid connections—no tools needed.• Patented titanium hybrid ferrules can be installed repeatedly without compromising high-pressure seal.• Auto-adjusting design provides ZDV (zero dead volume) connection to any 10-32 female port.• Guard column cartridges require EXP direct connect holder (cat.# 25808).
Force Biphenyl EXP Guard Column Cartridges
Size qty. cat.#5 x 2.1 mm 3-pk. 9629502525 x 3.0 mm 3-pk. 9629502535 x 4.6 mm 3-pk. 962950250
Maximum cartridge pressure: 600 bar/8700 psi.
Raptor Biphenyl EXP Guard Column CartridgesParticle Size Size qty. cat.#UHPLC 5 x 2.1 mm 3-pk. 9309U0252UHPLC 5 x 3.0 mm 3-pk. 9309U02532.7 µm 5 x 2.1 mm 3-pk. 9309A02522.7 µm 5 x 3.0 mm 3-pk. 9309A02532.7 µm 5 x 4.6 mm 3-pk. 9309A02505 µm 5 x 2.1 mm 3-pk. 9309502525 µm 5 x 3.0 mm 3-pk. 9309502535 µm 5 x 4.6 mm 3-pk. 930950250
Maximum cartridge pressure: 1034 bar/15,000 psi* (UHPLC), 600 bar/8700 psi (2.7 µm); 400 bar/5800 psi (5 µm)* For maximum lifetime, recommended maximum pressure for UHPLC particles is 830 bar/12,000 psi.
For use with 3 or 5 μm Force LC columns. For 1.8 μm Force columns, use a 0.2 μm UltraShield filter.
For more LC maintenance kits, visit www.restek.com/LCmaintenance
Autosampler Preventive Maintenance KitIncludes Similar to Part # cat.#Rotor seal; piston seals (2); needle assembly; needle seat; finger caps (3) Agilent G1313-68709 25271
Simplify Your Routine LC Maintenance with These Handy Kitsfor Agilent 1100, 1200 HPLC Systems
Pump Maintenance KitIncludes Similar to Part # cat.#Sapphire plunger (2); piston seals (2); outlet ball check valve; active inlet cartridge; PTFE frits (5) Agilent 5065-4499 25915
Pump PM KitIncludes Similar to Part # cat.#PTFE frits (2); outlet cap; gold disk seal; active inlet cartridge; piston seals (4); glass solvent filters (2) Agilent G1311-68710 25270
• Significant savings over instrument manufacturer prices.• High quality components in every kit.
UltraShield UHPLC PreColumn Filter—for 1.8 µm Force Columns
Porosity qty. cat.#0.5 µm frit ea. 249950.5 µm frit 5-pk. 249960.5 µm frit 10-pk. 249970.2 µm frit ea. 258090.2 µm frit 5-pk. 258100.2 µm frit 10-pk. 25811
6
Extend Air Canister and Valve Lifetime– RAVEqc Valves No Wrenches Mean No Overtightening or Cross-Threading Damage
• Simplify your workflow—tool-free design makes it fast and easy for anyone to make consistent, quality connections.
• Check status at a glance—if the parts are connected, the valve is open; if they’re apart, it’s closed.
• Great for attaching air canisters to the wide variety of devices used to sample and analyze air samples.
For standards, sample prep, air sampling, and more: www.restek.com/sample-handling
Quickly and Precisely Verify Vacuum/Pressure Flow Rates Before Going into the Field—Alicat Whisper Flow Calibrators• Real-time calibration of controllers, passive sampling kits, canisters, pumps, and more.• Measure absolute pressure, mass flow, volumetric flow, and temperature for 98 different gases.• Available in lab-based and portable models.
View more product details and a list of programmed gases at www.restek.com/alicat
Description Certification/ Compliance Dimensions Flow Capacity Type qty. cat.#
Portable Mass Flow Calibrator, Whisper Series
CE, NIST 5.7" h x 2.4" w x 1.1" d 0–50 sccm Color Display ea. 27330CE, NIST 5.7" h x 2.4" w x 1.1" d 0–50 sccm Monochrome Display ea. 27331CE, NIST 5.7" h x 2.4" w x 1.1" d 0–500 sccm Color Display ea. 27332CE, NIST 5.7" h x 2.4" w x 1.1" d 0–500 sccm Monochrome Display ea. 27333
Lab-Based Mass Flow Calibrator, Whisper Series
CE, NIST 4.1" h x 2.4" w x 1.1" d 0–50 sccm Color Display ea. 27334CE, NIST 4.1" h x 2.4" w x 1.1" d 0–50 sccm Monochrome Display ea. 27335CE, NIST 4.1" h x 2.4" w x 1.1" d 0–500 sccm Color Display ea. 27336CE, NIST 4.1" h x 2.4" w x 1.1" d 0–500 sccm Monochrome Display ea. 27337
RAVEqc Quick-Connect Air Valves
Description Material Similar to Part # cat.# / ea.Male RAVEqc Valve to ¹/4” Male Compression Fitting
Stainless Steel Entech MQT-400 27367Siltek Treated Entech MQT-400S 27368
Female RAVEqc Valve to ¹/4” Male Compression Fitting
Stainless Steel Entech FQT-400 27369Siltek Treated Entech FQT-400S 27370
Male RAVEqc Valve to ¹/4” Tube End Fitting, Extended (1.58”)
Stainless Steel Entech MQT-T400 27371Siltek Treated Entech MQT-T400S 27372
Male RAVEqc Valve to ¹/4” Tube End Fitting, Short (1.23”)
Stainless Steel Entech MQT-ST400 27373Siltek Treated Entech MQT-ST400S 27374
Female RAVEqc Valve to ¹/4” NPT Fitting
Stainless Steel 27365Siltek Treated 27366
Independently manufactured by two different sources. Pi-marked available for EU. Drop-shipped for maximum shelf life.
High Pressure Sample Cylinders• 304 L stainless steel.
• DOT rating to 1800 psig (TPED cylinders to 1450 psig).
• TPED-compliant cylinders available for EU community.
2nd Source Gas Calibration Standards
www.restek.com/2ndsource
Find more cylinder sizes at www.restek.com/sample-handling
Certification/Compliance Material Max
Pressure Volume cat.#
Stainless Steel 1800 psig 300 cc 22923Stainless Steel,
Sulfinert Treated 1800 psig 300 cc 24132
TPED (Pi) compliant
Stainless Steel 1450 psig 300 cc 22923-PIStainless Steel,
Sulfinert Treated 1450 psig 300 cc 24132-PI
Stainless Steel 1800 psig 500 cc 22924Stainless Steel,
Sulfinert Treated 1800 psig 500 cc 24133
TPED (Pi) compliant
Stainless Steel 1450 psig 500 cc 22924-PIStainless Steel,
Sulfinert Treated 1450 psig 500 cc 24133-PI
7
Get a Quicker Cleanup:Resprep SLE Cartridges and 96-Well Plates• Just load, wait 5 min, then elute.• Removes proteins,
phospholipids, and salts.
Great data starts with great sample prep. Get yours at www.restek.com/sample-handling
Mass spec, FID, ECD — www.restek.com/GCacc has the replacement parts your detectors need. www.restek.com/proezgc
Includes Certification/Compliance qty. cat.#15 mL four-place tube holder (6); 50 mL single-place tube holder (6); 50 mL conical tube insert (6); 2 mL tube adaptors (24); U.S. power cord (1); global/universal power cord (1)
UL61010-1/CSA C22.2 No. 61010-1 and IEC61010-2-020; FDA listed; MET U.S. E112532; CE; RoHS
ea. 28295
New! Q-sep Multispeed Centrifuge for QuEChERS• Program up to 10 custom cycles or use QuEChERS-specific presets.• Lid lighting indicates at a glance if unit is ready, running or done.• Cool-Flow design prevents samples from overheating.
For ready-to-use dSPE tubes and other QuEChERS products, visit www.restek.com/quechers
QuEChERS Made Even EasierQ-sep QuEChERS Sample Prep Extraction Salts & TubesFree-flowing salts in convenient slim packets fit perfectly into tubes and transfer easily and completely.
Description Material Method qty. cat.#
Q-sep QuEChERS Extraction Kit 4 g MgSO4, 1 g NaCl with 50 mL Centrifuge Tube Original unbuffered 50 packets & 50 tubes 25848
Q-sep QuEChERS Extraction Kit 4 g MgSO4, 1 g NaCl, 1 g TSCD, 0.5 g DHS with 50 mL Centrifuge Tube European EN 15662 50 packets & 50 tubes 25850
Q-sep QuEChERS Extraction Kit 6 g MgSO4, 1.5 g NaOAc with 50 mL Centrifuge Tube AOAC 2007.01 50 packets & 50 tubes 25852
DHS – disodium hydrogen citrate sesquihydrate; MgSO4 – magnesium sulfate; NaCl – sodium chloride; NaOAc – sodium acetate; TSCD – trisodium citrate dihydrate
Resprep Polymeric SPE Offers an Alternative to Silica-Based Sorbents.
Find our full selection of Resprep Polymeric
SPE products at www.restek.com/resprep
Five distinct packings:
• HLB—for general purpose• MAX—for acids• MCX—for bases• WAX—for strong acids• WCX—for strong bases
Cartridgesfor high loading capacity
30 mg/1 mL60 mg/3 mL
200 mg or 150 mg, 6 mL500 mg/6 mL
96-Well Platesfor high throughput
and automation10 mg/2 mL30 mg/2 mL
• Silica-free, bonded polymeric material.
• High surface area.
• Stable over a wide pH range (0–14).
Resprep Quick-Replace SPE Vacuum Manifolds
Description Size qty. cat.#Resprep QR-12 Quick-Replace vacuum manifold 12-port kit 28298-VM
Resprep QR-24 Quick-Replace vacuum manifold 24-port kit 28299-VM
Learn more at www.restek.com/ResprepSLE
Order today at www.restek.com/ResprepQR
Description qty. cat.#Resprep SLE cartridges, 200 mg/3 mL cartridge 50-pk. 28302Resprep SLE cartridges, 400 mg/3 mL cartridge 50-pk. 28303Resprep SLE 96-well plates, 200 mg/2 mL each well 1-pk. 28304Resprep SLE 96-well plates, 400 mg/2 mL each well 1-pk. 28305
Questions? Contact us or your local Restek representative (www.restek.com/contact-us).Restek patents and trademarks are the property of Restek Corporation. (See www.restek.com/Patents-Trademarks for full list.) Other trademarks in Restek literature or on its website are the property of their respective owners. Restek registered trademarks are registered in the U.S. and may also be registered in other countries. To unsubscribe from future Restek communications or to update your preferences, visit www.restek.com/subscribe To update your status with an authorized Restek distributor or instrument channel partner, please contact them directly.
© 2020 Restek Corporation. All rights reserved. Printed in the U.S.A.
www.restek.com Lit. Cat.# GNES3463-UNV
Full compound lists and transition tables are available at www.restek.com/multiresidue
Accurately Quantify 380 Pesticides Using LC-MS/MS and GC-MS/MSwith Restek’s Multiresidue Pesticide CRM Kits• Comprehensive lists of pesticides of global concern.
• Formulated for maximum long-term stability.
• Manufactured and QC tested in our ISO-accredited labs.
GC Multiresidue Pesticide Kit
Conc. in Solvent CRM?Min Shelf Life on Ship Date
Shipping Conditions Storage Temp. qty. cat.#
Contains 1 mL each of these mixtures. Yes 6 months Ambient 10 °C or colder kit 32562
LC Multiresidue Pesticide Kit
Conc. in Solvent CRM?Min Shelf Life on Ship Date
Shipping Conditions Storage Temp. qty. cat.#
Contains 1 mL each of these mixtures. Yes 6 months Ambient –20 °C or colder kit 31971
Labeled Pesticide Residue Internal Standards for Food Analysis • Isotopically labeled to provide the best approach for pesticide
residue quantification.
• Multiple options let you choose internal and surrogate standards that will mitigate matrix effects.
• Compatible with both LC-MS and GC-MS applications; even helpful for optimizing LC-MS/MS system performance.
• Certified reference material (CRM) manufactured and QC-tested in Restek’s ISO-accredited labs—satisfy your ISO requirements.
Description CAS # Conc. in SolventMin Shelf Life on Ship Date
Max Shelf Life on Ship Date
Shipping Conditions Storage Temp. qty. cat.#
Atrazine-d5 163165-75-1 100 µg/mL in acetonitrile, 1 mL/ampul 6 months 36 months Ambient 10 °C or colder ea. 31984Carbaryl-d7 362049-56-7 100 µg/mL in acetonitrile, 1 mL/ampul 6 months 31 months Ambient 10 °C or colder ea. 31985Diazinon-d10 (diethyl-d10) 100155-47-3 100 µg/mL in acetonitrile, 1 mL/ampul 6 months 36 months Ambient 10 °C or colder ea. 31986
Dichlorvos-d6 203645-53-8 100 µg/mL in acetone, 1 mL/ampul 3 months 12 months Ambient 10 °C or colder ea. 31987Dimethoate-d6 1219794-81-6 100 µg/mL in acetonitrile, 1 mL/ampul 6 months 36 months Ambient 10 °C or colder ea. 31988Diuron-d6 1007536-67-5 100 µg/mL in acetonitrile, 1 mL/ampul 6 months 31 months Ambient 10 °C or colder ea. 31989Linuron-d6 1219804-76-8 100 µg/mL in acetonitrile, 1 mL/ampul 6 months 31 months Ambient 10 °C or colder ea. 31990
Restek is Your Complete Supplier for World-Class LC-MS/MS and GC-MS/MS Multiresidue Pesticide Analysis.
We carry certified reference materials, analytical columns, sample preparation products, and accessories.
Visit www.restek.com/food-safety for a full list of products.