RE
MO
TE S
TAR
TER
WIT
H U
NIV
ER
SA
L B
YPA
SS
MO
DU
LEI D W N
Your system includes:1-Main Control Module
with On-board Relay and Bypass Module1-Two Button Remote Transmitter1-9-Pin Wire Harness 1-4-Pin Wire Harness 1-Hood Pin Switch1-Warning Sticker for Under he Hood6-Heavy Gauge Wires
•••••
5
Transponder Key
You will not need to purchase part 791 for this is already built into the RS82B remote starter.
12
3
FOR LARGE GUAGE IGNITION AND BATTERY WIRES
FOR LARGE GUAGE IGNITION AND BATTERY WIRES
andin the posi ions
at the rear part of the unit.
side marked “+”
side marked “-”
side marked “+”side marked “-”
FOR THE 9 PIN HARNESS
Caution: Please check the position of the parking light switchon the back of the control module before the wire connection is made.
Connect the (BROWN) wire from the 9 pin harness to the vehicles parking light wire.
FOR THE 9 PIN HARNESS
( )
12
B
/Ignition #3 output 200MA
external
FOR THE 9 PIN HARNESS
factory remote’s
Door Lock m
otor wire
17-19
16
On the Blue / Black brake wire in the 9 pin harness.
IMPORTANT NOTICE:
Ground86
30
87a
8785Tie into heavy
white wire on4-relay harness
86
30
87
8785
INITIALIZATION PROCEDURE WHEN FIRST POWERED UP
14
and will respond to three (-) pulses to the blue (ama) wire in the 9 pin harness or three presses of the factory remotes lock button if hooked up.
motor
motor
The unit is now in aftermarket alarm mode and will
motorrespond to one (-) pulse of the blue (ama) wire in the 9 pin harness.
BULLDOG
three times remote
remote
14
27
B
B
B
BOX
again,
Inc
BOX
MEMO
29
MEMO
30