198
REFERENCES
1. S W Dean, "Environment - Sensitive Fracture: Evaluation and Comparison of Test
Methods", ASTM, STP 821,1982.
2. Designer's Guide to Fracture Mechanics, National Engineering Laboratory, and
Glasgow.
3. B Cotterell, 'The Past Present And Future of Fracture Mechanics", Engineering
Fracture Mechanics, Vol 69,2002, pp 533-553.
4. S Shyam Sundar, "WTC Investigation Status", A Report By Building And Fire
Research Laboratory, NIST, U S, 2004, pp 1-66.
5. Felkins and A Jankovic, 'The Royal Mail Ship Titanic: Did a Metallurgical Failure
Cause a Night to Remember", Journal of Material Science, Vol 50,1998, pp 12-18.
6. E T Wessel & F J Loss, "Elastic Plastic Fracture Test Methods: The User's
Experience", ASTM STP 856.
7. I Latzko, "Post Yield Fracture Mechanics", Applied Science Publishers, Ltd,
England, 1979.
8. S A Meguide, "Engineering Fracture Mechanics", Elsever Applied Science, London
and New York.
9. Irwin G R and de Wit R, "A Summary of Fracture Mechanics Concepts," Journal of
Testing and evaluation, JTEVA, Vol.11, No. 1, Jan. 1983, pp, 56-65.
10. Fracture Toughness, Iron and Steel Institute, London
11. W F Brown, "Review of Developments in Plane Strain Fracture Toughness Testing",
ASTM STP 463.
12. W F Brown and John E, "Plane Strain Crack Toughness of High Strength Metallic
Materials", ASTM STP410.
13. Rapid Inexpensive Test For Determining Fracture Toughness, National Material
Advisory Board, National Academic of Science, Washington D.C, 1976.
14. Boresenko, "High Temperature Protective Coatings", is preceding the fifth all union
conference Heat resistance Coatings, KHAR'KOV, May 12-16,1970.
15. Y C Chi, S Lee, K Cho and J Duffy, "The Effects of Tempering and Test
Temperature on the Dynamic Fracture Initiation Behavior of an AISI 4340 VAR
Steel", Material Science and Engineering, A114, 1989, pp 105-126.
16. T A Siewert, M.P. Manahan, J.M. Holt, and E.A. Ruth, "History and Importance of
Impact Testing", Pendulum Impact Testing: A Century of Progress, ASTM STP
1380, 1999.
199
17. John M Barsom And S T Rolfe, "Correlation between Kjc Charpy notch test results
in the transition temperature range", "Impact Testing of Metals", ASTM STP
466,1970, pp 281-302.
18. C F Hickey, "Toughness Data for Monolithic High Hardness Armor Steel", Fatigue
and Fracture Toughness - A Cryogenic Behavior, ASTM STP 556,1974. pp 55-67.
19. John M Barsom, U. S. Steel Research, "Development of AASHTO fracture-
toughness requirements for bridge steels". Engineering Fracture Mechanics, vol-7,
Pergamon Press., Great Britain, 1975, pp 605-608.
20. Norris D M, Reaugh, J E And Server W L, "A Facture-Toughness correlation
based on charpy initiation energy". Fracture Mechanics, Thirteenth Conference,
ASTM STP 743, Richard Robert Ed, 1981, pp 207-217.
21. B Tanguy, J Besson, R Piques, A Pineau, "Ductile To Brittle Transition Of A508
Steel Characterized By Charpy Impact Test" Engineering Fracture Mechanics, Vol
72,2005, pp 49-72.
22. Mikhail A Alkolov and Randy K Nanstad, "On the Impact Testing of Subsize
Charpy V-Notch Type Specimens", Effects of Radiation on metals: 17* Volume,
ASTM STP 1270,1995.
23. Subhash R Pati, "Fracture Toughness Determination from Side Grooved Pre Cracked
Charpy Specimens", Combustion Engineering, Inc, Windsor, Connecticut, USA.
24. Marandet B and Sanz. G, "Evaluation of the toughness of thick medium-strength
steels by using Linear-Elastic Fracture Mechanics and Correlations between Kic
and Charpy V Notch", "Flaw Growth and Fracture", ASTM STP 631,1977, pp 72-
95.
25. J G Kaufman and S F CoUis, "A Fracture Toughness Data Bank", Journal of Testing
and Evaluation, Vol 9, No 2, March 1981, pp 121-126.
26. Robert Moskovic, "Statistical Analysis of Censored Fracture Toughness Data in the
Ductile To Brittle Transition Temperature Region", Engineering Fracture
Mechanics, Vol 44,1993, pp 21-41.
27. Milne and D A Curry, "The Effect of Triaxialty on Ductile Cleavage Transitions In
A Pressure Vessel Steel", Central Electricity Laboratories, Materials Division,
Leatherhead, Surrey, UK.
28. D Munz and H P.Keller, "Effect of Specimen Size on Fracture Toughness in the
Ductile Brittle Transition Region of Steel", German Aerospace Research
Establishment, Cologne.
200
29. P M S T De Castro, J Suprrier and P Hancock, "Correlation Between Thickness and
Crack Length As A Means Of Achieving Plane Strain Conditions", Department Of
Materials, Cranfield Institute of Technology, Cranfield, Bedford, MK43 OAL, UK.
30. D Rhodes, L E Culver and J C Radon, " The Influence Of Fracture Mode Transition
On The Compliance Of Thin Section Fracture Specimens", Department of
Mechanical Engineering, Imperial College of Science & Technology, Exhibition
Road, London.
31. Campbell J E, " Fracture Toughness of High Strength Alloys at Low Temperature- A
review". Fatigue And Fracture Toughness - A Cryogenic Behavior, ASTM STP
556,1974. pp 3-25.
32. Folch L C A. And F M Burdekin, "Application of Coupled Brittle- Ductile Modes to
Study Correlation between Charpy Energy and Fracture Toughness Values",
Engineering Fracture Mechanics, Vol 63,1999, pp 57-80.
33. Dewei Tian, L Pentti and Xiaofeng Chen, "Cleavage Fracture Model for Granular
Bainite in Simulated Coarse Grained Heat Affected Zones of High Strength Low
Alloyed Steels", JSME International Journal, Vol 40,1997, pp 179-188.
34. Helmut Klocker and Viggo, "Void Growth And Coalescence in Metals Deformed at
Elevated Temperatures", International Journal of Fracture, Vol 106, 2000, pp 259-
276.
35. Marc Scibetta, "Ph.D Thesis on Contribution to the Evaluation of the
Circumferentially Cracked Round Bar for Fracture Toughness Determination of
Reactor Pressure Vessel Steels". March 1999.
36. Roy L Hewitt, "Acuracy And Precision Of Crack Length Measurements Using A
Compliance Technique", Journal of Testing and Evaluation JTEVA. Vol.11. No.2
March 1983, pp. 150-155.
37. Ulrich Eisele, Eberhard Roos, Horst Slicher. "A Method for the Defined Fatigue
Precracking of Round Notched Bars". Journal of Testing and Evaluation JTEVA.
Vol-13, Jan-1985, pp. 46-48.
38. Arthur J Bush. "Experimentally determined stress intensity factors for single-edge-
crack round bars loaded in bending". Experimental Mechanics. Vol.16, Julyl976,
pp.249-280.
39. Bush AJ, "Stress Intensity Factors for Single-edge-crack Solid and Hollow Round
Bars Loaded in tension," Journal of Testing and Evaluation JTEVA, Vol9, July
1981, pp. 216-223.
201
40. D J Cartwright, P.Rooke. "Evaluation of stress intensity factors". Journal of Strain
Analysis. Vol-10,1975, pp.217-224.
41. Mohamed A Mahamoud, "Stress Intensity Factors For Single and Double Edge
Cracks in a Simple Beam Subjected To a Moving Load", International Journal of
Fracture, Vol 111,2001, pp 151-161.
42. HoUstein, T.Schmitt and J G Blauel, "Numerical Analysis Of Ductile Fracture
Experiments Using Single Edged Notched Tension Specimens", Journal of Testing
and Evaluation JTEVA. Vol.11. No.3, May 1983, pp. 176-181.
43. O E K Daoud, D J.Cartwright, M Carney. "Strain-Energy Release Rate for a Single-
Edge-Cracked Circular Bar in Tension". Journal of Strain Analysis Vol-13, 1978, pp.
83-89.
44. J C Devaux and G Rousselier, " An Experimental Program For The Validation Of
Local Ductile Fracture Criteria Using Axisynmietrically Cracked Bars And Compact
Tension Specimens", Engineering Fracture Mechanics, Vol. 21,1985, pp.273-283.
45. T Nakamura, C F Shih and L B Freund, " Elastic- Plastic Analysis Of A
Dynamically Loaded Circumferentially Notched Round Bar", Engineering Fracture
Mechanics, Vol. 22 ,1985, pp.437-452.
46. Y Z Itoh, T Murakami and H Kashiwaya, " Approximate Formulae For Estimating
The J-Integral Of A Circumferentially Cracked Round Bar Under Tension Or
Torsion", Engineering Fracture Mechanics, Vol. 31,1988, pp.967-975.
47. H L Stark and R N Ibrahim, " Estimating Fracture Toughness From Small
Specimens", Engineering Fracture Mechanics, Vol. 25 ,1986, pp.395-401.
48. Susil K Putatunda, S K, Rigsbee, J M, and Corted H T, "Effect of Size on Elastic-
Plastic Fracture Toughness Parameters," Journal of Testing and Evaluation, JTEVA,
Vol. 13, No.3, May 1985, pp. 181-190.
49. N G Awadalla, R L Sindelar, G A Abramczyk, "Fracture Toughness Of Type 304
Stainless Steel", Technical Report, Reactor Materials Program, sept. 1986.
50. G G Chell, "Fracmre Mechanics in the Elastic-Plastic Regime", Materials Division,
Central Electricity Research Laboratories, Surrey, UK.
51. O L Towers and S J Garwood, 'The Geometry Dependence and Significance of
Maximum Load Toughness Values", The Welding Institute, Cambridgeshire, UK.
52. D T Read and R P. Reed, "Effects of Specimen Thickness on Fracture Toughness of
an Aluminum Alloy", International Journal of Fracture, Vol.13, April 1977, pp.201-
213.
202
53. Shoji T, "Determination of Crack Tip Energy Dissipation and Elastic Plastic Fracture
Toughness Parameter with Ductile Crack Extension", Journal of Testing and
Evaluation JTEVA. Vol.9 No.6Jan. 1981, pp. 324-334.
54. Jennifer Cordes and Rahmi Yazici, "Evaluation of Elastic - Plastic Fracture In
Aluminum Panels", Engineering Fracture Mechanics, Vol. 47,1994, pp.441-449.
55. Ashok Saxena and S J Hudak," Review and Extension of Compliance Information
for Conmion Crack Growth Specimens", International Journal of Fracture, Vol.14,
October 1978, pp.453-468.
56. C M Branco, J C Randon and L E Culver " Elastic Plastic Fatigue Crack Growth
Under Load Cycling", Journal Of Strain Analysis, Vol.12, No.2,1977,pp.71-80.
57. Bing Liu and Hidetoshi Kimoto, "Elastic - Plastic Analysis of a Crack Parallel to the
Interface", Engineering Fracture Mechanics, Vol. 53,1996, pp.607-623.
58. J H Kuang and Y C Chen, 'The Values of J- Integral within the Plastic Zone",
Engineering Fracture Mechanics, Vol. 55,1996 pp.869-881.
59. J Morrison and K J Karisallen, "An Experimental Comparision of J and CTOD
Estimation Formulas", Engineering Fracture Mechanics, Vol. 51,1995 pp. 145-149.
60. Ivanov, "Protective coatings in modem technology". Proceedings of the Fifth All-
Union Conference on Heat Resistant Coatings, Khar'kov, 1970, pp 1-7.
61. Robert L Johnson, "A Systems Rationale For The Selection or Design Of
Tribological Surface Coatings", Thin Solid Films, Vol 73,1980, pp 235-244.
62. Fastener Corrosion, Technical Note, Light Gauge Steel Engineers Association,
Washington DC, 1999.
63. John A Nairn and Sung Ryong Kim, " A Fracture Mechanics Analysis Of Multiple
Cracking In Coatings", Engineering Fracture Mechanics, Vol. 42 ,1992, pp. 195-208.
64. Sung Ryong Kima and John a Nairn, "Fracture Mechanics Analysis of Coating/
substrate systems Parti: Analysis of Tensile and Bending Experiments", Engineering
Fracture Mechanics, University of Utah., USA, 1999,1-24.
65. Sung Ryong and John a Nairn, "Fracture Mechanics Analysis of Coating/ substrate
systems Part 2: Experiments in Bending", "Engineering Fracture Mechanics",
University of Utah., USA, 1999, pp 1-25.
66. C Guzman, N Diaz, J A Berrios. "Fatigue Properties of SAE 4340 steel coated with a
Nimet HP Autocatalytic Nickel Deposit". Surface and Coating Technology, 2000, pp
561-571.
203
67. Y Z Zhang , Y Y Wu and M Yao, " Fatigue Properties of Electroless Deposited
Steel", Journal Of Material Science Letters, Vol.15,1996, ppl364-1366.
68. M P Taylor, H E Evans, C B Ponton. "A Method for evaluating the creep properties
of overlay coatings". Surface and Coatings Technology, 2000, pp. 13-18.
69. Weifang Zhang, Yunju Li, Gaoyuan Liu, " Recrystallization And Fatigue Failure Of
DS Alloy Blades", Engineering Failure Analysis, Vol.11,2004, pp.429-437.
70. Dr Yong-Qiu Jiang, "Fracture Analysis and Design of Protective Coatings on
Polymers, Metals and Ceramics", Mechanical Engineering Seminars, 2005.
71. J J Vlassak, "Channel Cracking in Thin Films on Substrates of Finite Thickness",
Technical Report, Division of Engineering And Applied Sciences, Harvard
University, Cambridge, USA, 2005.
72. G Qian, T Nakamura and S H Leigh, 'Tensile Toughness Test and High
Temperature Fracture Analysis of Thermal Barrier Coatings", Acra Materials, Vol
45,1997, pp 1767-1784.
73. H Ashassi-Sorkhabi, A Hagrah and J Manzoori," Zinc-Nickel Alloy Coatings
Electrodeposited From a Chloride Bath Using Direct and Pulse Current", Surface
And Coatings Technology, Vol 140,2001, pp 278-283.
74. Evangelos Tzimas and George Papadimitrion, "Cracking Mechanisms in High
Temperature Hot-Dip Galvanized Coatings", Surface and Coatings Technology,
Vol.145,2001, pp. 176-185.
75. Y C Zhou, T Tonomori and T Hashida, "Fracture Characteristics of Thermal Barrier
Coatings after Tensile and Bending Tests", Surface and Coatings Technology, Vol
157,2003, pp 118-127.
76. Shyang ho Chi and Yen Ling Chung, "Cracking in Coating-Substrate Composites
with Multi Layered and FGM Coatings", Engineering Fracture Mechanics, Vol 70,
2003, pp 1227-1243.
77. H O Fuchs, 'The Effect of Self Stress on High Cycle Fatigue", Journal of Testing
and Evaluation, Vol 10, No 4,1982, pp 168-173.
78. Throop J F "Fracture Mechanics Analysis of the Effects of Residual Stress On
Fatigue Life", Journal of Testing and Evaluation JTEVA. Vol.11. No.l Jan. 1983, pp.
75-78.
79. S H Kang, S W Han, G M Webster and G E Totten, "Successfiil Use of Polymer
Quenchants with Crack Sensitive Steels: Part H- Manufacturing of Hexagon nut
Punch Pin", Kum Won Industrial Co. Ltd., Chungnam, Korea.
204
80. Zbigniew Gawronski, "Residual Stresse4s in the Surface Layer of M2 Steel after
Conventional and Low Pressure Nitriding Processes", Surface and Coatings
Technology, Vol.124,2000, pp. 19-24.
81. Chobin Makabe, Takashi Makishi, and Hideo Kaneshiro, "Fatigue Mechanism of
lon-Nitrided Low Carbon Steel", Journal of Testing and Evaluation JTEVA. Vol.30.
No.5 Sept.2002, pp. 408-414.
82. T V Duggan, C Dimbylow and R Jones, 'Fatigue Studies of A High Strength Age
Hardening Wrought Cu-Ni Alloy", AMTE Dockyard Laboratories, Portsmouth, UK.
83. Neimitz, I dzioba and J Galkiewicz, "A Study of Stable Crack Growth Using
Experimental Methods, Finite Elements and Fractography ", Engineering Fracture
Mechanics, Vol. 71,2004, pp.1325-1355.
84. Hai Qiu, Manabu Fnoki, Yoshiaki and Teruo Kishi, " A Model For The Static
Fracture Toughness Of Ductile Structural Steel", Engineering Fracture Mechanics,
Vol. 70,2003, pp.599-609.
85. K Angamuthu, B Guha and D R G Achar, " Investigation Of Dynamic Fracture
Toughness Behavior Of Strength Mis-Matched Q&T Steel Weldments Using
Instrumented Charpy Impact Testing", Engineering Fracture Mechanics, Vol. 64 ,
1999, pp.417-432.
86. A A Baron, 'The Relationship Between Fracture Toughness, Stretched Zone Width
And Mechanical Properties In Tensile Test", Engineering Fracture Mechanics,
Vol.49,1994, pp.445-450.
87. Leslie Banks Sills and Inna Dunye, "A Note on the Effect of Plastic Strain on
Fracture Toughness", Engineering Fracture Mechanics, Vol. 57,1997, pp.67-73.
88. B Dogan and K H Schwalbe, "Fracture Toughness Of TiAl Base Intermetallic
Alloys", Engineering Fracture Mechanics, Vol. 56 ,1997, pp. 155-165.
89. R Brown, "Fatigue of Ti-6A1-4V with A Widmanstatten Microstructure", Materials
Durability Division, University Of Delaware, Newark, USA.
90. Basant K Parida, C M Manjunath and H M Girish, " Fatigue Crack Closure
Evaluation Under Constant Amplitude And Spectrum Loading", Journal Of Testing
And Evaluation, Vol.31, No.4, 2003, pp.337-346.
91. Hong Chul Lee, Young Ha Hwang, Tae Gu Kim, " Failure Of Aircraft Propeller
Assembly", Engineering Failure Analysis, Vol.11,2004, pp.305-312.
205
92. Alejandro A Yawny and Juan E Perez Ipina, " In Situ Fracture Toughness
Measurement Using Scanning Electron Microscopy", Journal Of Testing And
Evaluation, Vol.31, No.5,2003, pp.413-422.
93. Klaus Wetzig, Siegfried Menzel and Thmos Gobel, "Fractography Of Crack
Networks In Thin Layers", Materials Characterization, Vol.46,2001, pp. 105-111.
94. R H Sailors and H T Corten, "Relationship Between Material Fracture Toughness
Using Fracture Mechanics And Transition Temperature Tests", ASTM STP 514,
1972, pp 164-191.
95. S T Rolfe and S R Novak, "Slow - bend Kjc testing of medium strength high
toughness steels," ASTM STP 463, pp 124-154,1970.
96. J A Begely and W A Logsdon, "Correlation of The Fracture Toughness And Charpy
properties For Rotor Steels", WRL Scientific Papers, Westinghouse Research
Laboratories, Pitsburgh, 1971.
97. R A WuUaert, "Fracture Toughness Predictions fi-om Charpy V Notch Data",
Proceedings of the American Institute of Mining, ASM, Denver, 1978.
98. Metal Finishing - 59* Guidebook and directory issue, Metals & Plastics
Publications, Inc, Hackensack, NJ.
99. Lucon E, "Fracture Toughness Using Small Cylindrical Specimens with Ring
Shaped Cracks", Proceedings of 8* Biennial European Conference on Fracture-
ECF8,1990, pp 1077-1082.
100. Esisele U, Roos E and Zinmiermann, "A Method For The Defined Fatigue Per
Crackin of Round Notched Bars", Journal of Testing And Evaluation, Vol 13, 1985,
pp 46-48.
101. Giovanola J H and Homma H, " Fracture Toughness Measurement Using Small
Cracked Round Bars", ASTM STP 1244, American Society For Testing And
Evaluation, 1994.
102. Lucon E and Bicego V, "Evaluating Service Exposed Component's Mechanical
Properties By Means of Sub sized And Miniature Specimens", ASTM STP 1204,
pp311-323, 1993.
103. Stark H L and Ibrahim, "Estimating Fracture Toughness from Small Specimens",
Engineering Fracture Mechanics, Vol 25, 1986, pp 395-401.
104. Anderson T L, "Fracmre Mechanics Fundamentals and Applications", CRC Press,
Second Edition, London, 1995.
206
105. John J Ruschau and Keith Donald, "Special Applications and Advanced Techniques
for Crack Size Determination", ASTM, STP 1251,1995.
106. Arun K V and C S Venkatesha, "Effect of Notch Configuration on The Mode-I
Fracture Behavior of Structural Materials in The Transition Temperature Region,"
Proceedings of the National Conference ECKAME-06, March 2006, Engineering
College, Kota, Rajastahn,.
107. Arun K V and C S Venkatesha, "Influence of Protective Coatings and the Service
Temperature on Mode - I Fracture Behaviour Of En8 Steel", Journal of Corrosion
Science and Engineering, Preprint published online. Vol. 7, Paper 31, Nov 2005.
108. Arun K V and C S Venkatesha, " Experimental And Fractographic Analysis On The
Fracture Toughness An d The Strain energy Release Rate In Nickel Coated EN 8
Steel," Fatigue & Fracture Of Engineering Materials & Structures," Under Review,
Paper ID: FFMS-3796.
109. Arun K V and C S Venkatesha, "Effect of Coating and Age Hardening on the
Fracture Behavior of Aluminum under Varied Temperature," Journal of Material
Science, Under Review, Paper ID: JMSC 3057.
110. Arun K V and C S Venkatesha, "Effect of Coating Thickness and Service
Temperature on Mode - 1 Fracture Behaviour of Low Carbon Steel," Proceedings of
the 14* ISME International Conference, Dec 2005, Delhi College of Engineering,
Delhi.
111. John M Goetz, " Ph.D Thesis on Investigation of Coating Cracking and Fatigue
Strength of 7050-T74 Aluminum Alloy with Different Anodize Coating Thickness",
College of Engineering, The Ohio State University, Columbus, OH, USA, 2005
112. Arun K V and C S Venkatesha, "Effect of Variable Thickness Copper Coating and
the Temperature on Fracture Toughness of Structural Materials", Proceedings of the
international conference ADEMSE-2005, U.V.C.E, Bangalore.
113. S G Roberts, "Modeling Brittle-Ductile Transitions", Proceedings of The
International Conference on Modelling and Materials Engineering, Ouranopolis,
Greece, 1999.
114. Dillon Dodd Fong, " Ph.D Thesis on Stresses in Cu Thin Fihns and Ag/Ni
Multilayers", Department of Applied Physics, Harvard University, Cambridge,
Massachusetts, September 2001
115. Frederick A Lx)wenheim, "Electroplating", Sponsored by American Electroplaters
Society, McGraw Hill Book Company, New York, 1980.
207
116. Arun KV and C S Venkatesha "Experimental Investigations On The Fracture
Toughness And Transition Temperature In Hard Chrome Coated Structural
Materials", International Journal of Materials Processing and Technology, Under
Review, Paper ED: FT09, March 2006.
117. Arun K V and C S Venkatesha, "Fracture On Toughness And Transition
Temperature In Hard Chrome Coated Structural Materials", Proceedings of The
Intemational Conference on Advances In Materials Processing and Characterization,
AMPC, August 2006, Anna University, Madras.
118. Arun K V and C S Venkatesha, "Mode-I Fracture Behavior of Coated And Heat
Treated Structural Materials Subjected To Impact Loads Under Varied Service
Temperature" Proceedings of The Intemational Conference on Structures Under
Shock And Impact Loading-SUSI, July 2006, The New Forest, UK.
119. K H Prabhudev, "Hand Book of Heat Treatment of Steels", TMH Publishing
Company, 1990.
120. Arun K V and C S Venkatesha, "Effect of Service Temperature and Heat Treatment
on Mode - I Fracture Behaviour of C15 Steel," Proceedings of the National
Conference YANTRA-2005, College Of Engineering, Pandharpur, Maharastra.
121. Arun K V and C S Venkatesha, "Effect Of Nickel Coating And Heat Treatment On
Fracture Toughness Of Low Carbon Steel," Journal Of Engineering Today, Vol.7,
Aug 2005.
122. P J Callus and C C Bemdt, "Relationships between The Mode-II Fracture Toughness
And Microstructure Of The Thermal Spray Coatings", Surface And Coatings
Technology, Vol 114 1999, pp 114-128.
123. Leon L Shaw, Ruiming Ren, and Daniel Goberman "Measurement Of Fracture
Energy Of The Coating/Substrate Interfacial Region Through Radial Notched
Cylindrical Specimens", Surface and Coatings Technology, Vol.130, 2000, pp. 74-
79.
124. Arun K V and C S Venkatesha, "Influence Of Service Temperature and Coating
Thickness on The Plane-Strain Fracture Behavior Of En8 Steel," Proceedings of the
Intemational Conference ICMPM-2005, Dec 2005, B.I.T, Sathyamangala.
125. Arun K V and C S Venkatesha, " Evaluation of Fracture Toughness By CVN Impact
Testing In The Transition Temperature Range", Proceedings of The Intemational
Conference On Damage And Fracture Mechanics, Crete, Greece, March 2004
208
126. Arun K V and C S Venkatesha, "Correlation between Plane Strain Fracture
Toughness and CVN Impact Energy," Proceedings of the National Conference,
NAME-2002, JNNCE, Shimoga.
127. Arun K V and C S Venkatesha, "Investigations On The Influence Of Nickel Coating
On Strain Energy Release Rate In En8 Steel," Journal Of Engineering Today, Vol.7,
Aug 2005.
128. V B Shenoy, and L B Freund, "Crack Patterns in Brittle Thin Films", International
Journal of Fracture, Vol 109,2001, pp29-45.
129. V B Watwood. "The Finite Element Method for Prediction of Crack Behavior".
Nuclear Engineering and Design, Vol.11,1969, pp. 323-332.
130. K Krishnaveni, T S N Shankara Narayanan and S K Seshadri, "Electroless Ni-B
Coatings: Preparation and Evaluation of Hardness and Wear Resistance", Surface
And Coatings Technology, Vol 190,2005, pp 115-121.
131. Arun K V and C S Venkatesha, "Fracture Behavior of Electroless Nickel Coated
Circumferentially Cracked Round Bars", Accepted For the International Symposium
on Metallurgy, Material Science and Engineering, ISRS-2006, Dec-2006, i n
Madras.
132. Karl Markstrom, "Experimental Determination of Jc Data Using Different Types of
Specimens", Engineering Fracture Mechanics, Vol 9,1977, pp 637-646.
133. Tie Jun Wang, "An Engineering Approach To Remove The Specimen Geometry
Constraint Dependence of Elastic Plastic Fracmre Toughness", Engineering Fracture
Mechanics, Vol 51,1995, pp 701-706.
134. J G Merkle and H T Corten, " A J Integral Analysis For The Compact Specimen,
Considering Axial Force As Well As Bending Effects", Journal Of Pressure Vessel
Technology, 1974.
135. Arun K V and C S Venkatesha, "Failure Mechanism in Electroless Nickel Coated
Structural Materials," Proceedings of the National Conference README-05, Dec-
2005, P.A College Of Engineering, Mangalore.
136. Suneel K Gupta, V Bhasin and K K Vaze, "A Study of J Integral Variation along the
Thickness of Pipe and Elbow for TWC Crack and Comparison with Simplified
Methods", Proceedings of 16* National Convention of Mechanical Engineers,
U.O.R, Sept 2000.
137. Arun K V and C S Venkatesha, "Strain Energy Release Rate And Tearing Modulus
In Double Edge Notched Round Bars (DENB's), Accepted to the International
209
Conference On Advances In Mechanical Engineering, AME-2006, 1"' to 3"* Dec
2006, BBSBEC, Punjab.
138. Yakushiji, "Factors Affecting Non Propagation of Fatigue Crack in Low Carbon
Steel", JSME International Journal, Vol 44,2001, pp 138-143.
139. D Broek, "Some Contributions of Electron Fractography to the Theory of Fracture",
National Aerospace Laboratory and NLR.
140. Standard Test Method for Plane - Strain Fracture Toughness of Metallic Materials
[E 399], Annual Book of ASTM Standards.
141. Standard Practice For Qualifying Charpy Verification Specimens Of Heat Treated
Steel [E 1271], Annual Book of ASTM Standards.
142. Standard Practice for Qualifying Charpy Impact Machines as Reference Machines
[E1236], Annual Book of ASTM Standards.
143. Standard Test Methods For Notched Bar Impact Testing of Metallic Materials [E
23], Annual Book of ASTM Standards.
144. Standard Test Method for Tensile Testing [E 8], Annual Book of ASTM Standards.
145. ASM Metals Handbook, "Fractography and Atlas of Fractographs "Vol 9.
146. Zhuravlev, "Adherence of Coatings to metals". Proceedings of the Fifth AU-Union
Conference on Heat Resistant Coatings, Khar'kov, May 1970, pp 385-393.
147. Heat Treating Data Book, Seco / Warwic Corporation, Meadville, Eighth Edition,
2000.
148. Moriyama, "Effect of Shot Peening on Fatigue Strength of 18% Maraging Steel",
JSME International Journal, Vol 44,2001, pp 301-308.