PowerPoint PresentationMichael Adamo, P.E.
Contributing expertise/experience relevant to rehabilitation of
cast iron, wrought iron or bare steel pipelines:
• Stand alone NFP made up of 27 natural gas utility companies
• Mission: Identify, select, fund, and oversee research
• Fund over $11M in research annually • OTD will be managing the
TSSC for the program
Soliciting expertise/experience in the following area(s) for
partnering:
• OTD is an organization that funds research.
• If you have compelling ideas related to the REPAIR program, we
may consider providing co-funding
Task: XX
Please, select Task 1,2,3,4,5,6 (1) Testing & Analysis, (2)
Smart coating materials, (3) Coating-deposition tool, (4) Pipe
Integrity/Inspection Tool, (5) Integrated pipe tests, and (6)
Pipeline mapping and data integration.
Task(s) of Interest:
• All of them…
Brad P. Wham, Ph.D.
Testing University of Colorado Boulder
(609) 731-2220
[email protected]
gas, water, and wastewater industries • Longevity testing of liner
systems (50-year life) • Seismic testing of liners for
EQ-retrofit
• Seismic evaluation of lifeline systems to ground deformation:
physical testing & numerical modeling
• CIEST: large-scale testing facility equip with • material
testing, structural dynamics, and centrifuge
capabilities
• Numerical modeling expertise to complement physical testing
design and interpretation
Task: 1
• 1.1: Failure modes and performance criteria
• 1.2: Modeling failure modes and developing test methods
• 1.3: Testing and correlations
Allan Manalo, Ph.D.
(+61) 7 4631-2547
[email protected]
• Analytical modelling of composite pipe-in-steel pipe • Testing
and analysis of repaired steel pipes • Durability
investigation/modelling of coating materials
Soliciting expertise/experience in the following area(s) for
partnering:
• Pipe-in-pipe testing • Development of test methods
Task: 1
Please, select Task XX. XX = 1, 2,3,4 or 5, being: (1) Testing
& Analysis, (2) Smart coating materials, (3) Coating-deposition
tool, (4) Pipe Integrity/Inspection Tool, (5) Integrated pipe
tests, and (6) Pipeline mapping and data integration.
Task(s) of Interest:
• Characterizing and correlating failure modes for composite
pipe-in-pipe configurations.
• Modelling the behavior for composite pipe-in-pipe under various
loading scenarios.
• Establishing critical properties and optimizing structural
coating materials.
REPAIR Industry Day Rapid Encapsulation of Pipelines Avoiding
Intensive Replacement
Jeff Maier, PE
• Trenchless pipeline rehabilitation technology expertise •
Advanced pipeline condition assessment technology
expertise • Federal contracts experience • Industry standards
development (ASTM and ISO) • Prominent trenchless industry
leadership roles • NACE CIP Level 3 coating/lining inspection
certification • Dedicated team of research-focused engineers •
Experience as a contractor, municipal engineer &
consultant with over 20 years in the pipeline industry
Soliciting expertise/experience in the following area(s) for
partnering:
• Advanced coating/lining materials • Robotics technology providers
• Pipe integrity and inspection
technologies • Coating/ lining installation systems • Academic
partners • Gas industry experts
Task: 1
REPAIR project
Jason Stieg
[email protected]
Contributing expertise/experience relevant to rehabilitation of
cast iron, wrought iron or bare steel pipelines:
• Inventor/developer of a new class of polymer, Poly-catechol
styrene (PCS) which was derived from studying the adherence
properties of mussels
Soliciting expertise/experience in the following area(s) for
partnering:
• Task 2 Smart coating materials, we believe that our PCS could be
one component of the overall final smart coating material. We are
interested in partnering with other material teams to develop an
integrated material solution.
• Task 3 Coating Deposition tool, we feel it is important to
coordinate/jointly develop Task 2 and Task 3
Task: 2
Please, select Task XX. XX = 1, 2,3,4 or 5, being: (1) Testing
& Analysis, (2) Smart coating materials, (3) Coating-deposition
tool, (4) Pipe Integrity/Inspection Tool, (5) Integrated pipe
tests, and (6) Pipeline mapping and data integration.
Task(s) of Interest:
• Task 2
• PCS has proven in the lab to outperform all commercially
available adhesives in wet environments
• PCS has shown strong adhesion for many classes of materials,
including low energy surfaces such as polymers (and even
Teflon)
• PCS could also be applied as a pre- treatment or blended into
other coating components systems
Innovative Pipeline Repair using Tailorable Universal Feedstock for
Forming (TuFF) Materials Novel short fiber reinforced composite
(FRP) feedstock revolutionizes the use of composites • World’s
Strongest Short Fiber (FRP) developed under
a $15M DARPA program • ~60% Fiber Volume Fraction • Strength 230ksi
(E-Glass) to 370ksi (CF)
• Low Pressure Radial Forming • TuFF material allows structural
replacement
at minimum gauge • Fiber including hybrids and resins can be
tailored to lifecycle requirements and cost
Radial Formability Allows Rapid Encapsulation with FRP (40%
Expansion enables complex features)
Looking for commercial partners to evaluate technologies • Task 2
Smart Coating Materials
• Existing material replacement with TUFF for improved
manufacturability and structural performance
• Integrated Health Monitoring • Assist with Coating Deposition and
Inspection
Dirk Heider, Ph.D. University of Delaware – Center for Composite
Materials
[email protected], 302-831-8898
Integrate TuFF and TDR/CNT Health Monitoring Approaches with
Existing Repair Technologies
Pipe Wall
Expansion via Internal pressure Short fibers slide microstructure
preserved
Integrated Health Monitoring of Composite Pipe •Structural health
technologies with Time Domain Reflectometry (TDR) or embedded
Carbon Nanotube (CNT) networks in FRP
• TDR measurement along long distances in composite materials •
Measures process conditions during pipe repair • Locate in-service
faults and defects
• Patented CNT approach allows local strain and defect measurements
in critical pipe zones
Ste p Generator
Sensor Line Z 0 , ε eff ≈ 2.1 Discontinuity
Z d , ε eff ≈ 3.3
Epoxy resin High Speed Oscilloscope
Air
Dennis Jarnecke
(847) 768-0943
[email protected]
Contributing expertise/experience relevant to rehabilitation of
cast iron, wrought iron or bare steel pipelines: • GTI has over 75
years of experience working with the natural
gas industry developing and evaluating pipe repair and
rehabilitation technologies.
• Developed and facilitated the implementation of composite
materials, liners and other technologies for pipe replacement and
repair of aging infrastructure.
• Developed and tested cured in place liners (Starline) • Evaluated
various structural liners and composite piping
systems for rehabilitation applications • Data collection, GIS
& internal pipe 3D mapping capabilities. • Established gas
industry practices, codes, & standards. • Close relationship
with natural gas pipeline operators.
Soliciting expertise/experience in the following area(s) for
partnering: • Various consulting and other
technology needs related to modeling and various test methods
Task: 1 and 6
Please, select Task 1 and 6. (1) Testing & Analysis, (2) Smart
coating materials, (3) Coating-deposition tool, (4) Pipe
Integrity/Inspection Tool, (5) Integrated pipe tests, and (6)
Pipeline mapping and data integration.
Task(s) of Interest: • Testing / Analysis / Protocols /
Hardware • Physical REPAIR Pipe Testing • 3D Mapping & Data
Integration and
Gerald O. Wilson, Ph.D.
(217) 863-2023
[email protected]
• Designing, scaling up and manufacturing smart coating additives
aimed at adding self-reporting capabilities to coating and
composite matrices (tunability of capsule properties)
• Additives that add self-healing functionality to coating and
composite matrices
• Microencapsulation of healing agents, reporting agents and
anti-fouling agents
Soliciting expertise/experience in the following area(s) for
partnering:
• Pipe coating/composite deposition tools
• Pipe integrity/inspection tool • Integrated pipe testing •
Pipeline mapping and data
integration, interface design
Task: 2
Please, select Task XX. XX = 1, 2,3,4 or 5, being: (1) Testing
& Analysis, (2) Smart coating materials, (3) Coating-deposition
tool, (4) Pipe Integrity/Inspection Tool, (5) Integrated pipe
tests, and (6) Pipeline mapping and data integration.
Task(s) of Interest:
• Incorporation into matrix of targeted mechanical properties
• Localized damage reporting and active damage indication
REPAIR Industry Day Rapid Encapsulation of Pipelines Avoiding
Intensive Replacement
Nils Napp / Kirstin Petersen Department of Electrical and
Computer Engineering Cornell University, Ithaca, NY
[email protected] [email protected]
• Multi-robot coordination and construction • Soft and compliant
robots • Smart materials • Algorithms for complex polymer
deposition planning • Reliable interaction with unstructured
environments • System and mechanism design for multi-robot teams •
Reliable long-term autonomy • Mapping, sensor fusion, and data
analysis
Soliciting expertise/experience in the following area(s) for
partnering:
• Coating Materials • NDT sensors • Tethers • Safety around
pipelines
Please, select Task XX. XX = 1, 2,3,4 or 5, being: (1) Testing
& Analysis, (2) Smart coating materials, (3) Coating-deposition
tool, (4) Pipe Integrity/Inspection Tool, (5) Integrated pipe
tests, and (6) Pipeline mapping and data integration.
Task(s) of Interest: