M e c h a n i c a l E n g i n e e r i n g 1 W I L E Y
Mechanical Engineering Rights Guide: Autumn/Winter 2013
Aeronautic & Aerospace Engineering ............................... 4
Civil Avionics Systems, 2e/Moir ......................................................................................................... 4
Aircraft Flight Dynamics and Control/Durham .................................................................................. 4
Aerospace Propulsion/Lee ................................................................................................................. 5
Modeling of Complex Systems: Application to Aeronautical Dynamics/Grunn ............................. 5
Advanced Aircraft Design: Conceptual Design, Technology and Optimization of Subsonic Civil Airplanes/Torenbeek ........................................................................................................................... 6
Modelling and Managing Airport Performance/Zografos ................................................................. 6
Automotive Engineering ..................................................... 7
Introduction to Sustainable Transports/Favre .................................................................................. 7
Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness/Elmarakbi ................................................................................................................ 7
Guide to Load Analysis for Durability in Vehicle Engineering/Johannesson ................................. 8
Driving Simulation /Arioui ................................................................................................................... 8
Computational / Numerical Methods ................................. 9
System Simulation Techniques with MATLAB® and Simulink® /Xue ............................................ 9
Nonlinear Finite Elements for Continua and Structures, 2e/Belytschko ......................................... 9
Manufacturing Processes: Modeling and Numerical Simulation/Bergheau ................................. 10
Engineering Informatics: Fundamentals of Computer-Aided Engineering/Raphael ................... 10
Numerical Analysis with Applications in Mechanics and Engineering/Teodorescu .................... 11
Fluid Mechanics ................................................................. 11
Physics and Geochemistry of Water/Lécuyer ................................................................................. 11
Turbulent Multiphase Flows with Heat and Mass Transfer/Anselmet ........................................... 12
Nanoimprint Technology: Nanotransfer for Thermoplastic and Photocurable Polymers/Taniguchi ........................................................................................................................... 12
Nonlinear Physical Systems: Spectral Analysis, Stability and Bifurcations/Kirillov .................... 13
Industrial Engineering ....................................................... 13
Micro-Cutting: Fundamentals and Applications/Cheng ................................................................. 13
Zonotopes: From Guaranteed State-estimation to Control/Stoica ................................................ 14
Metaheuristic Optimization for the Design of Automatic Control Laws/Sandou ......................... 14
Risk Analysis: Socio-technical and Industrial Systems/Flaus ...................................................... 15
Model Based Systems Engineering: Fundamentals and Methods/Micouin .................................. 15
Quality Function Deployment for Sustainable Development/Raharjo .......................................... 16
Energy Efficient Manufacturing with Applications/Sutherland ...................................................... 16
M e c h a n i c a l E n g i n e e r i n g 2 W I L E Y
Mechanical Engineering.................................................... 17
Structural Dynamic Analysis with Generalized Damping Models/Adhikari ................................... 17
Programming the Finite Element Method, 5e/Smith ....................................................................... 17
Nonlinear Beam and Cable Mechanics: Mathematical Modeling and Engineering Applications/Luongo ......................................................................................................................... 18
Non-local Structural Mechanics/Murmu .......................................................................................... 18
Control of Cutting Vibration and Machining Instability: A Time-Frequency Approach for Precision, Micro and Nano Machining/Suh ..................................................................................... 19
Optimal Modified Continuous Galerkin CFD/Baker ........................................................................ 19
Active and Passive Vibration Damping/Baz .................................................................................... 20
Stochastic Structural Dynamics: Application of Finite Element Methods/To .............................. 20
Method of Moments for the Scattering from 2D Problems: Basic Concepts and Applications/Bourlier ......................................................................................................................... 21
Modeling and Optimization of Air Traffic/Delahaye ........................................................................ 21
Proportionate-type Normalized Least Mean Square Algorithms/Wagner ..................................... 22
Spatial and Spatio-temporal Data Analysis/Dubé ........................................................................... 22
Co-Clustering/Govaert ...................................................................................................................... 23
Algorithms and Ordering Heuristics for Distributed Constraint Satisfaction Problems/Wahbi . 23
Bistatic SAR / ISAR / FSR: Theory Algorithms and Program Implementation/Lazarov ............... 24
Applied Reliability Engineering and Risk Analysis: Probabilistic Models and Statistical Inference/Frenkel ............................................................................................................................... 24
Solid Mechanics ................................................................. 25
Dimensional Analysis and Similarity Theory in Applied Mechanics and Heat Transfer/Milisavlevich ........................................................................................................................ 25
Polymer Matrix Syntactic Foams: Microstructure, Properties, and Applications/Gupta .......... 25
Advanced Structural Damage Detection: From Theory to Engineering Applications/Stepinski . 26
Practical Multiscaling/Fish................................................................................................................ 26
Thermodynamics ............................................................... 27
Fundamentals of the Finite Element Method for Heat and Flow, 2e/Nithiarasu ............................ 27
Spring/Summer 2013 ......................................................... 27
Aeronautic & Aerospace ................................................... 27
Aircraft Systems Integration of Air-Launched Weapons/Rigby ..................................................... 27
Design and Analysis of Composite Structures: With Applications to Aerospace Structures, 2e/Kassapoglou .................................................................................................................................. 28
Advanced Aircraft Design: Conceptual Design, Technology and Optimization of Subsonic Civil Airplanes/Torenbeek ......................................................................................................................... 28
Theoretical Aerodynamics/Rathakrishnan ....................................................................................... 29
Automotive ......................................................................... 29
Battery Systems Engineering/Rahn ................................................................................................. 29
M e c h a n i c a l E n g i n e e r i n g 3 W I L E Y
Engineering Management ................................................. 30
Tools for Collaborative Decision-Making/Zaraté ............................................................................ 30
Computational / Numerical Methods ............................... 30
Multiscale Simulations and Mechanics of Biological Materials /Li ............................................... 30
Computational Fluid-Structure Interaction: Methods and Applications/Bazilevs ........................ 31
Non Smooth Deterministic or Stochastic Discrete Dynamical Systems: Applications to Models with Friction or Impact/Bastien ......................................................................................................... 31
Computer Science ............................................................. 32
Memory Allocation Problems in Embedded Systems: Optimization Methods/Soto .................... 32
Computer Science and Ambient Intelligence/Calvary .................................................................... 32
Fluid Mechanics ................................................................. 33
The Stochastic Perturbation Method for Computational Mechanics/Kaminski ............................ 33
Analysis and Modelling of Non-Steady Flow in Pipe and Channel Networks/Jovic .................... 33
Mechanical & Industrial Engineering ............................... 34
The PDMA Handbook of New Product Development/Kahn ............................................................ 34
Making Effective Business Decisions Using Microsoft Project/Advisicon .................................... 34
Project Management: A Systems Approach to Planning, Scheduling, and Controlling, 11e/Kerzner ........................................................................................................................................ 35
Project Management: Case Studies/Kerzner ................................................................................... 35
A User's Manual to the PMBOK Guide/Snyder ................................................................................ 36
A Project Manager's Book of Forms: A Companion to the PMBOK Guide/Snyder ...................... 36
Intelligent Non-hierarchical Manufacturing Networks/Poler .......................................................... 37
Handbook of Compliant Mechanisms/Howell ................................................................................. 37
Nano and Cell Mechanics: Fundamentals and Frontiers/Espinosa ............................................... 38
Geometry of Surfaces: A Practical Guide for Mechanical Engineers/Radzevich ......................... 38
Numerical Calculation of Lubrication: Methods and Programs/Huang ........................................ 39
Handbook of Compliant Mechanisms/Howell ................................................................................. 39
Vibro-impact Dynamics/Luo ............................................................................................................. 40
Reconstructing Project Management/Morris ................................................................................... 40
Tribology ............................................................................ 41
Grease Lubrication in Rolling Bearings/Lugt .................................................................................. 41
Introduction to Tribology, 2e/Bhushan ............................................................................................ 41
Principles and Applications to Tribology, 2e/Bhushan .................................................................. 42
Structural Health Monitoring ............................................ 42
Vibro-impact Dynamics/Luo ............................................................................................................. 42
Advanced Structural Damage Detection: From Theory to Engineering Applications/Stepinski . 43
M e c h a n i c a l E n g i n e e r i n g 4 W I L E Y
Aeronautic & Aerospace Engineering
Civil Avionics Systems, 2e
Ian Moir, Allan Seabridge, Malcolm Jukes
978-1-118-34180-3 / 1-118-34180-5
624 pp. Pub: 13/09/13
Aeronautic & Aerospace Engineering
Civil Avionics Systems, Second Edition, is an updated in-depth study and explanation of avionics as applied to civil aircraft. Avionics covers analogue and digital electronics, sensors, signaling, and computers that transmit to and control the operations of the aircraft. It also includes the technology, systems development, electrical systems, sensors, communication, navigation, flight control, displays, engine and utilities control, and is also the integration of all these elements.
• Features updated contents in the light of latest applications.
• Provides a uniquely comprehensive source of information.
• Illustrated throughout with line drawings and photographs, with some images of flight decks and displays in full colour.
• Includes a chapter on displays written by Malcolm Jukes, an internationally respected expert, updated to include the recent evolution of Flight Deck technology, displays and architectures.
• Substantial new content has been included in the areas of Avionics Technology, Software and System Safety.
Aerospace engineers and graduate and postgraduate students in aerospace engineering. Engineers in the airline industry, designers, manufacturers, operators, maintenance engineers, electronic component suppliers, engine manufacturers, air traffic controllers, navigation engineers, aircraft inspectors, accident investigators.
Ian Moir, Moir Associates, UK, is in demand as a highly respected consultant. From the RAF Tornado and Apache helicopter to the Boeing 777, Ian's work has kept him at the forefront of new system developments and integrated systems in the areas of more-electric technology and systems implementations. He has a special interest in fostering training and education in aerospace engineering. Allan Seabridge, Seabridge Systems Ltd, UK has 36 years’ experience in aerospace systems engineering, business development and research & development. Since retiring he has developed an interest in engineering education leading to the design and delivery of systems and engineering courses at a number of UK universities at undergraduate and postgraduate level.
Aircraft Flight Dynamics and Control
Wayne Durham
978-1-118-64681-6 / 1-118-64681-9
320 pp. Pub: 20/09/13
Aeronautic & Aerospace Engineering
This book addresses airplane flight dynamics and control in a largely classical manner, but with references to modern treatment throughout. Classical feedback control methods are illustrated with relevant examples, and current trends in control are presented by introductions to dynamic inversion and control allocation.
It covers the physical and mathematical fundamentals of aircraft flight dynamics as well as more advanced theory enabling a better insight into nonlinear dynamics. This leads to a useful introduction to automatic flight control and stability augmentation systems with discussion of the theory behind their design, and the limitations of the systems. The author provides a rigorous development of theory and derivations and illustrates the equations of motion in both scalar and matrix notation.
• Classical development and modern treatment of flight dynamics and control
• Detailed and rigorous exposition and examples, with illustrations
• Presentation of important trends in modern flight control systems
• Accessible introduction to control allocation based on the author's seminal work in the field
• Development of sensitivity analysis to determine the influential states in an airplane's response modes
• End of chapter problems with solutions available on an accompanying website
Written by an author with experience as an engineering test pilot as well as a university professor, Aircraft Flight Dynamics and Control provides the reader with a systematic development of the insights and tools necessary for further work in related fields of flight dynamics and control. It is an ideal course textbook and is also a valuable reference for many of the necessary basic formulations of the math and science underlying flight dynamics and control.
Wayne Durham is an Associate Professor Emeritus in the College of Engineering at Virginia Polytechnic Institute and State University. His area of research focuses on aircraft flight dynamics and control and he teaches a course (AOE 5214) on this subject at Virginia Tech University. He previously worked as a flight instructor at various Navy Schools in the US.
M e c h a n i c a l E n g i n e e r i n g 5 W I L E Y
Aerospace Propulsion
T.-W. Lee
978-1-118-30798-4 / 1-118-30798-4
312 pp. Pub: 13/12/13
Aeronautic & Aerospace Engineering
Aerospace propulsion devices embody some of the most advanced technologies, ranging from materials, fluid control, and heat transfer and combustion. In order to maximize the performance, sophisticated testing and computer simulation tools are developed and used.
Aerospace Propulsion comprehensively covers the mechanics and thermal-fluid aspects of aerospace propulsion, starting from the fundamental principles, and covering applications to gas-turbine and space propulsion (rocket) systems. It presents modern analytical methods using MATLAB and other advanced software and includes essential elements of both gas-turbine and rocket propulsion systems. Gas turbine coverage includes thermodynamic analysis, turbine components, diffusers, compressors, turbines, nozzles, compressor-turbine matching, combustors and afterburners. Rocket coverage includes chemical rockets, electrical rockets, nuclear and solar sail.
• Both gas-turbine and rocket propulsion covered in a single volume
• Presents modern analytical methods and examples
• Combines fundamentals and applications, including space applications
• Accompanied by a website containing MATLAB examples, problem sets and solutions
Aerospace Propulsion is a comprehensive textbook for senior undergraduate graduate and aerospace propulsion courses, and is also an excellent reference for researchers and practicing engineers working in this area.
Instructors and students in senior-level undergraduate and graduate courses in aerospace propulsion. Researchers and practicing engineers in aerospace propulsion.
T.W. Lee is currently an Associate Professor in the Mechanical and Aerospace Engineering department at Arizona State University. He has been teaching an Aerospace Propulsion class for the last 15 years and is the author of two books. His research interests include combustion, thermal-fluids, and propulsion systems and current projects include hypersonic inlets and supersonic reactors.
Modeling of Complex Systems: Application to Aeronautical Dynamics
Emanuel Grunn, Tuan Anh Pham
978-1-84821-448-4 / 1-84821-448-0
320 pp. Pub: 04/12/13
Aeronautic & Aerospace Engineering
This book provides a description of the modeling, design, and calculation of the aeronautical qualities of airplanes and drones. Divided into several parts, this book first summarizes all the necessary theoretical developments about the equations of motions and trajectory calculations of the machine. It then goes on to describe practical building processes and considers piloting methods. The last part makes a comparison between theoretical calculations and measured recorded data of the real flying machine.
• Description of a method about modeling, design and calculation of flying qualities of airplanes and Drones, with topics about simulation methods by MATLAB/SIMULINK, calculation or measurement of particular characteristics of the machines like inertial datas and aerodynamic coefficients and derivatives.
• The book will summarize in the first part all necessary theoretical development about the equations of motions and trajectory calculation of the machine.
• The second chapter describes practical building processes and considered piloting methods.
• The last part will make a comparison between theoretical calculations and measured recorded datas on the real flying machine.
Engineers and researchers working within the aerospace industry, Graduate and postgraduate students in mechanical engineering.
Mr Anh-Tuan Pham graduated from the Institute of Space and Aeronautics (ISAE/Toulouse). Former research and development engineer in sectors like Aerospace (ONERA) and Automotive (Peugeot) during the period 1962-2002.Now retired and Professor of Aircraft and Automotive at ESTACA (Paris). Mr Emmanuel Grunn is a former specialist engineer of mechanical design inside RENAULT affiliates. Now Professor of Automatics Systems at ESTACA (Paris).
M e c h a n i c a l E n g i n e e r i n g 6 W I L E Y
Advanced Aircraft Design: Conceptual Design, Technology and Optimization of Subsonic Civil Airplanes
Egbert Torenbeek
978-1-118-56811-8 / 1-118-56811-7
440 pp. Pub: 21/06/13
Aeronautic & Aerospace Engineering
Safety, efficiency and environmental friendliness have improved in jetliners considerably since the 1950’s. Main contributors to this have been gas turbine engine technology, materials, computational aerodynamics, advanced structural analysis and on-board systems. Since aircraft design became a highly multidisciplinary activity, the development of multidisciplinary optimization (MDO) has become a popular new discipline. Despite this, the application of MDO during the conceptual design phase is not yet widespread.
This book presents a quasi-analytical optimization approach based on a concise set of sizing equations. Objectives are aerodynamic efficiency, mission fuel, empty weight and maximum takeoff weight. Independent design variables studied include design cruise altitude, wing area and span and thrust or power loading. Principal features of integrated concepts such as the blended wing and body and highly non-planar wings are also covered. This approach enables designers to compare the results of high-fidelity MDO optimization with lower-fidelity methods which need far less computational effort. Another advantage to this approach is that it can provide answers to "what if" questions rapidly and with little computational cost.
• Presents a new fundamental vision on conceptual airplane design optimization
• Provides an overview of advanced technologies for propulsion and reducing aerodynamic drag
• Offers insight into the derivation of design sensitivity information
Researchers and practitioners in aerospace industry (aircraft designers, aircraft weight engineers and applied scientists). Graduate students in aerospace engineering.
Egbert Torenbeek is Professor Emeritus of Aircraft Design at Delft University of Technology.
Modelling and Managing Airport Performance
Konstantinos Zografos, Giovanni Andreatta, Amedeo Odoni
978-0-470-97418-6 / 0-470-97418-4
312 pp. Pub: 26/07/13
Aeronautic & Aerospace Engineering
Modelling and Managing Airport Performance comprises a broad span of research across a wide spectrum of analytical models and simulation tools for airport performance, as well as methodologies, concepts, and strategies that aim to bridge the gap between demand and capacity. The authors offer a global perspective on both landside / terminal and airside elements in an integrated way, considering diverse measures of airport performance and discussing both existing airport modelling capabilities and future modelling needs with advanced concepts and strategies that deal with the management of airport performance through the allocation of airport capacity.
Themed around 3 sections: Modelling Airport Performance, Assessing Airport Impacts, and Managing Airport Performance & Congestion, Modelling and Managing Airport Performance provides an invaluable reference for researchers and practitioners in the global air transportation community.
• Offers a contribution to the definition and common interpretation of airport performance measures or notions
• Considers diverse measures of airport performance including capacity, delays, level of service, safety and noise
• Addresses an area of intense research interest to both practitioners and academics
• Provides a global perspective from contributing authors and research efforts worldwide
Researchers and graduate level students in the air transportation academic community. Professionals and practitioners in the air transportation industry.
Konstantinos G. Zografos, Professor & Chair, Dept. of Management Science & Technology and Director, Transportation Systems & Logistics Laboratory, Athens University of Economics and Business. He consults with industry, has won many awards for his activities within operations research and is a member of the editoral board for several peer review journals. Giovanni Andreatta is Professor of Operations Research in the Department of Pure and Applied Mathematics at the University of Padova. Amedeo R. Odoni is Professor of Aeronautics and Astronautics and of Civil and Environmental Engineering.
M e c h a n i c a l E n g i n e e r i n g 7 W I L E Y
Automotive Engineering
Introduction to Sustainable Transports
Bernard Favre
978-1-84821-545-0 / 1-84821-545-2
320 pp. Pub: 03/02/14
Automotive Engineering
Transport systems have to meet the mobility needs of people and commodities on all scales, from the local to the global level. Concern about the energy, fumes and sound emissions produced, and about the safety, service quality, intelligence, and lifecycle of the systems can all be included in a systemic approach. This approach contributes to the development of sustainable solutions, for vehicles as well as for transport systems. Derived from an approach combining social and physical sciences, these solutions result from the integration of physical objects, services and organization processes, which involve several actors. Their harmonious organization contributes to the development of more virtuous transport systems for the future of urban and interurban mobility.
This title takes a systematic approach to examining how matters of energy, gas, and sound emissions, safety, service quality, intelligence, and lifecycle can exist harmoniously with society’s local and global transport needs. Addressing a central topic in sustainable development, the book suggests ecological solutions for vehicle and transport improvements that integrate physical objects, services, and organization processes. Such collaboration fosters an enhanced transport system that looks to the future of urban and interurban mobility.
Bernard Favre, Research & Public Funding, Volvo Technology, Lyon, France
Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness
Ahmed Elmarakbi
978-1-118-42386-8 / 1-118-42386-0
472 pp. Pub: 23/12/13
Automotive Engineering
Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness provides a comprehensive explanation of how advanced composite materials, including FRPs, reinforced thermoplastics, carbon-based composites and many others are designed, manufactured and utilized in vehicle structural components where structural integrity and crashworthiness are key. This book includes technical explanation of composite materials in vehicle design and analysis and covers all phases of composites design, modelling, testing and failure analysis. It also explores the performance of existing materials including carbon composites and future developments in automotive material technology which work towards reducing the weight of the vehicle structure.
• Comprehensively covers how advanced composite materials are designed, manufactured and utilized in vehicles.
• Examines failure analysis of composite materials and their implications in automotive applications.
• Explores technical advantages of current and future uses of composites.
• Includes case studies and examples covering all aspects of composite materials and their applications in the automotive industry.
Engineers and researchers working with composites in the automotive industry. Graduate and postgraduate students in mechanical and materials engineering.
Dr. Ahmed Elmarakbi obtained his PhD in Mechanical Engineering from University of Toronto, Canada in 2004. Then, he began a prestigious postdoctoral research fellowship supported by NSERC/JSPS in the Department of Aeronautics and Space Engineering at the Tohoku University, Japan. From 2007, he joined the Department of Computing, Engineering and Technology at the University of Sunderland as a Senior Lecturer. He was promoted to Reader in January 2011. His research interests lie in the area of energy efficient vehicles including; lightweight materials for low carbon vehicle, advanced composite materials, vehicle safety and crashworthiness, and vehicle dynamics and control.
M e c h a n i c a l E n g i n e e r i n g 8 W I L E Y
Guide to Load Analysis for Durability in Vehicle Engineering
Par Johannesson, Michael Speckert
978-1-118-64831-5 / 1-118-64831-5
464 pp. Pub: 01/11/13
Automotive Engineering
Everything for the automotive loads engineer in one book! The overall goal of vehicle design is to make a robust and reliable product that meets the demands of the customers and this book treats the topic of analysing and describing customer loads with respect to durability.
PassiveEngineering supplies a variety of methods for load analysis and also explains their proper use in view of the vehicle design process. In Part I, Overview, there are two chapters presenting the scope of the book as well as providing an introduction to the subject. Part II, Methods for Load Analysis, describes useful methods and indicates how and when they should be used. Part III, Load Analysis in view of the Vehicle Design Process, offers strategies for the evaluation of customer loads, in particular characterization of customer populations, which leads to the derivation of design loads, and finally to the verification of systems and components.
• Comprehensive coverage of vehicle load analysis for durability
• Emphasis on probabilistic and statistical description and analysis of loads
• Covers the use of established computational methods, such as finite element method (FEM) and multi body simulation (MBS), and their appropriate use within load analysis for durability
• Presents a reliability assessment method, which is tailored to the specific difficulties and requirements within durability applications
• Combination of fatigue of structures and stochastic and probabilistic analysis allows a comprehensive view of load analysis and focus on the importance of the variability of the load in-service
Engineers. Graduate and postgraduate students.
Par Johannesson is currently working as a research engineer at SP Technical Research Institute of Sweden, mainly within industrial and research projects on statistical methods for load analysis, reliability and fatigue. Michael Speckert works at the department for Dynamics and Durability at Fraunhofer ITWM as an applied researcher.
Driving Simulation
Hichem Arioui, Lamri Nehaoua
978-1-84821-467-5 / 1-84821-467-7
160 pp. Pub: 04/10/13
Motors & Drivers
Drivers of motorized two-wheeled vehicles are considered as the most vulnerable road users. Indeed, the number of motorbike accidents has been constantly increasing over the last few years. In addition, according to the most recent statistics, despite the preventive and repressive measures recently implemented, the number of casualties among motorcyclists has not decreased, even while there has been a marked progress among car drivers. This book discusses the topic of driving simulation for motorbike drivers, providing techniques and approaches that will help users drive safely and avoid accidents and collisions.
Passive and active safety systems (ABS, ESP, safety belts, airbags) represent a major advance in terms of safety in motoring. They are being increasingly developed and installed in cars and are beginning to be installed in two-wheeled vehicles. The authors present a state of the art on safety systems and assistance to driving and their two-wheeled counterparts. The aim is to point out the differences of perspectives between motor vehicles and motorcycles to identifty relevant indicators to help in choosing the mechanical architecture of the motorcycle simulator and appropriate controls.
Scientists, researchers and industrial engineers interested in this subject area
Hichem Arioui is lecturare at the University of Evry Val d'Essone, Evry, France. Lamri Nehaoua is a Postdoctoral Research fellow at the Laboratory IBIS of the University Evry Val d'Essone, Evry, France
M e c h a n i c a l E n g i n e e r i n g 9 W I L E Y
Computational / Numerical Methods
System Simulation Techniques with MATLAB® and Simulink®
Dingyu Xue, YangQuan Chen
978-1-118-64792-9 / 1-118-64792-0
480 pp. Pub: 01/11/13
Computational / Numerical Methods
System Simulation Techniques with MATLAB and Simulink comprehensively explains how to use MATLAB and Simulink to perform dynamic systems simulation tasks for engineering and non-engineering applications.
It begins with covering the fundamentals of MATLAB programming and applications, and the solutions to different mathematical problems in simulation. The fundamentals of Simulink modelling and simulation are then presented, followed by coverage of intermediate level modelling skills and more advanced techniques in Simulink modelling and applications. Finally the modelling and simulation of engineering and non-engineering systems are presented. The areas covered include electrical, electronic systems, mechanical systems, pharmacokinetic systems, video and image processing systems and discrete event systems. Hardware-in-the-loop simulation and real-time application are also discussed.
• Progressive building of simulation skills using Simulink, from basics through to advanced levels, with illustrations and examples
• Wide coverage of simulation topics of applications from engineering to non-engineering systems
• Dedicated chapter on hardware-in-the-loop simulation and real time control
• End of chapter exercises and a companion website hosting a solution manual and powerpoint slides
Graduate/senior undergrad students across mechanical, aerospace, automotive, control and electrical engineering. Researchers and practitioners in engineering industries.
Dingyu Xue, Professor of Control Engineering, School of Information Science & Engineering, Northeastern University. YangQuan Chen is an Assistant Professor in the School of Engineering at the University of California.
Nonlinear Finite Elements for Continua and Structures, 2e
Ted Belytschko, Wing Kam Liu, Brian Moran, Khalil Elkhodary
978-1-118-63270-3 / 1-118-63270-2
816 pp. Pub: 06/12/13
Computational / Numerical Methods
This updated/expanded edition of the bestselling textbook provides a comprehensive introduction to the methods and theory of nonlinear finite element analysis. New material provides a concise introduction to some of the cutting-edge methods that have evolved in recent years in the field of nonlinear finite element modeling, and includes the eXtended finite element method (XFEM), multiresolution continuum theory for multiscale microstructures, and dislocation-density-based crystalline plasticity.
It focuses on the formulation and solution of discrete equations for various classes of problems that are of principal interest in applications to solid and structural mechanics. Topics covered include the discretization by finite elements of continua in one dimension and in multi-dimensions; the formulation of constitutive equations for nonlinear materials and large deformations; procedures for the solution of the discrete equations, including considerations of both numerical and multiscale physical instabilities; and the treatment of structural and contact-impact problems.
• Presents a detailed and rigorous treatment of nonlinear solid mechanics and how it can be implemented in finite element analysis
• Covers many of the material laws used in today's software and research
• Introduces advanced topics in nonlinear finite element modelling of continua
Graduate and postgraduate students in mechanical engineering departments. Researchers and practioners in industry.
Ted Belytschko, Walter P. Murphy Professor and McCormick Distinguished Professor of Computational Mechanics, Northwestern University, is currently the Editor-in-Chief of the International Journal for Numerical Methods in Engineering. Wing Kam Liu, Walter P. Murphy Professor, Department of Mechanical Engineering, Northwestern University. Brian Moran, Professor, Department of Mechanical Engineering at Northwestern University. Khalil I. Elkhodary, Northwestern University.
M e c h a n i c a l E n g i n e e r i n g 1 0 W I L E Y
Manufacturing Processes: Modeling and Numerical Simulation
Jean-Michel Bergheau
978-1-84821-358-6 / 1-84821-358-1
320 pp. Pub: 04/12/13
Computational / Numerical Methods
Numerical simulation of manufacturing processes and of their mechanical consequences is of growing interest in industry. But such simulations need the modelling of couplings between several physical phenomena such as heat transfer, material transformations and solid or fluid mechanics, and to adapted numerical methodologies
This book gathers a state of the art on how to simulate industrial processes, which data are needed, and what numerical simulation can bring. It discusses welding processes, material removal shaping, direct elaboration processes, thermo-mechanical processes, and thermo-chemical treatments.
Industry professionals and students learning numerical methods applied to multiphysics problems encountered in manufacturing processes.
Jean Michel Bergheau is Professor at Ecole Nationale d'Ingenieurs de Saint-Etienne, France
Engineering Informatics: Fundamentals of Computer-Aided Engineering
Benny Raphael, Ian F. C. Smith
978-1-119-95341-8 / 1-119-95341-3
360 pp. Pub: 05/07/13
Computational / Numerical Methods
Computers are ubiquitous throughout all life-cycle stages of engineering, from conceptual design to manufacturing maintenance, repair and replacement. It is essential for all engineers to be aware of the knowledge behind computer-based tools and techniques they are likely to encounter. The computational technology, which allows engineers to carry out design, modelling, visualisation, manufacturing, construction and management of products and infrastructure is known as Computer-Aided Engineering (CAE).
This book provides the foundation knowledge of computing that is essential for all engineers. This knowledge is independent of hardware and software characteristics and thus, it is expected to remain valid throughout an engineering career. This Second Edition is enhanced with treatment of new areas such as network science and the computational complexity of distributed systems.
• Covers numerous representation frameworks and reasoning strategies
• Considers the benefits of increased computational power, parallel computing and cloud computing
• Offers many practical engineering examples and exercises, with lecture notes available for many of the topics/chapters from the ASCE Technical Council on Computing and Information Technology, Global Centre of Excellence in Computing (www.asceglobalcenter.org), providing a valuable resource for lecturers.
Graduate students in the civil, mechanical, chemical and environmental fields. Researchers, practising engineers and academics using computer-aided engineering
Benny Raphael, Assistant Professor, School of Design & Environment, National University of Singapore. His main areas of research include Computer-aided engineering, Optimization and Machine learning. Ian Smith, Professor & Head, Applied Computing & Mechanics Laboratory, Civil Engineering Institute, School of Architecture, Civil and Environmental Engineering at EPFL. He is Editor of the Journal of Advanced Engineering Informatics and Associate Editor of Journal of Artificial Intelligence for Engineering Design Analysis and Manufacturing.
M e c h a n i c a l E n g i n e e r i n g 1 1 W I L E Y
Numerical Analysis with Applications in Mechanics and Engineering
Petre P. Teodorescu, Nicolae-Doru Stanescu, Nicolae Pandrea
978-1-118-07750-4 / 1-118-07750-4
646 pp. Pub: 07/06/13
Numerical Methods & Algorithms
A much-needed guide on how to use numerical methods to solve practical engineering problems. Bridging the gap between mathematics and engineering, Numerical Analysis with Applications in Mechanics and Engineering arms readers with powerful tools for solving real-world problems in mechanics, physics, and civil and mechanical engineering. Unlike most books on numerical analysis, this outstanding work links theory and application, explains the mathematics in simple engineering terms, and clearly demonstrates how to use numerical methods to obtain solutions and interpret results.
Each chapter is devoted to a unique analytical methodology, including a detailed theoretical presentation and emphasis on practical computation. Ample numerical examples and applications round out the discussion, illustrating how to work out specific problems of mechanics, physics, or engineering. Readers will learn the core purpose of each technique, develop hands-on problem-solving skills, and get a complete picture of the studied phenomenon. Coverage includes:
• How to deal with errors in numerical analysis
• Approaches for solving problems in linear and nonlinear systems
• Methods of interpolation and approximation of functions
• Formulas and calculations for numerical differentiation and integration
• Integration of ordinary and partial differential equations
• Optimization methods and solutions for programming problems
P. Teodorescu, Professor, University of Bucharest, has published 250 papers in many journals of Romania, Europe and U.S.A. and 26 books. N-D. Stãnescu, Professor, University of Piteti, Romania. N. Pandrea, Professor, University of Piteti.
Fluid Mechanics
Physics and Geochemistry of Water
Christophe Lecuyer
978-1-84821-477-4 / 1-84821-477-4
128 pp. Pub: 01/01/14
Fluid Mechanics
The presence of water on Earth is discussed on the basis of the various theories about its origin such as a massive degassing of the primitive parent bodies that built our planet as well as a late addition from comets that collided with its surface. The extraordinary physico-chemical properties of the water molecule combined to its abundance and repartition at Earth’s surface have contributed to regulate the global climate and to favour the evolution of species for more than 4 billion years. The early emergence of life in the deep ocean and its further diversification were closely linked to the global water cycle whose dynamics results from the energy balance between the solar radiation and the internal heat flux of the Earth.
Scientists, researchers and industrial engineers interested in this subject area
Christophe Lecuyer is Professor of Geochemistry at the University Claude Bernard Lyon 1 since 1999, senior member of the Institut Universitaire de France since 2012, France
M e c h a n i c a l E n g i n e e r i n g 1 2 W I L E Y
Turbulent Multiphase Flows with Heat and Mass Transfer
Fabien Anselmet, Roland Borghi
978-1-84821-617-4 / 1-84821-617-3
400 pp. Pub: 17/12/13
Fluid Mechanics
Numerous industrial systems or natural environments involve multiphase flows with heat and mass transfer, with more than a tenth of direct application fields. The book presents physical modelling of these flows, in a unified way, which can include various physical aspects and several levels of complexity. Thermal engineering and nuclear reactors ; Extraction and transport of petroleum products ; Diesel engines and rocket engines ; Chemical engineering reactors and fluidized beds; Smoke or aerosol dispersion; Landslides and avalanches. Modelling multiphase flows with heat and mass transfer for all of these situations can be developed following a common methodology. The book is devoted to the way to incorporate the adequate physical ingredients in agreement to known experimental facts and make the model evolve according to the required complexity.
The first part of the book will be devoted to the definition and description of the basic approach, which can simply be presented as the generalization of several phases of the usual approach of continuum mechanics in fluid thermomecanics in turbulent flows. The second part will first discuss the modeling principles of the effect of irrerversible processes, which occur in the flows. In the third part, we will take a more detailed look at flows and and granular media. The fourth part will focus on improving the representation of all these media by adding the possibility of better knowing fluctuations around averages.
Engineers who must perform predictions on multiphase flows, in the various application domains listed previously. And also researchers working on these domains. It can also be argued that scientists who are not specialized in any of these domains but are likely to use general commercial CFD codes which are not especially devoted to simulating one multiphase flows but incorporate features for that purpose could gain useful physical insights reading the book.
Roland Borghi and Fabien Anselmet are Professor Emeritus and Professor at Ecole Centrale Marseille, France.
Nanoimprint Technology: Nanotransfer for Thermoplastic and Photocurable Polymers
Jun Taniguchi, Hiroshi Ito, Jun Mizuno, Takushi Saito
978-1-118-35983-9 / 1-118-35983-6
240 pp. Pub: 16/08/13
Fluid Mechanics
Nanoscale pattern transfer technology using molds is a rapidly advancing area and one that has seen much recent attention due to its potential for use in nanotechnology industries and applications. However, because of these rapid advances, it can be difficult to keep up with the technological trends and the latest cutting-edge methods. In order to fully understand these pioneering technologies, a comprehensive understanding of the basic science and an overview of the techniques are required.
Nanoimprint Technology: Nanotransfer for Thermoplastic and Photocurable Polymers covers the latest nanotransfer science based on polymer behaviour. Polymer fluid dynamics are described in detail, and injection moulding, nanoimprint lithography and micro contact printing are also discussed. Cutting-edge nanotransfer technologies and applications are also considered and future trends in industry are examined.
• Comprehensively covers nanoimprint technology and applications.
• Is a thorough review of the state of the art in nanotransfer technology.
• Covers important basic knowledge for researchers considering industrial applications of nanotechnology.
• Includes thorough coverage in the areas of nanoimprint and micro-contact printing.
Engineers in industry. Undergraduate, graduate and post graduate students studying materials sciences, nanotechnology and mechanical engineering
Jun Taniguchi, Associate Professor, Faculty of Industrial Science and Technology, Tokyo University of Science, Japan. Hiroshi Ito, Professor, Department of Polymer Science & Engineering, Yamagata University, Japan. Jun Mizuno, Associate Professor in the Nanotechnology Research Laboratory at Waseda University in Japan. Takushi Saito, Associate Professor in the Department of Mechanical and Control Engineering at Tokyo Institute of Technology in Japan.
M e c h a n i c a l E n g i n e e r i n g 1 3 W I L E Y
Nonlinear Physical Systems: Spectral Analysis, Stability and Bifurcations
Oleg N. Kirillov, Dmitry E. Pelinovsky
978-1-84821-420-0 / 1-84821-420-0
320 pp. Pub: 01/01/14
Mathematical Modeling
This text is a compilation of articles by leading experts in dynamical systems, operator theory, partial differential equations, or solid- and fluid mechanics who participate in BIRS Workshop Spectral Analysis, Stability and Bifurcation in Modern Nonlinear Systems. The articles concentrate on issues of spectral analysis, stability, and bifurcations as they apply to nonlinear partial differential equations in physics. With mechanical and physical examples applied to stability theory, this book is an irreplaceable tool for researchers, engineers, and graduate students.
Researchers, engineers, post-docs and PhD students that work in solid and fluid mechanics, stability and bifurcation theory, dynamical systems, nonlinear partial differential equations, and wave propagation. Researchers, engineers, post-docs and PhD students that work in optics, astrophysics, solid state physics, numerical mathematics, operator theory
Oleg N. Kirillov is a Research Fellow at the Magneto- Hydrodynamics Division of the Helmholtz-Zentrum Dresden-Rossendorf. Dmitry E. Pelinovsky is Professor of Mathematics at University of McMaster, Hamilton, Ontario, Canada
Industrial Engineering
Micro-Cutting: Fundamentals and Applications
Kai Cheng, Dehong Hou
978-0-470-97287-8 / 0-470-97287-4
360 pp. Pub: 30/09/13
Industrial Engineering / Manufacturing
Micro-Cutting is a comprehensive presentation of the state-of-the-art of research and engineering practice in micro cutting, a technique that is becoming increasingly important in modern micro manufacturing, ultraprecision manufacturing and high value manufacturing in particular.
• Addresses basic theory, design and analysis of micro-toolings and machines, modelling methods and techniques, and integrated approaches for micro-cutting
• Provides practicing engineers with good exemplars of how to implement and apply micro-cutting in precision and micro-manufacturing practices
• Presents applications in a variety of machining processes including diamond turning, micro-milling, micro-drilling, micro-grinding/polishing and ultraprecision machining, as well as the design and implementation of micro-cutting process chains and micromachining systems
• Authored by a team of leading global researchers
Postgraduates, researchers and engineers in advanced manufacturing, micromaching and MEMS. Production supervisors, tooling engineers, planning and application engineers, machine tool designers
Professor Kai Cheng holds the chair professorship in Manufacturing Systems at Brunel University. His current research interests focus on micro manufacturing, design of precision machine tools, and global/sustainable manufacturing and systems. Professor Cheng has published over 160 papers in learned international journals and refereed conferences, authored/edited 5 books and contributed 6 book chapters. Professor Cheng is a fellow of the IET and IMechE. He is the head of the Advanced Manufacturing and Enterprise Engineering (AMEE) Department at Brunel, which consists of 10 academics and over 30 research assistants and PhD students. Professor Cheng is the European editor of the International Journal of Advanced Manufacturing Technology and a member of the editorial board of International Journal of Machine Tools and Manufacture.
M e c h a n i c a l E n g i n e e r i n g 1 4 W I L E Y
Zonotopes: From Guaranteed State-estimation to Control
Cristina Stoica, Vu Tuan Hieu Le, Teodoro Alamo, Eduardo F. Camacho, Didier Dumur
978-1-84821-589-4 / 1-84821-589-4
224 pp. Pub: 04/12/13
Industrial Engineering / Quality Control
This book focuses on two significant problems in automatic control: state estimation and robust model predictive control under input and state constraints, and bounded perturbations and noise, based on a zonotopic set-membership approach. Firstly, the authors propose a P-radius-based set-membership estimation method to compute a zonotope containing the real states of a system, which are consistent with the disturbances and measurement noise. Secondly, they deal with the problem of output feedback control. Among the approaches from the literature, the implementation of robust predictive techniques based on trajectory tubes is developed. The zonotopic set-membership estimation improves the quality of the estimation, as well as the performance of the control, for systems subject to unknown, but bounded, disturbances and measurement noise.
Researchers working in Automatic Control (estimation community, predictive control community) including PhD students, industrial partners interested in applying the proposed techniques on real systems. MSc level students, BSc level students.
Cristina Stoica is Assistant Professor at Automatic Control Department, SUPELEC Systems Sciences (E3S), Gif-sur-Yvette, France. Vu Tuan Hieu Le, Postdoctoral position, Unite de Recherche Informatique Automatique, Ecole des Mines de Douai, France. Teodoro Alamo, Professor, Department of Ingenieria de Sistemas y Automatica, Universidad de Sevilla, Spain. Eduardo F. Camacho, Professor, Department of Ingenieria de Sistemas y Automatica, Universidad de Sevilla, Spain. Didier Dumur, Professor, Automatic Control Department, SUPELEC Systems Sciences (E3S), Gif-sur-Yvette, France.
Metaheuristic Optimization for the Design of Automatic Control Laws
Guillaume Sandou
978-1-84821-590-0 / 1-84821-590-8
144 pp. Pub: 20/09/13
Industrial Engineering / Quality Control
The classical approach in automatic control relies on the use of simplified models of the systems and reformulations of the specifications. However, this approach fails when the system is too complex to sufficiently simplify its model, when the designer has a large number of constraints to take into account, or when the goal is to both design then optimize it. This book presents the new trend of utilizing metaheuristic algorithms (such as genetic algorithms and particle swarm optimization) for working with automatic control.
Automatic Control researchers (new approach to solve automatic control problem). Research and Development in the industry community (optimization of control law with no reformulation of specifications). Metaheuristic optimization researchers (Automatic Control is a broad field of applications for metaheuristic methods but which is under exploited).
Guillaume Sandou is Associate Professor, SUPELEC Systems Sciences (E3S), Control Department, Gif sur Yvette, France.
M e c h a n i c a l E n g i n e e r i n g 1 5 W I L E Y
Risk Analysis: Socio-technical and Industrial Systems
Jean-Marie Flaus
978-1-84821-492-7 / 1-84821-492-8
400 pp. Pub: 20/08/13
Industrial Engineering Special Topics
An overview of the methods used for risk analysis in a variety of industrial sectors, with a particular focus on the consideration of human aspects, this book provides a definition of all the fundamental notions associated with risks and risk management, as well as clearly placing the discipline of risk analysis within the broader context of risk management processes.
The author begins by presenting a certain number of basic concepts, followed by the general principle of risk analysis. He then moves on to examine the ISO31000 standard, which provides a specification for the implementation of a risk management approach. The ability to represent the information we use is crucial, so the representation of knowledge, covering both information concerning the risk occurrence mechanism and details of the system under scrutiny, is also considered. The different analysis methods are then presented, firstly for the identification of risks, then for their analysis in terms of cause and effect, and finally for the implementation of safety measures. Concrete examples are given throughout the book and the methodology and method can be applied to various fields (industry, health, organization, technical systems).
Architects, engineers and product managers. Researchers, Faculty in Computer Science and Electrical Engineering. Master and PhD students in Computer Science and Electrical Engineering
Jean-Marie Flaus, Professor, Universite Joseph Fourier Grenoble
Model Based Systems Engineering: Fundamentals and Methods
Patrice Micouin
978-1-84821-469-9 / 1-84821-469-3
192 pp. Pub: 04/12/13
Systems Engineering & Management
This book is a contribution to the definition of a model based system engineering (MBSE) approach, designed to meet the objectives laid out by the INCOSE. After pointing out the complexity that jeopardizes a lot of system developments, the book examines fundamental aspects of systems under consideration. It goes on to address methodological issues and proposes a methodic approach of MBSE that provides, unlike current practices, systematic and integrated model-based engineering processes. An annex describes relevant features of the VHDL-AMS language supporting the methodological issues described in the book.
Scientists, researchers and industrial engineers interested in this subject area
Senior Consultant in the Systems Engineering area, Dr Patrice Micouin works as a self employed
M e c h a n i c a l E n g i n e e r i n g 1 6 W I L E Y
Quality Function Deployment for Sustainable Development
H. Raharjo
978-1-118-46963-7 / 1-118-46963-1
300 pp. Pub: 17/01/14
Industrial Engineering / Manufacturing
This book will first provide a general overview of QFD methodology. It will then present some recent developments to enhance the basic QFD approach in some specific applications and decision analysis. An example-based approach is used throughout all chapters. To be self-contained, a concise description of QFD principles and how it works are provided to give a smooth start for those who are new to QFD. This book further extends the basic QFD research into three directions towards sustainable product development:
• In-depth treatment on the future voice of customer
• Extended utilization of QFD matrices beyond the traditional house of quality
• Recent advances in QFD towards sustainable product development
Engineering managers, quality engineers, students and researchers interested in quality issues.
Hendry Raharjo, Division of Quality Sciences, Department of Technology Management and Economics, Chalmers University of Technology, Gothenburg, Sweden. Kwai-Sang Chin, Associate Professor, Department of Systems Engineering and Engineering Management, City University of Hong Kong, Hong Kong. Min Xie (Chair Professor), Department of Systems Engineering and Engineering Management, City University of Hong Kong, Hong Kong
Energy Efficient Manufacturing with Applications
J. Sutherland
978-1-118-42384-4 / 1-118-42384-4
400 pp. Pub: 17/01/14
Industrial Engineering / Manufacturing
Over the last several years, manufacturers have expressed increasing interest in reducing their energy consumption and have begun to search for opportunities to reduce their energy usage. In this book, the authors explore a variety of opportunities to reduce the energy footprint of manufacturing. These opportunities cover the entire spatial scale of the manufacturing enterprise: from unit process-oriented approaches to enterprise-level strategies. Each chapter examines some aspect of this spatial scale, and discusses and describes the opportunities that exist at that level. Case studies demonstrate how the opportunity may be acted on with practical guidance on how to respond to these opportunities.
Mechanical, industrial and manufacturing engineers as well as anyone in engineering and practicing engineers who desire to become more knowledgeable about how to reduce energy consumption.
John W. Sutherland is Professor and Fehsenfeld Family Head of Environmental and Ecological Engineering at Purdue University. Prior to assuming his present position, he held a variety of positions at Michigan Technological University. Sutherland has mentored over 70 graduate students to the completion of their degrees and has published over 250 papers in various journals and conference proceedings. He is a Fellow of SME, ASME, and CIRP. David A. Dornfeld is Will C. Hall Family Professor and Chair of Mechanical Engineering at University of California Berkeley. He leads the Laboratory for Manufacturing and Sustainability (LMAS). He has published over 350 papers, authored three research monographs, contributed chapters to several books and has seven patents. He is Fellow of American Society of Mechanical Engineers (ASME), recipient of ASME Ennor Award, 2010 and Blackall Machine Tool and Gage Award, 1986, Fellow of Society of Manufacturing Engineers (SME), recipient of 2004 SME Fredrick W. Taylor Research Medal, member Japan Society of Precision Engineering (JSPE) and recipient of 2005 JSPE Takagi Prize, Fellow of University of Tokyo Engineering and Fellow of CIRP (Int'l Academy for Production Engineering). Barbara S. Linke is serving as a Post-doctoral Fellow at UC Berkeley with support from the German Research Foundation (DFG), where she is undertaking her habilitation thesis on the life cycle of abrasive cutting tools.
M e c h a n i c a l E n g i n e e r i n g 1 7 W I L E Y
Mechanical Engineering
Structural Dynamic Analysis with Generalized Damping Models
Sondipon Adhikari
978-1-84821-521-4 / 1-84821-521-5
352 pp. Pub: 04/10/13
Mechanical Engineering - Design
Since Lord Rayleigh introduced the idea of viscous damping in his classic work The Theory of Sound in 1877, it has become standard practice to use this approach in dynamics, covering a huge range of applications from aerospace to civil engineering.
However, in the majority of practical cases this approach is adopted more for mathematical convenience than modeling the physics of vibration damping. Over the past decade extensive research has been carried out on more general "non-viscous" damping models and the vibration of non-viscously damped systems. This book is the first comprehensive text to cover vibration problems with general nonviscous damping. The author has drawn on his considerable research experience to produce a volume covering: non-viscously damped single and multi-degree of freedom systems; continuous systems with nonlocal and non-viscous damping; identification of non-viscous damping; computational aspects of non-proportional and non-viscous damping and sensitivity analysis. The text is written from a vibration theory standpoint, with numerous worked examples relevant across a wide range of mechanical, aerospace and structural engineering applications.
This book aims to give engineering graduate students, researchers and practicing engineers a detailed understanding of the methods of analysis necessary for complex structural systems with more general non viscous damping models.
Sondipon Adhikari, Chair, Professor of Aerospace Engineering, Swansea University, Swansea, UK
Programming the Finite Element Method, 5e
Ian Smith, Vaughan Griffiths, Lee Margetts
978-1-119-97334-8 / 1-119-97334-1
704 pp. Pub: 04/10/13
Mechanical Engineering - Design
A valuable reference and guide on finite element programming is now fully revised with new material on advances in parallel computing, stress analysis, the interface with commercial packages and other topics.
This new 5th edition offers timely revisions that include
programs and subroutine libraries fully updated to Fortran 2003, which are freely available online, and provides updated material on advances in parallel computing, thermal stress analysis, plasticity return algorithms, convection boundary conditions, and interfaces to third party tools such as ParaView, METIS and ARPACK. As in the previous editions, a wide variety of problem solving capabilities are presented including structural analysis, elasticity and plasticity, construction processes in geomechanics, uncoupled and coupled steady and transient fluid flow and linear and nonlinear solid dynamics.
• Shows how to develop computer programmes which solve specific engineering problems using the finite element method to assemble computer programmes to produce numerical results to solve these problems
• Updated to take into account advances in parallel computing, eg mixed MPI/OpenMP, as well as new material on thermal stress analysis
• Provides an updated version of Fortran 2003 (all the Fortran programs and subroutines are listed in full in the text but will also be made available online)
• Includes exercises for students to solve.
Undergraduate and postgraduate students and researchers in all fields of civil and mechanical engineering, applied maths, numerical analysis and physics. Practitioners in the above fields, as well as electrical and aerospace engineering
Professor Ian Smith is Professor Emeritus at the University of Manchester. He is a Fellow of Royal Academy of Engineering and has 200 published research papers. He has authored 5 books, the latest "Boundary Element Method with Programming"(Springer 2008). Professor Vaughn Griffiths is Professor of Civil Engineering, Division of Engineering at the Colorado School of Mines. Dr Lee Margetts is Head of Synthetic Environments at the University of Manchester Aerospace Research Institute.
M e c h a n i c a l E n g i n e e r i n g 1 8 W I L E Y
Nonlinear Beam and Cable Mechanics: Mathematical Modeling and Engineering Applications
A. Luongo
978-1-84821-421-7 / 1-84821-421-9
352 pp. Pub: 04/12/13
Mechanical Engineering - Design
This book provides engineers with complete guidance to the modeling and applications of nonlinear beams and cables. It begins by formulating nonlinear models of elastic and visco-elastic one-dimensional continuous structures. It then goes on to treat several models of increasing complexity, including straight or curved, planar or non-planar, extensible or inextensible, shearable or unshearable, warping-unsensitive or sensitive, and prestressed or unprestressed beams, both in statics and dynamics. Lastly, typical engineering problems are solved using perturbation and/or numerical approaches.
Scientists, PhD Students in Civil & Mechanical Engineering, as well in Applied Mathematics. Professional Engineers
Angelo Luongo is Full Professor at University of L'Aquila, Italy. Daniele Zulli, Assistant Professor, University of L'Aquila, Italy
Non-local Structural Mechanics
Tony Murmu, Sondipon Adhikari, Michael McCarthy
978-1-84821-522-1 / 1-84821-522-3
352 pp. Pub: 04/12/13
Mechanical Engineering - Design
This book gives science and engineering graduates and researchers a detailed understanding of the methods of non-local analysis necessary for nanoscale structures.
The conventional local elasticity theory has underpinned the majority of applications of continuum mechanics in applied science and engineering since its inception in the early 19th Century. The application of the local elasticity theory in the context of nanoscale objects has been repeatedly questioned in various research articles over the past decade. Non-local elasticity theory, pioneered from the 1970s, is a scale-dependent theory and is considered to be more suitable for analyzing nanoscale objects such as carbon nanotubes and graphene sheets.
This book is the first comprehensive text to cover non-local elasticity theory for static, dynamic and stability analysis of wide-ranging nanostructures. The authors draw on their considerable research experience in this field. The text will be written from a mechanics standpoint, with numerous worked examples relevant across a wide range of nanomechanical systems.
Under-graduate and post-graduate students and academic researchers in applied physics, chemistry, mechanical and aerospace engineering. This book will also be highly useful for practicing engineers working in NEMS, MEMS and sensor problems.
Tony Murmu is a Postdoctoral Research Fellow Irish Research Council for Science, Engineering & Technology Mechanical, Aeronautical and Biomedical Engineering University of Limerick, Limerick Republic of Ireland
M e c h a n i c a l E n g i n e e r i n g 1 9 W I L E Y
Control of Cutting Vibration and Machining Instability: A Time-Frequency Approach for Precision, Micro and Nano Machining
C. Steve Suh, Meng-Kun Liu
978-1-118-37182-4 / 1-118-37182-8
248 pp. Pub: 13/09/13
Mechanical Engineering - Design
Machining instability is a topical area, and there are a wide range of publications that cover the topic. However, many of these previous studies have started by assuming that the behavior of the system can be linearised. Meanwhile, there are many recent advances in the fields of signal processing, nonlinear dynamics, and nonlinear control, all of which are relevant to the machining stability problem. This book establishes the fundamentals of cutting mechanics and machine tool dynamics in the simultaneous time-frequency domain. The new nonlinear control theory developed by the authors that facilitates simultaneous control of vibration amplitude in the time-domain and spectral response in the frequency-domain provides the foundation for the development of a controller architecture universally viable for the control of dynamic instability including bifurcation and chaos. Once parameters underlying the coupling, interaction, and evolution of different cutting states and between the tool and workpiece are established, they can then be incorporated into the architecture to create a control methodology that mitigate machining instability and enable robust, chatter-free machine tool design applicable in particular to high speed micro- and nano-machining.
• Provides a clear and concise approach to the understanding and control of machine tool and workpiece vibrations from an alternative view, contributing to an in-depth understanding of cutting dynamics and robust control of machining instability
Practicing engineers. Graduate and senior undergraduates; Research professionals.
Dr C. Steve Suh, Director, Institute for Innovation and Design in Engineering, Department of Mechanical Engineering, Texas A&M University, USA, has co-authored numerous journals articles and a book, and was Guest Editor of the Journal of Vibration and Control in 2007. Meng-Kun Liu, Ph.D. Candidate, Nonlinear Dynamics and Control, Texas A&M University, Mechanical Engineering, College Station, Texas.
Optimal Modified Continuous Galerkin CFD
Allen J. Baker
978-1-119-94049-4 / 1-119-94049-4
576 pp. Pub: 03/01/14
Mechanical Engineering - Design
Covers the theory and applications of using weak form theory in incompressible fluid-thermal sciences. Giving you a solid foundation on the Galerkin finite-element method (FEM), this book promotes the use of optimal modified continuous Galerkin weak form theory to generate discrete approximate solutions to incompressible-thermal Navier-Stokes equations. The book covers the topic comprehensively by introducing formulations, theory and implementation of FEM and various flow formulations.
The author first introduces concepts, terminology and methodology related to the topic before covering topics including aerodynamics; the Navier-Stokes Equations; vector field theory implementations and large eddy simulation formulations.
• Introduces and addresses many different flow models (Navier-Stokes, full-potential, potential, compressible/ incompressible) from a unified perspective
• Focuses on Galerkin methods for CFD beneficial for engineering graduate students and engineering professionals
• Accompanied by a website with sample applications of the algorithms and example problems and solutions
This approach is useful for graduate students in various engineering fields and as well as professional engineers.
Professor Baker is Professor Emeritus in both the Engineering Science Department and the Computational Mechanics Department at the University of Tennessee. Prior to this he was Director of UT CFD Laboratory at the University of Tennessee. He is a Fellow of International Association for Computational Mechanics (IACM) and the US Association for Computational Mechanics (USACM) as well as being an Associate Fellow of the American Institute of Aeronautics and Astronautics (AIAA). Professor Baker has devised many courses on FEA-related topics during his career and has also written multiple books and journal articles.
M e c h a n i c a l E n g i n e e r i n g 2 0 W I L E Y
Active and Passive Vibration Damping
Amr M. Baz
978-1-118-48192-9 / 1-118-48192-5
492 pp. Pub: 03/01/14
Mechanical Engineering - Design
An important work presenting in one volume the application of viscoelastic damping materials to control vibration and noise of structures, machinery, and vehicles.
• Written by an internationally recognized authority and pioneer, it summarizes and presents comprehensive coverage in one volume material that until now appears throughout a selection of references
• Presents a mix of the associated physical fundamentals, governing theories and optimal design strategies of various configurations of vibration damping treatments, a comprehensive coverage not available elsewhere
• With companion website including MATLAB software, solutions to all problems, and power point slides, the supporting tools enable hands-on experience of the analysis, design, optimization, and application to a wide range of situations
Researchers in vibration damping/research engineers in structural dynamics (automobile, aerospace, naval and civil engineering industries), practicing engineers in materials and mechanical engineering. Senior undergraduate students, and graduate students in vibrations and vibrations damping
Amr Baz, Professor & Director of Smart Materials & Structures Research Center, Mechanical Engineering Department, University of Maryland, USA. Dr Baz obtained his PhD in 1973 from Univ. of Wisconsin, Madison, USA. His research interests include active and passive control of vibration and noise; active constrained layer damping; magnetic composites, virtual reality design of smart structures, and active acoustic metamaterials. He is Associate Editor of Vibration and Control Journal, Intl. Journal of Smart Structures & Systems, and Journal of Mechanics of Advanced Materials and Structures. In May 2012 Dr Baz received the American Society of Mechanical Engineers (ASME) Adaptive Structures and Material Systems Prize, awarded to someone who has, "made significant contributions to the sciences and technologies associated with adaptive structures and/or materials systems. He also appears in the Who's Who of American Inventors.
Stochastic Structural Dynamics: Application of Finite Element Methods
Cho W. S. To
978-1-118-34235-0 / 1-118-34235-6
352 pp. Pub: 29/11/13
Numerical Methods
One of the first books to provide in-depth and systematic application of finite element methods to the field of stochastic structural dynamics.
The parallel developments of the Finite Element Methods in the 1950's and the engineering applications of stochastic processes in the 1940's provided a combined numerical analysis tool for the studies of dynamics of structures and structural systems under random loadings. In the open literature, there are books on statistical dynamics of structures and books on structural dynamics with chapters dealing with random response analysis. However, a systematic treatment of stochastic structural dynamics applying the finite element methods seems to be lacking. Aimed at advanced and specialist levels, the author presents and illustrates direct integration methods for analyzing the statistics of the response of structures to stochastic loads. The analysis methods are based on structural models represented via the Finite Element Method. In addition to stationary linear problems the text also addresses non-stationary excitation and systems with spatially stochastic property variations.
• A systematic treatment of stochastic structural dynamics applying the finite element methods
• Highly illustrated throughout and aimed at advanced and specialist levels, it focuses on computational aspects instead of theory
• Emphasizes results mainly in the time domain with limited contents in the frequency domain
• Presents and illustrates direct integration methods for analyzing the statistics of the response of structures to stochastic loads.
Post/graduates, research applied scientists, engineers, and professors.
Cho Wing Solomon To is Professor of Mechanical Engineering at the University of Nebraska-Lincoln, USAHe is a member of the American Society of Mechanical Engineers (ASME), the American Academy of Mechanics (AAM), the Society of Industrial and Applied Mathematics (SIAM), and a founder Fellow of the Institution of Diagnostics Engineers, U.K. He served as chair of the ASME Finite Element Techniques and Computational Technologies Technical Committee.
M e c h a n i c a l E n g i n e e r i n g 2 1 W I L E Y
Method of Moments for the Scattering from 2D Problems: Basic Concepts and Applications
Christophe Bourlier, Nicolas Pinel
978-1-84821-472-9 / 1-84821-472-3
160 pp. Pub: 20/08/13
Numerical Methods & Algorithms
Electromagnetic wave scattering from randomly rough surfaces in the presence of scatterers is an active, interdisciplinary area of research with myriad practical applications in fields such as optics, acoustics, geoscience and remote sensing.
In this book, the Method of Moments (MoM) is applied to compute the field scattered by scatterers such as canonical objects (cylinder or plate) or a randomly rough surface, and also by an object above or below a random rough surface. Since the problem is considered to be 2D, the integral equations (IEs) are scalar and only the TE (transverse electric) and TM (transverse magnetic) polarizations are addressed (no cross-polarizations occur). In Chapter 1, the MoM is applied to convert the IEs into a linear system, while Chapter 2 compares the MoM with the exact solution of the field scattered by a cylinder in free space, and with the Physical Optics (PO) approximation for the scattering from a plate in free space. Chapter 3 presents numerical results, obtained from the MoM, of the coherent and incoherent intensities scattered by a random rough surface and an object below a random rough surface. The final chapter presents the same results as in Chapter 3, but for an object above a random rough surface. In these last two chapters, the coupling between the two scatterers is also studied in detail by inverting the impedance matrix by blocks.
Christophe Bourlier works at the IETR (Institut d’Electronique et de Télécommunications de Rennes) laboratory at Polytech Nantes (University of Nantes, France) as well as being a Researcher at the French National Center for Scientific Research (CNRS) on electromagnetic wave scattering from rough surfaces and objects for remote sensing applications and radar signatures. He is the author of more than 160 journal articles and conference papers. Nicolas Pinel is currently working as a Research Engineer at the IETR laboratory at Polytech Nantes and is about to join Alyotech Technologies in Rennes, France. Gildas Kubické is in charge of the “Expertise in electroMagnetism and Computation” (EMC) laboratory at the DGA (Direction Générale de l’Armement), French Ministry of Defense.
Modeling and Optimization of Air Traffic
Daniel Delahaye, Stephane Puechmorel
978-1-84821-595-5 / 1-84821-595-9
352 pp. Pub: 01/08/13
Numerical Methods & Algorithms
This book combines the research activities of the authors, both of whom are researchers at Ecole Nationale de l'Aviation Civile (French National School of Civil Aviation), and presents their findings from the last 15 years. Their work uses air transport as its focal point, within the realm of mathematical optimization, looking at real life problems and theoretical models in tandem, and the challenges that accompany studying both approaches.
The authors' research is linked with the attempt to reduce air space congestion in Western Europe, USA and, increasingly, Asia. They do this through studying stochastic optimization (particularly artificial evolution), the sectorization of airspace, route distribution and takeoff slots, and by modeling airspace congestion. Finally, the authors discuss their short, medium and long term research goals. They hope that their work, although related to air transport, will be applied to other fields, such is the transferable nature of mathematical optimization. At the same time, they intend to use other areas of research, such as approximation and statistics to complement their continued inquiry in their own field.
Scientists, researchers and engineers interested in this subject area
Daniel Delahaye works for Ecole Nationale de l'Aviation Civile (French National School of Civil Aviation) in France. Stephane Puechmorel works for Ecole Nationale de l'Aviation Civile (French National School of Civil Aviation) in France.
M e c h a n i c a l E n g i n e e r i n g 2 2 W I L E Y
Proportionate-type Normalized Least Mean Square Algorithms
Kevin Wagner, Milos Doroslovacki
978-1-84821-470-5 / 1-84821-470-7
192 pp. Pub: 01/08/13
Numerical Methods & Algorithms
The topic of this book is proportionate-type normalized least mean squares (PtNLMS) adaptive filtering algorithms, which attempt to estimate an unknown impulse response by adaptively giving gains proportionate to an estimate of the impulse response and the current measured error. These algorithms offer low computational complexity and fast convergence times for sparse impulse responses in network and acoustic echo cancellation applications. New PtNLMS algorithms are developed by choosing gains that optimize user-defined criteria, such as mean square error, at all times. PtNLMS algorithms are extended from real-valued signals to complex-valued signals. The computational complexity of the presented algorithms is examined.
Scientists, researchers and industrial engineers interested in this subject area
Kevin Wagner has been a physicist with the Radar Division of the Naval Research Laboratory, Washington, DC, USA since 2001. His research interests are in the area of adaptive signal processing and non-convex optimization. Milos Doroslovacki has been with the Department of Electrical and Computer Engineering at George Washington University, USA since 1995, where he is now an Associate Professor. His main research interests are in the fields of adaptive signal processing, communication signals and systems, discrete-time signal and system theory, and wavelets and their applications.
Spatial and Spatio-temporal Data Analysis
Jean Dube, Diego Legros
978-1-84821-468-2 / 1-84821-468-5
192 pp. Pub: 04/04/14
Numerical Methods & Algorithms
This book provides an introduction to spatial analyses concerning disaggregated (or micro) spatial data.
Particular emphasis is put on spatial data compilation and the structuring of the connections between the observations. Descriptive analysis methods of spatial data are presented in order to identify and measure the spatial, global and local dependency.
The authors then focus on autoregressive spatial models, to control the problem of spatial dependency between the residues of a basic linear statistical model, thereby contravening one of the basic hypotheses of the ordinary least squares approach.
This book is a popularized reference for students looking to work with spatialized data, but who do not have the advanced statistical theoretical basics.
Scientists, researchers and industrial engineers interested in this subject area
Jean Dube is an Economist specialising in Land Planning at University of Rimouski, Quebec, Canada. Diego Legros is Senior lecturer at Laboratory of Economics and Management, University of Bourgogne, Dijon, France
M e c h a n i c a l E n g i n e e r i n g 2 3 W I L E Y
Co-Clustering
Gerard Govaert, Mohamed Nadif
978-1-84821-473-6 / 1-84821-473-1
320 pp. Pub: 04/12/13
Numerical Methods & Algorithms
Briefly presenting different methods from well-established to more recent, Co-Clustering considers a number of different approaches and addresses the difficulty of these classical methods to tackle the high dimensionality, the sparsity, and the scalability that leads to co-clustering. In this text for scientists, researchers, and industrial engineers, co-clustering or biclustering is presented as simultaneous clustering, as a model-based co-clustering, as an approximation of matrix, and as the research of coherent co-clusters in biological terms or the extraction of co-clusters under conditions.
Scientists, researchers and industrial engineers interested in this subject area
Gerard Govaert is Professor at University of Technology, Compiegne, France. Mohamed Nadif is Professor at University of Paris-Descartes, France
Algorithms and Ordering Heuristics for Distributed Constraint Satisfaction Problems
Mohamed Wahbi
978-1-84821-594-8 / 1-84821-594-0
176 pp. Pub: 08/07/13
Numerical Methods & Algorithms
DisCSP (Distributed Constraint Satisfaction Problem) is a general framework for solving distributed problems arising in Distributed Artificial Intelligence.
A wide variety of problems in artificial intelligence are solved using the constraint satisfaction problem paradigm. However, there are several applications in multi-agent coordination that are of a distributed nature. In this type of application, the knowledge about the problem, that is, variables and constraints, may be logically or geographically distributed among physical distributed agents. This distribution is mainly due to privacy and/or security requirements. Therefore, a distributed model allowing a decentralized solving process is more adequate to model and solve such kinds of problem. The distributed constraint satisfaction problem has such properties.
Practitioners and post-graduate students.
Mohamed Wahbi is currently an associate lecturer at Ecole des Mines de Nantes in France. He received his PhD degree in Computer Science from University Montpellier 2, France and Mohammed V University-Agdal, Morocco in 2012 and his research focused on Distributed Constraint Reasoning.
M e c h a n i c a l E n g i n e e r i n g 2 4 W I L E Y
Bistatic SAR / ISAR / FSR: Theory Algorithms and Program Implementation
Andon Lazarov, Pavlov Todor Kostadinov, Petrov Dimitar Minchev
978-1-84821-574-0 / 1-84821-574-6
192 pp. Pub: 03/02/14
Numerical Methods & Algorithms
A general theoretical description of bistatic technology within the scope of synthetic aperture, inverse synthetic aperture and forward scattering radars from the point of view of analytical geometrical and signal formation and processing theory. Signal formation and image reconstruction algorithms are developed in this title, with application of high informative linear frequency and phase code modulating techniques. Numerical experiments that confirm theoretical models are carried out and the authors suggest program implementation for the algorithms developed.
Industrial radar experts; academicians and university lecturers and researches in the area of synthetic aperture radar and inverse synthetic aperture radar technology, forward scattering radars, Radar software developers, Radar hardware developers, Radar Signal and Image Processing experts.
Andon Lazarov is Professor of Informatics and Technical Sciences at Bourgas Free University, Bourgas, Bulgaria
Applied Reliability Engineering and Risk Analysis: Probabilistic Models and Statistical Inference
Ilia Frenkel
978-1-118-53942-2 / 1-118-53942-7
464 pp. Pub: 18/11/13
Quality & Reliability
Presents the latest developments in the field of reliability science focusing on applied reliability, probabilistic models and risk analysis this book provides up-to-date developments and consolidates research activities in several areas of applied reliability engineering.
The publication is timed to commemorate Boris Gnedenko's centennial, bringing together leading researchers, scientists, and practitioners in his field expertise. The Introduction, written by Prof. Ushakov, a personal friend and a colleague of Boris Gnedenko, explains the significant impact and contribution of Gnedenko's work on reliability theory and modern reliability practice. The book covers conventional and contemporary (recently emerged) topics in reliability science, which have seen extended research activities in the recent years.
• The first book to treat the important areas of degradation analysis, multi-state system reliability, networks and large scale systems in one comprehensive volume
• Covers all the recent advances in the individual fields with the most up-to-date research and results -- other books on these topics are outdated
• Chapters written by the lead scientists, researchers and practitioners in their respective reliability fields
• Describes theoretical and practical issues, and contains several supporting case studies
Engineers. Students
Ilia Frenkel, Director, Centre for Reliability & Risk Management, Industrial Engineering & Management Dept, Shamoon College of Engineering, Israel, is a member of the editorial board on Maintenance & Reliability, Communications in Dependability & Quality Management. Alex Karagrigoriou, Department of Mathematics and Statistics, University of Cyprus. Anatoly Lisnianski, Reliability Department, The Israel Electric Corporation Ltd., Israel. Andre Kleyner, Global Reliability Engineering Leader, Delphi Electronics and Safety, USA.
M e c h a n i c a l E n g i n e e r i n g 2 5 W I L E Y
Solid Mechanics
Dimensional Analysis and Similarity Theory in Applied Mechanics and Heat Transfer
Branko M. Milisavlevich
978-1-84821-343-2 / 1-84821-343-3
256 pp. Pub: 04/11/13
Solid Mechanics
Dimensional analysis is an essential scientific method and a powerful tool for solving problems in physics and engineering. Similarity theory establishes similarity criteria for different physical phenomena and studies the properties of the phenomena by means of these criteria. This book discusses how dimensional analysis and similarity theory are applied to solving problems in applied mechanics and heat transfer and will appeal to scientists, researchers, and industrial engineers interested in this subject area.
Scientists, researchers and engineers interested in this subject area
Branko Milisavlevich is Professor at Advanced Engineering School in Skolska, Serbia
Polymer Matrix Syntactic Foams: Microstructure, Properties, and Applications
Nikhil Gupta
978-1-119-96401-8 / 1-119-96401-6
256 pp. Pub: 31/01/14
Solid Mechanics
A cohesive introduction to polymer matrix syntactic foams, this book helps readers understand how the innovative use of porosity can help in developing lightweight materials with high mechanical properties. The author provides a detailed comparison of syntactic foams with other lightweight materials, which are presented in terms of mechanical properties and failure mechanisms. Comparison charts are also included for mechanical properties such as strength and modulus with respect to density.
The book also lays the foundation for understanding the matrix materials and microspheres that are typically utilized in the making of these lightweight materials. How the properties and characteristics of syntactic foams can be further improved via the use of reinforcement materials such as nanoparticles, nanofibers, conventional fibers and toughening rubbers, are also considered.
• By focusing on structural characteristics, the author ensures that readers without an advanced technical background can engage with the subject
• Includes comparison charts, comparing syntactic foams with other lightweight materials, to visually show trends between them in a clear manner
• Features a large collection of micrographs of raw materials and different types of syntactic foams
• Types and applications covered include self-healing syntactic foams and metal matrix syntactic foams for weight saving applications such as in aerospace design
• Coverage of production and processing enables readers to integrate processes into established production chains
• Growing topics in the area such as nano aspects are also considered
Practicing engineers.
Nikhil Gupta is Associate Professor in the Department of Mechanical and Aerospace Engineering at the Polytechnic Institute of New York University and is also Director of the Composite Materials and Mechanics Laboratory. He is the owner of two patents and multiple journal and conference papers on the topic.
M e c h a n i c a l E n g i n e e r i n g 2 6 W I L E Y
Advanced Structural Damage Detection: From Theory to Engineering Applications
Tadeusz Stepinski, Tadeusz Uhl, Wieslaw Staszewski
978-1-118-42298-4 / 1-118-42298-8
352 pp. Pub: 07/06/13
Solid Mechanics
Structural Health Monitoring (SHM) is the interdisciplinary engineering field devoted to the monitoring and assessment of structural health and integrity. SHM technology integrates non-destructive evaluation techniques using remote sensing and smart materials to create smart self-monitoring structures characterized by increased reliability and long life. Its applications are primarily systems with critical demands concerning performance where classical onsite assessment is both difficult and expensive.
• Takes a multidisciplinary approach and provides a comprehensive review of main SHM techniques
• Presents real case studies and practical application of techniques for damage detection in different types of structures
• Presents a number of new/novel data processing algorithms
• Demonstrates real operating prototypes
Industry engineers, designers and manufacturers in mechanical and civil engineering. Graduate and postgraduate students in mechanical and civil engineering.
Tadeusz Stepinski is currently a Professor at Uppsala University, and since 2012 has also been a Professor at AGH University of Science and Technology in Poland. Tadeusz Uhl is a Professor at AGH University of Science and Technology in Poland. His main research areas are system identification, inverse problems, SHM and mechatronics. He has written circa 300 technical papers. Wies³aw Staszewski is a Professor at AGH University of Science and Technology in Poland. He has authored circa 280 publications, predominantly in the areas of damage detection and advanced signal processing. He has written and edited a book, authored circa 90 journal papers and is also an editor and associate editor of five journals. He was jointly awarded the "2004 Person of the Year" title by Structural Health Monitoring journal for outstanding contribution in the field of SHM.
Practical Multiscaling
Jacob Fish
978-1-118-41068-4 / 1-118-41068-8
400 pp. Pub: 30/08/13
Solid Mechanics
Multiscale computations have been identified as one of the areas critical to future nanotechnology and biotechnology advances. Combining fundamental theory and practical methods of multiscale modeling, Practical Multiscaling contains a detailed exposition of the state-of-the-art multiscale theories and their insertion into conventional (single-scale) finite element code architecture. Presenting fundamental modeling techniques aimed at bridging diverse temporal and spatial scales, the text focuses on practical multiscale methods that account for fine-scale (material) details, but do not require their precise resolution. This is a trove of valuable material for graduate and postgraduate students.
• Contains a detailed exposition of the state-of-the-art multiscale theories and their insertion into conventional (single-scale) finite element code architecture.
• Considers the robustness and design aspects of multiscale methods.
• Suitable as a text for courses on multiscale science and engineering.
• Accompanied by a website hosting multiscale design software
Graduate and postgraduate students in mechanical, civil, aerospace and automotive engineering. Engineers in civil, aerospace, pharmaceutical, electronics and automotive industries
Jacob Fish is the Robert A. W. and Christine S. Carleton Professor in Civil Engineering at Columbia University. He is the Founder and Editor-in-Chief of the International Journal of Multiscale Computational Engineering and serves as an Associate Editor of the International Journal for Numerical Methods in Engineering. He is also on the editorial board of the Computer Methods in Applied Mechanics and Engineering, the International Journal of Computational Methods and the International Journal of Computational Engineering Science. He has has written over 160 journal articles, book chapters and has authored two previous books. Dr. Fish specializes in Multiscale Science and Engineering with applications to aerospace, automotive industry, civil engineering, biological and material sciences
M e c h a n i c a l E n g i n e e r i n g 2 7 W I L E Y
Thermodynamics
Fundamentals of the Finite Element Method for Heat and Flow, 2e
Perumal Nithiarasu, Roland W. Lewis
978-0-470-75625-6 / 0-470-75625-X
576 pp. Pub: 04/07/14
Thermodynamics
This 2nd
edition is much extended, and is much improved as both a reference and textbook for research and training. It includes a total of 8 new chapters on the topics of radiation heat transfer, heat exchangers, mass transfer, solidification and melting, turbulent heat transfer, adaptive finite element methods, new applications such as fuel cell modelling and special topics of particular interest to heat transfer engineers such as micro-heat transfer equipment and micro-channel flows. These new topics, along with examples of their applications, serve to further illustrate the capabilities and versatility of the finite element method and educate the reader as to the state-of-the-art of the science and technologies involved. All chapters feature new examples and exercises.
• Appropriate for teaching and research at both fundamental and advanced levels
• Presents several examples of applications of the finite element method that will be of interest to both students and practitioners
• Includes a large number of examples and exercises on heat transfer problems
Students conducting research in the areas of heat transfer and fluid mechanics as well as undergraduate students studying these topics. Mechanical, aeronautical, chemical and nuclear engineers and physicists within the sectors of heat transfer and thermal science in industry.
Roland Lewis is a Professor in the department of Civil Engineering at the University of Wales, Swansea, as has been made an Honorary Professor at the Dalian University of Technology, 1999 Nanyang University of Technology, 2002 and University of Pretoria 2004-2006. He is editor of the International Journal for Numerical Methods in Engineering and Communications in Numerical Methods in Engineering and a globally acknowledged expert in the finite element method and heat transfer. Perumal Nithiarasu is a senior lecturer in the School of Engineering. He is on the editorial board of the IJ Numerical Methods in Fluids and IJ Numerical Methods in Heat Fluid Flow. Kankanhalli Seetharamu is a professor at the Jain College of Engineering, Bangalore, India.
Spring/Summer 2013
Aeronautic & Aerospace
Aircraft Systems Integration of Air-Launched Weapons
Keith A. Rigby
978-0-470-97118-5 / 0-470-97118-5
272 pp. Pub: 12/04/13
Aeronautic & Aerospace Engineering
Tackles all of the fundamental issues pertaining to the complex, multi-disciplinary field of weapons integration that is not currently covered by published literature
• Collates a wide range of topics on weapons integration not yet in the public domain, providing essential reading for aircraft systems engineers.
• Covers all of the fundamental issues including the use of GPS to extend the effectiveness of older airframes (eg B-52), interoperability within NATO countries, and the challenge of the design of autonomous platforms carrying weapons as part of unmanned aircraft systems
• Builds knowledge and experience quicker than would be gained on a real integration programme as well as serving as a useful reference for experienced engineers in the field.
Weapons Engineers and researchers/graduate students in weapons engineering project managers, concepts designers and systems engineers. Project managers, concepts designers and systems engineers.
Keith Rigby is Chief Weapons Engineer, Autonomous Systems, BAE Systems Military Air Solutions. He has spent his entire career with BAE Systems, starting as a graduate in 1984 within Armament Control Systems & progressing to a senior management position on the Tornado GR4 engineering team. He then becoming Head of Weapons Control & Integration within the Air Systems business before assuming his current position in November 2008. During the last 25 years he has been involved in all aspects of the design, development and certification of armament systems and has been a key player in a number of weapon integration programmes including the weaponisation of unmanned systems. He is the author of the Weapons Integration chapter in the Encyclopaedia of Aerospace Engineering,
M e c h a n i c a l E n g i n e e r i n g 2 8 W I L E Y
Design and Analysis of Composite Structures: With Applications to Aerospace Structures, 2e
Christos Kassapoglou
978-1-118-40160-6 / 1-118-40160-3
400 pp. Pub: 05/04/13
Aeronautic & Aerospace Engineering
This new edition features two new chapters on composite fittings and the design of a composite panel, as well as additional exercises. It enables students and engineers to generate meaningful and robust designs of complex composite structures. It provides a link between theory and day-to-day design practice, using theory to derive solutions that are applicable to specific structures and structural details used in the industry.
Starting with the basic mathematical derivation followed by simplifications used in real-world design, it presents the level of accuracy and range of applicability of each method, along with design guidelines derived from experience combined with analysis. The author solves in detail examples taken from actual applications to show how the concepts can be applied, solving the same design problem with different methods based on different drivers (e.g. cost or weight) to show how the final configuration changes as the requirements and approach change. Each chapter is followed by exercises that represent specific design problems often encountered in the aerospace industry but which are also applicable in the in the automotive, marine, and construction industries.
• Updated to include additional exercises, that represent real design problems..
• Provides solutions that can be used in optimization schemes without having to run finite element models at each iteration; thus speeding up the design process and allowing the examination of many more alternatives than traditional approaches.
• Supported by a complete set of lecture slides and solutions to the exercises hosted on a companion website for instructors.
Engineers and graduate students.
Christos Kassapoglou, Associate Professor of Aerospace Structures, Delft University of Technology, is a consultant structural analyst specializing in composite materials. Prior to joining Delft, he was a programme manager and principal investigator for Sikorsky Aircraft.
Advanced Aircraft Design: Conceptual Design, Technology and Optimization of Subsonic Civil Airplanes
Egbert Torenbeek
978-1-118-56811-8 / 1-118-56811-7
432 pp. Pub: 14/06/13
Aeronautic & Aerospace Engineering
Demonstrates the basic principles of advanced civil airplane design.
This book comprehensively covers the advanced design of conventional and advanced civil aircraft. The book is intended primarily to support designers and researchers in understanding the complex relationships between effects on airplane characteristics of varying design parameters, and may also be useful to validate design synthesis and optimization programs. Moreover, the simplicity of analytical criteria can be useful to quickly estimate the effect of introducing different technologies for propulsion and airframe design. Topics covered include initial sizing, weight engineering, aerodynamic and propulsive efficiency and optimization, with emphasis on the overall airplane system and technology. There are also chapters on advanced wing design and on unified cruise performance for high speed (transonic) aircraft.
• Comprehensively treats subsonic commercial transport airplanes and business jets.
• Develops a unique quasi-analytical framework for conceptual design optimization.
• Emphasizes weight engineering as a central discipline.
• Discusses unusual design concepts.
• Authored by one of the leaders in the field of aircraft design.
Researchers and practitioners in aerospace industry (aircraft designers, aircraft weight engineers and applied scientists). Graduate students in aerospace engineering.
Egbert Torenbeek, Professor Emeritus of Aircraft Design, Delft University of Technology, became responsible for teaching the Aircraft Preliminary Design course at the department of Aerospace Engineering in 1964. After a sabbatical at Lockheed Georgia Company, he became a senior lecturer and full professor of the Aircraft Design chair at TU Delft, initiating research and teaching in computer-assisted aircraft design.
M e c h a n i c a l E n g i n e e r i n g 2 9 W I L E Y
Theoretical Aerodynamics
Ethirajan Rathakrishnan
978-1-118-47934-6 / 1-118-47934-3
560 pp. Pub: 08/07/13
Aeronautic & Aerospace Engineering
This book is designed to serve as a user friendly text for a full course on theoretical aerodynamics. The material is covered in such a way that the theory of aerofoil, its design features and performance aspects are introduced systematically, beginning with the basics required, and then gradually proceeding to higher level. The mathematics involved is presented in such a manner that it can be followed comfortably by even those who are not strong in mathematics. The examples are designed to fix the theory studied in an effective manner. Throughout the book, the physics behind the process is clearly explained.
Each chapter begins with an introduction and ends with a summary and exercises.
• Provides a complete overview of the technical terms, vortex theory, lifting line theory, and numerical methods.
• Presented in an easy to read style making full use of figures and illustrations to enhance understanding, and moves well from simpler to more advanced topics.
• Includes a complete section on fluid mechanics and thermodynamics, essential background topics to the theory of aerodynamics.
• Blends the mathematical and physical concepts of design and performance aspects of lift surfaces, and introduces the reader to the thin aerofoil theory; panel method and finite aerofoil theory.
• Includes a Solutions Manual for the exercise problems at the end of chapters, and Lecture slides on the book's Companion Website.
Graduate and advanced undergraduate students of Aerospace Engineering. Researchers and Designers working in the area of aerofoil and blade design.
Ethirajan Rathakrishnan, Professor, Department of Aerospace Engineering, Indian Institute of Technology Kanpur, India, is the founder of the High Speed Jet Laboratory at IIT Kanpur, with facilities to carry out research on aerodynamic and aeroacoustic characteristics of jets. His research interests include Fluid Mechanics, Gas Dynamics, Applied Gas Dynamics, Aerodynamics, and Experimental Techniques in Fluid Mechanics. He has published books, contributed to numerous journals articles and conference proceedings, and been the recipient of many awards for his research both at home and internationally. Professor Rathakrishnan is currently Editor-In-Chief of the International Review of Aerospace Engineering Journal.
Automotive
Battery Systems Engineering
Christopher D. Rahn, Chao-Yang Wang
978-1-119-97950-0 / 1-119-97950-1
256 pp. Pub: 01/02/13
Motors & Drivers
Focusing on the interdisciplinary area of battery systems engineering, this book provides the background, models, solution techniques, and systems theory that are necessary for the development of advanced battery management systems. It covers the topic from the perspective of basic electrochemistry as well as systems engineering topics and provides a basis for battery modeling for system engineering of electric and hybrid electric vehicle platforms.
This original approach gives a useful overview for systems engineers in chemical, mechanical, electrical, or aerospace engineering who are interested in learning more about batteries and how to use them effectively. Chemists, material scientists, and mathematical modelers can also benefit from this book by learning how their expertise affects battery management.
• Approaches a topic which has experienced phenomenal growth in recent years.
• Topics covered include: Electrochemistry; Governing Equations; Discretization Methods; System Response and Battery Management Systems.
• Include tables, illustrations, photographs, graphs, worked examples, homework problems, and references, to thoroughly illustrate key material.
Scientists and Engineers working in the battery or electric vehicle industries, Graduate students in mechanical engineering, electrical engineering, chemical engineering.
Professor Rahn, Professor of Mechanical Engineering, Department of Mechanical & Nuclear Engineering, Pennsylvania State University, has published broadly in international journals as well as writing a book in 2001. Professor Wang, Distinguished Professor of Mechanical Engineering, as well as Director of the Electrochemical Engine Center (ECEC), Pennsylvania State University, is the recipient of many awards and honors in Nuclear Energy and Chemistry as well as a member of The Minerals, Metals & Materials Society (TMS), and Fellow of American Society of Mechanical Engineers.
M e c h a n i c a l E n g i n e e r i n g 3 0 W I L E Y
Engineering Management Tools for Collaborative Decision-Making
Pascale Zaraté
978-1-84821-516-0 / 1-84821-516-9
128 pp. Pub: 06/02/13
Capability & Resource Management
Decision-making has evolved recently thanks to the introduction of information and communication technologies in many organizations, which has led to new kinds of decision-making processes called "collaborative decision-making", at the organizational and cognitive levels.
This book looks at the development of the decision-making process in organizations. Decision-aiding and its paradigm of problem solving are defined, showing how decision-makers now need to work in a cooperative way.
Definitions of cooperation and associated concepts such as collaboration and coordination are given, and a framework of co-operative decision support systems is presented, including intelligent DSS, cooperative knowledge-based systems, workflow, group support systems, collaborative engineering, integrating with a collaborative decision-making model in part or being part of global projects.
Several models and experimental studies are also included, showing that these new processes have to be supported by new types of tools. Several of these are described in order to calculate or simulate solutions or global solutions for decision-making modification. Definitions and new trends for these models are given, along with types of systems.
Scientists, researchers and industrial engineers interested in this subject area.
Pascale Zaraté is a Professor at Toulouse 1 Capitole University, France.
Computational / Numerical Methods
Multiscale Simulations and Mechanics of Biological Materials
Shaofan Li, Dong Qian
978-1-118-35079-9 / 1-118-35079-0
488 pp. Pub: 05/04/13
Computational / Numerical Methods
A compilation of recent developments in multiscale simulation and computational biomaterials written by leading specialists in the field.
• Offers a unique interdisciplinary approach to multiscale biomaterial modelling aimed at both accessible introductory and advanced levels.
• Presents a breadth of computational approaches for modelling biological materials across multiple length scales (molecular to whole-tissue scale), including solid and fluid based approaches.
• Contributors are some of the most active researchers in multiscale simulations in the world.
• Companion website for supplementary materials, including computational simulations and the latest nanotechnology experiments; plus links to contributors' websites.
Graduates, post-doctoral researchers, professors and researchers. Industry professionals and researchers working in materials science and biological chemistry.
Shaofan Li, Professor of Applied & Computational Mechanics, Department of Civil & Environmental Engineering, University of California, Berkeley, USA, is the author of numerous articles and conference proceedings. Dong Qian, Associate Professor of Mechanical Engineering and Director of Graduate Study, Mechanical Engineering Program, University of Cincinnati, USA. He is a member of the US association for computational mechanics and ASME. He has published over 40 journal papers and book chapters. His research interests include nano-scale modeling, simulation and applications, meshfree methods, and development of multi-scale methods in solid mechanics
M e c h a n i c a l E n g i n e e r i n g 3 1 W I L E Y
Computational Fluid-Structure Interaction: Methods and Applications
Yuri Bazilevs, Kenji Takizawa, Tayfun E. Tezduyar
978-0-470-97877-1 / 0-470-97877-5
404 pp. Pub: 11/01/13
Computational / Numerical Methods
The first book to present state-of-the-art CFSI research: it takes the reader from the fundamentals of computational fluid and solid mechanics to latest computational FSI methods, special FSI techniques, and solution of real-world problems. Leading experts in the field present the material using a unique approach that combines advanced methods, special techniques, and challenging applications.
This book begins with the differential equations governing the fluid and solid mechanics, coupling conditions at the fluid-solid interface and the basics of the finite element method. It continues with the ALE and space-time FSI methods, spatial discretization and time integration strategies for the coupled FSI equations, solution techniques for the fully-discretized coupled equations, and advanced FSI and space-time methods. It ends with special FSI techniques targeting cardiovascular FSI, parachute FSI, and wind-turbine aerodynamics and FSI.
• Covers modern computational mechanics techniques, including stabilized, variational multiscale, and space--time methods, isogeometric analysis, and advanced FSI coupling methods.
• Is in full color, with diagrams illustrating the fundamental concepts and advanced methods, with insightful visualization illustrating the complexities of the problems that can be solved with the FSI methods covered in the book.
Researchers, academics and graduate students specializing in computational methods. Professionals working in engineering firms, and specializing in computational mechanics
Dr. Yuri Bazilevs, Associate Professor, Dept of Structural Engineering, University of California, has published over 60 journal papers on computational fluid and structural mechanics and computational FSI. Dr. Kenji Takizawa, Associate Professor, Dept of Modern Mechanical Engineering and Waseda Institute for Advanced Study at Waseda University, Tokyo. Dr. Tayfun Tezduyar, Professor, Mechanical Engineering, Rice University, Houston.
Non Smooth Deterministic or Stochastic Discrete Dynamical Systems: Applications to Models with Friction or Impact
Jerome Bastien, Frederic Bernardin, Claude-Henri Lamarque
978-1-84821-525-2 / 1-84821-525-8
512 pp. Pub: 20/02/13
Computational / Numerical Methods
This book is especially suited for people both in research and industry who are interested in the modeling and numerical simulation of discrete mechanical systems with friction and impact phenomena occurring in presence of classical (linear elastic) or non-classical constitutive laws (delay, memory effects, etc.).
Such systems can be found in various fields of technical application in mechanics, civil engineering, mechanical engineering, etc.; as contacts between wheels and ground in vehicle dynamics, devices in motors, machines, simplified models of buildings with non-smooth constitutive laws, walking machines, limit stops and friction in arbitrary kind of mechanisms or contacts.
The book intends to close the gap between highly specialized mathematical literature and engineering application, and to also give tools in the framework of non- smooth stochastic differential systems: so applications involving stochastic excitations (seisms, road surface, wind models etc.) are concerned.
Many other fields of research (physics, materials, electronics, etc.) could be interested to model some phenomena (for example hysteretic ones) by using the mathematical tools provided by this book.
Claude-Henri Lamarque, Head of LGCB, Professor ENTPE, Vaulx-en-Velin, France. Jerome Bastien, Assistant Professor, University Lyon 1, Lyon, France. Frederic Bernardin, Research Engineer at CETE de Lyon (DLCF), Lyon, France
M e c h a n i c a l E n g i n e e r i n g 3 2 W I L E Y
Computer Science
Memory Allocation Problems in Embedded Systems: Optimization Methods
Maria Soto, Marc Sevaux, André Rossi, Johann Laurent
978-1-84821-428-6 / 1-84821-428-6
208 pp. Pub: 14/12/12
Computer Hardware
Embedded systems are everywhere in contemporary life and are supposed to make our lives more comfortable. In industry, embedded systems are used to manage and control complex systems (e.g. nuclear power plants, telecommunications and flight control) and they are also taking an important place in our daily activities (e.g. smartphones, security alarms and traffic lights).
In the design of embedded systems, memory allocation and data assignment are among the main challenges that electronic designers have to face. In fact, they impact heavily on the main cost metrics (power consumption, performance and area) in electronic devices. Thus designers of embedded systems have to pay careful attention in order to minimize memory requirements, consequently improving memory throughput and limiting the power consumption by the system's memory. Electronic designers attempt to minimize memory requirements with the aim of lowering the overall system costs.
A state of the art of optimization techniques for memory management and data assignment is presented in this book.
Scientists, researchers and industrial engineers interested in this subject area
Computer Science and Ambient Intelligence
Gaelle Calvary, Thierry Delot, Florence Sedes, Jean-Yves Tigli
978-1-84821-437-8 / 1-84821-437-5
352 pp. Pub: 18/12/12
Computer Science
This book focuses on ambient intelligence and addresses various issues related to data management, networking and HCI in this context. Taking a holistic view, it covers various levels of abstraction, ranging from fundamental to advanced concepts and brings together the contributions of various specialists in the field.
Moreover, the book covers the key areas of computer science concerned with the emergence of ambient intelligence (e.g. interaction, middleware, networks, information systems, etc.). It even goes slightly beyond the borders of computer science with contributions related to smart materials and ethics. The authors cover a broad spectrum, with some chapters dedicated to the presentation of basic concepts and others focusing on emerging applications in various fields such as health, transport and tourism.
Scientists, researchers and industrial engineers interested in this subject area
Gaelle Calvary is Professor in Computer Science at the Ensimag software engineering school of the Grenoble Institute of Technology, Grenoble, France. Thierry Delot is Associate professor, University of Valenciennes, France. Florence Sedes is Professor, Universite Paul Sabatier, Toulouse, France. Jean-Yves Tigli is Associate professor, University of Nice Sophia Antipolis - France
M e c h a n i c a l E n g i n e e r i n g 3 3 W I L E Y
Fluid Mechanics
The Stochastic Perturbation Method for Computational Mechanics
Marcin Kaminski
978-0-470-77082-5 / 0-470-77082-1
352 pp. Pub: 18/01/13
Fluid Mechanics
Probabilistic analysis is increasing in popularity and importance within engineering and the applied sciences. However, the stochastic perturbation technique is a fairly recent development and therefore remains as yet unknown to many students, researchers and engineers. Fields in which the methodology can be applied are widespread, including various branches of engineering, heat transfer and statistical mechanics, reliability assessment and also financial investments or economical prognosis in analytical and computational contexts.
The Stochastic Perturbation Method for Computational Mechanics is devoted to the theoretical aspects and computational implementation of the generalized stochastic perturbation technique. It is based on any order Taylor expansions of random variables and enables for determination of up to fourth order probabilistic moments and characteristics of the physical system response.
• Provides a grounding in the basic elements of statistics and probability and reliability engineering.
• Describes the Stochastic Finite, Boundary Element and Finite Difference Methods, formulated according to the perturbation method.
• Demonstrates dual computational implementation of the perturbation method with the use of Direct Differentiation Method and the Response Function Method.
• Website with supporting stochastic numerical software.
• Covers the computational implementation of the homogenization method for periodic composites with random and stochastic material properties.
• Case studies and numerical examples.
Postgraduate students in engineering. Researchers in engineering and applied sciences, R&D practitioners. Professional engineers.
Marcin Kaminski, Professor, Faculty of Civil Engineering, Architecture & Environmental Engineering, Technical University of Lodz, Poland. He has published a monograph with Springer, and he has authored over 150 research papers.
Analysis and Modelling of Non-Steady Flow in Pipe and Channel Networks
Vinko Jovic
978-1-118-53214-0 / 1-118-53214-7
552 pp. Pub: 10/05/13
Fluid Mechanics
Presents the theory and practice of modelling different flows in hydraulic networks.
• Has a systematic approach and addresses the topic from the fundamentals.
• Presents numerical solutions based on the finite element technique.
• Accompanied by a website containing the Simpip program.
Engineers and practitioners in civil, mechanical and environmental engineering. Graduate students in civil, mechanical and environmental engineering.
Vinko Jovic is a Professor and the Head of Department for Hydraulics and Hydromechanics in the Faculty of Civil Engineering at the University of Split. His research interests also include numerical modelling. He has circa 60 published papers and has written two books in Croatian. He is the creator of a software package called Simpip (an abbreviation of simulation of pipe flow) which is used for solving non-steady pipe flow using the finite element method.
M e c h a n i c a l E n g i n e e r i n g 3 4 W I L E Y
Mechanical & Industrial Engineering
The PDMA Handbook of New Product Development
Kenneth B. Kahn
978-0-470-64820-9 / 0-470-64820-1
504 pp. Pub: 31/01/13
Industrial Engineering / Manufacturing
The "bible" of new product development containing the "PDMA's Body of Knowledge", updated with the latest information from the Product Development and Management Association.
Contains the entire PDMA "Body of Knowledge" needed for passing the professional certification exam.
Planned 50% new and updated material covering subjects such as virtual product development, globalization, and benchmarking.
Product development professionals including engineers, project managers and business managers in a broad range of industries from heavy manufacturing to the service sector. Plus members of the PDMA and those training for the PDMA Professional Certification Examination using the body of knowledge.
Kenneth B. Kahn, is Professor and Director of the daVinci Center for Innovation at Virginia Commonwealth University.
Making Effective Business Decisions Using Microsoft Project
Advisicon, Tim Runcie, Doc Dochtermann
978-1-118-09739-7 / 1-118-09739-4
384 pp. Pub: 06/02/13
Industrial Engineering / Project Management
A guide to Microsoft Project that focuses on developing a successful project management strategy across the organization to drive better decisions.
• Guide to managing work using Microsoft Project 2010 from the PMO to the individual project manager.
• Focus on using Microsoft Project 2010 to integrate and support overall organizational strategies.
• Loaded with graphics, screen shots, and annotations that will make this the most accessible and usable book available on the subject
The estimated 6 million project managers and others who use Microsoft Project. Specific market segments include: 1) the 300,000 members of PMI, 2) PMI's "REPs" (such as Advisicon) and other training businesses that teach courses on project management using Microsoft Project. It is projected that over 80% of all companies use Microsoft Project at some level within their organization.
Advisicon is a consulting firm that delivers strategic project control solutions using advanced project and portfolio management methodologies, custom application development and consultative training. Their clients throughout North America and Latin America have realized quantifiable results through a unique approach of combining knowledge transfer, optimization and sustainability of processes and technology while increasing stakeholder competencies. Advisicon's team of professionals includes PMI certified Project Management Professionals® (PMPs), Microsoft Certified Professionals® (with specializations in Enterprise Project Management, Networking and Infrastructure Solutions), and Microsoft MVPs.
M e c h a n i c a l E n g i n e e r i n g 3 5 W I L E Y
Project Management: A Systems Approach to Planning, Scheduling, and Controlling, 11e
Harold Kerzner
978-1-118-02227-6 / 1-118-02227-0
1296 pp. Pub: 06/03/13
Industrial Engineering / Project Management
The eleventh edition of the best-selling text for students and professionals aligned with PMI's latest release of the PMBOK Guide.
• New material has been added to this edition on measuring project management ROI, value to the organization, and to customers
• Revised and updated material for training and PMP exam prep use including expanded problems and exercises.
• Supplemented by an expanded website which includes sections for instructors (both academic use and corporate trainers), students, and project managers on the job.
Students in project management including undergraduate, graduate courses; professionals, consultants and trainers. There is also a large market of student and professionals self-training for the PMP Exam.
Harold Kerzner is Senior Executive Director for Project, Program and Portfolio Management at International Institute of Learning, Inc. (IIL) -- a global learning solutions company offering professional training and consulting services worldwide. Dr. Kerzner's profound effect on the project management industry inspired IIL to establish the Kerzner International Project Manager of the Year„¢ Award, which is presented to a distinguished PMP® or global equivalent each year. More recently, IIL donated $1 mil. to the Project Management Institute Educational Foundation (PMIEF) to establish the Dr. Harold Kerzner Scholarship Fund. To learn more about Dr. Kerzner's "Achieving PM Excellence" courses as well as his podcast series, visit www.IIL.com.
Project Management: Case Studies
Harold Kerzner
978-1-118-02228-3 / 1-118-02228-9
704 pp. Pub: 27/02/13
Industrial Engineering / Project Management
New edition of the most popular book of project management case studies now including more than 100 cases plus a "super case" on the Iridium Project.
• Contains over 100 cases drawn from real companies illustrating successful and poor implementation of project management.
• Covering broad areas of project management plus construction and international project management and contains a "super case" covering all aspects of project management.
Students in courses on project management at 1) the undergraduate level (in business or engineering schools) or at the graduate level (in MBA or graduate engineering curriculums), 2) proprietary business schools, and 3) consulting and training companies such as the International Institute for Learning (IIL) who do short courses for returning professionals.
Harold Kerzner is Senior Executive Director for Project, Program and Portfolio Management at International Institute of Learning, Inc. (IIL) -- a global learning solutions company offering professional training and consulting services worldwide. Dr. Kerzner's profound effect on the project management industry inspired IIL to establish the Kerzner International Project Manager of the Year„¢ Award, which is presented to a distinguished PMP® or global equivalent each year. More recently, IIL donated $1 mil. to the Project Management Institute Educational Foundation (PMIEF) to establish the Dr. Harold Kerzner Scholarship Fund.
M e c h a n i c a l E n g i n e e r i n g 3 6 W I L E Y
A User's Manual to the PMBOK Guide
Cynthia Snyder
978-1-118-43107-8 / 1-118-43107-3
320 pp. Pub: 13/02/13
Industrial Engineering / Project Management
Revision of an accessible manual that walks the reader through the new 5
th edition of the PMBOK Guide, explains
what it is saying, and how to use its information on a day-to-day basis.
Co-branded and approved by the Project Management Institute (PMI).
Written by successful author, Cynthia Snyder who was the project manager of the PMBOK Guide - Fourth Edition.
Clearly written and accessible to allow true understanding and implementation of the PMBOK Guide standard.
Follows the new fifth edition of the PMBOK Guide beginning with the process definition, then a description of the intent of the process, followed by a discussion of the individual ITTOs (inputs, tools and techniques and outputs).
All project managers and those studying for the PMP and CAPM Certification Exam. Including: 1) the 400,000 members of the PMI, 2) training businesses (including PMI's REPS) that teach courses on project management or PMP/CAPM Exam prep, 3) college courses in project management at the under grad and grad level and short courses offered for exam prep.
Cynthia Snyder who published under her married name, Stackpole for our last edition, is a well-known project management consultant and acted the Project Manager for the team that created PMI's PMBOK, 4E.
A Project Manager's Book of Forms: A Companion to the PMBOK Guide, 2e
Cynthia Snyder
978-1-118-43078-1 / 1-118-43078-6
240 pp. Pub: 13/02/13
Industrial Engineering / Project Management
Second edition of a very successful source book of forms coupled with the procedures for using them that follows the latest fifth edition of PMI's PMBOK® Guide.
The only book of forms that exactly follows the content of the PMBOK Guide 5e, including new areas added for this edition.
Provides a "road-map" approach so readers know exactly where they are and what forms precede and follow their current position on a project.
The book contains forms in hard copy for reproduction as well as in an accompanying CD for direct use and customization by readers.
The market is made up of those individuals in a formal project management role (project manager, program manager, project/program office, trainer) who are responsible for creating, using and understanding the flow of documents that support the project at hand; those sitting for the PMP/CAPM Certification Exam, as well as those who train individuals for the exam. Others who practice project management (whether they are PMI certified or not) individually, or in teams, or who work as consultants to the industry around the world.
Cynthia Snyder, Project Management Consultant, Idyllwild, CA, who published under her married name, Stackpole for our last edition, is a well-known project management consultant and acted the Project Manager for the team that created PMI's PMBOK, 4E.
M e c h a n i c a l E n g i n e e r i n g 3 7 W I L E Y
Intelligent Non-hierarchical Manufacturing Networks
Raul Poler, Luis Maia Carneiro, Thomas Jasinski, Marc Zolghadri, Paolo Pedrazzoli
978-1-84821-481-1 / 1-84821-481-2
448 pp. Pub: 18/12/12
Industrial Engineering
This book provides the latest models, methods and guidelines for networked enterprises to enhance their competitiveness and move towards innovative high performance and agile industrial systems.
In the new global market, competitiveness and economic growth rely greatly on the move toward innovative high performance industrial systems and agile networked enterprises through the creation and consolidation of non-hierarchical manufacturing networks of multi-national SMEs as opposed to networks based on powerful large-scale companies. Network performance can be significantly improved through more harmonious and equitable peer-to-peer inter-enterprise relationships, conforming decentralized and collaborative decision-making models.
Traditional hierarchical manufacturing networks are based on centralized models, where some of the actors involved must adapt themselves to the constraints defined by those who are most dominant. Real-world experiences of such models have revealed some major problems due to the centralized vision of the supply chain and the sub-optimal performance of centralized decision-making. For the current highly dynamic markets, this generates major inefficiencies in operation throughout the supply chain.
This book collects the latest research regarding non-hierarchical manufacturing networks and provides enterprises with valuable models, methods and guidelines to improve their competitiveness.
Professional and researchers.
Raul Poler Professor. Director of the Research Centre on Production Management and Engineering.Polytechnic University of Valencia, Spain. Luis Carneiro Unit Manager. INESc, Manufacturing Systems Engeneering Unit.,Porto, Portugal. Thomas Jasinski Senior Research Associate. Laboratory of Machine Tools and Production Engineering, (WZL). RWTH Aachen University, Germany. Marc Zolghadri Associate Professor, IMS-Bordeaux Labs,Bordeaux University, France. Paolo Pedrazzoli Professor. Head of the Sustainable Production Systems Lab University of Applied Sciences and Arts of Southern Switzerland, Switzerland.
Handbook of Compliant Mechanisms
Larry L. Howell, Spencer P. Magleby, Brian M. Olsen
978-1-119-95345-6 / 1-119-95345-6
344 pp. Pub: 22/02/13
Mechanical Engineering - Design
A broad compilation of compliant mechanisms to give inspiration and guidance to those interested in using these in their designs, which includes graphics and descriptions of many compliant mechanisms. It comprises an extensive categorization of devices that can be used to help readers identify compliant mechanisms related to their application. It also provides chapters on the basic background in compliant mechanisms, the categories of compliant mechanisms, and an example of how the Compendium can be used to facilitate compliant mechanism design.
• Fully illustrated throughout to be easily understood and accessible at introductory levels.
• Covers all aspects pertaining to classification, elements, mechanisms and applications of compliant mechanisms.
• Summarizes a vast body of knowledge in easily understood diagrams and explanations.
Intended as an introduction to the area, the Handbook avoids technical jargon to assist non engineers involved in product design, inventors and engineers in finding clever solutions to problems of design and function.
Mechanical engineers, Product designers, Inventors. Students on courses in compliant mechanisms, University libraries and technical libraries in large companies
Larry L. Howell is a professor and past chair of the Department of Mechanical Engineering at Brigham Young University (BYU). He is the author of Compliant Mechanisms, which was published by John Wiley & Sons in 2001. He is also the author of two articles in trade magazines, five chapters in edited books, and over one hundred technical publications in academic journals and proceedings. Professor Magleby began at BYU in 1989 after 6 years in the military aircraft industry developing tools for advanced aircraft design and manufacture, concurrent engineering methods, and interdisciplinary design teams. He is the author of many engineering articles in journals and proceedings. His work has an emphasis in product design, compliant mechanism design, and engineering education. Brian M. Olsen, Los Alamos National Laboratory, USA Dr Olsen is currently a graduate student at BYU, and will shortly begin working as an engineer at Los Alamos National Laboratory
M e c h a n i c a l E n g i n e e r i n g 3 8 W I L E Y
Nano and Cell Mechanics: Fundamentals and Frontiers
Horacio D. Espinosa, Gang Bao
978-1-118-46039-9 / 1-118-46039-1
506 pp. Pub: 11/01/13
Solid Mechanics
Research in nano and cell mechanics has received much attention from the scientific community as a result of society needs and government initiatives to accelerate developments in materials, manufacturing, electronics, medicine and healthcare, energy, and the environment. Engineers and scientists are currently engaging in increasingly complex scientific problems that require interdisciplinary approaches. In this regard, studies in this field draw from fundamentals in atomistic scale phenomena, biology, statistical and continuum mechanics, and multiscale modeling and experimentation. As a result, contributions in these areas are spread over a large number of specialized journals, which prompted the Editors to assemble this book.
This book brings together many of the new developments in the field for the first time, and covers fundamentals and frontiers in mechanics to accelerate developments in nano- and bio-technologies.
• Covers experimental, analytical, and computational tools used to investigate biological and nanoscale phenomena.
• Covers fundamentals and frontiers in mechanics to accelerate developments in nano- and bio-technologies.
• Presents multiscale-multiphysics modeling and experimentation techniques.
• Examines applications in materials, manufacturing, electronics, medicine and healthcare.
Researchers in area of nano mechanics, graduate and post graduate students. Undergraduate students.
Horacio D. Espinosa, Professor of Mechanical Engineering, Northwestern University, is a member of the European Academy of Arts & Sciences, and Fellow of AAM, ASME, and SEM. He served as Editor-in-chief of the Journal of Experimental Mechanics and Associate Editor of the Journal of Applied Mechanics. Currently, he is a co-editor of the Wiley Book Series in Micro and Nanotechnologies and serves in several journal editorial boards. Gang Bao, Professor of Bioengineering, Georgia Institute of Technology, USA.
Geometry of Surfaces: A Practical Guide for Mechanical Engineers
Stephen P. Radzevich
978-1-118-52031-4 / 1-118-52031-9
264 pp. Pub: 25/01/13
Solid Mechanics
Presents an in-depth analysis of geometry of part surfaces and provides the tools for solving complex engineering problems.
Geometry of Surfaces: A Practical Guide for Mechanical Engineers is a comprehensive guide to applied geometry of surfaces with focus on practical applications in various areas of mechanical engineering. The book is divided into three parts on Part Surfaces, Geometry of Contact of Part Surfaces and Mapping of the Contacting Part Surfaces.
Geometry of Surfaces: A Practical Guide for Mechanical Engineers combines differential geometry and gearing theory and presents new developments in the elementary theory of enveloping surfaces. Written by a leading expert of the field, this book also provides the reader with the tools for solving complex engineering problems in the field of mechanical engineering.
• Presents an in-depth analysis of geometry of part surfaces.
• Provides tools for solving complex engineering problems in the field of mechanical engineering.
• Combines differential geometry and gearing theory.
• Highlights new developments in the elementary theory of enveloping surfaces.
Researchers and practitioners in mechanical, automotive and aerospace engineering industries. CAD developers. Graduate students in mechanical engineering.
Dr. Stephen P. Radzevich is a Professor of Mechanical and Manufacturing Engineering, and has extensive industrial experience in gear design and manufacture. His main research interest is kinematic geometry of surface generation. Dr. Radzevich has spent over 35 years developing software, hardware and other processes for gear design and optimization. He also trains engineering students at universities and gear engineers in companies. He has authored and co-authored over 30 monographs, handbooks, and textbooks, and holds over 150 patents on inventions in the field.
M e c h a n i c a l E n g i n e e r i n g 3 9 W I L E Y
Numerical Calculation of Lubrication: Methods and Programs
Ping Huang
978-1-118-45119-9 / 1-118-45119-8
450 pp. Pub: 24/06/13
Computational / Numerical Methods
This title is focused on basic lubrication problems and offers specific engineering applications. The book is divided into four parts. The first part is Reynolds equation solution, which includes solutions of Reynolds equations with the different conditions and the discrete forms, such as the steady-state incompressible slider, journal bearing, dynamic bearing, gas bearing and grease lubrication. The second part is energy equation solution. The form of the discrete energy equations and the temperature-viscosity equations are given first. Then, thermal fluid lubrication problems are solved, combined with the Reynolds and the energy equation. In elastohydrodynamic lubrication, the elastic deformation equations are given first. Then, the pressure-viscosity and temperature-viscosity equation are also introduced. Then the joint solution methods and programs combined with the Reynolds equation and the elastic deformation equation are introduced. The programs include the isothermal and thermal elastohydrodynamic lubrications and grease elastohydrodynamic lubrication. In the final part, the lubrication programs include the herringbone groove bearing lubrication of micro motor and its optimization design, the super thin gas film lubrication for the magnetic hard disk/head and its steady-state design.
• Offers a clear introduction and orientation to all major engineering lubrication problems and their solutions.
• Presents numerical programs for specific applications in engineering, with special topics including grease lubricated bearings and gas bearings.
• Equips those working in tribology and those new to the topic with the fundamental tools of calculation.
Postgraduate students; engineers. Senior undergraduates.
Ping Huang, Professor, School of Mechanical and Automotive Engineering, South China University of Technology, has over 200 articles published in the scientific public domain. He is the author (co-author) of four books (including a Wiley title); he is also the owner of four patents. Currently his research interests include: MEMS, nano-tribology, thin film lubrication,etc.
Handbook of Compliant Mechanisms
Larry L. Howell, Spencer P. Magleby, Brian M. Olsen
978-1-119-95345-6 / 1-119-95345-6
344 pp. Pub: 04/22/13
Mechanical Engineering - Design
A broad compilation of compliant mechanisms to give inspiration and guidance to those interested in using compliant mechanisms in their designs, this book includes graphics and descriptions of many compliant mechanisms. It comprises an extensive categorisation of devices that can be used to help readers identify compliant mechanisms related to their application. It also provides chapters on the basic background in compliant mechanisms, the categories of compliant mechanisms, and an example of how it can be used to facilitate compliant mechanism design.
Fully illustrated throughout to be easily understood and accessible at introductory levels, it also covers all aspects pertaining to classification, elements, mechanisms and applications of compliant mechanisms.
• Summarises a vast body of knowledge in easily understood diagrams and explanations.
• Helps readers appreciate the advantages that compliant mechanisms have to offer.
• Practical approach is ideal for potential practitioners who would like to realise designs with compliant mechanisms, members and elements.
• Breadth of topics covered also makes the book a useful reference for more advanced readers.
Mechanical engineers, Product designers, Inventors. Students on courses in compliant mechanisms, University libraries and technical libraries in large companies
Larry L. Howell, Professor/past Chair, Dept of Mechanical Engineering, Brigham Young University, is the author of Compliant Mechanisms (Wiley 2001). He is also the author of two articles in trade magazines, five chapters in edited books, and over one hundred technical publications in academic journals and proceedings. Professor Spencer Magleby is author of many engineering articles in journals and proceedings. His work has an emphasis in product design, compliant mechanism design, and engineering education. Brian M. Olsen, Los Alamos National Laboratory.
M e c h a n i c a l E n g i n e e r i n g 4 0 W I L E Y
Vibro-impact Dynamics
Albert C. J. Luo, Yu Guo
978-1-118-35945-7 / 1-118-35945-3
272 pp. Pub: 03/18/13
Solid Mechanics
Presents a systematic view of vibro-impact dynamics based on the nonlinear dynamics analysis.
Comprehensive understanding of any vibro-impact system is critically impeded by the lack of analytical tools viable for properly characterising grazing bifurcation. The authors establish vibro-impact dynamics as a subset of the theory of discontinuous systems, thus enabling all vibro-impact systems to be explored and characterised for applications.
Vibro-impact Dynamics presents an original theoretical way of analysing the behavior of vibro-impact dynamics that can be extended to discontinuous dynamics. All topics are logically integrated to allow for vibro-impact dynamics, the central theme, to be presented. It provides a unified treatment on the topic with a sound theoretical base that is applicable to both continuous and discrete systems.
• Presents mapping dynamics to determine bifurcation and chaos in vibro-impact systems.
• Offers two simple vibro-impact systems with comprehensive physical interpretation of complex motions.
• Uses the theory for discontinuous dynamical systems on time-varying domains, to investigate the Fermi-oscillator.
Graduate students, university professors, researchers and scientists in mechanical engineering. Engineers and graduate students in mathematics and physics.
Professor Luo is the author of numerous books, journal articles and conference proceedings. His teaching interests include advanced dynamics, dynamics of machinery, advanced stress analysis and dynamic system modeling. Professor Luo is presently a Member of the Advisory Panel for the PhD School, Universita degli Studi di Modena E Reggio Emilia, Italy. Yu Guo, Graduate Teaching Assistant Assistant, Southern Illinois University, lectures on Numerical Simulation, and Fluid Mechanics, and has five years' experience in vibration and fatigue testing using MTS devices. He specialises in C/C++ and Fortran programming
Reconstructing Project Management
Peter W. G. Morris
978-0-470-65907-6 / 0-470-65907-6
344 pp. Pub: 12/04/13
Project Management
A hugely informative analysis and wide-ranging commentary on the management of projects, designed for practitioners and scholars, building lessons from the book's history of the discipline's development, offering extensive commentary on its practices and theoretical underpinnings, and concluding with proposals to improve its value and relevancy.
The book is designed to offer a thoughtful commentary on project management as it has been practiced and taught over the last 60 or more years, and as it may be over the next 20 to 40, drawing on examples from several industry sectors. Its thesis is that ‘it all depends on how you define the subject’ -- that much of our present thinking about PM as traditionally defined is boring, sometimes conceptually weak or even flawed, and/or of limited application, whereas in reality what it can offer is exciting, challenging and potentially enormously useful. The book explores this hypothesis drawing on leading scholarship and practitioner perceptions.
Section 1 sets the scene -- the purpose and context of the book. Section 2 covers the origins of modern project management and the limitations of the traditional project management model. Section 3 dissects many of the challenges still facing project management, in doing so it examines many of the more difficult, interesting and intractable issues in the discipline today. Section 4 focuses on opportunities open to the discipline in the (increasingly challenging) years ahead.
• Precise, considered and reflective.
• Grounded in research but speaks to both academics and practitioners.
• A seminal work from project management's pre-eminent academic.
Project management academics. Thoughtful practitioners. Postgraduate students world-wide.
Peter Morris, Professor of Construction and Project Management, University College London (UCL), is well published. He is a past Chairman of the Association for Project Management (APM) and Deputy Chairman of the International Project Management Association (IPMA).
M e c h a n i c a l E n g i n e e r i n g 4 1 W I L E Y
Tribology
Grease Lubrication in Rolling Bearings
Piet M. Lugt
978-1-118-35391-2 / 1-118-35391-9
472 pp. Pub: 11/02/13
Tribology
Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings.
The first part of the book covers grease composition, properties and rheology, including thermal and dynamics properties. Later chapters cover the dynamics of greased bearings, including grease life, bearing life, reliability and testing. The final chapter covers lubrications systems -- the systems that deliver grease to the components requiring lubrication.
• Describes the underlying physical and chemical properties of grease.
• Discusses the effect of load, speed, temperature, bearing geometry, bearing materials and grease type on bearing wear.
• Covers both bearing and grease performance, including thermo-mechanical ageing and testing methodologies.
Graduate students, researchers, practicing engineers in automotive and mechanical engineering. Tribologists, grease chemists and designers of rotary mechanism designers.
Piet M. Lugt joined SKF Engineering and Research Centre where he has fulfilled several positions in Tribology and Lubrication. He was a Visiting Professor at Luleå Technical University, Sweden from 2005-2008, and is currently a visiting Professor at the University of Twente.
Introduction to Tribology, 2e
Bharat Bhushan
978-1-119-94453-9 / 1-119-94453-8
744 pp. Pub: 08/03/13
Solid Mechanics
A fully updated version of the popular Introduction to Tribology, the second edition of this leading tribology text introduces the major developments in the understanding and interpretation of friction, wear and lubrication. Considerations of friction and wear have been fully revised to include recent analysis and data work, and friction mechanisms have been reappraised in light of current developments.
In this edition, the breakthroughs in tribology at the nano- and micro- level as well as recent developments in nanotechnology and magnetic storage technologies are introduced. A new chapter on the emerging field of green tribology and biomimetics is included.
• Introduces the topic of tribology from a mechanical engineering, mechanics and materials science points of view.
• Newly updated chapter covers both the underlying theory and the current applications of tribology to industry.
• Updated write-up on nanotribology and nanotechnology and introduction of a new chapter on green tribology and biomimetics.
• Enables readers to reinforce their knowledge of the topic with a newly added problems section which features on the book's companion website.
Graduate students on Mechanical Engineering courses
Dr Bhushan is Ohio Eminent Scholar and The Howard D. Winbigler Professor as well as Director of the Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics at The Ohio State University. He has been based at Ohio State since 1991 and, during his career, has achieved a number of awards and accolades as well as being central to teaching and formulating the curriculum in Tribology-related topics. A Fellow and Life Member of American Society of Mechanical Engineers, has also holds Honorary Professorships at several institutions around the world. He is Editor-in-Chief of Microsystem Technologies and Associate Editor of Beilstein Journal of Nanotechnology and he has previously published books and chapters with Wiley and other publishers.
M e c h a n i c a l E n g i n e e r i n g 4 2 W I L E Y
Principles and Applications to Tribology, 2e
Bharat Bhushan
978-1-119-94454-6 / 1-119-94454-6
1008 pp. Pub: 08/03/13
Solid Mechanics
This fully updated Second Edition provides the reader with the solid understanding of tribology which is essential to engineers involved in the design of, and ensuring the reliability of, machine parts and systems. It moves from basic theory to practice, examining tribology from the integrated viewpoint of mechanical engineering, mechanics, and materials science. It offers detailed coverage of the mechanisms of material wear, friction, and all of the major lubrication techniques - liquids, solids, and gases - and examines a wide range of both traditional and state-of-the-art applications.
For this edition, the author has included updates on friction, wear and lubrication, as well as completely revised material including the latest breakthroughs in tribology at the nano- and micro- level and a revised introduction to nanotechnology. Also included is a new chapter on the emerging field of green tribology and biomimetics.
• Covers tribology from a mechanical engineering, mechanics and materials science points of view.
• Updates in tribological components and applications as well as micro- and nano-tribology are also included, relevant to those working in the industry.
Mechanical, chemical, and materials engineers, Graduate students and Researchers. Undergraduate students on Mechanical Engineering courses.
Dr Bhushan is Ohio Eminent Scholar and The Howard D. Winbigler Professor as well as Director of the Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics at The Ohio State University. He has been based at Ohio State since 1991 and, during his career, has achieved a number of awards and accolades as well as being central to teaching and formulating the curriculum in Tribology-related topics. A Fellow and Life Member of American Society of Mechanical Engineers, has also holds Honorary Professorships at several institutions around the world. He is Editor-in-Chief of Microsystem Technologies and Associate Editor of Beilstein Journal of Nanotechnology and he has previously published books and chapters with Wiley and other publishers.
Structural Health Monitoring
Vibro-impact Dynamics
Albert C. J. Luo, Yu Guo
978-1-118-35945-7 / 1-118-35945-3
272 pp. Pub: 25/01/13
Solid Mechanics
Comprehensive understanding of any vibro-impact system is critically impeded by the lack of analytical tools viable for properly characterizing grazing bifurcation. The authors establish vibro-impact dynamics as a subset of the theory of discontinuous systems, thus enabling all vibro-impact systems to be explored and characterized for applications.
Vibro-impact Dynamics presents an original theoretical way of analyzing the behavior of vibro-impact dynamics that can be extended to discontinuous dynamics. All topics are logically integrated to allow for vibro-impact dynamics, the central theme, to be presented. It provides a unified treatment on the topic with a sound theoretical base that is applicable to both continuous and discrete systems
• Presents mapping dynamics to determine bifurcation and chaos in vibro-impact systems.
• Offers two simple vibro-impact systems with comprehensive physical interpretation of complex motions.
• Uses the theory for discontinuous dynamical systems on time-varying domains, to investigate the Fermi-oscillator.
Graduate students, university professors, researchers and scientists in mechanical engineering. Engineers and graduate students in mathematics and physics.
Professor Albert Luo, Department of Mechanical and Industrial Engineering Southern Illinois University, Edwardsville, USA is the author of numerous books, journal articles and conference proceedings. His teaching interests include advanced dynamics, dynamics of machinery, advanced stress analysis and dynamic system modeling. Professor Luo is presently a Member of the Advisory Panel for the PhD School, Universita degli Studi di Modena E Reggio Emilia, Italy. Yu Guo, Graduate Teaching Assistant Assistant at Southern Illinois University, Edwardsville, USA, lectures on Numerical Simulation, and Fluid Mechanics, and has five years' experience in vibration and fatigue testing using MTS devices. He specializes in C/C++ and Fortran programming
M e c h a n i c a l E n g i n e e r i n g 4 3 W I L E Y
Advanced Structural Damage Detection: From Theory to Engineering Applications
Tadeusz Stepinski
978-1-118-42298-4 / 1-118-42298-8
336 pp. Pub: 07/06/13
Solid Mechanics
Takes a multidisciplinary approach and provides a comprehensive review of current and novel SHM techniques.
• Presents real case studies and practical application of techniques for damage detection in different types of structures.
• Offers both theoretical principles and feasibility studies of a number of SHM techniques.
• Presents a number of new/novel data processing algorithms and demonstrates real operating prototypes.
Industry engineers, designers and manufacturers in mechanical and civil engineering. Graduate and postgraduate students in mechanical and civil engineering.
Tadeusz Stepinski is currently a Professor at Uppsala University, and since 2012 has also been a Professor at AGH University of Science and Technology in Poland. He has been active in the area of non-destructive testing and signal processing since the 1980s and has authored circa 140 technical publications. Tadeusz Uhl is a Professor at AGH University of Science and Technology in Poland. His main research areas are system identification, inverse problems, SHM and mechatronics. He has written circa 300 technical papers. Wies³aw Staszewski is a Professor at AGH University of Science and Technology in Poland. He has authored circa 280 publications, predominantly in the areas of damage detection and advanced signal processing. He has written and edited a book, authored circa 90 journal papers and is also an editor and associate editor of five journals. He was jointly awarded the "2004 Person of the Year" title by Structural Health Monitoring journal for outstanding contribution in the field of SHM.