8/2/2019 Krishna 417
1/22
BY
G VIJAYA KRISHNA
REG NO. 08MR1A0417
8/2/2019 Krishna 417
2/22
CONTENTS
1. INTRODUCTION
2. COMPONANTS USED IN RFID TECHNOLOGY
2.1. ACTIVE TAGS2.2. PASSIVE TAGS
2.3. RFID READER
3. CLASSIFICATION OF RFID BASED
TECHNOLOGIES3.1. TAG BASED TECHNOLOGY
3.2. READER BASED TECHNOLOGY
3.3. TRANSCEIVER FREE TECHNOLOGY
8/2/2019 Krishna 417
3/22
4. RFID TAG USED FOR LOCALIZATION ANDTRACKING
5. PROPOSED TECHNOLOGY FOR LOCALIZATIONAND TRACKING
5.1. TAG BASED SCHEME
5.2. TRANSCEIVER FREE SCHEME
6. ADVANTAGES
7. CONCLUSION
8/2/2019 Krishna 417
4/22
INTRODUCTION
Radio frequency (RF) technology uses electromagneticfrequency spectrum between 3Hz and 300 GHz
RFID enables identification from a distance and it does sowithout requiring a line of sight
RFID based jewellery management has been implementedin numerous countries especially in Dubai and China
8/2/2019 Krishna 417
5/22
COMPONENTS USED IN RFID
TECHNOLOGY
The RFID based localization and tracking uses two
components, the RFID tag and the reader
The RFID tags are mainly classified into twocategories: active tags and passive tags
8/2/2019 Krishna 417
6/22
ACTIVE TAGS
Active RFID tags have their own internal power sourcewhich is used to power any ICs that generate the
outgoing signal Active tags transmit at higher power levels than
passive tags, allowing them to be more effective in "RFchallenged" environments like water, metal
Many active tags have practical ranges of hundreds ofmeters, and a battery life of up to 10 years
8/2/2019 Krishna 417
7/22
PASSIVE TAGS Passive RFID tags have no internal power supply
The minute electrical current induced in the antennaby the incoming radio frequency signal provides justenough power for the CMOS integrated circuit in thetag to power up and transmit a response
The lack of an on-board power supply means that thedevice can be quite small
8/2/2019 Krishna 417
8/22
RFID READER
An RFID reader reads data from the tags using adefined radio frequency and protocol to transmit and
receive dataAn RFID reader is basically a radio frequency (RF)
transmitter and receiver, controlled by amicroprocessor or digital signal processor (DSP)
The RFID reader, using an attached antenna, capturesdata from RFID tags, and then passes the data to acomputer for processing
8/2/2019 Krishna 417
9/22
CLASSIFICATION OF RFID BASED
TECHNOLOGIES
There are three main types of RFID based localization
and tracking in an indoor environment:1. Tag Based Technology
2. Reader Based Technology
3.Transceiver Free Technology
8/2/2019 Krishna 417
10/22
TAG BASED TECHNOLOGY
LANDMARC was the first RFID tag basedTechnology.
The LANDMARC uses two different types of RFIDtags: reference tags and tracking tags.
The reference tags are used for purpose of
localization, while the tracking tags are attached to thetarget objects.
8/2/2019 Krishna 417
11/22
READER BASED TECHNOLOGY
In most of the RFID applications the tag is attached to
the mobile tracked object and the readers are at fixedlocations.
The location of the mobile user is determined from the
tag IDs (and possibly the RSS values) detected by theportable reader.
8/2/2019 Krishna 417
12/22
TRANSCEIVER FREE TECHNOLOGY
In this technology, the target object contains neitherthe tag nor the reader and hence it is called transceiverfree technology.
This method can be used in places where the usage of
tag or reader for tracking is not possible.
8/2/2019 Krishna 417
13/22
RFID TAG USED FOR LOCALIZATION
AND TRACKING
The RFID tag generallyused for localization and
tracking is NOX-2
The NOX-2 RFID tag has asuper-long read range
The operatingfrequency is 860-960MHz
8/2/2019 Krishna 417
14/22
PROPOSED TECHNOLOGY FOR
LOCALIZATION AND TRACKING
The proposed model of localization and tracking in ajewellery shop uses two schemes of RFID technology
merged together.
1. TAG BASED scheme during the
day time (9-21 hrs.).
2. TRANSCEIVER FREE scheme during thenight time (21-9hrs)
8/2/2019 Krishna 417
15/22
TAG BASED SCHEME
Here every single object is attached with a passive tag
which has its own unique identification number
This number is fed to the reader and a database of allthe RFID tags present within the range to be localized
is entered
8/2/2019 Krishna 417
16/22
8/2/2019 Krishna 417
17/22
TRANSCEIVER FREE SCHEME
Transceiver-free technology used to detect the objects
trajectory pattern without requiring the target to carryany device
Here the RFID reader and RFID tags are connected
through wireless signals
8/2/2019 Krishna 417
18/22
8/2/2019 Krishna 417
19/22
ADVANTAGES Low cost
Provides real time monitoring and security
Does not require line of sight
8/2/2019 Krishna 417
20/22
CONCLUSIONThis article presents an overview of our proposed
model which uses dual schemes of RFID forlocalization and tracking. The model uses lowcostapproaches to localize the target object with or without a device attached to the target. Thus themerged RFID technology paves way for numerousadvantages over the existing models and can be touted
to be one of the best of its kind in this field.
8/2/2019 Krishna 417
21/22
ANY QUERIES..?
8/2/2019 Krishna 417
22/22
THANK YOU