WWW.VARDHMANBERARINGS.COM
WWW.ARIHANTENGINEERS.COM
We at vardhman bearings are authorize dealer of JANATICS PNEUMATICS ..products , janatics air cylinders , janatics pneumatic cylinders ,
janatics directional control valves , janatics compact valves D S 2, janatics manually operated valves D S 2 , janatics panel mounting valves ,
janatics manual & mechanical valves , janatics solenoid valves J series , janatics solenoid valves DP1 series , janatics solenoid connectors ,
janatics 3/2 direct acting NC values -17 mm , janatics 3/2 direct acting NC valves – 22 mm , janatics airline valves , janatics air preparation
units , janatics pneumatics accessories , janatics pneumatics systems , janatics air preparation units NPT , janatics di rectional control valves
unit NPT ,
Janatics > Janatics Pneumatics Automation
Janatics Pneumatics has been established and manufacturing since more than three decades and have their manufacturing plant based in Coimbatore – India.
Janatics Pneumatics is an engineering focussed pneumatic automation company that have been providing Janatics Pneumatics qual ity pneumatic products and
expertise to the Indian market for over thirty years. Janatics Pneumatics is one of the major Manufacturers of Components for Pne umatics and Factory
Automation.
Beginning with air preparation units ( Frl ), moving on to air management devices such as Pneumatic manual and solenoid operated valves direct acting valves
and finally through to Pneumatic actuators, Pneumatic-Cylinders and handling equipment, Janatics Pneumatics cylinder, valve, & frl dealers & distributors can
always offer the right products.
Spares for Janatics Pneumatics products such as seal kits, piston seals, o-rings, filter element, filter plastic bowl, repair kit & service kit, solenoid coils &
connectors, auto drain, diaphragms, silencers, flow control & quick exhaust valves, hose pipes, pu tubings & push-in one touch fittings are available with the
dealers, distributors & stockists for immediate sales,repair & service for Standard & Large Bore Cylinders for Iso 6431 A12, A13 series, Iso 15552 A27, A28, A25,
A26 series, Vdma 24562 A23, A24, A63, A64 magnetic & nonmagnetic type series, Compact Cylinders A02, A03 series, Solenoid -Valves & Coils for J, Dp1, Ds2
series & Modular Air Preparation Units (Frls) for ¼”, ½”, ¾” & 1” Bsp sizes and other models also.
Janatics Pneumatics has poppet valve, solenoid valve, cylinder & frl dealers & distributors network spread over Lower Parel, Dadar, Mahim, Andheri, Goregaon,
Malad, Kandivili, Borivali, Dahisar, Mira Road, Bhayander, Vasai, Virar, Mulund, Thane, Palghar, Vapi, Daman, Boisar, Dahanu Road & outside Mumbai – India.
Also Janatics Pneumatics valve, cylinder & frl dealers & distributors are very prominent all over Maharashtra as in Pune, Kol hapur, Nashik and other locations in
India like Gujarat, Surat, Ahmedabad, Bangalore, Vizag, Indore, Nashik, Nagpur, Ludhiana, Chandigarh, Ernakulum, Hydrebad, Vadodara, Rajkot, Delhi, Chennai,
& Kolkata.
Janatics Pneumatics – Janatics Range of Pneumatic Products Include:-
Janatics Pneumatic Compressed Air Preparation >
Janatics Air Filter, Pressure Regulator & Oil Lubricator, Frl combinations & individual units for compressed modular air preparation ( Frl ). Available in ¼, 3/8, ½, ¾,
1” Bsp pipe connections and more.
Janatics Pneumatic Drives >
Standard Single & Double Acting Cylinders in Compact | Round | Min iature | Short Stroke & Rodless types conforming to Iso 6432, 15552, 21287 Vdma 24562
available in A12, A13 A27, A28, A25, A26 A23, A24 A63, A64, A02, A03 series in magnetic & nonmagnetic types.
Janatics Pu Tubings >
Pipes, Low & High Pressure Hoses, Janatics Pu (Polyurethane), Nylon, Polyamide Od, Id, Spiral Tube.
Janatics Pneumatic Fittings >
Push-in One Touch fittings in Elbow, Tee, Straight, Y types for m5, 1/8, ¼, 3/8, ½, ¾, & 1 Inch Bsp sizes / Barbed Fittings / Thre aded Fittings also Blanking, Bulk
Head Connectors & Plugs.
Janatics Pneumatic Valves - Pneumatics >
Standard pneumatic and universal directional valves > Solenoid & mechanically actuated valves in Ds2 & J series in 3/2, 5/2, 5/3 No / Nc types | Poppet Valves in
Dp1 series in 3/2 & 5/2 types | Solenoid Connectors in Ka, Kb,& Kc series in 32, 22 & 17 mm sizes | Direct Acting Valve in 3/2 & 2/2 Normally closed and open
types – 17mm & 22mm in Ac / Dc Voltages| shut-off valves | pressure-limiting valves and proportional valves.
Janatics Pneumatic Manual Valves >
Flow Control Valves in Gr & Gr2 series | Quick Exhaust Valve in Gq series | Inline Slide Valve in Gs1 series | Non Return Val ve in Gv1 series | Roller Lever Valves
| Hand Lever Valve in Ds2 series in different pipe connections.
Janatics Pneumatics Solenoid Coils & Accessories >
Janatics Solenoid Explosion Coils & Connectors in Ac & Dc Voltages | Janatics Solenoid Armature Set for poppet & solenoid val ve.
Janatics Pneumatics Silencers, Guages & Air Guns >
Janatics Silencers | Janatics Air Guns & Blower Nozzels | Janatics Pressure Guages for modular air preparation units(frl).
Janatics > Janatics Pneumatics > Dealer & Distributor Mumbai - India
Vardhman bearings is one of the largest dealer & distributor located in Andheri – Mumbai - India having a wide range of Janatics Pneumatics products. We give
free technical advice related to Janatics pneumatic products and provide immediate repair & service within Mumbai – India on Janatics Pneumatics products such
as poppet valves, Solenoid-Valves, direct acting valve, flow control quick exhaust valve,cylinders and modular air preparation units (frl) for all models. We are
market leaders in Janatics Pneumatics factory automation and pneumatic systems providing immediate sales & repair services in Lower Parel, Dadar, Mahim,
Andheri, Goregaon, Malad, Kandivili, Borivali, Dahisar, Mira Road, Bhayander, Vasai, Virar, Mulund, Thane, Palghar, Vapi, Dam an, Boisar, Dahanu Road &
outside Mumbai – India.
Vardhman bearings has also got a good prescence in the International Market and support OEMs and After Sales Dealers Distributors and Export their goods to
countries like Afghanistan Albania Algeria Antarctica Argentina Australia Austria Bahamas Bangladesh Barbados Belgium Bermuda Bhutan Bolivia Botswana
Brazil Brunei Bulgeria Cambodia Camaroon Canada Chile China Congo Colombia Costa Rica Cuba Cyprus Czech Republic Denmark Dominic an Republic
Ecuador Egypt El Salvador Equatorial Guinea Ethiopia Fiji Islands Finland France Georgia Germany Greece Greenland Guine a Hungary Indonesia Iran Iraq
Ireland Israel Italy Jamaica Japan Jordan Kazaksthan Kenya Korea Kuwait Lebanon Liberia Luxembourg Libya Malaysia Maldives Ma uritius Mongolia Montserrat
Morocco Mozambique Myanmar Namibia Nepal Netherlands New Zealand Nigeria Norway Oman Pakistan Panama Paraguay Peru Philippines Poland Portugal
Qatar Romania Russia Saudi Arabia Singapore Slovania Somalia South Africa South Georgia Spain Sri Lanka Sudan Sweden Switzerl and Syria Taiwan Tajikistan
Tanzania Thailand Tonga Turkey Uganda Ukraine United Arab Emirates United Kingdom United States Uruguay Uzbekistan Venezuela Vietnam Virgin Islands
Yemen Yugoslavia Zambia Zimbabwe by Air And Sea Transport on FOB or CIF Trade Terms.
Vardhman bearings is always here to help you with all your pneumatic requirements and repair & services ranging from Janatics Pneumatics factory automation
products and systems to component supply of Janatics Pneumatics Modular Air Filters, Regulators, Lubricators (Frl), Air Cylin ders, Compact Cylinders, Poppet
Valves, Flow Control Vavle, Solenoid-Valves, Pneumatic Pu One Touch Fittings & Tubings for most applications.
Also spares such as seal kits, piston seals, o-rings, filter element, filter plastic bowl, repair & sevice kit, auto drain, solenoid coils,diaphragms, silencers,
connectors, hose pipes, pu one touch tubings & fittings are available in stock for immediate repairing & servicing of Janatic s pneumatics Iso 6431 Vdma 24562
standard and custom made Air Cylinders, Poppet Valves, Flow Control Valves, Quick Exhaust Valves, Solenoid-Valves & Modular Air Preparation Units (Frls) and
other models.
Some of the popular products namely the Modular Air Filter Regulator Lubricator ( Frl ) series, Standard & Custom made Cylind ers Compact Cylinders in Iso 6431
Vdma 24562 Series, Flow Control Valves, Quick Exhaust Valves, Solenoid-Valves, Solenoid Coils & Connectors in Ac / Dc Voltages are available in bulk stock.
We offer the best competitive prices and discounts on bulk purchase of Janatics Pneumatics pneumatic produc ts and fastest delivery options in and around
Mumbai - India for all your Janatics Pneumatics pneumatic requirements.
Vardhman bearings also has an extensive range of other products like Electrical Temperature & Pressure Differential Switch and Ss Glycerin e Filled Pressure
Guages and of International Brands like Allen Bradley Siemens Omron Switzer Danfoss Indfoss Baumer Waree Orion Trafag Wika Fi ebig etc. All the products are
of international export quality and standards having international approvals and certifications from registered vendors which are mainly used in Process Industries
like Petrochemicals Oil And Gas Fertilizers Cement and Steel Pharmaceuticals Beverages Food Dairy Pet And Water Treatment OEM & Maintenance Industries.
We also deal in Magnetic Piston Filter Clogging Colour Band Indicators High Low Pressure Piston And Diaphragm Differential Dp Pressure Gauges Magne tic Float
Switches Flow Switches Flame Proof Flp Switches etc.
About product range
Since 1977, Janatics has been consistently focusing on development of new products and has more than 17000 models in its range.
Flagship products l ike Air preparation units, Fittings and Valves has made Janatics to be the number one Indian pneumatic pro duct manufacturer and had
enabled to sprawl globally
Exports to over 25 countries which includes UK, USA, Mexico, Germany, Australia, Kuwait, South Africa, Italy, Saudi Arabia, K enya, Egypt etc., would
vouchsafe the product quality
Product Gallery
Air Cylinders
View More..
Directional Control Valves
View More..
Air Line Valves
View More..
Air Preparation Units
View More..
Accessories
View More..
Pneumatic Systems
View More..
ISO 6431 (Tie rod)
As per ISO 6431 / CETOP RP43P, RP53P standards Cylinder sizes: Ø32, 40, 50, 63, 80 & 100 mm
Standard Cylinder - Series A12, A13
Double End Cylinder - Series A10, A11
ISO 15552 Tie rod (Ø32-100)
AS per ISO 15552 / VDMA 24562 standards (Barrel type) Cylinder sizes: Ø32, 40, 50, 63, 80 & 100 mm
ISO Standard Cylinder - Series A27, A28
Double End Cylinder - Series A25, A26
ISO 15552 Tie rod (Ø125-200)
As per 15552 / VDMA 24562 standards (Barrel type) Cylinder sizes: Ø125, 160 & 200 mm
ISO Standard Cylinder - Series A16, A17
Double End Cylinder - Series A18, A19
VDMA 24562 (Square profile)
As per ISO 15552 / VDMA 24562 standards Cylinder sizes: Ø32, 40, 50, 63, 80, 100 & 125 mm
Air Cylinder (Square Type Profile) - Series A23, A24
Double End Cylinder - Series A20, A21
ISO 21287 (Ø25-100)
Compact ISO cylinders As per ISO 21287 standards
Cylinder sizes: Ø25, 32, 40, 50, 63, 80 & 100 mm
ISO Standard Cylinder - Series A63, A64
Double End Cylinder - Series A60, A61
Compact Cylinders
Compact Cylinder - Series A02 Compact Magnetic Cylinder - Series A03
Cylinder Sizes: Ø12, 16, 20, 25, 32, 40, 50, 63, 80 & 100mm
ISO 6432 / CETOP RP52P
ISO Miniature Cylinders - Series A51, A52 Cylinder sizes: Ø12, 16, 20 & 25mm
ISO Miniature Cylinder with Cushioning - Series A55, A56 (Ø25mm only)
Air Cylinder Accessories
Air Cylinder Accessories Magnetic Sensors
Reed switches
Connector cables
Standard Cylinder A12, A13 As per ISO 6431 / CETOP RP43P, RP53P standards
Adjustable cushioning at both ends Wide varieties of mountings
Long life
Magnetic and non magnetic versions
Double End Cylinder A10, A11 Double Acting - Ø32-100 mm
Adjustable cushioning at both ends Wide variety of mountings
Magnetic & Non Magnetic versions
Long life
Vardhman bearings are dealers of janatics pneumatics products , janatics dealers , janatics stockiest , janatics pneumatics suppliers ,
janatics pneumatics manufacturers , janatics valves seal kit dealers , janatics pneumatics price list , janatics products dealers , janatics
products manufacturers , janatics pneumatics in india , janatics pneumatics in Mumbai , janatics pneumatics in pune , janatics pneumatics
in Maharashtra , janatics pneumatics in delhi , janatics pneumatics in Nagpur , janatics pneumatics in kolkatta , janatics pneumatics in
banaglore , janatics pneumatics in Chennai , janatics pneumatics in hyderbad , janati cs pneumatics in Coimbatore , janatics pneumatics
in tamilnadu , janatics pneumatics in Punjab ,
Janatics Pneumatic Products
We are one of the leading organizations engaged in trading and distributing of wide range of Pneumatic products. We are engaged in distributing pneumatics
products manufactured by “Janatics Pneumatic:
Pneumatic Cylinder
SO 6431 (Tie rod)
As per ISO 6431 / CETOP RP43P, RP53P standards
Cylinder sizes: Ø32, 40, 50, 63, 80 & 100 mm
Standard Cylinder - Series A12, A13
Double End Cylinder - Series A10, A11
ISO 15552 Tie rod (Ø125-200)
As per 15552 / VDMA 24562 standards (Barrel type)
Cylinder sizes: Ø126, 160 & 200 mm
ISO Standard Cylinder - Series A16, A17
Double End Cylinder - Series A18, A19
VDMA 24562 (Square profile)
As per ISO 15552 / VDMA 24562 standards
Cylinder sizes: Ø32, 40, 50, 63, 80, 100 & 125 mm
Air Cylinder (Square Type Profile) - Series A23, A24
Double End Cylinder - Series A20, A21
ISO 21287 (Ø25-100)
Compact ISO cylinders
As per ISO 21287 standards
Cylinder sizes: Ø25, 32, 40, 50, 63, 80 & 100 mm
ISO Standard Cylinder - Series A63, A64
Double End Cylinder - Series A60, A61
Compact Cylinders
Compact Cylinder - Series A02
Compact Magnetic Cylinder - Series A03
Cylinder Sizes: Ø12, 16, 20, 25, 32, 40, 50, 63, 80 & 100mm
ISO 6432 / CETOP RP52P
ISO Miniature Cylinders - Series A51, A52
Cylinder sizes: Ø12, 16, 20 & 25mm
ISO Miniature Cylinder with Cushioning - Series A55, A56 (Ø25mm only)
Vardhman bearings deal in janatics pneumatic products , janatics dealers , janatics stockiest ,
janatics valves , janatics hoses , janatics products ,
Pneumatic Directional Control Valves
Leveraging upon rich vendor base, we are trading and distributing pneumatic control valves. These are known fo r features
like long service life, low maintenance and corrosion resistance. Apart from this we traded different types of valves:
Solenoid Compact Valve DS2
Sizes: 1/8, 1/4 & 1/2
3/2, 5/2, 5/3 type available
Available for different standard coil voltages
Manifold mounting is possible
Solenoid Valves DP1 series
Size G1/4 - 3/2, 5/2
Diaphragm operated poppet seat
No lubrication required
Maintenance free
Wide range of coil voltages
Continuous duty cycle
Good flow characteristics
Coil can be rotated by 360°
Suitable for dirty / dusty environment
Solenoid Connectors
Series KA, KB, KC - (Solenoid Connectors 32mm, 22mm, 17mm)
Confirms to DIN 43650 standards
Central screw ensures vibration proof interlocking
Suitable for solenoid valves
Models available with transparent housing and indicator lamps
Connector with circuit to protect the source and load is available
Manually Operated Valves DS2
3/2, 5/2, 5/3 valves
Suitable for 8 bar - G1/8, 10 bar - G1/4, G1/2 air pressure
Mounting provision for individual unit
Suitable for panel mounting
Panel Mounting Valves
Panel Mounting Valve - G1/8
- Spool Design
- Mounting provision for individual unit
Panel Mounting Valve - M5
- Poppet design
- Mounting provision for individual un
Manual & Mechanical Valves
3/2 NO / NC & 5/2 versions
Suitable for 10 bar air pressure
Basic, Roller lever, Finger lever and Foot operated type available
Send Enquiry
Air Preparation Unit (FRL)
Filter
Filter with Manual Drain
Filter with Internal Auto Drain
Filter with Metal bowl
Mist Separator
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Regulator
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Regulator
Regulator with NRV
Lubricator
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Lubricator
Lubricator with Metal Bowl
Filter Regulator Combination
FRC with Manual Drain
FRC with Internal Auto Drain
FRC with Metal Bowl
Sizes: G1/4, G3/8, G1/2, G3/4, G1
FRCL Modular
Filter Regulator Combination Lubricator with Modular
FRCLM without Piping Adopter
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Send Enquiry
PU Tube & Push Fittings
One Touch Fittings
WP2 series (Sizes Ø4, 6, 8, 10, 12, 14 and 16mm)
Attractive design
Compact size
Threaded nipples of L,T and Y fittings enable plastic portion to turn by 360 degree
Full area of the inner bore of the tubing is available for flow of fluid
Bubble tight sealing of tubes
Suitable for both Nylon and PU tubing
Easy and quick push in connection of tube/easy removal of tube by simple pres sing of collet cap
New design Stainless steel collet
Teflon pre coated male taper threads
Maintenance free and long life
The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet
Polyurethane Tubes Coloured
WH Series - Sizes Ø4, 6, 8, 10, 12mm OD (Silver, Transparent, Red, Black, Yellow)
Provide differentiation of air line in pneumatic circuits
Polyurethane Coiled Tube
WHC series (Tube sizes Ø4, 6, 8, 10, 12mm OD)
Self retracting & space saving
Send Enquiry
Pneumatic Accessories
Air Blow Gun
WB series (Size G1/4)
Easy handling
Compact size
Attractive design
Good flow and characteristics
Junction box
WJ series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Wide range of models available
Aluminium anodized body
Mounting holes provided
Silencer
AS series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Brass body and sintered bronze silencer elements
Button, Conical, Silencer cum flow control (with lock nut), Silencer cum flow control (with spring) types
Good flow and silencing characteristics
Can be cleaned by kerosene and soap water
Tube Holder
WT series (Sizes Ø4, 6, 8, 10, 12mm)
Suitable for Nylon & Polyurethane tubes
One Touch Fittings WP2 series (Sizes Ø4, 6, 8, 10, 12, 14 and 16mm)
Attractive design Compact size
Threaded nipples of L,T and Y fittings enable plastic portion to turn by 360 degree
Full area of the inner bore of the tubing is available for flow of fluid
Bubble tight sealing of tubes
Suitable for both Nylon and PU tubing
Easy and quick push in connection of tube/easy removal of tube by simple pressing of collet cap
New design Stainless steel collet
Teflon pre coated male taper threads
Maintenance free and long life
The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet
Air Blow Gun WB series (Size G1/4)
Easy handling Compact size
Attractive design
Good flow and characteristics
Nipples WN series (Sizes M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1)
Wide variety of nipples available Nickel plated brass body
Male (R) taper threads with thread sealant coating, Male parallel threads with sealing washer (M5 only)
Junction box WJ series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Wide range of models available Aluminium anodized body
Mounting holes provided
Silencer AS series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Brass body and sintered bronze silencer elements Button, Conical, Silencer cum flow control (with lock nut), Silencer cum flow control
(with spring) types
Good flow and silencing characteristics
Can be cleaned by kerosene and soap water
Quick coupler WQ series (Sizes 1/4, 1/2)
Nickel plated brass body High flow characteristics
Wide range of models
Maintenance free and long life
Compact size
Attractive design
Polyurethane Tubes Coloured WH Series - Sizes Ø4, 6, 8, 10, 12mm OD (Silver, Transparent, Red, Black, Yellow)
Provide differentiation of air line in pneumatic circuits
Polyurethane Coiled Tube WHC series (Tube sizes Ø4, 6, 8, 10, 12mm OD)
Self retracting & space saving
Tube Holder WT series (Sizes Ø4, 6, 8, 10, 12mm)
Suitable for Nylon & Polyurethane tubes
His
Polyurethane Coiled Tube
WHC series (Tube sizes: Ø4, 6, 8, 10, 12mm OD)
Polyurethane Tubes Coloured
WH Series - Sizes: Ø4, 6, 8, 10, 12mm OD (Silver, Transparent, Red,
Black, Yellow)
Quick coupler
WQ series (Sizes : 1/4, 1/2)
Silencer
AS series (Sizes : M5, 1/8, 1/4, 3/8, 1/2)
Junction box
WJ series (Sizes : M5, 1/8, 1/4, 3/8, 1/2)
Nipples
WN series (Sizes : M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1)
Air Blow Gun
WB series (Size: G1/4)
One Touch Fittings
WP2 series (Sizes : Ø4, 6, 8, 10, 12, 14 and 16mm)
Filter
Filter with Manual Drain Filter with Internal Autodrain
Filter with Metal bowl
Mist Separator
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Regulator
Sizes: G1/4, G3/8, G1/2, G3/4, G1 Regulator
Regulator with NRV
Lubricator
Sizes: G1/4, G3/8, G1/2, G3/4, G1 Lubricator
Lubricator with Metalbowl
Filter Regulator Combination
FRC with Manual Drain FRC with Internal Autodrain
FRC with Metalbowl
Sizes: G1/4, G3/8, G1/2, G3/4, G1
FRL Modular
Filter, Regulator, Lubricator with Modular FRLM without Piping Adopter
Sizes: G1/4, G3/8, G1/2, G3/4, G1
FRCL Modular
Filter Regulator Combination Lubricator with Modular FRCLM without Piping Adopter
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Accessories
Modular Construction FRL Clamps
Pressure Gauges
Panel Mounting Pressure Gauges
Auto Drain Valve
Shut Off Valve GS2 Series (Sizes G1/4, G3/8, G1/2)
Connecting thread at both ends Connection - G1/4, G3/8, G1/2
Modular mounting with FRL
Shut Off Valve Lockable GS2 Series (Sizes G1/4, G3/8, G1/2)
Modular mounting with FRL Port thread at both ends
Window display to show the valve position • ( i.e.) the valve is in On condition or Off condition
Pressure Switch PW series - Size R1/8
Quick response Easy adjustability of set pressure
Hysteresis adjustable
Pressure Sensor - 2 outputs Digital Pressure Sensor (PS series) - Size R1/8
Set pressure selectable (Mpa, psi, kgf/cm2, bar) Both upper and lower limits of pressure can be set independently
Panel mountable
Direct mountable
Both PNP & NPN versions
Two outputs
Pressure Sensor - 1 output Digital Pressure Sensor (Series PS - R1/8
2 Colours display (Red / Green) Set pressure selectable (kPa, psi, kgf/cm2, bar)
Both upper and lower limits of pressure can be set independently
Panel mountable
Direct mountable
Both PNP & NPN versions
Single output
Regulator R1 series - Sizes G1/4, G3/8, G1/2, 3/4, 1
Conform to ISO 6953 1 Suitable for panel and modular mountings
Non raising Press to Lock adjusting knob for locking at any set pressure
Diaphragm operated, relieving type
Pressure compensated by balanced poppet
Flow compensated in models R14, R15 and R17 (with venturi) for faster response
Good flow and regulating characteristics
Regulator Built in NRV R1N Series - Air Regulator (With built in Non Return Valve) - Sizes G1/4, 3/8, 1/2
Conform to ISO 6953 1 Suitable for panel and modular mountings
Non raising Press to Lock adjusting knob for locking at any set pressure
Diaphragm operated, relieving type
Pressure compensated by balanced poppet
Flow compensated in models R14 and R15 (with venturi) for faster response
Good flow and regulating characteristics
Built in non return valve allows free air flow in reverse direction. When the inlet air is reduced by and below the setup pressure
Regulator Built in NRV
R1N Series - Air Regulator (With built in Non Return Valve) - Sizes G1/4, 3/8, 1/2
Lubricator L1 series - Sizes G1/4, G3/8, G1/2, G3/4, G1
Conform to ISO 6301-1 Suitable for Modular mounting
Fog/Mist type
Fine adjustment of lubrication
Steel bowlguard, bayonet type on L14, L15 & L17 models and threaded type on L13 model
Lubrication proportional to flow
Lubricator with Metalbowl L1M series - Sizes G1/4, G3/8, G1/2, G3/4, G1
For higher pressure range above 10 bar Suitable for Modular mounting
Fog / mist type
Fine adjustment of lubrication
Aluminium bowl guard, bayonet type (3/4 and 1" only)
Lubrication proportional to flow
Lubricator with Metalbowl
L1M series - Sizes : G1/4, G3/8, G1/2, G3/4, G1
FRC with Manual drain FRC1 series - Sizes G1/4, 3/8, 1/2, 3/4, 1
Modular type Suitable for panel mounting
Filter • Bronze filtering element • Separator and shield for efficient moisture separation
Regulator • Diaphragm operated, relieving type • Pressure compensated by balanced poppet • Flow compensated in models FRC14, FRC15 and FRC17 for faster response • Non raising press to lock adjusting knob for locking at any set pressure
Steel bowl guard, bayonet type on FRC14, FRC15 & FRC17 models and threaded type on FRC13 model
Good flow and regulating characteristics
FRC with Internal Autodrain FRC1A series - Sizes G3/8, 1/2, 3/4, 1
Modular type Suitable for panel mounting
Filter • Bronze filtering element • Separator and shield for efficient moisture separation • Bayonet type steel bowl guard
Internal auto drain • Float type, no electrical connections required • Provided with manual drain • Provision for drain tube connection, to take the condensate away from the unit, to keep the working area clean
Regulator
• Diaphragm operated, relieving type • Pressure compensated by balanced poppet • Flow compensated for faster response • Non raising Press to lock adjusting knob for locking at any set pressure
Good flow and regulating characteristics
FRC with Metal Bowl FRC1M series - Sizes G1/4, 3/8, 1/2, 3/4, 1
Modular type Suitable for panel mounting
Filter • Bronze filtering element • Separator and shield for efficient moisture separation • Press type manual drain for easy operation • Suitable for automatic drain
Regulator • Diaphragm operated, relieving type • Pressure compensated by balanced poppet • Flow compensated • Non raising Press to lock adjusting knob
Aluminium bowl guard, bayonet type (3/4 and 1" only)
Good flow and regulating characteristics
Flow Control Valve GR2 series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Directly mountable on cylinder/valve ports Can be rotated by 360 degree
Fine regulation of air flow
Nickel plated body
Male threads(R) teflon coated
Elegant design and finish
Flow Control Valve - Metal Series GR - Sizes M5, 1/8, 1/4, 3/8, 1/2 (Metal type Flow control valves)
Directly mountable on cylinder / valve ports Fine regulation of air flow
Male threads (G) with sealing washer
Elegant design and finish
Slotted head screw adjusting type
Flow control valve - Inline type GR2 series (Sizes Ø4, 6, 8, 10 & 12mm)
Fine regulation of air flow Elegant design and finish
Available sizes : Ø4, 6, 8, 10 & 12mm
Quick Exhaust Valve GQ series (Sizes M5, G1/8, G1/4, G3/8, G1/2)
Increase the speed of the cylinder With / without silencer
Connection - M5, G1/8, G1/4, G3/8, G1/2
Type GQ01 series is with silencer to reduce the exhaust noise
Pilot operated Non-Return Valve GV2 series (Sizes G1/8, G1/4, G3/8, G1/2)
Available in two versions Low cracking and closing pressure
Bubble tight - elastomer seat
Plastic portion can be turned by 360°
Teflon pre-coated male taper threads
Inline Slide Valve GS1 series (Sizes R1/8, R1/4, R3/8, R1/2, R3/4)
Inline mounted Sleeve type, saves space
Smooth, easy operation
Non Return Valve GV1 series (Sizes G1/8, G1/4, G3/8, G1/2)
In line mounting Low cracking and closing pressure
Bubble tight elastomer seat
AND Valve GA series (Sizes M5, G1/8, G1/4)
AND valve delivers air at the outlet (A) only when air signal is present at both inputs (X and Y)
If two signals of different pressure is applied, the lower pressure is connected to outlet (A).
OR Valve GB series (Sizes M5, G1/8, G1/4 )
OR valve delivers air at the outlet (A) always supplied by higher pressure (X or Y) If two signals of different pressure is applied, the higher pressure is connected to
outlet (A)
Shut Off Valve - Hand lever Series GS3 - Hand lever operated ball valves - G1/4, 3/8, 1/2, 3/4, 1, 1¼, 1½, 2
Ball type In line mounting
Easy and smooth operation
Assembly on rigid pipe system
Maintenance free
Bubble tight sealing
Shut Off Valve - Knob type Series GS3 - Knob operated ball valves - G1/8, 1/4, 3/8, 1/2
Ball type In line mounting
Easy and smooth operation
Assembly on rigid pipe system
Maintenance free
Bubble tight sealing
Janatics complete product range in ready stock delivery from vardhman bearings
Janatics valves dealers , stockiest , importers , janatics pneumatic cylinder , janatics FRLS , janatics
solenoid valves ,