Introduction of
Control System
GOVERNMENT ENGINEERING COLLAGE
DAHOD
Prepared by:140183109019 Siddqui Arshad hussain A.follow me : Web link http://sah9.blogspot.comwww.facebook.com/Sah92786https://www.linkedin.com/in/arshad-hussain-8b0a2613b
Contain:
Introduction Terms and ConceptsOpen loop system
Closed loop systemExamples of control system
Application
Introduction
Control
• The word control is usually taken to mean:• - Regulate,
- Direct,
- Command.
http://sah9.blogspot.com
Control system
• A control system is an arrangement of physical components connected or related in such a manner as to command, direct, or regulate itself or another system.
http://sah9.blogspot.com
Input
• The input is the stimulus, excitation or command applied to a control system.
• Typically from external energy source, usually in order to produce a specified response from the control system.
http://sah9.blogspot.com
Output
• The output is the actual response obtained from a control system.
• It may or may not be equal to specified response implied by the input.
http://sah9.blogspot.com
Terms and Concepts
http://sah9.blogspot.com
Control system
• A control system is an interconnection of components forming a system configuration that will provide a desired system response.
http://sah9.blogspot.com
Two Types of Control Systems
• Open Loop– No feedback– Difficult to
control output with accuracy
• Closed Loop–Must have feedback–Must have sensor on
output– Almost always
negative feedback
http://sah9.blogspot.com
http://sah9.blogspot.com
Open loop system
Open-loop system:
Open-loop control
An open-loop control system utilizes an actuating device to control the process directly without using feedback.
A common example of an open-loop control system is an electric toaster in the kitchen.
http://sah9.blogspot.com
http://sah9.blogspot.com
http://sah9.blogspot.com
Closed loop system
http://sah9.blogspot.com
Closed loop system:
Closed-loop control
A closed-loop control system uses a measurement of the output and feedback of this signal to compare it with the desired output.
http://sah9.blogspot.com
http://sah9.blogspot.com
http://sah9.blogspot.com
Example of control system
Manual control system
http://sah9.blogspot.com
Goal: Regulate the level of fluid by adjusting the output valve.
The input is a reference level of fluid and is memorized by operator.The power amplifier is the operator.The sensor is visual.Operator compares the actual level with the desired level and opens or closes the valve ( actuator).
The level of fluid in a tank control.
http://sah9.blogspot.com
Controlling the position of a missile launcher from a remote location
The input is the desired angular position of the missile launcher, The control system consists:of potentiometer, power amplifier, motor, gearing between the motor and the missile launcher,missile launcher.
http://sah9.blogspot.com
A position open loop control
The input is the desired angular position of the missile launcher, and the control system consists of potentiometer, power amplifier, motor, gearing between the motor and missile launcher, and missile launcher.
http://sah9.blogspot.com
A position closed loop control
Should an error exists, it is amplified and applied to a motor drive which adjusts the output-shaft position until it agrees with the input-shaft position, and the error is zero.
http://sah9.blogspot.com
Applications• Control engineering is not limited to any
engineering discipline but is equally applicable to:
• aeronautical,• chemical,• mechanical,• computer science and engineering , • civil engineering,• electrical engineering.
http://sah9.blogspot.com
http://sah9.blogspot.com
Reference:
• www.nptel.com• http://www.electrical-engineering-assignment.com• www.Google.co.in search engine• Control system engineering text book (Pub: techmax)• Web link http://sah9.blogspot.com• www.facebook.com/Sah92786• https://www.linkedin.com/in/arshad-
hussain-8b0a2613b
http://sah9.blogspot.com
THANKYOU