Introducing Technical Specification ISO/TS
22002-1:2009 –Prescriptive Prerequisite Programmes for Food
Manufacturing
www.22000foodsafety.com
What is Technical Specification ISO/TS 22002-1:2009?
ISO 22000:2005 sets out specific food safety requirements for organizations in the food chain.
One requirement of ISO 22000 is that organizations establish, implement and maintain prerequisite programmes to assist in controlling food safety hazards (Clause 7).
Technical Specification ISO/TS 22002-1:2009 is intended to be used to support food safety management systems meeting the requirements specified in ISO 22000:2005 and contains detailed requirements for prerequisite programmes.
21/7/2010 www.22000foodsafety.com
What is Technical Specification ISO/TS 22002-1:2009?
Technical Specification ISO/TS 22002-1:2009 is intended to be used in conjunction with ISO 22000:2005.
Technical Specification ISO/TS 22002-1:2009 was published on December 15th, 2009.
Technical Specification ISO/TS 22002-1:2009 is applicable to all organizations, regardless of size or complexity, involved in food manufacturing.
www.22000foodsafety.com 31/7/2010
What is ISO 22000:2005?
ISO 22000 is designed for the certification of established Food Safety Management Systems and so an organisations FSMS can be certified as compliant with this standard by an independent body.
An organisation can be in compliance with ISO 22000:2005 without being formally certified by an accredited body. An organisation can apply the food safety management system and state that the FSMS complies with ISO 22000, however, the system is likely to have more credibility with customers if it has been approved by an independent body.
www.22000foodsafety.com 41/7/2010
What is ISO 22000:2005?
In order to comply with ISO 22000 an organisation shall:
Plan, implement, maintain and update a food safety management system to supply products that are safe for the consumer
Demonstrate compliance with applicable customer, statutory and regulatory food safety requirements
Demonstrate compliance with recognised industry codes of practice
Effectively communicate food safety issues to suppliers, customers and relevant parties in the food chain
Conform to the stated food safety policy Demonstrate such conformity to relevant interested
parties
www.22000foodsafety.com 51/7/2010
What is ISO 22000:2005?
ISO 22000 integrates the principles of the Hazard Analysis and Critical Control Point (HACCP) system developed by the Codex Alimentarius Commission with prerequisite programmes. Hazard analysis is the key to an effective food safety management system.ISO 22000 assists in defining the system requirements to gather the information and knowledge in order to establish an effective combination of control measures. ISO 22000 requires that all hazards that may be reasonably expected to occur in the food chain, including hazards that may be associated with the process and facilities used, are identified and assessed. During hazard analysis, the FSMS ensures hazard control by combining the prerequisite programmes, operational prerequisite programmes and HACCP plans.
www.22000foodsafety.com 61/7/2010
ISO 22000 Definitions
Prerequisite Programme (PRP)
Base conditions and activities that are necessary to maintain a safe environment for the production, handling and provision of safe end products. These are infrastructure and maintenance prerequisites that an organisation has decided are the minimum pre-conditional hygienic conditions.
www.22000foodsafety.com 71/7/2010
ISO 22000 Definitions
Operational Prerequisite Programme (Operational PRP)A prerequisite programme identified by the hazard analysis as essential in order to control food safety hazards in the product or in the process.
An operational prerequisite programme is a specified procedure(s) or instruction(s), specific to the nature and size of the operation, that enhances and/or maintains operational conditions to enable more effective control of food safety hazards and/or that controls the likelihood of introducing food safety hazards and their contamination of or proliferation in the product(s) and product processing environment.
Types of operational prerequisites include:Physical contamination controls ( e.g. Metal detection)Chemical contamination controls (e.g. Cleaning controls)Prevention of cross contamination (e.g. Allergen controls)
www.22000foodsafety.com 81/7/2010
What is Technical Specification ISO/TS 22002-1:2009?
The new ISO 22002 Technical Specification specifies requirements to be specifically considered in relation to ISO 22000:2005 7.2.3 including:a) construction and layout of buildings and utilitiesb) layout of premises, including workspace and employee facilitiesc) supplies of air, water, energy and other utilitiesd) supporting services, including waste and sewage disposale) suitability of equipment and its accessibility for cleaning and maintenancef) management of purchased materials
www.22000foodsafety.com 91/7/2010
What is Technical Specification ISO/TS 22002-1:2009?
The new ISO 22002 Technical Specification specifies requirements to be specifically considered in relation to ISO 22000:2005 7.2.3 including:g) measures for the prevention of cross-contaminationh) cleaning and sanitizingi) pest controlj) personnel hygiene
In addition Technical Specification ISO/TS 22002-1:2009 includes prerequisite programmes for rework, product recall procedures, warehousing, product information and consumer awareness, food defence, biovigilance and bioterrorism.
www.22000foodsafety.com 101/7/2010
What is Technical Specification ISO/TS 22002-1:2009?
Exclusions to Technical Specification ISO/TS 22002-1:2009 need to be justified and documented by a hazard analysis, as prescribed in ISO 22000:2005 Clause7.4.
The following slides show the sections of Technical Specification ISO/TS 22002-1:2009 and a summary of the compliant documents provided in our ISO 22000 Certification Package.
www.22000foodsafety.com 111/7/2010
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 121/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
4. Construction and layout of buildings
4.1 General requirements PRP 4.1 Design and Construction of Buildings
4.2 Environment PRP 4.2 Environment Prerequisite Programmes
4.3 Locations of establishments PRP 4.3 Site Location and Standards
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 131/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
5. Layout of premises workspace
5.1General requirements PRP 5.1 Layout of Premises and Workspace
5.2 Internal design, layout and traffic patterns
PRP 5.2 Internal Design and Layout
5.3 Internal structures PRP 5.3 Internal Structure
5.4 Location of equipment PRP 5.4 Equipment Design and Location
5.5 Laboratory facilities PRP 5.5 Laboratory Facilities
5.6 Temporary/mobile premises and vending machines
PRP 5.6 Temporary Structures and Vending Machine Facilities
5.7 Storage of food, packaging
materials, ingredients and non food chemicals
PRP 5.7 Storage
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 141/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
6. Utilities – air, water, energy
6.1 General requirements PRP 6.1 Site Services
6.2 Water supply PRP 6.2 Control of Water Supply
6.3 Boiler chemicals PRP 6.3 Control of Boiler Chemicals
6.4 Air quality ventilation PRP 6.4 Control of Air Supply
6.5 Compressed air and other gases PRP 6.5 Control of Compressed Air and Gases
6.6 Lighting PRP 6.6 Lighting
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 151/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
7. Waste disposal
7.1 General requirements PRP 7.1 Waste Management
7.2 Containers for waste and inedible or hazardous substances
PRP 7.2 Waste Container Management
7.3 Waste management and removal PRP 7.3 Waste Disposal
7.4 Drains and drainage PRP 7.4 Drainage Systems
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 161/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
8. Equipment suitability, cleaning and maintenance
8.1 General requirements PRP 8.1 Equipment Prerequisite Programmes
8.2 Hygienic design PRP 8.2 Equipment Hygienic Design
8.3 Product contact surfaces PRP 8.3 Food Contact Surfaces
8.4 Temperature control and monitoring equipment
PRP 8.4 Monitoring Equipment
8.5 Cleaning plant, utensils and equipment
PRP 8.5 Equipment Cleaning
8.6 Preventive and corrective maintenance
PRP 8.6 Maintenance Prerequisite Programmes
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 171/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
9. Management of purchased materials
9.1 General requirements PRP 9.1 Purchasing Prerequisite Programmes
9.2 Selection and management of suppliers
PRP 9.2 Supplier Approval and Monitoring
9.3 Incoming material requirements (raw/ingredients/packaging)
PRP 9.3 Control of Incoming Materials
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 181/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
10. Measures for prevention of cross contamination
10.1 General requirements PRP 10.1 Prevention of Contamination
10.2 Microbiological cross contamination
PRP 10.2 Prevention of Microbiological Contamination
10.3 Allergen management PRP 10.3 Allergen Control System
10.4 Physical contamination PRP 10.4 Prevention of Physical Contamination
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 191/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
11. Cleaning and sanitizing
11.1 General requirements PRP 11.1 Cleaning Prerequisite Programmes
11.2 Cleaning and sanitizing agents and tools
PRP 11.2 Cleaning Agents and Equipment
11.3 Cleaning and sanitizing programmes
PRP 11.3 Cleaning Procedures
11.4 Cleaning in place (CIP) systems PRP 11.4 CIP Systems Prerequisites
11.5 Monitoring sanitation effectiveness PRP 11.5 Monitoring of Cleaning Effectiveness
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 201/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
12. Pest control
12.1 General requirements PRP 12.1 Pest Control Prerequisites
12.2 Pest control programmes PRP 12.2 Pest Control Programme
12.3 Preventing access PRP 12.3 Prevention of Pest Access
12.4 Harbourage and infestations PRP 12.4 Prevention of Pest Harbourage
12.5 Monitoring and detection PRP 12.5 Pest Monitoring
12.6 Eradication PRP 12.6 Pest Eradication
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 211/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
13. Personnel hygiene and employee facilities
13.1 General requirements PRP 13.1 Personal Hygiene and Personnel Facilities Prerequisites
13.2 Personnel hygiene facilities and toilets
PRP 13.2 Personnel Hygiene Facilities
13.3 Staff canteens and designated eating areas
PRP 13.3 Personnel Canteen Facilities
13.4 Work wear and protective clothing PRP 13.4 Protective Work Wear
13.5 Health status PRP 13.5 Medical Screening
13.6 Illness and injuries PRP 13.6 Illness Reporting Systems
13.7 Personal cleanliness PRP 13.7 Personal Cleanliness
13.8 Personal behaviour PRP 13.8 Personal Behaviour
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 221/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
14. Rework
14.1 General requirements PRP 14.1 Rework Prerequisite Programmes
14.2 Storage. Identification and traceability
PRP 14.2 Rework Storage Identification and Traceability
14.3 Rework usage PRP 14.3 Rework Usage Prerequisites
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 231/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
15. Product recall procedures
15.1 General requirements PRP 15.1 Product Recall Prerequisite Programmes
15.2 Product recall requirements PRP 15.2 Product Recall Procedure Prerequisites
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 241/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
16. Warehousing
16.1 General requirements PRP 16.1 Storage Prerequisites
16.2 Warehousing requirements PRP 16.2 Warehousing Prerequisites
16.3 Vehicles, conveyances and containers
PRP 16.3 Despatch and Distribution Prerequisites
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 251/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
17. Product information/consumer awareness
17.1 Product information PRP 17.1 Product Information Prerequisites
17.2 Labelling of pre-packaged foods PRP 17.2 Product Labelling Controls
Technical Specification ISO/TS 22002-1:2009
www.22000foodsafety.com 261/7/2010
ISO 22002 Compliance Summary
ISO 22002 Requirements ISO 22000 FSQMS Procedures
18. Food defence, biovigilance and bioterrorism
18.1 General requirements PRP 18.1 Food Defence System
18.2 Access controls PRP 18.2 Access Controls
About Technical Specification ISO/TS 22002-1:2009
In addition to Prerequisite Programmes the www.22000foodsafety.com ISO 22000 Certification Package contains Verification Records for each Prerequisite Programme and a set of Operational Prerequisite Programmes and corresponding Validation Records.
www.22000foodsafety.com 271/7/2010