VIJAY LAKSHMI AGRICULTURE P. LTD.
SUPER ONE AGRO – Farm Equipments Division Manufacturing: Export Unit – 1, Mugal Majra Road, Kunjpura, KARNAL - 132001 (HR) INDIA
+91.184.238.5200 / 5400 | www.superoneagro.com | [email protected]
Heavy Duty Rotary Tiller (Single Speed Gear Drive)
Rotary Tiller is a secondary soil tillage machine which is powered by the power-take off drive of the
tractor and easily attached to the tractor by its three point hitch and used generally in fields, orchards
and vineyards for seed bed preparation, stubble ploughing and incorporation of organic materials into
the soil. This machine is more economical in power, time and fuel because the motion is transferred
from PTO by a gear system instead of chain system. The shafts of our machines are equipped with safety
brake lining so that it prevents giving damage to the machines by squeezed stones and foots. This type
of Rotary Tiller is more suitable for hard/sticky soils. Side gears are less prone to breakdowns in tougher
soil conditions.
"SUPER ONE" BENEFITS:
Fuel expenses saving can be to the tune of 15% to 40%.
Suitable for use in dry as well as wet land cultivation.
Suitable for light and medium soil conditions.
Used for loosening and aerating soil up to a depth of Eight inches.
VIJAY LAKSHMI AGRICULTURE P. LTD.
SUPER ONE AGRO – Farm Equipments Division Manufacturing: Export Unit – 1, Mugal Majra Road, Kunjpura, KARNAL - 132001 (HR) INDIA
+91.184.238.5200 / 5400 | www.superoneagro.com | [email protected]
Prepares seed beds quickly and economically.
It can immediately prepare the soil & the soil moisture of previous crop does not go waste.
Puddling in wet fields is done smoothly, quickly & efficiently.
"SUPER ONE" FEATURES:
Long lasting Italian Imported DYNA Blades made out of special quality wear resistant steel.
Genuine SKF Sealed bearings prevent moisture/mud entry.
High Quality Italian Imported DYNA Drive Shaft.
Well shaped adjustable rear Trailing Board & Heavy Duty Side Plates.
High Tensile 8.8 Grade Fasteners with Nylock Chrome Nuts.
Heavy Duty Rotor Pipes & Flanges.
Extra Heavy Duty Transmission Shaft & Side Gears. No Vibration & No Noise in Gear Box.
Specifications
SOA RT 40MS SOA 50MS SOA 60MS SOA 70MS SOA 80MS Tillage Width 1.20 Meters 1.50 Meters 1.80 Meters 2.10 Meters 2.40 Meters Tillage Depth 100mm - 200mm 100mm - 200mm 100mm - 200mm 100mm - 200mm 100mm - 200mm Tractor Power 25-30 HP 30-40 HP 40-48 HP 48-60 HP 60-75 HP No. of Blades 30 (DYNA Make) 36 (DYNA Make) 42 (DYNA Make) 48 (DYNA Make) 54 (DYNA Make)
Blades “L” Shape Italian “L” Shape Italian “L” Shape Italian “L” Shape Italian “L” Shape Italian Gearbox One Speed One Speed One Speed One Speed One Speed
Side Transmission Gear Gear Gear Gear Gear PTO Speed 540 RPM 540 RPM 540 RPM 540 RPM 540 RPM
Overload Protection Shear Bolt Shear Bolt Shear Bolt Shear Bolt Shear Bolt Bolts (High Tensile) 8.8 Grade 8.8 Grade 8.8 Grade 8.8 Grade 8.8 Grade
Nuts Nylock Chrome Nylock Chrome Nylock Chrome Nylock Chrome Nylock Chrome Rotor Speeds 212 RPM 212 RPM 212 RPM 212 RPM 212 RPM
Top Linkage (mm) 50x12 50x12 50x12 50x12 50x12 Lower Link Clamps SGI Casting 500/7 SGI Casting 500/7 SGI Casting 500/7 SGI Casting 500/7 SGI Casting 500/7 Anchor Pin (mm) 150x25 (Forged) 150x25 (Forged) 150x25 (Forged) 150x25 (Forged) 150x25 (Forged) Bearing Brackets SGI Casting 500/7 SGI Casting 500/7 SGI Casting 500/7 SGI Casting 500/7 SGI Casting 500/7 Chassis Support Tubular (Square) Tubular (Square) Tubular (Square) Tubular (Square) Tubular (Square)
Main Axle Bearing 6311 (SKF Make) 6311 (SKF Make) 6311 (SKF Make) 6311 (SKF Make) 6311 (SKF Make) Dear Axle Bearing 6309 (SKF Make) 6309 (SKF Make) 6309 (SKF Make) 6309 (SKF Make) 6309 (SKF Make) Weight (Approx.) 330 KGS 360 KGS 400 KGS 425 KGS 445 KGS
Specifications & Data provided above can be changed at any point of time without any prior notice a part of our “Continuous Product Development Policy”