Hardware system for elegant all-glass slidingdoors weighing from 80 kg to 160 kg(176 to 352 lbs.), with glass thicknesses of 10,12 and 12.7 mm (25
64 ", 1532" and 1
2").
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
22 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-1-767 91 91 Fax +41-1-767 91 78
Junior 80-120-160/GV Patents
D e s c r i p t i o nThe HAWA-Junior 80-120-160/GV is an extremely elegant hardwaresystem with top-fixed suspension. Its top-fixed suspension and glassretainer make it possible to combine stationary glass units and doorsinto harmonious complete solutions. Unsightly components such aslocks, suspension and guide plates, etc., are cleverly integrated intothe attractive profile so that they are no longer visible.
F e a t u r e s o f t h e H A W A - J u n i o r 8 0 - 1 2 0 - 1 6 0 / G V• Trolley hanger, sleave bearing mounted, highgrade polyamide
tandem rollers• Smooth and quiet operation• Vertical adjustment• Track stop with adjustable retainer• Elegant design• Precision glazing• Simple installation
HAWA-Junior 80/GV HAWA-Junior 160/GVHAWA-Junior 120/GV
Gla
sshe
ight
Floor-guide type
H a w a - a d v a n t a g eThanks to a special HAWA sus-pension profile it is possible touse either standard or customi-zed top-fixed suspension andglass retainers.
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-1-767 91 91 Fax +41-1-767 91 78 23
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 80-120-160/GV Patents
Bottom guide channels
Caution: Hole positions vary. mm/inch code
Bottom guide channel,alu plain anodized, predrilled
6000 (19'8 732") 13688
cut to size 13690
Grooved dowel pinstainless steel
Ø 6 x 40(15
64" x 1 3764")
13759
Top tracks to HAWA-Junior 80/GV
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
1400 (4'7 18 ") 10189
1600 (5'2 6364") 10190
1800 (5'10 5564") 10191
2000 (6'6 4764") 10192
2200 (7'2 3964") 10193
2500 (8'2 2764") 10194
3000 (9'10 764") 18532
4000 (13'1 3164") 18533
6000 (19'8 732") 10186
cut to size 10188
Top tracks to HAWA-Junior 120/GV
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
2500 (8'2 2764") 14866
3000 (9'10 764") 14867
4000 (13'1 3164") 14868
6000 (19'8 732") 14869
cut to size 14871
Top tracks to HAWA-Junior 160/GV
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
3000 (9'10 764") 10205
4000 (13'1 3164") 10206
5000 (16'4 2732") 10208
6000 (19'8 732") 10203
cut to size 10207
Partial set for single door, without tracks
code
HAWA-Junior 80/GV 14027
HAWA-Junior 120/GV 15293
HAWA-Junior 160/GV 14028
For two-panel sliding doors please order two sets for single doors.
HAWA-Junior 80/GV, partial set comprising
pieces code
Trolley hanger, M10, sleave bearingmounted, highgrade polyamidetandem rollers
2 10407
Suspension plate withhanger bolt M10 2 10476
Track stop with progressivelyadjustable retention spring catch 2 10628
Cover cap to top track, rubber, grey 2 10631
Screw-on rubber door stop 1 10629
Suspsension assembly lockingwrench 1 10778
HAWA-Junior 120/GV, partial set comprising
pieces code
Trolley hanger, M12, sleave bearingmounted, highgrade polyamidetandem rollers
2 14857
Suspension plate withhanger bolt M12 2 15294
Track stop with progressivelyadjustable retention spring catch 2 14858
Screw-on rubber door stop 1 10629
Suspsension assembly lockingwrench 1 14861
HAWA-Junior 160/GV, partial set comprising
pieces code
Trolley hanger, sleave bearingmounted, highgrade polyamidetandem rollers and hanger bolt M14
2 10424
Suspension plate, M14, with fixingscrews 2 10471
Track stop with progressivelyadjustable retention spring catch 2 10639
Screw-on rubber door stop 1 13114
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
24 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-1-767 91 91 Fax +41-1-767 91 78
Junior 80-120-160/GV Patents
Accessories
code
One-boltsafety lock
profile cylinder 17 mm (4364") 13856
round cylinder 22 mm (5564") 13857
square/hexagon socket 7/8 mm 13855
One-boltsafety lockwith bottomguide pin
profile cylinder 17 mm (4364") 13999
round cylinder 22 mm (5564") 14000
square/hexagon socket 7/8 mm 14076
Two-boltsafety lock
profile cylinder 17 mm (4364") 13785
round cylinder 22 mm (5564") 13786
square/hexagon socket 7/8 mm 13784
Deadbolt lock13 mm (33
64")for frontalmounting
for frame system 17917
with guide pin for 17964
stainless steelWNR 1,4301/AISI 304 18001
Thumbturn, dull chromium finish,with square pin 7 x 25 mm ( 9
32" x6364")
13789
Security rose 12 mm (1532"), for profile cylinder
17 mm (4364"), chromium-nickel steel 14147
Floor-mounted sleeve with oblong hole andchromium-plated brass spring 13787
Rosette for floor-mounted sleeve 13787 17326
Strike plate, chromium-plated steel 13130
Guide with plastic slider, rattle proof,13 mm (33
64") and suspension block 13781
Floor-mounted guide, plastic(safety lock not possible) 13318
Door guide, plastic(for use with safety lock) 13895
Floor guide, screw mounting, rattle proof,plastic, complete, for 8/10/12 (12.7) mm( 5
16 " / 2564" /
1532")(
12") glass,
dull chromium finish
16029
Bottom door stopper, dull chromium finish 17782
HAWA-Assembly wedge for HAWA-Junior 80/GV and 120/GV
code
HAWA-Assembly wedge for sliding doorsrunning in the ceiling, set for 1 sliding door(see installation drawing page 96)
15770
Accessories
code
Glass suspensionretainerprofile, alu unanodized
6500 mm (21'3 2932") 13576
cut to size 13681
Brush seal 2.6/18( 7
64" /4564")
1200 mm (3'11 14") 13791
Multi-purposesuspension,retainer profile alu,anodized, undrilled
6500 mm (21'3 2932") 10345
cut to size 12915
Suspension profilecover cap, plastic
black 13585
white 13760
Glass suspensionprofilecover cap, plastic
black 13586
white 13761
Set of glass fixing parts,for 1 sliding door(set of 4 pieces)
10 mm (2564") glass 13900
12 mm (1532") glass 13901
12.7 mm (12") glass 13902
Set of glass fixing parts,for 1 sliding door(set of 2 pieces)
10 mm (2564") glass 14166
12 mm (1532") glass 14167
12.7 mm (12") glass 14168
Fork spanner to glass holder insert 13817
Installation tool for blocking keys10/12/12.7 mm (25
64" /1532" /
12")
13710
H A W A - A s s e m b l y w e d g eThe HAWA-Assembly wedge opens up new design options for archi-tects and interior designers by permitting constructions in which thesliding doors run in the ceiling.
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-1-767 91 91 Fax +41-1-767 91 78 25
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 80-120-160/GV Patents
G l a s s - r e t e n t i o n e c c e n t r i cA glass-retention eccentric with side wedge permitsoptimum and simple attachment of the glass.
S e a l sThis system allows the integration of horizon-tal and vertical seals, which can also be ad-ded at a later date. We recommend usingtransparent glass-edge protection profiles forprotecting the vertical edge. These profilescan also be fitted with a vertical brush seal ifrequired.
Protective transparent edge trims
Glass mm/inch code
Protectivetransparent edgeprofile, plastic
10 mm(25
64")
3000(9'10 7
64")13822
6000(19'8 7
32")13600
12 mm(15
32")
3000(9'10 7
64")13908
6000(19'8 7
32")13907
12.7 mm(1
2")
3000(9'10 7
64")13912
6000(19'8 7
32")13911
Protectivetransparent edgeprofile for brushseal, plastic
10 mm(25
64")
3000(9'10 7
64")13826
6000(19'8 7
32")13601
12 mm(15
32")
3000(9'10 7
64")13910
6000(19'8 7
32")13909
12.7 mm(1
2")
3000(9'10 7
64")13914
6000(19'8 7
32")13913
Brush seals
code
Brush seal
3.5 mm( 9
64")roll 20 m(65'7") 13735
5 mm(13
64")roll 20 m(65'7") 13896
Double-sided adhesive tape forprotective edge trim
roll 50 m(164'0") 13988
Brush seal 2.6/18 x 1200 mm( 7
64" /4564" x 3'11 1
4")13791
G l a s s c u t o u t sFor installation purposes, the toughened safety glasshas to be prepared with cutouts. Glass thicknesses:10, 12 and 12.7 mm ( 25
64", 15
32" and 1
2").
silicone
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
26 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-1-767 91 91 Fax +41-1-767 91 78
Junior 80-120-160/GV Patents
Cutouts
code
Cutout for safety lock 17 mm (4364"), left, for double cylinder 17987
Cutout for safety lock 17 mm (4364"), right, for double cylinder
(Variotec GV/GR) 17988
Cutout for safety lock 22 mm (5564"), left, for double cylinder
(Variotec GV/GR) 17989
Cutout for safety lock 22 mm (5564"), right, for double cylinder
(Variotec GV/GR) 17990
Cutout for safety lock, left, square/hexagon socket(Variotec GV/GR) 17991
Cutout for safety lock, right, square/hexagon socket(Variotec GV/GR) 17992
Cutout left-hand for deadbolt lock, for side fixing(Variotec GV/GR) 17973
Cutout right-hand for deadbolt lock, for side fixing(Variotec GV/GR) 17974
Cutout deadbolt lock with guide pin, left(Variotec) 14186
Cutout deadbolt lock with guide pin, right(Variotec) 14187
Services
Service items such as cutouts for safety locks and cylinders as well as surfacetreatments are charged separately. Price on request.
Surface treatments
code
Powder-coated to RAL code 14163
Plain anodized, brushed 14626
Chrome effect, polished finish 14630
Stainless-steel effect, nickel-plated, brushed, mirror finish 14631
S a f e t y l o c kA single-bar safety lock is available for securingall-glass sliding doors: single-turn, with tempered barand 20 mm (25
32") feed, 17 or 22 mm ( 43
64" or 55
64") cylinder
aperture, or with 4/6 square/hexagon socket.Closure in floor-mounted sleeve with spring-loadedcover or in the bottom guide channel.
A c c e s s o r i e sAccessories see pages 96-98
O r d e r s p e c i f i c a t i o n s• Quantity of partial sets• Length of top track• Width and height of glass• Thickness of glass• Quantity and type of covering caps• Quantity and type of glass attachment parts• With or without brush profile• Quantity and type of bottom guide• Length of bottom guide channel• Type of safety lock• Type of protective edge profile
P l a n n i n g / i n s t a l l a t i o nFor planning and installation purposes, please use thefollowing installation drawings:code 14702 HAWA-Junior 80/GVcode 15469 HAWA-Junior 120/GVcode 14703 HAWA-Junior 160/GVcode 14706 HAWA-Fixed Glass
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-1-767 91 91 Fax +41-1-767 91 78 27
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 80-120-160/GV Patents
Stationary glass HAWA-Fixed Glass
code
Top-fixing plate set for stationary glass,with hanger bolt M12, HAWA-Junior 80/GV 14686
Top-fixing plate set for stationary glass,with hanger bolt M12, HAWA-Junior 120/GV 15472
Top-fixing plate set for stationary glass,with hanger bolt M12, HAWA-Junior 160/GV 14687
Bottom profiles for stationary glass
code
Bottom profile, alu plainanodized, undrilled
6000 mm(19'8 7
32")14691
cut to size 14692
O r d e r s p e c i f i c a t i o n s f o r H A W A - F i x e d G l a s s• Quantity and type of top-fixing plate• Length of bottom profile
S t a t i o n a r y g l a s s H A W A - F i x e d G l a s sYou can combine stationary glass designs and sliding doors to forma harmonious unit using our supplementary HAWA-Fixed Glass hard-ware components. In this way you can ensure the best possibleprerequisites for providing a uniform complete solution.
HAWA-Junior 80/GV HAWA-Junior 120/GV HAWA-Junior 160/GV
Gla
sshe
ight
Gla
sshe
ight
Floor-guide type