SLIDING DOORS SYSTEM
www.sevroll.com
HARMONYHARMONY is a modern and practical
system for free-standing wardrobes
System Harmony allows the construction of free-standing furniture, created with flush fitting unit fronts allowing a luxurious feel and the highest levels of comfort. Opening the doors requires only the most gentle pull. Handles can be positioned anywhere on the door fronts for increased flexibility. Extra smooth running gear with the addition of soft-closers provides a lightweight, smooth, gentle and quiet door slide, with doors that perfectly overlap each other when fully opened. When closed, the doors create a harmonious design without visible gaps. This offers the opportunity to incorporate doors with a great variety of designs, even wallpapered! Adding character to any interior.
Basic components of system HARMONY
Main advantages of system Harmony are:
• The wardrobe front forms a single plane when closed
• The door slide is smooth, gentle and quiet
• Closed doors create a harmonious design without visible tracks
NAME INDEX COLOUR LENGTH (mm)
One pack HARMONY
04387
SILVER
1800
04388 2000
04389 2200
04390 2500
04391 2700
04392 2900
DESCRIPTION (2 wings) QUANTITY (pcs)
Top track Harmony 1
Bottom track Harmony 1
Bottom guides middle 2
Bottom guide right 1
Bottom guide left 1
Rear bottom track support 7
Front bottom track support 7
Inner door mounting plate 2
Outer door mounting plate 2
Bottom supports 2
Stencil 1
Allen key 4 mm 1
Allen key 2.5 mm 1
Flat hex spanner 1
Screws ø4 x 16 60
Screws ø4 x 20 30
NEW!
Assembly instructions HARMONY
11
150
160
15
25
4 H
85
55
min
.60
35
wGG
T W
h=
H+
80
mm
HARMONY set (2 doors)
COMPONENTS
4x20- 30 pcs
Flat hex spannerLength: 1.8m; 2.0 m; 2.2 m; 2.5 m; 2.7 m; 2.9 m
4x16
- 60 pcs
Allen key4 mm
Allen key2.5 mm
x2
x7
x7x2
x1
x1
Top track / bottom track HARMONY Bottom guides
Bottom tracksupports
Bottom support
x2
x2
Door mounting plate
x1
x1
160
55
min
.60
W
181
211.3
w = (W + 2 x T - 2 x - ) : 2G G2 1
G1 to= 3 5 mm
1.8m; 2.0 m; 2.2 m; 2.5 m; 2.7 m; 2.9 mwidth of wardrobe interior - W
gap - G1
door wing width - w
door wing height - h h = H + 80
G2 to= 0 2 mm
T = 18 45 mmtothickness of wardrobe side - T
gap - G2
12 G2
Stencil
Max. weightof 60 kgper door
(ward
robe
heig
htw
ithoutplin
ths)
maximum door thickness(with handle) max. 56 mm
HARMONYSYSTEM
1. Top track installation
2. Hanging the door on top track
Move the top carriage to the centre (1)Loosen the bolt in the door mounting plate (2)
Insert the door mounting plate bolt to top carriageopening (3)Tighten (4)
left door
right door
3. Door fastening in the bottom trackleft door
right door
Slide bottom guides A and B into bottom support (1)then place in bottom track (2)
and tighten (3)
view from above
fit door mounting plates (A i B)
fit door mounting plates (A i B)
door mountingplate „B”
door mountingplate „A”
door mountingplate „A”
door mountingplate „B”